SerDes and its Role in Future Designs
|
|
|
- Ralph Rogers
- 5 years ago
- Views:
Transcription
1 SerDes and its Role in Future Designs Rod Strange Business Development Manager New Albany, Indiana Toll Free: (4TERASPD) USA & Canada Tel: TERASPEED CONSULTING A Division of Samtec 1
2 Serdes / Differential Pair The Future of High Speed Designs PCB material Stackup Crosstalk FWE (Fiber Weave Effect) Stubs & backdrilling Surface roughness IL/RL/FEXT/NEXT (Insertion/Return Loss/Crosstalk) BOR (Break Out Region) or signal launch DC blocking cap planes Bypass/Decoupling mounting inductance May TERASPEED CONSULTING A Division of Samtec 2
3 Differential Pair Skew Equal Skew Slower Frequency & t rise 200 mil / 5 mm - Skew at driver 10 Gb/s 1 Gb/s May TERASPEED CONSULTING A Division of Samtec 3
4 Reference Connectivity No Return Currents Path Differential pair with no via stitching No return current path close May TERASPEED CONSULTING A Division of Samtec 4
5 Reference Connectivity Stitching Vias for Return Currents Differential pair with via stitching Return current path close May TERASPEED CONSULTING A Division of Samtec 5
6 AC Losses Current in a Via Drill size Current flows on the outside of the hole May TERASPEED CONSULTING A Division of Samtec 6
7 AC Losses Current in a Via May TERASPEED CONSULTING A Division of Samtec 7
8 Differential Pair Capacitors Mounting Capacitance of Pads Pads Layer 1 Ground Layer 2 Layer 3 - no traces under the cutout Ground cutout Do not forget placement tolerance 2-4mils / µm May TERASPEED CONSULTING A Division of Samtec 8
9 Via Properties Stub Length Layer 1 Layer 3 When is this length important May TERASPEED CONSULTING A Division of Samtec 9
10 Via Stubs Bad Routing Top mount parts Stub Vias Trace inside of board PCB May TERASPEED CONSULTING A Division of Samtec 10
11 Via & PTH (Plated Thru Hole) Stubs Backdrilling Press fit connector Via PTH PCB May TERASPEED CONSULTING A Division of Samtec 11
12 Via & PTH (Plated Thru Hole) Stubs Press Fit Connectors Samtec has many Press fit connectors May TERASPEED CONSULTING A Division of Samtec 12
13 Backdrilling Options Notice Layers 8 & 10 May TERASPEED CONSULTING A Division of Samtec 13
14 PCB Performance Relative PCB Material Cost May TERASPEED CONSULTING A Division of Samtec 14
15 AC Losses 10 in / 25 cm Trace Loss vs Frequency: 1 GHz 50 GHz Skin SL Dielectric µs Skin µs Total SL Dielectric SL Total µs Microstrip (µs) vs Stripline (SL) May TERASPEED CONSULTING A Division of Samtec 15
16 AC Losses Stripline Trace Normalized to One Inch 26 Gauge Coax 36 Gauge Coax Fiber Cable 30 Reach 25 Reach 20 Reach PTFE Tachyon 15 Reach Megtron 6 FR408 PCB 10 Reach GL771 LTCC GZ41 10G 25G 50G 100G Normalized to 1 inch May TERASPEED CONSULTING A Division of Samtec 16
17 Teraspeed Examax 29 Inch Total Length Backplane Eight Adjacent Differential Pairs -10 db < -10 db Return Loss -25 db Insertion 12.5 GHz -50 db Low Crosstalk May TERASPEED CONSULTING A Division of Samtec 17
18 Via Properties 12 Layer Better Pad Stack Normal via High speed via May TERASPEED CONSULTING A Division of Samtec 18
19 Fiber Weave Effect FR4 Material Top View Pitch is 16.7 mils Different r s then different trace velocity 1080 May TERASPEED CONSULTING A Division of Samtec 19
20 Fiber Weave Effect FWE FR4 Material Side View Fiberglass Bundles r = 6.6 Epoxy r = 3.6 5mil / 125 µm trace Non-homogeneous material has ε r variation due to glass/epoxy ratio May TERASPEED CONSULTING A Division of Samtec 20
21 Fiber Weave Effect Skew & Insertion Loss Ideal Insertion Loss Penalty vs. Skew (ps) for 10G ps ps ps ps 35 ps ps Skew loss becomes significant above 25 ps for 10 Gbps. These results can be scaled for different bit rates. For 6.25 Gbps -3 db loss would occur at a skew of 80 ps, and -0.7 db of loss at 40 ps of skew. May TERASPEED CONSULTING A Division of Samtec 21
22 PCB Problems Copper Roughness How lossy is the trace Bob Carter May TERASPEED CONSULTING A Division of Samtec 22
23 PCB Problems Copper Roughness - Losses May TERASPEED CONSULTING A Division of Samtec 23
24 Differential Pair Rules TX/TX, RX/RX or Larger Spacing TX RX Crosstalk TX aggressor to TX victim Reverse crosstalk is reflected by Rs of driver then smaller or Rs = Z odd then no reflections Forward and reflected reverse are smaller at the receiver by board loss D F Crosstalk TX aggressor to RX victim Reverse crosstalk is terminated by Z Diff so full voltage NEXT at RX May TERASPEED CONSULTING A Division of Samtec 24
25 Capacitor Mounting Inductance What Mounting Do You Use? 0402 ph May TERASPEED CONSULTING A Division of Samtec 25
26 Functional or NOT Simulate, Simulate and Simulate More How do you know if your design will work? Higher speeds means rules of thumb don t work Many PCB designers think that the rules that they used at 8 Gbp/s will work at 16, 20, 24, 28+ Faster need a SI/PI engineer Part of the team SI/PI consulting May TERASPEED CONSULTING A Division of Samtec 26
27 May TERASPEED CONSULTING A Division of Samtec 27
28 New Albany, Indiana Toll Free: (4TERASPD) USA & Canada Tel: TERASPEED CONSULTING A Division of Samtec 28
2.92mm Connector Series
38 Performance Features Connector Series Materials/Finishes Website: www.ainfoinc.com Email: sales@ainfoinc.com Nominal Impedance 50ohm Housing: Type 303 Stainless Steel-Polished&Passivated Frequency Range
DEUTSCH H91 Series Filter Connectors MIL-DTL SERIES I
MIL-DTL-38999 Series I connectors are subminiature, environmental-class connectors with high and mediumdensity insert arrangements. They are used where a quickdisconnect coupling system is required for
Mounting Type Contact form Quick-connect Screw terminals PCB terminals. E-bracket SPST-NO G7L-1A-T G7L-1A-B
A High-capacity, High-dielectricstrength Relay Compatible with Momentary Voltage Drops No contact chattering for momentary voltage drops up to 0% of rated voltage. Wide-range AC-activated coil that handles
Power Relay RCE. Ordering Information. A High-capacity, High-dielectric-strength Relay Compatible with Momentary Voltage Drops
Power Relay A High-capacity, High-dielectric-strength Relay Compatible with Momentary Voltage Drops No contact chattering for momentary voltage drops up to 0% of rated voltage. Wide-range AC-activated
ESD Phenomena ESD Mitigation Techniques
ESD Phenomena ESD Mitigation Techniques Cyrous Rostamzadeh April 2, 2008 Cyrous Rostamzadeh 1 Opening Question: It has Failed, Why? April 2, 2008 Cyrous Rostamzadeh 2 Engineers get involved into System
Type Contact form Plug-in/solder Plug-in/solder PCB terminals Upper-mounting terminals terminals with plug-in/solder
A Miniature Power Relay Equipped with arc barrier. Dielectric strength: 2,000 V. Built-in diode models added to the LY Series. Single-pole and double-pole models are applicable to operating coils with
Multi-rate 10-Gigabit DWDM 40km XFP Transceiver with Digital Diagnostics
Multi-rate 10-Gigabit DWDM 40km XFP Transceiver with Digital Diagnostics TXD3XGGIx000xxG Pb Product Description The TXD3XGGIx000xxG DWDM XFP multi-rate fiber optic transceivers with digital diagnostics
PCB Relay G8P. Ordering Information. Small, Low-Cost 30-A Power Relay for PCB Applications. Accessories (Order Separately)
PCB Relay Small, Low-Cost 0-A Power Relay for PCB Applications Small, yet capable of switching up to a 0-A loads. Inexpensive. Ideal for home and industrial appliances, HVAC (heating, ventilating, and
Plug-in/solder terminals with LED indicator
General-purpose Relay LY Electromechanical Relays A Miniature Power Relay Equipped with arc barrier. Dielectric strength: 2,000 V. Built-in diode models added to the LY Series. Single-pole and double-pole
ASXPRESS PLUS Rapid Sample Introduction System
ASXPRESS PLUS Rapid Sample Introduction System ACCESSORIES AND PARTS CATALOG Catalog part number 620095 Rev 3, June 2018 Sample Probe, Carbon Fiber, 1.0 mm Probe material: Carbon Fiber Probe size: 1.0
General-purpose Relay
General-purpose Relay A Miniature Power Relay Equipped with arc barrier. Withstand : 2,000 V. RC+Y LR Ordering Information Open Relays Type Contact form Plug-in/solder terminals Plug-in/solder terminals
10 A at 100 to 240 VAC. G3NE-220T-US (20 A at 75 to 264 VAC) 5 A at 100 to 240 VAC
Solid State Relays G3NE Compact, Low-cost, SSR Switching 5to20 A Wide load voltage range: 75 to 264 VAC. Dedicated, compact aluminum PCB and power elements used. Built-in varistor effectively absorbs external
Amphenol RF Interconnects TNC 31 Series Threaded Lock RF Connector System Materials
TNC 31 Series Threaded Lock RF Connector System Materials Body/Finish Contacts Centre MALE Centre FEMALE Insulator Gasket Crimp Ferrules* *Metal finishes Durability Brass/Nickel Brass/Gold Plated (Au)
PN-3, PN-4 Powernode Enclosures
PN-3, PN-4 Powernode Enclosures Addendum to Site Preparation and Installation Manual Effective: March, 2001 200 2 031-103-C1-001 Rev. A 2001 031-103-C1-001 Rev. A March, 2001 2001 Alpha Technologies Introduction
Sample MDF Rack Elevation
SAMPLE Ports 1-24 4 8 12 16 20 24 Ports 25-48 28 32 36 40 44 48 ASYNC 1 ASYNC 2 A1 A2 CONSOLE Power Status Console 10/100 BASE-TX Tx Rx VG 248 100 Link STAT RPS SYST DU PLEX SPEED POE MODE STAT RPS SYST
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. One-piece connector body: Fastest assembly Field installable Anaerobic epoxy
USER MANUAL. Tavor 8-T Active Ceiling Speaker MODEL: P/N: Rev 4
KRAMER ELECTRONICS LTD. USER MANUAL MODEL: Tavor 8-T Active Ceiling Speaker P/N: 2900-300343 Rev 4 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Safety Instructions
Introduction 2. Other Applicable Documents 2. Scope of Delivery 3. Attaching the Snap-on Ferrite Suppressor 4
H-206.F2 6-Axis Precision Alignment System Contents Introduction 2 Other Applicable Documents 2 Scope of Delivery 3 Attaching the Snap-on Ferrite Suppressor 4 Connecting the Hexapod to the C-887 with the
Insulated Tools. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P Insulated Tools r o f e s s i o Klein insulated tools maintain the highest level of quality Klein is known for, and they offer added protection against shock from energized sources with voltage
Automated Tiki Torch Installation Instructions
Automated Tiki Torch Installation Instructions Automated Tiki Torch with Poles (Exploded View) 14 Automated Tiki Head 6 8 Tiki Pole (Powder Coated Aluminum or Faux Bamboo Pole) 18 Base Pole (Powder Coated
Tip-Over Switches - Non Mercury Contacts
Tip-Over Switches - Non Mercury Contacts SWITCH OPERATION CW172-1 CW1740-1 CW12-0 Tip-over switches are designed to switch on/off when tilted from the vertical position. CW12-0 CW12-1 0.2 ± 10 Ω at Vdc
General-Use Auto-Tuning HPX-T Series
General-Use Auto-Tuning HPX-T Series Built-in Hyper-tuning automatically adjusts scanning characteristics. Adjustment steps, results and scanning conditions are digitally displayed by LED. Digital display
Crimp & Cleave Termination Instructions
A Furukawa Company Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for 200 µm and 400 µm ST and SMA Connectors For Use With: 200 µm and 400 µm ST and SMA Termination Kits 200
CEELOK FAS-T CONNECTORS
CEELOK FAS-T CONNECTORS Small Form Factor, Field Terminable Connectors CeeLok FAS-T connectors ofer a small form factor, ield terminable I/O connector capable of 0 Gb/s Ethernet. Crimpsnap contacts enable
Crimp & Cleave Termination Instructions
Crimp & Cleave Termination Instructions for 200 µm Factory5 Cable with ST and SMA Connectors For Use With: 200 µm ST and SMA Factory5 Termination Kits 200 µm HCS Factory5 Fiber-Optic Cable ST and SMA Factory5
Total solder points: 129 Difficulty level: beginner advanced LIQUID LEVEL CONTROLLER K2639 ILLUSTRATED ASSEMBLY MANUAL
Total solder points: 129 Difficulty level: beginner 1 2 3 4 5 advanced LIQUID LEVEL CONTROLLER K2639 Forgotten to turn off the tap, leaking washing machines,... Prevention is better than cure. So use this
Crimp & Cleave Termination Instructions for 200 µm Factory5 Cable with ST and SMA Connectors
Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for 200 µm Factory5 Cable with ST and SMA Connectors For Use With: 200 µm ST and SMA Factory5 Termination Kits 200 µm HCS Factory5
TANK MONITOR MODEL # (12V DC) (24V DC) (32V DC) OPERATION AND INSTALLATION INSTRUCTIONS
TANK MONITOR MODEL # 1510012 (12V DC) - 1510024 (24V DC) - 1510032 (32V DC) OPERATION AND INSTALLATION INSTRUCTIONS WARNING: Raritan Engineering Company,Inc.recommends that a qualified person install this
Wire and Cable Holders
WIRE MANAGEMENT Wire and able Holders For low cost wire management. The push-mount style comes in vertical orientation for top entry and narrow width, and horizontal orientation for side entry and low
MOTORIZED OR MANUAL LATERAL ARM BOX AWNING. Product Overview... 1 Component Checklist... 2
INSTALLATION MANUAL FREEDOM AWNING RV MOTORIZED OR MANUAL LATERAL ARM BOX AWNING TABLE OF CONTENTS Product Overview... 1 Component Checklist... 2 Installation... 3 Attaching the Mounting Plates... 3 Mounting
Limit Switches. 6.2 E47 Precision Switches
Limit Switches E47BMS02 E47BMS11 E47BMS40.2 Product Description............................................. 2 Approvals..................................................... 2 Features and Benefits...........................................
Model. Oasis Automatic and Manual RV Door Awning System INSTALLATION & OPERATING INSTRUCTIONS
Oasis Automatic and Manual RV Door Awning System USA SERVICE OFFICE Dometic Corp. 509 So. Poplar St. LaGrange, IN 46761 260-463-4858 CANADA Dometic Dist. 866 Langs Dr. Cambridge, Ontario CANADA N3H 2N7
Strut Clamp Pipe & Conduit
PRODUCT SPECIFICATIONS 0F Strut Clamp Pipe & Conduit Size: Steel pipe sizes 2" through 0" Finish: Electro-Galvanized Pipe clamps are designed to fit into the opening of 5 /8" wide channel profiles Pre-Assembled
How to make a solar campfire
How to make a solar campfire Introduction: The solar campfire is one of the four options for a 'message carrier' of the 'scouts go solar' project. It is best combined with a solar suitcase, i.e. use the
TABLE & FURNITURE LEGS
LEGS & LEVELERS TABLE & FURNITURE LEGS Furniture Levelers Furniture levelers from, perfect for entertainment and built-in shelving units. Table Legs The PMI Table Leg line has been very popular for more
Crimp & Cleave Termination Instructions for 200 µm F07 Connectors
Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for 200 µm F07 Connectors For Use With: F07 Termination Kits 200 µm HCS Fiber-Optic Cable F07 Crimp & Cleave Connectors Important
Automated Tiki Torch Installation Instructions
Automated Tiki Torch Installation Instructions Automated Tiki Torch with Poles (Exploded View) 14 Automated Tiki Head 6 8 Tiki Pole (Powder Coated Aluminum or Faux Bamboo Pole) 12 Base Pole (Powder Coated
Smallest Connector with Removable Contacts
1 Ultra-Miniature 8STA Size 01 Connectors Smallest Connector with Removable Contacts Ultra compact design and very lightweight connector dedicated to the harshest of motorsport environments. Innovative
INSTRUCTION MANUAL ALEKO RETRACTABLE AWNING
INSTRUCTION MANUAL for ALEKO RETRACTABLE AWNING www.alekoproducts.com FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY! 1 Important Safety Precautions WARNING NOTE: FOR PERSONAL SAFETY,
Crimp & Cleave Termination Instructions for 200 µm Harsh Environment SMA
Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for 200 µm Harsh Environment SMA For Use With: 200 µm HE SMA Termination Kit 200 µm HCS Fiber-Optic Cable HE SMA 200 µm Crimp
Induction Motors. Standard AC Motors. Constant Speed Motors. Standard AC Motors C-19. Induction Motors
Standard AC Standard AC Constant Speed Constant Speed Torque Brake V Series TM Series Torque Page Features and s of C-20 General Specifi cations C-28 (6 W 90 W) C-30 IP65 Terminal Box C-48 () C-61 2-Pole,
Sealing and terminating Wrexham Mineral Cables
Sealing and terminating Wrexham Mineral Cables A Termination is required at both ends of each length of cable, and it should be fitted as soon as the cable has been prepared. A complete termination consists
Product Specification
HDBNC-BH1 Jack, Right Angle Orientation, PCB Terminated HDBNC-CA Plug, Straight Orientation, Cable Terminated Other configurations available for: Vertical cable-to-board applications Through-hole, edge
HEATER POWER CONTROLLER
HEATER POWER CONTROLLER /04 Rev 0 - - ii PROCON MODEL HPC TABLE OF CONTENTS DESCRIPTION... MANUAL REVISIONS... 5 WARRANTY... 5 SPECIFICATIONS... 6 DRAWINGS PHYSICAL DIMENSIONS 44-090095-0-00... 7 PANEL
2M804 Push-Pull Crimp Receptacles Ordering Guide for 2M , 002, 003, 004
Push-Pull Crimp Receptacles Ordering Guide for -001, 002, 003, 004 Micro38999 1. 2. 3. 4. 5. 6. 7. SERIES SHELL SERVICE SHELL SIZE-INSERT CONTACTS KEYING SUFFIX STYLE CLASS ARANGEMENT -00X -06 ZNU 6-7
SIZE RANGE: 1 TO 10. PRESSURE RANGE: FULL VACUUM TO 275 psi
2 3 4 5 HANDLE OPTION ITEM DESCRIPTION STANDARD MATERIAL 1 Wrench - Locking Durcor -62 2 Hex Head Cap Screw 316 Stainless Steel 3 Washer 18-8 Stainless Steel 4 Wrench Stop Plate - Locking 304 Stainless
12V MOTION SENSOR 98GC779G INSTALLATION & PROGRAMMING GUIDE REV RV AWNING PRODUCTS
12V MOTION SENSOR 98GC779G INSTALLATION & PROGRAMMING GUIDE REV.07242015 RV AWNING PRODUCTS 1361 CALLE AVANZADO, SAN CLEMENTE, CA 92673 (800) 382-8442 FAX (949)276-5500 www.girardrv.com Girard Systems
Operational Unit. Number of Positions: 2 Positions/3 Positions. Applicable Colors. Non-illuminated: Black Illuminated: Red, green, yellow, blue
Complete Assemblies Knob-type Selector Switch Install in 22-mm dia. or 25-mm dia. Panel Cutout H Illuminated and Non-illuminated models H Locking lever ensures easy mounting and removal of switch unit
Induction hardened cutting knives for long life. Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
Klein insulated tools combine excellent functionality along with reduction of risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts. Electrician's (EINS)
Table of Contents. How long do the batteries last?
Table of Contents Introduction... 1 Basic Operation... 2 Sound... 3 Graph Display Selection... 4 Basic Displays... 4 Altitude vs. Time 4 Temperature 4 Lapse Rate 4 Airspeed... 5 Glide Path 5 Airspeed 5
2M Hermetic General Information. Why 2M Hermetic? GHEC 81. Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard. Page Guide.
2M General Information Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard Averaging less than half the size and weight of their 38999 ancestors, Amphenol s 2M Micro38999 series are an
Electrician's Insulated Tools
Klein insulated tools combine excellent functionality along with reduction of risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts. ~ Electrician's FORGED
FREEDOM WM AWNING MOTORIZED OR MANUAL LATERAL ARM BOX AWNING. Product Overview... 1 Component Checklist... 1
INSTALLATION MANUAL FREEDOM WM AWNING RV MOTORIZED OR MANUAL LATERAL ARM BOX AWNING TABLE OF CONTENTS Product Overview... 1 Component Checklist... 1 Installation... 3 Attaching the Mounting Plates... 3
DETECTING CRACKS UNDER BUSHINGS WITH ROTATIONAL REMOTE-FIELD EDDY CURRENT PROBES
DETECTING CRACKS UNDER BUSHINGS WITH ROTATIONAL REMOTE-FIELD EDDY CURRENT PROBES Yushi Sun, Tianhe Ouyang, Jie Long 2501 N. Loop Drive, Ames, IA 50010 Jeff Thompson, Jeff Kollgaard Boeing Commercial Airplanes
Termination Procedure LC 1.6mm & 2.0mm Connectors: 1060XX Series
Connector Piece Parts LC Simplex Connector Boot LC Duplex Connector LC Connector CriMp Tulolng LC Duplex Clip Boot 86001-0110, Rev. B USN30MFO/5/2010 Procedure Chart Procedure Tool Required Tool Part Number
Insulated Tools S 9 R O T E CTI Y N
Insulated Tools Klein insulated tools maintain the highest level of quality Klein is known for, and they offer added protection against shock from energized sources with voltage up to 1000 volts. Insulated
Primary Cable. Wire and Cable. XX = Color Coded Description, 00 = Units of Measurement, Call for Current Pricing
SUBHEAD PRIMARY CABLE Primary Cable Under 6AWG meets UL 1015-1230 Over 6 AWG meets UL 1426 & BC-5W2 221 F (105 C) dry and 167 F(75 C) wet 600 volt rating Class K 30 gauge tinned copper conductors BK =
Trapped Key Transfer System SHGV SVM SVE
Trapped Key Transfer System SHGV SVM SVE Description Area of application Cost Savings The SHGV key transfer system occurs mainly in more complex manufacturing systems and equipment. It is especially suitable
Crimp & Cleave Termination Instructions
Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for 200 µm Harsh Environment SMA For Use With: 200 µm HE SMA Termination Kit 200 µm HCS Fiber-Optic Cable HE SMA 200 µm Crimp
2522 and 2523 Fiber Optic Splice Organizer Tray
2522 and 2523 Fiber Optic Splice Organizer Tray Instructions February 1996 Issue 1, 34-7039-6256-2 1 Table of Contents 1. General... 3 2. Kit Contents... 3 3. Available Kits and Accessories... 4 4. Tray
BUILT-IN OVEN SAFETY
UILT-IN OVN SFTY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. lways read and obey all safety messages.
FILTERED FAN PACKAGES
FILTERED FAN PACKAGES PLASTIC & METAL FILTERED FANS EFFICIENT, QUITE BALL BEARING MOTORS NEMA TYPE 1 AND 3R ALL KITS INCLUDE GASKETS, HARDWARE, AND TEMPLATE UL LISTED Plastic FILTER FAN PACKAGES Injection
Supplementary protector S 200 MR for ring-tongue applications acc. to UL 1077
Electrical installations in buildings for ring-tongue applications acc. to UL 1077 S 200 MR is a high-performance supplementary protector with ring cable lug connections conforming to UL, CSA, and IEC
NEWMAR SERVICE SCHOOL
NEWMAR SERVICE SCHOOL TRAINING INFORMATION GUIDELINE FOR FEBRUARY 2013 OUR PRODUCTS: NOVA DUAL PITCH AWNING G-2000/ G-1500 2 P a g e G-2085 G-5000 3 P a g e G-LINKS 4 P a g e NOVA/ G-2000/ G-1500 BASIC
Slit Loom Installation Tool. Spools and Bags. Bulk Boxes
Looms and Tubing Polyethylene Slit Loom Slit seam construction allows for easy wire insertion and repair, yet retains wire even when bent or twisted. Maximum temperature 93 C (200 F). Ideal for protecting
ANODIZED ALUMINUM STAINLESS CONSTRUCTION
ANODIZED ALUMINUM or STAINLESS CONSTRUCTION Engineering / Sales: NueAir Prods. Cinti, OH 45215 Toll Free: 1-888-560-7027 sales@nueair.com NEX FLOW SILENT X-STREAM AIR BLADE AIR KNIFE SILENT X-STREAM AIR
NEW PRODUCT. Get. Induction Ready. pg 1. Steam. new product supplement book. pg 5. brownefoodservice.com
NEW PRODUCT Get Induction Ready pg 1 1 Steam and Pour pg 5 GET INDUCTION READY INDUCTION ALUMINUM FRY PAN the aluminum fry pans you trust, now with induction capability. 1 2 3 4 Stainless steel base allows
JBL VT4882. Technical Manual SPECIFICATIONS JBL VT4882 REV S
Technical Manual JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A. SPECIFICATIONS ACOUSTIC & ELECTRICAL SPECIFICATIONS: Nominal Impedance: 8 ohms, each transducer
Zinc Cable & Conduit Connectors For Armored Cable, Flexible Metal Conduit & Metal Clad Cable
Zinc Cable & Conduit Connectors For Armored Cable, Flexible Metal Conduit & Metal Clad Cable Type FC Set Screw To terminate regular wall steel or aluminum flexible conduit to a 1/2 knockout in a dry location
Terminals & Connectors
Your Connection Since 1970 Terminals & Connectors 2 TABLE OF CONTENTS Adapters........................... 13 Brazed Barrel Lugs................... 16-17 Bullet Connectors....................9-10 Butt Connectors.......................3
Fiber Optic Hand Tools
Fiber Optic Hand Tools Miller Fiber Optic Hand Tools FO 103-T-250-J Tri-Hole Fiber Optic Stripper New three-hole model performs all common fiber stripping functions in one compact tool. Hole for removal
Aircraft Noise. Why Aircraft Noise Calculations? Aircraft Noise. SoundPLAN s Aircraft Noise Module
Aircraft Noise Why Aircraft Noise Calculations? Aircraft Noise Aircraft noise can be measured and simulated with specialized software like SoundPLAN. Noise monitoring and measurement can only measure the
SAFEPLAST HOSE PROTECTORS for full hose and personal protection SAFEPLAST always a safe choice!
SAFEPLAST HOSE PROTECTORS for full hose and personal protection SAFEPLAST always a safe choice! www.safeplast.fi www.safeplast.fi 2 ABOUT SAFEPLAST OY Safeplast Oy was founded, and is based, in Finland.
PN 3000 Series Fail Closed Pneumatic Actuators
PN 3000 Series Fail Closed Pneumatic Description A of compact linear actuators having 5 diaphragm sizes for matching the requirements of 1/2" to 4" Spira-Trol valves at various differential pressures.
Trimble Yuma 2. Product descriptions available at and mcsistore.trimble.com 4-1
Trimble Yuma 2 The Trimble Yuma 2 rugged tablet computer is a fully-functional field computer featuring the Microsoft Windows 7 Professional operating system, with a 1.6 Ghz Intel Atom dual-core processor,
S E L E C T I O N. Abdominal Crunch. User manual
and S E L E C T I O N T H E S T R E N G T H E V O L U T I O N User manual and and The identification plate of the and manufacturer, affixed along side the seat on the frame of the weight stack, gives the
General Purpose High Power PCB Relays
T9 Series Two-pole 3A PCB or Panel Mount Relay n A, form A (NO) and form C (CO) switching capability n Designed to control compressor loads to 3.5 tons, LRA / 5.3FLA n Meets requirements of UL 58 and UL
MasterCraft Additional Ballast
Barefoot International & Fly High Mfg. 3879 North Richards Street Milwaukee, WI 53212 Phone: 414-964-3668 Fax: 414-964-5767 E-Mail: orders@fatsac.com Web: www.fatsac.com MasterCraft Additional Ballast
Product Overview... 1 Component Checklist...2
INSTALLATION MANUAL FREEDOM AWNING RV MOTORIZED PATIO BOX AWNING TABLE OF CONTENTS Product Overview... 1 Component Checklist...2 Installation... 3 Installation Using an Awning Rail...3 Installation Using
QK-CE220RL V02 230V. CONTROL BOARD FOR A 230V ac SINGLE-PHASE MOTOR PLUG & PLAY. 433,92 MHz
user manual QK-CE220RL V02 CONTROL BOARD FOR A 230V ac SINGLE-PHASE MOTOR 230V 433,92 MHz PLUG & PLAY CONTENTS INTRODUCTION MAIN FEATURES OF THE CONTROL BOARD TECHNICAL DATA INSTALLATION LAYOUT AND CONNECTIONS
Scale Drawing of Roller Coaster
Scale Drawing of Roller Coaster Worksheet #4 Name Directions: Below is a scale drawing of a portion of the Millennium Force, a roller coaster located in Cedar Point Amusement Park in Ohio. Answer the questions
Air inlet. 1. Drilled Pipe - Typically drilled pipe uses more compressed air while producing inconsistent flow at high noise levels.
Air inlet SILENT X-STREAM AIR LADE AIR KNIFE SILENT X-STREAM AIR LADE AIR KNIFE APPLICATIONS: Cleaning of steel sheet in strip mills Parts drying Cleaning or drying web processes. Pre-paint drying and
AWNING CONTROL KIT 98GCK-33B
AWNING CONTROL KIT 98GCK-33B REV.07282015 RV AWNING PRODUCTS 1361 CALLE AVANZADO, SAN CLEMENTE, CA 92673 (800) 382-8442 FAX (949)276-5500 www.girardrv.com AC MOTOR CONTROL MODULE GC274B INSTALLATION and
Alien Flier Zip Line Products Installation/Owner s Manual
Alien Flier Zip Line Products Installation/Owner s Manual 1 Table of Contents SAFETY PLEASE READ CAREFULLY... 4 Constructing your Zip Line Xtreme Models... 6 Installing your Alien Flier Trolley on an Existing
Hiway Gateway Specification and Technical Data
L Hiway Gateway Specification and Technical Data HG03-400 8/92 detergant coffee chocolate Page 2 TDC 3000 Hiway Gateway Specification and Technical Data Introduction This publication defines the significant
Electrical Specifications. Input range Vac (Operating) 115/230 Vac (Nominal) Internal fuse on both L and N lines.
POWER Data Sheet L Watts onvection/onduction Mounting Total Power: W # of Outputs: Single Outputs: 1,, 8 V Special features W full power at elevated temperatures Wide operating temperature range suited
a Nexans company Catalogue 2009
a Nexans company Catalogue 2009 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium
E2 Motors and Motor Starting. #1 Fan Motors
E2 Motors and Motor Starting #1 Fan Motors Basic Electric Motor Stator Stationary electromagnet Rotor Rotating magnet Movement of the rotor Rotates by repulsion and attraction of stator 2005 Refrigeration
Unshielded Fluid Hose Kit
Instructions Unshielded Fluid Hose Kit 308688C Kit Part No. 238995 Kit for converting the PRO 5500wb Spray Gun and the PRO Auto Xs wb Spray Gun to allow the use of a bare PTFE(unshielded) fluid hose. Order
Part 9 MAINTENANCE MANUAL. Distribution Construction Standards Handbook
Part 9 MAINTENANCE MANUAL Distribution Construction Standards Handbook General Notes: The Maintenance Manual (MM series) is a collection of drawings for superseded construction standards. These can be
RT INTERNATIONAL CATALOGUE TOOLS FOR EVERY APPLICATION LEADERS IN THE FIELD OF JEWELLERY TOOLS AND EQUIPMENTS
RT INTERNATIONAL LEADERS IN THE FIELD OF JEWELLERY TOOLS AND EQUIPMENTS CATALOGUE TOOLS FOR EVERY APPLICATION SINCE 2010 13 ABOUT US Established in the year 2010, Our pursuit of getting outstanding recognition
Pilot kick type 2 port solenoid valve (general purpose valve) Air, low vacuum (1.33 x 10 3 Pa (abs)), water, kerosene, oil (50 mm 2 /s or less)
(general purpose valve) ADK11/ADK12 Series NC (normally closed) type, NO (normally open) type Port size: Rc1/4 to Rc1 Diaphragm structure Excluding ADK12 JIS symbol ADK11: NC (normally closed) type OUT
2M801 Dual-Start ACME Threads
Dual-Start ACME Threads Ordering Guide for 1. 2. 3. 4. 5. 6. SERIES SHELL STYLE SERVICE CLASS SHELL SIZE-INSERT AGGMT CONTACTS KEYING -007-01 C 5-3 P A 1. SERIES Type Part # Description PLUG CRIMP PCB
HPX-ET Series. Gang-Mounted Remote Cluster
Gang-Mounted Remote Cluster HPX-ET Series Connector connection type 16-unit gang-mounting sensors strongly support the request for wiring and space savings. Distributed remote cluster arrangement is a
macleanpower.com Fiberglass Utility Crossarms
macleanpower.com Fiberglass Utility Crossarms Fiberglass Crossarms Outer Veil for added UV protection Fiberglass mat provides beam rigidity and strength for reduced deflection under load High density closed
GO TO INDEX NEXT PAGE B&K PRODUCT SPECIFICATIONS B & K. Gauge CALL: BK-TANK FAX: B&K TANK GAUGE COMPANY
GO TO INDEX NEXT PAGE B&K PRODUCT SPECIFICATIONS B&K B & K Tank 74 75 Gauge 73 71 72 Company 70 69 SINCE 1946 CALL: 1-800-4BK-TANK FAX: 908-722-8585 B&K TANK GAUGE COMPANY division of Summit Systems Inc.
The size of workstation cabinet is 48"x27"x36" high approx. with laminated finish top and sides. [Request Quotation / More info...
Peg Boards / Perceptual Motors We have wide range of Peg Boards for improving balance, hand-eye coordination and other perceptual motor functions. IMI - 1551: Multi-Activities work station (Upper Extrimities)
Conservatory awning W8 Description
1 3 4 Application Large-area external sun shading system for shading glazed conservatories, patio roofs and pergolas with flat pitch roofs. Function principle: tensioning system via toothed belt with steel
KITS P /2/01 4:40 pm Page 29 Kits 29 #
29# Kits Clip-On Twisted Pair Kit The Clip-On Twisted Pair Kit combines the most commonly used tools for terminating voice and data cabling into an easy to carry kit that mounts on the contractor s belt.
Parts Catalog. Slicing Machine G10. Model:
, 07 995079 ECN 96 Parts Catalog Slicing Machine G0 Model: G0 /8/7N Rev. E, Serial Number 4048 and Up IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER