Multi-rate 10-Gigabit DWDM 40km XFP Transceiver with Digital Diagnostics

Size: px

Start display at page:

Download "Multi-rate 10-Gigabit DWDM 40km XFP Transceiver with Digital Diagnostics"

Susan Perry
5 years ago
Views:

Multi-rate 10-Gigabit DWDM 40km XFP Transceiver with Digital Diagnostics TXD3XGGIx000xxG Pb Product Description The TXD3XGGIx000xxG DWDM XFP multi-rate fiber optic transceivers with digital

1 Multi-rate 10-Gigabit DWDM 40km XFP Transceiver with Digital Diagnostics TXD3XGGIx000xxG Pb Product Description The TXD3XGGIx000xxG DWDM XFP multi-rate fiber optic transceivers with digital diagnostics monitoring functionality provide a quick and reliable interface for 40km 10Gbps DWDM applications. The diagnostic functions, alarm and warning features as described in the XFP Multi- Source Agreement (MSA) are provided via standard I C serial interface. The transceivers are compliant with the XFP Multi-Source Agreement and are designed to support SONET/SDH, 10G Ethernet, and 10G Fiber Channel data rates from 9.95Gb/s to 11.09Gb/s. Each transceiver utilizes an electro-absorption modulator integrated laser with an operating wavelength in full compliance with 100GHz (0.8nm) spacing per the -grid. The transceivers satisfy Class I Laser Safety requirements in accordance with the U.S. FDA/CDRH and international IEC standards. The transceivers connect to standard 30-pad XFP connectors for hot plug capability. This allows the system designer to make configuration changes or maintenance by simply plugging in different types of transceivers without removing the power supply from the host system. The transmitter and receiver DATA interfaces are AC coupled Current Mode Logic (CML). L-TTL Transmitter Disable control input and Loss of Signal output interfaces are also provided. The transceivers operate from +3.3 and +5.0 power supplies over an operating case temperature range of -5 C to +70 C (Commercial), -5 C to +85 C (Extended), or -40 C to +85 C (Industrial). Features Lead Free Design & Fully RoHS Compliant Compliant with XFP MSA Compliant with OC-19/STM-64 Compliant with -T G.709 Support DWDM 10G Ethernet Applications Support 10G Fiber Channel Applications Digital Diagnostics Monitoring Temperature-stabilized EML Transmitter Low Power Consumption Wide Case Range Transmission up to 40km Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Storage Temperature T ST C Commercial Operating Case Temperature 1 Extended T OP C Industrial Supply oltage CC CC Operating Relative Humidity RH 0 85 % Input oltage IN 0 CC 1 Case temperature is measured on top side of XFP module. Non condensing

Transmitter Performance Characteristics (Over Operating Case Temperature Range) Parameter Symbol Minimum Typical Maximum Units Operating Data Rate B 9.95-11.

2 Transmitter Performance Characteristics (Over Operating Case Temperature Range) Parameter Symbol Minimum Typical Maximum Units Operating Data Rate B Gb/s Average Optical Output Power (50% duty cycle) P O dbm Transmitter OFF Power P OFF dbm Extinction 9.95Gb/s to 10.7Gb/s ER db 1 λ C See Ordering Information Table nm Spectral Width (-0dB) Δλ nm Side Mode Suppression Ratio SMSR db Relative Intensity Noise RIN db/hz Reflectance Tolerance ref T db 0 khz 80 MHz JG Jitter Generation 3 0K UI pp 4 MHz 80 MHz JG 4M UI 9.95Gb/s (10-1 BER) Dispersion Penalty 4 DP 11.09Gb/s (10-4 BER) Optical Output Eye Compliant with GR53-CORE, IEEE 803.3ae, and -T G BOL: +/-0.05nm from grid. EOL: +/-0.1nm from grid. Measured with OSA and 0.1nm resolution bandwidth. 3 Jitter generation is compliant with GR-53 and G.851. Receiver Performance Characteristics (Over Operating Case Temperature Range) Parameter Symbol Minimum Typical Maximum Units Operating Data Rate B Gb/s of Operation λ nm Receiver 9.95Gb/s (10-1 BER) Pmin Gb/s (10-4 BER) Maximum Input Power P MAX dbm LOS Thresholds Increasing Light Input P los Decreasing Light Input P los dbm LOS Hysteresis db Receiver Reflectance db dbm Laser Safety: All transceivers are Class 1 Laser products per FDA/CDRH and IEC-6085 standards. They must be operated under specified operating conditions. Oplink Communications, LLC. This product complies with 1 CFR and Meets Class I Laser Safety Requirements Oplink Communications, LLC

3 Electrical Interface (Over Operating Case Temperature Range) Parameter Symbol Minimum Typical Maximum Units Differential Impedance Z d Ω Differential Input oltage Swing pp, diff_in m Differential Output oltage Swing pp, diff_out m Output Rise/Fall Time (0 to 80%) T r /T f ps TX_Dis, P_Down/RST IL IH.0 - CC XFP Interrupt, Mod_NR, RX_LOS OL OH host_ CC host_ CC Electrical Power Supply Characteristics (Over Operating Case Temperature Range) Parameter Symbol Minimum Typical Maximum Units Power Supply oltage CC CC Supply Current I CC I CC ma Power Dissipation PW W P_Down Power Dissipation PDW W XFP Transceiver Electrical Pad Layout Host Board Connector Pad Layout EE 5 Mod_DeSel Interrupt TX_Dis CC 5 CC 3 CC 3 SCL SDA Mod_Abs Mod_NR RX_LOS Bottom of XFP Board (as viewed thru top of board) Toward Bezel TD+ 8 TD RefCLK- 4 RefCLK+ 3 CC 1 TP_Down/RS 0 CC RD+ 17 RD- 16 Top of XFP Board TD+ 5 EE TD- Mod_DeSel Interrupt TX_Dis RefCLK- cc5 RefCLK+ cc3 cc cc3 P_Down/RST SCL cc SDA Mod_Abs RD+ Mod_NR RD- RX_LOS Toward ASIC Oplink Communications, LLC 3

4 Module Pin Description Pin Logic Symbol Description 1 - Module Ground - EE 5 Optional -5. Power Supply (Not Required) 3 LTTL-I Mod_DeSel Module De-select; When held low allows module to respond to -wire serial interface 4 LTTL-O Interrupt Interrupt; Indicates presence of an important condition which can be read over the -wire serial Interface 5 LTTL-I TX_Dis Transmitter Disable; Turns off transmitter laser output 6 - CC 5 +5 Power Supply 7 - Module Ground 8 - CC Power Supply 9 - CC Power Supply 10 LTTL-I/O SCL -Wire Serial Interface Clock 11 LTTL-I/O SDA -Wire Serial Interface Data Line 1 LTTL-O Mod_Abs Indicates Module is not present. Grounded in the Module 13 LTTL-O Mod_NR Module Not Ready; Indicating Module Operational Fault 14 LTTL-O RX_LOS Receiver Loss Of Signal Indicator 15 - Module Ground 16 - Module Ground 17 CML-O RD- Receiver Inverted Data Output 18 CML-O RD+ Receiver Non-Inverted Data Output 19 - Module Ground 0 - CC Nor Used 1 LTTL-I P_Down/RST - CC Not Used 3 - Module Ground Power down; When high, requires the module to limit power consumption to 1.5W or below. -Wire serial interface must be functional in the low power mode. Reset; The falling edge initiates a complete reset of the module including the -wire serial interface, equivalent to a power cycle. 4 PECL-I RefCLK+ Clock Non-Inverted Input (Not Required) 5 PECL-I RefCLK- Clock Inverted Input (Not Required) 6 - Module Ground 7 - Module Ground 8 CML-I TD- Transmitter Inverted Data Input 9 CML-I TD+ Transmitter Non-Inverted Data Input 30 - Module Ground Oplink Communications, LLC 4

5 Host Board Termination & Coupling TD+ 50Ω line CML INPUTS TD- 50Ω line RD+ 50Ω line 1µH coil or ferrite inductor , XFP CML OUTPUTS RD- 50Ω line ASIC/ SerDes µH coil or ferrite inductor SCL, SDA, R +3.3 R Mod_Abs, Mod_NR, R Interrupt, RX_LOS R: 4.7 to 10kΩ All caps are in units of µf Application Notes Electrical Interface: All signal interfaces are compliant with the XFP MSA specification. The high speed DATA interface is differential AC-coupled internally and can be directly connected to a 3.3 SERDES IC. RX_LOS: The Loss of Signal circuit monitors the level of the incoming optical signal and generates a logic HIGH when an insufficient photocurrent is produced. TX_Dis: When the TX Disable pin is at logic HIGH, the transmitter optical output is disabled. (less than -45dBm). P_Down: The Power Down Function pin, when held High by the host, places the module in the standby (Low Power) mode with a maximum power dissipation of 1.5W. This protects hosts which are not capable of cooling higher power modules which may be accidentally inserted. The module s -wire serial interface and all laser safety functions must be fully functional in this low power mode. During P_Down, the module shall still support the completion of reset Interrupt, as well as maintain functionality of the variable power supply. Mod_NR: The Mod_NR is an output pin that when High, indicates that the module has detected a condition that renders transmitter and or receiver data invalid, shall consist of logical OR of the following signals: Transmit Signal Conditioner Loss of Lock Transmitter Laser Fault Receiver Signal Conditioner Loss of Lock Other conditions deemed valuable to the detection of fault may be added to the Mod_NR. The Mod_NR output pin is an open collector and must be pulled to Host_cc on the host board. P_Down/RST: The negative edge of Reset Function signal initiates a complete module reset. Module Behavior During P_Down and RST: During execution of a reset (t_init) or while held in Power Down mode, a module may be unable to determine the correct value for Mod_NR and RX_LOS. These outputs as well as all interrupt related flags, except completion of Reset flag, shall be disregarded by the host. When the module completes a Reset and is not in Power Down mode, the module must represent the correct value of both signals on its outputs before posting a completion of reset interrupt to the host. At no time shall a module cause spurious assertion of the Interrupt pin. When a host initially applies power to a module with the P_Down/RST signal asserted, a module comes up in power down mode. The module shall only assert the Interrupt signal pin to inform the host it has completed a reset. The completion of reset flag shall be the only interrupt source flag set during power down mode. The host is expected to clear this interrupt before releasing the module from the power down mode. The transition from power down mode to normal mode will trigger a reset of the module and result in a nd module reset and a nd reset completion interrupt to the host. Power Supply and Grounding: The power supply line should be well-filtered. All 0.1μF power supply bypass capacitors should be as close to the transceiver module as possible. Oplink Communications, LLC 5

6 Package Outline XR0.8MAX 6.9 ± MAX 6.1MIN 44.1 ±0.1 R0.3MAX XR1.0 ± ± ± X ± ±0.1 PCB THK ± ±0.1 PCB WIDTH 1.7 X ± DIMENSION IN MILLIMETERS NOTES: UNLESS OTHERWISE SPECIFIED Ordering Information Model Name TXD3XGGIC00061G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00060G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00059G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00058G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00057G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00056G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00055G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00054G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00053G - 5 C to +70 C Commercial Red 40km TXD3XGGIC0005G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00051G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00050G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00049G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00048G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00047G - 5 C to +70 C Commercial Red 40km Oplink Communications, LLC 6

7 Model Name TXD3XGGIx000xxG TXD3XGGIC00046G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00045G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00044G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00043G - 5 C to +70 C Commercial Red 40km TXD3XGGIC0004G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00041G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00040G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00039G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00038G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00037G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00036G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00035G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00034G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00033G - 5 C to +70 C Commercial Red 40km TXD3XGGIC0003G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00031G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00030G - 5 C to +70 C Commercial Red 40km TXD3XGGIC0009G - 5 C to +70 C Commercial Red 40km TXD3XGGIC0008G - 5 C to +70 C Commercial Red 40km TXD3XGGIC0007G - 5 C to +70 C Commercial Red 40km TXD3XGGIC0006G - 5 C to +70 C Commercial Red 40km TXD3XGGIC0005G - 5 C to +70 C Commercial Red 40km TXD3XGGIC0004G - 5 C to +70 C Commercial Red 40km TXD3XGGIC0003G - 5 C to +70 C Commercial Red 40km TXD3XGGIC000G - 5 C to +70 C Commercial Red 40km TXD3XGGIC0001G - 5 C to +70 C Commercial Red 40km TXD3XGGIC0000G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00019G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00018G - 5 C to +70 C Commercial Red 40km TXD3XGGIC00017G - 5 C to +70 C Commercial Red 40km Model Name TXD3XGGIE00061G - 5 C to +85 C Extended Red 40km TXD3XGGIE00060G - 5 C to +85 C Extended Red 40km TXD3XGGIE00059G - 5 C to +85 C Extended Red 40km TXD3XGGIE00058G - 5 C to +85 C Extended Red 40km TXD3XGGIE00057G - 5 C to +85 C Extended Red 40km TXD3XGGIE00056G - 5 C to +85 C Extended Red 40km TXD3XGGIE00055G - 5 C to +85 C Extended Red 40km TXD3XGGIE00054G - 5 C to +85 C Extended Red 40km TXD3XGGIE00053G - 5 C to +85 C Extended Red 40km TXD3XGGIE0005G - 5 C to +85 C Extended Red 40km Oplink Communications, LLC 7

8 Model Name TXD3XGGIx000xxG TXD3XGGIE00051G - 5 C to +85 C Extended Red 40km TXD3XGGIE00050G - 5 C to +85 C Extended Red 40km TXD3XGGIE00049G - 5 C to +85 C Extended Red 40km TXD3XGGIE00048G - 5 C to +85 C Extended Red 40km TXD3XGGIE00047G - 5 C to +85 C Extended Red 40km TXD3XGGIE00046G - 5 C to +85 C Extended Red 40km TXD3XGGIE00045G - 5 C to +85 C Extended Red 40km TXD3XGGIE00044G - 5 C to +85 C Extended Red 40km TXD3XGGIE00043G - 5 C to +85 C Extended Red 40km TXD3XGGIE0004G - 5 C to +85 C Extended Red 40km TXD3XGGIE00041G - 5 C to +85 C Extended Red 40km TXD3XGGIE00040G - 5 C to +85 C Extended Red 40km TXD3XGGIE00039G - 5 C to +85 C Extended Red 40km TXD3XGGIE00038G - 5 C to +85 C Extended Red 40km TXD3XGGIE00037G - 5 C to +85 C Extended Red 40km TXD3XGGIE00036G - 5 C to +85 C Extended Red 40km TXD3XGGIE00035G - 5 C to +85 C Extended Red 40km TXD3XGGIE00034G - 5 C to +85 C Extended Red 40km TXD3XGGIE00033G - 5 C to +85 C Extended Red 40km TXD3XGGIE0003G - 5 C to +85 C Extended Red 40km TXD3XGGIE00031G - 5 C to +85 C Extended Red 40km TXD3XGGIE00030G - 5 C to +85 C Extended Red 40km TXD3XGGIE0009G - 5 C to +85 C Extended Red 40km TXD3XGGIE0008G - 5 C to +85 C Extended Red 40km TXD3XGGIE0007G - 5 C to +85 C Extended Red 40km TXD3XGGIE0006G - 5 C to +85 C Extended Red 40km TXD3XGGIE0005G - 5 C to +85 C Extended Red 40km TXD3XGGIE0004G - 5 C to +85 C Extended Red 40km TXD3XGGIE0003G - 5 C to +85 C Extended Red 40km TXD3XGGIE000G - 5 C to +85 C Extended Red 40km TXD3XGGIE0001G - 5 C to +85 C Extended Red 40km TXD3XGGIE0000G - 5 C to +85 C Extended Red 40km TXD3XGGIE00019G - 5 C to +85 C Extended Red 40km TXD3XGGIE00018G - 5 C to +85 C Extended Red 40km TXD3XGGIE00017G - 5 C to +85 C Extended Red 40km Model Name TXD3XGGII00061G - 40 C to +85 C Industrial Red 40km TXD3XGGII00060G - 40 C to +85 C Industrial Red 40km TXD3XGGII00059G - 40 C to +85 C Industrial Red 40km TXD3XGGII00058G - 40 C to +85 C Industrial Red 40km TXD3XGGII00057G - 40 C to +85 C Industrial Red 40km Oplink Communications, LLC 8

9 Model Name TXD3XGGII00056G - 40 C to +85 C Industrial Red 40km TXD3XGGII00055G - 40 C to +85 C Industrial Red 40km TXD3XGGII00054G - 40 C to +85 C Industrial Red 40km TXD3XGGII00053G - 40 C to +85 C Industrial Red 40km TXD3XGGII0005G - 40 C to +85 C Industrial Red 40km TXD3XGGII00051G - 40 C to +85 C Industrial Red 40km TXD3XGGII00050G - 40 C to +85 C Industrial Red 40km TXD3XGGII00049G - 40 C to +85 C Industrial Red 40km TXD3XGGII00048G - 40 C to +85 C Industrial Red 40km TXD3XGGII00047G - 40 C to +85 C Industrial Red 40km TXD3XGGII00046G - 40 C to +85 C Industrial Red 40km TXD3XGGII00045G - 40 C to +85 C Industrial Red 40km Landing Pkwy Fremont, CA Tel: (510) Fax: (510) Sales@Oplink.com TXD3XGGII00044G - 40 C to +85 C Industrial Red 40km TXD3XGGII00043G - 40 C to +85 C Industrial Red 40km TXD3XGGII0004G - 40 C to +85 C Industrial Red 40km TXD3XGGII00041G - 40 C to +85 C Industrial Red 40km TXD3XGGII00040G - 40 C to +85 C Industrial Red 40km TXD3XGGII00039G - 40 C to +85 C Industrial Red 40km TXD3XGGII00038G - 40 C to +85 C Industrial Red 40km TXD3XGGII00037G - 40 C to +85 C Industrial Red 40km TXD3XGGII00036G - 40 C to +85 C Industrial Red 40km TXD3XGGII00035G - 40 C to +85 C Industrial Red 40km TXD3XGGII00034G - 40 C to +85 C Industrial Red 40km TXD3XGGII00033G - 40 C to +85 C Industrial Red 40km TXD3XGGII0003G - 40 C to +85 C Industrial Red 40km TXD3XGGII00031G - 40 C to +85 C Industrial Red 40km TXD3XGGII00030G - 40 C to +85 C Industrial Red 40km TXD3XGGII0009G - 40 C to +85 C Industrial Red 40km TXD3XGGII0008G - 40 C to +85 C Industrial Red 40km TXD3XGGII0007G - 40 C to +85 C Industrial Red 40km TXD3XGGII0006G - 40 C to +85 C Industrial Red 40km TXD3XGGII0005G - 40 C to +85 C Industrial Red 40km TXD3XGGII0004G - 40 C to +85 C Industrial Red 40km TXD3XGGII0003G - 40 C to +85 C Industrial Red 40km TXD3XGGII000G - 40 C to +85 C Industrial Red 40km TXD3XGGII0001G - 40 C to +85 C Industrial Red 40km TXD3XGGII0000G - 40 C to +85 C Industrial Red 40km TXD3XGGII00019G - 40 C to +85 C Industrial Red 40km TXD3XGGII00018G - 40 C to +85 C Industrial Red 40km TXD3XGGII00017G - 40 C to +85 C Industrial Red 40km Oplink Communications, LLC. reserves the right to make changes in equipment design or specifications without notice. Information supplied by Oplink Communications, LLC. is believed to be accurate and reliable. However, no responsibility is assumed by Oplink Communications, LLC. for its use nor for any infringements of third parties, which may result from its use. No license is granted by implication or otherwise under any patent right of Oplink Communications, LLC. 017, Oplink Communications, LLC. 9

10 A at 100 to 240 VAC. G3NE-220T-US (20 A at 75 to 264 VAC) 5 A at 100 to 240 VAC

10 A at 100 to 240 VAC. G3NE-220T-US (20 A at 75 to 264 VAC) 5 A at 100 to 240 VAC Solid State Relays G3NE Compact, Low-cost, SSR Switching 5to20 A Wide load voltage range: 75 to 264 VAC. Dedicated, compact aluminum PCB and power elements used. Built-in varistor effectively absorbs external