Electrical Specifications. Dimensions (inches)

Size: px
Start display at page:

Download "Electrical Specifications. Dimensions (inches)"

Transcription

1 Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power Supply Input mps max, Hz mps max, Hz pprovals FM & CS (CE approval pending) mbient Temperature -20 F to 122 F (-29 C to 50 C) 4-20 m I/O Control Relays Output: 350 Input: 20 Ohms max user load resistance m max current, 250 Ohm input resistance Input Coil: m m Output Contacts: mps, mps Dimensions (inches) Interface Panel Mounting Holes 4-Places 24 VDC Power Supply Size: 3.25 x 5.75 User Display Size: 5.5 x Burner Brain Size: x 10.0 Panel Depth: 4.25 Panel Weight 9 pounds 5/03

2 Page 7204 Dimensions (inches) Flow Controllers / Flow Bodies 6.25 Flow Controller Depth: 3.25 Flow Controller Weight: 3 pounds plus Flow Body Probe Length: for ir 6.75 for Gas Flow Body OD: (see table) Flow Body Length: (see table) S ize O.D. ir Flow Body Dimensions (Inches) Length No. of Pcs. Weight (lbs.) Type Flanges Weight Low Range Min Flow 1000' s Max Flow High Range Min Flow Max Flow Max High Range Pressure Drop ("wc) Rolled ngle* Rolled ngle* Rolled ngle* Rolled ngle* Rolled ngle* Rolled ngle* *Chicago Metal Rolled Products S ize O.D. (773) Gas Flow Body Dimensions (Inches) Length No. of Pcs. Weight (lbs.) HC *150 lb. rating Flanges Low Range Min Flow 1000' s Max Flow High Range Min Flow Max Flow Max High Range Pressure Drop ("wc) Type Weight 1 NSI* NSI* NSI* NSI* NSI* Oxygen (or ir) Stainless Flow Body Dimensions (Inches) S ize O.D. Length No. of Pcs. Weight (lbs.) *150 lb. rating Type NSI NSI NSI NSI Flanges Weight Low Range Min Flow 1000' s Max Flow High Range Min Flow Max Flow Max High Range Pressure Drop ("wc) 1 * * * *

3 Page 7205 Valve Body Specifications Valve Body Material Specifications - 1" thru 4" Item No. Description 1 Valve Body GP Flat Faced Gray STM 157 GR, G3000 Valve Body ssembly GP Raised Faced Carbon STM 216 GR, WCB 2 Valve Stem 303 Stainless - STM 157 GR, G Butterfly Disc 304 Stainless - STM 240 Type 304 UNS No. S Top Bushing 5 Bottom Bushing 6 Top Shim Bushing 7 O-Ring 8 O-Ring 9 O-Ring 10 Screw 11 Washer 12 Retaining Ring Bronze - STM B271, B505 and B584 Buna-N 18-8 Stainless 304 Stainless 316 Stainless UNS No. C93200 Oxy Flat Faced STM B62 UNS No. C83600 Viton 4/03

4 Page 7206 Valve Body Specifications Valve Body Material Specifications - 6" thru 16" Item No. Description Valve Size 6 " & 8" 10" - 16" 1 Valve Body Gray - STM 157 GR, G Valve Stem 316 Stainless - STM Butterfly Disc 304 Stainless - STM 167 UNS No. S T op & Bottom Bushing Bronze - STM B271, B505 and B Shim Bushing UNS No. C O-Ring 7 O-Ring 8 Screw 9 Hex Nut 10 Retaining Ring 11 Retaining Ring Buna-N Carbon - STM 108 UNS No. G Stainless Zinc Plated Carbon 316 Stainless Zinc Plated Carbon Carbon - SE UNS No. G10600-G Pipe Plug lloy - STM 322 UNS G40370

5 Page 7207 Valve Body Specifications SMRTFIRE Valve Body ssembly Material Specifications Item No. Description SMRTFIRE Component Material Specifications 1 Valve Body Sub-assembly ssembly per pages 7205 & Locating Spring Pin 3 dapter Bracket 4 Head Cap Screw 5 Coupling 6 Locking Collar 7 Spring Pin 8 Dowel Pin 9 Hard Stop Screw 10 Hard Stop Nut 11 Cover Plate - These items used only on sizes 1" thru 4" 11 4 Zinc Plated Carbon STM B179 T6 luminum Zinc Plated Carbon STM 582 Type 303 Stainless 18-8 Type 303 Stainless Zinc Plated Carbon 303 Stainless 18-8 Stainless Stainless luminum 4/03

6 Page 7208 Dimensions (in inches) 1" SMRTFIRE Valve ctuator 1.25" SMRTFIRE Valve ctuator dia. 4.2 dia. 3.1 dia. 1.1 dia dia..62 dia. 3.5 dia. 5.0 dia " 1" Flange Dimension "" Welded Solder Cup 3.51 Flange Dimension "" Welded 5 5 Solder Cup 3.63

7 Page 7209 Dimensions (inches) 1.5" SMRTFIRE Valve ctuator 2" SMRTFIRE Valve ctuator dia..75 dia dia. 5.0 dia. 3.9 dia dia. 4.8 dia. 2.2 dia " 1" " Flange Dimension "" Welded Solder Cup 3.88 Flange Dimension "" Welded Solder Cup /03

8 Page 7210 Dimensions (in inches) 2.5" SMRTFIRE Valve ctuator 3" SMRTFIRE Valve ctuator dia..75 dia dia. 2.6 dia dia. 3.3 dia dia dia Flange Dimension "" Welded Solder Cup 5.27 Flange Dimension "" Welded 3 2 Solder Cup 5.09

9 Page 7211 Dimensions (in inches) 4" SMRTFIRE Valve ctuator 6" SMRTFIRE Valve ctuator dia dia. 7.5 dia dia. 6.1 dia. 1/2-13 UNC 6 holes 7.75" dia dia. 8 holes deep Flange Dimension "" Welded 6 4/03

10 Page 7212 Dimensions (in inches) 8" SMRTFIRE Valve ctuator 10" SMRTFIRE Valve ctuator /2-13 UNC 6 holes 8.0 dia. 5 dia dia dia dia dia dia. dia deep deep 8.4 Note: Flanges are shipped loose.

11 Page 7213 Dimensions (in inches) 12" SMRTFIRE Valve ctuator 14" SMRTFIRE Valve ctuator dia dia dia dia dia. 1 dia. dia dia dia. 1.1 dia deep deep 10.5 Note: Flanges are shipped loose. Note: Flanges are shipped loose. 6/03

12 Page 7214 Dimensions (in inches) 16" SMRTFIRE Valve ctuator 23.5 dia dia dia dia dia. 16 holes deep 11.4 Note: Flanges are shipped loose.

Electrical Specifications. Dimensions (inches)

Electrical Specifications. Dimensions (inches) Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power

More information

Hardware Solutions Contents

Hardware Solutions Contents Hardware Solutions Contents Front Retainers MS14108 Type Ruggedized Self-locking Front Retainers 21716 Ruggedized Self-locking Front Retainer 21953 Ruggedized Self-locking Front Retainer SLR1 Self-locking

More information

Southco 64 Push-to-Close Latch Visible, Locking, Slide Bolt

Southco 64 Push-to-Close Latch Visible, Locking, Slide Bolt Southco 64 Push-to-Close Latch, Locking, Slide olt 139.7 (5.50) 10.2 (.40) 108 (4.25) 4X Ø H RIVET LTCHES ONLY 22.6 (.89) Push-to-Close Latches 1.2 (.05) 45.1 (1.78) NON-LOCKING LOCKING* 23.4 (.92) TYPE

More information

Section B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1

Section B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1 Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe

More information

AOP B Series Floating Ball Valves. Delivering dependability at an affordable price into upstream, general purpose valve applications

AOP B Series Floating Ball Valves. Delivering dependability at an affordable price into upstream, general purpose valve applications AOP B Series Floating Ball Valves Delivering dependability at an affordable price into upstream, general purpose valve applications AOP Series BUL Floating Ball Valves FEATURES AND BENEFITS One-piece carbon

More information

Parts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns:

Parts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns: 7-1 Section 7 Using the Illustrated List The parts lists provided in this section are organized into the following columns: Item Identifies illustrated parts that are available from Nordson Corporation.

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS C24DA/GA-SERIES STEAMERS C24GA6 C24GA10 C24DA6 C24DA10 ML-138085 ML-138088 ML-152022 ML-152023 VULCAN-HART DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC 3600 NORTH POINT BLVD.,

More information

Spare parts list PVX open loop CW

Spare parts list PVX open loop CW Spare parts list PVX-066... 250 open loop CW Directory 1 Spare parts (general) 3 2 Basic pump 2.1 Basic pump explosion view 4 2.2 Basic pump rotating group 1 5 2.3 Basic pump rotating group 2 6 2.4 Basic

More information

Parts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns:

Parts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns: 7-1 Section 7 Using the Illustrated List The parts lists provided in this section are organized into the following columns: Item Identifies illustrated parts that are available from Nordson Corporation.

More information

The Shand & Jurs Model Pressure Relief Vent

The Shand & Jurs Model Pressure Relief Vent PRODUCT DATA SHEET Designed for high efficiency & economy Provides maximum flow capacity Reduces maintenance and replacement costs Suitable for corrosive and toxic applications Standard flange base for

More information

DUPLEX STRAINERS BULLETIN NO KECKLEY COMPANY 3400 Cleveland Street P.O. Box 67 Skokie, Illinois 60076

DUPLEX STRAINERS BULLETIN NO KECKLEY COMPANY 3400 Cleveland Street P.O. Box 67 Skokie, Illinois 60076 Distributed By: M&M Control Service, Inc. www.mmcontrol.com/keckley.php 800-876-006 847-6-066 BULLETIN NO. 9400- DUPLEX STRAINERS Shown with Optional Differential Pressure Indicator KECKLEY COMPANY 400

More information

JBL VT4882. Technical Manual SPECIFICATIONS JBL VT4882 REV S

JBL VT4882. Technical Manual SPECIFICATIONS JBL VT4882 REV S Technical Manual JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A. SPECIFICATIONS ACOUSTIC & ELECTRICAL SPECIFICATIONS: Nominal Impedance: 8 ohms, each transducer

More information

DUPLEX STRAINERS 800-KECKLEY ( ) BULLETIN NO / FAX: 847/ WEB SITE:

DUPLEX STRAINERS 800-KECKLEY ( ) BULLETIN NO / FAX: 847/ WEB SITE: BULLETIN NO. 9400- DUPLEX STRAINERS 800-KECKLEY (800-2-9) 847/674-8422 FAX: 847/674-206 E-MAIL: SALES@KECKLEY.COM WEB SITE: WWW.KECKLEY.COM NO QUESTION. WE HAVE THE ANSWERS. Shown with Optional Differential

More information

2M804 Push-Pull Crimp Receptacles Ordering Guide for 2M , 002, 003, 004

2M804 Push-Pull Crimp Receptacles Ordering Guide for 2M , 002, 003, 004 Push-Pull Crimp Receptacles Ordering Guide for -001, 002, 003, 004 Micro38999 1. 2. 3. 4. 5. 6. 7. SERIES SHELL SERVICE SHELL SIZE-INSERT CONTACTS KEYING SUFFIX STYLE CLASS ARANGEMENT -00X -06 ZNU 6-7

More information

2-3-5 Valve Manifolds

2-3-5 Valve Manifolds 2-3-5 Valve Manifolds range of Valve Manifolds offer a safe and economical method of installation to control and measure pressure of liquids and gaseous media. They are ruggedly manufactured and precision

More information

Parts Catalog. S-Series Slicer Manual S13. Model:

Parts Catalog. S-Series Slicer Manual S13. Model: , 08 99506 ECN 035 Parts Catalog S-Series Slicer Manual Model: S3 S3 /3/08 Rev. M IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE FOOD

More information

3/8 BORE MOUNTING BRACKETS

3/8 BORE MOUNTING BRACKETS 3/8 BORE MOUNTING BRACKETS 11767 Ceramic Insulator Use with cylinder having #8-32 threaded shaft to insulate cylinder from heat or electricity #8-32 thd. - thru dia. Male Clevis 11996 Mounts in rear of

More information

Weld-on Nut. Protection Ring SW41 M27 23 FWZ Steel. Dia. A. Dia. B R10. Part-No.

Weld-on Nut. Protection Ring SW41 M27 23 FWZ Steel. Dia. A. Dia. B R10. Part-No. 8.11 Accessory parts Table of Contents Protection parts for lubrication points Weld-on nut 8.11.2 Protection ring 8.11.2 Protector for lubrication points 8.11.3 Weld-on piece for lubrication points 8.11.3

More information

PARTS LIST CHARGER 2022 ABLT

PARTS LIST CHARGER 2022 ABLT PARTS LIST CHARGER 2022 ABLT HEAD ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 5990731 SPRING CLIP PAD HOLDER SET INCLUDES: 1 101A 9120205 #8 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW PACK OF 3 3 102 9121490

More information

get connected with Bradford fittings & valves Bradford Company, Inc

get connected with Bradford fittings & valves Bradford Company, Inc get connected with Bradford fittings & valves Bradford Company, Inc. 800.789.1718 www.bradfordfittings.com Bradford your top quality, sanitary stainless steel fittings & valves manufacturer serving you

More information

Dual Modular Safety Shutoff Valves with Proof of Closure Option. DMV eco Series DMV-D eco Series DMV-DLE eco Series

Dual Modular Safety Shutoff Valves with Proof of Closure Option. DMV eco Series DMV-D eco Series DMV-DLE eco Series Dual Modular Safety Shutoff Valves with Proof of Closure Option DMV eco Series DMV-D eco Series DMV-DLE eco Series Two normally closed safety shutoff valves in one housing; each with the following approvals.

More information

A A A T E C H N O L O G Y

A A A T E C H N O L O G Y A A A T E C H N O L O G Y & SPECIALTIES CO., INC. H A R D W A R E C A T A L O G TOTAL SOLUTION SERVICE For the Industrial Piping Marketplace 2011 www.aaatech.com 4 0 Y E A R S S E R V I N G I N D U S T

More information

D Series / Screwed Bonnet Screwed End - Full Opening Ductile Iron Swing Checks

D Series / Screwed Bonnet Screwed End - Full Opening Ductile Iron Swing Checks 5.2016.15.k 1 Swing Check Valves D Series / Screwed onnet Screwed End - Full Opening Ductile Iron Swing Checks C C Threaded Swing Checks Pressure 1 2 3 4 300# D300-1 D300-2 D300-3 D300-4 600# D600-1 D600-2

More information

TECHNICAL BROCHURE BPRIMELINE R1. Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS TECHNICAL DATA

TECHNICAL BROCHURE BPRIMELINE R1. Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS TECHNICAL DATA TECHNICAL BROCHURE BPRIMELINE R1 Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS TECHNICAL DATA Prime Line A Full Range of Product Features Rugged Construction: Cast iron construction in close

More information

4567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123

More information

style vision & quarter turns quarter turns section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS

style vision & quarter turns quarter turns section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS quarter turns vision & style quarter turns INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 3 quarter turns No. 626-PK Patent Pending

More information

PARTS BOOK FLAIL HEADS 90 REAR 3PT HITCH MOUNT

PARTS BOOK FLAIL HEADS 90 REAR 3PT HITCH MOUNT PARTS BOOK FLAIL HEADS 90 REAR 3PT HITCH MOUNT 5.0.8 DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 5704 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS WILL DIAGNOSE YOUR

More information

Pallet Feet & Fittings SQUARE

Pallet Feet & Fittings SQUARE SQUARE 1410 Thickness: 2.3 Weight (Kg/100): 25 Post size(mm): 40 per ft (Tonne): 2.46 PALLET FOOT 89MM SQUARE X 2.3 mm THICK 0138 Thickness: 2.3 Weight (Kg/100): 50 per ft (Tonne): 2.19 PALLET FOOT 127MM

More information

SIZE RANGE: 1 TO 10. PRESSURE RANGE: FULL VACUUM TO 275 psi

SIZE RANGE: 1 TO 10. PRESSURE RANGE: FULL VACUUM TO 275 psi 2 3 4 5 HANDLE OPTION ITEM DESCRIPTION STANDARD MATERIAL 1 Wrench - Locking Durcor -62 2 Hex Head Cap Screw 316 Stainless Steel 3 Washer 18-8 Stainless Steel 4 Wrench Stop Plate - Locking 304 Stainless

More information

Section B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1

Section B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1 Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe

More information

COLGED. Isytech

COLGED. Isytech COLGED SPARE PARTS CATALOGUE ERSATZTEILKATALOG CATALOGUE PIECES DETACHEES CATALOGO PARTI RICAMBIO CATALOGO DE PIEZAS DE RECAMBIO CATALOGO PECAS, DE REPOSICAO Isytech -0. --0 9 0 R L 8 4 8 0 L R 4 MOD T0

More information

PARTS LIST COLT COLT HEPA

PARTS LIST COLT COLT HEPA PARTS LIST COLT 800-1250 - 1450 COLT HEPA - 1250-1450 MOTOR / LID ITEM PART NO. PART DESCRIPTION QTY. 101 0891201 TOP COVER 1 102 0294341 TOP MOTOR SEAL 1 103 0299861 STRAIN RELIEF CORD CLAMP 1 104 0891131

More information

Tuf-Lite II Fans 8000 Series Hub

Tuf-Lite II Fans 8000 Series Hub Tuf-Lite II Fans 8000 Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 34 through 40 Diameter Hudson Tuf-Lite II (white, prev. blue**) fan blades are made from

More information

LOAD BINDER WINCHES AUTO TENSIONER (AIR WINCH) PART NO 30/303899

LOAD BINDER WINCHES AUTO TENSIONER (AIR WINCH) PART NO 30/303899 LOAD BINDER WINCHES AUTO TENSIONER (AIR WINCH) PART NO 30/303899 NORMAL OPERATION 1. Release locking pawls (2 of). 2. This allows drum to run free and strap can be pulled off drum. 3. Throw over load,

More information

CONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9

CONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9 CONTENTS PAGE NUMBER Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5 Hoist Rings Center Pull 6 Side Pull 7 Socket Head Stripper Bolts Inch 8 Metric 9 Punch Holder Shanks 10 Roller Stock Guides 11

More information

SERVICE SHEET 34" WALK-BEHIND POWER TROWEL MODEL FT34 (THIS SERVICE SHEET APPLIES TO THE TROWELS WITH SERIAL NUMBER AND AFTER) WARNING

SERVICE SHEET 34 WALK-BEHIND POWER TROWEL MODEL FT34 (THIS SERVICE SHEET APPLIES TO THE TROWELS WITH SERIAL NUMBER AND AFTER) WARNING 34" WALK-BEHIND POWER TROWEL (THIS APPLIES TO THE TROWELS WITH SERIAL NUMBER 0837 AND AFTER) WARNING To reduce the risk of injury, all operators and maintenance personnel must read and understand these

More information

PARTS LIST EXTRACTOR ACCESSORIES

PARTS LIST EXTRACTOR ACCESSORIES PARTS LIST EXTRACTOR ACCESSORIES 3 - JET WAND - 4097101 101 4097961 HANDLE ASSEMBLY - INCLUDES: 1 102 9121210 1/4-20 X 5/8 HEX BOLT 2 103 ---------- HANDLE CLAMP 1 104 9120920 1/4-20 HEX NUT 2 105 9120777

More information

W & A PARTS MANUAL LEVEE PLOW STANDARD. Model No Blade Model No Blade (Parts Only)

W & A PARTS MANUAL LEVEE PLOW STANDARD. Model No Blade Model No Blade (Parts Only) W & A PARTS MANUAL LEVEE PLOW STANDARD Model No. 824 -- 8 Blade Model No. 836 -- 10 Blade (Parts Only) SPECIALIZED FARM EQUIPMENT Quality Products from W & A MANUFACTURING COMPANY P.O. Box 5238, Pine Bluff,

More information

Thermostatic Griddle Field Service Kit Instructions

Thermostatic Griddle Field Service Kit Instructions Thermostatic Griddle Field Service Kit Instructions The following document provides instructions on how to install a Garland Thermostatic Griddle Field Kit and is applicable to each 2 section of a Garland

More information

Tidland Series 'C' Knifeholder MAINTENANCE MANUAL Crush Cartridge Class I, II, III Crush Slitting

Tidland Series 'C' Knifeholder MAINTENANCE MANUAL Crush Cartridge Class I, II, III Crush Slitting Tidland Series 'C' Knifeholder MAINTENANCE MANUAL Crush Cartridge Class I, II, III Crush Slitting Please read and understand all the instructions before you start to maintain the Tidland Series 'C' Knifeholder.

More information

YORKSHIRE 48 OR 52 CARTON 1 CARTON 2 CARTON 3. Description Part No BLUE LAGOON WALL 12 BLUE LAGOON WALL

YORKSHIRE 48 OR 52 CARTON 1 CARTON 2 CARTON 3. Description Part No BLUE LAGOON WALL 12 BLUE LAGOON WALL CARTON 1 CARTON 2 CARTON 3 YORKSHIRE Part # 420860 ROUND PACKING LIST Description Part No. 8 21 24 27 30 33 8 BLUE LAGOON WALL 48 1492 52 1327 1 - - - - - - - - BLUE LAGOON WALL 48 1493 52 1328-1 - - -

More information

Integrated Process Solutions

Integrated Process Solutions Integrated Process Solutions w w w. m k s i n s t. c o m Series 31 ISO-KF fittings Sizes to 0 ( to 4'') Series 31 is a line of ISO-KF standard vacuum components. The ISO-KF system refers to the family

More information

XPO. Ultra low NOx indirect burner

XPO. Ultra low NOx indirect burner XPO Ultra low NOx indirect burner Low temperature burners - XPO burner -.- Low temperature burner for use with clean fuel gases Single digit NOx emissions at 0% High efficiency with low requirements Capacities

More information

Straight Gas Ball Valve, FIP x FIP

Straight Gas Ball Valve, FIP x FIP Series 0190200 Straight Gas all Valve, FIP x FIP S 3-88 5 psig, Z21.15a 1/2 psig SME 16.33 1 2 3 4 5 6 1 Nut Forged Steel STM-ISI-1010 2 Handle luminium, Red Enamel 3 Washer PTFE 4 O-Ring NR 5 Stem Forged

More information

Assembly TOOLS REQUIRED: 17mm and 14mm or equivalent wrenches.

Assembly TOOLS REQUIRED: 17mm and 14mm or equivalent wrenches. Instructions for 3 Trimmer Rack, 3TR* *Patents Pending Assembly TOOLS REQUIRED: 17mm and mm or equivalent wrenches. 15 26 26 16 15 16 Attach the lower mounting brackets to the Trimmer Rack poles as shown

More information

Data Sheet for Precision Potentiometer

Data Sheet for Precision Potentiometer AL(R)17/19 soldering lugs The AL(R)17/19 potentiometers in 22 mm housing are suitable for applications where a precise and economical multiturn potentiometer is important. Economical and precise multiturn

More information

DISCONTINUED PRODUCTS FREEDOM SERIES PATIO ILLUSTRATED PARTS LIST (SERIES CODE TW)

DISCONTINUED PRODUCTS FREEDOM SERIES PATIO ILLUSTRATED PARTS LIST (SERIES CODE TW) RETRACT CAREFREE OF COLORADO FREEDOM SERIES PATIO ILLUSTRATED PARTS LIST (SERIES CODE TW) - MANUFACTURED PRIOR TO 2-0 0 2 23 20 25 2 22 2 2 2 2 (Manual Crank Assembly) FIII503 CAREFREE OF COLORADO R03-00

More information

TC42 CHALET II BURNER KIT INSTALLATION INSTRUCTIONS

TC42 CHALET II BURNER KIT INSTALLATION INSTRUCTIONS INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this manual for future reference. These instructions are supplementary to the Installation and Operating Instructions supplied with the

More information

Amphenol RF Interconnects TNC 31 Series Threaded Lock RF Connector System Materials

Amphenol RF Interconnects TNC 31 Series Threaded Lock RF Connector System Materials TNC 31 Series Threaded Lock RF Connector System Materials Body/Finish Contacts Centre MALE Centre FEMALE Insulator Gasket Crimp Ferrules* *Metal finishes Durability Brass/Nickel Brass/Gold Plated (Au)

More information

Strut Clamp Pipe & Conduit

Strut Clamp Pipe & Conduit PRODUCT SPECIFICATIONS 0F Strut Clamp Pipe & Conduit Size: Steel pipe sizes 2" through 0" Finish: Electro-Galvanized Pipe clamps are designed to fit into the opening of 5 /8" wide channel profiles Pre-Assembled

More information

PARTS LIST eforce Burnisher

PARTS LIST eforce Burnisher PARTS LIST eforce Burnisher HEAD ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 6496721 MOTOR 36 VOLT, 2100 RPM, 3.6HP [see pages 16,17] 1 102 9121410 5/16 EXTERNAL STAR LOCK WASHER PACK OF 10 2 103 6492051

More information

PN 3000 Series Fail Closed Pneumatic Actuators

PN 3000 Series Fail Closed Pneumatic Actuators PN 3000 Series Fail Closed Pneumatic Description A of compact linear actuators having 5 diaphragm sizes for matching the requirements of 1/2" to 4" Spira-Trol valves at various differential pressures.

More information

MORIN B AND C SERIES ACTUATORS

MORIN B AND C SERIES ACTUATORS MORIN B AND C SERIES ACTUATORS B series - Ductile iron w/ stainless steel cylinders, C series - Ductile iron w/ carbon steel cylinders Spring return and double acting actuators Quarter-turn output torques

More information

Data Sheet for Precision Potentiometer

Data Sheet for Precision Potentiometer The ALI(R)17/19 potentiometers in mm housing are suitable for applications where a precise multiturn potentiometer increased radial shaft loads is important. ALI(R)17/19 reinforced bearing ALI(R)17/19

More information

Tank. Part B, Section 1. This section covers the following unit configurations. Pump Piston Pump (E or G)

Tank. Part B, Section 1. This section covers the following unit configurations. Pump Piston Pump (E or G) Part B, ection Model Voltage This section covers the following unit configurations. 3400V All Pump Piston Pump (E or G) Manifold Control 4-Port (A) Vista tandard (V) Vista Pattern (PC) Vista Temperature

More information

* * 4023 KR. Step 1 Prepare the Keyed Removable Unit. Not for use on electric or fire rated removable mullions

* * 4023 KR. Step 1 Prepare the Keyed Removable Unit. Not for use on electric or fire rated removable mullions condition. *64009-00* 64009-00 Keyed Removable Mullions 403 KR Installation Instructions Not for use on electric or fire rated removable mullions This kit includes the following parts: (Not to scale) 5/6

More information

B Bedpan Washer Assembly. T&S Brass and Bronze Works, Inc. Travelers Rest, South Carolina

B Bedpan Washer Assembly. T&S Brass and Bronze Works, Inc. Travelers Rest, South Carolina B-0676 Bedpan Washer Assembly 1 Asm, Vacuum Breaker B-0929 2 Elbow, Cast Round, 3/8" 001355-40 3 Vacuum Breaker B-0968 4 Nipple 000355-40 5 Nipple 002535-25 6 Asm, Faucet Flange 009523-40 7 Outlet, Wall

More information

Parts Catalog. Slicing Machine G10. Model:

Parts Catalog. Slicing Machine G10. Model: , 07 995079 ECN 96 Parts Catalog Slicing Machine G0 Model: G0 /8/7N Rev. E, Serial Number 4048 and Up IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER

More information

HANDWHEELS.

HANDWHEELS. HANDWHEELS 5 Handwheels Aluminum Angular Solid Handwheel...5.2 Aluminum Angular Spoked Handwheel... 5.2 Aluminum Finger Wheel... 5.10 Cast Angular Spoked Handwheel... 5.3 Cast Iron Angular Spoked Handwheel...

More information

Tarp Return. Questions? Contact Customer Or Parts Diagrams see Parts and Diagrams section on web at

Tarp Return. Questions? Contact Customer Or Parts Diagrams see Parts and Diagrams section on web at Roll Rite, LLC and its entire staff would like to not only Thank You but congratulate you on your purchase of one of what we feel to be the finest line of tarping systems in the industry. Tarp Return RR

More information

INSTALLATION & MAINTENANCE MANUAL SERIES 9000 MODELS 9150/9300 SERIES 9000 VALVES WITH V BALL

INSTALLATION & MAINTENANCE MANUAL SERIES 9000 MODELS 9150/9300 SERIES 9000 VALVES WITH V BALL BRIEF INTRODUCTION Split body (2-piece) valve allows easy replacement of gasket, seal, and seats without special tools. Series 90D ball valves use floating ball design. Induced by the line pressure the

More information

Specifications of "NP" & "RG" AIRFLO burners NP-I & NP-II AIRFLO burners

Specifications of NP & RG AIRFLO burners NP-I & NP-II AIRFLO burners Duct burners - NP & RG IRFLO burner 4-.5-7 Specifications of "NP" & "RG" IRFLO burners NP-I & NP-II IRFLO burners Differential gas pressure at burner inlet For burner capacity = 0.5 Mtu/h/ft Fuel NP-I

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS KR54, KR1654, & KR4954 Keyed Removable Mullion NOT FOR USE ON ELECTRIC OR FIRE RATED MULLIONS. This kit includes the following parts: (Not to scale) WARNING Remove key, reinstall,

More information

HMA 2 & HMA 2A. Installation and Service Instructions. Direct-Fired Gas Burners. The Blue Flame Series. Features and Benefits

HMA 2 & HMA 2A. Installation and Service Instructions. Direct-Fired Gas Burners. The Blue Flame Series. Features and Benefits REGISTERED Installation and Service Instructions COMPANY MADE in the USA The Blue Flame Series DIRECT FIRED MAKE-UP AIR BURNERS are used in industrial and commercial applications to maintain the desired

More information

TOOLING COMPONENTS. tel fax Clamping Kits Step Blocks...7. Driver Studs...

TOOLING COMPONENTS.  tel fax Clamping Kits Step Blocks...7. Driver Studs... Clamping Kits... 2-8 Step Blocks...7 Driver Studs... 9-13 Bolts, Screws... 14-20 Nuts, Washers... 21-29 Sex Bolts... 30-31 Clamps... 32-44 Screws... 45-49 Knobs & Levers... 49-53 Rest Pads...54 Index Plungers...

More information

Steel Flareless Ermeto Connectors

Steel Flareless Ermeto Connectors Ermeto onnectors PPITIO T Typical pplication: Hydraulic, instrumentation and chemical processing. Highly recommended for high pressure and high vibration applications. Tube O.. 1/8 3/16 1/4 5/16 3/8 1/2

More information

TC36 CHALET II BURNER KIT INSTALLATION INSTRUCTIONS

TC36 CHALET II BURNER KIT INSTALLATION INSTRUCTIONS INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this manual for future reference. These instructions are supplementary to the Installation and Operating Instructions supplied with the

More information

General Purpose High Power PCB Relays

General Purpose High Power PCB Relays T9 Series Two-pole 3A PCB or Panel Mount Relay n A, form A (NO) and form C (CO) switching capability n Designed to control compressor loads to 3.5 tons, LRA / 5.3FLA n Meets requirements of UL 58 and UL

More information

3/8 X 1-7/8 Washer /8-16 Serrated Flange Nut

3/8 X 1-7/8 Washer /8-16 Serrated Flange Nut Mystic II Round Part # 420916-10 Round Packing List ITEM DESCRIPTION PART # 8 21 24 27 30 33 Carton # 1 Carton # 2 Carton # 3 8 x52 Gray Forest 1742 1 - - - - - - - - x52 Gray Forest 1743-1 - - - - - -

More information

Smallest Connector with Removable Contacts

Smallest Connector with Removable Contacts 1 Ultra-Miniature 8STA Size 01 Connectors Smallest Connector with Removable Contacts Ultra compact design and very lightweight connector dedicated to the harshest of motorsport environments. Innovative

More information

SteadiCam Parts List*

SteadiCam Parts List* SteadiCam Parts List* A. 1 Bogen 3232 Monopod Swivel Tilt Head B. 1 1/2 internal to 1/2 external brass bushing flare adapter (part 9402249 at osh.com¹) C. 2 3/8 internal to 1/2 external brass bushing flare

More information

Mystic II Round. 3/8 X 1-7/8 Washer /8-16 Serrated Flange Nut

Mystic II Round. 3/8 X 1-7/8 Washer /8-16 Serrated Flange Nut Mystic II Round Part # 420916-10 Round Packing List ITEM DESCRIPTION PART # 8 21 24 27 30 33 Carton # 1 Carton # 2 Carton # 3 8 x52 Gray Forest 1742 1 - - - - - - - - x52 Gray Forest 1743-1 - - - - - -

More information

PARTS BOOK CATALOG SIDE HD FLAIL HEADS TRACTOR MID-MOUNT

PARTS BOOK CATALOG SIDE HD FLAIL HEADS TRACTOR MID-MOUNT PARTS BOOK CATALOG SIDE HD FLAIL HEADS TRACTOR MID-MOUNT DIAMOND MOWERS, Inc. 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS WILL DIAGNOSE

More information

PRODOTTI STANDARD PRODOTTI STANDARD

PRODOTTI STANDARD PRODOTTI STANDARD PRODOTTI STANDARD PRODOTTI STANDARD. Nuovi Prodotti... Pagg. 2-6 2. Cuscinetti antifrizione... Pagg. 7-0 3. Gabbie per cuscinetti a sfera... Pagg. - 3 4. Clips per aste filettate... Pag. 4 5. Accessori

More information

Section N Micro-D Uni-Saver, Hardware and Accessories

Section N Micro-D Uni-Saver, Hardware and Accessories Section Micro-D Uni-Saver, Hardware and ccessories Micro-D ccessories product selection guide Micro-D Uni-Saver lways in stock,these feed-thru pin-socket adapters feature an innovative design using a single

More information

2M801 Dual-Start ACME Threads

2M801 Dual-Start ACME Threads Dual-Start ACME Threads Ordering Guide for 1. 2. 3. 4. 5. 6. SERIES SHELL STYLE SERVICE CLASS SHELL SIZE-INSERT AGGMT CONTACTS KEYING -007-01 C 5-3 P A 1. SERIES Type Part # Description PLUG CRIMP PCB

More information

Lockable Fasport. IFP-600 Dimensions Overall Height 9.5" Overall Width 10" Opening Dia. 6.5" Weight 9 lbs. Model

Lockable Fasport. IFP-600 Dimensions Overall Height 9.5 Overall Width 10 Opening Dia. 6.5 Weight 9 lbs. Model Lockable Fasport IFP-600 Overall Height 9.5" Overall Width 10" Opening Dia. 6.5" Weight 9 lbs Note: Specify glass thickness when ordering. Die cast body and lid. A12 Aluminum body and ASSA deadbolt. Steel

More information

TC30 HEARTWOOD BURNER INSTALLATION INSTRUCTIONS

TC30 HEARTWOOD BURNER INSTALLATION INSTRUCTIONS INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this manual for future reference. These instructions are supplementary to the Installation and Operating Instructions supplied with the

More information

An Improved Pedestal To A Version One Worksurface

An Improved Pedestal To A Version One Worksurface Steelcase, Inc. Grand Rapids, MI 49501 U.S.A. 1-888-783-3522 An Improved Pedestal To A Version One Worksurface NOTE: This installation applies to 25, 30, and 35 deep worksurfaces with lock rail only. VERSION

More information

Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub

Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 32.8 or 10 Meter Diameter Hudson Tuf-Lite and Tuf-Lite II fan blades Hudson Tuf-Lite (black) fan blades

More information

Specifications of "NP" & "RG" AIRFLO burners NP-I & NP-II AIRFLO burners

Specifications of NP & RG AIRFLO burners NP-I & NP-II AIRFLO burners uct burners - "NP" & "RG" IRFLO 4-1.5-7 -i-11/07 Specifications of "NP" & "RG" IRFLO burners NP-I & NP-II IRFLO burners ifferential gas pressure at burner inlet For burner capacity =0.5 Mtu/h/ft Fuel NP-I

More information

TC36 SEE-THRU LODGEWOOD BURNER AND PANEL KIT INSTRUCTIONS

TC36 SEE-THRU LODGEWOOD BURNER AND PANEL KIT INSTRUCTIONS IMPORTANT: THESE INSTRUCTIONS ARE TO REMAIN WITH THE HOMEOWNER These instructions are supplementary to the Installation and Operating Instructions supplied with the fi replace and should be kept together.

More information

TCWS54 SEE THRU DIAMOND BURNER INSTALLATION KIT INSTRUCTIONS

TCWS54 SEE THRU DIAMOND BURNER INSTALLATION KIT INSTRUCTIONS INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this manual for future reference. These instructions are supplementary to the Installation and Operating Instructions supplied with the

More information

KAWNEER 1786 RIM EXIT DEVICE

KAWNEER 1786 RIM EXIT DEVICE FEBRUARY, 2015 1 DOOR STILE Device C L 40" 41-9/32" Cylinder C L Bottom of door RIM EXIT DEVICE LOCATION DOGGING KEY EXIT DEVICE FILLER PLATE CYLINDER & CYLINDER RING HOUSING COVER CYLINDER INSTALLATION

More information

SECTION I-1. Type: 1812-AC. Fuel: Air-Gas.

SECTION I-1. Type: 1812-AC. Fuel: Air-Gas. RADIANT LINE BURNER. SECTION I-1. Type: 1812-AC. Manufactured from a heat resisting cast alloy with a ceramic front face, this radiant burner type is ideally suited for use in Infrared Heating production

More information

WORKHOLDING COMPONENTS

WORKHOLDING COMPONENTS Adjustable Clamp Heels... 274 Adjustable Clamp Rests...273 Adjustable Step Blocks...284 Assemblies, Spherical Flange...260 Bolts, Dovetail...258 Bolts, Swing... 241 Bolts, T...258 Bolts, T-Slot...257 Bolts,

More information

MODELS: 440 SM & 440 SMSS

MODELS: 440 SM & 440 SMSS Most Dependable Fountains, Inc. OPERATIONS MANUAL MODELS: 440 SM & 440 SMSS Most Dependable Fountains, Inc 5705 Commander Drive Arlington, TN 38002 800-552-6331 FOUNTAINS, MOST DEPENDABLE FOUNTAINS, INC.

More information

BR-2250/BR Burnisher. Operator and Parts Manual. Model No.: BR BR-2250 Can. Pac BR BR-2500 Can.

BR-2250/BR Burnisher. Operator and Parts Manual. Model No.: BR BR-2250 Can. Pac BR BR-2500 Can. BR-220/BR-200 Burnisher Model No.: 608342 BR-220 609248 BR-220 Can. Pac 608340 BR-200 609247 BR-200 Can. Pac Operator and Parts Manual NOBLES 1287 RANSOM STREET HOLLAND MI 49424 U.S.A. CUSTOMER SERVICE:

More information

WRANGLER 1710AB, 2010AB

WRANGLER 1710AB, 2010AB WRANGLER 1710AB, 2010AB WIRING DIAGRAM ITEM PART NO. DESCRIPTION QTY 1 1393251 WIRE ASSEMBLY - CIRCUIT BREAKER TO BRUSH SWITCH 1 2 1393261 WIRE ASSEMBLY - CIRCUIT BREAKER TO VACUUM SWITCH 1 3 1393271 WIRE

More information

Oxford Round. Carton # 1. Carton # 2. Carton # 3 ITEM DESCRIPTION PART #

Oxford Round. Carton # 1. Carton # 2. Carton # 3 ITEM DESCRIPTION PART # Oxford Round Part # 420833-11 Round Packing List ITEM DESCRIPTION PART # 8 21 24 27 30 33 Carton # 1 Carton # 2 Carton # 3 8 x52 Gray Pearl 130309 1 - - - - - - - - x52 Gray Pearl 130310-1 - - - - - -

More information

INSTALLATION INSTRUCTIONS TOWNSEND

INSTALLATION INSTRUCTIONS TOWNSEND INSTALLATION INSTRUCTIONS TOWNSEND.00 DECK MOUNT BATH FILLER.0 Thank you for selecting American Standard... the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly-please

More information

TC36 CHALET BURNER KIT INSTALLATION INSTRUCTIONS

TC36 CHALET BURNER KIT INSTALLATION INSTRUCTIONS INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this manual for future reference. These instructions are supplementary to the Installation and Operating Instructions supplied with the

More information

Cucina Sintesi M12SF-4TM SS OT Lancellotti G25/25 230/50 NL

Cucina Sintesi M12SF-4TM SS OT Lancellotti G25/25 230/50 NL 268 794 268 3658 297 1246 731 4908 1245 298 1612 1014 5503 1441 1014 1441 1612 CS4503.1 Pg 1.0 268 ZS0511 Cast-iron grid 2 burners Sintesi 2 297 ZS0585 Upper right side support 1 298 ZS0586 Upper left

More information

30-INCH FREE- STANDING GAS RANGE. Model No. GLGFZ386F

30-INCH FREE- STANDING GAS RANGE. Model No. GLGFZ386F Product No. Series 30" f/s gas Color stainless Market North America Wiring Diagram 316417808 Owner's Guide 316417130 Installation Instructions 316259336 Service Data Sheet 316417603 GLGF386DC.eps T24G0012.eps

More information

Ground Clamps Cable Tray

Ground Clamps Cable Tray COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS AND SOLDERLESS CONNECTORS Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both

More information

TC36 COUNTRY HOME BURNER KIT INSTRUCTIONS (NATURAL GAS ONLY)

TC36 COUNTRY HOME BURNER KIT INSTRUCTIONS (NATURAL GAS ONLY) INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this manual for future reference. These instructions are supplementary to the Installation and Operating Instructions supplied with the

More information

Model SBS-10. Stainless Steel Simplex Basket Strainer. 21 Columbus Avenue Garfield, NJ 07026

Model SBS-10. Stainless Steel Simplex Basket Strainer. 21 Columbus Avenue Garfield, NJ 07026 Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model SBS-10 Stainless Steel Simplex Basket Strainer 1/6 Stainless

More information

WILKINS 575A WILKINS 575 SIZE 3/4",1",1 1/4",1 1/2",2",21/2",3",4",6"

WILKINS 575A WILKINS 575 SIZE 3/4,1,1 1/4,1 1/2,2,21/2,3,4,6 WILKINS 575 WILKINS 575A 3/4",1",1 1/4",1 1/2",2",21/2",3",4",6" DESCRIPTION The 575 is a reduced pressure assembly. Production began approximately 1975 under the Richwell model RP name. Around 1978 it

More information

Couplings for Gates Hoses 7 Combination Nipple

Couplings for Gates Hoses 7 Combination Nipple Supersedes 1 Long Shank Couplings for Gates Hoses 7 Combination Nipple Description: Cast brass, serrated shank, set has hex male and hex swivel female couplings, with a washer seal. Threads are GHT or

More information

Model Number Structure

Model Number Structure Solid State Relays Refer to Safety Precautions for All Solid State Relays. Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via

More information