Conservatory awning W8 Description

Size: px

Start display at page:

Download "Conservatory awning W8 Description"

Mervyn Simmons
5 years ago
Views:

1 1 3 4 Application Large-area external sun shading system for shading glazed conservatories, patio roofs and pergolas with flat pitch roofs. Function principle: tensioning system via toothed belt with steel reinforcement. Optimum fabric tension through pre-tensioning of the spring mechanism Operation Motor Including thermal protection and built-in capacitor Torque overload protection: The motor switches off automatically at the upper and lower limit positions. Voltage: V AC Frequency: 50 Hz Degree of protection: IP 44 Connecting cable: Plug connection: mm Hirschmann coupling wired to motor line, enclosed for on-site connection, including enclosure Radio motor or radio plug receiver (optional) includes EWFS hand-held transmitter (1 channel) Mechanical coupling may lead to a displacement of the front rails by ±0 mm (coupling play). Construction limit values in mm External sun shading systems Fabric type Single units Coupled awning sections all quality levels all quality levels Motorised unit Travelling unit Max. surface area (m ) Max. number of coupled sun all quality levels all quality levels all quality levels en/01.01

Shaft () Fabric shaft Material thickness: Dimensions (Ø): Motor shaft Material thickness: Dimensions (Ø): steel, galvanised 1 mm 85 mm groove tube plain aluminium 1.

2 Cover panel (1) two-piece, sides closed Dimensions (W x H): 15 x 170 mm round profile The cover panels are closed at the front by aluminium side covers. The cover panel is equipped with an additional central support for order widths in excess of 4 mm. Shaft () Fabric shaft Material thickness: Dimensions (Ø): Motor shaft Material thickness: Dimensions (Ø): steel, galvanised 1 mm 85 mm groove tube plain aluminium 1.5 mm 50 mm groove tube plain Fixing and connecting parts within the awnings: A steel or aluminium Colours Aluminium parts with chrome-free pretreatment are powder-coated according to latest RAL classic colour chart (with the exception of camouflage and fluorescent colours) or are available in DB 701, 70, 703 as well as eight textured colours (W4914W491), four colours with simulated anodised finish (WC31WC34) as well as additional colours in accordance with the WAREMA standard colour range (in WAREMA colour specification). Other colour specifications, special colours or an anodised finish are available on request (subject to surcharge). Fabric (3) Fabric quality grades: Standard/Exclusive Perfora/All Weather/Reflect For more information on the fabrics, see page 36 Designs: according to our latest WAREMA collection of awnings Special fabrics not included in our current collection of awnings are only available upon request and for an additional charge. Lateral guide (4) Rail with installation groove Dimensions (W x H): single guide rail 3 x 6 mm double guide rail 54 x 6 mm Fixing: guide rail bracket Tensioning element: toothed belt with steel inlay End cap: powder-coated, with deflection bearing For bracket heights exceeding 0 mm we recommend a lateral support for the guide rails. Sensor system (5) integrated wind and sun sensor (optional) The self-powering external light sensor extends the awning when the sun shines; the integrated wind sensor provides fully automatic control according to wind conditions. Guide tube (6) for ordering lengths from 00 mm, one guide tube Dimensions (Ø): 40 mm or 60 mm round profile For widths exceeding 3 mm, the Ø 40 mm profile is equipped with a support, or a Ø 60 mm profile is used. Lead profile (7) with groove for sealing strip Dimensions (W x H): 100 x 65 mm 00106en/

3 Running direction "from bottom to top" The conservatory awning W8 is installed as an external sun shading system. The extension movement of the drop profile reaches from the lower cover panels up to the end of the ascending guide rail. Up to an inclination of 40, the standard design W8 will be used. Above an inclination of (from horizontal), special provisions apply to designs with running direction "from bottom to top". In order to allow any penetrating rain water to drain away, the lower part of the cover panel has additional drainage holes. Therefore, please always specify the roof pitch of the conservatory on your order form. General information: Due to the inclination of the conservatory awning, ingress of water into the cover panel and onto the sun shading product cannot be avoided. Due to the cover panel opening upwards, there is an increased risk of the sun shading product becoming soiled. The awnings are made of acrylic fabric and fabric as standard. Special fabrics are available upon enquiry Order details Please note: Please specify the following clearly on the order form: W8 running direction "from bottom to top" (VUNO) and roof inclination angle! Moreover, there are deviations in the motorisation as compared with the standard version. For the required construction values and order details, please refer to the table below. Construction limit values in mm for W8 "from bottom to top" (From 1 to 40 ) Construction limit values in mm for W8 "from bottom to top" (From 41 to 90 ) Awning fabrics Single units Coupled awning sections Awning fabrics Single units Coupled awning sections Motorised Travelling unit unit Motorised Travelling unit unit Max. surface area (m ) Max. surface area (m ) Max. number of coupled sun Max. number of coupled sun en/01.01

4 , internal sun shading system Application Large-area internal sun shading systems for shading glazed surfaces. Cover panel (1) Technical description see page347.. For order widths exceeding 4000 mm, the top of the cover panel is equipped with a wall/ceiling support. Shaft () Fabric (3) Lateral guide (4) Only individual units available. Special guide rail brackets for wall or soffit mounting available. Cable cross brace (5) steel, corrosion-resistant Sheathing: polyamide Dimensions (Ø): 3.3 mm Colour: black Fixing: (top) steel wire clamps (bottom) steel wire clamps with spring tension devices The cables are guided through the boreholes in the angle profile on the lead profile. Construction limit values in mm Max. unit length max. axial dimensions Min. axial dimension(s) max. surface area m Awning type Single unit Note Conservatory awnings W8 (standardised internal sun shading system) are available only as individual units, i.e. no coupled curtains and/or no motor/end bearing situations are possible!). Each awning section requires guide rails of its own! Deviations from the standard version on the inside must be discussed with and approved by our application technology department. Guide tube (6) Technical description on page 347. For order widths from 3 mm, a profile Ø 60 mm is used. Lead profile (7) For the technical description, see page347.. Colours Aluminium parts with chrome-free pretreatment are powder-coated according to latest RAL classic colour chart (with the exception of camouflage and fluorescent colours) or are available in DB 701, 70, 703 as well as eight textured colours (W4914W491), four colours with simulated anodised finish (WC31WC34) as well as additional colours in accordance with the WAREMA standard colour range (in WAREMA colour specification). Other colour specifications, special colours or anodised finish are available for an additional charge. Safety instructions In gyms, multi-purpose halls or similar, the awning must be protected against shocks (ball games), impacts etc. by appropriate features like fences, nets etc. Do not use in indoor pools due to the chlorine atmosphere. It is imperative that the installation instructions and the relevant appendices are adhered to. Accident prevention regulations from trade associations must be observed. Specifications of the manufacturers of dowels and fixing materials must be observed. Annual maintenance is required en/

5 Conservatory awnings Accessories Single unit motor drive (incl. switch) Radio-controlled motor (incl. 1-channel handheld transmitter) Integrated sensor technology mechanically coupled awning sections awning sections Dimensions of the: Guide rails [mm] Cover panels [mm] Drop profiles [mm] l standard m optional not available Type W10 Type W10 Type W6 Type W8 Conservatory awnings Design adapted to type W6 Type D Design adapted to type W8 Type W5 Type W7 l l l l l l l l m m m m m m m m m m m 45 x x 60 /50 x 553/54 x 6 /50 x 55 3/54 x 6 57 x x x x x x x x x 8 14 x x x x x x 64 Surface treatment of the aluminium components Powder-coated in All RAL Classic colours in accordance with the WAREMA standard colour range Special coating C0 anodised Colour anodised Awning fabrics Standard/Exclusive acrylic fabric All Weather acrylic fabric Perfora acrylic fabric Reflect acrylic fabric Special situations Installation outdoors Inside installation from bottom to top Elevation over 0 m m m m m m m m m m m m m m m l l l l l l l l m m m m m m m m l l l l l l l l m m m m m m m 00106en/

Technical data. Patio awnings. 550 Cassette Folding Arm Awning

Technical data. Patio awnings. 550 Cassette Folding Arm Awning Technical data Patio awnings 550 Cassette Folding Arm Awning Valid from 01.03.2017 WAREMA patio awnings for individual sun protection WAREMA awnings are an eye-catching feature for any building. The large