Amphenol RF Interconnects TNC 31 Series Threaded Lock RF Connector System Materials
|
|
- Amber Stokes
- 5 years ago
- Views:
Transcription
1 TNC 31 Series Threaded Lock RF Connector System Materials Body/Finish Contacts Centre MALE Centre FEMALE Insulator Gasket Crimp Ferrules* *Metal finishes Durability Brass/Nickel Brass/Gold Plated (Au) Phosphor Bronze/Au Delrin/PBT Polyester Silicone Rubber Annealed Copper Nickel (Ni) or Gold (Au) 00 Cycles Crimp/Crimp Straight Plug Electrical Impedance 0 ohm Frequency range 0-11 GHz Voltage 00 VRMS Dielectric withstand 100 VRMS VSWR Straight 1.3 max R/A 1. max Resistance Inner 3 Milliohm max Outer 2 Milliohm max Insulator 000 Megaohm min Part Number: Cable Ferrule Description RFX RFX RG/U 9/62 Captive Contact RFX Plenum 8/ RFX Plenum 9/ RFX RG/U 14/188/ RFX RG/U 19/ RFX RG/U 14/188/ RFX RG/U 19/ T1121x1ND3Gxxx0 Non-Captive Contact Termination Instruction F Pin-to-Pin Contact +/- 1.1 Environmental Temp. range -6 C thru 16 C Shock Consult Representative Humidity Consult Representative Vibration Consult Representative Corrosion Consult Representative Related Information Hand Tools Page W-1 Termination Instr. Page U-3~U-38 Terminology Page U-38 Ferrule 1 Ferrule 2 Ferrule 3 Ferrule 4 Crimp/Crimp Right Angle Plug Part Number: Cable Ferrule Description RFX RFX RG/U 9/ RFX Plenum 8/141 Short Body RFX Plenum 9/62 RG/U RFX 14/19/18/188/ RFX RFX RG/U 9/ RFX Plenum 8/ RFX Plenum 9/ RFX RG/U 14/188/ RFX RG/U 19/18 Various Straight Plugs Termination Instruction F Part Number: Cable Fig Description RFX S/R.08 A:2.2 B:3.0 Solder for Semi-Rigid RFX S/R /141 A:2.2 B4.6 8 Cable Termination Instruction S RFX RG/U 8 Twist-On for Solid Centre RFX RG/U 9 9 Conductor Termination Instruction K RFX RFX RG/U 9/62 98-RFX 92-RFX RG/U 9/ T1112x1ND3Gxx0/T1122x1ND3Gxxx0 T1131x1ND3Gxxx0/T1141x1ND3Gxxx0/T1181A1ND3Gxxx0 Clamp/Solder Captive Contact Termination Instruction I Clamp/Solder Termination Instruction H Short Body Ferrule Ferrule 6 Ferrule Fig 9 Fig 8 Fig 10 Fig 11 ARFA/RF U-18
2 TNC 31 Series Threaded Lock RF Connector System continued Crimp/Crimp Straight Jack Termination Instruction Ferrule 1/2/4 - E, Ferrule 3 - F T6121x1Nx3Gxxx0 Part Number: Cable Ferrule Description/Insulator RFX RFX RFX RG/U 9/ RFX RFX Plenum 8/ RFX RFX Plenum 9/ RFX RFX RG/U 14/188/ RFX RG/U 19/ RFX RG/U 14/188/316 4 Pin-to-Pin Contact Crimp/Crimp Bulkhead Jack Termination Instruction Ferrule /6//8/10/11/12 - E, 9/13 - F T6421x1Nx3Gxxx0/T621x1Nx3Gxxx0/T631BxND3Gxxx0/ T661B1NNYL3G0 Part Number: Panel Size/Cable Ferrule Description RFX 3.mm RFX RFX 6.mm RFX RG/U 9/ RFX 3.mm RFX RFX 6.mm RFX RG/U 9/ RFX 3.mm RFX Plenum 8/ RFX 6.mm RFX Plenum 9/ RFX 3.mm RFX Plenum 8/ RFX 6.mm RFX Plenum 9/ RFX RG/U 14/188/ RFX RG/U 19/ RFX RG/U 14/188/ Pin-to-Pin Contact RFX 3.mm 31-8-RFX RFX 6.mm RFX RG/U 9/ RFX 3.mm RFX RFX 6.mm RFX RG/U 9/ RFX RG/U 14/188/ RFX RG/U 19/ RFX (L) 3.2mm Solder-Pot RFX (L) 6.mm Solder-Pot RFX (L) 9.mm Solder-Pot 14 Delrin RFX (L) 3.2mm Solder-Pot Various Straight Jacks T6131A1ND3Gxx0/T61A1NT3G0/T1141A1ND3Gxx0 Part Number: Cable Fig Description RFX RG/U 8 Twist-On for Solid Centre RFX RG/U 9 1 Conductor Termination Instruction K RFX Solder-Pot 16 4-Hole Flange Mount 9600-RFX RFX RG/U 9/62 ARFA/RF RFX is isolated from Ground Clamp/Solder Captive Contact Termination Instruction I Ferrule 1 Ferrule 2 Ferrule 3 Ferrule 4 Fig 1 Ferrule Fig 16 Ferrule6 Ferrule Ferrule 8 Ferrule 9 Ferrule 10 Ferrule 11 Ferrule 12 Ferrule 13 Ferrule 14 Fig 1 U-19
3 TNC 31 Series Threaded Lock RF Connector System continued PCB Mount Straight Plastic Jack PCB Mount Right Angle Plastic Jack PCB Mount Right Angle Metal Jack T621GxNPP3G0 T622HxNPP3G0 T622HANPP3G RFX White Bulkhead Housing RFX White Bulkhead Housing RFX Black Bulkhead Housing RFX Black Bulkhead Housing RFX Bulkhead T41A1ND3G0 T41B1ND3G0 T1B1ND3G RFX Includes Gasket 9100-RFX Not Including Gasket RFX Metal Mounting Threads Jack-to-Plug TEE Adapter Jack-to-Jack-to-Jack TEE Adapter Jack-to-Jack Straight Adapter T903A1ND3G0 T803A1ND3G0 T01A1ND3G0 900-RFX Delrin TRFX Delrin RFX Delrin Jack-to-Jack Straight Adapter Plug-to-Plug Straight Adapter Plug-to-Jack Right Angle Adapter T01A2ND3G0 T201A2ND3G0 T02A1ND3G RFX Delrin RFX Delrin 912-RFX Delrin ARFA /RF U-20
4 Termination Instructions Amphenol A Cable Solder (Semi-Rigid) B Cable Solder (Semi-Rigid) C Cable Crimp STEP 3. Solder the BODY to cable as (Avoid excessive heat which may distort dielectric.) STEP 4. Place the RETAINER RING in the groove of BODY, and put the GASKET in the position as STEP. Compress the BODY assembly and assemble the SHELL as catalog CONTACT PIN and solder it as shown STEP 4. Solder the MAIN BODY to cable as shown (avoid excessive heat which may distort dielectric). Then press the INSULATOR into the MAIN BODY until it stops. STEP 3. Slide the HEX NUT and FERRULE onto cable. Then insert the BARREL into braid and dielectric, and slide the FERRULE over braid and crimp it as STEP 4. Slide the REAR INSULATOR against the BARREL. Then insert inner conductor into the CONTACT PIN and solder it as STEP. Slide the FRONT INSULATOR against the REAR INSULATOR. STEP 6. Insert cable and parts into the NUT until it is tight. D Cable Solder (Semi-Rigid) E Cable Crimp/Crimp F Cable Crimp/Crimp STEP 3. Solder inner conductor to the contact pin of MAIN BODY, and solder cable jacket to the MAIN BODY as STEP 4. Screw the NUT into the MAIN BODY until it stops. A crimp tool is necessary to complete the termination. CONTACT PIN and crimp it with the crimp tool as Then slide the FERRULE onto cable. STEP 4. Insert the MAIN BODY into braid and dielectric. STEP. Slide the FERRULE over braid and crimp it with the crimp tool as A crimp tool is necessary to complete RECOMMENDED DIM S in CONTACT PIN and crimp it with the crimp tool the FERRULE onto cable. STEP 4. Insert the MAIN BODY into braid and dielectric. STEP. Slide the FERRULE over braid and crimp it with the crimp tool as U-3
5 Termination Instructions Amphenol G Cable Crimp/Crimp H Cable Clamp/Solder I Cable Clamp/Solder A crimp tool is necessary to complete the termination. STEP 3. Slide the FERRULE onto cable, then fold back braid wire and slide the SPACER and INSULATOR onto dielectric as STEP 4. Insert inner conductor into the CONTACT and crimp it with the crimp tool as STEP. Push cable and parts into the MAIN BODY until it stops. Then slide the FERRULE over braid wire and against the MAIN BODY and crimp it with the crimp tool as CONTACT and solder it as Then slide the HEX NUT, WASHER, and GASKET onto cable. STEP 4. Place the BRAID CLAMP over braid and push back against cable jacket. Fold back braid wire as STEP. Insert cable and parts into the NUT until it is tightened. J Cable Wedge Compression K Cable Twist-On L Cable Clamp STEP 3. Slide the HEX NUT, WASHER, and GASKET onto cable one by one. STEP 4. Place the BRAID CLAMP over braid and push back against cable jacket. Fold back braid wire as shown, and slide the RING and REAR INSULATOR against the BRAID CLAMP. Then insert inner conductor into the CONTACT PIN and solder it. STEP. Insert cable and parts into the NUT until it is tightened. STEP 1. STEP 2. STEP 3. STEP 4. dielectric, braid, and jacket as per "RECOMMENDED CABLE STRINPPING DIM'S " in STEP 3. Slide the HEX NUT onto cable, then insert the CONTACT ASSEMBLY under braid and jacket. STEP 4. Insert cable and parts into the NUT until it is tight. STEP 1. The connector is STEP 3. Twist braid in a clockwise direction so that at least 0.8mm of dielectric is bared, and braid is left flat. STEP 4. Insert inner conductor into the back end of connector gently, and feed it into the contact. STEP. Push and screw the connector onto cable in a clockwise direction until it stops. STEP 1. STEP 2. STEP 3. STEP 4. STEP. STEP 6. All parts of the connector are Strip the cable inner conductor, STRIPPING DIM S in Then slide the NUT, WASHER, and GASKET onto cable. Place the BRAID CLAMP over braid and push back against cable jacket. Fold back braid wire as Slide the RING against the BRAID CLAMP. Then insert inner conductor into the CONTACT PINS and solder them. Insert the CONTACT PINs into the INSULATOR until the INSULATOR is against the TOP HAT. Insert cable and parts into the MAIN BODY, aligning slot of the INSULATOR with key in the MAIN BODY. Then screw the NUT until it is tight. U-36
Smallest Connector with Removable Contacts
1 Ultra-Miniature 8STA Size 01 Connectors Smallest Connector with Removable Contacts Ultra compact design and very lightweight connector dedicated to the harshest of motorsport environments. Innovative
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. One-piece connector body: Fastest assembly Field installable Anaerobic epoxy
More informationINSTALLATION INSTRUCTIONS TOWNSEND
INSTALLATION INSTRUCTIONS TOWNSEND.00 DECK MOUNT BATH FILLER.0 Thank you for selecting American Standard... the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly-please
More informationI- 39. Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General Information and special features.
Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General nformation and special features. - 39 Seal out oil, water, dirt, dust and fumes wherever liquidtight flexible metal conduit
More informationINSTALLATION GUIDELINES
IMPORTANT: To ensure this product is installed properly, you must read and follow these guidelines. The owner/user of this product must keep this information for future reference. This product must be
More informationTank. Part B, Section 1. This section covers the following unit configurations. Pump Piston Pump (E or G)
Part B, ection Model Voltage This section covers the following unit configurations. 3400V All Pump Piston Pump (E or G) Manifold Control 4-Port (A) Vista tandard (V) Vista Pattern (PC) Vista Temperature
More informationFOREWORD CONTENTS. 1. Preparation and tools required for assembly. 2. Complete parts
CONNECTOR ASSEMBLY INSTRUCTION MANUAL FOREWORD Thank you for purchasing FOCI s MT-RJ Optical Fiber Connectors. We are confident that our excellent manufacturing procedures and stringent quality control
More informationELE-3COP-375 Title - Braid termination using a Band Strap Adaptor.
Before starting work please read this document carefully and note the guidance given. 1 Purpose and Scope This COP describes the procedure to be used when carrying out the installation of a Band Strap
More informationData Sheet for Precision Potentiometer
AL(R)17/19 soldering lugs The AL(R)17/19 potentiometers in 22 mm housing are suitable for applications where a precise and economical multiturn potentiometer is important. Economical and precise multiturn
More informationPARTS LIST COLT COLT HEPA
PARTS LIST COLT 800-1250 - 1450 COLT HEPA - 1250-1450 MOTOR / LID ITEM PART NO. PART DESCRIPTION QTY. 101 0891201 TOP COVER 1 102 0294341 TOP MOTOR SEAL 1 103 0299861 STRAIN RELIEF CORD CLAMP 1 104 0891131
More informationApplications Engineering Notes
Applications Engineering Notes Document Title Document Number MTP Brand Connector Installation Onto AEN-1401 Revision Number 2.1 Effective Date November 15, 2011 THE USE OF SAFETY GLASSES FOR EYE PROTECTION
More informationCouplings for Gates Hoses 7 Combination Nipple
Supersedes 1 Long Shank Couplings for Gates Hoses 7 Combination Nipple Description: Cast brass, serrated shank, set has hex male and hex swivel female couplings, with a washer seal. Threads are GHT or
More informationGround Clamps Cable Tray
COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS AND SOLDERLESS CONNECTORS Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both
More informationAND LOAD CANOPY RACK SPECIFICATIONS
8MAY15 INSTRUCTIONS for the LOCK AND LOAD CANOPY RACK SPECIFICATIONS and SAFE LOADING REQUIREMENTS The Lock and Load ladder carrier for Truck Caps is a rack designed to mount to the top of a pickup truck
More informationM129 SERVICE MANUAL- M129 MODEL #G-2 MANUAL CAN OPENER
SERVICE MANUAL- M129 MODEL #G-2 MANUAL CAN OPENER Model #G-2 Can Opener Assembly Procedure The Model #G-2 can opener will be assembled according to the following procedure. I. Model #G-2 Handle and Arbor
More informationTerminals & Connectors
Your Connection Since 1970 Terminals & Connectors 2 TABLE OF CONTENTS Adapters........................... 13 Brazed Barrel Lugs................... 16-17 Bullet Connectors....................9-10 Butt Connectors.......................3
More informationPLATINUM MODEL WITH AUTO-RETRACT AND REMOTE CONTROL. Owner s Manual
PLATINUM MODEL WITH AUTO-RETRACT AND REMOTE CONTROL Owner s Manual THIS MANUAL CONTAINS INSTRUCTIONS FOR UPGRADING BOTH THE GOLD MODEL ONE-TOUCH AND THE ONE-TOUCH MODEL WITH THE KEY SWITCH TO THE PLATINUM
More informationSTRAIGHT BLADE RECEPTACLES
STRAIHT BLADE RECEPTACLES ENERLITES INC. offers a full line of 15 A, 20 A, 30 A and 50 A Receptacles available in Residential rade, Commercial rade, and Industrial rade. ENERLITES Receptacles are precision-manufactured
More informationInstallation Instructions
THE COLLECTION by Installation Instructions 0 BIDET FITTING Thank you for selecting American-Standard...the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly--please
More informationData Sheet for Precision Potentiometer
The ALI(R)17/19 potentiometers in mm housing are suitable for applications where a precise multiturn potentiometer increased radial shaft loads is important. ALI(R)17/19 reinforced bearing ALI(R)17/19
More informationPROFIBUS Cordsets Technical Data
These pre-tested molded cordsets utilize high-quality continuous flex cable and integral molded strain relief. They are designed to provide interconnection between simple devices such as sensors and actuators
More informationLSC19 Lighting Cable Assemblies and Connectors
PowerFLEX Cable Assemblies PowerPARTS Wiring Devices ISO 9001:2008 LSC19 Lighting Cable Assemblies and Connectors PowerFLEX and PowerPARTS Introducing a new generation of Lex Products 19 pin, 6-circuit
More information* * KR54-F, KR9854 & KR9954 Installation Instructions. Read All Warnings Before Starting Installation! Index:
*941061-00* 941061-00 Keyed Removable Mullion KR54-F, KR9854 & KR9954 Installation Instructions CLASSIFIED CLASSIFIED C Read All Warnings Before Starting Installation! Index: General Information ----------------
More informationReverse Osmosis system 50 GPD Instruction manual EN
Reverse Osmosis system 50 GPD Instruction manual EN Contents 1. Unpacking 2. Scope of supply 3. Insertion of the membranes 4. Connecting the lines 5. Installation 6. First commissioning 7. Consumables
More informationSealing and terminating Wrexham Mineral Cables
Sealing and terminating Wrexham Mineral Cables A Termination is required at both ends of each length of cable, and it should be fitted as soon as the cable has been prepared. A complete termination consists
More informationCEELOK FAS-T CONNECTORS
CEELOK FAS-T CONNECTORS Small Form Factor, Field Terminable Connectors CeeLok FAS-T connectors ofer a small form factor, ield terminable I/O connector capable of 0 Gb/s Ethernet. Crimpsnap contacts enable
More information2M804 Push-Pull Crimp Receptacles Ordering Guide for 2M , 002, 003, 004
Push-Pull Crimp Receptacles Ordering Guide for -001, 002, 003, 004 Micro38999 1. 2. 3. 4. 5. 6. 7. SERIES SHELL SERVICE SHELL SIZE-INSERT CONTACTS KEYING SUFFIX STYLE CLASS ARANGEMENT -00X -06 ZNU 6-7
More informationstyle vision & quarter turns quarter turns section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
quarter turns vision & style quarter turns INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 3 quarter turns No. 626-PK Patent Pending
More informationParts Catalog T7/T71/T73 M40000/M40001/M40003
T7/T71/T73 M40000/M40001/M40003 REPAIR PARTS CATALOG NO. M30202(R) For Machines with Serial No. T6183-T9031 ISSUED July 2009 ORDERS Please use Part Numbers when ordering and include the the machine Serial
More informationGrounding Clamp. Pins and Ball-Socket Clamps for Temporary Grounding
Grounding Clamp Pins and Ball-Socket Clamps for Temporary Grounding Pins and Ball-Socket Clamps have been designed to solve several temporary grounding situations, where the physical space or the contact
More informationProduct Specification
HDBNC-BH1 Jack, Right Angle Orientation, PCB Terminated HDBNC-CA Plug, Straight Orientation, Cable Terminated Other configurations available for: Vertical cable-to-board applications Through-hole, edge
More informationApplication Tooling Specification
Order No. 200218-3100 FEATURES Application Tooling Specification A full cycle ratcheting hand tool ensures complete crimps Long handles for comfortable crimping with reduced crimping force and a safety
More informationPLATINUM MODEL WITH AUTO-RETRACT AND REMOTE CONTROL. Owner s Manual
PLATINUM MODEL WITH AUTO-RETRACT AND REMOTE CONTROL Owner s Manual THIS MANUAL CONTAINS INSTRUCTIONS FOR UPGRADING BOTH THE GOLD MODEL ONE-TOUCH AND THE ONE-TOUCH MODEL WITH THE KEY SWITCH TO THE PLATINUM
More informationCrimp & Cleave Termination Instructions for 200 µm F07 Connectors
Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for 200 µm F07 Connectors For Use With: F07 Termination Kits 200 µm HCS Fiber-Optic Cable F07 Crimp & Cleave Connectors Important
More informationCrimp & Cleave Termination Instructions
Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for 200 µm Harsh Environment SMA For Use With: 200 µm HE SMA Termination Kit 200 µm HCS Fiber-Optic Cable HE SMA 200 µm Crimp
More informationApplications Engineering Notes
Applications Engineering Notes Document Title Document Number MTP Brand Connector Installation Onto 3.0 mm Jacketed Round Cable With Loose Fibers AEN-1407 Revision Number 2.1 Effective Date November 15,
More informationtttttt www.wealdelectronics.com This publication is issued to provide outline information only and unless specifically agreed to the contrary by WEALD ELECTRONICS LTD. in writing, is not to form part of
More informationParts Catalog T7/T71/T73 M40000/M40001/M40003
T7/T71/T73 M40000/M40001/M40003 REPAIR PARTS CATALOG NO. For machines starting with Serial No. T10001 ISSUED August 2010 ORDERS Please use Part Numbers when ordering and include the machine Serial Number
More informationBARE FIBER OPTIC TERMINATOR
BARE FIBER OPTIC TERMINATOR Reusable Terminator for Single Mode and Multimode Fiber FC/PC, FC/APC, SMA905, ST /PC, SC/PC, or LC/PC Compatible Connectors Terminator Accepts Bare Fiber up to Ø1400 µm Application
More informationquick and easy installation guide
www.directdriveopener.com quick and easy installation guide Back 2 Front. Motor Carriage 2. C-rail. Chain. Limit stops. Slide in part (tensioner) Rail assembly Insert C-rail parts () into the connecting
More informationRetractable Hose Reel
Retractable Hose Reel installation and Operation Please read before use We recommend keeping these instructions for future reference Hose Reel must be mounted before use Keep the hose retracted when not
More informationPRODUCT MANUAL - M096
PRODUCT MANUAL - M096 MODEL 270 ELECTRIC CAN OPENER 1 I. LABELS L087--CAUTION 2 II. SPECIFICATIONS MODEL NO. 270 POWER 115 VOLT, 1.5 AMP, 50-60HZ REQUIREMENTS 230 VOLT, 0.8 AMP, 50-60 HZ NORMAL SPEED 200-250
More informationParts Catalog EVM/EVM2/EVM3 REPAIR PARTS CATALOG NO. M50206(V)
EVM/EVM2/EVM3 REPAIR PARTS CATALOG NO. ISSUED APRIL 2016 ORDERS Please use Part Numbers when ordering and include the machine Serial Number (found on the electrical data plate) to insure that you will
More informationSteadiCam Parts List*
SteadiCam Parts List* A. 1 Bogen 3232 Monopod Swivel Tilt Head B. 1 1/2 internal to 1/2 external brass bushing flare adapter (part 9402249 at osh.com¹) C. 2 3/8 internal to 1/2 external brass bushing flare
More informationSERVICE SHEET 34" WALK-BEHIND POWER TROWEL MODEL FT34 (THIS SERVICE SHEET APPLIES TO THE TROWELS WITH SERIAL NUMBER AND AFTER) WARNING
34" WALK-BEHIND POWER TROWEL (THIS APPLIES TO THE TROWELS WITH SERIAL NUMBER 0837 AND AFTER) WARNING To reduce the risk of injury, all operators and maintenance personnel must read and understand these
More information2.92mm Connector Series
38 Performance Features Connector Series Materials/Finishes Website: www.ainfoinc.com Email: sales@ainfoinc.com Nominal Impedance 50ohm Housing: Type 303 Stainless Steel-Polished&Passivated Frequency Range
More informationTITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V
TITAN pt. no.: 02 0000 0128 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationPARTS LIST EXTRACTOR ACCESSORIES
PARTS LIST EXTRACTOR ACCESSORIES 3 - JET WAND - 4097101 101 4097961 HANDLE ASSEMBLY - INCLUDES: 1 102 9121210 1/4-20 X 5/8 HEX BOLT 2 103 ---------- HANDLE CLAMP 1 104 9120920 1/4-20 HEX NUT 2 105 9120777
More informationMounting Type Contact form Quick-connect Screw terminals PCB terminals. E-bracket SPST-NO G7L-1A-T G7L-1A-B
A High-capacity, High-dielectricstrength Relay Compatible with Momentary Voltage Drops No contact chattering for momentary voltage drops up to 0% of rated voltage. Wide-range AC-activated coil that handles
More informationFLEXIBLE METAL HOSE.
FLEXIBLE METAL HOSE info@ayvaz.com www.ayvaz.com 2 FLEXIBLE METAL HOSES INDUSTRIAL HOSES BRAIDED AND NON-BRAIDED HOSES WITHOUT FITTINGS Standard and open pitch corrugated metal hose AISI 304 or AISI 321
More informationApplications Engineering Notes
Applications Engineering Notes Document Title Document Number MTP Brand Connector Installation Onto AEN-1420 Revision Number 1.1 Effective Date January 17, 2017 THE USE OF SAFETY GLASSES FOR EYE PROTECTION
More informationAmerican Classic Rear Terrain Hub Bearing Change, Cassette Body Swap and Overhaul Instructions.
12 x 142mm Thru Axle Retrofit Page 1 IDENTIFY YOUR TERRAIN HUB To identify, see the non-drive side of the hub (side without the cassette). Terrain hubs are in Terrain, Terrain Tubeless, and TCX Trekking
More informationParts Catalog. Slicing Machine G10. Model:
, 07 995079 ECN 96 Parts Catalog Slicing Machine G0 Model: G0 /8/7N Rev. E, Serial Number 4048 and Up IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER
More informationT&B Fittings. Industrial Fittings. Liquidtight Flexible Nonmetallic Conduit Fittings. Specifications Type A Conduit Fittings
T& Fittings Liquidtight Flexible Nonmetallic onduit Fittings Specifications Type onduit Fittings Series 6302 Liquidtight Flexible Nonmetallic onduit Fittings pplication To provide a liquidtight, dustight
More informationDEUTSCH H91 Series Filter Connectors MIL-DTL SERIES I
MIL-DTL-38999 Series I connectors are subminiature, environmental-class connectors with high and mediumdensity insert arrangements. They are used where a quickdisconnect coupling system is required for
More informationInstruction Manual Remote Swabbing and Microbiological Sampling and Teflon template tools Version , Rev.0
ASSEMBLY AND OPERATIONAL INSTRUCTIONS The remote swabbing and microbiological sampling tool and the Teflon template tool are shipped partially assembled. Complete assembly instructions are provided below:
More informationMYRIAD Banner Stand is a trademark of Skyline Exhibits. Patent Pending PN32294-B. MYRIAD Banner Stand
is a trademark of Skyline Exhibits Patent Pending 1.1 1. Banner Stand Setup 1.1 Remove banner stand from standard case or Arrive Portable Display & Workstation and assemble pole. 1.2 Insert pole into base
More informationPrimrose Awnings - Full Cassette Manual & Electric Instructions
Primrose Awnings - Full Cassette Manual & Electric Instructions Contents Warning 2.0m - 3.5m Awnings 8 x Expansion bolts ** 2 x brackets 1 x Awning 1 x Winder 4.0m - 5.0m Awnings 12 x Expansion bolts **
More informationGARAGE DOOR OPENER. Owner s Manual ENGLISH 3/4 HP. For Residential Use Only Model
Owner s Manual 3/4 HP GARAGE DOOR OPENER For Residential Use Only Model 139.18590 ENGLISH Read and follow all safety rules and operating instructions before first use of this product. Fasten the manual
More informationBEV-TENT COMPONENTS. Made in South Africa
BEV-TENT COMPONENTS REB MARKETING Distributing Agent Tel: (011) 452 9131 Cell: 072 965 6792 Fax: (011) 609 4615 15 Imvubu Road, Sebenza Ext 6, Edenvale orders@rebmarketing.co.za BEV-TENT 001 90 deg Elbow
More informationCabinet Mount Assist Lift n Lock Instructions
Cabinet Mount Assist Lift n Lock Instructions PART LIST 2 @ Gas Cylinder 1 @ Lock Bar 2 @ Rubber Sleeve (preset) 4 @ Stopper Pin (2pcs preset) 4 @ Saddle Block 8 @ 19mm Black PVC Cap 5 @ 14mm Black PVC
More informationVanagon Ladder Kit Assembly & Installation Instructions
Rocky Mountain Westy Vanagon Ladder Kit Assembly & Installation Instructions Introduction Thank you for purchasing the Rocky Mountain Westy Vanagon Ladder Kit. We pride ourselves in the products we develop
More informationCrimp & Cleave Termination Instructions for 200 µm Harsh Environment SMA
Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for 200 µm Harsh Environment SMA For Use With: 200 µm HE SMA Termination Kit 200 µm HCS Fiber-Optic Cable HE SMA 200 µm Crimp
More informationCABLE CUTTING, STRIPPING AND CRIMPING TOOLS
Cutting 38-39 Stripping 39 0 - CBE CUTTING, STRIPPING ND CRIMPING TOOS Ergonomic handles Surface protection High precision Flexibility With ergonomic handles and a specially The pliers are made of excellent
More informationFERRULES & TOOLS Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)
TerminalBlocks_072012(alt-2).QD_Blocks 10/23/12 9:05 AM Page 117 To help you do the best job possible when using Altech s terminal blocks, we put together a selection of useful tools to accomplish just
More informationEPIC Rectangular Connectors HBE 24 Plugs & Receptacles
HBE 24 Plugs & Receptacles HBE 24 SCREW & CRIMP TERMINATED INSERTS SCREW TERMINATED View from Cable Side CRIMP TERMINATED Contacts Sold Separately Description Screw Terminated with wire protection Screw
More informationFIBER OPTIC CLOSURES
FIBER OPTIC CLOSURES In-line type and dome type - series CLS-I, CLS- IF2X, CLS-D, CLS-DF2X144 and CLS-DF2X240 PACIFIC INTERCONNECTIONS - connecting the world with fiber optics IN-LINE TYPE FIBER OPTIC
More information2M Hermetic General Information. Why 2M Hermetic? GHEC 81. Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard. Page Guide.
2M General Information Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard Averaging less than half the size and weight of their 38999 ancestors, Amphenol s 2M Micro38999 series are an
More informationPower Relay RCE. Ordering Information. A High-capacity, High-dielectric-strength Relay Compatible with Momentary Voltage Drops
Power Relay A High-capacity, High-dielectric-strength Relay Compatible with Momentary Voltage Drops No contact chattering for momentary voltage drops up to 0% of rated voltage. Wide-range AC-activated
More informationER36D Range. IMPORTANT: This model is not approved for field conversions of gas types or altitude settings.
ER6D Range Page Description Page Description Cooktop Assembly Cooktop Parts Burners & Tubes 5 Manifold Assembly 6 Manifold Parts 7 Control Panel Assy 9 Oven Assembly 0 Oven Parts Exterior Components Exterior
More informationOperating Instructions
A) ORIENTATION View capsule filling video online at www.profiller.com Cam Lever 1. Place Caps Tray onto Filler with Position I and II markings in front. Check that Cam Lever is set to 3 o clock. 2. Pour
More informationCrimp & Cleave Termination Instructions
Crimp & Cleave Termination Instructions for 200 µm Factory5 Cable with ST and SMA Connectors For Use With: 200 µm ST and SMA Factory5 Termination Kits 200 µm HCS Factory5 Fiber-Optic Cable ST and SMA Factory5
More informationPARTS LIST eforce Burnisher
PARTS LIST eforce Burnisher HEAD ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 6496721 MOTOR 36 VOLT, 2100 RPM, 3.6HP [see pages 16,17] 1 102 9121410 5/16 EXTERNAL STAR LOCK WASHER PACK OF 10 2 103 6492051
More informationINSTALLATION INSTRUCTIONS AND OWNER'S MANUAL AWNINGS. For trailers & motor homes with straight sides TOOLS REQUIRED
AWNINGS INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL For trailers & motor homes with straight sides TOOLS REQUIRED 1/4" electric drill Ratchet handle kit 3/8" & 7/16" socket No. 1 and No. 2 screwdriver
More informationRTA flexible conduits
[ PROTETION OF LES ] Products and systems RT flexible conduits For each application and environmental stress there is a corresponding polyamide, PV or metal-plastic flexible conduit solution, ideal for
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS KR54, KR1654, & KR4954 Keyed Removable Mullion NOT FOR USE ON ELECTRIC OR FIRE RATED MULLIONS. This kit includes the following parts: (Not to scale) WARNING Remove key, reinstall,
More informationCrimp & Cleave Termination Instructions for 200 µm Factory5 Cable with ST and SMA Connectors
Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for 200 µm Factory5 Cable with ST and SMA Connectors For Use With: 200 µm ST and SMA Factory5 Termination Kits 200 µm HCS Factory5
More informationCore Systems Installation Instructions
185-3017 185-3018 185-3517 607-0149 WLH 09/17/18 TABLE OF CONTENTS ***Assembly*** Roller Tube Assembly Roller Tube Assembly... Standard Application Attaching Tarp to Roller Tube - Standard... Installing
More informationIMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2204A
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2204A Warnings Truck Bed and Camper Protection Torklift does not recommend installing your camper on top of a plastic bed liner (or other compressible
More informationHVAC Products for Better Ductwork Product Overview
HVAC Products for Better Ductwork Product Overview for better ductwork TABLE OF CONTENTS ACCESS DOORS For Rectangular Duct and Other Flat Surfaces RD Access Doors Page 1 RD Access Door Adapter Kit for
More informationEVM - Liberator REPAIR PARTS CATALOG NO. M50206(K) FOR MACHINES STARTING WITH SERIAL NO ISSUED AUGUST Parts Catalog
EVM - Liberator REPAIR PARTS CATALOG NO. M50206(K) FOR MACHINES STARTING WITH SERIAL NO. 5100 ISSUED AUGUST 2003 ORDERS Please use part numbers when ordering and include the serial number of the machine
More informationInstallation Guide. Single-Control Kitchen Sink Faucets
Installation Guide Single-Control Kitchen Sink Faucets K-6352 K-6353 M product numbers are for Mexico (i.e. K-12345M) Los números de productos seguidos de M corresponden a México (Ej. K-12345M) Français,
More informationBEV-TENT COMPONENTS. Made in South Africa
BEV-TENT COMPONENTS REB MARKETING Distributing Agent Tel: (011) 452 9131 Cell: 072 965 6792 Fax: (011) 609 4615 15 Imvubu Road, Sebenza Ext 6, Edenvale orders@rebmarketing.co.za BEV-TENT 001 90 deg Elbow
More informationInsulated Tools. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P Insulated Tools r o f e s s i o Klein insulated tools maintain the highest level of quality Klein is known for, and they offer added protection against shock from energized sources with voltage
More informationER36D Range. IMPORTANT: This model is not approved for field conversions from one gas type to another and from one altitude setting to another.
ER36D Range Page Description Page Description 2 Cooktop Assembly 3 Cooktop Parts 4 Burners & Tubes 5 Manifold Assembly 6 Manifold Parts 7 Control Panel Assy 9 Oven Assembly 0 Oven Parts Exterior Components
More informationRETRACTABLE AWNING w/ OPTIONAL HOOD ASSEMBLY INSTRUCTIONS
Contact us @ (800)851-0865 RETRACTABLE AWNING w/ OPTIONAL HOOD ASSEMBLY INSTRUCTIONS Congratulations on your purchase of a new retractable awning. With proper installation this awning will provide years
More informationContents. Awnings USA - Full Protective Hood Manual Instructions ft 11" - 11ft 6" Awnings
Awnings USA - Full Protective Hood Manual Instructions Contents Warning We recommend that two or more people are required to lift the awning into place. 4ft 11" - 11ft 6" Awnings 8 x Expansion bolts **
More informationSection B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1
Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe
More information2M801 Dual-Start ACME Threads
Dual-Start ACME Threads Ordering Guide for 1. 2. 3. 4. 5. 6. SERIES SHELL STYLE SERVICE CLASS SHELL SIZE-INSERT AGGMT CONTACTS KEYING -007-01 C 5-3 P A 1. SERIES Type Part # Description PLUG CRIMP PCB
More informationPrimrose Awnings Full Cassette Manual & Electric Instructions
Primrose Awnings Full Cassette Manual & Electric Instructions Contents for Full Cassette Awning 1 x Remote control receiver box 2 x Remote hand-held zappers 1 x 5 metre cable 1 x Template sticker **The
More information4.2 Assembly Instructions
4.2 Assembly Instructions 4.2.1 Assembly of Reserve Canopy. Assembly of Reserve Canopy using Rapide Links. After inspecting the Parachute and the Wings Harness/Container System, hang or lay the parachute
More informationAuxiliary 63.5l Fuel Tank Ford/Mazda Pick-up Truck 2012-Current READ ME! IMPORTANT WARNING!
Auxiliary 63.5l Fuel Tank Ford/Mazda Pick-up Truck 2012-Current ENG FTFM006 90 min READ ME! Thank you for purchasing a Front Runner Ford/Mazda Pick-Up Truck 2012 - Current Fuel Tank. Before you start,
More informationIMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS. Part # A7006
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS Part # A7006 Parts List Wobble Stopper Body Wobble Stopper Shaft Camper Bracket Lower Bracket Assembly Upper Bracket Upper Bracket Clamp 3/8 SAE Flat
More informationCrystal Compact Housing and Winter Kit
Crystal Compact Housing and Winter Kit Operating instructions Page 3 Installation instructions Page 6 To be kept in the vehicle! Sales and Service in UK and Eire: Truma (UK) Ltd. Truma House, Eastern Avenue,
More informationPARTS LIST MODEL M-1 - PIG
PARTS LIST MODEL M-1 - PIG FAN HOUSING ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 1090601 LABEL KIT - M-1 PIG 1 102 2590019 SWIVEL COUPLING ASSEMBLY - INCLUDES: 1 102A 2590111 HOSE COUPLING GASKET 1 103
More informationA A A T E C H N O L O G Y
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. H A R D W A R E C A T A L O G TOTAL SOLUTION SERVICE For the Industrial Piping Marketplace 2011 www.aaatech.com 4 0 Y E A R S S E R V I N G I N D U S T
More informationUrea/Adblue Hose Reel
www.scintex.com.au sales@scintex.com.au Model: SHR3408 Urea/Adblue Hose Reel Product Manual Specifications Spring driven drum: for automatic rewind. Locking ratchet: to maintain the desired length of hose
More informationTC36 COUNTRY HOME BURNER KIT INSTRUCTIONS (NATURAL GAS ONLY)
INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this manual for future reference. These instructions are supplementary to the Installation and Operating Instructions supplied with the
More informationDistinctive Characteristics
Distinctive Characteristics Base of heat resistant resin meets ULV-0 flammability rating. Maximized voltage capability of V allows use in medium source applications and increases operating life. Award-winning
More informationGates Hose Cutter Model 6-32 For six-wire spiral and two-wire braid hose through 2" I.D. Product Number: Clean Easy Cuts Safe Operation
Standard Hydraulic Hose Specialized Mining Couplings, Adapters and Accessories Specialized Mining Hose Product Information Gates Power Cutter 208 Product : 7480-6609 Effortless Straight Cuts Every Time
More information