SYKON. The joints are described with two letter. Specifically: PE = Press Corner Joint. TV = T-Joint EW = Corner Joint VE = Adjustable Corner Joint

Transcription

1

2 The atalogue is subdivided, in order to be simply to use, in produt groups. Eah group ontains profile, aessories and furnitures. The mentioned system profiles are extruded aording DIN and the alloy is Al Mg Si 0,5. The profiles an be provided in fixed lengths or request in speial length. All profiles, fittings and aessories have a ode number. When ordering you must take are the profile s length, olours and aessories. Aluminium profiles are supplied mill-finished, anodized or oloured. The joints are desribed with two letter. Speifially: NE = Pin Corner Joint PE = Press Corner Joint TV = T-Joint EW = Corner Joint VE = Adjustable Corner Joint All manuals are written, based on onstrutor s onveniene. For any logistial support please write to R&D department. PROFILCO 53th Km National Road Athens-Lamia Inofita-Viotia Phone: , Telefax: Internet: www. profilo.gr info@ profilo.gr SYKON GmbH & Co. KG Industriestraße Kirhlengern Phone:05223/ Telefax:05223/ Internet: info@sykon.de Wertstoffkreislauf A U F Aluminium und Umwelt im Fenster- und Fassadenbau

3 Faade 50 Skylight onstrution, Vertial and angular faade, Entrane roof, Glass fittings and Winter garden Faade 50 with graduated polyamide variable U f- Value Heat insulation DIN 4108, Part 4 SYKON R

4 Faade 50 Mullion Detail setion 1 Setion 1 7 /02 Sale 1:1

5 Faade 50 Mullion F.M.G. 1 Detail setion 1 F.M.G. = Frame Material Group Setion 1 Sale 1:1 7 /03

6 Faade 50 Corner mullion Detail setion 2 Setion Visible width: 168 Perimeter: 401 divided O.U.= Order Unit 2608 Round gasket blak O.U. = 100 m 7 /04 Sale 1:1

7 Faade 50 Transom Detail setion Alternative in vertial area: Transom oming from mullion profile Setion Sale 1:1 7 /05

8 Faade 50 Transom F.M.G. 1 Detail setion Alternative in vertial area: Transom oming from mullion profile Setion /06 Sale 1:1

9 Faade 50 Mullion Detail setion 1 Setion: 1a Sale 1:1 7 / 06-1

10 Faade 50 Transom Detail setion 5727 Visible width: 109 Perimeter: 503 T-joint: supportonnetor from Roller shutter system Glasgard Setion: / 06-2 Profile length and delivery time on request Sale 1:1

11 Faade 50 Lateral Connetion Detail setion 4 Setion 4 Sale 1:1 7 /07

12 Faade 50 Bottom Connetion Detail setion 5710 Visible width: Perimeter: Number and dimensioning onforming to statis demands Setion 5 7 /08 Sale 1:1

13 Faade 50 Top Connetion Detail setion 6 Setion 6 Sale 1:1 7 /09

14 Faade 50 Mullion profile 5702 Visible width: 187 Perimeter: 390 T-joint: 6844 (2252) 5700 Visible width: 27 Perimeter: Visible width: 247 Perimeter: 450 T-joint: 6845 (2252) 5704 Visible width: 307 Perimeter: 509 T-joint: 6846 (2252) 7 /10 Profile length 6 m Sale 1:1

15 Fassade Faade 50 Mullion profile 5706 Visible width: 447 Perimeter: 650 T-joint: 6848 (2252) 5705 Visible width: 367 Perimeter: 570 T-joint: 6847 (2252) Sale M 1:1 1:1 Profile length 6 m 7 /11

16 Faade 50 Transom profile 5718 Visible width: 458 Perimeter: Visible width: 76 Perimeter: Visible width: 106 Perimeter: 268 T-joint: 6849 (4265) Self tapping srew with torx similar DIN 7982-ST stainless steel O.U.= 100 piees Code Nr. Desription x x for transoms diret fixing in mullion for transoms fixing in T-joint Visible width: 146 Perimeter: 308 T-joint 6850 (4265) 5722 Visible width: 186 Perimeter: 348 T-joint: 6851 (4265) 7 /12 Profile length 6 m Sale 1:1

17 Faade 50 Transom profile 5723 Visible width: 246 Perimeter: 408 T-joint: 6852 (4265) 5724 Visible width: 306 Perimeter: 468 T-joint: 6853 (4265) 5725 Visible width: 366 Perimeter: 528 T-joint: 6854 (4265) Sale 1:1 Profile length 6 m 7 /13

18 Faade 50 Extension- and assembly mullion Detail setion 7 Setion 7 7 /14 Sale 1:1

19 Faade 50 Extension mullion 5734 Visible width: 151 Perimeter: Visible width: 121 Perimeter: Visible width: Perimeter: Visible width: Perimeter: Brush Colour: grey O.U.=20m 2611 Rebate gasket of EPDM Colour: blak O.U. = 100 m Sale 1:1 Profile length 6 m 7 /15

20 Faade 50 External orner Detail setion 8 Setion Visible width: Perimeter: Visible width: Perimeter: /16 Profile length 6 m Sale 1:1

21 Faade 50 Corner mullion Attahment profile Detail setion Visible width: 46 Perimeter: 580 Setion 9 Sale 1:1 Profile length 6 m 7 /17

22 Faade 50 Mullion Detail setion Glass gasket of EPDM, blak O.U.=50m Inlination up to Glass gasket of EPDM, blak O.U.=50m 4694 Glass gasket of EPDM, Colour: blak O.U. = 100 m Fae ap plate 6757 and 6760 see Catalogue Sykote Faade 60 Inlination up to 10 Setion 10 7 /18 Sale 1:1

23 Faade 50 Bottom roof leat Pyramid Detail setion 11 Setion 11 Sale 1:1,43 7 /19

24 Faade 50 Adjustable transom profile Detail setion 12 From 90 up to 180 Adjustable transom profile Setion Visible width: 90 Perimeter: 285 Visible width: 90 Perimeter: /20 Profile length 6 m Sale 1:1

25 Faade 50 Transom profile Detail setion Setion 13 Setion 14 Transom profile 5718 appliable up to mullion on rafter. Dimension max. 900 mm between enters. Sale1:1 7 /21

26 Faade 50 Rafter Detail setion Bending up to 25 Visible width: 27 Perimeter: Bending over 25 Visible width: 27 Perimeter: The profile 5700 it will be bent and under or delivered. By Order (other) orner given. Inlination 0upto15 Over 10 inlination or glass width 28 mm polyamide ledge 5627 must be ut Fae ap plate 6757 and 6760 see Catalogue Sykote Faade 60 Setion 15 7 /22 Profile length 6 m Sale 1:1

27 Faade 50 Rafter Detail setion 5751 Visible width: 82 Perimeter: Glass gasket of EPDM Colour: blak O.U. = 100 m 4695 up to 25 over o Inlination 10 upto30 With glazing 28 mm polyamide ledge trimmed Setion 16 Sale 1:1 Profile length 6 m 7 /23

28 Faade 50 Internal orner Angle rafter Detail setion Bending 20 Visible width: 8 Perimeter: 282 Pressure profile punhed, Hole distane 250 mm 5711 Bending 20 Visible width: 35 Perimeter: Bending 15 up to 25 Visible width: 35 Perimeter: The profile 5711 it will be under with modified angle 15 up to 25 delivered. By order angle must be given. Inlination 15 upto25 Setion 17 7 /24 Profile length 6 m Sale 1:1

29 Faade 50 Internal orner Detail setion 18 Inlination 15 upto25 Setion 18 Sale 1:1 7 /25

30 Faade 50 Mullion profile Detail setion 4786 Visible width: 89 Perimeter: /26 Profile length 6 m Sale 1:1

31 Faade 50 Transom profile Detail setion Form utter for transom ending 0785 Lifting bolts fortransom ending O.U. =10piees 4810 Drill devie mullion proessing/ lifting bolts 4803 Drill devie for T- onnetion, transom drilling For transomonfiguration on profile 4786 Glass weight up to 25 kg F Sink- Philips srew DIN 7982, form F O.U. = 100 piees Glass weight over 25 kg Cyl.- Allen srew O.U. = 100 piees 4790 Visible width: 214 Perimeter: 377 Sale 1:1 Profile length 6 m 7 /27

32 Faade 50 Mullion profile 4704 Visible width: 303 Perimeter: / 27-1 Profile length 6 m Sale 1:1

33 Faade 50 Fae ap Pressure plate 3758 Visible width: 70 Perimeter: Visible width: 58 Perimeter: 139 Visible width: 76 Perimeter: 190 Visible width: 90 Perimeter: 207 Visible width: 108 Perimeter: Visible width: 60 Perimeter: Visible width: 67 Perimeter: Visible width: 50 Perimeter: Visible width: 50 Perimeter: Perimeter: 158 Pressure plate punhed Hole distane 250 mm Perimeter: 187 Pressure plate punhed, Hole distane 250 mm 3766 Visible width: 161 Perimeter: 348 Profile 3766 edge apable 2550 Syntheti plug holder 4 piees/m groove O.U. = 100 piees 6545 Closing ap for fae ap 3758 Colour: blak O.U. = 1 piee Sale 1:1 Profile length 6 m 7 /28

34 Faade 50 Fae ap 4780 Visible width: 150 Perimeter: Visible width: 108 Perimeter: Visible width: 14 Perimeter: / 28-1 Profile length 6 m Sale 1:1

35 Faade 50 Insulating ledge Glass gasket Sealing tape 3612 Syntheti Insulating ledge blak O.U.=6m 5627 Syntheti Insulating ledge blak O.U.=6m 4616 Syntheti-Insulating ledge blak O.U.=6m Outside Outside Inside Glass gasket Glass gasket Glass gasket of EPDM of EPDM for transom profile Colour: blak Colour: blak , O.U. = 100 m O.U. = 100 m of EPDM Colour: blak O.U.= 100 m Inside 4674 Glass gasket for mullion profile , of EPDM Colour: blak O.U. = 100 m Inside 4679 Glass gasket for transom profile , of EPDM Colour: blak O.U. = 100 m Inside 4680 Glass gasket for mullion profile , of EPDM Colour: blak O.U. = 100 m Outside 0815 Butyl sealing tape aluminium laminated for the overlapping Glass fold over 45x1mm O.U.=28m Inside 3696 Glass gasket of EPDM Colour: blak O.U. = 100 m Inside 4697 Glass gasket of EPDM Colour: blak O.U. = 100 m Inside 4698 Glass gasket of EPDM Colour: blak O.U. = 100 m 0819 like previous 50x1mm O.U.=28m 0820 like previous 60 x 1.2 mm O.U.=25m 0260 PVC- Retangle tube length 6 m, Colour: blak O.U. = 1 piee 0821 like previous 90 x 1.2 mm O.U.=25m Seal piee Gasket 50 mm long for transom seating Colour: blak O.U. = 100 piees of EPDM for seal piee (for) transom seating Colour: blak O.U.=10m 6544 Proof plate Colour: blak O.U. = 10 piees Sale 1:1 Hint: EPDM - gaskets in Standard quality are not ompatible for aryli glass 7 /29

36 Faade 50 Insulating ledge Glass gasket Aessories 4695 (4696) 4680 Mullion 4695 (4696) 4679 Transom (4696) 4674 Mullion 4695 (4696) 4673 Transom (4695) 4680 Mullion 4696 (4695) 4679 Transom Thrust bolt Cylinder-Allen srew SW x... stainless steel and attahed syntheti-washer 3558 O.U. = 100 piees 3558 Synth.-washer As base for fixing srews 5.5 O.U. = 100 piees Glass support for hang up in the mullion or in transom profile O.U. = 10 piees Synth. Ins. ledge Dimension Mullion fold width Transom fold width Mullion trust bolt Glass support forhangupinmullion Transom trust bolt Glass support forhangupintransom Filling thikness Glass gsk. outside: 4695 Inside: 4673/4674 Filling thikness Glass gsk. outside: 4696 Inside: 4673/4674 Filling thikness Glass gsk. outside: 4695 Inside: 4679/4680 Filling thikness Glass gsk. outside: 4696 Inside: 4679/ mm 27 mm 34 mm 30 mm 43 mm 50 mm 23 mm 36 mm 43 mm x38 5.5x50 5.5x x30 5.5x46 5.5x mm 30 mm 37 mm 15 mm 28 mm 35 mm (14) (27) (34) 11 mm 24 mm 31 mm 8mm 21mm 28 mm (9) (22) (29) 7 /30 Hint: EPDM - gaskets in Standard quality are not ompatible for aryli glass Sale 1:1

37 Faade 50 Insulating ledge Glass gasket Aessories 4695 (4696) 3696 Mullion profile also as transom Only in vertialarea appliable (4696) (4696) (4696) (4695) Thrust bolt Cylinder Allen srews SW x... Stainless steel and attahed syntheti washer 3558 O.U. = 100 piees 3558 Syntheti Washer as base for fixing srews 5.5 O.U. = 100 piees Glass support For hang up in the Profile (Mullion ontour) O.U. = 10 piees Synth. Ins. Ledge Dimension Mullion fold width Transom fold width Trust bolt for mullion profile Glass support Forhangupinprofile ( mullion ontour) Filling thikness gsk. outside: 4695(4696) Glass gsk. Inside: 3696 Filling thikness gsk. outside: 4695 (4696) Glass gsk.. Inside: 4697 Filling thikness gsk. outside: 4695 (4696) Glass gsk. Inside: 4698 Filling thikness gsk. outside:: 4695 (4696) Glass gsk. Inside: 4699 Filling thikness gsk. outside: 4695 (4696) Glass gsk. Inside: 4674 Filling thikness gsk. outside: 4695 (4696) Glass gasket. Inside: mm 27 mm 34 mm 30 mm 43 mm 50 mm 30 mm 43 mm 50 mm x38 5.5x50 5.5x (22) mm (21) 22(20) mm (19) 20(18) mm (17) 18(16) mm (15) 17(15) mm (14) 11(9) mm (8) 37(35) mm (34) 35(33) mm (32) 33(31) mm (30) 31(29) mm (28) 30(28) mm (27) 24(22) mm (21) 44(42) mm (41) 42(40) mm (39) 40(38) mm (37) 38(36) mm (35) 37(35) mm (34) 31(29) mm (28) Sale 1:1 Hint: EPDM gaskets in Standard quality are not ompatible for aryli glass. 7 /31

38 Faade 50 Mullion Transom Detail setion Setion 22 Setion 21 7 /32 Sale 1:1

39 Faade 50 Sun roof Joint profile 5518 Fixing bolts for Sun roof for over profile 3758, 3759, 3765, 4759 and 4799 oupling with fixing material, of stainless steel O.U. = 1 piee Hint: Number and dimensioning of fixing bolts depending on statis demands of Sun roof speifiations and on onstrutor s opinion Fixing bolts for Sun roof for over profie 3760, 4758, 4776 and 4779 oupling with fixing material, of stainless steel O.U. = 1 piee 2252 T-joint profile for mullion 5702, 5703, M T-joint profile for transom 5720, 5721, T-joint profile for mullion 5702, 5703, Self tapping srew with torx similar DIN 7982-ST stainless steel O.U.= 100 piees Code Nr. Desription x x for transoms diret fixing in mullion for transoms fixing in T-joint. Sale 1:1 Profile length 6 m 7 /33

40 Fassade Faade 50 Joint profile I x = m I = m y Grooved pin 8x45mm for angular joint from profile 2234 and 2235 O.U. = 10 piees /34 Profile length 6 m Sale M 1:1 1:1

41 Faade 50 Connetor reinfored profile, aessories 4275 Visible width: Perimeter: Fixing bolt Hexagon head srew M 10 x 70, self-loking hexagon nut M 10, washer B 10,5 and spaer sleeve of aluminium O.U. = 10 piees 4586 Fold filling piee for applying to transom profile O.U. = 10 piees Fold filling piee Transom profile blunt utted O.U. = 10 piees 6882 Splie plate for profile attahment Vertial O.U. = 10 piees Sale 1:1 7 /35

42 Faade 50 Glass house Gutter Setion detail 23 ut Setion 23 7 /36 Sale 1:2

43 Faade 50 Glass house Gutter profile Cover Cover Cover for Rone profile 4727 LS/RS usable, raw / rude O.U. = 1 piee for Rone profile 4727 LS/RS usable, white oated O.U. = 1 piee Profile 4727 Inside Visible width: 459 Perimeter: 1119 T-joint Pin for T-joint: Drill devie for T-joint.: Gutter joint Profile Outside Profile I x = m 4 I = m y 6883 Gutter splie joint omplete for gutter and 2 hambers 6884 Gutter splie joint omplete for 90 gutter and 2 hambers Sale 1:1 Profile length 6 m 7 /37

44 Faade 50 Gutter joint Steel reinforement 0220 F lat steel 90x12, hot dip galvanized, a.6mlong O.U. =1piee I x = 72.9 m I = 12.9 m y St eel tube 100x30x4, hot tip galvanized, a.6mlong O.U. =1piee I x =106.4 m I = 14.3 m y I x = m I = m y 4 4 Joint profile for gutter 4727, /38 Profile length 6 m Sale 1:1

45 Faade 50 Gutter profile Cover Support tube Cover Visible width: 250 Perimeter: I x = m 4 I = m y Perimeter: 215 Assembling on frames: tapping hole M6 or throughhole with ounterbore 5570 Cover for gutter profile 4777 LS/RS usable, raw / rude O.U. = 1 piee Cover like previous, but white Insulation 6831 Gutter holder O.U. = 1 piee 3133 Visible width: 273 Perimeter: I x = 41.1 m 4 I = 41.1 m y Sale 1:1 Profile length 6 m 7 /39

46 Faade 50 Glass house Side element Detail setion Setion 25 Setion 24 Pay attention at spae demand for aessories 7 /40 Profile length 6 m Sale 1:1

47 Faade 50 Rafters Joint profile Reinforement profile 4725 Visible width: 146 Perimeter: 567 VE = Visible width: 247 Perimeter: Visible width: 50 Perimeter: 151 T-joint for onnet on gutter 4727 Rafters Roofinlination T-joint 3139 Visible width: 120 Perimeter: 325 I x = m I = m y up to upto Faade up to upto Visible width: 307 Perimeter: Steel tube, galvanized, a. 6 m long, 50x35x2 4 I X= 11,1 m 4 I y = 6,3 m 2611 Sash gasket of EPDM olour: blak O.U. = 100 m Sale 1:1 Profile length 6 m 7 /41

48 Fassade Faade Glass house Wall onnetion Detail setion 26 Setion 26 Cut 7 /42 Sale M 1:1 1:1

49 Faade 50 Ridge onnetion Aessories 4715 Visible width: 86 Perimeter: Visible width: 75 Perimeter: Visible width: 61 Perimeter: Proessing: (mm) Output: 53 Cirumferential: Round gasket of EPDM olour: blak O.U. = 100 m Lens-srew 5.5 x 45 with Torx, TX 25 similar DIN 7981-ST stainless steel O.U.=100 piees 3558 Synth.-washer as base for trust bolt 5.5 O.U. = 100 piees Visible width: 118 Perimeter: 442 Visible width: Perimeter: Cover for profile 4712/4713 LS/RS usable, raw / rude O.U. = 1 piee EV1 anodized, white and RAL hoie oated available Closing ap for pressure plate and over fae ap 3758, dark anodized O.U. = 1 piee EV1 anodized, white and RAL hoie oated available Fold onneting over for rafter profile, raw / rude O.U. = 1 piee 2138 Visible width: 24 Perimeter: 70 Sale 1:1 Profile length 6 m 7 /43

50 Faade 50 Glass house External orner Detail setion 27 Setion 27 7 /44 Sale 1:1

51 Faade 50 Equipment Tools 3806 Drill with depth gauge Ö 8 x 4.3 mm for T-joint profile 5718, 5719, O.U. = 1 piee like previous Ö 8,6 x 4.3 mm for T-joint rafters onnetion Glass house MARIE 0859 Hexagon wrenh key Hexagon soket for srews with (Allen) SW 5 mm, for O.U. = 1 Piee 4801 Punh press 0864 Hexagon wrenh key for T-joint, transom punh profile 5718, 5719, O.U. = 1 piee for Srews with TORX- drive TX 20, for O.U. =1piee 4802 Drilling plate for T-joints transom on mullion mullion on mullion O.U. = 1 piee 0867 Hexagon wrenh key for Srews with TORX- drive TX 25, for O.U. =1piee 4803 Drilling plate for T-joint, transom profile O.U. = 1 piee Drilling plate for T- joint, mullion profile as transom 0869 Angular- Srewdriver with spherial head, thigh length 165 x 25 mm, for Allen srews SW 5 on rafters joint O.U. = 1 piee 4807 Drilling plate for T-joint transom profile assembly on profile 5702, 5703, O.U. = 1 piee 2890 Soket wrenh for hexagon head srew SW 8 O.U. =1piee 4808 Drilling plate for T- joint Transom profile assembly on profile 5740 and 5741 O.U. = 1 piee Profile onfiguration R5 for transom assembly on mullion 4786, tipped, Ö180, ut width 11 mm, R 5 mm, hole Ö 40mm,Z18,for milling mahine with mehanial feed. O.U. =1piee 7 /45

52 Faade 50 Srews Aessories Lens srews DIN 7981-ST stainless steel O.U. = 100 piees Self tapping srews DIN 7982-ST stainless steel O.U. = 100 piees Self tapping srews, with Torx, similar DIN 7982-ST stainless steel O.U. = 100 piees Code Nr. Desription Code Nr. Desription Code Nr. Desription x 38 * x x x x x x F x x x x x x 55 * Head shape of srew x 19 Torx TX x 45 Torx TX x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 45 Srew and syntheti Cap stainless steel O.U. = 100 piees Code Nr. Desription Lens srew DIN 7983-ST stainless steel O.U. = 100 piees Code Nr. Desription x x x x 32 Self drilling srew sink head DIN 7504 stainless steel O.U. = 100 piees Code Nr. Desription x x 25 Synth. Cap white x x x x 45 Synth. Cap blak x x x x 45 Sink srew DIN 965 stainless steel O.U. = 100 piees Code Nr. Desription M4x M4x M5x M5x M5x M5x M5x25 Lens-Sink srew and tip stainless steel O.U. = 100 piees Code Nr. Desription 0733 M5x14 Sink srew self threading 0788 M5x14 Hexagon nut DIN 934 stainless steel O.U. = 100 piees Code Nr. Desription 0751 M 5 Draw in nut point Steel admied, O.U. = 100 piees Code Nr. Desription 0777 M M M mm mm 2-3 mm Cylinder Allen srew DIN 6912 stainless steel O.U. = 100 piees Code Nr. Desription Washer DIN 125, Form B Stainless steel O.U. = 100 piees Code Nr. Desription from rivet on aluminium O.U. = 100 piees M5x M6x M8x Code Nr o 3 x 5 Desription 7 /46 The self threading srews are onforming to the DIN with tip = Form C, Srews with pivot = Form F are espeially registrated

53

54 Adhesive Cleaner Aessories 0804 Glue for gaskets Content 20 g O.U. = 1 piee 0807 Adhesive tape to protet the surfae of profiles Roll width 50 mm, Length 100 m O.U. = 1 piee 0808 Anodizing leaner for leaning and are of anodized profile Content 100 ml O.U. = 1 piee 0812 Glue for gasket in tube Tube ontent 170 g O.U. = 1 piee 0813 Slot Shleiffix leaner for Zum leaning Reinigen anodized vershmutzter surfaes O.U. Eloxalflähen = 1 piee BE = 1 Stük 0822 Glue for metals for olour oated and anodized profile, beam rigid at old on two omponents basis (Epoxyd resin). Proessing with Portioning tool 3812, Mixing up O.U. = 2 artridge eah 1500 g 0823 Glue for srews Medium tight, quik hardering Bottle with 10 ml ontent O.U. = 1 piee 0831 Intensive leaner for olour oated, unpainted and anodized profile, of natural lemon peel extrat Content 10 Lt O.U. = 1 piee 0833 Glue for metals for olour oated, unpainted and anodized profile, beam rigid at old from two omponents basis (Epoxyd resin). Proessing with Portioning pistol 3808, Mixing up O.U. = 460 g (310 ml) 0834 Colored paste for Metal glue 0822, 0832 and 0833 PE-bottle with 50 ml ontents: olour white, olour blak ( olour bl ue, r ed, yellow on request available) O.U. =1piee 7 /48

55 Adhesive Cleaner Aesories 0824 Building sealing foil Building sealing foil Building sealing foil Material EPDM, Width 250 mm, thikness 1.00 mm, Roll length 20 m, Colour: blak O.U. = 1 piee like previous, but 300 mm width O.U. = 1 piee like previous, but 500 mm width O.U. = 1 piee Building sealing foil with gasket leg suitable for onneting profile Building sealing foil with gasket leg like previous, but 250 mm width Building sealing foil with gasket leg like previous, but 350 mm width Material EPDM, width 150 mm, Thikness 0,75 mm, length 20 m, Colour: blak O.U. = 1 piee O.U. = 1 piee O.U. = 1 piee 0825 Cleaner For pre treatment of ontat surfaes, also as dilator of adhesive 0826, Bottle ontent 1 Liter O.U. = 1 piee 0826 Adhesive In order to glue the building sealing foil in dry and without just surfae buket ontent 4.7 kg O.U. = 1 piee Adhesive like previous, but Dose ontent 0.8 kg O.U. = 1 piee Color stik like previous, but EV1 O.U.= 1 piee 0809 Pakage material Self adhesive, in stripes of1000x75x2mm O.U. = 10 piees Marker Corretion of surfaes srathes Colour: white O.U. = 1 Piee Color stik like previous, but dark bronze O.U. = 1 piee Color stik like previous, but in RAL olour hoie O.U. = 1 piee 7 /49

56 Fassade Faade 50 Mullion Stati Values S y Profile-Nr. Profil-Nr. 4 J x = m 4 J y = m 3 W x = m 3 W y = m S = m x S = m y S x /50

57 Fassade Faade 50 Transom Stati Values S y Profile-Nr. Profil-Nr. S x 4 J x = m 4 J y = m 3 W x = m 3 W y = m S = m x S = m y /51

58 Faade 50 Profile Stati Values S y Profile-Nr. 4 J x = m 4 J y = m 3 W x = m 3 W y = m S = m x S = m y S x /52

59 Faade x35x Sale 1:3 7 /53

60 Faade 50 Order number index Order number Catalogue page Order number Catalogue page Order number Catalogue page Order number Catalogue page 7 /54