The compact markilux cassette awning - small, practical and functional

Size: px

Start display at page:

Download "The compact markilux cassette awning - small, practical and functional"

Gwenda Shanna Burke
5 years ago
Views:

1 safe timeless beautiful The compact markilux cassette awning - small, practical and functional HÖCHSTE SICHERHEIT 115

2 The compact markilux cassette awning - small, practical and functional design features technical highlights Appealing overall appearance thanks to the torque bar-free construction and especially compact cassette, 125 mm in height Created by renowned designers. The special cassette shape surrounds the roller tube even when the awning is extended so lending an overall harmonious appearance. for long-lasting attractiveness the awning has been powder coated. awning covers made from acrylic yarns or sunsilk SNC with self-cleaning effect. When the awning is closed the folding arms are protected behind the front profile. Front profile with integrated gutter and hidden water drainage spouts. The 85 mm roller tube ensures the highest rigidity and the best possible cover winding characteristics even at the largest widths. Folding arms with perfected power transference by means of a round, steel-link chain. Folding arms with drop-forged aluminium moving components and Teflon-coated bronze bushes, which provide superior stability and longevity. optional accessories In the case of manual operation ease of use is ensured with the springassisted gearbox. Hard-wired motor drive (optionally with automatic controls) for simple, relaxed operation. Radio-controlled motor with handheld transmitter for ease of operation - and ergonomically crafted for ease of use. An easily connected radio-controlled sun and wind sensor guarantees comfort and protection even during your absence. Wall sealing profile to cover the gap between awning and wall. The panel joints of the awning cover are ultrasonically bonded to give a better appearance without bothersome stitching Manual operation includes a markilux stainless steel winding handle - quality to get to grips with The greater upper to lower arm length ratio ensures high lateral stability in the awning The use of cam bolts makes fine-tuning of the folding arms a simple procedure Awning available in non-standard RAL colours Available with a valance 116

3 Folding-arm cassette awning pitch adjustment in the case of face fixture from 5 to 35, in the case of top/eaves fixture from 5 to 70 with wall sealing profile (optional) Top fixture side view at a pitch of 35 Face fixture side view showing gearbox eye for manual operation (standard) folding arm with round, steel-link chain sectional view side view during extension Standard RAL colours: standard: optional accessories:

safe timeless beautiful Lounge frame colours Nano

5215 Nano anthracite metallic 5204 End cap insert colours

The compact markilux cassette awning - small, practical

4 safe timeless beautiful Lounge frame colours Nano off-white textured finish 5233 Nano stone grey metallic 5215 Nano anthracite metallic 5204 End cap insert colours Nano off-white textured finish 5233 Nano stone grey metallic 5215 Nano anthracite metallic 5204 Polished chrome The compact markilux cassette awning - small, practical and functional

5 dimensions and configuration options Overall blind width minimum width motor ¹⁰) minimum width manual operation ¹⁰ extension Standard Bespoke arms Standard Bespoke arms ²⁸) ²⁸) ²⁸) ²⁸) = available, 2 folding arms 10) the dimensions are only valid for fixture without spreader plates (2 folding arms). 28) Please note the minimum widths! Due to the compact awning construction and depending on the width and the arm length, contact between cover and folding arms may occur during extension and retraction. This does not affect the functionality or longevity of the awning. dimensions in cm configuration options operation type Shadeplus Lighting covers manual operation with st. steel winding handle Servo-assisted operation radio-controlled motor motor manual operation radio-controlled motor motor Halogen Spotlights Fluorescent lighting acrylic 34 (fabric series 341xx-347xx) sunsilk SNC (fabric series 324xx/329xx) signature (fabric series 369xx) transilk FR (fabric series 319xx) transolair (fabric series 339xx) widely woven acrylic (fabric series 349xx) perla FR (fabric series 374xx/379xx) Soltis 92 PVC fabric miscellaneous Coverboard Sytem coverboard wall sealing profile Pitch adjustment gear Insertable side blind sun and wind sensor Valance Infrared heater Vibrabox / Sunis sun sensor Coupled units (please refer to fixture) coupled unit 2 fields coupled unit 3 fields junction roller one-piece cover (on request) ³ Definition of extension: The extension is measured with the awning extended at a pitch of approx. 15 from the wall over the cover to the leading edge of the front profile. The extension tolerance is - 40mm / + 40mm In the case of manual operation, assume approx. 16 winding handle revolutions per metre of awning extension. Extension when using a motor takes approximately 12 seconds per metre. Coupled folding-arm awnings are not available. frame colours RAL 9016 traffic white RAL 8019 grey brown RAL 9006 metallic aluminium 5204 Nano anthracite metallic 5204 (Lounge) 5215 Nano stone grey metallic 5215 (Lounge) 5233 Nano off-white textured finish (Lounge) non-standard RAL colour = fitted as standard = optional accessory = not available ³ = wall sealilng profile effective up to an awning pitch of 35 ² = valance shape 1 (please refer to the section "Fabric Collection") 119

6 fixings and accessories 150 Face/Top fixture bracket Spacer plate face/ top fixture reducing bolt assembly M 16 - M 12 / SW mm x150x20mm N.B! stack to a max. of 200 mm mm length (please refer to "Technical Information") stand-off strip for wall sealing profile available by the metre Fixture example, see face fixture with wall sealing profile Spacer plate face/ top fixture 136x150x12mm reducing bolt assembly M 10 - M 10 / SW 27 50mm length (please refer to "Technical Information") Eaves fixture bracket Cover plate for external insulation reducing bolt assembly M 12 - M 10 / SW mm x190x2mm mm length (please refer to "Technical Information") Eaves fixture bracket assembly Component assembly spreader plate B reducing bolt assembly M 16 - M 10 / SW mm x400x12mm mm length (please refer to "Technical Information") Angle and fixture plate for eaves fixture Face fixture bracket 300mm "left" machine finish Spreader plate B (incl. bracket bolts) 160x430x12mm Face fixture bracket 300mm "right" Additional eaves fixture plate Angled profile for eaves fixtures 60x260x12mm 100x100mm available by the metre, undrilled = Please insert the RAL No. (please refer to the section on "Coatings") 120

7 Face fixture Pull-out force [N=Newton] per fixture point according to EN 13561, wind resistance class 2 compression-proof substrate non compression-proof substrate The pull-out force refers to the vertical centre to centre measurement between the fixture points of 90 mm. If this measurement is reduced, the pull-out force increases by 14% in the case of compression-proof substrates and by 19% in the case of non-compression-proof substrates. H = extension FB = pull-out force per fixing point HT BHT = bracket quantity width BM = no. of fixing points WA = wall sealing profile 121

8 Face fixture with spreader plate A Pull-out force [N=Newton] per fixture point according to EN 13561, wind resistance class 2 compression-proof substrate non compression-proof substrate The pull-out force refers to the vertical centre to centre measurement between the fixture points of 76 mm. In the case of spreader plates a washer conforming to DIN 9021 must be used. H = extension FB = pull-out force per fixing point HT BHT = bracket quantity width BP = no. of spreader plates BM = no. of fixing points 122

9 Face fixture with spreader plate B Pull-out force [N=Newton] per fixture point according to EN 13561, wind resistance class 2 compression-proof substrate non compression-proof substrate The pull-out force refers to the vertical centre to centre measurement between the fixture points of 350 mm. In the case of spreader plates a washer conforming to DIN 9021 must be used. H = extension FB = pull-out force per fixing point HT BHT = bracket quantity width BP = no. of spreader plates BM = no. of fixing points 123

10 Top fixture Pull-out force [N=Newton] per fixture point according to EN 13561, wind resistance class 2 compression-proof substrate non compression-proof substrate The pull-out force refers to the horizontal centre to centre measurement between the fixture points of 80 mm. H = extension FB = pull-out force per fixing point HT BHT = bracket quantity width BM = no. of fixing points At a pitch of more than 46 an area at least 60 cm deep must be available behind the awning in the case of manual operation from the rear. There is no limitation in the case of motor operation. 124

Eaves/Roof timber fixture Pull-out force [N=Newton] for the fixture bracket next

shear force are calculated from 2 fixture points per bracket, because depending

used. H = extension Md = torque value for the bracket next to the arm FS = shear

of fixing points At a pitch of more than 46 an area at least 60 cm deep must be

11 Eaves/Roof timber fixture Pull-out force [N=Newton] for the fixture bracket next to the arm according to EN 13561, wind resistance class 2 Torque shear force The shear force are calculated from 2 fixture points per bracket, because depending on the roof pitch it cannot be guaranteed that 4 fixture points per bracket can used. H = extension Md = torque value for the bracket next to the arm FS = shear force HT = bracket BM = no. of fixing points At a pitch of more than 46 an area at least 60 cm deep must be available behind the awning in the case of manual operation from the rear. There is no limitation in the case of motor operation. 125

12 Eaves fixture with additional plate Pull-out force [N=Newton] for the fixture bracket next to the arm according to EN 13561, wind resistance class 2 Torque shear force By using the additional flat plate, the shear force is reduced in comparison with conventional eaves fixture. H = extension Md = torque value for the bracket next to the arm FS = shear force HT = bracket BM = no. of fixing points At a pitch of more than 46 an area at least 60 cm deep must be available behind the awning in the case of manual operation from the rear. There is no limitation in the case of motor operation. 126

13 Bracket range for awnings with 2 folding arms dimensions in cm HT = bracket MB = range for bracket fixture 127

markilux 990 the compact markilux cassette awning slender, practical, functional PATIO AND BALCONY AWNINGS safe timeless beautiful

markilux 990 the compact markilux cassette awning slender, practical, functional PATIO AND BALCONY AWNINGS safe timeless beautiful PATIO AND BALCONY AWNINGS safe timeless beautiful rated to wind resistance class 2 (corresponds to Beaufort 5) the compact markilux cassette awning slender, practical, functional www.markilux.com markilux