C11.15 HANDLES AND LOCKCASES C11 SIDE HUNG WINDOWS

Save this PDF as:

WORD PNG TXT JPG

Size: px

Start display at page:

Download "C11.15 HANDLES AND LOCKCASES C11 SIDE HUNG WINDOWS"

Julianna Benson
11 months ago
Views:

Transcription

C11 SIDE HUNG WINDOWS C11.15 HANDLES AND LOCKCASES 01.05.

1 C11 SIDE HUNG WINDOWS C11.15 HANDLES AND LOCKCASES Waregemstraat Zulte - Belgium - T F

2 CONTENTS 1. Handles in combination with lockcase... C Lockcase (for handles without base) C Lockcase (for handles with base) C Handles in combination with connection piece set...c Connection piece set n C Connection piece set n (Chrono Safe) C Standard handles C Handles with cylinder (CYL version) C Fireman s axe handle (V version) and loose grip C Handles with key (W version) C Handles with long fork C Standard and S handle C Handle preparations C Options C C

3 1. Handles in combination with lockcase 1.1. Lockcase (for handles without base) C General Profile dimensions Lockcases n and can be used with the handles without base n (CYL). See page C The lockcases are made entirely of non-corroding materials. The installation is only possible for vents over 685 mm high Lockcase n and The set n consists of a lockcase n and a limitation piece n The set n for Chrono Safe consists of a lockcase n , a limitation piece n and a thickness piece n N N (Chrono Safe) Set n clips for 90 limitation lockcase Set n clips for 90 limitation thickness piece lockcase C

4 Assembly 1 Right Left 2 Connection with Chrono rods Click the limitation piece on the lockcase. The piece must be clipped at the position L or R, depending on a left (L) hand or right (R) hand window. Tilt the lockcase behind the last tooth of the profile Mount the base with the 2 screws included in the set. Check the direction. Lockcase in 90 position Lockcase in 0 position 5 6 Fasten the handle without base. Check after clicking if the handles are fixed. C

5 Milling 1st milling 2nd milling L=21.5 mm C=16 mm L=22 mm C=16.5 mm Minimum 5,5 mm deep With width B + 1 mm at distance 5,5 mm Disassembly 1 Turn the handle in horizontal position (90 ). 2 Press with a small tool in the cavity. C

1.1.6. Handles in combination with 26000-720 or 26300-720 Handle n 30000-670 Handle n 30000-670 can be used next to the Horizon door handles with the advantage of having the same appearance.

6 Handles in combination with or Handle n Handle n can be used next to the Horizon door handles with the advantage of having the same appearance. To use in combination with: Chrono lockcase n : see page C for turn-tilt, tilt-turn, side hung open in as well as for tilt windows. Finish: grip in aluminium and base in zinc alloy, always polyester powder coated in more than 450 RAL colours. Handle n Handle n can be used next to the Horizon door handles with the advantage of having the same appearance. To use in combination with: Chrono lockcase n : see page C for turn-tilt, tilt-turn, side hung open in as well as for tilt windows. Finish: grip in aluminium and base in zinc alloy, grip anodised or grip and base polyester powder coated in more than 450 RAL colours. Handle with cylinder without free run n CYL Handle n CYL can be used next to the Horizon door handles with the advantage of having the same appearance. The high security system Chrono Safe must always be operated by cylinder locking handles n CYL. The cylinder locking handle can be locked in closed position. To use in combination with: Chrono lockcase n : see page C Chrono Safe lockcase n : see page C for turn-tilt, tilt-turn, side hung open in as well as for tilt windows. Finish: grip in aluminium and base in zinc alloy, grip anodised or grip and base polyester powder coated in more than 450 RAL colours. C

Covers n 30000-670-3 and 30000-670-4 Covers to click on the base to protect the windows during transport. Suitable for each handle without base.

7 Covers n and Covers to click on the base to protect the windows during transport. Suitable for each handle without base. The cover can be removed by turning it with a screwdriver. Versions: N : standard version in black synthetic material N : coated version in synthetic material 1.2. Lockcase (for handles with base) General Profile dimensions Lockcases n and can be used by a handle with square spindle of 7 mm. The lockcases can be operated by the Sobinox and Horizon handles. The lockcases are made entirely of non-corroding materials. The installation is only possible for vents over 685 mm high Lockcase n and The set n consists of a lockcase n and a limitation piece n The set n for Chrono Safe consists of a lockcase n , a limitation piece n and a thickness piece n N N (Chrono Safe) Set n clips for 90 limitation lockcase Set n clips for 90 limitation thickness piece lockcase C

8 Assembly and milling 1 2 Right Left One milling up to depth A + 1mm Click the limitation piece on the lockcase. Depending on a left (L) hand or right (R) hand window the piece must be clipped at the position L or R. L = 22 > B = 16 L = 21.5 > B = 15.5 Connection with Chrono rods 3 4 a) Press the clamping plate and the lockcase together. b) Tilt the lockcase behind the last tooth of the profile. c) Release the clamping plate. The locking rollers at front side are clicking into the holes. (1) Not included C

9 Handles in combination with or Horizon handles Handle n can be used next to the Horizon door handles with the advantage of having the same appearance. To use in combination with: Chrono lockcase n : see page C for turn-tilt, tilt-turn, side hung open in as well as for tilt windows. Finish: grip and base in aluminium, anodised or polyester powder coated in more than 450 RAL colours. N C

10 Sobinox handles General The Sobinox handles are manufactured from high-grade stainless steel AISI 304 and are supplied with a satin finish. These door handles can be used in many different sectors due to their aesthetic, practical, maintenance friendly and hygienic properties: e.g. private houses, hospitals, catering, industry,.... The grips are available in different types and can be supplied with an oval or rectangular short backplate. The window handles are supplied with a steel zinc plated square spindle of 7 mm. Available in lengths of 25 and 38 mm. Window handles with cylinder (1852CYL and 1857CYL) are also available. When ordering please add CYL at the order code. When ordering handles n 1854 and 1859 please indicate the quantity of left hand and right hand handles. The following stainless steel window handles are also available in an aluminium version (AL). Finish aluminium version: anodised or polyester powder coated in more than 450 RAL colours. 1850AL 1852AL 1855AL 1857AL To be used in combination with: Chrono lockcase n : see page C Chrono Safe lockcase n : see page C for turn-tilt, tilt-turn, side hung open in as well as for tilt windows. Maintenance instructions Maintenance should be carried out at suitable intervals to prevent surface corrosion and for reasons of hygiene. Normal maintenance: Clean the stainless steel parts regularly. Treat the surface with soapy water or with a mild detergent. Rinse of the detergent with clean water. Polish with a soft cloth or sponge. Never use: Scouring powders. Steel wool or steel brushes. Highly abrasive materials. Fixing backplate with cover C

Handles with oval backplate n 1850(AL)-25 n 1851-25 n 1850(AL)-38 n 1851-38 n 1852(AL)-25 n 1752-25 n 1852(AL)-38 n 1752-38 n 1852CYL-25 n 1852CYL-38 n 1853-25 n 1854-25 n 1853-38 n 1854-38 Right =

11 Handles with oval backplate n 1850(AL)-25 n n 1850(AL)-38 n n 1852(AL)-25 n n 1852(AL)-38 n n 1852CYL-25 n 1852CYL-38 n n n n Right = illustrated Left = opposite view Handles n 1852CYL-25 and 1852CYL-38 are suitable for turn-tilt, side hung open in and tilt windows. When ordering handle n 1854 please indicate the quantity of left hand and right hand handles. C

Handles with rectangular backplate n 1855(AL)-25 n 1856-25 n 1855(AL)-38 n 1856-38 n 1857(AL)-25 n 1757-25 n

Left = opposite view Handles n 1857CYL-25 and 1857CYL-38 are suitable for turn-tilt, side hung open in and

12 Handles with rectangular backplate n 1855(AL)-25 n n 1855(AL)-38 n n 1857(AL)-25 n n 1857(AL)-38 n n 1857CYL-25 n 1857CYL-38 n n n n Right = illustrated Left = opposite view Handles n 1857CYL-25 and 1857CYL-38 are suitable for turn-tilt, side hung open in and tilt windows. When ordering handle n 1859 please indicate the quantity of left hand and right hand handles. C

13 2. Handles in combination with connection piece set 2.1. Connection piece set n C11.15 Connection piece set n screw connection piece 2.2. Connection piece set n (Chrono Safe) Connection piece set n screw connection piece block connection piece thickness piece Note: use of fixing holes 84 mm, 98 mm and 104 mm. In this case the fixing blocks for the connection piece must be mounted after fixing the handle because it must still be possible to slide the connection piece to fix the handle. C

Finish: n 30000-662, n 30000-659 and n 30000-657: grip in aluminium and base in zinc alloy, always polyester powder coated.

14 2.3. Standard handles The same handles can be used for turn-tilt, tilt-turn and bottom hung open in windows. So these windows can be used next to one another with the advantage of having the same appearance. Finish: n , n and n : grip in aluminium and base in zinc alloy, always polyester powder coated. n and n : grip and base in aluminium anodised or polyester powder coated. more than 450 RAL colours. Fixing holes: see page C N N C

15 N N N C

2.4. Handles with cylinder (CYL version) The high security system Chrono Safe must always be operated by cylinder locking handles n 30000-... CYL.

16 2.4. Handles with cylinder (CYL version) The high security system Chrono Safe must always be operated by cylinder locking handles n CYL. The cylinder locking handle can be locked in closed and tilt position. The same handles can be used for turn-tilt, tilt-turn and bottom hung open in windows. So these windows can be used next to one another with the advantage of having the same appearance. Finish: n CYL, n CYL and n CYL: grip in aluminium and base in zinc alloy, always polyester powder coated. n CYL and n CYL: grip and base in aluminium anodised or polyester powder coated. more than 450 RAL colours. Fixing holes: see page C N CYL N CYL C

17 N CYL N CYL N CYL C

2.5. Fireman s axe handle (V version) and loose grip N 30000-659V N 30000-657V The same

So these windows can be used next to one another with the advantage of having the same

Finish: handle n 30000-659V and -657V in zinc alloy, always polyester powder coated.

more than 450 RAL colours. Fixing holes: see page C11.15.21.

18 2.5. Fireman s axe handle (V version) and loose grip N V N V The same handles can be used for turn-tilt, tilt-turn and bottom hung open in windows. So these windows can be used next to one another with the advantage of having the same appearance. Finish: handle n V and -657V in zinc alloy, always polyester powder coated. handle n V and loose grip n 505 in aluminium anodised or polyester powder coated. more than 450 RAL colours. Fixing holes: see page C This version is especially suitable in places where only authorized persons can open the windows (by means of the loose grip n 505), but in case of fire the square pointed end of a fireman s axe can also operate the handle. N V N 505 C

2.6. Handles with key (W version) N 30000-659W N 30000-657W The same

19 2.6. Handles with key (W version) N W N W The same handles can be used for turn-tilt, tilt-turn and bottom hung open in windows. So these windows can be used next to one another with the advantage of having the same appearance. Finish: handle n W and -657W in zinc alloy, always polyester powder coated. handle n W in aluminium anodised or polyester powder coated. more than 450 RAL colours. Fixing holes: see page C This version must to be operated with the special key n 505W. With the key, the handle can be easily operated. N W N 505W C

20 2.7. Handles with long fork The handles with longer fork are available in 5 types: Handles with long fork Length fork L (mm) Distance between frame and vent X (mm) Besides the dimension X, the profiles must meet a number of profile requirements to obtain a good installation of the fittings. The required profile dimensions can be found on page C The same handles can be used for turn-tilt, tilt-turn and bottom hung open in windows. So these windows can be used next to one another with the advantage of having the same appearance. The handles are also available in V-, W-, S- and CYL version. Fixing holes: see page C C

21 2.8. Standard and S handle Standard version Handle type S 2.9. Handle preparations Standard version Handle type S A drilling jig n is available for the handle cut-out. C

22 2.10. Options Reinforcement piece for handle n and -692 N N The reinforcement pieces produce a more solid fixing of the handle. This piece serves as a clamping plate and prevents deformation of the profile wall or in extreme situations prevents the fixing screws being pulled through profiles with thin walls. Choice between 2 pieces depending on fixing hole configuration: N : standard handle N : handle type S Installation: see example. Reinforcement piece Cover n Cover to restrict the handle movement at 90. Not possible for handles n and Non-handed. Order separately. Not possible C

Louvre Specifications

Louvre Specifications Louvre System Components 01. Louvre windows shall be Kool Vu as manufactured by Pty Ltd. 0. Louvre channel frame shall be in extruded architectural grade 0 T aluminium. New Clips