The safe & affordable install
|
|
- Chastity Marybeth McCoy
- 5 years ago
- Views:
Transcription
1
2 QSLG1000 Quick-Sling SPECS QSLG1000 Each arm attaches to wood using 2 zip screws for stability & a 4 through bolt & wing nut for security. Installs to steel using steel beam adapters. 28 points of anti-vibration isolation is provided using four 50-derometer selfadhesive rubber pads & 24 rubber washers. Extension arms individually adjust in one inch increments using thumb screws & wing nuts for speed & versatility. Installs as high as 24 or as low as 48 on flat or pitched roofs. 32 secondary drain pan hangers are provided & install in seconds. Our Quick-Sling is made of 14-gauge square, steel tubing which not only cuts down on vibration but is also able to hold up to 400 lbs. 3 Dimensionally Adjustable Height: 24 to 48 Width: 38 to 48 Length: 32 to 48 Quick-Sling provides you with a non-swinging, solid platform that is quick, safe, stable and affordable.
3 QSHP36 3 Condenser Heat Pump Stand SPECS!! QSHP36 6 x6 feet with 50-derometer rubber pads on each foot. Four holes are ready to receive 3/8 hardware for mounting made from 7-gauge steel. Our 3 high heat pump stand fits 1.5 ton to 5 ton condensers/heat pumps. All necessary assembly hardware is provided. Our Heat Pump Stand is made of 11- gauge square, steel tubing which is powder coated with sea coast coating & able to hold up to 600 lbs. Our stand comes with two multiposition clips to secure the unit to the stand Quick-Sling Heat Pump Stand provides you with an elevated platform that is quick, safe, stable and affordable.
4 QSLD1001 Quick-Sling SPECS QSLD1001 Each arm attaches to wood using 2 zip screws for stability & a 4 through bolt & wing nut for security. Install to steel using steel beam adapters (sold separately). Extension arms individually adjust in 1 increments using thumb screws & wing nuts for speed & versatility. Installs as high as 36 or as low as 54 on flat or pitched roofs. 28 points of anti-vibration isolation is provided utilizing four 50-derometer selfadhesive rubber pads & 24 rubber washers. Our Quick-Sling is made of 14-gauge square, steel tubing which cuts down vibration and is able to hold up to 250 lbs. Adjustable in 2 dimensions: Height: 36 to 54 Length: 30 to 48 Fixed Width: 31 3/4 32 secondary drain pan hangers are provided & install in seconds. *Drain pan not included. Quick-Sling provides you with a non-swinging, solid platform that is quick, safe, stable and affordable.
5 QSTD1000 Quick Stand SPECS QSTD1000 Each foot attaches to wood using 4 zip screws for stability & security. 20 points of anti-vibration isolation are provided using four 50-derometer self adhesive rubber pads & 16 rubber washers. Each leg individually extends in 1 increments using thumb screws & wing nuts for speed and versatility. Installs as low as 22 on flat or uneven surfaces. Secondary pan shelf is provided for convenient install & future maintenance. *Drain pan not included. Our Quick Stand is made of 14-gauge square tubing which not only cuts down on vibration but is also able to hold up to 500lbs. 3 Dimensionally Adjustable: Height: Width: Length: Quick Stand provides you with a non-swinging, solid platform that is quick, safe, and affordable.
6 QSTD1001 Quick Stand SPECS QSTD1001 The Quick-Stand has a fixed height of 12, however you can adjust the length from 32 to 48. Our Quick Stand is made of 14-gauge square, steel tubing which not only cuts down on vibration but is also able to hold up to 300lbs. Secondary drain pan shelf is provided for a convenient install & future maintenance. *Drain pan not included. 4 points of anti-vibration isolation is provided using four 50-derometer self-adhesive rubber pads. Quick Stand provides you with a non-swinging, solid platform that is quick, safe, and affordable.
7 QSTD2001 Heat Pump Stand SPECS QSTD2001 The Quick-Stand has a fixed height of 18. The stand also has 4 pre-drilled holes on each of the four legs. QSTD2001 is very simple to install, has 16 points of rubber vibration. It also comes with stainless steel hardware. The QSTD2001 comes with 2 multi position clips for mounting the unit to the stand. 2 Dimensionally Adjustable Height 18 Fixed Width 24 x 38 Length 30 x 48 Quick-Sling Quick Stand provides you with a non-swinging, solid platform that is quick, safe, stable and affordable.
8 Mini Split Thin 1200 SPECS Each foot is slotted to receive 1/4 / 20 hardware, which is provided to bolt to concrete, cement, wood, or plastic pad for security and stability. Our 12 high Mini Split thin Stand typically fits units that are 18,000 BTU s & under. All the necessary hardware is provided. Our Mini Split Stand is made of 14- gauge square, steel tubing, which is powder coated for outdoor use & able to hold up to 400 lbs. 4 points of anti-vibration isolation washers are provided while using four 50-derometer rubber pads on each foot. Quick-Sling s Mini Split stand provides an elevated platform that is quick, safe, stable, and affordable.
9 QSMS1201 Mini Split Wide 1201 SPECS Each foot is slotted to receive 1/4 /20 hardware, which is provided to bolt to concrete, cement, wood, or plastic pad for security and stability. Our 12 high Mini Split wide Stand typically fits units that are 18,000 BTU s & under. All the necessary hardware is provided. Our Mini Split Stand is made of 14- gauge square, steel tubing, which is powder coated for outdoor use & able to hold up to 400 lbs. 4 points of anti-vibration isolation washers are provided while using four 50-derometer rubber pads on each foot. Quick-Sling s Mini Split stand provides an elevated platform that is quick, safe, stable, and affordable.
10 QSMS1202/1802 Dual Fan Mini Split Stand SPECS! QSMS1202/1802 Each foot is slotted to receive 1/4 /20 hardware in order to bolt to concrete, cement, wood or plastic pad for stability & security. 4 points of anti-vibration isolation washers are provided while using four 50- derometer rubber pads on each foot. Our Quick Sling Dual Fan Mini Split Stand is made of 14-gauge square tubing & 7 gauge steel which is powder coated with a sea coast coating & able to hold up to 400 lbs. Quick-Sling Dual Fan Mini Split Stand provides you with an elevated platform that is safe, stable and affordable. Our QSMS1202 is the only way to mount your dual fan condenser to ensure its up off the ground safely, with no tip overs.
11 QSMS1203 Measurements: * Foot Print 18 X 38 * Ground Height 12 *Total Height 40 *Width 36 *Depth 18 * Min Slot Pattern 7 3/8 *Max Slot Pattern 13 Mini Split QSMS1203 SPECS Fits All Mini Splits Two Versions Thin & Wide Each foot is slotted to receive 1/4 /20 hardware, which is provided to bolt to concrete, cement, wood, or plastic pad for security and stability. Our over/under stand can be ordered in two versions: Thin or Wide & fits all Mini Splits. All the necessary hardware is provided. This stand is made of 14-gauge square, steel tubing which is powder coated for outdoor use. The bottom shelf holds 400 lbs. the top shelf holds 200 lbs. 12 points of anti-vibration isolation washers are provided including four 50-derometer rubber pads for each foot. Quick-Sling s Mini Split stand provides an elevated platform that is quick, safe, stable, and affordable.
12 QSMS1800 Mini Split Thin 1800 SPECS Each foot is slotted to receive 1/4 /20 hardware, which is provided to bolt to concrete, cement, wood, or plastic pad for security and stability. Our 18 high Mini Split thin Stand typically fits units that are 18,000 BTU s & under. All the necessary hardware is provided. Our Mini Split Stand is made of 14- gauge square, steel tubing, which is powder coated for outdoor use & able to hold up to 400 lbs. 4 points of anti-vibration isolation washers are provided while using four 50-derometer rubber pads on each foot. Quick-Sling s Mini Split Stand provides an elevated platform that is quick, safe, stable, and affordable.
13 QSMS1801 Mini Split Wide 1801 SPECS Each foot is slotted to receive 1/4 /20 hardware, which is provided to bolt to concrete, cement, wood, or plastic pad for security and stability. Our 18 high Mini Split wide Stand typically fits units that are 18,000 BTU s & under. All the necessary hardware is provided. Our Mini Split Stand is made of 14- gauge square, steel tubing, which is powder coated for outdoor use & able to hold up to 400 lbs. 4 points of anti-vibration isolation washers are provided while using four 50-derometer rubber pads on each foot. Quick-Sling s Mini Split Stand provides an elevated platform that is quick, safe, stable, and affordable.
14 QSWI1000 Quick Swivel SPECS QSWI1000 Each arm attaches to wood using 2 zip screws for stability & a 4 through bolt & wing nut for security. It can also be installed to steel using our steel beam adapters. Extension arms individually adjust in 1 increments using thumb screws & wing nuts for speed & versatility. This U mount installs as high as 19.5 or as low as 27.5 on flat or pitched roofs. 12 points of anti-vibration isolation is provided along with 3 hitch pins for the H bracket. This adds to the safety & sturdiness of the Quick Swivel. Installation can be accomplished in minutes because all necessary hardware is provided. Attaching a Quick Swivel to your unit is fast & stress-free. Our Quick Swivel is made with 14-gauge steel able to hold 200 lbs. The swivel allows for 360 degree rotation for setting the perfect direction of air flow. The Quick Swivel can easily be installed in residential or commercial applications. Turn the Swivel in any direction you need, then lock it in place. Quick-Sling s Quick Swivel provides you with a non-swinging, rotating platform that is quick, safe, stable and affordable.
15 QSWI2000/2100 Quick Swivel SPECS QSWI2000/2100 Each arm attaches to wood using 2 zip screws for stability & a 4 through bolt & wing nut for security. It can also be installed to steel or wood using our steel beam adapters. Extension arms individually adjust in 1 increments using thumb screws & wing nuts for speed & versatility. This U mount installs as high as 19.5 or as low as 27.5 on flat or pitched roofs. Our Quick Swivel is made with 14- gauge steel able to hold 200 lbs. The swivel allows for 360 degree rotation for setting the perfect direction of air flow. 12 points of anti-vibration isolation is provided along with a hitch-pin used with the I bracket. The Quick Swivel can easily be installed in residential or commercial applications. Turn the Swivel in any direction you need then lock it in place. Quick-Sling s Quick Swivel provides you with a non-swinging, rotating platform that is quick, safe, stable and affordable.
16 QSWI3000 Quick Swivel SPECS QSWI3000 The flush mount hanger is slotted to receive a 5/16 lag bolt 16 or 24 on center. It can be attached parallel or perpendicular to the joist. The square steel tubing cuts down on vibration while 3 hitch-pins add to the safety and sturdiness of the Quick Swivel with H bracket. Our Quick Swivel is made with 14- gauge steel able to hold 200 lbs. The swivel allows for 360 degree rotation for setting the perfect direction of air flow. Installation can be accomplished in minutes because all necessary hardware is provided. Attaching a Quick Swivel to your unit is fast & stress-free. Quick Swivel provides you with a non-swinging, rotating platform that is quick, safe, stable and affordable. The Quick Swivel can easily be installed in residential or commercial applications. Turn the Swivel in any direction you need then lock it in place, it s that quick.
17 QSWI4000 Quick Swivel SPECS QSWI4000 The flush mount hanger arm is slotted to receive a 5/16 lag bolt 16 or 24 on center. It can be attached parallel or perpendicular to the joist. Our Quick Swivel is made with 14-gauge steel able to hold 200 lbs. The swivel allows for a rotation for setting the perfect direction of air flow. The square steel tubing cuts down on vibration while the hitch-pin adds to the safety and sturdiness of the Quick Swivel with I bracket. Installation can be accomplished in minutes because all necessary hardware is provided. Attaching a Quick Swivel to your unit is fast & stress-free. Quick-Sling s Quick Swivel provides you with a non-swinging, rotating platform that is quick, safe, stable and affordable. The Quick Swivel can easily be installed in residential or commercial applications. Turn the Swivel in any direction you need then lock it in place, it s that quick.
18 QSWB1000! Wall Bracket SPECS! QSWB1000 Our wall bracket works great with mini split units & is slotted for quick mounting. The QSWB 1000 is made of 14- gauge square, steel tubing which not only cuts down on vibration but is also able to hold up to 300 lbs. Four spacer bars snap into place with a saddle on each end. The J- bar installs at 32 to 48 for the perfect fit. The QSWB 1000 includes anti-vibration isolation using four 50-derometer rubber washers. It also incorporates galvanized hardware to secure the unit to the wall bracket. 4 multi-positional clips for side or bottom mounting is available. 3 Dimensionally Adjustable Height: 16 1/2 Depth: 22 1/4 Width: 32 to 48 Quick-Sling provides you with a non-swinging, solid platform that is quick, safe, stable and affordable.
19 VRF/VRV QUICK-SLING VRF/VRV STAND SPECS Our VRF/VRV Super Stand has four 12 x 12 feet, and sets up in under 5 minutes. It adjusts in 1/4 and 1/2 increments. This is done by rotating the foot 90 degrees. There are two 3/8 holes in each foot to secure the stand to your footing. Our VRF/VRV stands have two cross rails that are slotted to receive all major brands of VRF/VRV/HRV condensing units. Whether its a single unit or a combination of units, we have you covered. Our hardware is galvanized and our Super Stand is hot dipped galvanized or powder coated with a sea coast coating for corrosion protection. Quick-Sling VRF/VRV Stand provides you with a non-swinging, solid platform that is quick, safe, stable and affordable.
20 Accessories Quick-Sling Steel Adapter SPECS The QSAC 1000 QSAC1000/QSAC1100 SET OF 4 or SET OF 2 Quick-Sling Wood Adapter SPECS The QSAC 2000 The QSAC1000 & 1100 are made out of aluminum & able to hold up to 250 lbs each. QSAC2000/QSAC2100 SET OF 4 or SET OF 2 The QSAC2000 & 2100 are made of steel & are 12 long & 2 wide. Each of our wood beam adapters are able to hold up to 200 lbs. Each QSAC1000 is slotted to receive 3/8 threaded rod or C- clamps for easy mounting. They have a 1.5 bend that simply clips over the wood joist. All the necessary hardware is provided. Designed to overcome the obstacle of attaching to steel beams. All the necessary hardware is provided. Quick-Sling accessories help you overcome virtually any installation obstacle that is quick, safe, stable and affordable.
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS. Part # A7006
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS Part # A7006 Parts List Wobble Stopper Body Wobble Stopper Shaft Camper Bracket Lower Bracket Assembly Upper Bracket Upper Bracket Clamp 3/8 SAE Flat
More informationFlextray - F.A.S.T. Underfloor System
The is an innovative and flexible way to support and manage cables in raised floor applications. This Foldable, Adjustable, Stackable, Tool-less System uses Flextray, stands, and accessories to provide
More information4-foot Economy Sign Post. 4-foot post is rated at 2 pounds per foot. 7-foot Economy Sign Post
Introduction: ComplianceSigns.com offers a variety of sign posts, sign mounting hardware, sign bases, mounting tape and more to mount your safety signs indoors or out. We offer three styles of sign posts,
More informationSeven-eighths-spacing Rackmount Kit/Chassis Rackmount Kit. Techmar enclosure designs include interchangeable modular components,
SRK/CRK SERIES Seven-eighths-spacing Rackmount Kit/Chassis Rackmount Kit Techmar enclosure designs include interchangeable modular components, punched hole patterns and captive hardware, resulting in a
More informationIMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C3215/C3215A
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C3215/C3215A Minor movement (or settling) can occur in some incidental harsh driving conditions (On or off road). A rubber bed mat is not a requirement
More informationMitchell. Furniture Systems
Mitchell Furniture Systems Withstand the Test of Time Many of our tables are still in use after 40 years. They last that long because we simply build them better. More Steel Our tables have a solid feel
More informationA A A T E C H N O L O G Y
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. H A R D W A R E C A T A L O G TOTAL SOLUTION SERVICE For the Industrial Piping Marketplace 2011 www.aaatech.com 4 0 Y E A R S S E R V I N G I N D U S T
More informationCloset and Specialty Hardware
Closet and Specialty Hardware Door & Mirror Hardware...108 Magnetic and Bullet Catches... 108 Sliding Door Pulls........................................ 108 Mirror Clips/Glass Clips, Fittings and Latches...
More informationSection 11 Workstation Components
1 Section Quick and easy access to parts is made possible by the wide variety of trays, bins, and framing components available from Bosch. Individual workstation grab trays, containers, and ledges place
More informationOrdering Information How to get in touch with us. Standard lead times and colors
jh miller Product Catalog j h m i l l e r r e s o u r c e s, i n c. j h m i l l e r w o r k s p a c e s o l u t i o n s, i n c. 3 / 1 2 / 2 0 1 4 jh miller resources, inc. jh miller workspace solutions,
More informationPatient Protection Set. Deluxe Mobile Apron Rack. Mini Mobile Apron Rack
Patient Protection Set Set or order the individual aprons Four sizes, from large adult to infant.50mm Pb equivalent. Infab s exclusive belt with buckle closure Space efficient rack Solid aluminum, powder
More informationSteadiCam Parts List*
SteadiCam Parts List* A. 1 Bogen 3232 Monopod Swivel Tilt Head B. 1 1/2 internal to 1/2 external brass bushing flare adapter (part 9402249 at osh.com¹) C. 2 3/8 internal to 1/2 external brass bushing flare
More informationMACHETES & MACHETE SHEATHS HUDSON BAY AXE SINGLE EDGE AXE GUARD DOUBLE EDGE AXE GUARD LADDER PLATFORM. Machete CAT. NO.
Phone: 800-227-4255 www.hallssafety.com Fax: 724-458-0592 MACHETES & MACHETE SHEATHS Machete 2PMA18-18 Blade 2PMA22-22 Blade High quality machete. High carbon tempered steel blade. Black poly handle with
More informationSHOPFITTING. Grooved panel 664. Grooved panel accessories 665. Cash drawers 668. Partition hardware 675. Toilet partitions 686
SHOPFITTING Grooved panel 664 Grooved panel accessories 665 Cash drawers 668 SHELVING STRIPS & brackets 670 Partition hardware 675 Toilet partitions 686 662 www.nover.com.au www.nover.com.au 663 GROOVED
More information300 Model 870 Four Wheel Hose Cart Owner s Manual
300 Model 870 Four Wheel Hose Cart Owner s Manual IMPORTANT: READ THE OWNER S MANUAL BEFORE ASSEMBLING TOOLS REQUIRED: TWO ADJUSTABLE WRENCHES; HAND PUMP Estimated assembly time: 30 minutes PARTS LIST
More informationBEV-TENT COMPONENTS. Made in South Africa
BEV-TENT COMPONENTS REB MARKETING Distributing Agent Tel: (011) 452 9131 Cell: 072 965 6792 Fax: (011) 609 4615 15 Imvubu Road, Sebenza Ext 6, Edenvale orders@rebmarketing.co.za BEV-TENT 001 90 deg Elbow
More informationCREEK COMPANY PONTOONS
CREEK COMPANY PONTOONS ODC Sport XR 1 The ODC Sport XR 1 is an update on our best-selling 8 foot pontoon boat. FRAME Full take down, no-tools-required, heavy-duty black powder coated steel frame with Plastic
More informationBEV-TENT COMPONENTS. Made in South Africa
BEV-TENT COMPONENTS REB MARKETING Distributing Agent Tel: (011) 452 9131 Cell: 072 965 6792 Fax: (011) 609 4615 15 Imvubu Road, Sebenza Ext 6, Edenvale orders@rebmarketing.co.za BEV-TENT 001 90 deg Elbow
More informationTable and Furniture Base Fittings Furniture Feets
Aluminium base plate Material: Steel screw Finish: Screw galvanized Installation: With M8 screw Aluminium 14 634.50.465 Accessories Aluminium 634.50.460 Packing: 20 pcs. Aluminium 634.50.469 Packing: 20
More information3/8 BORE MOUNTING BRACKETS
3/8 BORE MOUNTING BRACKETS 11767 Ceramic Insulator Use with cylinder having #8-32 threaded shaft to insulate cylinder from heat or electricity #8-32 thd. - thru dia. Male Clevis 11996 Mounts in rear of
More informationDRAWER SYSTEMS HEAVY-DUTY STEEL & ALUMINUM Heavy-Duty Steel Drawer System. Heavy-Duty Aluminum Drawer System
HEAVY-DUTY STEEL & ALUMINUM DRAWER SYSTEMS Heavy-Duty Steel Drawer System 500 lb. Rated Slides - Drawer slides are rated to hold up to the rigors of heavy-duty use and will support heavy tools and other
More informationwww Littleton, 9861.horn Titan Park Circle CO etoutdoors.com BEYOND COMPARE
9861 Titan Park Circle Littleton, CO 80125 303.408.0250 www.hornetoutdoors.com BEYOND COMPARE Cargo Bed Rack RZR 2015 RZR-900, 900-S, 900-4 Rack with removable bottom $399.95 Hornet Roof Rack Spare Tire
More informationPole Line Hardware. Catalog
Catalog Table of Contents Anchor Rods... 3 Expanding Anchors... 3 Pole Bands... 4 Adjustable Pole Bands... 4 Connecting Links... 4 Malleable Guy Clips... 4 Shackles... 5 Crossarms... 5 Steel Braces...
More informationROLLATORS. Seat. Height. Adjustment GREEN X 1 1/4 32 1/2 X 36 1/ / KG 120 KG. Height. Seat. Height.
ROLLATORS DELUXE ALUMINUM ROLLATOR WITH LOOP BRAKES Suitable for indoor and outdoor use with height adjustable handles, converse handle with backrest belt. Loop brakes that can be locked to ensure safety.
More informationCabinet Mount Assist Lift n Lock Instructions
Cabinet Mount Assist Lift n Lock Instructions PART LIST 2 @ Gas Cylinder 1 @ Lock Bar 2 @ Rubber Sleeve (preset) 4 @ Stopper Pin (2pcs preset) 4 @ Saddle Block 8 @ 19mm Black PVC Cap 5 @ 14mm Black PVC
More informationPremium - Retractable Stand
Our Newest System! Elite - Retractable Stand The Elite is our top of the line banner stand. Upgraded benefits include a telescoping adjustable pole. Storage inside the base for the pole and top bar. A
More informationSelect Barn Equipment
Gates Kow Kisser Freestalls Rubber Matting & much more!!! TABLE OF CONTENTS Galvanized Gates...3 Fiberglass Gates...4 Flex-Tip Gates...4 Gate Options...5 Freestalls...6 Infra-rail System...7 Feedrail...10
More informationBEV-TENT COMPONENTS AGENTS. GAUTENG REB MARKETING-Nick Tel:- (011) Fax:- (011)
BEV-TENT COMPONENTS FACTORY KNYSNA Tel:- (044) 3823215 / 3824707 / 3823152 Fax:- (044) 3825709 Cel:- 0825543947 info@bgboats.co.za accounts@bgboats.co.za orders@bgboats.co.za - Ordering www.bev-tent.co.za
More informationstyle vision & quarter turns quarter turns section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
quarter turns vision & style quarter turns INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 3 quarter turns No. 626-PK Patent Pending
More informationProduct Cut Sheet Z4-SERIES SEISMICFRAME CABINET SYSTEM SERVICE PARTS
Service Parts This document lists service parts for the Z4 SeismicFrame Cabinet System. Service parts include mounting rails, top panel, side panels, doors and door lock kits and are used as replacement
More informationBath Safety Solutions
Solutions As your local pharmacy, we are committed to offering quality products for all of your home healthcare needs. From mobility aids to diabetes care to diagnostics, our comprehensive offering is
More informationBENEFITS OF A MOBILE TOOL CART STATION
BTK.011.03 BENEFITS OF A MOBILE TOOL CART STATION Many successful workshops realise the benefit of well organised tool storage. Increased productivity can be the result of minimising the time it takes
More informationBathroom. Toilet Aids. Folding Commode/Over Toilet Aid. Over Toilet Aid. Aspire Over Toilet Aid. Aluminium Over Toilet Aid
Folding Commode/Over Toilet Aid 2 Can be used beside the bed as well as over the toilet 2 Includes commode pan, toilet seat, toilet lid & removable backrest 2 Steel frame with plastic seat 2 Folds for
More informationRAFTER VI. Installation and Operation CAREFREE WITH AUTOMATIC AWNING SUPPORT. RV Accessory PRODUCT OVERVIEW
CAREFREE RAFTER VI RV Accessory WITH AUTOMATIC AWNING SUPPORT Installation and Operation PRODUCT OVERVIEW The gives the awning user the ability to easily tighten the center fabric when the awning is extended.
More informationProduct Catalogue. Breezy Everyday Living Aids Premium Products. Quality Service. Breezy Everyday Product Catalogue 2017 January
Product Catalogue Breezy Everyday Living Aids Premium Products. Quality Service. Breezy Everyday Product Catalogue 2017 January Table of Contents Grab Bars... 2 Wall Grab Bars... 2 Tub Grab Bar... 2 Toilet
More informationPARTS LIST EXTRACTOR ACCESSORIES
PARTS LIST EXTRACTOR ACCESSORIES 3 - JET WAND - 4097101 101 4097961 HANDLE ASSEMBLY - INCLUDES: 1 102 9121210 1/4-20 X 5/8 HEX BOLT 2 103 ---------- HANDLE CLAMP 1 104 9120920 1/4-20 HEX NUT 2 105 9120777
More informationFormulate Designer Series 10 Backwall - Kit 10
Formulate Designer Series 10 Backwall - Kit 10 FMLT-DS-10-10 Formulate Designer Series 10ft displays have unique stylistic features and shapes, are portable and easy to assemble. The aluminum tube frame
More informationEXPANDING 07BARRIERS
SECTION EXPANDING 07BARRIERS Note: BPG600RW shown with optional locking castors. When it comes to quality, range and flexibility of design, our Port-a-guard systems leads the industry in expanding barriers.
More informationProduct Catalogue. Breezy Everyday Living Aids Premium Products. Quality Service. Breezy Everyday Product Catalogue 2015 January
Product Catalogue Breezy Everyday Living Aids Premium Products. Quality Service. Breezy Everyday Product Catalogue 2015 January Table of Contents Grab Bars... 2 Wall Grab Bars... 2 Tub Grab Bar... 2 Toilet
More informationWINDOW TECHNOLOGY ORDER CATALOG SECTION Casement & Awning Windows Hardware
WINDOW TECHNOLOGY ORDER CATALOG SECTION 0. Casement & Awning Windows Hardware Table of Contents 0. Casement & Awning Windows Hardware Dyad Operator... 0..5 Dual Arm Operator... 0..5 Cover & Fold-in Handle...
More informationPARTS LIST COLT COLT HEPA
PARTS LIST COLT 800-1250 - 1450 COLT HEPA - 1250-1450 MOTOR / LID ITEM PART NO. PART DESCRIPTION QTY. 101 0891201 TOP COVER 1 102 0294341 TOP MOTOR SEAL 1 103 0299861 STRAIN RELIEF CORD CLAMP 1 104 0891131
More informationRailing & Wall Mount Storage Systems
.0 Railing & Wall Mount Storage Systems.1 Steel railing system rail, zinc alloy holder Finish: Rail and holder chrome polished : Individual positioning of items on the rail Diameter: Ø 16 mm Supplied with
More informationFormulate Designer Series 10 Backwall - Kit 06
Formulate Designer Series 10 Backwall - Kit 06 FMLT-DS-10-06 Formulate Designer Series 10ft displays have unique stylistic features and shapes, are portable and easy to assemble. The aluminum tube frame
More informationStrut Clamp Pipe & Conduit
PRODUCT SPECIFICATIONS 0F Strut Clamp Pipe & Conduit Size: Steel pipe sizes 2" through 0" Finish: Electro-Galvanized Pipe clamps are designed to fit into the opening of 5 /8" wide channel profiles Pre-Assembled
More informationNotes, Parts List & Drawings
Biomass Chopper/Cutter Notes, Parts List & Drawings Page 1 of 16 The Easy BioChop biomass chopper/cutter was designed to cut both wet and dry biomass and to accomplish a number of goals. The objectives
More informationHow to Build Your Own Flour Mill and Sifter
Prototype and plans developed by Hugo Gervais Custom Fabrication, North Hero, VT Materials List: How to Build Your Own Flour Mill and Sifter Quantity Materials 4 2 X 2 X 26 3 / 16 Square tubing 1 2 X 2
More informationQUALITY TIME 2013/14
QUALITY TIME 2013/14 PHIL OSO PHY Ever since Dick Allen turned metal tubing, straps, and padding into the first trunk mounted bicycle carrier in 1965, Allen s design philosophy has been governed by the
More informationAND LOAD CANOPY RACK SPECIFICATIONS
8MAY15 INSTRUCTIONS for the LOCK AND LOAD CANOPY RACK SPECIFICATIONS and SAFE LOADING REQUIREMENTS The Lock and Load ladder carrier for Truck Caps is a rack designed to mount to the top of a pickup truck
More informationL&W ENGINEERING INC.
L&W ENGINEERING INC. 2012-2013 107 INDUSTRIAL PARKWAY MIDDLEBURY, IN 46540 PHONE (574) 825-5351 FAX (574) 825-1006 WWW.LW-ENG.COM Pipe Hangers Welcome to L&W Engineering. Your quality source for fabricated
More informationCUSTOM CYLINDERS INTERNATIONAL, INC. SOCKET JENIE PRODUCTS
CUSTOM CYLINDERS INTERNATIONAL, INC. SOCKET JENIE PRODUCTS The SOCKET JENIE product line was developed for use with a 110V or battery operated drill motor to reduce the amount of time required to set up
More informationWelcome to GERBER TABLES. Your campground and rv park essentials company. Meeting the needs of the leisure industry since 1969
Welcome to GERBER TABLES Your campground and rv park essentials company Meeting the needs of the leisure industry since 1969 Why professionals in the industry choose GERBER picnic tables One-piece welded
More informationBATHROOM. aspire for safety comfort support ASPIRE BATHROOM RANGE. Shower Chairs.
BATHROOM aspire for... safety comfort support ASPIRE BATHROOM RANGE Shower Chairs Shower Stools Over Toilet Aids Toilet Surround Frame Raised Toilet Seats Associated Products www.aspirebathroom.com.au
More informationHome Improvement Fittings Wardrobe Fittings
Wardrobe rail Wardrobe rail, welded Finish: Chrome plated Material thickness: 0.8 1.5 mm Height: 30 mm Material thickness 0.8 mm 801.03.220 1.0 mm 801.13.220 1.2 mm 801.10.229 1.5 mm 801.09.22 Packing:
More informationCloset and Specialty Hardware
Closet and Specialty Hardware Door & Mirror Hardware...100 Magnetic and Bullet Catches... 100 Sliding Door Pulls........................................ 100 Mirror Clips/Glass Clips, Fittings and Latches...
More informationINSTRUCTION MANUAL ALEKO RETRACTABLE AWNING
INSTRUCTION MANUAL for ALEKO RETRACTABLE AWNING www.alekoproducts.com FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY! 1 Important Safety Precautions WARNING NOTE: FOR PERSONAL SAFETY,
More informationC Locker. Options: Small compartment storage perfect for personal effects. Louvered doors, simple and convenient to open and close.
C Locker C lockers offer a functional design to meet most applications, perfect for company changing rooms. No moving parts, double panel door and polypropylene handle with sound deadening retention. Small
More information2016 PRODUCTS & PRICES
2016 PRODUCTS & PRICES LENGTH STOPS THAT ARE USER FRIENDLY Orders 1-800-821-3491 Phone 1-717-484-0230 Fax 1-717-484-0933 E-mail mayaposi@att.net Web mayaposi-stop.com MAYA POSITIONING EQUIPMENT MFG CO.
More informationHINGES & STAYS. Hinges & Stays Large Take-Apart Hinge. Medium Take-Apart Hinge
Hinges & Stays HINGES & STAYS TAKE-APART-CONTINUOUS-WELD-ON-CONCEALED-STRAP-STOP-BUTT-OFFSET-LIFT-OFF-STAY 0.1 0-180800.0 Mat: Steel Finish: Zinc Plate Wt:.0kg /.1lbs.8. Acts as a hinge but allows quick
More informationTHE BATH THE TOILET THE SHOWER COMMODES BATH LIFT 68 BATHROOM & TOILET AIDS
Bathroom & Toilet Aids As well as being the most essential room in the house, the bathroom can also be one of the most dangerous and, in many cases, inaccessible to the elderly or disabled. But there are
More informationP3000 UNIVERSAL Clamp-On
IHI INSTRUCTION MANUAL Required Tools P3000 UNIVERSAL Clamp-On Wrench Allen Key P3001 65 ENDCAPS P3011 65 BLACK P300 7 ENDCAPS P301 7 WHITE P3003 ENDCAPS P3013 SILVER PART# DESCRIPTION ENDCAPS SIDE SUPPORTS
More informationTIN KNOCKER TK NO. 30 CLEAT BENDER INSTRUCTIONS & PARTS DIAGRAM. TK No. 30 CLEAT BENDER
1 TIN KNOCKER TK NO. 30 CLEAT BENDER INSTRUCTIONS & PARTS DIAGRAM TK No. 30 CLEAT BENDER Sheet Metal Equipment Sales Inc. Dean P. O'Connell, President Green Bay, Wisconsin Phone - (920)-662-9966 Fax -
More informationREAD ME FIRST! IMPORTANT WARNING! ENG. Roof top tent
Roof top tent ENG TENT031 220 min READ ME FIRST! Thank you for purchasing a Front Runner Roof Top Tent. Before you start, take a moment to familiarize yourself with these Fitting Instructions and the components
More informationStainless Steel Deck Rack. Safari Rack Urban Rack Basket Racks. Hard Top Carrier Bike Racks. Made in the USA
Safari Rack Urban Rack Basket Racks Stainless Steel Deck Rack Hard Top Carrier Bike Racks Made in the USA Safari Rack 5.0 Flat out carries what you need to take 5" deep basket ¾" Aluminum square tubing
More informationD3107/ FMT09DGRO6.5 REAR TIEDOWNS W/ FACTORY INSTALLED RECEIVER APPLICATION FITS
D3107/ FMT09DGRO6.5 REAR TIEDOWNS W/ FACTORY INSTALLED RECEIVER APPLICATION FITS Minor movement (or settling) can occur in some incidental harsh driving conditions (on or off road). A rubber bed mat is
More informationWALLCOVERING TOOLS MORE ON PAGES 22-23
Producing high quality work is easy when you use the Paste-mate from Advance Equipment. 62 in. & 40 in. heavy duty paste machines the name in paste machines Manual, gear driven pasting machine for heavier
More informationModel 698/ and Model in 1 Hose Reel Owner s Manual
Model 698/694 200 and Model 706 100 4 in 1 Hose Reel Owner s Manual 698/694 706 VISIT OUR WEBSITE: WWW.LIBERTYGARDENPRODUCTS.COM OR CALL US TOLL FREE AT 1-866-820-5805 LIBERTY GARDEN PRODUCTS, INC. 500
More informationEtac Clean. shower commode chairs
Etac Clean shower commode chairs Etac Clean Etac Clean is secure, safe and simple for both users and carers. With practical functionality and design, every detail of the chair has been developed to give
More informationRealhome LCL Lockers Specification
Realhome LCL Lockers Specification Realhome LCL Lockers are an excellent, durable and attractive range of lockers suitable for use in a wide range of industries. Realhome LCL Lockers use 13mm compact laminate
More informationSECTION 5. Hardware and Optional Accessories for Steel Doors:
SECTION 5 Hardware and Optional Accessories for Steel Doors: Yale Grade 2 Cylindrical Lock Yale Grade 1 Cylindrical Lock Yale Mortise Lock Standard Duty Exit Device Heavy Duty Exit Device Standard Duty
More informationFrequently Asked Questions
Frequently Asked Questions Once you add made-to-fit slide-out shelves and cabinet organizer systems to your existing cabinets you ll wonder how you ever lived without them! If you have questions that are
More informationAssembly TOOLS REQUIRED: 17mm and 14mm or equivalent wrenches.
Instructions for 3 Trimmer Rack, 3TR* *Patents Pending Assembly TOOLS REQUIRED: 17mm and mm or equivalent wrenches. 15 26 26 16 15 16 Attach the lower mounting brackets to the Trimmer Rack poles as shown
More informationBeds and Related Equipment for HSP
Beds and Related Equipment for HSP ITEM NUMBER TOTAL QTY BS-01 Single bed & Matress 28 BS-02 Double bed & Matress 2 BS-03 Bed for medical examination 4 BS-04 Folding bed 13 BS-05 3 sections hospital bed
More informationColor Light Streams Lighted Bubbler Spillway Pot (CLSDLP) Installation Manual
Color Light Streams Lighted Bubbler Spillway Pot (CLSDLP) Installation Manual 27.75 23.75 25.50 20.75 Specifications: 8-13 GPM 12-14 VAC only (Class 2 transformer required) 3W max. 100 ft. cord, conduit
More informationParts Catalog Issued: Jul 22, ICCI IH820 Series
Parts Catalog Issued: Jul, 04 ICCI IH80 Series Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service parts for. If you
More information80070 TOP MOUNT CAMPER SHELL and TRANSIT CONNECT RACK TMCS_3:1
ASSEMBLY INSTRUCTIONS for : 80070 TOP MOUNT CAMPER SHELL and TRANSIT CONNECT RACK TMCS_3:1 (916) 638-8703 (800) 343-7486 11261 Trade Center Drive Rancho Cordova, CA 95742 www.kargomaster.com Transit ASSEMBLY
More informationFBO-10 and FBO-14. Fuel Filter/Water Separator For High-Flow Applications. Product Features. Contact Information
FBO-0 and FBO-4 Fuel Filter/Water Separator For High-Flow Applications These versatile housings have three filter options to meet various requirements: a fuel filter/water separator, a silicone treated
More informationThe tried-and-tested complete range
The tried-and-tested complete range S 2000 Classic by C+P offers more than you have come to expect. Why? Because it is our ambition as the market leader in steel lockers to always stay ahead of the competition.
More informationquick and easy installation guide
www.directdriveopener.com quick and easy installation guide Back 2 Front. Motor Carriage 2. C-rail. Chain. Limit stops. Slide in part (tensioner) Rail assembly Insert C-rail parts () into the connecting
More informationIMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2213 / C2220
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2213 / C2220 Minor movement (or settling) can occur in some incidental harsh driving conditions (On or off road). A rubber bed mat is not a requirement
More informationMOBILITY SOLUTIONS Mini Catalog
MOBILITY SOLUTIONS Mini Catalog ABOUT STANDER With a commitment to quality and innovation, Stander s attractive mobility solutions help you and your loved ones continue to live an independent lifestyle.
More informationIMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS D3109. REVISED vers10 BY: DSK 1/9/2015 TECH SUPPORT (800)
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS D3109 REVISED vers10 BY: DSK 1/9/2015 TECH SUPPORT (800) 246-8132 AFTER INSTALL, PLEASE GIVE THIS BOOKLET TO YOUR CUSTOMER 1 Warnings Truck Bed and Camper
More informationCounter Display Items
1/4" Dr. x 3/8" Dr. Dual Drive Stubby Ratchet Part No. 640923 Dual drive 2 in 1 design Compact size is great for fasteners in tight areas Black composite coating with TPR injection handle for comfort 272504
More informationPRODUCT INFORMATION MANUAL SECTION: 17 METAL LOUVRE AWNINGS METAL LOUVRE AWNINGS
METAL LOUVRE AWNINGS Sizes & Limitations Metal Louvre Awnings TRINIDAD TRINIDAD SUNGUARD FIXED ADJUSTABLE Maximum Width Unlimited 5000mm Unlimited Minimum Width 500mm 500mm 500mm Maximum Drop 4000mm 2500mm
More informationGlass Door Fittings Glass Door Accessories
Angled striking plate Aluminium stainless steel coloured 981.27.983 Recess striking plate DIN left DIN right Steel nickel plated matt 911.39.285 911.39.28 WC thumbturn cylinder Area of application: For
More informationTuf-Lite and Tuf-Lite II Fans 6000M Series Hub
Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 32.8 or 10 Meter Diameter Hudson Tuf-Lite and Tuf-Lite II fan blades Hudson Tuf-Lite (black) fan blades
More informationEDM4X, EDM2X. Product Specifications EXPANSION VALVE COILS ALL MODELS
EDM4X, EDM2X Product Specifications EXPANSION VALVE COILS ALL MODELS 1 1/2 thru 5 Tons Multiposition installation upflow, downflow, or horizontal Available for R 410A or R 22 Bolt on TXV metering device
More informationInstruction Manual Remote Swabbing and Microbiological Sampling and Teflon template tools Version , Rev.0
ASSEMBLY AND OPERATIONAL INSTRUCTIONS The remote swabbing and microbiological sampling tool and the Teflon template tool are shipped partially assembled. Complete assembly instructions are provided below:
More information316 ALLOY MARINE GRADE STAINLESS STEEL
316 ALLOY MARINE GRADE STAINLESS STEEL CABLE RAILING KITS CROSSBAR ROD RAILING GLASS PANEL RAILING SWAGELESS FITTINGS King Metals has designed the new Meridian stainless steel line for style, function
More informationContents. Awnings USA - Full Protective Hood Manual Instructions ft 11" - 11ft 6" Awnings
Awnings USA - Full Protective Hood Manual Instructions Contents Warning We recommend that two or more people are required to lift the awning into place. 4ft 11" - 11ft 6" Awnings 8 x Expansion bolts **
More informationLockable Fasport. IFP-600 Dimensions Overall Height 9.5" Overall Width 10" Opening Dia. 6.5" Weight 9 lbs. Model
Lockable Fasport IFP-600 Overall Height 9.5" Overall Width 10" Opening Dia. 6.5" Weight 9 lbs Note: Specify glass thickness when ordering. Die cast body and lid. A12 Aluminum body and ASSA deadbolt. Steel
More informationEMERGENCY BED SYSTEM
EMERGENCY BED SYSTEM - Every product in our E-Bed System is designed with durability, ease of use and comfort in mind... THE EBED SYSTEM IS IDEAL FOR: PUBLIC HEALTH DEPARTMENTS HOSPITALS CORONERS SURGE
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFICATION Brand C.K Product Range Hacksaws Catalogue number 814, 903, 905, 834, 836A and 837 Date 09/02/2016 Range Description Professional quality Hacksaws and Junior Hacksaws Features 814
More informationTABLE & FURNITURE LEGS
LEGS & LEVELERS TABLE & FURNITURE LEGS Furniture Levelers Furniture levelers from, perfect for entertainment and built-in shelving units. Table Legs The PMI Table Leg line has been very popular for more
More information188 E. Kossuth Street Owners: Matthew Leasure and Diane Alecusan
Agenda Item #9 14-7-12b 188 East Kossuth Street 188 E. Kossuth Street Owners: Matthew Leasure and Diane Alecusan Exterior Maintenance/Improvements package June 2014 Existing primary and secondary facades
More informationDesign Standards. Utility Manhole Covers
Design Standards Utility Manhole Covers Texas A&M University in College Station has standardized utility manhole covers to be used for all underground utility access on campus. All new utility manhole
More informationADVANCE PRODUCTS & SYSTEMS, INC. FOR FLANGES, VALVES & EXPANSION JOINTS SAFETY SPRAY SHIELDS CONTAINS AND DETECTS HAZARDOUS SPRAYOUTS
ADVANCE PRODUCTS & SYSTEMS, INC. FOR FLANGES, VALVES & EXPANSION JOINTS SAFETY SPRAY SHIELDS CONTAINS AND DETECTS HAZARDOUS SPRAYOUTS SAFETY SPRAY SHIELDS FOR FLANGES CLOTH Our plastic cloth safety shields
More informationSilent Gliss. Hand Operated Curtain Track Systems
Hand Operated Curtain Track Systems Hand Operated Curtain Track System 1080 Product Information ersatile, sturdy hand-operated curtain track for domestic or contract use For medium weight curtains Elegant,
More informationAXELENT WIRE TRAY Wire Trays, Fittings, Mountings and Accessories. Technical manual
AELENT WIRE TRAY Wire Trays, Fittings, Mountings and Accessories Technical manual ver. 02-2015 Article Page Article Page 1 Fitting 11 2 Fitting 11 3 Angled Fitting 11 4 Fitting 11 5 Joining Fitting 11
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationDesign Standard. Utility Manhole Covers
Design Standard Texas A&M University in College Station has standardized utility manhole covers to be used for all underground utility access on campus. Until further notice, manhole covers manufactured
More information