HANDLES LHF115, LHR115, LHPB VARIOUS. Base Model Handles. MATERIAL Steel. FINISH Chrome Plated LHR115-1A

Save this PDF as:

WORD PNG TXT JPG

Size: px

Start display at page:

Download "HANDLES LHF115, LHR115, LHPB VARIOUS. Base Model Handles. MATERIAL Steel. FINISH Chrome Plated LHR115-1A"

Shon Gardner
8 months ago
Views:

Transcription

1 94

2 93

3 Base Model Handles LHF115, LHR115, LHPB VARIOUS LHR115-1A Front fixing A = 44.5mm Rear fixing A = 38mm A Padlockable Brackets 95

4 Base Model Handles THF100, THR100 VARIOUS Front fixing A = 44.5mm Rear fixing A = 38mm THR100-1A A

Padlockable SHP142CP, SHP142SS SHP142CP - Zinc Die Cast

5 Base Model Handles THF60, THR60 VARIOUS Front fixing A = 44.5mm Rear fixing A = 38mm THF60-1A A Swing Handle - Padlockable SHP142CP, SHP142SS SHP142CP - Zinc Die Cast SHP142SS - Stainless SHP142CP - SHP142SS - Polished

Swing Handle K/A 92268 SHL160SS1 Stainless Polished Key lockable.

SHK142BC-E SHK142CP-E 2551-002 SHP142BC Stainless 316 Polished Black/Chrome Black/Chrome Keyed 92268

6 Swing Handle K/A SHL160SS1 Stainless Polished Key lockable. Keyed Way Cam Swing Handles SHB142-, SHK142-, SHP142-, SHB142CP-E1 SHB142SS-E1 SHK142BC-E SHK142CP-E SHP142BC Stainless 316 Polished Black/Chrome Black/Chrome Keyed Euro Barrel Keyed Euro Barrel Keyed Euro Barrel - to suit SHK Series Padlockable SHK142CP-E SHP142BC 98

Padlockable Handle 9/00400, 9/00402 Stainless Polished Corrosion can be a major concern in some environments, such as marine industry or food processing plants, where these all-stainless handles will

9/00400 - Padlockable handle, open-fixing 9/00402 - Padlockable handle, concealed fixing 9/00402 9/00400 Arched Handle Non-Locking, Locking - 8mm Square Shaft 1/14600, 1/14300 Chrome Two other

7 Padlockable Handle 9/00400, 9/00402 Stainless Polished Corrosion can be a major concern in some environments, such as marine industry or food processing plants, where these all-stainless handles will be very useful. The padlockable loop enables doors to be secured, with visible evidence that locking has taken place. 9/ Padlockable handle, open-fixing 9/ Padlockable handle, concealed fixing 9/ /00400 Arched Handle Non-Locking, Locking - 8mm Square Shaft 1/14600, 1/14300 Chrome Two other long-established designs, both have unusual lengths of lever which make them suitable for special vehicle applications and for kit and replicas. Standard models are shown. Alternative mounting escutcheons are available, including concealed-fix options Locking 1/14300 Non-locking 99

Recess L Handles 9/00156, 9/00157, 9/00158 Black Powder Coated Pan Handle Stylish and atractive handles with circular, easy-fix escutcheon that are mounted through a standard pierced aperture.

9/00156 The equilateral design uses one, non-handed pan to suit both LH and RH applications.

9/00156 - Locking handle and pan 9/00157 - Non-locking handle and pan 9/00158 - Locking handle (FS880) and pan Recess T Handles 9/00184, 9/00185, 9/00186, 9/00186PSV Black Powder Coated Pan Handle An

8 Recess L Handles 9/00156, 9/00157, 9/00158 Black Powder Coated Pan Handle Stylish and atractive handles with circular, easy-fix escutcheon that are mounted through a standard pierced aperture. Lock cylinders are shuttered for weather resistance and handle can be water-sealed. Non-locking models are available. 9/00156 The equilateral design uses one, non-handed pan to suit both LH and RH applications. Supplied as boxed sets with the die-cast handles, these are suitable only for compartment doors carrying light loads - not for passenger vehicles. 9/ Locking handle and pan 9/ Non-locking handle and pan 9/ Locking handle (FS880) and pan Recess T Handles 9/00184, 9/00185, 9/00186, 9/00186PSV Black Powder Coated Pan Handle An extremely useful set that allows the large T handle to be mounted so that the arms of the handle do not project beyond the surface of the panel. The steel pan has four countersunk fixing holes and is normally black powder-coated, a moulded gasket is supplied as standard. Handles are chromium plated as standard and rotates o through 180, supplied as a box set. 9/ Recess T set, locking 9/ Recess T set, non-locking 9/ Recess T set, FS800 9/00186PSV - Recess T set with interior assembly 9/ / /

9 Heavy Duty Handle 9/01037, 9/01037/01, 9/01038 Black Powder Coated Suitable for all types of vehicles and substantial mechanisms. These handles have been created to provide a smart, modern design, much larger and stronger than any other currently available. At the same time they incorporate many features; in particular the mounting holes which are completely hidden and inaccessible when handles are in locked position. A point of weakness in most handles is the boss at the base of the main casting, which is prone to fracture around the steel shaft. With our new models the metal sections are more than twice as thick as usual, vastly increasing load-bearing capacity / Locking handle 9/01037/01 - Keyed FT111 9/ Non-locking handle 9/ / /01037/01 Latch Tongue ZP Suit 8mm square shaft 101

10 Latch Tongues - Suit 8mm Square Shaft 1588 ZP Suit 8mm square shaft Large Cam Square Shaft 9/00837 Die-cast 18 8 ZP Suit 8mm square shaft Latch Tongues 1590, 1592 ZP Suit 8mm Square Shaft Length 178mm Length 200mm 102

S3B6300ASSASSY S3B6300ASSY - Mild S3B6300ASSASSY - 304 S/

11 3 Point Cam with Collar and Studs S3B6300A ZP Suit 8mm square shaft 3 Point Cam with Collar and Rod Adapters S3B6300ASSY, S3B6300ASSASSY S3B6300ASSY - Mild S3B6300ASSASSY S/ S3B6300ASSY - Mild S3B6300ASSASSY - Raw Suits 8mm square shaft & 8mm Ø rods. 103

3 Point Cam With Rods RL1800, RL2400 ZP RL1800-3 Point cam with rods RL2400-3 Point cam with

282114, 282118, 282109, 283018, 285023, 285024 Mild - 282114, 282118, 282109 Stainless - 283018

282109-1200mm DETAIL B 15 (A) 8 282114, 282118, 2823018-8mm Rod with roller.

12 3 Point Cam With Rods RL1800, RL2400 ZP RL Point cam with rods RL Point cam with rods Suits 8mm square shaft Rod Ø = 8mm DIMENSION (A) RL mm RL mm Rod 8mm , , , , , Mild , , Stainless DETAIL A ZP , , Raw DIMENSION (A) mm , , mm DETAIL B 15 (A) , , mm Rod with roller mm Rod Guide A = 26mm mm Rod Guide A = 20mm mm Rod No Roller Rod Adaptor for 8mm rods 104

13 Three Way Slam Latch 3/ /1861 3/12341 Yellow ZP 3/12507 This system uses standard end-latches together with a three way mechanism and separate connecting tapes. In operation, the three slam bolts act together, and are withdrawn simultaneously as the handle rotates centre follow-bush. 3/22387 Tapes are slotted to slip over attachment points on centre mechanism, with the other end left plain. This should be cut to desired size, and rivetted to pierced bolt-pull of end latch. (A rivet and wave-washer is provided). End latches can be adjusted by screwing in bolt pull, and are fully reversible. The assembly as shown is suited for a right-side door (outside handle turns clockwaise to unlatch) but can be turned upside-down to fit left-side installation, in which case direction of handle rotation will be reversed. Angle of movement, outside handle 40*. Yellow zinc-plated finish throughout. Bolt spring pressure: initial, 3kg, final 6kg The complete assembly of 3/18342 includes all items shown. 34 Latch is shown as mounted on inside of panel, usually on right-side doors

14 2 Way Rod Latches 3/18794(5 ), 3/18794(6 ), 3/18794(8 ), 3/18795(6 ) ZP RH - 3/18794(5 ), 3/18794(6 ), 3/18794(8 ) LH - 3/18795(6 ) DIMENSION (A) 3/18794(5 ) mm 3/18794(6 ), 3/18795(6 ) mm 3/18794(8 ) mm (A) 2 Way Rod Latches 3/18238, 3/ ZP RH - 3/18238 LH - 3/

o Chest Handle w/ 180 Travel 93-1044MS 5 Mild 80 67 1

Handle CH120ZP Mild ZP 5 9.2 102 85 12 1.

CH637SS CH637ZP - Mild CH637SS - Stainless 8 101.6 82.

15 o Chest Handle w/ 180 Travel MS 5 Mild ZP PVC Sleeved Handle Chest Handle CH120ZP Mild ZP Spring Loaded Handle CH637ZP, CH637SS CH637ZP - Mild CH637SS - Stainless CH637ZP - ZP CH637SS - Raw PVC Sleeved Handle

Recessed Handle Spring-Loaded 97-596MS, 97-596SS 97-596MS -

16 Recessed Handle Spring-Loaded MS, SS MS - Mild SS - Stainless MS - ZP SS - Raw PVC Sleeved Handle Chest Handle UES Mild Zinc Plated

Internal Handle 1/5171 Die-cast Internal Handle

M5 Thread D Handle LS511-A75, LS11-A100 Zinc Die

17 Internal Handle 1/5171 Die-cast Internal Handle 1582, ZP 8 8 D Handle LS507-S75, LS507-S100 Stainless Polished DIMENSION (A) LS507-S75-75mm LS507-S mm M5 M5 Thread D Handle LS511-A75, LS11-A100 Zinc Die Cast DIMENSION (A) LS511-A75-75mm LS511-A mm M5 Thread M5 109

Entry Assist Handle 930-0000, 930-0001 Self Skinning Foam Black Polyurethane Coating

Grab Handle 9/01228, 9/01228/01 Core with Polyurethane Coating 9/01228 - Black

18 Entry Assist Handle , Self Skinning Foam Black Polyurethane Coating DIMENSION (A) mm length mm length (A) Hand Hold Grab Handle 9/01228, 9/01228/01 Core with Polyurethane Coating 9/ Black Polyurethane coating 9/01228/01 - Red Polyurethane coating Grab Handle - Offset 7/2542 Znic Die-Cast 110

19 Grab Handle (Alt # 1179) Zinc Die Cast Grab Handle 1188 Zinc Die Cast Grab Handle 1197 Zinc Die Cast 111

20 Grab Handle 1200 Zinc Die-cast Grab Rails 1455, 1457, 1459, 1461, 1463, 1465, 1467, 1469 Brass DIMENSION (A) mm mm mm mm mm mm mm mm 1457 Pull Handle UES Die-Cast 112

Cushioned Grip Handle 0786/001, 0786/002 Polyester coated, die-cast shell with black rubber core 0786/001: Black finish 0786/002: Silver finish Open Fix Die-Cast Handles 9/00214 Die Cast 16

Grab Handle With Snap-Shut Trim Panels Strong, lightweight, attractive. Plant-on fixing, secured with bolts into slotted holes, integral cover panels.

Meets EC 95/28CE regulation for combustibility (less than 100mm per minute).

21 Cushioned Grip Handle 0786/001, 0786/002 Polyester coated, die-cast shell with black rubber core 0786/001: Black finish 0786/002: Silver finish Open Fix Die-Cast Handles 9/00214 Die Cast 16 Black Powder Coated Grab Handle 1/30357B, 1/30357G, 1/30357W, 1/30357/02 Polypropylene 1/30357B - Black 1/30357G - Grey 1/30357W - White 1/30357/02 - Red External-Fix Grab Handle With Snap-Shut Trim Panels Strong, lightweight, attractive. Plant-on fixing, secured with bolts into slotted holes, integral cover panels. Textured finish, normal colours with black and blue/grey. Other colours to special request. Moulded in polypropylene. See table for physical properties. Meets EC 95/28CE regulation for combustibility (less than 100mm per minute) Load testing Tests carried out by an nidependent proof house gave the following results (at 15 C) Parallel to fixing: Max load 306kg before handle pulled away from bolts. Vertical to fixing: Max load 126kg before handle pulled away from bolts. With ultimate strength over 300kg we recommend a safe working load of 100kg max. Physical Properties of Polypropylene 113

Moulded Grab Handle 9/01225, 9/01725/03 9/01225 - Black Polyurethane coating 9/01725/03 - Yellow Polyurethane coating Moulded in expanded polyurethane foam, this handle has a soft, resilient surface

22 Moulded Grab Handle 9/01225, 9/01725/03 9/ Black Polyurethane coating 9/01725/03 - Yellow Polyurethane coating Moulded in expanded polyurethane foam, this handle has a soft, resilient surface with no sharp edges, while the steel core provides strength and rigidity. This modern design replaces traditional steel stanchion rails and ensures safety and comfort when used as a grab, or entry-assist rail Product Features 114

Grab Handle, Elastic Concealed Screw Mount

67098 - PVC 67969 - PVC/Leather 60081-1, 67098 -

23 Grab Handle, Elastic Concealed Screw Mount Polypropylene Black PVC Black PVC section with spring steel insert. City Bus Handle , , PVC PVC/Leather , Yellow Grey BUSHING PVC Band, Reinforced Polyamide stop. Bush is PA6+FG Without Bush mm Bush mm Bush. City Bus Handle GH001 Grey Suit 30mm Tube 115

Recessed Snap-in Handle P2 Handles UL94-HB ABS Black, textured Heavy duty design PRODUCT OVERALL WIDTH HEIGHT PANEL THICKNESS P2S2 93 35.5 1.5-2.

5 3-5mm Moulded Recess Grab Handle 9/01390, 9/01391 9/01390 - Glass Filled Nylon 9/01391 - Die Cast Black An attractive, flush fitting design

24 Recessed Snap-in Handle P2 Handles UL94-HB ABS Black, textured Heavy duty design PRODUCT OVERALL WIDTH HEIGHT PANEL THICKNESS P2S mm P2L mm P2L mm P2XL mm P2L mm Moulded Recess Grab Handle 9/01390, 9/ / Glass Filled Nylon 9/ Die Cast Black An attractive, flush fitting design which will fit neatly into a simple panel cut-out. It is moulded in glass-filled and die cast material, in black textured finish, and the plate is shaped to provide a comfortable grip

WARRENTY Void IF BROKEN 48,0 COMBINATIONS FIXED CYLINDER A A A A M = MASTER KEY SYSTEM: SUPPLIED TO ORDER ONLY

WARRENTY Void IF BROKEN 48,0 COMBINATIONS FIXED CYLINDER A A A A M = MASTER KEY SYSTEM: SUPPLIED TO ORDER ONLY Coin Lock 264/265/268 COIN RETURN TRAY 33,2 113,5 0,0 18,0 28,8 FOR 264,265 & 269 19,0 FOR 268 26,2 16,5 13,5 34,0 6,0 WARRENTY Void IF BROKEN 48,0 32,5 15,4 18,0 Ø 6,5 9,8 3,0 Ø22,0 1,5 5,6 (RH) REMOVE