SSPAF-12. Pre-Assembled Strut Fittings A Labor Savings Solution

Size: px
Start display at page:

Download "SSPAF-12. Pre-Assembled Strut Fittings A Labor Savings Solution"

Transcription

1 SSPAF-12 Pre-Assembled Strut Fittings A Labor Savings Solution

2 Cooper B-Line Pre-Assembled Fittings are a suitable alternative for virtually any job that requires standard fitting assemblies. Pre-assembled fittings combine channel nuts and bolts into a unique design that allows for easier and quicker installation on the jobsite, resulting in overall labor savings to the customer. Compare Pre-Assembled to Standard Fitting Assemblies Pre-Assembled Standard Pre-Assembled Fittings Features Combination design reduces the number of parts to handle and purchase Allows for easy adjustment when installed in channel Channel nuts and bolts have locking liquid applied (takes 5 ft./lbs. of torque to loosen) No worry of spring protruding through bottom of slotted channel Reduces installation time No more tangled spring nuts Available in Zinc Plated or DURA-GREEN finish Flat Plate Fittings B129PAZN Zinc Plated 72.5 lbs B129PAGRN DURA-GREEN 72.5 lbs B141PAZN Zinc Plated lbs B141PAGRN DURA-GREEN lbs 2

3 Flat Plate Fittings B341PAZN Zinc Plated lbs B341PAGRN DURA-GREEN lbs 7 1 /4" (184.1) B143PAZN Zinc Plated lbs B143PAGRN DURA-GREEN lbs B140PAZN Zinc Plated lbs B140PAGRN DURA-GREEN lbs B133PAZN Zinc Plated lbs B133PAGRN DURA-GREEN lbs 3

4 Flat Plate Fittings B132PAZN Zinc Plated lbs B132PAGRN DURA-GREEN lbs B142PAZN Zinc Plated lbs B142PAGRN DURA-GREEN lbs 90 Degree Angle Fittings B101PAZN Zinc Plated 61.1 lbs B101PAGRN DURA-GREEN 61.1 lbs 1 5 /8" (41.3) 2 5 /16" (58.7) B230PAZN Zinc Plated 69.2 lbs B230PAGRN DURA-GREEN 69.2 lbs 1 7 /8" (47.6) 2 1 /16" (52.4) 4

5 90 Degree Angle Fittings B231PAZN Zinc Plated 77.5 lbs B231PAGRN DURA-GREEN 77.5 lbs 2 1 /4" (57.1) 2 1 /4" (57.1) B102PAZN Zinc Plated 88.2 lbs B102PAGRN DURA-GREEN 88.2 lbs 2 1 /4" (57.1) B103PAZN Zinc Plated lbs B103PAGRN DURA-GREEN lbs 1 5 /8" (41.3) 4 1 /8" (104.8) B232PAZN Zinc Plated lbs B232PAGRN DURA-GREEN lbs 1 7 /8" (47.6) 3 15 /16" (100.0) 5

6 90 Degree Angle Fittings B374PAZN Zinc Plated lbs B374PAGRN DURA-GREEN lbs 2 1 /16" (52.4) 3 3 /4" (95.2) B104PAZN Zinc Plated lbs B104PAGRN DURA-GREEN lbs 4 1 /8" (104.8) B115PAZN Zinc Plated lbs B115PAGRN DURA-GREEN lbs 3 3 /4" (95.2) 3 15 /16" (100.0) Angular Fittings B155PAZN Zinc Plated 98.4 lbs B155PAGRN DURA-GREEN 98.4 lbs 13 /16" (20.6) /16" (20.6) 2 1 /2" (63.5) 6

7 Clevis Fittings B167PAGRN DURA-GREEN 178 lbs Zinc Plated finish shown. Contact Cooper B-Line for Zinc Plated options available for this item B172PAZN Zinc Plated lbs B172PAGRN DURA-GREEN lbs 7 1 /4" (184.1) 1/4" (6.3) B172-22APAGRN DURA-GREEN 406 lbs Zinc Plated finish shown. Contact Cooper B-Line for Zinc Plated options available for this item. U Fittings B107PAZN Zinc Plated lbs B107PAGRN DURA-GREEN lbs 1 5 /8" (41.3) 5 7 /16" (138.1) 7

8 Global Locations Cooper B-Line s U.S. Customer Service Service Facility - Canada: Cooper B-Line - Saudi Arabia: Center is staffed Monday through Friday from Cooper B-Line - Canada PO Box Al Khobar a.m. to 5:00 p.m. Central Standard Time. Div. of Cooper Ind. Canada, Inc. Kingdom of Saudi Arabia If a situation requires that you have to contact 5925 McLaughlin Road Phone: us after hours, please leave a message via Mississauga, ON L5R 1B8 Fax: phone or so we can give it immediate Canada blineme@cooperindustries.com attention the following business day. Phone: (800) Fax: (888) Literature Fulfillment Questions: Service Facility - United States: blinecanada@cooperindustries.com Phone: (314) Cooper B-Line - USA Fax: (314) West Monroe Street Service Facility - Europe: cooperbline@repcographics.com Highland, IL Cooper B-Line, Ltd. - UK United States Walrow, Highbridge Request Literature Website: Phone: (800) Somerset, TA9 4AQ Fax: (800) United Kingdom blineus@cooperindustries.com Phone: + 44 (0) Fax: + 44 (0) sales@cooperbline.co.uk Cooper B-Line 509 West Monroe Street Highland, IL Phone: Fax: Cooper US, Inc. 600 Travis, Ste Houston, TX Phone: Cooper B-Line, Inc. Printed in U.S.A. SSPAF

W & A PARTS MANUAL LEVEE PLOW STANDARD. Model No Blade Model No Blade (Parts Only)

W & A PARTS MANUAL LEVEE PLOW STANDARD. Model No Blade Model No Blade (Parts Only) W & A PARTS MANUAL LEVEE PLOW STANDARD Model No. 824 -- 8 Blade Model No. 836 -- 10 Blade (Parts Only) SPECIALIZED FARM EQUIPMENT Quality Products from W & A MANUFACTURING COMPANY P.O. Box 5238, Pine Bluff,

More information

Cooper B-Line targets your Grating needs with,

Cooper B-Line targets your Grating needs with, GSMSG-08 Safety Gratings Walkways, Flooring, Stair Treads & Ladder Rungs Including Grip Strut Safety Grating Focus Cooper B-Line targets your Grating needs with, more types more sizes & more finishes Grate-Lock

More information

WORKHOLDING COMPONENTS

WORKHOLDING COMPONENTS Adjustable Clamp Heels... 274 Adjustable Clamp Rests...273 Adjustable Step Blocks...284 Assemblies, Spherical Flange...260 Bolts, Dovetail...258 Bolts, Swing... 241 Bolts, T...258 Bolts, T-Slot...257 Bolts,

More information

Tidland Series 'C' Knifeholder MAINTENANCE MANUAL Crush Cartridge Class I, II, III Crush Slitting

Tidland Series 'C' Knifeholder MAINTENANCE MANUAL Crush Cartridge Class I, II, III Crush Slitting Tidland Series 'C' Knifeholder MAINTENANCE MANUAL Crush Cartridge Class I, II, III Crush Slitting Please read and understand all the instructions before you start to maintain the Tidland Series 'C' Knifeholder.

More information

Assembly TOOLS REQUIRED: 17mm and 14mm or equivalent wrenches.

Assembly TOOLS REQUIRED: 17mm and 14mm or equivalent wrenches. Instructions for 3 Trimmer Rack, 3TR* *Patents Pending Assembly TOOLS REQUIRED: 17mm and mm or equivalent wrenches. 15 26 26 16 15 16 Attach the lower mounting brackets to the Trimmer Rack poles as shown

More information

Installation & Operation Manual VHM Variable Height Series Arms with Fixed Angle Front End

Installation & Operation Manual VHM Variable Height Series Arms with Fixed Angle Front End 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation & Operation Manual VHM Variable Height Series Arms with Fixed Angle Front End Products covered

More information

T R AY IGHT WAY. CABLOFIL Tray Right Away Offering. Get ladder tray faster, directly to your jobsite. Ships from our facility in 5 days.

T R AY IGHT WAY. CABLOFIL Tray Right Away Offering. Get ladder tray faster, directly to your jobsite. Ships from our facility in 5 days. T R AY IGHT WAY CABLOFIL Tray Right Away Offering Get ladder tray faster, directly to your jobsite. Ships from our facility in 5 days. CABLOFIL Tray Right Away CUT SHIPPING TIMES IN HALF. START YOUR PROJECTS

More information

STOP BOX SCRAPER/GRADER BLADE. Owner's Manual. Model No Safety Assembly Operation Maintenance Parts

STOP BOX SCRAPER/GRADER BLADE. Owner's Manual. Model No Safety Assembly Operation Maintenance Parts Owner's Manual STOP BOX SCRAPER/GRADER BLADE Model No. 486.242411 DO NOT RETURN TO STORE For Missing Parts or Assembly Questions Call 1-866-576-8388 CAUTION: Before using this product, read this manual

More information

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS. Part # A7006

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS. Part # A7006 IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS Part # A7006 Parts List Wobble Stopper Body Wobble Stopper Shaft Camper Bracket Lower Bracket Assembly Upper Bracket Upper Bracket Clamp 3/8 SAE Flat

More information

TWO PERSON WALL MOUNT

TWO PERSON WALL MOUNT ONE TIER TWO TIER THREE TIER FOUR TIER FIVE TIER SIX TIER 16 PERSON TWO PERSON WALL MOUNT Specifications Body: Entire unit (bottom, sides, top, back, and shelves) constructed of mild cold rolled 24 ga.

More information

3/8 BORE MOUNTING BRACKETS

3/8 BORE MOUNTING BRACKETS 3/8 BORE MOUNTING BRACKETS 11767 Ceramic Insulator Use with cylinder having #8-32 threaded shaft to insulate cylinder from heat or electricity #8-32 thd. - thru dia. Male Clevis 11996 Mounts in rear of

More information

AJW. Athletic Series Lockers. Architectural Products ONE TIER TWO TIER THREE TIER FOUR TIER FIVE TIER SIX TIER

AJW. Athletic Series Lockers. Architectural Products ONE TIER TWO TIER THREE TIER FOUR TIER FIVE TIER SIX TIER ONE TIER TWO TIER THREE TIER FOUR TIER FIVE TIER SIX TIER Specifications Body: Backs constructed of mild cold rolled 18 ga. commercial grade steel. Bottom, sides, top, and shelves constructed of 16 ga.

More information

ONE-TOUCH INSPECTION DOOR

ONE-TOUCH INSPECTION DOOR Engineering Chain Division ONE-TOUCH INSPECTION DOOR Patented Design Easy Access Inspection Doors Durable and trouble-free Dust- and rain-tight Easy to open Easy to install EASY ACCESS TO YOUR LINES Put

More information

TITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V

TITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V TITAN pt. no.: 02 0000 0128 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended

More information

CONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9

CONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9 CONTENTS PAGE NUMBER Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5 Hoist Rings Center Pull 6 Side Pull 7 Socket Head Stripper Bolts Inch 8 Metric 9 Punch Holder Shanks 10 Roller Stock Guides 11

More information

Rhino-Rack SUNSEEKER II Awning 2.0 metres (32109)

Rhino-Rack SUNSEEKER II Awning 2.0 metres (32109) Important: Please read these instructions carefully prior to installation. Please refer to your fitting instruction to ensure that the roof racks are installed in the correct locations. Check the contents

More information

Fugitive Emission Test Report

Fugitive Emission Test Report Fugitive Emission Test Report API 624 1 st Edition Standard Performed for Clark Reliance Corp. 2015 Jerguson 70 Series ½ Class 800 Carbon Steel Gage Valve Met Qualifications Set Forth In API 624 1 st Edition

More information

W & A PARTS MANUAL STACKER TOOL BAR TOP LEVELING MODEL

W & A PARTS MANUAL STACKER TOOL BAR TOP LEVELING MODEL W & A PARTS MANUAL STACKER TOOL BAR TOP LEVELING MODEL Model No. 1272 -- 12 @ 38 Row - Bedder Model No. 1273 -- 12 @ 38 Row - Cultivator Model No. 1275 -- 12 @ 40 Row - Bedder SPECIALIZED FARM EQUIPMENT

More information

TWISTLOCK VEHICLE STABILIZER (TVS) SYSTEM INSTRUCTIONS

TWISTLOCK VEHICLE STABILIZER (TVS) SYSTEM INSTRUCTIONS TWISTLOCK VEHICLE STABILIZER (TVS) SYSTEM 22-797010, 22-797020, 22-796161 INSTRUCTIONS COMPONENTS: 1. TVS-100, PN 22-797010: 47 60 (119 cm 152 cm) stroke TwistLock Vehicle Stabilizer. Component weight,

More information

When moving the frame don t force anything! Move the leg to allow the brace to go over the rod.

When moving the frame don t force anything! Move the leg to allow the brace to go over the rod. THE IDLER Assembly and Care Instructions General notes Please read these instructions in their entirety before constructing your Idler Construction Before you begin constructing your Idler consider where

More information

DRAWER SYSTEMS HEAVY-DUTY STEEL & ALUMINUM Heavy-Duty Steel Drawer System. Heavy-Duty Aluminum Drawer System

DRAWER SYSTEMS HEAVY-DUTY STEEL & ALUMINUM Heavy-Duty Steel Drawer System. Heavy-Duty Aluminum Drawer System HEAVY-DUTY STEEL & ALUMINUM DRAWER SYSTEMS Heavy-Duty Steel Drawer System 500 lb. Rated Slides - Drawer slides are rated to hold up to the rigors of heavy-duty use and will support heavy tools and other

More information

Assembly. Step 3. Attach the safety bracket (7) to the Pivot ARM (6).

Assembly. Step 3. Attach the safety bracket (7) to the Pivot ARM (6). Assembly Step 1. A. Stand the base of the machine by separating the U-frames (1,2). Pull the Front and Rear U-Frames (1,2) as far apart from each other as possible. Then push down on the middle of the

More information

Operating Instructions

Operating Instructions Operating Instructions Medium and High Pressure Model Numbers: RT602- RT635- RT602- RT635- RT603- RT650- RT603- RT650- RT605- RT825- RT605- RT650-SM RT802- RT835- RT425- RT803- RT402- RT435- RT625- RT403-

More information

INSTRUCTION SHEET TWISTLOCK VEHICLE STABILIZER (TVS) SYSTEM PN S: , ,

INSTRUCTION SHEET TWISTLOCK VEHICLE STABILIZER (TVS) SYSTEM PN S: , , INSTRUCTION SHEET TWISTLOCK VEHICLE STABILIZER (TVS) SYSTEM PN S: 22-797010, 22-797020, 22-796161 COMPONENTS: 1. TVS-100, PN 22-797010: 47 60 (119 cm 152 cm) stroke TwistLock Vehicle Stabilizer. Component

More information

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C3215/C3215A

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C3215/C3215A IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C3215/C3215A Minor movement (or settling) can occur in some incidental harsh driving conditions (On or off road). A rubber bed mat is not a requirement

More information

* * 4023 KR. Step 1 Prepare the Keyed Removable Unit. Not for use on electric or fire rated removable mullions

* * 4023 KR. Step 1 Prepare the Keyed Removable Unit. Not for use on electric or fire rated removable mullions condition. *64009-00* 64009-00 Keyed Removable Mullions 403 KR Installation Instructions Not for use on electric or fire rated removable mullions This kit includes the following parts: (Not to scale) 5/6

More information

Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub

Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 32.8 or 10 Meter Diameter Hudson Tuf-Lite and Tuf-Lite II fan blades Hudson Tuf-Lite (black) fan blades

More information

Operating Instructions

Operating Instructions Operating Instructions Series RT Spring Driven Hose Reels Low Pressure Model Numbers: RT402-OLP RT605-OLP RT450-OLP RT835-OLP RT403-OLP RT802-OLP RT465-OLP RT850-OLP RT405-OLP RT803-OLP RT625-OLP RT450-OLPSM

More information

PR-429BF-600M. Bell 429 Blade Fold Kit Operations Manual

PR-429BF-600M. Bell 429 Blade Fold Kit Operations Manual Table of Contents Table of Contents... 1 Record of Revisions... 2 References... 3 Introduction... 4 Contact Information... 4 Prerequisites... 5 First Time Use... 6 Blade Clamp Placement... 6 Blade Clamp

More information

Additional Support Underneath the Tank Compartment Floor

Additional Support Underneath the Tank Compartment Floor Additional Support Underneath the Tank Compartment Floor Reading in recent discussions about the sagging of the tank compartment floor caused me concern so I decided to check the condition of my coach's

More information

DURA WHEEL CHAIR LOCKER ASSEMBLY INSTRUCTIONS

DURA WHEEL CHAIR LOCKER ASSEMBLY INSTRUCTIONS DURA WHEEL CHAIR LOCKER ASSEMBLY INSTRUCTIONS 1. Locate a Frame and Door: Start by locating a frame and door. 2. Front Frame: Now stand up the frame and door in the desired assembly area. 3. Exterior Wall:

More information

PROFILE SYSTEM HANDLES, LOCKS, STOPS HANDLE, LOCKS, STOPS 108 MINITEC PROFILE SYSTEM

PROFILE SYSTEM HANDLES, LOCKS, STOPS HANDLE, LOCKS, STOPS 108 MINITEC PROFILE SYSTEM PROFILE SYSTEM HANDLES, LOCKS, STOPS s pot S, s k c ol, s e l dnah HANDLE, LOCKS, STOPS 108 MINITEC PROFILE SYSTEM HANDLE AL Part. N 21.1138/0 - Aluminium, natural anodized - Weight 0,050 kg - Show cases

More information

Rhino-Rack SUNSEEKER II Awning (32105)

Rhino-Rack SUNSEEKER II Awning (32105) (32105) Important: Please read these instructions carefully prior to installation. Please refer to your fitting instruction to ensure that the roof racks are installed in the correct locations. Check the

More information

Rhino-Rack SUNSEEKER II Awning

Rhino-Rack SUNSEEKER II Awning Important: Please read these instructions carefully prior to installation. Please refer to your fitting instruction to ensure that the roof racks are installed in the correct locations. Check the contents

More information

Product Cut Sheet Z4-SERIES SEISMICFRAME CABINET SYSTEM SERVICE PARTS

Product Cut Sheet Z4-SERIES SEISMICFRAME CABINET SYSTEM SERVICE PARTS Service Parts This document lists service parts for the Z4 SeismicFrame Cabinet System. Service parts include mounting rails, top panel, side panels, doors and door lock kits and are used as replacement

More information

Flextray - F.A.S.T. Underfloor System

Flextray - F.A.S.T. Underfloor System The is an innovative and flexible way to support and manage cables in raised floor applications. This Foldable, Adjustable, Stackable, Tool-less System uses Flextray, stands, and accessories to provide

More information

33100 LH - Batwing Awning RH - Batwing Awning

33100 LH - Batwing Awning RH - Batwing Awning 33100 LH - Batwing Awning 33200 RH - Batwing Awning 1. Check Part No./Kit is correct 3. Fit roof rack accessory 2. Read through instruction before installing 4. Check and recheck all fasteners are secure

More information

POWER INSTALLED SCREW ANCHOR WRENCH

POWER INSTALLED SCREW ANCHOR WRENCH 232 Phone: 00-323-6606 Fax: 47-4-125 www.hilineco.com KELLY BAR ADAPTER LOCKING DOG EXTENSION POWER INSTALLED SCREW ANCHOR WRENCH For installing torques up to 10,000 ft.-lbs. A complete wrench consists

More information

RETRACTABLE AWNING w/ OPTIONAL HOOD ASSEMBLY INSTRUCTIONS

RETRACTABLE AWNING w/ OPTIONAL HOOD ASSEMBLY INSTRUCTIONS Contact us @ (800)851-0865 RETRACTABLE AWNING w/ OPTIONAL HOOD ASSEMBLY INSTRUCTIONS Congratulations on your purchase of a new retractable awning. With proper installation this awning will provide years

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS KR54, KR1654, & KR4954 Keyed Removable Mullion NOT FOR USE ON ELECTRIC OR FIRE RATED MULLIONS. This kit includes the following parts: (Not to scale) WARNING Remove key, reinstall,

More information

INSTALLATION & MAINTENANCE MANUAL SERIES 9000 MODELS 9150/9300 SERIES 9000 VALVES WITH V BALL

INSTALLATION & MAINTENANCE MANUAL SERIES 9000 MODELS 9150/9300 SERIES 9000 VALVES WITH V BALL BRIEF INTRODUCTION Split body (2-piece) valve allows easy replacement of gasket, seal, and seats without special tools. Series 90D ball valves use floating ball design. Induced by the line pressure the

More information

VEPR Round Drum Disassembly and Assembly

VEPR Round Drum Disassembly and Assembly VEPR 12 25 Round Drum Disassembly and Assembly Required Tools ¼ Allen Wrench Flat Head Screwdriver Drum Parts List Drum Body Carousel Center Bolt Dummy Rounds Carousel Lock Spring Clear Drum Cover Step

More information

INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL AWNINGS. For trailers & motor homes with straight sides TOOLS REQUIRED

INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL AWNINGS. For trailers & motor homes with straight sides TOOLS REQUIRED AWNINGS INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL For trailers & motor homes with straight sides TOOLS REQUIRED 1/4" electric drill Ratchet handle kit 3/8" & 7/16" socket No. 1 and No. 2 screwdriver

More information

The Lock People SERVING INDUSTRY SINCE 1971

The Lock People SERVING INDUSTRY SINCE 1971 1-800-854-3565 U.S. Patent#: 4,694,667. Made in USA. Copyright 2006, Hodge Products, Inc. www.lockpeople.com The Lock People SERVING INDUSTRY SINCE 1971 page 2 Suggested Uses Fences & Gates All Types of

More information

2100 Series Series Emergency Pressure Relief Vent and Manhole Cover. North America Only. Table of Contents. Introduction. Scope of the Manual

2100 Series Series Emergency Pressure Relief Vent and Manhole Cover. North America Only. Table of Contents. Introduction. Scope of the Manual Instruction Manual D103823X012 September 2017 Emergency Pressure Relief Vent and Manhole Cover Table of Contents Introduction...1 Specifications...2 Product Identification and Marking...3 Principle of

More information

Tuf-Lite III Fans 4000KW Series Hub

Tuf-Lite III Fans 4000KW Series Hub Tuf-Lite III Fans 4000KW Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 11 through 20 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass

More information

DRS Mobile Demolition Shears by kinshofer. page 1

DRS Mobile Demolition Shears by kinshofer. page 1 DRS Mobile Demolition Shears by kinshofer page 1 THE PRODUCT: DEDICATED SHEARS OF THE DRS SERIES DRS scrap and demolition shears for every kind of vehicle scrapping and shipbreaking as well as for the

More information

Technical data Folding arm awning BX260

Technical data Folding arm awning BX260 Technical data Folding arm awning BX260 art.nr. 34850 Inhoudsopgave 1. Generalities page 4 2. The profiles page 4 3. Other components page 5 4. Mimimum and maximum sizes page 10 5. Coupled awnings page

More information

CLAMPS. Clamps Extra Large Six Hole Clamp Large Six Hole Clamp 62 2.

CLAMPS. Clamps Extra Large Six Hole Clamp Large Six Hole Clamp 62 2. Clamps CLAMPS TWO-FOUR-SIX HOLE DESIGNS-RIGHT ANGLE-RIVET PROTECTORS-OFFSET-ZIPCLAMP 04 04-7800 Extra Large Six Hole Clamp 2. 2. 8 2.28..0 Mat: Steel Finish: Zinc Plate Wt:.0kg /.lbs.9 For use on trunks,

More information

FLEX KEY ASSEMBLY. ..._ o RAFTER ARM TUBE MAIN ARM TUBE CAP NUT CLAW HINGE

FLEX KEY ASSEMBLY. ..._ o RAFTER ARM TUBE MAIN ARM TUBE CAP NUT CLAW HINGE ZIP DEE Inc. 96 Crossen Ave. Elk Grove Village, IL 60007(847)437-0980 (800)338-2378 HEAD CASTING AWNING RAIL FLEX KEY ASSEMBLY..._ o GM1 Installation Instruction GMC Motorhome RAFTER ARM TUBE MAIN ARM

More information

RIGGING & TRADESHOW SUSPENSION APPLICATIONS

RIGGING & TRADESHOW SUSPENSION APPLICATIONS RIGGING & TRADESHOW SUSPENSION APPLICATIONS VOLUME VI 1 GRIPLOCK SYSTEMS Griplock Systems has been providing manufacturers and contractors with the world s highest quality and most reliable cable suspension

More information

EEZI - AWN series 1000 / 2000 Awning bracket

EEZI - AWN series 1000 / 2000 Awning bracket EEZI - AWN series 1000 / 2000 Awning bracket RRAC063 INSTALL TIME: 15 mins IMPORTANT WARNING! IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE.

More information

TIN KNOCKER TK NO. 30 CLEAT BENDER INSTRUCTIONS & PARTS DIAGRAM. TK No. 30 CLEAT BENDER

TIN KNOCKER TK NO. 30 CLEAT BENDER INSTRUCTIONS & PARTS DIAGRAM. TK No. 30 CLEAT BENDER 1 TIN KNOCKER TK NO. 30 CLEAT BENDER INSTRUCTIONS & PARTS DIAGRAM TK No. 30 CLEAT BENDER Sheet Metal Equipment Sales Inc. Dean P. O'Connell, President Green Bay, Wisconsin Phone - (920)-662-9966 Fax -

More information

Electrical Specifications. Dimensions (inches)

Electrical Specifications. Dimensions (inches) Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power

More information

Aftermarket Installation Manual

Aftermarket Installation Manual Straptek Installation Manual Table of Contents Introduction... 2 Straptek Weight Tension Technology.... 2 Disadvantages with Typical Weight Distribution Systems (WDS)... 2 Straptek Advantages:... 2 Quick

More information

PARTS BOOK FLAIL HEADS 90 REAR 3PT HITCH MOUNT

PARTS BOOK FLAIL HEADS 90 REAR 3PT HITCH MOUNT PARTS BOOK FLAIL HEADS 90 REAR 3PT HITCH MOUNT 5.0.8 DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 5704 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS WILL DIAGNOSE YOUR

More information

Electrical Specifications. Dimensions (inches)

Electrical Specifications. Dimensions (inches) Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power

More information

PARTS INCLUDED IN YOUR KIT. You may want to lay them out in this manner for accessibility. Foam has NO adhesive to touch truck finish.

PARTS INCLUDED IN YOUR KIT. You may want to lay them out in this manner for accessibility. Foam has NO adhesive to touch truck finish. INSTALL ATION SHEET Tarp Assembly with Cab Rail, Tail Rail and Support Bows attached. Left and Right Side Rail Assemblies U Clamps (x 6) NOTICE: If your truck has a bedliner that wraps over any top edges,

More information

PARTS INCLUDED IN YOUR KIT. You may want to lay them out in this manner for accessibility. Foam has NO adhesive to touch truck finish.

PARTS INCLUDED IN YOUR KIT. You may want to lay them out in this manner for accessibility. Foam has NO adhesive to touch truck finish. -'07 Ford Sport Trac Tarp Assembly with Cab Rail, Tail Rail and Support Bows attached. Left and Right Side Rail Assemblies Sport Trac Brackets (x4) Clamp Bolts Allen Wrench PARTS INCLUDED IN YOUR KIT.

More information

TECHNICAL DATA SHEET EZE Hub Shoring System

TECHNICAL DATA SHEET EZE Hub Shoring System EZE Hub Shoring System WWW.EZE-SHORING.CO.UK / INFO@EZE-SHORING.CO.UK / 01422 203222 1 EZE Shoring Composite Trench Lining System The EZE Shoring composite trench lining system is the world s first non-metallic

More information

Door Bushing Replacement & Latch Adjustment Monaco Group Coaches

Door Bushing Replacement & Latch Adjustment Monaco Group Coaches Door Bushing Replacement & Latch Adjustment Monaco Group Coaches Contents Door Latch Adjustment & Repair... 1 Symptoms:... 1 Replacing the bushing VS. Adjusting the latch rods.... 1 How the bushing works....

More information

Trailer Hitch Bracket w/ Telescoping Pole Mount - Extends From 3.19 Feet to 8.35 Feet

Trailer Hitch Bracket w/ Telescoping Pole Mount - Extends From 3.19 Feet to 8.35 Feet Trailer Hitch Bracket w/ Telescoping Pole Mount - Extends From 3.19 Feet to 8.35 Feet Part #: THB-TM8 Page: 1 The THB-TM8 from Larson Electronics is a telescoping pole to raise equipment above a work site

More information

Gas Go Anywhere /23/01

Gas Go Anywhere /23/01 Gas Go Anywhere 55014 02/23/01 FOR OUTDOOR USE ONLY This grill does not include an LP fuel tank. Check Package Contents You should have received the parts listed below. While we give much attention to

More information

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS. Part # C3206. REVISED Version 6 BY: JL 8/5/2015 TECH SUPPORT (800)

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS. Part # C3206. REVISED Version 6 BY: JL 8/5/2015 TECH SUPPORT (800) IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS Part # C3206 REVISED Version 6 BY: JL 8/5/2015 TECH SUPPORT (800) 246-8132 Warnings Truck Bed and Camper Protection Torklift does not recommend installing

More information

HANDLES, LE VERS & CR ANKS

HANDLES, LE VERS & CR ANKS Handles, Levers & Cranks Plastic Pull/Lift Handle...112 Plastic Revolving Fold-Away Handle... 95 Plastic Revolving Heavy Duty Handle With Steel Shank... 92 Plastic Revolving Handle With Steel Through Shank...

More information

Clearly the Best FLEXIBLE PVC SOLUTION

Clearly the Best FLEXIBLE PVC SOLUTION Clearly the Best FLEXIBLE PVC SOLUTION M.T.I. See-Thru STRIP DOORS MT.I. Flexible See-Thru Strip Doors are an economical answer to various barrier problems including shops, factories, warehouses, food

More information

3000 SERIES VIPER II FERTILIZER COULTER

3000 SERIES VIPER II FERTILIZER COULTER 3000 SERIES VIPER II FERTILIZER COULTER OPERATOR S MANUAL PART IDENTIFICATION 2565-690_REV_H 10/2013 YETTER MANUFACTURING CO. FOUNDED 1930 Colchester, IL 62326-0358 Toll free: 800/447-5777 309/776-3222

More information

SPIRAL SLICER Instruction Manual Model #5280 & 5280M. Part No Revised Feb. 2010

SPIRAL SLICER Instruction Manual Model #5280 & 5280M. Part No Revised Feb. 2010 SPIRAL SLICER Instruction Manual Model #5280 & 5280M Part No. 82876 Revised Feb. 2010 SAFETY PRECAUTIONS INSTALLATION INSTRUCTIONS Inspection of Shipment: 5280 & 5280M SPIRAL SLICER Unpack all cartons

More information

Section 11 Workstation Components

Section 11 Workstation Components 1 Section Quick and easy access to parts is made possible by the wide variety of trays, bins, and framing components available from Bosch. Individual workstation grab trays, containers, and ledges place

More information

A A A T E C H N O L O G Y

A A A T E C H N O L O G Y A A A T E C H N O L O G Y & SPECIALTIES CO., INC. H A R D W A R E C A T A L O G TOTAL SOLUTION SERVICE For the Industrial Piping Marketplace 2011 www.aaatech.com 4 0 Y E A R S S E R V I N G I N D U S T

More information

HANDWHEELS.

HANDWHEELS. HANDWHEELS 5 Handwheels Aluminum Angular Solid Handwheel...5.2 Aluminum Angular Spoked Handwheel... 5.2 Aluminum Finger Wheel... 5.10 Cast Angular Spoked Handwheel... 5.3 Cast Iron Angular Spoked Handwheel...

More information

TOOLING COMPONENTS. tel fax Clamping Kits Step Blocks...7. Driver Studs...

TOOLING COMPONENTS.  tel fax Clamping Kits Step Blocks...7. Driver Studs... Clamping Kits... 2-8 Step Blocks...7 Driver Studs... 9-13 Bolts, Screws... 14-20 Nuts, Washers... 21-29 Sex Bolts... 30-31 Clamps... 32-44 Screws... 45-49 Knobs & Levers... 49-53 Rest Pads...54 Index Plungers...

More information

RAFTER VI. Installation and Operation CAREFREE WITH AUTOMATIC AWNING SUPPORT. RV Accessory PRODUCT OVERVIEW

RAFTER VI. Installation and Operation CAREFREE WITH AUTOMATIC AWNING SUPPORT. RV Accessory PRODUCT OVERVIEW CAREFREE RAFTER VI RV Accessory WITH AUTOMATIC AWNING SUPPORT Installation and Operation PRODUCT OVERVIEW The gives the awning user the ability to easily tighten the center fabric when the awning is extended.

More information

Solera Crank Style Awning OWNER'S MANUAL. Rev: Page 1 Solera Crank Awning Owner's Manual

Solera Crank Style Awning OWNER'S MANUAL. Rev: Page 1 Solera Crank Awning Owner's Manual Solera Crank Style Awning OWNER'S MANUAL Rev: 06.16.2016 Page 1 Solera Crank Awning Owner's Manual TABLE OF CONTENTS System Information 2 Operation 3 Extending The Awning 3 Retracting The Awning 4 Adjusting

More information

AND LOAD CANOPY RACK SPECIFICATIONS

AND LOAD CANOPY RACK SPECIFICATIONS 8MAY15 INSTRUCTIONS for the LOCK AND LOAD CANOPY RACK SPECIFICATIONS and SAFE LOADING REQUIREMENTS The Lock and Load ladder carrier for Truck Caps is a rack designed to mount to the top of a pickup truck

More information

Step by Step Set Up Guide

Step by Step Set Up Guide lite Step by Step Set Up Guide 1 lifting lug Secure lifting lugs to a certified lifting sling. Stand and stabilize escape system under work platform. Position module with round lunette ring facing work

More information

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS D2126, D2127. REVISED version 8 BY: TD 1/30/2015 TECH SUPPORT (800)

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS D2126, D2127. REVISED version 8 BY: TD 1/30/2015 TECH SUPPORT (800) IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS D2126, D2127 REVISED version 8 BY: TD 1/30/2015 TECH SUPPORT (800) 246-8132 Warnings Truck Bed and Camper Protection Torklift does not recommend installing

More information

hydraulic steelworker

hydraulic steelworker C O M P A C T hydraulic steelworker The Compact 45 is the most compact steelworker in the range of Kingsland hydraulic steelworkers. Kingsland machines are built using the long experience gained in the

More information

DeZURIK AM-SERIES MANUAL GEAR ACTUATOR USED ON BUTTERFLY VALVES

DeZURIK AM-SERIES MANUAL GEAR ACTUATOR USED ON BUTTERFLY VALVES AM-SERIES MANUAL GEAR ACTUATOR USED ON BUTTERFLY VALVES Instruction D10501 January 2015 Instructions These instructions provide information about AM-Series Manual Actuators used on Butterfly Valves. They

More information

OWNER'S MANUAL VX141MS - MASONRY SAW PEARL ABRASIVE CO. - VX141MS MASONRY SAW

OWNER'S MANUAL VX141MS - MASONRY SAW PEARL ABRASIVE CO. - VX141MS MASONRY SAW OWNER'S MANUAL VX141MS - MASONRY SAW PEARL ABRASIVE CO. - VX141MS MASONRY SAW Air Filter Replacement...11 Electric Motor Specification...12 Do s and Dont s for Blades...13 Saw Maintenance...15 Optional

More information

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS D3109. REVISED vers10 BY: DSK 1/9/2015 TECH SUPPORT (800)

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS D3109. REVISED vers10 BY: DSK 1/9/2015 TECH SUPPORT (800) IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS D3109 REVISED vers10 BY: DSK 1/9/2015 TECH SUPPORT (800) 246-8132 AFTER INSTALL, PLEASE GIVE THIS BOOKLET TO YOUR CUSTOMER 1 Warnings Truck Bed and Camper

More information

UTV BLADE MOUNT HARDWARE

UTV BLADE MOUNT HARDWARE 1701 38TH AVE W PO BOX 257 SPENCER, IA 51301 PHONE: 712-262-4191 FAX: 712-262-0248 SERVICE: 800-841-2222 E-MAIL: ccac@cyclecountry.com UTV BLADE MOUNT HARDWARE For the KUBOTA RTV900 OWNER S MANUAL MODEL

More information

READ ME FIRST! IMPORTANT WARNING! ENG. Roof top tent

READ ME FIRST! IMPORTANT WARNING! ENG. Roof top tent Roof top tent ENG TENT031 220 min READ ME FIRST! Thank you for purchasing a Front Runner Roof Top Tent. Before you start, take a moment to familiarize yourself with these Fitting Instructions and the components

More information

LDR Brachytherapy Seed Sterilization and Sorting Tray

LDR Brachytherapy Seed Sterilization and Sorting Tray LDR Brachytherapy Seed Sterilization and Sorting Tray Table of Contents General Precautions... 2 Customer Responsibility... 3 Description... 4 Features and Specifications... 5 Operation... 6 Changing Covers

More information

NEWMAR SERVICE SCHOOL

NEWMAR SERVICE SCHOOL NEWMAR SERVICE SCHOOL TRAINING INFORMATION GUIDELINE FOR FEBRUARY 2013 OUR PRODUCTS: NOVA DUAL PITCH AWNING G-2000/ G-1500 2 P a g e G-2085 G-5000 3 P a g e G-LINKS 4 P a g e NOVA/ G-2000/ G-1500 BASIC

More information

80070 TOP MOUNT CAMPER SHELL and TRANSIT CONNECT RACK TMCS_3:1

80070 TOP MOUNT CAMPER SHELL and TRANSIT CONNECT RACK TMCS_3:1 ASSEMBLY INSTRUCTIONS for : 80070 TOP MOUNT CAMPER SHELL and TRANSIT CONNECT RACK TMCS_3:1 (916) 638-8703 (800) 343-7486 11261 Trade Center Drive Rancho Cordova, CA 95742 www.kargomaster.com Transit ASSEMBLY

More information

INSTRUCTIONS INSTALLATION UNIVERSAL SERIES PATIO AWNING HARDWARE , , ,

INSTRUCTIONS INSTALLATION UNIVERSAL SERIES PATIO AWNING HARDWARE , , , RECORD THIS INFORMATION FOR FUTURE REFERENCE: Model Number Serial Number Hardware Model Number Hardware Serial Number Date Purchased Retailer / Qualified Installer INSTALLATION INSTRUCTIONS UNIVERSAL SERIES

More information

Instructions for use. Bure. Walker. Bure Standard GAS Bure S GAS Form #2-245 Rev. 8/15/18

Instructions for use. Bure. Walker. Bure Standard GAS Bure S GAS Form #2-245 Rev. 8/15/18 Instructions for use Bure Walker Bure Standard GAS 56-311 Bure S GAS 56-301 Form #2-245 Rev. 8/15/18 Dear User, Congratulations on obtaining a Bure Walker! These instructions provide important information

More information

Strut Clamp Pipe & Conduit

Strut Clamp Pipe & Conduit PRODUCT SPECIFICATIONS 0F Strut Clamp Pipe & Conduit Size: Steel pipe sizes 2" through 0" Finish: Electro-Galvanized Pipe clamps are designed to fit into the opening of 5 /8" wide channel profiles Pre-Assembled

More information

HEAVY-DUTY LIFTING CHEST

HEAVY-DUTY LIFTING CHEST LIFTING SOLUTIONS HEAVY-DUTY LIFTING CHEST Grip-Rite Lifting Channel for Easier Opening Designed for premium access, weather resistance, and durability, the JOBOX heavy-duty chest now has four recessed

More information

Phantom Retractor System Overview

Phantom Retractor System Overview Spine Phantom Retractor System Overview Minimally invasive procedures Dual-directional expandable retractor 30 degree pivoting blades Fiber-optic light source for better visualization Key Design Features

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Serial Number Fork Positioner 45D-FPB-0AR0 corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com Cascade is a Registered Trademark of

More information

The safe & affordable install

The safe & affordable install QSLG1000 Quick-Sling SPECS QSLG1000 Each arm attaches to wood using 2 zip screws for stability & a 4 through bolt & wing nut for security. Installs to steel using steel beam adapters. 28 points of anti-vibration

More information

INSTRUCTION MANUAL ALEKO RETRACTABLE AWNING

INSTRUCTION MANUAL ALEKO RETRACTABLE AWNING INSTRUCTION MANUAL for ALEKO RETRACTABLE AWNING www.alekoproducts.com FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY! 1 Important Safety Precautions WARNING NOTE: FOR PERSONAL SAFETY,

More information

Mixer Blade Sets of Parts and Installation Procedure Using Epoxy

Mixer Blade Sets of Parts and Installation Procedure Using Epoxy Mixer Blade Installation Procedure Important Safety Notice STAY CLEAR OF MIXER UNTIL MIXER IS OFF, MAIN PANEL IS LOCKED OUT, AND ALL MIXER COMPONENTS' MOTIONS ARE STOPPED. FOLLOW STANDARD SAFETY PROCEDURES

More information

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C4201. REVISED Version7 BY: JL 8/6/2015 TECH SUPPORT (800)

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C4201. REVISED Version7 BY: JL 8/6/2015 TECH SUPPORT (800) IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C4201 REVISED Version7 BY: JL 8/6/2015 TECH SUPPORT (800) 246-8132 AFTER INSTALL, PLEASE GIVE THIS BOOKLET TO YOUR CUSTOMER 1 Warnings Truck Bed and Camper

More information

ASSEMBLY & CARE INSTRUCTIONS

ASSEMBLY & CARE INSTRUCTIONS ASSEMBLY & CARE INSTRUCTIONS 7 x TRAILER TENT SERIES 3 9 Part No. FT3711 - on road FT3923 - off road OPTIONAL SUNROOM Wall and floor kit Part No. FT3723 - on road FT39 - off road OPTIONAL SPARE ROOM Roof,

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Serial Number Multi-Purpose Clamp 35D-MCS-159 corporation To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet:

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model 50D Bale Clamp Serial Number 50D-BCS-64AR0 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Cascade is a Registered Trademark

More information

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS FRONT TIEDOWNS CHAIN AND CLEVIS REMOVED

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS FRONT TIEDOWNS CHAIN AND CLEVIS REMOVED IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2205/FMTPJ01NDCHSB FRONT TIEDOWNS CHAIN AND CLEVIS REMOVED 07.06.2011 Minor movement (or settling) can occur in some incidental harsh driving conditions

More information