Reading Writing Center

Transcription

1 RC01 Reading Writing Center ssembly uide RC01_00_018_ Check out our other products online at or assistance, please contact us: mail Have your packing slip ready for reference WRNIN Ÿ Ÿ Ÿ This product is meant to be assembled by an adult. In its unassembled state, small parts present a hazard. To be used under direct supervision of an adult. RC01 - SIC RIN WRITIN CNTR - PRMIUM ROYL RIN WRITIN CNTR NOT: If you purchased the RC01 you should have boxes: 1x -0 (main frame box) 1x -C (tub pack) If you purchased the you should have 4 boxes: 1x -0 (main frame) x -C (tub pack) 1x -1 (premium frame) Please Recycle RC01_00 - Version - Released January 6, Copernicus ducational Products Inc.

2 RC01 Reading Writing Center ssembly uide RC01_00_018_ Check out our other products online at or assistance, please contact us: mail Have your packing slip ready for reference ear ducator, Thank you for purchasing one of our products. I hope that your Reading Writing Center is useful in your classroom. If you have any questions, concerns, or ideas please contact us by telephone at or at info@copernicused.com. njoy using your new product and happy teaching. Jim Phillips Chief Cook and ottle Washer We do not inherit the Change is the end result What you leave behind is ducation is the most earth from our ancestors, of all true learning. not what is engraved in powerful weapon which we borrow it from our children. LO USCLI stone monuments, but what is woven into the you can use to change the world. NORTH MRICN PROVR lives of others. PRICLS NLSON MNL Life Time rame Warranty Life Time Tub Warranty 5 Year ook older Warranty Validate Your Warranty To validate your warranty, submit the ON-LIN form at nter a draw to win a Copernicus Product for your classroom at the same time! rame RC01_00 - Version - Released January 6, Copernicus ducational Products Inc.

3 Warning! Hazard Risks! Please read the warnings below for important safety information regarding your product. ailure to read these warnings or to follow the instructions below could result in personal injury or damage to your product that could void your warranty. Small Parts In its unassembled state, this product contains parts that can be hazardous to small children. This product should be assembled by an adult. dult Supervision This product is to be used under the supervision of an adult. This product is intended for indoor use only. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The internal components are not sealed from the environment. Indoor Use Only Power Strip Specifications Read your power strip electrical specifications. Only plug in devices that are approved for use with this power strip. Connect the supplied power strip directly to a wall outlet. o not connect to another power strip or use an extension cord. Unplug when not in use. o not leave this product plugged in for more than 7 consecutive hours. Turn off power strip before unplugging. lectronic quipment Read the electrical specifications of any electronic equipment you are using with your Copernicus products. ailure to read these specifications and follow their instructions could result in damage to your equipment or personal injury. nsure that any cables extending across the floor to your product are properly bundled and marked to avoid tripping or falling which may lead to personal injury. Cable Trip Hazard o not install or use the electrical components of this unit during a lightning storm. lectrical Shock o not climb on, hang from or suspend objects from any components of your product unless otherwise specified. Climb Hazard RC01_00 - Version - Released January 6, Copernicus ducational Products Inc. 3

4 RC01 asic Reading Writing Center efore beginning, you should have: dditional tools required: Philips Head Screwdriver -0 -rame Left -rame Right Chart Paper Loop Hook Chart Paper Peg Hook M6 x 35mm Screw x8 Hardware ctual Size Lower rame Tub Rack M6 x 30mm Screw Whiteboard Ultra Safe ook Ledge Short Stretcher - 635mm Long Stretcher - 718mm Magnetic Marker Holder In ox 1 C M6 x 5mm Screw M4 x 19mm Screw M6 Lock Nut x8 3 Twin Wheel Locking Caster Whiteboard Channel M6 Lock Washer x8 Tub Pack Open Tub x3 (CC4068) Small Tub (CC4070) Chart Paper Hang Tags 0 M4 Lock Nut 8mm/10mm Hex Wrench Not to Scale: 7mm Hex Wrench llen Key 10 lbs Weight Limit 5 lbs Weight Limit RC01_00 - Version - Released January 6, Copernicus ducational Products Inc. 4

5 Premium Royal Reading Writing Center efore beginning, you should have: dditional tools required: Philips Head Screwdriver -0 -rame Left -rame Right Chart Paper Loop Hook Chart Paper Peg Hook M6 x 35mm Screw x8 Hardware ctual Size Lower rame Tub Rack M6 x 30mm Screw Whiteboard Ultra Safe ook Ledge Short Stretcher - 635mm Long Stretcher - 718mm Magnetic Marker Holder In ox 1 C M6 x 5mm Screw M4 x 19mm Screw M6 Lock Nut x8 3 Twin Wheel Locking Caster Whiteboard Channel M6 Lock Washer x8 Tub Pack Open Tub x3 (CC4068) Small Tub (CC4070) Chart Paper Hang Tags 0 M4 Lock Nut 8mm/10mm Hex Wrench Not to Scale: 7mm Hex Wrench llen Key 10 lbs Weight Limit 5 lbs Weight Limit -1 Tub Rack Shelf ssembly ook older - Small ook older - Large M6 x 30mm Screw Hardware ctual Size M4 x 19mm Screw ack Wire Rods Tiny Tub x6 (CC407) Magnetic Marker Holder In ox M6 Lock Nut M4 Lock Nut H M6 lat Washer RC01_00 - Version - Released January 6, Copernicus ducational Products Inc. 5

6 Tips for ssembly Watch for These Helpful Symbols This symbol denotes a - or 3- Person Task. or safety, please ensure that there are the suggested number of people working on steps displaying this symbol. -Person Task Watch for this symbol throughout the ssembly uide. Wherever you see it, pay close attention. The symbol denotes a step needing extra attention to ensure it is done correctly. The star symbol highlights an advisory note. efore You egin Lay out and identify all of the included parts. The hardware has been packed according to step. Read the assembly guide over once to familiarize yourself with them. Please note that in its unassembled state, this product contains parts that can be hazardous to small children. This product should be assembled by an adult. s You ssemble the Unit ollow the steps in sequence. efore beginning each step, find the part(s) that you need for that step. Pay attention to the labels on the parts; they are there to help direct you at certain stages. The title of each step states what you will be doing. Review the text and the pictures as you build the unit. Customer Service - Q s??? or missing parts and other issues regarding this product: Please call Copernicus Customer Service, where we will be happy to help Monday - riday 8:30am - 4:30 pm ST. Need Tech Support? Have a Question? OR mail our Tech Support Service at info@copernicused.com mail our Tech Support Service Check out some of our other great products! RC01_00 - Version - Released January 6, Copernicus ducational Products Inc. 6

7 1 ctual Size: M6 x 35mm Screw M6 Lock Washer llen Key Lower rame Short Stretcher - 635mm uild Lower rame ssembly Note: HN TIHTN ONLY, O NOT ULLY TIHTN STNRS UNTIL STP 4 IS COMPLT. 1 asten Stretchers to irst Lower rame asten Second Lower rame to Stretchers channels must be pointing in toward the stretchers 3 Twin Wheel Locking Caster Install Casters onto Lower rame ssembly 1 lip Lower rame ssembly Over Install Casters and then lip ack Upright CLICK! RC01_00 - Version - Released January 6, Copernicus ducational Products Inc. 7

8 3 -rame Left -rame Right Install -rames onto Lower rame ssembly 1 it ack Side of -rames onto Lower rame it ront Side of -rames onto Lower rame Note: nsure the -rames are positioned as shown with the channels facing inward. Channels acing In Move top part of the Lower rames back and forth to help fit the -rame Tube over top of the Lower rame connector tube. RC01_00 - Version - Released January 6, Copernicus ducational Products Inc. 8

9 4 ctual Size: C M6 x 5mm Screw RC01 ONLY M6 Lock Nut llen Key 8mm/10mm Hex Wrench asten -rames to Lower rame asten both -rames to the Lower rames. C C C C C C Note: fter bolting -rames to Lower rames, fully tighten all fasteners from previous steps. 4 ctual Size: M6 x 30mm Screw M6 Lock Nut llen Key ONLY H M6 lat Washer Hardware packed in box -1 8mm/10mm Hex Wrench ONLY Shelf ssembly asten -rames to Lower rame asten the Shelf and both -rames to the Lower rames. H H H -Person Task H H Note: fter bolting -rames and Shelf to Lower rames, fully tighten all fasteners from previous steps. RC01_00 - Version - Released January 6, Copernicus ducational Products Inc. 9

10 5 ctual Size: M4 x 19mm Screw M4 Lock Nut Tub Rack 7mm Hex Wrench NOT INCLU Philips Head Screw river Install Top Tub Racks 1 Slide Tub Racks Into Upper Channels Install Tub Rack Hardware On the RC01 you can install the Tub Racks in the upper or lower channels to suit your needs. Note: Two nuts and two bolts per rack. o not over tighten fasteners. Upper Position Upper Position OR OR Lower Position Lower Position Tub Rack astener Placement (Top View) nsure middle wire is pointing down when installing Tub Racks Channel 5 ONLY ctual Size: M4 x 19mm Screw Hardware packed in box -1 M4 Lock Nut Tub Rack 7mm Hex Wrench NOT INCLU Philips Head Screw river Install ottom Tub Racks 1 Slide Tub Racks Into ottom Channels Install Tub Rack Hardware Note: Two nuts and two bolts per rack. o not over tighten fasteners. nsure middle wire is pointing down when installing Tub Racks ollow astener Placement diagram from above. RC01_00 - Version - Released January 6, Copernicus ducational Products Inc. 10

11 6 ONLY ack Wire Rods Install ack Wire Rods into Holes in -rames 1 Start with the Lowest Hole Position (Hole 5) Continue rom ottom to Top (4,3,) Person Task lex the -rames outward at the top to help get the ack Wire Rods Installed. Installing the first ack Wire Rod (in hole position 5) may be difficult for some people to do on their own. Please ask someone to help you with this step. 7 ctual Size: M6 x 35mm Screw M6 Lock Washer Long Stretcher - 718mm Install Top Stretcher into Top Hole (Hole 1) on the ack Side of the -rames RC RC01_00 - Version - Released January 6, Copernicus ducational Products Inc. 11 4

12 ctual Size: M6 x 30mm Screw 8 M6 Lock Nut Whiteboard Channel llen Key 8mm/10mm Hex Wrench LCK OM INSI Install ottom Whiteboard Channel Note: Use the Whiteboard Channel with black foam strips inside the channel. nsure the tabs on the ends of the Whiteboard Channel are pointing OWN. 1 lign Whiteboard Channel with holes asten Whiteboard Channel To rames on Left and Right rames 9 Whiteboard Install Whiteboard Into -rames Caution: Please be careful when handling the Whiteboard as the corners and edges can be sharp. 1 Remove protective film from Whiteboard Slide Whiteboard into channels on -rames RC01_00 - Version - Released January 6, Copernicus ducational Products Inc. 1

13 10 ctual Size: M6 x 30mm Screw M6 Lock Nut Whiteboard Channel llen Key 8mm/10mm Hex Wrench Install Top Whiteboard Channel 1 lign Whiteboard own Channel with asten Whiteboard Channel To rames holes on Left and Right -rames PRSS OWN Note: nsure the tabs on the ends of the Whiteboard Channel are pointing UP. Note: Press down on whiteboard channel to align holes and insert fasteners. 11 ctual Size: M6 x 35mm Screw M6 Lock Washer Long Stretcher - 718mm llen Key Install Top Stretcher on the ront Side of the -rames RC01_00 - Version - Released January 6, Copernicus ducational Products Inc. 13

14 1 ONLY ook older - Large ook older - Small Install ook olders on ack Wire Rods Using Hook and Loop Tabs 1 Install Large ook older Install 1st Small ook older 3 Install nd Small ook older NOT: To install book folders, fold tabs over ack Wire Rods and press the hook and loop strips together firmly. Repeat for top and bottom tabs of each book folder. 13 RC01 Open Tub x3 Small Tub 10 lbs Weight Limit 5 lbs Weight Limit OR Open Tub x6 Small Tub 10 lbs Weight Limit 5 lbs Weight Limit Install Open Tubs RC01 RC01_00 - Version - Released January 6, Copernicus ducational Products Inc. 14

15 14 Ultra Safe ook Ledge Install Ultra Safe ook Ledge Hook the ends of the Ultra Safe ook Ledge Onto the asel with the Chrome Hooks Chart Paper Chart Paper 15 Loop Hook Peg Hook Install Chart Paper Loop Hooks Install Chart Paper Peg Hooks RC01_00 - Version - Released January 6, Copernicus ducational Products Inc. 15

16 Tiny Tub 16 x6 ONLY Place Tiny Tubs on Rack ehind White oard 17 RC01 Magnetic Marker Holder OR Magnetic Marker Holder RC01 Install Magnetic Marker Holder Install Magnetic Marker Holders RC01_00 - Version - Released January 6, Copernicus ducational Products Inc. 16

17 18 Chart Paper Hang Tags 0(RC01) 0() Install Chart Paper Onto Chart Paper Hooks 1 Remove acking rom Hang Tags Press Hang Tags on Chart Paper (not included) Make sure the hang tags are spaced evenly from center of chart paper. 3 Use irst Completed Chart Paper 4 Hang Chart Paper on Chart Paper Peg Hooks as Positioning Template or the Rest RC01_00 - Version - Released January 6, Copernicus ducational Products Inc. 17