ASSEMBLY INSTRUCTIONS

Size: px

Start display at page:

Download "ASSEMBLY INSTRUCTIONS"

Adelia Cameron
5 years ago
Views:

ASSEMBLY INSTRUCTIONS NT-MG1158 58" Glass

1 ASSEMBLY INSTRUCTIONS NT-MG " Glass and Metal TV Stand Safety information and specifications...2 Tools needed...3 Parts...3 Hardware...4 Assembly instructions...5

Safety information and specifications CAUTION: This stand s glass work surface is intended only for use with a product not weighing more than 300 lbs.

2 Safety information and specifications CAUTION: This stand s glass work surface is intended only for use with a product not weighing more than 300 lbs. (136 kg) and having a width that will permit it to sit evenly on the stand with no more than a one-inch overhang on each side on the top shelf. Using with other products, including products that weigh more than the maximum weight allowed or extend beyond the maximum width, may result in instability, which may cause possible injury. Caution: This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children! Do not lift the glass by the support posts. See instructions for more details. Model #: NT-MG1158 Distributed by Best Buy Purchasing, LLC Manufacturer: Alart, Inc. Manufacture Date: Maximum weight: 300 lbs. (136 kg) Maximum width: 1-inch overhang on each side of the top shelf Overall dimensions (W H D): " ( cm) Top shelf (W D): 58 20" ( cm) Middle shelf (W H D): " ( cm) Bottom shelf (W H D): " ( cm) 20" (50.8 cm) 38" (96.52 cm) 58" ( cm) 24" (60.96 cm) 54.5" ( cm) 2

3 Tools needed For installing the optional tipping restraint hardware Phillips screwdriver Drill Parts Package contents: parts A Stand body(1) C Middle glass shelf (1) D Bottom glass shelf (1) B Top glass shelf (1) J Rear support bar (1) 3

4 Hardware Package contents: hardware Note: You may receive extra hardware. Make sure you have all the hardware necessary to assemble your new TV stand: Label Hardware Qty. Large thumbscrew E 2 Label Hardware Qty. I T-shaped shelf lock 1 F Locking peg 2 Medium K thumbscrew 1 Small G thumbscrew 2 Large suction L cups 2 H Rubber pad 2 Small suction M cups 3 An optional anti-tipping hardware kit is included. Instructions on how to install the hardware are included on the bag containing the kit in mm 4

5 Step 1 Assembly instructions Unfold the stand body (A), then insert and tighten two large thumbscrews (E) into the right side of the rear panel. You ll need: E (2) 5

6 Step 2 Attach the rear support bar (J) to the top metal frame with the medium thumbscrew (K). Insert the two locking pegs (F) into the bottom side of the top glass shelf (B). You ll need: K (1) F (2) 6

7 Step 3 Turn the top shelf over and align the locking pegs with the holes in the top of the back support frame and align the metal pegs with holes in the side of the frame. Lock the locking pegs in place by rotating the peg heads to face the back. 7

8 Step 4 Secure the top shelf to the steel frame with the small thumbscrews (G) and attach two rubber shelf pads (H). Insert two large suction cups (L) and three small suction cups (M). You ll need: G (2) H (2) L (2) M (3) 8

9 Step 5 Install the remaining shelves (C and D). Lock the middle shelf (C) into place with the T-shaped shelf lock (I). You ll need: I (1) 9

10 Step 6 Optional: Install the tipping restraint hardware. You need to remove the top thumbscrew, place the loop on the tipping restraint over the thumbnail screw hole, then replace the thumbscrew. You ll need: Phillips screwdriver Drill For customer service, call: (U.S./Canada markets) 10

11 11

www.initproducts.com Distributed by Best Buy Purchasing, LLC 7601 Penn Ave. South, Richfield, MN 55423 U.S.A. 2011 BBY Solutions, Inc., All Rights Reserved.

12 Distributed by Best Buy Purchasing, LLC 7601 Penn Ave. South, Richfield, MN U.S.A BBY Solutions, Inc., All Rights Reserved. Init is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners ENGLISH

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS NT-MG302FMS 56" TV Stand Safety information and specifications...2 Tools needed...3 Parts...3 Hardware...4 Assembly instructions...5 Safety information and specifications CAUTION: