Section N Micro-D Uni-Saver, Hardware and Accessories
|
|
- Joella Hamilton
- 5 years ago
- Views:
Transcription
1 Section Micro-D Uni-Saver, Hardware and ccessories Micro-D ccessories product selection guide Micro-D Uni-Saver lways in stock,these feed-thru pin-socket adapters feature an innovative design using a single machined aluminum housing. Fully EMI protected, Uni-Savers protect expensive equipment from damage during testing and burn-in. vailable in all sizes. Micro-D Plastic Dust Caps lways in stock,these anti-static black LDPE dust caps protect Micro- D connectors from debris and damage. ll Glenair Micro-D connectors are furnished with these dust caps; however, these caps may be purchased separately for replacements. Uni-Saver Page -2 Dust Caps Page -4 Micro-D Metal Protective Covers These aluminum covers provide complete mechanical and environmental protection. silicone gasket assures water-tight sealing. variety of attachment styles are available. Metal Covers Page -5 ean Rubber Covers For protection of Micro-D's used in tactical equipment, these synthetic rubber covers are friction-fit and attach with nylon cord and ring terminals. Rubber Covers Page -7 Shorting dapters Combining a switching backshell and a Micro-D connector, these assemblies have all contacts shorted to each other. These shorting plugs provide ESD protection to sensitive instrumentation. Shorting dapters Page -3 Jackscrew Kits These stainless steel kits are compatible with standard Micro-D connectors and meet the requirements of MIL-DTL Jackscrews are available with slot heads or hex heads. Choose low profile or extended length versions. Jackscrew Kits Page -8 Jackpost Kits Jackposts are available in various lengths to fit front and rear panel mounted connectors. These stainless steel jackposts fit all standard Micro-D connectors. Interfacial Seals Replace damaged Micro-D socket connector interfacial seals with new ones. Sometimes these seals can tear or be contaminated. Held in place by an interference fit with the contacts, damaged seals can be removed with tweezers. Jackpost Kits Page -10 Interfacial Seals Page Glenair, Inc. U.S. CGE Code Printed in U.S.. GLEIR, IC IR WY GLEDLE, C FX
2 Micro-D ccessories Sav-Con Saver MWDM2L Compact Size reduces stress on mating connectors. In Stock, o Waiting ll standard Uni- Saver sizes are in stock (9, 15, 21, 25, 31, 37, 51 and 100 pin). EMI Protected one piece shell. materials & Finishes luminum lloy T6 Shell Electroless ickel Plated Contacts Gold-Plated Copper lloy Encapsulant Epoxy Insulators Glass-Filled LCP Hardware 300 Series Stainless Steel, Passivated Protect Expensive Equipment With Glenair's Micro-D Uni-Saver These connector savers feature a one-piece aluminum housing, TwistPin contacts and locking hardware. Typical applications include test equipment and space-grade instruments. The Uni-Saver prevents wear and tear on sensitive gear. Standard Uni-Savers are electroless nickel plated. Other plating finishes are available on request. C SOCKET PI J D E F.500 (12.70) H #2-56 UC THDS 9-69 PI #4-40 THDS 100 PI K Size Part umber Max. C Max. D Max. E Max. F H Max. J Max. K Max In. mm. In. ±.003 mm. ±0.08 In. mm. In. mm. In. mm. In. ±.003 mm. ± 0.08 In. mm. In. mm. In. mm. 9 MWDM2L-9USP MWDM2L-15USP MWDM2L-21USP MWDM2L-25USP MWDM2L-31USP MWDM2L-37USP MWDM2L-51USP MWDM2L-51-2USP MWDM2L-67USP MWDM2L-69USP MWDM2L-100USP Glenair, Inc. U.S. CGE Code Printed in U.S.. GLEIR, IC IR WY GLEDLE, C FX
3 Shorting Plug ssembly Micro-D ccessories Shorting Plug ssemblies are Micro-D connectors with all contacts bussed/ shorted together. Enclosed in a backshell and fitted with jackscrews, these shorting plugs provide ESD protection to sensitive instrumentation. materials & Finishes Shells luminum lloy T6 Contacts Gold-Plated Copper lloy Encapsulant Epoxy Insulators Glass-Filled LCP Interfacial Seal Fluorosilicone Hardware 300 Series Stainless Steel, Passivated Series Size HOW TO ORDER Shorting plugs Contact Type Shell Finish Hardware Option Lanyard Option P Pin S Socket 1 Cadmium, Yellow Chromate 2 Electroless ickel 4 lack nodize 5 Gold 6 Chem Film Fillister Head Jackscrew H Hex Head Jackscrew E Extended Jackscrew F Jackpost, Female o Hardware Sample Part umber o Lanyard G Flexible ylon Rope F Wire Rope, ylon Jacket H Wire Rope, Teflon Jacket Lanyard in One Inch Increments Example: 6 equals six inches. Ring Terminal Ordering Code (3.2) (3.6) (4.2) (5.0) I.D. of Ring Terminal S 2 H F 4 06 F LEGTH SEE ORDERIG IFO C D E #2-56 UC THDS PI #4-40 UC THDS. 100 PI CODE FILLISTER HED JCKSCREW CODE H HEX HED JCKSCREW CODE F FEMLE JCKPOST CODE E EXTEDED JCKSCREW Max. Max. C D Max. E Max. F Max. Size In. mm. In. mm. In. mm. In. mm. In. mm. In. mm Glenair, Inc. U.S. CGE Code Printed in U.S.. GLEIR, IC IR WY GLEDLE, C FX
4 Micro-D ccessories nti-static Thermoplastic Dust Caps and Fluorosilicone Interfacial Seals TI-STTIC DUST CPS nti-static Dust Caps offer protection to Micro-D connectors for storage and handling. Molded in black thermoplastic LDPE, these caps meet the anti-static decay rate specified in MIL-PRF D. UL 94-V0 rated, self-extinguishing MWDM Metal Shell s MLDM and MWDL Metal Shell s Ref. Ref. Ref. Ref. Part umber Layout In. mm. In. mm. Part umber Layout In. mm. In. mm P P P P P P P P P P P P P P P S P S P S P S S S S S S S S S S S S S S S and (7.01) 2XR(.078) XR(.080) and and and Interfacial Seals for Metal shell micro-d socket connectors Replacement Interfacial Seals fit Micro-D metal shell socket connectors. These blue fluorosilicone seals allow replacement of damaged seals. Ref. Ref. Layout Part umber In. mm. In. mm. 9S S S S S S S S Glenair, Inc. U.S. CGE Code Printed in U.S.. GLEIR, IC IR WY GLEDLE, C FX REV 20 PRIL 2011
5 Metal Protective Covers with Silicone Rubber Gaskets and Micro-D ccessories Choose Metal Protective Covers for full environmental protection. Silicone Rubber Gasket provides a watertight seal. Use with M83513 Type Metal Shell Micro-D s materials & Finishes Shell luminum lloy T6 Gasket Silicone Rubber Hardware 300 Series Stainless Steel, Passivated select a protective cover style Style 1 Style 2 Style 3 Tapped Threads Silicone Gasket (ll Styles) Panel Use With Micro-D s With Jackposts ot for rear panel mounted connectors. Use With Micro-D s With Jackscrews Use With Rear-Panel Mounted Micro-D s HOW TO ORDER style 1 and Style 2 protective covers Series Shell Finish Size Hardware Option Lanyard Option Lanyard Ring Terminal Ordering Code C lack nodize E J M Chem Film Cadmium, Yellow Chromate Electroless ickel F Cadmium, Olive Drab Z2 Gold STYLE 1 Fits Micro-D's With Jackposts Cover has Jackscrews M Fillister Head Jackscrew MH Hex Head Jackscrew STYLE 2 o Lanyard G Flexible ylon Rope F Wire Rope, ylon Jacket H Wire Rope, Hi-Temp Teflon Jacket in One Inch Increments Example: 6 equals six inches (3.2) (3.6) (4.2) (5.0) I.D. of Ring Terminal Fits Micro-D's With Jackscrews Cover has Tapped Female Threads F Female Threads (STYLE 3: see next page) Sample Part umber M 25 M F Glenair, Inc. U.S. CGE Code Printed in U.S.. GLEIR, IC IR WY GLEDLE, C FX
6 Micro-D ccessories Metal Protective Covers with Silicone Rubber Gasket and Series HOW TO ORDER style 3 protective covers for rear mount connectors Shell Finish C lack nodize E J M Chem Film Cadmium, Yellow Chromate Electroless ickel F Cadmium, Olive Drab Z2 Gold Size Panel Thickness Option R1.031 (0.79) Panel R2.047 (1.19) Panel R3.062 (1.57) Panel R4.093 (2.36) Panel Panel Sample Part umber Hardware Option Lanyard Option STYLE 3 Fits Micro-D's With Jackposts Fillister Head Jackscrew H Hex Head Jackscrew o Lanyard G Flexible ylon Rope F Wire Rope, ylon Jacket H Wire Rope, Hi- TempTeflon Jacket Ring Terminal Ordering Code (3.2) (3.6) (4.2) (5.0) I.D. of Ring Terminal J 31 R4 G 06 protective cover dimensions Style 1 Style 2 Style 3 D C C E C RIG TERMIL DI. RIG TERMIL DI. F RIG TERMIL DI..410 (10.4) MX.310 (7.9) MX.260 (6.6) MX #2-56 UC THREDS SIZES 9-69 #4-40 UC THREDS SIZE 100 #2-56 UC THREDS SIZES 9-69 #4-40 UC THREDS SIZE 100 #2-56 UC THREDS SIZES 9-69 #4-40 UC THREDS SIZE 100 For Micro-D s With Jackposts For Micro-D s With Jackscrews For Rear-Panel Mounted Micro-D Max. Max. C D Max. E Max. F Size In. mm. In. mm. In. mm. In. mm. In. mm. Panel Thickness In. mm R R R R Glenair, Inc. U.S. CGE Code Printed in U.S.. GLEIR, IC IR WY GLEDLE, C FX
7 Marshal ean Protective Rubber Covers with Tether Rope Micro-D ccessories Fits Metal Shell M83513 Type s Rubber Covers for Tactical Equipment and Field Instruments These friction-fit covers provide dust and splash protection. Two Tether Styles Choose ring terminals for attachment to a panel, or choose slip knots for cable attachment. -55 to +125 Temperature Range materials & Finishes Cover Cord Ring Terminal Slip Collar Crimp Ring SR Rubber Per STM D2000 Type C ylon Per MIL-C Stainless Steel Kynar Copper, lack Oxide Finish HOW TO ORDER rubber protective covers Series Layout P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S 67P 67S 69P 69S 100P 100S ylon Cord Option Omit (leave blank) Cover only, no cord G ylon Cord ylon Cord in One Inch Increments Example: 6 equals six inches. ±.250 Inches ± 6.35 mm Ring Terminal (3.2) I.D (3.6) I.D (4.2) I.D (5.0) I.D. SK Slip Knot ttachment Option Sample Part umber P G 4 SK Rubber Type Omit Standard Rubber C Conductive Rubber.40 (10.2) LEGTH.25 (6.4) MX.310 (7.9) MX RIG TERMIL LEGTH DETERMIED T.50 (12.7) DI. Layout Max. Max. In. mm. In. mm. 9P, 9S P, 15S P, 21S P, 25S P, 31S P, 37S SLIP KOT Layout Max. Max. In. mm. In. mm. 51P, 51S P, 51-2S P, 67S P, 69S P, 100S Standard material contains trace amounts of sulfur (a vulcanizing agent) which is known to contribute to degradation/corrosion of silver plated components such as braid, etc. Specify MOD Code suffix -675 for sulfur-free material Glenair, Inc. U.S. CGE Code Printed in U.S.. GLEIR, IC IR WY GLEDLE, C FX
8 Micro-D ccessories Stainless Steel Jackscrew Kits with E-Rings XX Mil Spec Jackscrew Kits feature 300 series stainless steel and easily attach to Micro-D connectors with an e-ring. Order One Kit Per. Each kit contains two jackscrews and e-rings. Packaged one kit (two screws) per bag. mil spec jackscrew kits Configuration Hex Head Low Profile Slot Head Low Profile Size, Thread Size Sizes 9 to 69 Contacts. Mil Spec Size to G #2-56 UC-2 Size 100 Only Mil Spec Size H #4-40 UC-2 Sizes 9 to 69 Contacts. Mil Spec Size to G #2-56 UC-2 Size 100 Only Mil Spec Size H #4-40 UC-2 Sizes 9 to 69 Contacts. Mil Spec Size to G #2-56 UC-2 Mil Spec Part umber Part umber Glenair Part umber M83513/ M83513/ M83513/ M83513/ M83513/ (1.57) HEX.125 (3.18) DI.103 (2.62) MX.062 (1.57) HEX.187 (4.75) DI Dimensions.083 (2.11) DI #2-56 UC (2.29) MI PERFECT THD.140 (3.56) DI.258 (6.55) MX #4-40 UC (2.79) MI PERFECT THD.098 (2.49).292 (7.41) MX.083 (2.11) DI #2-56 UC (2.29) MI PERFECT THD.125 (3.18) DI.103 (2.62) MX.258 (6.55) MX.140 (3.56) DI #4-40 UC (2.79) MI PERFECT THD.187 (4.75) DI.156 (3.96) DI MX.098 (2.49).062 (1.57) HEX.610 (15.49) MX.292 (7.41) MX.083 (2.11) DI #2-56 UC (2.29) MI PERFECT THD.258 (6.55) MX Hex Head Extended Size 100 Only Mil Spec Size H #4-40 UC-2 M83513/ (5.08) DI MX.062 (1.57) HEX.610 (15.49) MX.140 (3.56) DI #4-40 UC (2.79) MI PERFECT THD.292 (7.41) MX Sizes 9 to 69 Contacts. Mil Spec Size to G #2-56 UC-2 M83513/ (3.96) DI MX.610 (15.49) MX.083 (2.11) DI #2-56 UC (2.29) MI PERFECT THD.258 (6.55) MX Slot Head Extended Size 100 Only Mil Spec Size H #4-40 UC-2 M83513/ (5.08) DI MX.610 (15.49) MX.140 (3.56) DI #4-40 UC (2.79) MI PERFECT THD.292 (7.41) MX 2011 Glenair, Inc. U.S. CGE Code Printed in U.S.. GLEIR, IC IR WY GLEDLE, C FX
9 Stainless Steel Jackscrew Kits with C Clips XX Micro-D ccessories C CLIP JCKSCREW KITS C Clip Jackscrew Kits offer an alternative to e-ring jackscrew kits. The c clip fits over the flange and, unlike e-rings, cannot be dislodged in handling or use. Corrosion-Resistant Steel The clip is made from 17-7PH spring temper stainless steel. The jackscrew is made from 125 KPSI tensile strength stainless steel, passivated. Order Two Kits Per. Each kit consists of one jackscrew and one c clip. pplication ote: The magnetic permeability of the c clip exceeds the 2.0 µ maximum of MIL-DTL (5.21) (7.5) DD.300 (7.62) TO COECTOR DIM.295 (7.5) (56.39) MX.130 (3.3) #2-56 UC SIZES 9-69 C Clip for Size 9 to Size 69 Pin Micro-D.130 (3.3) #4-40 UC SIZE 100 C Clip for Size 100 Micro-D Part umber Jackscrew Type Thread Size Configuration Recommended Max.Torque Max. Weight In Grams (2 Kits) S Slot Head #2-56 UC 2.5 inch-pounds H Hex head #2-56 UC 2.5 inch-pounds S Slot Head #4-40 UC 4.0 inch-pounds H Hex head #4-40 UC 4.0 inch-pounds 1.5 Replacement hardware kits for c clip micro-d backshells Replacement Hardware Kits for Standard Series 50 Micro-D Corrosion-Resistant Steel The clip ackshells. is made from 17-7PH spring temper Order Two Kits Per. stainless steel. The jackscrew is Each Jackscrew kit consists of one made from 300 series stainless steel, jackscrew and one c clip. passivated. Fillister Head Jackscrew Hex Head Jackscrew Extended Jackscrew Jackpost Part umber Part umber Thread Size Part umber Thread Size (dash # = size) Overall Part umber Thread Size #2-56 (9-69 pin) #2-56 (9-69 pin) (32.3) #2-56 (9-69 pin) #4-40 (100 pin) #4-40 (100 pin) (35.6) #4-40 (100 pin) (38.6) (40.1) (41.7) (42.7) (43.3) (46.0) 2011 Glenair, Inc. U.S. CGE Code Printed in U.S.. GLEIR, IC IR WY GLEDLE, C FX
10 Micro-D ccessories Stainless Steel Jackpost Kits Standard Hex, Rear Panel or Rear Panel PC XX, X-X, X-X and X-X-X Rear Panel Mount Micro-D Jackpost Micro-D Jackpost Kits feature 300 series stainless steel. Select a style: standard hex posts, rear panel, or rear panel printed circuit board. Order One Kit Per. Each kit contains two jackposts. Jackpost General information 1. Material and Finish: Corrosion resistant steel in accordance with STM 484 and STM 582, passivated in accordance with STM Torque: #2-56 threads= 2.5 inch-pounds, #4-40 threads = 4.0 inch-pounds. Maximum recommended torque for installation and operation. 3. Standard Package: One kit consists of two jackposts, 2 washers and 2 nuts for styles 1 and 2. Style 3 kits contain two jackposts. One kit per bag. 4. pplication: Style 1 and 2 jackposts are compatible with any standard Micro-D connector. Style 3 jackposts for rear panel mounting Glenair printed circuit board connectors types S, R, and CR only. select a jackpost style Style 1 Style 2 Style 3 Use With Standard Solder Cup or Pigtail Micro-D s Use With Rear Panel Mounted Solder Cup or Pigtail Micro-D s Use With Rear Panel Mounted Printed Circuit oard Micro-D s STYLE 1 JCKPOST KITS Style 1 Jackpost Kits are standard kits for installation on all standard Micro-D connectors. Each kit contains two jackposts, two hex nuts and two lockwashers. Sizes (THDS) 9 69 M83513 sizes thru G (#2-56) 100 M83513 size H (#4-40) Mil Spec Part umber Glenair Part umber In. ±.015 M83513/ M83513/ mm. ± 0.4 Figure.190 /.185 (4.8 / 4.7).088 (2.2) MX.026 (0.7) MX.072 (1.8) MX.086 (2.2)-56 UC (3.2) HEX #2-56 Jackpost.086 (2.2)-56 UC-2 WSHER UT.154 (3.9) HEX.112 (2.8)-40 UC /.175 (4.7 / 4.4).088 (2.2) MX.031 (0.8) MX.072 (1.8) MX #4-40 Jackpost.187 (4.7) HEX.140 (3.6) ±.003 (0.1).112 (2.8)-40 UC-2 WSHER UT.187 (4.7) HEX 2011 Glenair, Inc. U.S. CGE Code Printed in U.S.. GLEIR, IC IR WY GLEDLE, C FX
11 Stainless Steel Jackpost Kits Standard Hex, Rear Panel or Rear Panel PC XX, X-X, X-X and X-X-X Micro-D ccessories STYLE 2 JCKPOST KITS for rear mounted connectors Style 2 Jackpost Kits are for rear panel mounted connectors. These round, slotted posts accommodate panel thickness from.031 inches (0.8 mm.) to.125 inches (3.2 mm.). Size (THDS) 9 69 M83513 sizes thru G (#2-56) 100 M83513 size H (#4-40) Panel Thickness In. mm. Part umber In. ±.003 mm. ± 0.08 Figure ±.015 (12.1 ± 0.4).026 (0.7) MX.072 (1.8) MX.156 (4.0) DI.050 (1.3).154 (3.9) HEX #2-56 Jackpost.187 (4.7) DI.188 ±.005 (4.8 ± 0.13).180 ±.005 (4.6 ± 0.13).086 (2.2)-56 UC ± (3.0) (12.1 ± 0.4).086 (2.2)-56 UC (0.8) MX LOCKWSHER.072 (1.8) MX UT #4-40 Jackpost.050 (1.3).112 (2.8)-40 UC (3.6) ±.003 (0.1).112 (2.8)-40 UC-2 WSHER UT.187 (4.7) HEX STYLE 3 JCKPOST KITS for Printed Circuit board connectors Style 3 Jackpost Kits are for rear panel mounted PC connectors. Select the right post by choosing the connector style (S, R and CR are the three standard PC connector configurations). Size (THDS) 9 69 M83513 sizes thru G (#2-56) 100 M83513 size H (#4-40) Style, Overall S, CR.365 (9.3) OL R.398 (10.1) OL R, CR.475 (12.1) OL S.360 (9.1) OL Panel Thickness In. mm. Part umber In. ±.003 mm. ± 0.08 Figure C C C C C D D D D D (4.0) DI.188 ±.005 (4.8 ± 0.13) OVERLL LEGTH.180 ±.005 (4.6 ± 0.13) OVERLL LEGTH #2-56 Jackpost #4-40 Jackpost.050 (1.3).086 (2.2)-56 UC (3.0).086 (2.2)-56 UC (4.7) DI.050 (1.3).112 (2.8)-40 UC (3.6) ±.003 (0.1).112 (2.8)-40 UC-2 For CS Style Circuit oard s See Catalog Page C Glenair, Inc. U.S. CGE Code Printed in U.S.. GLEIR, IC IR WY GLEDLE, C FX
12 Reliability! You Can Depend on Glenair Circular and Micro Edgeboard s. In Stock and Ready for ction! 1211 ir Way Glendale, California Telephone: Facsimile: U n i t e d S t a t e s U n i t e d K i n g d o m G e r m a n y o r d i c F r a n c e I t a l y S p a i n J a p a n
Smallest Connector with Removable Contacts
1 Ultra-Miniature 8STA Size 01 Connectors Smallest Connector with Removable Contacts Ultra compact design and very lightweight connector dedicated to the harshest of motorsport environments. Innovative
More informationtttttt www.wealdelectronics.com This publication is issued to provide outline information only and unless specifically agreed to the contrary by WEALD ELECTRONICS LTD. in writing, is not to form part of
More information2M804 Push-Pull Crimp Receptacles Ordering Guide for 2M , 002, 003, 004
Push-Pull Crimp Receptacles Ordering Guide for -001, 002, 003, 004 Micro38999 1. 2. 3. 4. 5. 6. 7. SERIES SHELL SERVICE SHELL SIZE-INSERT CONTACTS KEYING SUFFIX STYLE CLASS ARANGEMENT -00X -06 ZNU 6-7
More informationSouthco 64 Push-to-Close Latch Visible, Locking, Slide Bolt
Southco 64 Push-to-Close Latch, Locking, Slide olt 139.7 (5.50) 10.2 (.40) 108 (4.25) 4X Ø H RIVET LTCHES ONLY 22.6 (.89) Push-to-Close Latches 1.2 (.05) 45.1 (1.78) NON-LOCKING LOCKING* 23.4 (.92) TYPE
More information2M801 Dual-Start ACME Threads
Dual-Start ACME Threads Ordering Guide for 1. 2. 3. 4. 5. 6. SERIES SHELL STYLE SERVICE CLASS SHELL SIZE-INSERT AGGMT CONTACTS KEYING -007-01 C 5-3 P A 1. SERIES Type Part # Description PLUG CRIMP PCB
More information2M Hermetic General Information. Why 2M Hermetic? GHEC 81. Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard. Page Guide.
2M General Information Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard Averaging less than half the size and weight of their 38999 ancestors, Amphenol s 2M Micro38999 series are an
More informationCEELOK FAS-T CONNECTORS
CEELOK FAS-T CONNECTORS Small Form Factor, Field Terminable Connectors CeeLok FAS-T connectors ofer a small form factor, ield terminable I/O connector capable of 0 Gb/s Ethernet. Crimpsnap contacts enable
More informationAmphenol RF Interconnects TNC 31 Series Threaded Lock RF Connector System Materials
TNC 31 Series Threaded Lock RF Connector System Materials Body/Finish Contacts Centre MALE Centre FEMALE Insulator Gasket Crimp Ferrules* *Metal finishes Durability Brass/Nickel Brass/Gold Plated (Au)
More informationElectrical Specifications. Dimensions (inches)
Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power
More informationElectrical Specifications. Dimensions (inches)
Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power
More informationLSC19 Lighting Cable Assemblies and Connectors
PowerFLEX Cable Assemblies PowerPARTS Wiring Devices ISO 9001:2008 LSC19 Lighting Cable Assemblies and Connectors PowerFLEX and PowerPARTS Introducing a new generation of Lex Products 19 pin, 6-circuit
More informationSteel Flareless Ermeto Connectors
Ermeto onnectors PPITIO T Typical pplication: Hydraulic, instrumentation and chemical processing. Highly recommended for high pressure and high vibration applications. Tube O.. 1/8 3/16 1/4 5/16 3/8 1/2
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. One-piece connector body: Fastest assembly Field installable Anaerobic epoxy
More informationMS/Standard MS3450 wall mounting receptacle
MS3450 wall mounting receptacle Receptacle, lange Wall Mount, ed oupling Military No. MS3450 mphenol/matrix No. 9440 Typ. Typ. Key oupling lue olor and ccessory qually Placed 120 part Max 4 oles Typ. D
More informationEPIC Rectangular Connectors HBE 24 Plugs & Receptacles
HBE 24 Plugs & Receptacles HBE 24 SCREW & CRIMP TERMINATED INSERTS SCREW TERMINATED View from Cable Side CRIMP TERMINATED Contacts Sold Separately Description Screw Terminated with wire protection Screw
More informationI- 39. Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General Information and special features.
Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General nformation and special features. - 39 Seal out oil, water, dirt, dust and fumes wherever liquidtight flexible metal conduit
More informationD-SUB SERIES. Fast Locking System ESCC 3401/085. Features and Benefits. Typical Applications. Specification. Quality Level.
D-SUB SERIES Fast Locking System ESCC 3401/085 Features and Benefits Compliant with ESA specification 34010/085 No tool to fix connector No torque value measurement No indicator marking Visual control
More informationPARTS LIST eforce Burnisher
PARTS LIST eforce Burnisher HEAD ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 6496721 MOTOR 36 VOLT, 2100 RPM, 3.6HP [see pages 16,17] 1 102 9121410 5/16 EXTERNAL STAR LOCK WASHER PACK OF 10 2 103 6492051
More informationWARRENTY Void IF BROKEN 48,0 COMBINATIONS FIXED CYLINDER A A A A M = MASTER KEY SYSTEM: SUPPLIED TO ORDER ONLY
Coin Lock 264/265/268 COIN RETURN TRAY 33,2 113,5 0,0 18,0 28,8 FOR 264,265 & 269 19,0 FOR 268 26,2 16,5 13,5 34,0 6,0 WARRENTY Void IF BROKEN 48,0 32,5 15,4 18,0 Ø 6,5 9,8 3,0 Ø22,0 1,5 5,6 (RH) REMOVE
More information2-3-5 Valve Manifolds
2-3-5 Valve Manifolds range of Valve Manifolds offer a safe and economical method of installation to control and measure pressure of liquids and gaseous media. They are ruggedly manufactured and precision
More informationMilitary Circular MIL-C-5015 catalogue Product Index
BN: 69 002 691 241 Military Circular MIL-C-5015 catalogue Product Index Solder Connectors 5 Crimp Front Release Connectors 13 Crimp Rear Release Connectors 18 Insert Configuration Table 22 Orientation
More informationRussellstoll. Electrical Interconnection Systems. Dura-Gard Nonmetallic Waterproof Connections. The Next Generation: Dura-Gard
Dura-Gard Washdown Duty, Chemical, Outdoor, Industrial and Marine Use Nonmetallic Plugs, Connectors Receptacles and Inlets 20, 30 and, Maximum 600 VAC/250 VDC The Next Generation: Dura-Gard Severe environments
More informationREUSABLE ALUMINUM SWIVEL FITTINGS REUSABLE ALUMINUM LIGHTWEIGHT CRIMP SWIVEL FITTINGS OTHER REUSABLE ALUMINUM FITTINGS SOCKETLESS HOSE
283 STAINLESS STEEL BRAIDED RACING HOSE Aeroquip Racing Hose is compatible with petroleum and synthetic lubricants and may be used in fuel, lube, coolant and air applications. Lightweight and flexible,
More informationT&B Fittings. Industrial Fittings. Liquidtight Flexible Nonmetallic Conduit Fittings. Specifications Type A Conduit Fittings
T& Fittings Liquidtight Flexible Nonmetallic onduit Fittings Specifications Type onduit Fittings Series 6302 Liquidtight Flexible Nonmetallic onduit Fittings pplication To provide a liquidtight, dustight
More informationGrounding Clamp. Pins and Ball-Socket Clamps for Temporary Grounding
Grounding Clamp Pins and Ball-Socket Clamps for Temporary Grounding Pins and Ball-Socket Clamps have been designed to solve several temporary grounding situations, where the physical space or the contact
More informationPARTS LIST COLT COLT HEPA
PARTS LIST COLT 800-1250 - 1450 COLT HEPA - 1250-1450 MOTOR / LID ITEM PART NO. PART DESCRIPTION QTY. 101 0891201 TOP COVER 1 102 0294341 TOP MOTOR SEAL 1 103 0299861 STRAIN RELIEF CORD CLAMP 1 104 0891131
More informationIntegrated Process Solutions
Integrated Process Solutions w w w. m k s i n s t. c o m Series 31 ISO-KF fittings Sizes to 0 ( to 4'') Series 31 is a line of ISO-KF standard vacuum components. The ISO-KF system refers to the family
More informationTerminals & Connectors
Your Connection Since 1970 Terminals & Connectors 2 TABLE OF CONTENTS Adapters........................... 13 Brazed Barrel Lugs................... 16-17 Bullet Connectors....................9-10 Butt Connectors.......................3
More informationSection 11 Workstation Components
1 Section Quick and easy access to parts is made possible by the wide variety of trays, bins, and framing components available from Bosch. Individual workstation grab trays, containers, and ledges place
More informationSKU Product Name Price American Underslung
Classic & Exotic Service, Inc. 2032 Heide, Troy MI 48084 USA Phone: 1.248.269.9414 E-mail: Parts@classicandexotic.com WWW: http://www.classicandexotic.com SKU Product Name Price American Underslung MISC-0359
More informationParts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns:
7-1 Section 7 Using the Illustrated List The parts lists provided in this section are organized into the following columns: Item Identifies illustrated parts that are available from Nordson Corporation.
More informationstyle vision & quarter turns quarter turns section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
quarter turns vision & style quarter turns INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 3 quarter turns No. 626-PK Patent Pending
More informationget connected with Bradford fittings & valves Bradford Company, Inc
get connected with Bradford fittings & valves Bradford Company, Inc. 800.789.1718 www.bradfordfittings.com Bradford your top quality, sanitary stainless steel fittings & valves manufacturer serving you
More informationQuickTreX LAN-PRO Terminator Plus II
QuickTreX LAN-PRO Terminator Plus II Part # LANPRO-TERM-PL-V2 The kit contains the following: 16 Pocket Standard Tool Tote Bag PRO-Basic LAN Cable Tester QuickTreX Professional "Wire Surgeon " Impact Termination
More informationCABLE GRIPS CABLE GRIPS
STRAIN RELIEF Deluxe cord grips are woven of stainless steel mesh with an anodized aluminum body for corrosion resistance. They are offered in single/double weave construction to help absorb direct pull,
More informationDEFENSE LOGISTICS AGENCY LAND AND MARITIME P.O. BOX 3990 COLUMBUS, OHIO
DEFENSE LOGISTICS AGENCY LAND AND MARITIME P.O. BOX 3990 COLUMBUS, OHIO 43218-3990 February 5, 2019 MEMORANDUM FOR MILITARY/INDUSTRY DISTRIBUTION SUBJECT: Initial Drafts of: MIL-DTL-13444, MS52103, and
More informationGround Clamps Cable Tray
COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS AND SOLDERLESS CONNECTORS Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both
More informationCONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9
CONTENTS PAGE NUMBER Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5 Hoist Rings Center Pull 6 Side Pull 7 Socket Head Stripper Bolts Inch 8 Metric 9 Punch Holder Shanks 10 Roller Stock Guides 11
More informationMolded High-Voltage Bushing Wells
66-10 Molded High-voltage Bushing Wells Howard Industries Components Division Molded High-Voltage Bushing Wells Catalog Section 66-10 INTRODUCTION Howard Industries molded high-voltage bushing wells are
More informationParts Catalog. S-Series Slicer Manual S13. Model:
, 08 99506 ECN 035 Parts Catalog S-Series Slicer Manual Model: S3 S3 /3/08 Rev. M IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE FOOD
More informationParts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns:
7-1 Section 7 Using the Illustrated List The parts lists provided in this section are organized into the following columns: Item Identifies illustrated parts that are available from Nordson Corporation.
More informationHardware Solutions Contents
Hardware Solutions Contents Front Retainers MS14108 Type Ruggedized Self-locking Front Retainers 21716 Ruggedized Self-locking Front Retainer 21953 Ruggedized Self-locking Front Retainer SLR1 Self-locking
More informationRTA flexible conduits
[ PROTETION OF LES ] Products and systems RT flexible conduits For each application and environmental stress there is a corresponding polyamide, PV or metal-plastic flexible conduit solution, ideal for
More informationData Sheet for Precision Potentiometer
AL(R)17/19 soldering lugs The AL(R)17/19 potentiometers in 22 mm housing are suitable for applications where a precise and economical multiturn potentiometer is important. Economical and precise multiturn
More informationInsulated Tools. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P Insulated Tools r o f e s s i o Klein insulated tools maintain the highest level of quality Klein is known for, and they offer added protection against shock from energized sources with voltage
More informationSeven-eighths-spacing Rackmount Kit/Chassis Rackmount Kit. Techmar enclosure designs include interchangeable modular components,
SRK/CRK SERIES Seven-eighths-spacing Rackmount Kit/Chassis Rackmount Kit Techmar enclosure designs include interchangeable modular components, punched hole patterns and captive hardware, resulting in a
More informationPARTS LIST CHARGER 2022 ABLT
PARTS LIST CHARGER 2022 ABLT HEAD ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 5990731 SPRING CLIP PAD HOLDER SET INCLUDES: 1 101A 9120205 #8 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW PACK OF 3 3 102 9121490
More informationDesign Standards. Utility Manhole Covers
Design Standards Utility Manhole Covers Texas A&M University in College Station has standardized utility manhole covers to be used for all underground utility access on campus. All new utility manhole
More informationThe unique fitting design provides a swivel at both ends of the hose assembly.
The Tramec Sloan Live Swivel system of heavy duty air brake hose assemblies meet and exceed all requirements of FMVSS 106 and SAE J1402. Each end fitting is labeled with certification to the federal standards.
More informationFarm Hardware. Farm Hardware. To order call: Fax:
1 Weather aps lear zinc plated steel. Single bolt installation, silencer block, heat resistant rivets and bushings. Weather aps Muffler lamps Stroke ontrol FITS PIPE DIMETER 11200 1-1/2 1-11/16 11201 1-3/4
More informationCABLE CUTTING, STRIPPING AND CRIMPING TOOLS
Cutting 38-39 Stripping 39 0 - CBE CUTTING, STRIPPING ND CRIMPING TOOS Ergonomic handles Surface protection High precision Flexibility With ergonomic handles and a specially The pliers are made of excellent
More informationPRODOTTI STANDARD PRODOTTI STANDARD
PRODOTTI STANDARD PRODOTTI STANDARD. Nuovi Prodotti... Pagg. 2-6 2. Cuscinetti antifrizione... Pagg. 7-0 3. Gabbie per cuscinetti a sfera... Pagg. - 3 4. Clips per aste filettate... Pag. 4 5. Accessori
More informationDesign Standard. Utility Manhole Covers
Design Standard Texas A&M University in College Station has standardized utility manhole covers to be used for all underground utility access on campus. Until further notice, manhole covers manufactured
More informationThe Contractor s Choice / America s Choice Corporate: (800) Fax: (201)
The Contractor s Choice / America s Choice Corporate: (800) 503-9805 Fax: (201) 964-9030 www.elgenmfg.com MISSION STATEMENT Striving to become the #1 single source solutions provider, serving sheet metal
More informationDEUTSCH H91 Series Filter Connectors MIL-DTL SERIES I
MIL-DTL-38999 Series I connectors are subminiature, environmental-class connectors with high and mediumdensity insert arrangements. They are used where a quickdisconnect coupling system is required for
More informationJERGENS SPECIALTY FASTENERS KWIK LOK RELEASE PINS & ACCESSORIES SPECIALTY PINS & FASTENERS
JEGE ECILY FEE KWIK LOK ECILY & FEE ELEE & CCEOIE WOKHOLDIG OLIO ECILY FEE LIFIG OLIO 2015 jergens, inc. IG1115 15700. Waterloo oad. Cleveland, OH 44110-3898 866.594.5565 jergensinc.com/ecilyfee ECILYFEE@jergensinc.com
More information3/8 BORE MOUNTING BRACKETS
3/8 BORE MOUNTING BRACKETS 11767 Ceramic Insulator Use with cylinder having #8-32 threaded shaft to insulate cylinder from heat or electricity #8-32 thd. - thru dia. Male Clevis 11996 Mounts in rear of
More informationData Sheet for Precision Potentiometer
The ALI(R)17/19 potentiometers in mm housing are suitable for applications where a precise multiturn potentiometer increased radial shaft loads is important. ALI(R)17/19 reinforced bearing ALI(R)17/19
More informationTITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V
TITAN pt. no.: 02 0000 0128 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationSection B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1
Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe
More informationParts List & Exploded View SETTE MAIN ASSEMBLY. Sette 30/270/270W Main Exploded View SA6 SA3 SA1 SA2 SA7 32 SA4 SA SA5 20 REV
Sette 30/270/270W Main Exploded View SA6 Parts List & Exploded View SETTE MAIN ASSEMBLY 8 24 SA3 5 6 7 43 8 25 23 SA 22 64 93 8 5 27 SA2 28 29 9 30 3 5 SA7 32 26 SA4 9 0 SA7 2 7 SA5 2 4 8 20 REV 0348 Page
More informationREAD ME FIRST! IMPORTANT WARNING! ENG. Roof top tent
Roof top tent ENG TENT031 220 min READ ME FIRST! Thank you for purchasing a Front Runner Roof Top Tent. Before you start, take a moment to familiarize yourself with these Fitting Instructions and the components
More informationPARTS LIST MODEL M-1 - PIG
PARTS LIST MODEL M-1 - PIG FAN HOUSING ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 1090601 LABEL KIT - M-1 PIG 1 102 2590019 SWIVEL COUPLING ASSEMBLY - INCLUDES: 1 102A 2590111 HOSE COUPLING GASKET 1 103
More informationApplication A liquidtight fitting to secure flexible cord or power cable to a box or enclosure and provide strain relief. Standard Material/Finish
T& onduit Fittings Flexible ord and able Fittings The Ranger Series Liquidtight Strain Relief Fittings The only fitting to take a.250 inch cable range. New materials and computer aided designs helped T&
More informationSPECIAL-TWEEZERS FOR THE SMD-TECHNIQUE
SPECIAL-TWEEZERS FOR THE SMD-TECHNIQUE high precision tweezers from special steel stainless matt finish anti magnetic acid resisting - alternative with ESD coating (-13) - Finish Weight 5-049 110 4 3 /8''
More informationMACHETES & MACHETE SHEATHS HUDSON BAY AXE SINGLE EDGE AXE GUARD DOUBLE EDGE AXE GUARD LADDER PLATFORM. Machete CAT. NO.
Phone: 800-227-4255 www.hallssafety.com Fax: 724-458-0592 MACHETES & MACHETE SHEATHS Machete 2PMA18-18 Blade 2PMA22-22 Blade High quality machete. High carbon tempered steel blade. Black poly handle with
More informationInstruction Manual Remote Swabbing and Microbiological Sampling and Teflon template tools Version , Rev.0
ASSEMBLY AND OPERATIONAL INSTRUCTIONS The remote swabbing and microbiological sampling tool and the Teflon template tool are shipped partially assembled. Complete assembly instructions are provided below:
More informationSupertrack 2. A versatile 3-circuit lighting track system, with a full range of power feeds, connectors, couplers and suspensions.
Supertrack 2 A versatile 3-circuit lighting track system, with a full range of power s, s, couplers and suspensions 16A track units in high quality extruded aluminium with three separately switchable circuits.
More informationWRANGLER 1710AB, 2010AB
WRANGLER 1710AB, 2010AB WIRING DIAGRAM ITEM PART NO. DESCRIPTION QTY 1 1393251 WIRE ASSEMBLY - CIRCUIT BREAKER TO BRUSH SWITCH 1 2 1393261 WIRE ASSEMBLY - CIRCUIT BREAKER TO VACUUM SWITCH 1 3 1393271 WIRE
More informationAerospace. Light Weight and Flexible Qualified to Industry Standards. Fluid Conveyance
Aerospace Fluid Conveyance Aeroquip Brand Rubber Hose, & Assemblies for Aerospace Applications Light and Flexible Qualified to Industry Standards 303, 302A Medium Pressure Hose,, and Assemblies Construction:
More informationContinental Industries CON-STAB ID SEAL FITTINGS or FAX Visit
Continental Industries CON-STAB ID SEAL FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958
More informationVanagon Ladder Kit Assembly & Installation Instructions
Rocky Mountain Westy Vanagon Ladder Kit Assembly & Installation Instructions Introduction Thank you for purchasing the Rocky Mountain Westy Vanagon Ladder Kit. We pride ourselves in the products we develop
More informationParts Catalog. Slicing Machine G10. Model:
, 07 995079 ECN 96 Parts Catalog Slicing Machine G0 Model: G0 /8/7N Rev. E, Serial Number 4048 and Up IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER
More informationANACONDA SEALTITE CONDUIT TYPE NMFG BLUE
ANACONDA SEALTITE CONDUIT TYPE NMFG BLUE All-plastic, medium mechanical strength, food grade conduit.. NMFG is a conduit specially made for the food industry. The smooth jacket of FDA approved compound
More informationEXTERNAL DIMENSIONS. L Length Kg W Width Kg D Depth. W Width. D Depth. 0 Kg Lid lt Base EXTERNAL DIMENSIONS.
Mod. 4412 B COPOLYMER POLYPROPYLENE WATERPROOF CASE Metric mm-kg-c INTERNAL DIMENSIONS EXTERNAL DIMENSIONS OTHER DATA L Length 445 mm L Length 474 mm Weight empty 3.40 Kg W Width 345 mm W Width 415 mm
More informationComponents. Ralphs-Pugh Roller Component Parts. Bushings. Endplugs. Plastic Tubing. Hardware
Ralphs-Pugh Roller Component Parts Ralphs-Pugh roller components are custom molded or fabricated at our facility insuring the highest quality possible. With complete control of design and a long-term commitment
More informationIcelock Ratchet 621 Icelock Lanyard 631 Icelock Valve 641 Icelock Smooth 651
Extremely light-weight and low build height. Fabrication Tools make the weight fabrication process very effective Very strong and durable Socket Adapters rated up to 100kg (220lbs) and 166kg (365lbs) Easily
More informationSERVICE SHEET 34" WALK-BEHIND POWER TROWEL MODEL FT34 (THIS SERVICE SHEET APPLIES TO THE TROWELS WITH SERIAL NUMBER AND AFTER) WARNING
34" WALK-BEHIND POWER TROWEL (THIS APPLIES TO THE TROWELS WITH SERIAL NUMBER 0837 AND AFTER) WARNING To reduce the risk of injury, all operators and maintenance personnel must read and understand these
More informationCounter Display Items
1/4" Dr. x 3/8" Dr. Dual Drive Stubby Ratchet Part No. 640923 Dual drive 2 in 1 design Compact size is great for fasteners in tight areas Black composite coating with TPR injection handle for comfort 272504
More informationBR-2250/BR Burnisher. Operator and Parts Manual. Model No.: BR BR-2250 Can. Pac BR BR-2500 Can.
BR-220/BR-200 Burnisher Model No.: 608342 BR-220 609248 BR-220 Can. Pac 608340 BR-200 609247 BR-200 Can. Pac Operator and Parts Manual NOBLES 1287 RANSOM STREET HOLLAND MI 49424 U.S.A. CUSTOMER SERVICE:
More informationWire and Cable Holders
WIRE MANAGEMENT Wire and able Holders For low cost wire management. The push-mount style comes in vertical orientation for top entry and narrow width, and horizontal orientation for side entry and low
More informationUNIVERSAL PARTS GLOBAL
STAINLESS HOSE CLAMPS WIDE Stainless Band (9/16 ) No spot welds Extra long take up Smooth edges Interlock construction which strengthens under tension to ensure maximum torque application Worm gear clamps
More informationinside diameter wire part no. color length I.D. after recovery gauge red Single Wall Polyolefin 2:1 Shrink Tube - Flexible
PVC 2:1 Shrink Tube Use to insulate terminals after the terminal has been crimped to the wire. Tubing remains flexible and will shrink to approximately 50% of its original size when 160 C (320 F) heat
More informationEJ Beverage. An Eldon James Company. Quality Tubing and Connectors
EJ Beverage An Eldon James Company Quality Tubing and Connectors 3 Food and Beverage Applications EJ Beverage offers a full line of tubing and connectors for a wide variety of food and beverage applications.
More informationSIN GLE BOND HOSE CLAMPS
Sec. 24 YOKE ENDS & HOSE CLAMPS Zinc Fin ished Drop Forged Yoke Ends Ad just able Auveco T Dimensions In Inches Unit Part No. Tap Size A B C D E F G H K Pkg. 10737 1/4-28 2 7/16 7/16 1-1/4 9/32 5/8 1/4
More informationCouplings for Gates Hoses 7 Combination Nipple
Supersedes 1 Long Shank Couplings for Gates Hoses 7 Combination Nipple Description: Cast brass, serrated shank, set has hex male and hex swivel female couplings, with a washer seal. Threads are GHT or
More informationFILTERED FAN PACKAGES
FILTERED FAN PACKAGES PLASTIC & METAL FILTERED FANS EFFICIENT, QUITE BALL BEARING MOTORS NEMA TYPE 1 AND 3R ALL KITS INCLUDE GASKETS, HARDWARE, AND TEMPLATE UL LISTED Plastic FILTER FAN PACKAGES Injection
More informationIndustrial Specification Grade Straight Blade Receptacles. Duplex and Single Receptacles
Industrial Specification rade 2 Pole, 3 ire rounding Duplex and Single A-5 STRAIHT BLADE TESTIN & CODE Spec. C-596 (file no. 15058). C22.2 no. 42, CSA (file no. 6233-01). 2.37" (60.2mm) 1.31" (33.3mm)
More informationPOP-UP OPTION USER HARDWARE MANUAL. EdgeTech 4 Little Brook Road West Wareham, MA _REV_B 8/29/2018
POP-UP OPTION USER HARDWARE MANUAL 0019850_REV_B 8/29/2018 EdgeTech 4 Little Brook Road West Wareham, MA 02576 Tel: (508) 291-0057 Fax: (508) 291-2491 www.edgetech.com ii The information, figures, and
More informationGlass Door Fittings Glass Door Accessories
Angled striking plate Aluminium stainless steel coloured 981.27.983 Recess striking plate DIN left DIN right Steel nickel plated matt 911.39.285 911.39.28 WC thumbturn cylinder Area of application: For
More informationKnives, Cutters & Scrapers
Knives, Cutters & Scrapers - 261 - Utility Knives T23216 T232 T23218 Snap-Off Knives SK4 Steel blades Stores up to 3 replacement blades Blade sections snap off providing sharp cutting point Stainless steel
More informationSTRAIGHT BLADE RECEPTACLES
STRAIHT BLADE RECEPTACLES ENERLITES INC. offers a full line of 15 A, 20 A, 30 A and 50 A Receptacles available in Residential rade, Commercial rade, and Industrial rade. ENERLITES Receptacles are precision-manufactured
More informationUpchurch LOW PRESSURE FITTINGS AND CONNECTORS
AND CONNECTORS Flangeless Fittings Upchurch Flangeless Fittings Upchurch Scientific Flangeless Fittings eliminate the need to flange tubing. This removable and reusable system provides several benefits:
More informationASSEMBLY GUIDE. Customer Service: INCH² 2-BURNER & 864 INCH² 2-BURNER
ASSEMBLY GUIDE 688 INCH² 2-BURNER & 864 INCH² 2-BURNER DANGER If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flames. 3. Open lid. 4. If odor continues, keep away from the appliance
More informationElectrician's Insulated Tools
Klein insulated tools combine excellent functionality along with reduction of risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts. ~ Electrician's FORGED
More informationEmergency Stop Devices
New! Selection and Application of.. 278 Emergency Stop Rope Pull Switches........... 279 New! Emergency Stop Push Buttons............... 293 Banner Engineering Corp. Minneapolis, MN U.S.A. bannerengineering.com
More informationER36D Range. IMPORTANT: This model is not approved for field conversions of gas types or altitude settings.
ER6D Range Page Description Page Description Cooktop Assembly Cooktop Parts Burners & Tubes 5 Manifold Assembly 6 Manifold Parts 7 Control Panel Assy 9 Oven Assembly 0 Oven Parts Exterior Components Exterior
More informationSection B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1
Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe
More informationTank. Part B, Section 1. This section covers the following unit configurations. Pump Piston Pump (E or G)
Part B, ection Model Voltage This section covers the following unit configurations. 3400V All Pump Piston Pump (E or G) Manifold Control 4-Port (A) Vista tandard (V) Vista Pattern (PC) Vista Temperature
More informationParts Catalog Issued: Jul 22, ICCI IH820 Series
Parts Catalog Issued: Jul, 04 ICCI IH80 Series Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service parts for. If you
More information