Section B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1

Size: px

Start display at page:

Download "Section B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1"

Drusilla Curtis
6 years ago
Views:

1 Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe and locate parts correctly. Using the Illustrated Parts List Numbers in the Item column correspond to numbers that identify parts in illustrations following each parts list. The code NS (not shown) indicates that a listed part is not illustrated. A dash ( ) is used when the part number applies to all parts in the illustration. The number in the Part column is the Nordson Corporation part number. A series of dashes in this column ( ) means the part cannot be ordered separately. The Description column gives the part name, as well as its dimensions and other characteristics when appropriate. Indentions show the relationships between assemblies, subassemblies, and parts Assembly Subassembly A Part If you order the assembly, items and will be included. If you order item, item will be included. If you order item, you will receive item only. The number in the Quantity column is the quantity required per unit, assembly, or subassembly. The code AR (As Required) is used if the part number is a bulk item ordered in quantities or if the quantity per assembly depends on the product version or model. Letters in the Note column refer to notes at the end of each parts list. Notes contain important information about usage and ordering. Special attention should be given to notes.

2 B - Parts. Tank Assembly Parts List See Figure B -. 6 Screw, pan head, hi-lo, recessed, cut, #6-9 x 0.0 in Washer, flat, E, 0.6 x 0.7 x 0.09 in. 80 Gasket, tank lid Screw, pan head, slotted, M x 0 mm 06 0 Gasket, tank Strainer, tank RTD w/harness A Plate, retainer, RTD Screw, pan head, cross recessed, M x mm Thermostat w/harness A 88 Spacer, manifold, 0.00 ID x 0.6 in. 98 Washer, flat, narrow, M Washer, lock, external, M8 98 Screw, hex head, cap, M8 x 0 mm Screw, hex head, cap, M8 x 70 mm Washer, lock, split, M Spacer, tank, 0.0 ID x.0 in. 8 0 Tank (00 0 VAC and 00 VAC/0 VAC units) 8 Tank (00 VAC and 80 VAC units) Cover, tank (00 0 VAC, 00/0 VAC, and 00 VAC units) 8 86 Cover, tank (80 VAC units) Outer lid, tank (00 0 VAC, 00/0 VAC, and 00 VAC units) B Outer lid, tank (80 VAC units) C 0 69 Pan, pump Screw, hex head, cap, M8 x mm Assembly, pump D NOTE A: Apply thermal joint compound, part B: For a complete lid assembly, order part 906. C: For a complete lid assembly, order part D: Refer to Piston Pump Parts List.

3 Parts B , 8, A Fig. B - Tank Assembly Parts

4 B - Parts Frame Assembly Parts List See Figure B Cover, pump Insulation, tank (00 0 VAC and 00/0 VAC units) Insulation, tank (00 VAC units and 80 VAC units) 7 7 Panel, hose end, -hose harness (00 0 VAC, 00/0 VAC, and 00 VAC units) 7 Panel, hose end, -hose harness (80 VAC units) 7 Panel, hose end, -hose harness (00 0 VAC, 00/0 VAC, and 00 VAC units) Panel, hose end, -hose harness (80 VAC units) 98 Screw, pan head, recessed, M6 x 0 mm Panel, front (00 0 VAC and 00/0 VAC units) 9 78 Panel, front (00 VAC units) 60 Panel, front (80 VAC units) 6 6 Screw, hex head, hi-lo, wash, cut, / Pin, hinge 8 Nut, push Control assembly A Ground stud assembly B NOTE A: Refer to Control Assembly Parts List. B: Refer to Ground Stud Assembly Parts List. Continued on next page

5 Parts B Frame, center (00 0 VAC, 00/0 VAC, and 00 VAC units) 60 Frame, center, w/insulation (80 VAC units) Strap, front panel (00 0 VAC and 00/0 VAC units) 9 7 Strap, front panel (00 VAC units) 9 7 Strap, front panel (80 VAC units) Screw, pan head, recessed, M x 8 mm Screw, pan head, hi-lo, recessed, 6-9 Panel, rear (00 0 VAC and 00/0 VAC units) 0 6 Panel, rear (00 VAC units) 0 8 Panel, rear (80 VAC units) 6 88 Insulation, center frame (00 0 VAC, 00/0 VAC, and 00 VAC units) Lid, electrical enclosure (00 0 VAC and 00/0 VAC units) 8 Lid, electrical enclosure (00 VAC units and 80 VAC units) A Base Gasket, D-shaped, center Gasket, D-shaped, end Washer, flat, regular, M Washer, flat, 0.6 x 0.6 x 0.00 in. 8 9 Guard, filter/drain valve NOTE A: The center frame insulation for 80 VAC units is included in the center frame service kit, part 60.

6 B -6 Parts Frame Assembly Parts List (contd) ÏÏ ÏÏÏ ÎÎÎÎ ÏÏ ÏÏÏ ÎÎÎÎÎÎÎÎÏÏ ÏÏÎÎÎÎÎÎÎÎ Ï ÎÎÎÎÎÎÎ ÌÌ Ï ÏÏÏÎÎÎ ÌÌ ÎÎ 7 ÎÎ ÎÎÎ 6 Î Î ÎÎ ÎÎ ÎÎ ÎÎ 0 Î Î ÎÎ Î A Fig. B - Frame Assembly Parts

7 Parts B -7 Ground Stud Assembly Parts List See Figure B Nut, hex head, machine, #0-7 Lug,, double, 0.0 in., 0.8 in Washer, lock, split, # Tag, ground Washer, lock, external, # Screw, round head, #0- x.00 in Base A NOTE A: Base shown for reference purposes only A Fig. B - Ground Stud Assembly Parts

8 B -8 Parts. Manifold A Assembly Parts List The manifold assembly includes the manifold block, manifold filter, pressure relief valve, and drain valve. See Figure B -. 0 Manifold A, -port, noncirculating, standard filter A 0 Valve, pressure relief, 600 psi,. in. 98 Washer, flat, narrow, M Screw, hex-head, special, M8-. B 97 7 Plug, O-ring, straight thread, 9 / B 90 0 O-ring, Viton, 0.9 ID x in Backup ring, single, / x / 8 in Drain valve assembly B Screw, pan-head, slotted, M x 8 mm B Washer, lock, split, M Manifold filter assembly B, C 7 69 Adapter, filter bung B, D 9 0 O-ring, Viton,. x. x 0.09 in. E 90 8 O-ring, Viton,.7 x.00 x 0.06 in. E NOTE A: This part is a complete manifold assembly and includes items,,, and. B: Apply anti-seize lubricant, part 900. C: Refer to Manifold Filter Parts List. D: Apply retaining cylindrical adhesive, part E: Apply O-ring lubricant, part A Fig. B - Manifold Assembly Parts

9 Parts B -9 Manifold Filter Parts List See Figure B -. 0 Manifold filter assembly 7 78 Screen, mesh,.8 in. long Screw, round-head, 0- x 6.0 in. A 7 Bung 9 7 O-ring, Viton, 0.8 x.000 x 0.09 in Core,.78 in. long NOTE A: Apply anti-seize lubricant, part 900. Ì ÌÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ 00A Fig. B - Manifold Filter Parts

10 B -0 Parts. Control Assembly Parts List See Figure B -6. NOTE 8 9 Repair kit, control assembly, 80 VAC A Service kit, control-end frame Nut, spring, U type 7 77 Operator panel, pattern control, Vista Power switch, 0 VAC, 6 A, panel mounted 0 Power switch boot 6 8 Harness, power switch Repair kit, display board, pattern control Screw, hex head, slotted, M x 8 mm, w/nylon patch Connector, 0 position (display board to control board) Repair kit, control board, 80 VAC Screw, hex head, slotted, M x mm, w/nylon patch Service kit, software chip, Vista, 80 VAC 0 Connector, 6 position (control board to power board) 7 Repair kit, power board, Vista Screw, hex head, slotted, M x mm, w/lock washer Screw, hex head, slotted, M x 6 mm, w/lock washer Screw, socket head, cap, M x 0 mm, w/nylon patch 8 6 Clamp, triac, power board Voltage plug, power board B Connector, plug, power board, 6 position, mm 99 9 Fuse, power board, 0.0 A, fast acting, 600 VAC C Fuse, power board, 6. A, fast acting, 0 VAC 8 D 68 Bracket, ground wire 9 Mount, cable strap (located on item ) 0 6 Terminal, ground wire, 6 AWG A: Order this part for a complete control assembly. B: This voltage plug is the same as the voltage plug used on 0 VAC (with neutral) units. C: Fuses for control power supply (F9 and F0 on the power board). The fuses for control power are on the 80 VAC distribution board. Refer to Unit-Specific Parts List. D: Fuses for hoses and guns (F through F8 on the power board).

11 Parts B A Fig. B -6 Control Assembly Parts

12 B - Parts Unit-Specific Parts List See Figure B Repair kit, pattern control driver board Fuse, pattern control driver board, AG, A, 0 VAC A Screw, pan head, recessed, M x 0 mm 98 Washer, lock, M, external, M B Harness, pattern control driver board to power board Harness, 8 pin, pattern control driver board to pattern control engine board Harness, pin, pattern control driver board to display board Suppressor, 7 mm diameter (square ferrite) Inductor, bead,. in. diameter (round ferrite) Suppressor, ferrite,. mm diameter 7 6 Repair kit, pattern control engine board NS 0 90 Service kit, software chip, Vista PC 0 0 Bracket, expansion, pattern control engine board 98 Screw, pan head, recessed, M x 0 mm Repair kit, 80 VAC distribution board 99 0 Fuse, 80 VAC distribution board, 0 A, fast acting, 600 C VAC Fuse, 80 VAC distribution board, 6 A, fast acting, 0 D VAC 7 8 Harness, 80 VAC distribution board, transformer Harness, 80 VAC distribution board, power input Harness, 80 VAC distribution board, tank heater 0 8 Harness, 80 VAC distribution board, relay Service kit, relay Service kit, transformer, 80 VAC, kva, 60 Hz 7 60 Repair kit, /6 hose/gun board Fuse, /6 hose/gun board, 6. A, fast acting, 0 VAC 666 Harness, /6 hose/gun board, power input 6 6 Clamp, triac, /6 hose/gun board Repair kit, I/O board, standard E 9 9 Repair kit, I/O board, enhanced E NOTE A: Fuse for + VDC output (F on the pattern control driver board). B: This washer is used only once, with item. C: Fuses for control power and tank heater power (F through F on the 80 VAC distribution board). D: Fuse for transformer (F on the 80 VAC distribution board). E: Present only on units with an I/O board. Refer to Series 000V Input/Output Board in the Options section.

13 Parts B A Fig. B -7 Unit-Specific Parts

14 B - Parts. Pump Assembly Parts List The pump assembly includes the piston pump and the actuator. This section also includes a parts list for the air pressure regulator.see Figure B Pump, piston, :, SP Bracket, cover, pump, SP, :, 6: Screw, socket-head, M x Washer, flat, narrow, M 98 0 Washer, lock, split, M Valve assembly, SP Lubricant, Parker, hi-temp AR 7 60 Spring, wave, SP pump 8 07 Detent, upper, SP Fork, magnetic, assembly Actuator, magnetic, assembly, SP 068 Can, SP 067 Detent, lower, SP Retaining ring, internal, 6, bowed 09 Piston pump, :, SP 98 0 Pin, roll, 0. x 0.00 in Ball, 0 stainless, 0.7 in., Seat, ball, pressure Adhesive, threadlocking, Loctite 7 AR Cage, ball, siphon Tube, crossover, pump 900 Lubricant, Never Seez, 8 oz can AR 9 0 Backup ring, single, 7 / 6 x 9 / 6 in. 90 O-ring, Viton, 0.6 ID x in. wide 0 69 Seat, ball, siphon Ball, 0 stainless, 0.00 in., Body, pump, hydraulic Plug, pipe, socket, flush, / 8 in Mount, pump, machined, 6: and : Washer, lock, bearing, W-08, 0 98 Nut, lock, bearing, PN Screw, hex-head, cap, M6 x Washer, flat, narrow, M6 90 O-ring, Viton,.000 x. x 0.06 in U-cup, Viton 986 Retaining ring, internal, 00, push-on Manifold, air, SP Nut, hex, lock, torque, M6, class Head, cylinder, SP, machined 9 98 Washer, piston seal, SP Continued on next page

15 Parts B - Item Part Description Quantity Washer, piston cup, SP 6 09 Cup, piston, SP Retaining ring, internal, inverted 7 8 Washer, OD x 0. ID x 0.0 in. thick 7 9 Seal, pump 98 7 Screw, hex-head, cap, M6 x Washer, lock, split, M Screw, socket-head, M x SP lubricating oil AR Screw, pan-head, M x 0 AR: As Required Note A Fig. B -8 Pump E Parts

16 B -6 Parts UpTime Pack See Figure B -9. The UpTime pack for pump E provides the parts that should be replaced as part of routine maintenance UpTime pack, pump E, SP 0, : NS 90 O-ring, Viton, 0.0 x 0.70 in. A 90 O-ring, Viton,.00 x. x 0.06 in Nut, hex, lock, torque, M6, class Cup, piston 986 Retaining ring, internal, 00, push-on Cup, U, Viton Retaining ring, internal, 8, inverted Washer, OD x 0. ID x 0.0 in Seal, pump 0 90 O-ring, Viton, 0.6 ID x 0.70 in O-ring, Viton, ID x 0.70 in. wide NS 8 SP lubricating oil NOTE A: Not used with this pump. NS: Not Shown A Fig. B -9 Pump E UpTime Pack Parts

17 Parts B -7 Air Pressure Regulator Parts List 6 87 Regulator/filter assembly, 90 psi ( hose applicators) 6 87 Regulator/filter assembly, 90 psi (6 hose applicators) 6 7 Regulator, filter, air, / NPT Nipple, brass, 0, / in.,.0 in. ( hose applicators) 97 9 Nipple, brass, 0, / in.,.00 in. (6 hose applicators) 90 8 Gauge, air, / 8 NPT, 90 psi Service kit, filter element Service kit, filter bowl 09A

18 B -8 Parts 6: Piston Pump Uptime Pack The Uptime pack for SP pump provides the parts that should be replaced as part of routine maintenance Service kit, SP Pump E, Uptime Pack 90 O-ring, 0. x 0.8 x O-ring, Viton,. x.00 x.06 A Nut, lock, hex, M Lock washer, split, M Piston cup Push-on retaining ring U-cup A Internal retaining ring,.0 inch 9 88 Washer,.0 x Pump seal A 90 O-ring, Viton, 0. x 0.6 x 0.06 A 9 0 Ring, back-up 7 / 6 x 9 / O-ring, Viton,.8 x.6 x.09 A NOTE A: Apply lubricant P/N 900 9

19 Parts B Pack P/N

20 B -0 Parts 6: Piston Pump Parts List Use the following parts list to order parts for the 6: SP pump Pump, piston, 6: SP-0, G 9 6 O-ring, Viton,.7 X.6 X Internal retaining ring, 06, spiral 88 Washer,.0 X Pump seal, high volume, MPL 97 0 Pipe plug, socket, flush / 8 inch 6 67 Piston pump body, :, grid Crossover tube, MPL, pump Single back-up ring, 7 / 6 X 9 / O-ring, Viton, 0.6D X wide Hydraulic piston pump, 6: SP Piston, HMVII 98 0 Step washer,.00 diameter, SS Screw socket, low, M8 X 6 0 Cage, ball, siphon Stainless ball, 0, 0.70, Seat, siphon ball Pump mount, machined, 6: and : 8 98 Hex screw cap, M6 X Washer, flat, M, narrow, M Washer lock, E, BRG, W Lock nut, BRG, PN Magnetic fork assembly Internal retaining ring, 6, bowed 067 Detent, lower SP Continued on next page

21 Parts B A

22 B - Parts 6: Piston Pump Parts List (contd) 068 Can, SP Screw, socket, M X Magnetic actuator assembly 8 07 Detent, upper SP 9 60 Spring wave, inconel, SP pump Lubricant, Never Seez, 8 oz. can Valve assembly SP Lubricant, Parker high temperature Bracket, cover, pump, SP, : and 6: Screw socket, M X 8, BL 98 0 Washer, lock, split, M Washer, flat, narrow, M 7 7 Cylinder head, machined, SP U-cup, Viton Internal retaining ring, 00, push-on 0 90 O-ring, Viton,.000 X. X Piston cup washer, SP 6 09 Piston cup, SP 98 Piston washer seal, SP Nut, hex, lock, torque, M6, class Air manifold, SP Washer, lock, split, M Hex screw cap, M6 X 0 NS Adhesive, threadlocking 0 NS: Not Shown

23 Parts B - : Piston Pump Uptime Pack The Uptime pack for SP pump provides the parts that should be replaced as part of routine maintenance Service kit, SP Pump F, Uptime Pack 90 O-ring, 0. x 0.8 x Viton O-ring,.7 x.88 x 0.06 in. A Nut, Hex, M Split lock washer 88 6 Piston cup Push-on retaining ring A U-cup Internal retaining ring,.0 in Washer,.0 x 0.8 in Pump seal A 90 Viton O-ring, 0. x 0.6 c 0.06 A NOTE A: Apply lubricant P/N Pack P/N

24 B - Parts : Piston Pump Parts List Use the following parts list to order parts for the : SP pump. 09 Pump, piston, : SP 6 60 Actuator assembly 90 O-ring, 0. x 0.8 x Air cylinder cap 98 7 Screw, Hex Hd, Cap, M6 x 0 mm D Lock washer, Split, M6 D O-ring, Viton,.7 x.88 x 0.06 (pkg of ) Air cylinder Nut, Hex, M Washer cup piston Piston cup 88 7 Piston seal washer 986 Internal retaining ring, Push-on 9 00 Viton U-cup A 6 0 Pump mount 98 0 Screw, Hex Hd, Cap, M8 x 6 mm D Washer, flat, Regular, M Lock washer, Ext. M Screw, Hex Hd, Cap, M6- x 0 mm Shifter fork assembly 0 98 Locknut, PN Lock washer, WH Internal retaining ring, Washer,.0 x Pump seal A 67 Hydraulic pump body Pipe plug, /8 inch C Crossover tube C Single backup ring, 7/6 x 9/ O-ring, Viton, 0. x 0.6 x 0.06 A Hydraulic pump piston Piston 98 0 Step washer,.00 Dia. SS Continued on next page

25 Parts B Screw, Soc Hd, Low, M8 x 6 mm 0 Siphon ball cage Ball 6 0 Siphon ball seat B NOTE A: Apply lubricant P/N B: Apply Loctite P/N C: Apply PTFE paste P/N D: Apply Never Seez Lubricant P/N

26 B -6 Parts Actuator Assembly Parts List 6 60 Actuator assembly Screw, socket, M X 0 0 Valve cap 0 60 Bumper assembly 90 8 O-ring, Viton Parker, hi-temp lubricant Air valve assembly 7 0 Valve body Hex nut, lock, M Spring 0 07 Upper detent Screw, socket, M X Magnetic actuator assembly 068 Can, SP 067 Lower, detent Internal retaining ring NOTE A: Apply lubricant P/N 900 9

27 Parts B A

28 B -8 Parts

Section B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1

Section B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1 Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe