Steel Flareless Ermeto Connectors

Size: px
Start display at page:

Download "Steel Flareless Ermeto Connectors"

Transcription

1 Ermeto onnectors PPITIO T Typical pplication: Hydraulic, instrumentation and chemical processing. Highly recommended for high pressure and high vibration applications. Tube O.. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/ /4 1-1/2 2 Thread 5/ /8-24 7/ /2-20 9/ /4-16 7/ / / / / / /2-12 Ermeto onnectors 7000 Series Pressure Rating hart connection type End Hose Pressure: See chart below. Sealing ethod: 3-piece bite-type. Vibration Rating: Excellent resistance aterial: arbon steel, Stainless steel odies and nuts type 316, sleeves 17-4PH Used With: luminum, hard or half-hard copper, steel, stainless steel, monel, titanium and heavy wall tubing that cannot be flared. dvantages: o tube flaring. Used with extra heavy wall tubing. road selection of styles and sizes. onformance: eets S, SE, SE, and S specifications and standards. Ordering Information: onnectors are ordered as complete assemblies. To order bodies only (less nut and sleeve), prefix catalog number with the letter. Example: 7205x4. Order nuts and sleeves separately by catalog number. abel Set: FS /8 3/16 1/4 5/16 3/8 1/2 3/4 5/8 7/ /4 1-1/2 2 Ermeto onnectors W/djustable Straight Thread O-Ring With ale Pipe With Female Pipe Preset with Preset Tool: (Preset Tools are listed on page 389.) 1. Slide nut and then sleeve on tube. Shoulder of sleeve must be toward nut. 2. Insert tube into presetting tool. e sure that tube is bottomed on fitting tube stop at point. ubricate threads, seat of fitting and shoulder of sleeve with good grade of lubricant. 3. Turn nut slowly with wrench while turning tube with other hand. When the sleeve grips the tube, that is, when the tube can no longer be turned by hand STOP and note the position of the wrench. This is the Ring Grip point. Tighten nut an additional number of turns past the ring grip point as shown in Table 1, page 316. UTIO: ll stainless steel sleeves should be preset in tool prior to installation. Preset in Fitting ody 1. Follow same procedure as when presetting with preset tool. Once the fitting nut has been turned the proper number of turns past ring grip, the fitting assembly is complete and ready for use. ote: Only carbon steel sleeves can be preset directly into the fitting body. ue to possible thread galling, the use of presetting tools is required when stainless steel onnectors are to be assembled. WRIG Follow the installation procedures below with care to ensure proper installation of Ermeto onnectors. Installation: 1. fter sleeve and nut have been preset on the tubing and checked as described, the assembly is ready for installation into the Ermeto connector seat. 2. ubricate threads, seat of fitting and shoulder of sleeve with a good grade of lubricant compatible with system fluid. 3. Insert tube assembly into fitting and tighten nut until sharp rise in torque is felt. 4. Starting at the position of sharp torque rise, tighten nut 1/4 turn to complete the assembly. ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September SPEITY HOSE HIGH OW & EIU ESSORRIES & S Y ISTRUTIOS PTERS & TUE HOSE ES TEHI T HOSE SSEY EQUIPET

2 PPITIO T Ermeto onnectors OW & EIU HIGH SPEITY HOSE ESSORRIES & S Y ISTRUTIOS PTERS & HOSE ES HOSE SSEY EQUIPET TE 1 umber of dditional Turns from Ring Grip for Hand Presetting Operation Ermeto Sleeve Tube **Tube Size aterial /6 1-1/6 1-1/6 1-1/6 I T /6 1-1/6 1-1/6 1-1/ /6 1-1/6 1-1/6 1 I T /6 1-1/6 1-1/ /6 1-1/6 1-1/6 1 I T / / /6 1-1/6 1-1/6 1 I T /6 1-1/ /6 1-1/6 1 1 I T /6 1 5/6 5/ /6 1-1/ I T /6 1 5/6 5/6 5/ /6 1 5/6 5/6 5/6 5/6 I T /6 1 5/6 5/ /6 5/6 5/6 5/6 I T /6 1 5/6 5/6 5/6 5/ /6 1-1/6 5/6 5/6 5/6 5/6 I T /6 1-1/6 5/6 5/6 5/6 5/ / /6 5/6 I T /6 5/ I T I T Presetting tools provide a more accurate and positive leakproof method of coupling flareless onnectors. Presetting steel Ermeto sleeves on tubing prior to the fitting assembly will permit the maximum high performance obtainable with flareless onnectors. ue to possible thread galling the use of presetting tools is required when stainless steel onnectors are to be assembled. See page 431 for T hydraulic preset machine. Ermeto Hand-Presetting Tools 7000 Series atalog Seat Tube O.. Thread umber Size (Inches) Size T /8 5/16 24 T /16 3/8 24 T /4 7/16 20 T /16 1/2 20 T /8 9/16 18 T /2 3/4 16 T /8 7/8 14 T /4 1-1/16 12 T /16 12 T /4 1-5/8 12 T /2 1-7/8 12 T /2 12 TEHI T 316 ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September 2006

3 Steel onnectors Ermeto onnectors vailable in Stainless Steel. PPITIO T Sleeve Stainless Steel o. 7176x (Ref. SE o ) Sleeve (For use with diesel nuts only) T T TubE atalog ia. O.. umber T 1/8 7165x / x /4 7165x / x /8 7165x /2 7165x /8 7165x /4 7165x /8 7165x x /4 7165x /2 7165x x TubE atalog ia. O.. umber T 1/4 8165x / x /8 8165x SPEITY HOSE HIGH OW & EIU ut Stainless Steel o. 7117x (Ref. SE o ) TubE atalog Hex O.. umber ia. 1/8 7105x2 3/ / x3 7/ /4 7105x4 9/ / x5 5/ /8 7105x6 11/ /2 7105x8 7/ /8 7105x /4 7105x12 1-1/ /8 7105x14 1-3/ x16 1-1/ /4 7105x /2 7105x24 2-1/ x32 2-7/ ESSORRIES & S Y ISTRUTIOS PTERS & TUE HOSE ES iesel ut Tube Thread atalog Hex O.. Size umber 1/4 9/ x4 3/4.94 5/16 5/ x5 13/ /8 3/ x6 15/ ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September TEHI T HOSE SSEY EQUIPET

4 PPITIO T Steel onnectors Ermeto onnectors vailable in Stainless Steel. OW & EIU HIGH SPEITY HOSE ESSORRIES & S Y ISTRUTIOS PTERS & HOSE ES ulkhead ut Stainless Steel o. 7936x (Ref. SE o ) ap Stainless Steel o. 7141x (Ref. SE o ) Plug Stainless Steel o. 7241x (Ref. SE o ) TubE atalog Hex O.. umber 1/4 7924x4 11/ /8 7924x6 13/ /2 7924x /8 7924x10 1-1/8.36 3/4 7924x12 1-3/8.41 7/8 7924x14 1-1/ x16 1-5/ /4 7924x20 1-7/8.41 TubE atalog Hex O.. umber 1/4 7129x4 9/ /8 7129x6 11/ /2 7129x8 7/8.84 5/8 7129x /4 7129x12 1-1/ x16 1-1/ /4 7129x x2 also available TubE atalog Hex O.. umber 1/8 7229x2 7/ /4 7229x4 1/2.71 5/ x5 9/ /8 7229x6 5/8.75 1/2 7229x8 13/ /8 7229x10 15/ /4 7229x12 1-1/ x16 1-3/ HOSE SSEY EQUIPET TEHI T Reducer Stainless Steel o. 7027x (Ref. SE o ) 318 ody Tube atalog Hex Size Size umber T E 3/8 1/4 7015x6x4 1/ /2 1/4 7015x8x4 9/ /2 3/8 7015x8x6 5/ /8 1/2 7015x10x8 13/ /4 3/8 7015x12x6 13/ /4 1/2 7015x12x8 13/ /4 7015x16x12 1-1/ / x20x16 1-3/ x16x8 also available ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September 2006

5 Steel onnectors Ermeto onnectors vailable in Stainless Steel. PPITIO T Small Hex Union Stainless Steel o. 7317x (Ref. SE o ) arge Hex Union Stainless Steel o. 7318x (Ref. SE o ) 1 1 Tube Tube atalog Hex 1 O.. O.. umber 1/8 1/8 7305x2 7/ /16 3/ x3 7/ /4 1/4 7305x4 1/ /16 5/ x5 9/ /8 1/4 7305x6x4 5/ /8 3/8 7305x6 5/ /2 3/8 7305x8x6 13/ /2 1/2 7305x8 13/ /8 5/8 7305x10 15/ /4 3/4 7305x12 1-1/ /8 7/8 7305x14 1-1/ x16 1-3/ /4 1-1/4 7305x / /2 1-1/2 7305x x32 2-5/ Tube Tube atalog Hex 1 O.. O.. umber 1/4 1/4 7306x4 11/ /8 3/8 7306x6 13/ /2 3/8 7306x8x /2 1/2 7306x /4 3/4 7306x12 1-3/ x16 1-5/ x6x4 also available SPEITY HOSE HIGH OW & EIU ESSORRIES & S Y ISTRUTIOS ulkhead Union Stainless Steel o. 7337x (Ref. SE o ) TubE atalog Hex O.. umber 1/4 7325x4 11/ /8 7325x6 13/ /2 7325x /4 7325x12 1-3/ x16 1-5/ For bulkhead nuts see page 318. ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September PTERS & TUE HOSE ES TEHI T HOSE SSEY EQUIPET

6 PPITIO T Steel onnectors Ermeto onnectors vailable in Stainless Steel. OW & EIU HIGH SPEITY HOSE ESSORRIES & S Y ISTRUTIOS PTERS & HOSE ES HOSE SSEY EQUIPET ale onnector Stainless Steel o. 7217x (Ref. SE o ) Female onnector Stainless Steel o. 7267x (Ref. SE o ) 1 Tube ale Pipe atalog Hex 1 O.. Thread umber Opt. 1/8 1/8 7205x2 7/ /8 1/4 7205x2x4 9/ /16 1/8 7205x3 7/ /4 1/8 7205x4 1/ /4 1/4 7205x4x4 9/ /4 3/8 7205x4x6 3/ /4 1/2 7205x4x8 7/ /16 1/8 7205x5 9/ /16 1/4 7205x5x4 9/ /8 1/8 7205x6x2 5/ /8 1/4 7205x6 5/ /8 3/8 7205x6x6 3/ /8 1/2 7205x6x8 7/ /2 1/4 7205x8x4 13/ /2 3/8 7205x8 13/ /2 1/2 7205x8x8 7/ /2 3/4 7205x8x12 1-1/ /8 3/8 7205x10x6 15/ /8 1/2 7205x10 15/ /4 1/2 7205x12x8 1-1/ /4 3/4 7205x12 1-1/ /8 3/4 7205x14 1-1/ /4 7205x16x12 1-3/ x16 1-3/ /4 1-1/4 7205x / /2 1-1/2 7205x x32 2-5/ Tube Fem. Pipe atalog Hex O.. Thread umber 1/8 1/8 7255x2 9/ /16 1/8 7255x3 9/ /4 1/8 7255x4 9/ /4 1/4 7255x4x4 3/ /16 1/8 7255x5 9/ /8 1/4 7255x6 3/ /8 3/8 7255x6x6 7/ /2 1/4 7255x8x4 7/ /2 3/8 7255x8 7/ /2 1/2 7255x8x8 1-1/ /8 1/2 7255x10 1-1/ /4 3/4 7255x12 1-3/ /8 3/4 7255x14 1-3/ x16 1-5/ /4 1-1/4 7255x x6x8 also available TEHI T 320 ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September 2006

7 Steel onnectors Ermeto onnectors vailable in Stainless Steel. PPITIO T Straight Thread O-Ring onnector Stainless Steel o. 7327x (Ref. SE o ) Replacement O-rings page ale Elbow Stainless Steel o. 7367x (Ref. SE o ) 1 Tube Port atalog Hex 1 O.. Size umber Opt. 3/16 3/ x3 1/ /4 1/4 7315x4 9/ /4 5/ x4x5 5/ /4 3/8 7315x4x6 11/ /16 5/ x5 5/ /8 3/8 7315x6 11/ /8 1/2 7315x6x8 7/ /2 1/2 7315x8 7/ /2 5/8 7315x8x /2 3/4 7315x8x12 1-1/ /8 5/8 7315x /4 3/4 7315x12 1-1/ / x12x16 1-1/ /8 7/8 7315x14 1-3/ /4 7315x16x12 1-1/ x16 1-1/ /4 1-1/4 7315x20 1-7/ /2 1-1/2 7315x24 2-1/ x32 2-3/ Tube ale Pipe atalog 1 cross O.. Thread umber Flats 1/4 1/8 7355x /16 1/4 1/4 7355x4x /16 5/16 1/8 7355x /16 3/8 1/4 7355x /16 1/2 3/8 7355x /4 5/8 1/2 7355x /8 3/4 3/4 7355x / x /16 SPEITY HOSE HIGH OW & EIU ESSORRIES & S Y ISTRUTIOS Union Elbow Stainless Steel o. 7517x (Ref. SE o ) 1 TubE atalog cross O.. umber Flats 1/4 7505x /16 5/ x /2 3/8 7505x /16 1/2 7505x /4 5/8 7505x /8 3/4 7505x /16 7/8 7505x / x /16 1-1/4 7505x /8 1-1/2 7505x /8 ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September PTERS & TUE HOSE ES TEHI T HOSE SSEY EQUIPET

8 PPITIO T OW & EIU HIGH SPEITY HOSE ESSORRIES & S Y ISTRUTIOS PTERS & HOSE ES Steel onnectors Ermeto onnectors 90 ale Elbow Stainless Steel o. 7417x (Ref. SE o ) 90 Female Elbow 1 Stainless Steel o. 7467x (Ref. SE o ) Tube ale Pipe atalog 1 cross O.. Thread umber Flats 1/8 1/8 7405x /16 3/16 1/8 7405x /16 1/4 1/8 7405x /16 1/4 1/4 7405x4x /16 5/16 1/8 7405x /2 5/16 1/4 7405x5x /16 3/8 1/8 7405x6x /16 3/8 1/4 7405x /16 3/8 3/8 7405x6x /4 3/8 1/2 7405x6x /8 1/2 1/4 7405x8x /4 1/2 3/8 7405x /4 1/2 1/2 7405x8x /8 5/8 3/8 7405x10x /8 5/8 1/2 7405x /8 3/4 1/2 7405x12x /16 3/4 3/4 7405x /16 7/8 3/4 7405x /16 1 3/4 7405x16x / x /16 1-1/4 1-1/4 7405x /8 1-1/2 1-1/2 7405x / x /16 Tube Fem. Pipe atalog cross O.. Thread umber Flats 1/4 1/8 7455x /16 1/4 1/4 7455x4x /4 3/8 1/4 7455x /4 3/8 3/8 7455x6x /8 1/2 3/8 7455x /8 1/2 1/2 7455x8x /16 5/8 1/2 7455x /16 3/4 3/4 7455x /16 7/8 3/4 7455x / x /8 vailable in Stainless Steel. HOSE SSEY EQUIPET 90 Elbow - Straight Thread O-Ring Stainless Steel o. 7527x (Ref. SE o ) Tube Port atalog cross O.. Size umber Flats 1/4 1/4 7515x /16 5/16 5/ x /16 3/8 3/8 7515x /16 1/2 1/2 7515x /4 5/8 5/8 7515x /8 3/4 3/4 7515x /16 1 3/4 7515x16x / x /16 1-1/4 1-1/4 7515x /8 TEHI T 322 Replacement O-rings page 325. ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September 2006

9 Steel onnectors Ermeto onnectors vailable in Stainless Steel. PPITIO T Union Tee Stainless Steel o. 7717x (Ref. SE o ) ale Run Tee Stainless Steel o. 7767x (Ref. SE o ) TubE atalog cross O.. umber Flats 3/ x /16 1/4 7705x /16 5/ x /16 3/8 7705x /16 1/2 7705x /4 5/8 7705x /8 3/4 7705x /16 7/8 7705x / x /16 *7717x Tube ale Pipe atalog 1 cross O.. Thread umber Flats 1/4 1/8 7755x /16 1/4 1/4 7755x4x4x /16 3/8 1/4 7755x /16 1/2 3/8 7755x /4 1/2 1/2 7755x8x8x /8 5/8 1/2 7755x /8 3/4 3/4 7755x / x /16 SPEITY HOSE HIGH OW & EIU ESSORRIES & S Y ISTRUTIOS Female Run Tee (Ref. SE o ) Tube Fem. Pipe atalog cross O.. Thread umber Flats 1/4 1/8 7805x /16 1/4 1/4 7805x4x4x /4 3/8 1/4 7805x /4 1/2 3/8 7805x /8 5/8 1/2 7805x /16 3/4 3/4 7805x /16 PTERS & TUE HOSE ES 1 ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September TEHI T HOSE SSEY EQUIPET

10 PPITIO T OW & EIU Steel onnectors Ermeto onnectors Straight Thread O-Ring Run Tee Stainless Steel o. 7716x (Ref. SE o ) vailable in Stainless Steel. Tube Port atalog ROSS O.. Size umber d m n flats 1/4 1/4 7716x /16 3/8 3/8 7716x /16 1/2 1/2 7716x /4 HIGH SPEITY HOSE ESSORRIES & S Y ISTRUTIOS 1 1 ale ranch Tee Stainless Steel o. 7605x (Ref. SE o ) 1 male Tube Pipe atalog ROSS O.. thd. umber d d1 m n flats 1/4 1/8 7605x /16 1/4 1/4 7605x4x4x /16 5/16 1/8 7605x /16 3/8 1/4 7605x /16 1/2 3/8 7605x /4 1/2 1/2 7605x8x8x /8 5/8 1/2 7605x /8 3/4 3/4 7605x / x /16 PTERS & HOSE ES HOSE SSEY EQUIPET Female ranch Tee Stainless Steel o. 7655x (Ref. SE o ) 1 1 female Tube Pipe atalog ROSS O.. thd. umber d m n flats 1/4 1/8 7655x /16 1/4 1/4 7655x4x4x /4 3/8 1/4 7655x /4 1/2 3/8 7655x /8 5/8 1/2 7655x /16 3/4 3/4 7655x /16 7/8 3/4 7655x / x /8 1-1/4 1-1/4 7655x /8 TEHI T 324 ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September 2006

11 Steel onnectors Ermeto onnectors vailable in Stainless Steel. PPITIO T Straight Thread O-Ring ranch Tee Stainless Steel o. 7727x (Ref. SE o ) ross 1 Stainless Steel o. 7967x (Ref. SE o ) Tube Port atalog cross O.. Size umber Flats 1/4 1/4 7715x /16 3/8 3/8 7715x /16 1/2 1/2 7715x /4 Replacement O-rings see below. TubE atalog cross O.. umber Flats 1/4 7955x4* /16 3/8 7955x6* /16 1/2 7955x8* /4 *razed construction. SPEITY HOSE HIGH OW & EIU 1 1 ESSORRIES & S Y ISTRUTIOS Straight Thread O-Ring I.. aterial: una- 90 urometer Temperature Range: -40 F to +250 F (-40 to +121 ) Standard O-ring complies with SE J515 Type H. W TubE atalog W i.. O.. umber 1/ x1.058 ± ±.005 1/8 7629x2.064 ± ±.005 3/ x3.064 ± ±.005 1/4 7629x4.072 ± ±.005 5/ x5.072 ± ±.005 3/8 7629x6.078 ± ±.005 7/ x7.082 ± ±.005 1/2 7629x8.087 ± ±.005 5/8 7629x ± ±.005 3/4 7629x ± ±.006 7/8 7629x ± ± x ± ± /4 7629x ± ± /2 7629x ± ± x ± ±.010 ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September PTERS & TUE HOSE ES TEHI T HOSE SSEY EQUIPET

12 PPITIO T Steel onnectors Ready-ok dapters OW & EIU HIGH SPEITY HOSE ESSORRIES & S Y ISTRUTIOS ale Pipe To Female Ready-ok Swivel- Straight dapter Series: Ready-ok dapters. Typical pplication: General purpose low, medium, and high pressure hydraulics. Generally found in mining operations. Pressure: For use in hydraulic systems up to and including SE 100R12 pressures. aterial: arbon steel Plating: Zinc dvantages: Easy installation. Just lock components together with Ready-ok staples. Threadless design simplifies field service and cuts maintenance costs. Ordering Information: Order individually by catalog number. abel Set: FS-2200 ssembly instructions 1. ubricate the male Ready-ok fitting (including O-Ring). 2. ssemble male fitting into fe-male adapter until it bottoms. O-Ring will engage in internal mating surface. Insert staple into adapter. 3. When the staple is inserted through the adapter and engages the shoulder of the hose end as shown, the Ready-ok connection is complete. 4. To disassemble, remove the staple and disengage the hose assembly. Ready-ok ale onnector PipE atalog SizE THRE umber Hex 1/4 1/4 2008x4S /4 3/8 3/8 2008x6S /16 1/2 1/2 2008x8S /8 3/4 3/4 2008x12S / x16S /16 1-1/4 1-1/4 2008x20S /8 PTERS & HOSE ES HOSE SSEY EQUIPET ale Pipe To ale Ready-ok Straight Ready-ok ale onnector PipE atalog SizE THRE umber Hex 1/4 1/4 2013x4S /8 3/8 3/8 2013x6S /16 1/2 1/2 2013x8S /4 3/4 2013x12S / x16S /16 1-1/4 1-1/4 2013x20S /8 TEHI T 326 ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September 2006

13 Steel onnectors Ready-ok dapters ote: Order staples separately. PPITIO T ale Straight Thread O-Ring To Female Ready-ok Swivel Straight ale Straight Thread O-Ring To ale Ready- ok Straight Ready-ok Straight onnector Tube atalog Thread SizE Size umber SizE Hex 3/8 3/8 2020x6S 9/ /16 1/2 1/2 2020x8S 3/ /8 3/4 3/4 2020x12S 1-1/ / x16S 1-5/ /16 Ready-ok Straight onnector Tube atalog Thread SizE Size umber SizE x16S 1-15/ SPEITY HOSE HIGH OW & EIU ale Ready-ok To Female Ready-ok Swivel-Straight Ready-ok Ready-ok ale FemalE onnector onnector atalog SizE SizE umber 1/2 3/8 2015x8x6S /4 1/2 2015x12x8S /4 3/4 2015x20x12S / x20x16S 2.79 ESSORRIES & S Y ISTRUTIOS ale Ready-ok To ale Ready-ok Straight Ready-ok onnector atalog SizE umber 3/8 2016x6S /2 2016x8S /4 2016x12S x16S /4 2016x20S 2.63 PTERS & TUE HOSE ES ale Ready-ok Plug Ready-ok onnector atalog SizE umber 3/8 2017x6S /4 2017x12S x16S /4 2017x20S 1.61 ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September TEHI T HOSE SSEY EQUIPET

14 PPITIO T Steel onnectors Ready-ok dapters ote: Order staples separately. OW & EIU Ready-ok Female onnector Ready-ok onnector atalog SizE umber 1/4 2004x4S /8 2004x6S /2 2004x8S x16S HIGH SPEITY HOSE ESSORRIES & S Y ISTRUTIOS 45 Elbow ale Straight Thread O-Ring To Female Ready-ok Swivel 45 Elbow Female Ready-ok Swivel onnector ale Pipe To Female Ready-ok Swivel 90 Elbow Ready-ok Straight onnector Tube atalog Thread SizE Size umber SizE x16S 1-5/ Ready-ok onnector atalog SizE umber 1-1/4 2006x20S 2.01 Ready-ok ale onnector PipE atalog SizE THRE umber 3/8 3/8 2009x6S /2 1/2 2009x8S x16S PTERS & HOSE ES 90 Elbow ale Ready-ok To Female Ready-ok Ready-ok onnector atalog SizE umber 1/4 2014x4S /8 2014x6S /2 2014x8S /4 2014x20S HOSE SSEY EQUIPET TEHI T 90 Elbow Female Ready-ok Swivel onnector 328 Ready-ok onnector atalog SizE umber 3/8 2005x6S /2 2005x8S /4 2005x12S x16S /4 2005x20S 2.59 ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September 2006

15 Steel onnectors Ready-ok dapters ote: Order staples separately. PPITIO T Female Ready-ok Ready-ok ack-up Ring aterial: ylon 6/6 Ready-ok onnector SizE atalog umber 3/8 2019x6S 1/2 2019x8S 3/4 2019x12S x16S 1-1/4 2019x20S Ready-ok onnector atalog SizE umber 3/8 2007x6S 1.72 Ready-ok Staple Ready-ok onnector atalog SizE umber 3/8 2003x6 1/2 2003x x16 1-1/4 2003x20 SPEITY HOSE HIGH OW & EIU Ready-ok O-Ring aterial: una- 90 urometer Temperature Range: -40 F to +250 F (-40 to ) Standard O-Ring complies with SE specifications SE J515 Type H (Intro to adapter section page 243) Ready-ok onnector SizE atalog umber 1/4 2018x4S 3/8 2018x6S 1/2 2018x8S 3/4 2018x12S x16S 1-1/4 2018x20S ESSORRIES & S Y ISTRUTIOS PTERS & TUE HOSE ES ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September TEHI T HOSE SSEY EQUIPET

16 PPITIO T Steel onnectors Split Flange dapters and Kits OW & EIU HIGH SPEITY HOSE ESSORRIES & S Y ISTRUTIOS PTERS & HOSE ES HOSE SSEY EQUIPET dapter Used With Standard Female Swivel End (SE ode 61) Straight Weatherhead split flange adapter eliminates the need for special hose ends. Interconnect pumps and valves with SE flange outlets using low cost standard hose assemblies to replace equipment hose assembly. aterial: ow carbon steel. Plating: Zinc Pressure: ode PSI working pres sure (32 sizes 2500 PSI W.P.). abel Set: FS-300 ote: See page 376 for hydraulic 0-ring assortment 45 Elbow Tube ode 61 atalog ia. Thread Size Flange Size umber T Size 90 Elbow T T T Tube ode 61 atalog ia. Thread Size Flange Size umber T Size 1/2 1/ /4 16 1/2 3/ x /4 16 3/4 3/ / / / x / / x / /4 1-1/ / /2 1-1/ / /2 12 O-Ring not included. 1/2 1/ /4 16 1/2 3/ x /4 16 3/4 3/ / / / x / / x / /4 1-1/ / /2 1-1/ / /2 12 O-Ring not included. Tube ode 61 atalog ia. Thread Size Flange Size umber T Size 1/2 1/ /4 16 1/2 3/ x /4 16 3/4 3/ / / / x / / x / /4 1-1/ / /2 1-1/ / /2 12 O-Ring not included. TEHI T 330 ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September 2006

17 Steel onnectors Split Flange dapters and Kits PPITIO T Split Flange Kits SE Standard Pressure Series (ode 61) SE J518 O-Ring aterial: una- 90 urometer Temperature Range: -40 F to +250 F (-40 to ) Standard O-Ring complies with SE specification SE J515 Type H (See page 243 for O-Ring compound and application chart) Included in kit. atalog bolt ominal umber FlangE Torque FlangE omplete HalvES lok Range SizE kit 2 Req d. O-Ring olts WSHER b.-in. PTERS & TUE HOSE ES 1/2 SFK-08 8x251 8x252 8x853 8x / /4 SFK-12 12x251 12x252 12x853 12x / SFK-16 16x251 16x252 12x853 12x / /4 SFK-20 20x251 20x252 20x853 20x / /2 SFK-24 24x251 24x252 24x853 24x / SFK-32 32x251 32x252 24x853 24x / Flanges conform to SE J518. SPEITY HOSE HIGH OW & EIU ESSORRIES & S Y ISTRUTIOS ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September TEHI T HOSE SSEY EQUIPET

18 PPITIO T Steel onnectors Split Flange dapters and Kits OW & EIU HIGH SPEITY HOSE ESSORRIES & S Y ISTRUTIOS dapter Used With Standard Female Swivel End (SE ode 62) Straight Eaton split flange adapter eliminates the need for special hose ends. Interconnect pumps and valves with SE flange outlets using low cost standard hose assemblies to replace original equipment hose assembly. aterial: arbon steel. Plating: Zinc, Yellow ichromate finish. Pressure: ode PSI working pressure. abel Set: FS-300 ote: See page 408 for hydraulic 0-ring assortment. Tube ode 62 atalog ia. Thread Size Flange Size umber T Size 1/2 1/ /4 16 3/4 3/ / / /4 1-1/ / /2 1-1/ / / Elbow Tube ode 62 atalog ia. Thread Size Flange Size umber T Size T 1/2 1/ /4 16 3/4 3/ / / /4 1-1/ / /2 1-1/ / /2 12 T PTERS & HOSE ES HOSE SSEY EQUIPET 90 Elbow Tube ode 62 atalog ia. Thread Size Flange Size umber T Size T 1/2 1/ /4 16 3/4 3/ / / /4 1-1/ / /2 1-1/ / /2 12 TEHI T 332 ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September 2006

19 Steel onnectors Split Flange dapters and Kits PPITIO T Split Flange Kits SE High Pressure Series (ode 62) SE J518 O-Ring aterial: una- 90 urometer Temperature Range: -40 F to +250 F (-40 to ) Standard O-Ring complies with SE specifications SE J515 Type H (See page 243 for O-Ring compound and application chart) Included in kit. ote: ode 62 split flange kits cannot be used with Thick Flange Hose Ends. Use existing split flanges. atalog bolt ominal umber FlangE Torque FlangE omplete HalvES lok Range SizE kit 2 Req d. O-Ring olts WSHER b.-in. PTERS & TUE HOSE ES 1/2 SFK62-8 8x262 8x252 8x853 8x / /4 SFK x262 12x252 12x863 12x / SFK x262 16x252 16x863 20x / /4 SFK x262 20x252 20x863 24x / /2 SFK x262 24x252 24x863 24x / SFK x262 32x252 32x863 32x / Flanges conform to SE J518. SPEITY HOSE HIGH OW & EIU ESSORRIES & S Y ISTRUTIOS ETO Weatherhead Hose ssembly aster atalog W-HYOV-002-E1 September TEHI T HOSE SSEY EQUIPET

Adapters New to Eaton Weatherhead How to Order

Adapters New to Eaton Weatherhead How to Order PPITIO T dapters ew to Eaton Weatherhead How to Order OW & EIU ew Eaton dapter Part umbers dapter part numbers consist of a base number followed by a size designation. If the part number contains a T character

More information

Hose Clamps & Fittings

Hose Clamps & Fittings All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw

More information

Hose Fitting Selection Chart

Hose Fitting Selection Chart LOW/MEIUM Hose Fitting Selection hart PERMNENT REUSLE SERIES SERIES N SH SIZE RNGE* Zinc Plated Steel 903 3630 (-03 to -12), 3R30, 3130, 37L, 3800, 3840, 3580, 3440 (-04 to -08), 30T (-04 to-08) 90H 3630

More information

Instrumentation Pipe Fittings

Instrumentation Pipe Fittings Instrumentation Fittings 1 Instrumentation Fittings 1FM to Male dapter 1FP ap 1FPRU Reducer Union 1FPU Union 1HLN Hex Long Nipple 69 69 69 70 70 1HN Hex Nipple 1HRN Hex Reducing Nipple 1MPP Male Plug 1RFM

More information

PRODUCT TRAINING MANUAL

PRODUCT TRAINING MANUAL PRODUCT TRAINING MANUAL for BRASS PRODUCTS designed for $5.95 TABLE OF CONTENTS Fitting Identification Page Course Outline...........................1 Glossary..............................2-5 Safety Information........................6

More information

Aerospace. Light Weight and Flexible Qualified to Industry Standards. Fluid Conveyance

Aerospace. Light Weight and Flexible Qualified to Industry Standards. Fluid Conveyance Aerospace Fluid Conveyance Aeroquip Brand Rubber Hose, & Assemblies for Aerospace Applications Light and Flexible Qualified to Industry Standards 303, 302A Medium Pressure Hose,, and Assemblies Construction:

More information

Adapters. The World Standard. Pipe Fittings. Metric Adapters. ISO Port Adapters. Garden Hose Fittings

Adapters. The World Standard. Pipe Fittings. Metric Adapters. ISO Port Adapters. Garden Hose Fittings Adapters Pipe ittings SAE Standards ryseal Threads orgings & Extrusions etric Adapters Economical Reusable orgings & Extrusions ISO Port Adapters eets ISO 649-3 Requirements eets SAE 2244-3 Requirements

More information

FEMALE WELD BUNG HIGH FLOW MALE AN WELD BUNG

FEMALE WELD BUNG HIGH FLOW MALE AN WELD BUNG FEMALE WELD BUNG These female weld-in bungs simplify tank fabrication. Choose from NPT or AN style bungs both in aluminum and steel. HIGH FLOW MALE AN WELD BUNG Precision CNC machined and available in

More information

Couplings for Gates Hoses 7 Combination Nipple

Couplings for Gates Hoses 7 Combination Nipple Supersedes 1 Long Shank Couplings for Gates Hoses 7 Combination Nipple Description: Cast brass, serrated shank, set has hex male and hex swivel female couplings, with a washer seal. Threads are GHT or

More information

PARTS LIST EXTRACTOR ACCESSORIES

PARTS LIST EXTRACTOR ACCESSORIES PARTS LIST EXTRACTOR ACCESSORIES 3 - JET WAND - 4097101 101 4097961 HANDLE ASSEMBLY - INCLUDES: 1 102 9121210 1/4-20 X 5/8 HEX BOLT 2 103 ---------- HANDLE CLAMP 1 104 9120920 1/4-20 HEX NUT 2 105 9120777

More information

Upchurch LOW PRESSURE FITTINGS AND CONNECTORS

Upchurch LOW PRESSURE FITTINGS AND CONNECTORS AND CONNECTORS Flangeless Fittings Upchurch Flangeless Fittings Upchurch Scientific Flangeless Fittings eliminate the need to flange tubing. This removable and reusable system provides several benefits:

More information

CONSTRUCTION Straights and shapes are manufactured from CA360, CA345 or CA377 brass

CONSTRUCTION Straights and shapes are manufactured from CA360, CA345 or CA377 brass CONSTRUCTION Straights and shapes are manufactured from CA360, CA345 or CA377 brass ADVANTAGES Large range of styles and sizes Some shapes are offered in either extruded or forged patterns APPLICATIONS

More information

4567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123

More information

Synflex Assembly Equipment and Accessories

Synflex Assembly Equipment and Accessories Synflex Assembly Equipment and Accessories H1 Synflex Swaging Machines SST and Mark IX Designed to Attach Synflex Permanent Fittings to Synflex Hose Synflex swaging equipment produces smooth, uniform fitting

More information

For draining expansion tanks, other liquid storage vessels.

For draining expansion tanks, other liquid storage vessels. Plumbing Specialties 26-100 & 26-300 SERIES COMPRESSION GAUGE COCKS For draining expansion tanks, other liquid storage vessels. 26-100: rated up to 125 psig 26-300: soft metal seat/stuffing box rated up

More information

Dual-Lock. dixonvalve.com Customer Service:

Dual-Lock. dixonvalve.com Customer Service: UFCTURING QULITY SERVICE MNUFCTURING QULITY SERVICE MNUFCTURING QULITY SERVICE MNUFCTU Dual-Lock dixonvalve.com Customer Service: 877.963.4966 Quick cting Couplings Dual-Lock couplings allow full air flow

More information

Operating Instructions

Operating Instructions Operating Instructions Medium and High Pressure Model Numbers: RT602- RT635- RT602- RT635- RT603- RT650- RT603- RT650- RT605- RT825- RT605- RT650-SM RT802- RT835- RT425- RT803- RT402- RT435- RT625- RT403-

More information

Metal & Teflon Lined Hose

Metal & Teflon Lined Hose May 2001 Metal & Teflon Lined Hose Components & Controls, Inc. 493 Washington Avenue Carlstadt, NJ 07072 201-438-9190 212-564-5541 Fax: 201-438-3356 www.componentsandcontrols.com Components & Controls,

More information

SteadiCam Parts List*

SteadiCam Parts List* SteadiCam Parts List* A. 1 Bogen 3232 Monopod Swivel Tilt Head B. 1 1/2 internal to 1/2 external brass bushing flare adapter (part 9402249 at osh.com¹) C. 2 3/8 internal to 1/2 external brass bushing flare

More information

Dual-Lock. dixonvalve.com Customer Service:

Dual-Lock. dixonvalve.com Customer Service: UFCTURING QULITY SERVICE MNUFCTURING QULITY SERVICE MNUFCTURING QULITY SERVICE MNUFCTU Dual-Lock dixonvalve.com Customer Service: 877.963.4966 Dual-Lock Quick cting Couplings Dual-Lock couplings allow

More information

Berkeley Cast Iron Impeller B4EYRMBH BEARING FRAME MOUNT. Flanged Case, Packing Construction. Table I

Berkeley Cast Iron Impeller B4EYRMBH BEARING FRAME MOUNT. Flanged Case, Packing Construction. Table I Cast Iron Flanged, Packing Construction B4EYRMBH Page 0. Date March 4, 03 Supersedes /0/09 9 3 3 8 8 B/M B53 CW M L034.88" 3C 5 8 3B 80 A 3A 3 See Supplement B 9 3, See See Shaft (Not sold separately)

More information

Dual-Lock Quick Acting Couplings

Dual-Lock Quick Acting Couplings Thor Dual Lock Dual-Lock Quick cting Couplings Dual-Lock couplings allow full air for general purpose air and pneumatic impact tools. handling requiring high Service: The recommended working pressure for

More information

Synflex. Mini Catalog

Synflex. Mini Catalog Synflex Mini Catalog Table of Contents Hose Selection Chart Core 5 Hoses (Application/Product) 2 3R30, 3130, 3580, 30CT, 3R80 Core 5 Hoses (Product) 2 3R30, 3130, 3580, 30CT, 3R80 Hose 3R30 Low Pressure

More information

2-3-5 Valve Manifolds

2-3-5 Valve Manifolds 2-3-5 Valve Manifolds range of Valve Manifolds offer a safe and economical method of installation to control and measure pressure of liquids and gaseous media. They are ruggedly manufactured and precision

More information

T&B Fittings. Industrial Fittings. Liquidtight Flexible Nonmetallic Conduit Fittings. Specifications Type A Conduit Fittings

T&B Fittings. Industrial Fittings. Liquidtight Flexible Nonmetallic Conduit Fittings. Specifications Type A Conduit Fittings T& Fittings Liquidtight Flexible Nonmetallic onduit Fittings Specifications Type onduit Fittings Series 6302 Liquidtight Flexible Nonmetallic onduit Fittings pplication To provide a liquidtight, dustight

More information

Operating Instructions

Operating Instructions Operating Instructions Series RT Spring Driven Hose Reels Low Pressure Model Numbers: RT402-OLP RT605-OLP RT450-OLP RT835-OLP RT403-OLP RT802-OLP RT465-OLP RT850-OLP RT405-OLP RT803-OLP RT625-OLP RT450-OLPSM

More information

INSTALLATION GUIDELINES

INSTALLATION GUIDELINES IMPORTANT: To ensure this product is installed properly, you must read and follow these guidelines. The owner/user of this product must keep this information for future reference. This product must be

More information

REUSABLE ALUMINUM SWIVEL FITTINGS REUSABLE ALUMINUM LIGHTWEIGHT CRIMP SWIVEL FITTINGS OTHER REUSABLE ALUMINUM FITTINGS SOCKETLESS HOSE

REUSABLE ALUMINUM SWIVEL FITTINGS REUSABLE ALUMINUM LIGHTWEIGHT CRIMP SWIVEL FITTINGS OTHER REUSABLE ALUMINUM FITTINGS SOCKETLESS HOSE 283 STAINLESS STEEL BRAIDED RACING HOSE Aeroquip Racing Hose is compatible with petroleum and synthetic lubricants and may be used in fuel, lube, coolant and air applications. Lightweight and flexible,

More information

Integrated Process Solutions

Integrated Process Solutions Integrated Process Solutions w w w. m k s i n s t. c o m Series 31 ISO-KF fittings Sizes to 0 ( to 4'') Series 31 is a line of ISO-KF standard vacuum components. The ISO-KF system refers to the family

More information

Advantage Plus TIM-3600 Series Reel

Advantage Plus TIM-3600 Series Reel Read the following precautions and instructions before you begin assembly or using. Failure to comply with these instructions could result in personal injury or property damage. Keep these instructions

More information

Southco 64 Push-to-Close Latch Visible, Locking, Slide Bolt

Southco 64 Push-to-Close Latch Visible, Locking, Slide Bolt Southco 64 Push-to-Close Latch, Locking, Slide olt 139.7 (5.50) 10.2 (.40) 108 (4.25) 4X Ø H RIVET LTCHES ONLY 22.6 (.89) Push-to-Close Latches 1.2 (.05) 45.1 (1.78) NON-LOCKING LOCKING* 23.4 (.92) TYPE

More information

Electrical Specifications. Dimensions (inches)

Electrical Specifications. Dimensions (inches) Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power

More information

Electrical Specifications. Dimensions (inches)

Electrical Specifications. Dimensions (inches) Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power

More information

NEEDLE VALVES AND PLUG VALVES

NEEDLE VALVES AND PLUG VALVES Product Line THE CREATION OF AN INDUSTRY In the mid 1940 s, Cullen Crawford founded the Crawford Fitting Company. Mr. Crawford developed and patented the original flareless fitting (nut and two ferrule

More information

Section N Micro-D Uni-Saver, Hardware and Accessories

Section N Micro-D Uni-Saver, Hardware and Accessories Section Micro-D Uni-Saver, Hardware and ccessories Micro-D ccessories product selection guide Micro-D Uni-Saver lways in stock,these feed-thru pin-socket adapters feature an innovative design using a single

More information

CS-LOK Tube Fittings

CS-LOK Tube Fittings CS-LOK Tube Fittings The Tylok Philosophy Our Mission It is our mission, at Tylok International, Inc., to continuously strive for and achieve total customer satisfaction with both our products and services.

More information

Specifications. According to CEC Rule Please Note

Specifications. According to CEC Rule Please Note T& Fittings rmoured able and Flexible Metal onduit Fittings Specifications rmoured able (Type 90) Ref. E Rule 12-600 The anadian Electric ode 2012 Part I defines type armoured cable as, fabricated assembly

More information

Gates Hose Cutter Model 6-32 For six-wire spiral and two-wire braid hose through 2" I.D. Product Number: Clean Easy Cuts Safe Operation

Gates Hose Cutter Model 6-32 For six-wire spiral and two-wire braid hose through 2 I.D. Product Number: Clean Easy Cuts Safe Operation Standard Hydraulic Hose Specialized Mining Couplings, Adapters and Accessories Specialized Mining Hose Product Information Gates Power Cutter 208 Product : 7480-6609 Effortless Straight Cuts Every Time

More information

300 Model 870 Four Wheel Hose Cart Owner s Manual

300 Model 870 Four Wheel Hose Cart Owner s Manual 300 Model 870 Four Wheel Hose Cart Owner s Manual IMPORTANT: READ THE OWNER S MANUAL BEFORE ASSEMBLING TOOLS REQUIRED: TWO ADJUSTABLE WRENCHES; HAND PUMP Estimated assembly time: 30 minutes PARTS LIST

More information

INSTALLATION INSTRUCTIONS TOWNSEND

INSTALLATION INSTRUCTIONS TOWNSEND INSTALLATION INSTRUCTIONS TOWNSEND.00 DECK MOUNT BATH FILLER.0 Thank you for selecting American Standard... the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly-please

More information

MANIFOLDS AND NEEDLE VALVES

MANIFOLDS AND NEEDLE VALVES Product Line THE CREATION OF AN INDUSTRY In the mid 1940 s, Cullen Crawford founded the Crawford Fitting Company. Mr. Crawford developed and patented the original flareless fitting (nut and two ferrule

More information

Hose Assembly Equipment

Hose Assembly Equipment atalog 4400 US ittings rimping -1 Products ivision atalog 4400 US Visual Index Model No. 339 & 239 - ut-off Machine Model No. 332T-115V - ut-off Machine Model No. 631075 - Karrykut ut-off Machine TH8-400

More information

Swagelok Thermoplastic Hose Hand Swager User s Manual

Swagelok Thermoplastic Hose Hand Swager User s Manual Swagelok Thermoplastic Hose Hand Swager User s Manual Thermoplastic Hose Hand Swager User s Manual Contents Hand Swager Components....................... 2 Setup Swager.......................................

More information

Visit us at 5170 N 125th St. Butler WI or online at 197

Visit us at 5170 N 125th St. Butler WI or online at  197 Never uses a clamp Lightweight and durable Smooth elastomer inner tube 250 psi operating pressure Temperature range -40 F to 300 F Sold by running foot Textile braid reinforcement available in Black and

More information

1 Specifications. 2 1¼" through 4" Standard and Long Holedall Swaged Couplings

1 Specifications. 2 1¼ through 4 Standard and Long Holedall Swaged Couplings 100 Ton Ram Table of Contents Holedall Concept 1 Specifications 2 1¼" through 4" Standard and Long Holedall Swaged Couplings 3 1¼" through 4" Standard and Long Flanged Holedall Swaged Couplings using Collar

More information

Continental Industries CON-STAB ID SEAL FITTINGS or FAX Visit

Continental Industries CON-STAB ID SEAL FITTINGS or FAX Visit Continental Industries CON-STAB ID SEAL FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958

More information

Dual-Lock. P-Series. dixonvalve.com Customer Service:

Dual-Lock. P-Series. dixonvalve.com Customer Service: UFCTURING QULITY SERVICE MNUFCTURING QULITY SERVICE MNUFCTURING QULITY SERVICE MNUFCT Dual-Lock P-Series dixonvalve.com Customer Service: 877.963.4966 pplication: full flow coupling used on utility air,

More information

CONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9

CONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9 CONTENTS PAGE NUMBER Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5 Hoist Rings Center Pull 6 Side Pull 7 Socket Head Stripper Bolts Inch 8 Metric 9 Punch Holder Shanks 10 Roller Stock Guides 11

More information

get connected with Bradford fittings & valves Bradford Company, Inc

get connected with Bradford fittings & valves Bradford Company, Inc get connected with Bradford fittings & valves Bradford Company, Inc. 800.789.1718 www.bradfordfittings.com Bradford your top quality, sanitary stainless steel fittings & valves manufacturer serving you

More information

Tuf-Lite III Fans 4000KW Series Hub

Tuf-Lite III Fans 4000KW Series Hub Tuf-Lite III Fans 4000KW Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 11 through 20 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass

More information

I- 39. Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General Information and special features.

I- 39. Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General Information and special features. Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General nformation and special features. - 39 Seal out oil, water, dirt, dust and fumes wherever liquidtight flexible metal conduit

More information

BROEN UNIFLEX FITTINGS FOR WATER BROEN UNIFLEX TM FITTINGS FOR WATER

BROEN UNIFLEX FITTINGS FOR WATER BROEN UNIFLEX TM FITTINGS FOR WATER BROEN UNIFLEX FITTINGS FOR WATER TABLE OF CONTENTS Content Page Table of Contents 2 BROEN UniFlex TM BASIC 4 Product Overview 5 Water Fittings Bench Mounted Fitting with Swivel Spout... 6 Single Handle

More information

SUBMITTAL PACKAGE FLEXIBLE SPRINKLER DROP

SUBMITTAL PACKAGE FLEXIBLE SPRINKLER DROP SUBMITTAL PACKAGE FLEXIBLE SPRINKLER DROP BRAIDED CONNECTIONS...pg 2-6 UNBRAIDED CONNECTIONS...pg 7-9 INSTALLATION...pg 10 ACCESSORIES...pg 11 6/26/2018 BRAIDED CONNECTIONS ARGCO Flexible Sprinkler Drops

More information

Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub

Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 32.8 or 10 Meter Diameter Hudson Tuf-Lite and Tuf-Lite II fan blades Hudson Tuf-Lite (black) fan blades

More information

Operating Instructions

Operating Instructions Operating Instructions SD13035 OLP SD13050 OMP SD14005 OVP SD13050 OLP SD13000 OMP FSD13035 OLP SD13000 OLP SD13035 OVP FSD13050 OLP SD14035 OLP SD13050 OVP FSD13000 OLP SD14050 OLP SD13000 OVP FSD14035

More information

The unique fitting design provides a swivel at both ends of the hose assembly.

The unique fitting design provides a swivel at both ends of the hose assembly. The Tramec Sloan Live Swivel system of heavy duty air brake hose assemblies meet and exceed all requirements of FMVSS 106 and SAE J1402. Each end fitting is labeled with certification to the federal standards.

More information

TOOLING COMPONENTS. tel fax Clamping Kits Step Blocks...7. Driver Studs...

TOOLING COMPONENTS.  tel fax Clamping Kits Step Blocks...7. Driver Studs... Clamping Kits... 2-8 Step Blocks...7 Driver Studs... 9-13 Bolts, Screws... 14-20 Nuts, Washers... 21-29 Sex Bolts... 30-31 Clamps... 32-44 Screws... 45-49 Knobs & Levers... 49-53 Rest Pads...54 Index Plungers...

More information

Automated Tiki Torch Installation Instructions

Automated Tiki Torch Installation Instructions Automated Tiki Torch Installation Instructions Automated Tiki Torch with Poles (Exploded View) 14 Automated Tiki Head 6 8 Tiki Pole (Powder Coated Aluminum or Faux Bamboo Pole) 18 Base Pole (Powder Coated

More information

ASSEMBLY GUIDE. Customer Service: INCH² 2-BURNER & 864 INCH² 2-BURNER

ASSEMBLY GUIDE. Customer Service: INCH² 2-BURNER & 864 INCH² 2-BURNER ASSEMBLY GUIDE 688 INCH² 2-BURNER & 864 INCH² 2-BURNER DANGER If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flames. 3. Open lid. 4. If odor continues, keep away from the appliance

More information

Tank. Part B, Section 1. This section covers the following unit configurations. Pump Piston Pump (E or G)

Tank. Part B, Section 1. This section covers the following unit configurations. Pump Piston Pump (E or G) Part B, ection Model Voltage This section covers the following unit configurations. 3400V All Pump Piston Pump (E or G) Manifold Control 4-Port (A) Vista tandard (V) Vista Pattern (PC) Vista Temperature

More information

Clay & Bailey Mfg. Co.

Clay & Bailey Mfg. Co. Clay & Bailey Mfg. Co. VENTING GUIDE & PRODUCT CATALOG for Aboveground Storage Tanks new products! new products! Emergency Vents NOW UL Listed! Emergency Vents NOW UL Listed! 9/12 Clay & Bailey Mfg. Co.

More information

EcON-O-fit HOSE clamps

EcON-O-fit HOSE clamps PERFORMANCE ENGINE COOLING EcON-O-fit HOSE clamps ECON-O-FIT is the original anodized aluminum hose clamp cover. Its appearance dresses up any installation. ECON-O-FIT s specially designed interior grooving

More information

Model SBS-10. Stainless Steel Simplex Basket Strainer. 21 Columbus Avenue Garfield, NJ 07026

Model SBS-10. Stainless Steel Simplex Basket Strainer. 21 Columbus Avenue Garfield, NJ 07026 Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model SBS-10 Stainless Steel Simplex Basket Strainer 1/6 Stainless

More information

Liberty Process Equipment, Inc.

Liberty Process Equipment, Inc. AP - Operation & Assembly Speed, temperature, viscosity, suction lift, discharge pressure, abrasive content and corrosive action of the liquid be handled should all be considered in applying these pumps.

More information

Installation Instructions

Installation Instructions THE COLLECTION by Installation Instructions 0 BIDET FITTING Thank you for selecting American-Standard...the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly--please

More information

Value-Line 1", 2" & 3" (DN 25, 50 & 80) Series 6FRF 2-Piece Ball Valves. Installation, Maintenance and Operating Instructions

Value-Line 1, 2 & 3 (DN 25, 50 & 80) Series 6FRF 2-Piece Ball Valves. Installation, Maintenance and Operating Instructions Value-Line 1", 2" & 3" (DN 25, 50 & 80) Series 6FRF 2-Piece Ball Valves Installation, Maintenance and Operating Instructions IMO-R24 5/2013 2 IMO-R24 Table of Contents 1 GENERAL....................................

More information

Weld-on Nut. Protection Ring SW41 M27 23 FWZ Steel. Dia. A. Dia. B R10. Part-No.

Weld-on Nut. Protection Ring SW41 M27 23 FWZ Steel. Dia. A. Dia. B R10. Part-No. 8.11 Accessory parts Table of Contents Protection parts for lubrication points Weld-on nut 8.11.2 Protection ring 8.11.2 Protector for lubrication points 8.11.3 Weld-on piece for lubrication points 8.11.3

More information

BEV-TENT COMPONENTS. Made in South Africa

BEV-TENT COMPONENTS. Made in South Africa BEV-TENT COMPONENTS REB MARKETING Distributing Agent Tel: (011) 452 9131 Cell: 072 965 6792 Fax: (011) 609 4615 15 Imvubu Road, Sebenza Ext 6, Edenvale orders@rebmarketing.co.za BEV-TENT 001 90 deg Elbow

More information

LOUISIANA BURNER / The Millers and the staff of Louisiana Burner

LOUISIANA BURNER /   The Millers and the staff of Louisiana Burner Louisiana Burner 634 Main Street Pineville, LA 71360 318 318--473 473--2868 Fax 318 318--473 473--2807 www.louisianaburners.com catalog2016 LOUISIANA BURNER Dear Customers, Last year, the Miller Family

More information

Two Piece Low Torque Kelly Valve

Two Piece Low Torque Kelly Valve Two Piece Low Torque Kelly Valve Disassembly and Assembly Procedures Global Manufacturing, Inc. Lafayette, Louisiana USA 70508 Ph (337) 237-1727 Fax (337) 232-9353 SAFETY CONSIDERATIONS Safety glasses

More information

Installation Instructions for Wall Mount, Deck Mount and Pre-rinse Faucets

Installation Instructions for Wall Mount, Deck Mount and Pre-rinse Faucets Installation Instructions for Wall Mount, Deck Mount and Pre-rinse Faucets SAVE FOR END USER ELKAY 2222 CAMDEN COURT OAK BROOK, IL 60523 USA WALL MOUNT ASSEMBLY General Instructions Turn off the water

More information

Urea/Adblue Hose Reel

Urea/Adblue Hose Reel www.scintex.com.au sales@scintex.com.au Model: SHR3408 Urea/Adblue Hose Reel Product Manual Specifications Spring driven drum: for automatic rewind. Locking ratchet: to maintain the desired length of hose

More information

Metal Clad Cable, Armored Cable and Flexible Metal Conduit Fittings

Metal Clad Cable, Armored Cable and Flexible Metal Conduit Fittings Metal lad able, rmored able and Flexible Metal Metal lad able, rmored able and Flexible Metal onduit rmored able (Type ) Ref. NE rticle 20 National Electrical ode defines type armored cable as, fabricated

More information

ACCESSORIES 5:05 5:05 PRODUCT CATALOGUE 189

ACCESSORIES 5:05 5:05 PRODUCT CATALOGUE 189 ACCESSORIES 5:05 5:05 PRODUCT CATALOGUE 189 HYDROSCAND ACCESSORIES PRODUCT GROUP 500, 505, 507 OCH 510 This product group includes products that complement Hydroscand s range of hoses and fluid connectors,

More information

Section Ton Ram Operating Instructions for 1-1/4" through 4" Standard & Long Holedall Swaged Couplings

Section Ton Ram Operating Instructions for 1-1/4 through 4 Standard & Long Holedall Swaged Couplings 100 Ton Ram Operating Instructions for 1-1/4" through 4" Standard & Long Holedall Swaged Couplings Dixon Valve & Coupling Company 800 High Street Chestertown, MD 21620 ph: 800 355 1991 fax: 800 283 4966

More information

Parts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns:

Parts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns: 7-1 Section 7 Using the Illustrated List The parts lists provided in this section are organized into the following columns: Item Identifies illustrated parts that are available from Nordson Corporation.

More information

Fugitive Emission Test Report

Fugitive Emission Test Report Fugitive Emission Test Report API 624 1 st Edition Standard Performed for Clark Reliance Corp. 2015 Jerguson 70 Series ½ Class 800 Carbon Steel Gage Valve Met Qualifications Set Forth In API 624 1 st Edition

More information

Ball Valve Manual Balance Hose Kits - Submittal

Ball Valve Manual Balance Hose Kits - Submittal Ball Valve Manual Balance Hose Kits - Submittal Hose Kit Size *MFR 1/2" 5 3/4" 11 1" 20 1-1/4" 30 **1-1/2" 44 **2" 78 Qty. *MFR (Max. Flow Recommendations) calculated at 8 fps. **1-1/2 and 2 hose kits

More information

COOPER FREESTANDING TUB FAUCET INSTALLATION

COOPER FREESTANDING TUB FAUCET INSTALLATION SKU(s): 940972 COOPER FREESTANDING TUB FAUCET INSTALLATION BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no

More information

SERVICE PARTS LIST AND ASSEMBLY INSTRUCTIONS

SERVICE PARTS LIST AND ASSEMBLY INSTRUCTIONS R Transport Air Conditioning FlexCLIK 58-64105-03 #12 [16MM], 35 Bar, SAE J2064 Type E FlexCLIK 58-64105-02 #10 [13MM], 35 Bar, SAE J2064 Type E FlexCLIK 58-64105-01 #8 [10MM], 35 Bar, SAE J2064 Type E

More information

Graphite Ribbon/Filament Packing for Fisher Sliding Stem Valves

Graphite Ribbon/Filament Packing for Fisher Sliding Stem Valves Instruction Manual Graphite Packing for Sliding-Stem Graphite Ribbon/Filament Packing for Fisher Sliding Stem Valves Contents Introduction... 1 Scope of Manual... 1 Description... 1 Storage and Startup...

More information

Blue Series Hot Melt Hose with RediFlext II Hanger System

Blue Series Hot Melt Hose with RediFlext II Hanger System Instruction Sheet P/N 1124594_01 Blue Series Hot Melt Hose with RediFlext II Hanger System Safety WARNING! Allow only personnel with appropriate training and experience to operate or service the equipment.

More information

PARTS LIST CHARGER 2022 ABLT

PARTS LIST CHARGER 2022 ABLT PARTS LIST CHARGER 2022 ABLT HEAD ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 5990731 SPRING CLIP PAD HOLDER SET INCLUDES: 1 101A 9120205 #8 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW PACK OF 3 3 102 9121490

More information

DC 700 Series Hose Reel - September 2010

DC 700 Series Hose Reel - September 2010 Instructions Parts List Service Manual DC 700 Series Hose Reel - September 2010 Suitable for dispensing, transfer and evacuation of lubricants, fuels, air & other automotive & industrial products. To be

More information

3/8 BORE MOUNTING BRACKETS

3/8 BORE MOUNTING BRACKETS 3/8 BORE MOUNTING BRACKETS 11767 Ceramic Insulator Use with cylinder having #8-32 threaded shaft to insulate cylinder from heat or electricity #8-32 thd. - thru dia. Male Clevis 11996 Mounts in rear of

More information

Your Artificial Lift Experts. Oilfield Equipment. upcglobal.com

Your Artificial Lift Experts. Oilfield Equipment. upcglobal.com Your Artificial Lift Experts Oilfield Equipment upcglobal.com Your Artificial Lift Experts Oilfield Equipment upcglobal.com No. 142 Stringing-Up Link No. 14 Triangle C Link The Stringing-up link is used

More information

BEV-TENT COMPONENTS. Made in South Africa

BEV-TENT COMPONENTS. Made in South Africa BEV-TENT COMPONENTS REB MARKETING Distributing Agent Tel: (011) 452 9131 Cell: 072 965 6792 Fax: (011) 609 4615 15 Imvubu Road, Sebenza Ext 6, Edenvale orders@rebmarketing.co.za BEV-TENT 001 90 deg Elbow

More information

CORALAIS THREE-HANDLE BATH/SHOWER FAUCET

CORALAIS THREE-HANDLE BATH/SHOWER FAUCET INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN NOTES CAUTION: Risk of product damage. Remove plaster guards, valve units, diverter and diverter sleeve before you apply heat to yoke. Shut off the main water

More information

HOW TO USE THE COUPLING SECTION

HOW TO USE THE COUPLING SECTION HOW TO USE THE COUPLING SECTION NOTE: Because the hose/coupling interface is critical to hose assembly performance, always follow the specific instructions of hose and coupling manufacturers regarding

More information

WORKHOLDING COMPONENTS

WORKHOLDING COMPONENTS Adjustable Clamp Heels... 274 Adjustable Clamp Rests...273 Adjustable Step Blocks...284 Assemblies, Spherical Flange...260 Bolts, Dovetail...258 Bolts, Swing... 241 Bolts, T...258 Bolts, T-Slot...257 Bolts,

More information

Burner Plumbing on the Appalachian Center for Craft Crossdraft Soda Kiln

Burner Plumbing on the Appalachian Center for Craft Crossdraft Soda Kiln Tennessee Tech University Appalachian Center for Craft Clay Studio Vince Pitelka, 2014 Burner Plumbing on the Appalachian Center for Craft Crossdraft Soda Kiln This kiln is 20 cubic feet interior space,

More information

D Series / Screwed Bonnet Screwed End - Full Opening Ductile Iron Swing Checks

D Series / Screwed Bonnet Screwed End - Full Opening Ductile Iron Swing Checks 5.2016.15.k 1 Swing Check Valves D Series / Screwed onnet Screwed End - Full Opening Ductile Iron Swing Checks C C Threaded Swing Checks Pressure 1 2 3 4 300# D300-1 D300-2 D300-3 D300-4 600# D600-1 D600-2

More information

Eaton Winner Hose and Fittings. North America

Eaton Winner Hose and Fittings. North America Eaton Winner Hose and Fittings North America Table of contents Contents Safety and Ordering Information 3 Warranty Information 3 Hose EC115 EN857 1SC Braided Hose 5 EC215 EN857 2SC Braided Hose 5 EC118

More information

Otter Pro XT Cabin Installation and Set-Up Instructions

Otter Pro XT Cabin Installation and Set-Up Instructions Otter Pro XT Cabin Installation and Set-Up Instructions Otter Pro XT Cabin Fits Medium Otter Pro and Otter II Sled Only Parts Identification and Check List MODEL NUMBERS: Complete Pkg Pro XT Thermal Cabin

More information

Model 698/ and Model in 1 Hose Reel Owner s Manual

Model 698/ and Model in 1 Hose Reel Owner s Manual Model 698/694 200 and Model 706 100 4 in 1 Hose Reel Owner s Manual 698/694 706 VISIT OUR WEBSITE: WWW.LIBERTYGARDENPRODUCTS.COM OR CALL US TOLL FREE AT 1-866-820-5805 LIBERTY GARDEN PRODUCTS, INC. 500

More information

MR98 Series Backpressure Regulators, Relief and Differential Relief valves

MR98 Series Backpressure Regulators, Relief and Differential Relief valves MR98 Series Instruction Manual January 2015 MR98 Series Backpressure Regulators, Relief and Differential Relief valves P1757 TyPe MR98L P1753 TyPe MR98H D103588X012 Figure 1. Typical MR98 Series Backpressure

More information

2100 Series Series Emergency Pressure Relief Vent and Manhole Cover. North America Only. Table of Contents. Introduction. Scope of the Manual

2100 Series Series Emergency Pressure Relief Vent and Manhole Cover. North America Only. Table of Contents. Introduction. Scope of the Manual Instruction Manual D103823X012 September 2017 Emergency Pressure Relief Vent and Manhole Cover Table of Contents Introduction...1 Specifications...2 Product Identification and Marking...3 Principle of

More information

Hoses and Accessories PTFE Hoses. Contents. Introduction

Hoses and Accessories PTFE Hoses. Contents. Introduction Contents Introduction... 1 Guidelines for fitting hose... 2 RX Eriflon-F 621 MD... 4 RX Eriflon-F 621 HD... 5 RX Eriflon-F 622 HD... 6 RX Eriflon-C4 Chlorine... 7 RX Eriflon-F 614... 8 RX Eriflon -F 511...

More information

Section B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1

Section B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1 Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe

More information

PARTS LIST COLT COLT HEPA

PARTS LIST COLT COLT HEPA PARTS LIST COLT 800-1250 - 1450 COLT HEPA - 1250-1450 MOTOR / LID ITEM PART NO. PART DESCRIPTION QTY. 101 0891201 TOP COVER 1 102 0294341 TOP MOTOR SEAL 1 103 0299861 STRAIN RELIEF CORD CLAMP 1 104 0891131

More information