Southco 64 Push-to-Close Latch Visible, Locking, Slide Bolt

Transcription

1 Southco 64 Push-to-Close Latch, Locking, Slide olt (5.50) 10.2 (.40) 108 (4.25) 4X Ø H RIVET LTCHES ONLY 22.6 (.89) Push-to-Close Latches 1.2 (.05) 45.1 (1.78) NON-LOCKING LOCKING* 23.4 (.92) TYPE XX XX WELD XX XX RIVET XX XX RIVET 5.2 * 2 flat keys on a ring supplied, locks are keyed alike to CH751. ØH XX designates Paddle and Cup Material & Finish in Part Number Table as follows: -10 = Steel, zinc plated -20 = Stainless steel -30 = Steel, preplated -50 = Steel, black CUP, PDDLE, RCKET: Low carbon steel or stainless steel, see part number table RIVETS, SPRING, LOCK PLUG CP, DUST SHUTTER: 300 stainless steel SLIDE, LOCK CORE and : Die-cast zinc, chromate dip STOP WSHER and LOCK CM: Steel, zinc plate, plus bright chromate dip LOCK HOUSING: Die-cast zinc, bright chrome plate or black powder coat Product Strength Guidelines (To assist in your product selection; samples are available for your evaluation.) 118 (4.65) 95.2 (3.75) Maximum working load: 555 N (125 lbs.) verage ultimate load: 2317 N (521 lbs.) 96.8 (3.81) 4X R5 (.20) 86 (3.38) 4X Ø H RIVET ONLY 20.9 (.82) 16 ± 0.1 (.63 ±.04) 22 (.87) 14 (.55) Refer to our Southco 2003 Handbook or visit for expanded product listings. 51

2 Southco 64 Push-to-Close Latch, Locking, 2 Point ctuator Push-to-Close Latches 2 Point Latching with easy paddle handle opening Single hole, snap-in installation Integrated Lock Corrosion-resistant materials vailable 108 (4.25) (5.50) 29 (1.14) LTCHED 25 (1.0) UNLTCHED 47 (1.85) UNLTCHED 70 (2.75) LTCHED 1.2 (.05) 4X Ø H RIVET LTCHES ONLY Ø 2.3 (.09) Ø 6 (.25) 3 (.13) 23 (.91) 42 (1.65) 12 (.45) CUP, PDDLE, RCKET: Low carbon steel or stainless steel, see part number table. RIVET, SPRING, LOCK PLUG CP, DUST SHUTTER: 300 stainless steel LOCK HOUSING, LOCK CORE and NUT: Tamac. SLIDE, STOP WSHER, CTUTOR RMS, STUDS and LOCK CM: Steel, zinc plate. NON-LOCKING LOCKING* TYPE XX XX WELD XX XX RIVET 4.9 (.19) XX XX RIVET 5.2 (.20) * 2 flat keys on a ring supplied, locks are keyed alike to CH751. ØH XX designates Paddle and Cup Material & Finish in Part Number Table as follows: -10 = Steel, zinc plated -20 = Stainless steel -30 = Steel, preplated -50 = Steel, black 118 (4.65) 95.2 (3.75) 96.8 (3.81) 86 (3.38) 4X R5 (.20) 4X Ø H RIVET ONLY 52 Refer to our Southco 2003 Handbook or visit for expanded product listings.

3 Southco 64 Push-to-Close Latch, Locking, Heavy Duty Pivot Integrated Lock Push-to-Close Latches 5.3 OPTIONL LOCK KEY CODE 8X ØH RIVET LTCHES ONLY RCKET, RIVET, SPRING, DUST SHUTTER: 300 stainless steel SLIDE, LOCK HOUSING, LOCK CORE and : Die-cast zinc CUP, PDDLE, STOP WSHER and LOCK CM: Steel NON-LOCKING LOCKING* TYPE XX XX WELD XX XX RIVET XX XX RIVET 5.2 * 2 flat keys on a ring supplied, locks are keyed alike to ØH XX designates Paddle and Cup Material & Finish in Part Number Table as follows: -10 = Steel, zinc plated -20 = Stainless steel -30 = Steel, preplated -50 = Steel, black -52 = Stainless steel, black X R5 89 THICKNESS KEEPER ll dimensions on this page are in s. Refer to our Southco 2003 Handbook or visit for expanded product listings. 53

4 Southco 64 Multi-Point Latch TRVEL END OLT OLT SSEMLY W x.320 L (4 HOLES PER RCKET) The 64 is a two-point push-to-close latch in engineered plastic with the utility and appearance of more expensive metal latches. Multi-Point Latch Systems enefits Two-point latch Push-to-Close locked or unlocked Low profile, flush mounted Easy-to-install latch assembly with mounting bracket and fastener supplied C LTCH SSEMLY Options With or without lock Rod length and configuration (Dimensions,, and C at right) to be specified by customer 3.88 OPTIONL LOCK SSEMLY Materials and Finish Housing and Lever: lack Nylon Mounting racket: CRES, zinc plated olt Springs: Stainless steel, passivated olt racket: CRES, zinc plated olt: lack nylon Note: Consult customer service for detailed ordering information on options. RODS NOT SUPPLIED OLT RCKET END OLT.15 TO.25 PNEL THICKNESS RCKET Note: Dimensions,, and C to be specified by customer. Consult customer service for detailed ordering information. 64 Series Part Numbers Part Number Locking ctuator* Non-Locking ctuator End olt *2 keys supplied. ll dimensions on this page are in inches. 86 Refer to our Southco 2003 Handbook or visit for expanded product listings.

5 Southco Push to Close Latches Paddle Latch Series, Miniature Size Plastic slide Pull paddle to open Latch is flush with outer panel Single-hole installation 28 (1.10) 0.9 (.036) 8 (.32) 43 (1.69) 1. Prepare opening in door. 2. Seat latch assembly in opening; apply mounting bracket and screw. 11 (.42) 13 (.53) 3.2±0.2 (.125±.010) Total Grip 1.6 (.065) MX. Panel Thickness Southco recommends hand torquing of mounting screw to a value less than or equal to 8 in-lb, or latch performance may be adversely affected. CUP and PDDLE: 304 Stainless steel, passivated and brushed finish. SLIDE and LEVER: Glass reinforced nylon UL 94 V-0 rated, black. SPRING and SCREW: 302 Stainless steel, passivated. TPPED RIVET: 303 Stainless steel, natural. SEMI-TUULR RIVET: 430 Stainless steel, passivated. LOCKWSHER: 410 Stainless steel, passivated. RCKET: 304 Stainless steel, passivated. Product Strength Guidelines (To assist in your product selection; samples are available for your evaluation.) Maximum static load: 90 N (20 lbs.) verage ultimate load: 125 N (28 lbs.) Push to Close Latches (.96 ±.01) R 1.5 (.06) MX. 9 (.36) Flammability Rating: UL 94: V-0 Operating Temperature Range: -18 C (0 F) to 100 C (210 F) ±0.8 (1.53 ±.01) (.38±.03) M4 slotted hex head screw/lockwasher ass'y(supplied). Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility. 127

6 Push to Close Latches Southco Push to Close Latches Paddle Latch Series, Small Size Plastic Slide Pull paddle to open ccommodates many grips and thick panels Latch is flush with outer panel Single-hole installation 25 (.97) 1 (.04) 13 (.50) 47 (1.84) 42.5 (1.67) THICKNESS RNGE (see table) 56 (2.20) CUP PDDLE 14 (.56) GRIP RNGE (see table) CUP, COVER, and PDDLE: 304 Stainless steel, passivated plus satin brushed finish or plus black (see table). SLIDE: Glass reinforced nylon, natural. RCKET: 302 Stainless steel, passivated. PIN and SPRINGS: 302 Stainless steel, passivated. STUD: 304 Stainless steel, passivated. NUT: 304 Stainless steel, passivated with nylon insert. COVER RCKET STUD, M4 Thread SLIDE Style 1 shown Style 2 GRIP RNGE S Door Thickness Range 3.7 MIN. MX. MX. 3.9 (.154) to 11.1 (.437) to (.144) 7.3 (.288) 14.6 (.576) rushed Finish 1.2 (.05) 2 (.08) (.11) 3.6 (.14) (.23) 6.7 (.27) (.48) 13.1 (.52) (.73) 19.4 (.77) (.734) to 22 (.868) Pawl Style T MIN. MX. 1.6 (.063) 10.4 (.41) 12.7 (.50) 12.4 (.49) 3.2 (.125) 6.4 (.250) 11.9 (.47) 14.2 (.56) 14.2 (.56) 7.1 (.281) 7.1 (.281) Latch, mounting bracket and nut are shipped separately, bulk. For an assembly with a lack Powder Coated Cup, Paddle and Cover; change the last digit of the part number to "5". Ex Prepare door. Door thickness must not exceed T dimension (see table) in area through which slide will operate. It may be necessary to reduce thickness of door in area indicated by grid. 2. Insert latch in door and tighten mounting nut onto the bracket ± 0.2 (1.88 ±.01) STYLE Style 3 Style 4 Style 5 STRENGTH GUIDELINES MX. static verage ultimate load N (lbs.) load N (lbs.) 130 (30) 330 (75) 110 (25) 90 (20) 70 (15) 55 (12) 160 (35) 140 (30) 120 (25) 90 (20) 36.5 ± 0.2 (1.44 ±.01) R 2 (.09) MX. 16 (.63) MIN ± 0.2 (.41 ±.01) STUD RCKET Flammability Rating: UL 94 - V-0 Operating Temperature Range: -18 C (0 F) to 100 C (210 F) 128 Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility.

7 Southco Push to Close Latches Paddle Latch Series, Small Size Metal slide Pull paddle to open Three grip ranges Latch is flush with outer panel Single-hole installation 47 (1.84) 42.5 (1.67) 1 (.04) 56 (2.20) CUP PDDLE 14 (.56) GRIP RNGE (see table) CUP, PDDLE, and COVER: 304 Stainless steel, passivated plus satin brushed finish or plus black (see table). SLIDE: 1010 Steel, chrome plated. RCKET: 302 Stainless steel, passivated PIN and SPRINGS: 302 Stainless steel, passivated. STUD: 304 Stainless steel, passivated NUT: 304 Stainless steel, passivated with nylon insert Push to Close Latches 13 (.50) 25 (.97) COVER RCKET STUD, M4 Thread SLIDE MIN. 1.2 (.05) 2 (.08) 2.8 (.11) GRIP RNGE MX. 2.0 (.08) 2.8 (.11) 3.6 (.14) S MIN (.41) 11.2 (.44) 11.9 (.47) MX ( (.53) 14.2 (.56) 11.5 (.45) 11.9 (.47) 12 (.48) Latch, mounting bracket and nut are shipped separately, bulk. For an assembly with a lack Powder Coated Cup, Paddle and Cover; change the last digit of the part number to "2". Ex Prepare door. Insert latch in door and tighten mounting nut onto the bracket. 47.5± 0.2 (1.88 ±.01) Product Strength Guidelines (To assist in your product selection; samples are available for your evaluation.) Maximum static load: 222 N (50 lbs.) verage ultimate load: 578 N (130 lbs.) 36.5±0.2 (1.44 ±.01) R 2 (.09) MX. STUD PNEL RCKET Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility. 129

8 Push to Close Latches Southco Push to Close Latches Paddle Latch Series, Medium and Large Sizes Metal slide Pull paddle to open Locking and non-locking versions Latch is flush with outer panel Single-hole installation Series 20 vailable with or without lock (see part number table). 19 (.75) 68.5 (2.69) 20 Series FINISH Without Lock Stainless steel rushed Steel Zinc plated Powder Coat lack Silver Series With Lock* (.25) MX. Door Thickness LTCH 84 (3.31) 8 (.31) 1.2 (.05) *Locks are keyed alike. Different key codes are available. Contact Southco for details (.69) 7.9 (.31) 36 (1.39) RCKET DJUSTING NUT LOCKWSHER M5 Thread GP IMPORTNT (See installation) LTCH SSEMLY T MX. E W R MX. GP IMPORTNT see instruction No. 3 SLIDE DJUSTING NUT RCKET D MIN. C Edge of frame or modified latching surface (notch, hole, bracket or shim). See instruction No. 2. L LOCKWSHER SERIES L W R (2.81 ±.01) (2.19 ±.01) 2.5 (.09) (4.25 ±.01) (3.25 ±.01) 3 (.13) MIN. MX. 8 (.31) 11 (.44) 11 (.44) 15.9 (.63) C D MIN. E REF. T MX. 7.9 (.31) 11.1 (.44) 14.3 (.56) 11.9 (.47) 14.3 (.56) 20.6 (.81) 6.4 (.25) 9.5 (.38) 130 Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility.

9 Series (1.01) 49 (1.94) 127 (5) MXIMUM THICKNESS = 9.5 (.375) RCKET DJUSTING NUT LOCKWSHER 4.5 (.17) vailable with or without lock (see part number table). 1/4-20 THRED LTCH SSEMLY GP IMPORTNT (See installation) 11 (.44) (4) 28.5 (1.13) 1. Prepare door. 2. If frame requires modification (notch, hole or shim), be sure to observe C and D dimensions and to allow sufficient width clearance for latching slide. See latch drawings for width of slide. 3. Measure your door thickness and set adjusting nut so that GP is equal to door thickness within plus 0.8 (.03), minus 0.0 (.00). 4. ssemble latch in door and tighten mounting nut. 1.6 (.06) 11.9 (.47) 300 SERIES FINISH without lock with lock* Stainless steel rushed Steel Zinc plated lack powder coat * Locks are keyed alike. Different key codes are available. Contact Southco for details. CUP and PDDLE: 1010 Steel, zinc plated plus bright chromate dip or powder coated (black or satin silver) or 304 stainless steel, passivated and brushed finish (see table). GUIDE and SLIDE: 1010 Steel, zinc plated plus bright chromate dip or 304 stainless steel, passivated. SPRING: 302 Stainless steel, passivated. LOCKWSHER: Spring steel, zinc alloy plate, bright chromate plus sealer or 304 stainless steel, passivated. For 20 Series PIN: 302 Stainless steel, passivated. NUT: Steel, zinc plate, chromate plus sealer or stainless steel, passivated. RCKET: 1010 Steel, zinc plate, chromate plus sealer or 304 stainless steel, passivated. STUD: 1021 Steel, zinc alloy plate, bright chromate plus sealer or 302 stainless steel, passivated. For 300 Series RIVET: 430 Stainless steel, passivated. NUT: Steel, zinc plate, chromate plus sealer or 18-8 stainless steel, passivated. RCKET: 1010 Steel, zinc plate, chromate plus sealer or 304 stainless steel, passivated. STUD: 1021 Steel, zinc plate, chromate plus sealer or 18-9L10 stainless steel. For Locking Versions LOCK: Die-cast zinc, black powder coated or chrome plated. LOCK RM: Steel, zinc alloy plate, bright chromate plus sealer or stainless steel, passivated. : Die-cast zinc with chemical protective film. SCREWS: Steel, zinc plated plus chromate dip or stainless steel, passivated. KEYS (2): rass, nickel plated. Push to Close Latches Product Strength Guidelines (To assist in your product selection; samples are available for your evaluation.) Series 20 Maximum static load: 570 N (125 lbs.) Series 300 Maximum static load: 1110 N (250 lbs.) Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility. 131