Aluminum Extendable Trolley

Transcription

1 L_060_13_Anl-Alu-Rollw-.pdf :32 Aluminum Extendable Trolley User manual English Type: ARW-150

2 L_060_13_Anl-Alu-Rollw-.pdf :32 ALUMINUM EXTENDABLE TROLLEY OUR MESSAGE Please read this manual carefully and keep it for reference. If you hand over the cart to somebody else, please also pass on this manual. INTENDED USE The cart is to be exclusively used for transporting loads up to a maximum of 150kg total weight. It is not suitable for transporting people or unsecured loads. It is not intended for commercial use. PRODUCT INCLUDES Preassembled unit (with folded handles), 2 wheels with lockable castor and 2 swivel castors (Wheel diameter: with mountings, 2 trestle rollers with mountings, Locking wheels TECHNICAL INFORMATION Type: ARW-150 Weight: ca lbs (8.2kg) Additional load: lbs (150kg) max. Folded size: 19.7Lx16.1Wx8.5H inches 50Lx41Wx21.5H cm Handle height (unfolded): 37.4 inches (95cm) Handle height (folded): 27.6 inches (70cm) Usable loading area (folded): 16.5Lx16.1W inches (42Lx41W cm) Usable loading area (unfolded): 24.8Lx16.1W inches (63Lx41W cm) Swivel castors (one lockable): Trestle rollers: GENERAL SAFETY INSTRUCTIONS Packaging is not a toy. Always stack your cart in such a way that you are able to grip the upper handle with your hands. For safety reasons, do not exceed the maximum load of lbs (150kg). Be sure to load the cart evenly for safe operation especially at the sides. Keep the centre of gravity of the load as low as possible by placing heavier items underneath lighter ones. Please be sure that the load can't slip or fall when being transported. For this purpose straps are recommended for securing loads. Please be careful that nobody is standing in the way when negotiating steps or steep declines. Do not use the cart for transporting people. Do not use the cart if damaged

3 L_060_13_Anl-Alu-Rollw-.pdf :32 1. COMMISSIONING - WHEEL ASSEMBLY The four roller castors must be added before usage. The self-locking nuts (locknuts) prevent the screw fixtures from loosening during "bumpy" transportation. It is, therefore, recommended to check that they are secure from time to time and to make any necessary adjustments. 3. RAISING THE FRAME HANDLE The handle area is covered with foam material. A frame made of offset sections locks and unlocks the handle in the vertical as well as the unfolded position. By pressing down on the frame (see figure and ) you can raise or lower the frame until it locks into place. 2. UNFOLDING THE FRAME HANDLE In order to release the handle into the horizontal position, the cart frame should be pushed downwards. Two retaining springs bring the frame into a resting position once again. When in a vertical position and when unfolded the handle element and handle snaps audibly into place. 4. UNFOLDING THE LOADING AREA The loading area consists of two encapsulated frame sections which are inserted into each other at intervals of every fifth length section. The specially designed cross-section permits heavy loads to be carried even when folded. When folded the loading area is just 16.5Lx16.1W inches/ 42Lx41W cm. When unfolded, however, it increases by 50% to 24.8Lx 16.1W inches/ 63Lx41W cm. A movable clamp prevents it from unintentionally pulling apart in the folded position

4 L_060_13_Anl-Alu-Rollw-.pdf :32 IMPORTANT INSTRUCTIONS In order to guarantee a long and fault free lifespan of the cart, it's important to follow the instructions below. After assembling the rollers, please check that every screw joint is secure. Should it ever be necessary to loosen one or more of the screw joints, the locknuts must be replaced. Since the inserting sections are covered in a slight oil film upon delivery, cleaning with solvents is to be avoided but instead the oil film should be renewed from time to time. For such a purpose a lint-free cloth should be used with a little machine oil and rubbed over the inner section. WASTE DISPOSAL Make your contribution to environmental protection. Dispose of packaging and end-of-life equipment in line with legal regulations. Please contact your local community office for details

5 L_060_13_Anl-Alu-Rollw-.pdf :32 ALUMINUM EXTENDABLE TROLLEY Aluminum Extendable Trolley User manual English... 2 OUR MESSAGE Please read this manual carefully and keep it for reference. If you hand over the cart to somebody else, please also pass on this manual. INTENDED USE The cart is to be exclusively used for transporting loads up to a maximum of 150kg total weight. It is not suitable for transporting people or unsecured loads. It is not intended for commercial use. PRODUCT INCLUDES Preassembled unit (with folded handles), 2 wheels with lockable castor and 2 swivel castors (Wheel diameter: with mountings, 2 trestle rollers with mountings, Locking wheels TECHNICAL INFORMATION Type: ARW-150 Weight: ca lbs (8.2kg) Additional load: lbs (150kg) max. Folded size: 19.7Lx16.1Wx8.5H inches 50Lx41Wx21.5H cm Handle height (unfolded): 37.4 inches (95cm) Handle height (folded): 27.6 inches (70cm) Usable loading area (folded): 16.5Lx16.1W inches (42Lx41W cm) Usable loading area (unfolded): 24.8Lx16.1W inches (63Lx41W cm) Swivel castors (one lockable): Trestle rollers: GENERAL SAFETY INSTRUCTIONS Packaging is not a toy. Always stack your cart in such a way that you are able to grip the upper handle with your hands. For safety reasons, do not exceed the maximum load of lbs (150kg). Be sure to load the cart evenly for safe operation especially at the sides. Keep the centre of gravity of the load as low as possible by placing heavier items underneath lighter ones. Please be sure that the load can't slip or fall when being transported. For this purpose straps are recommended for securing loads. Please be careful that nobody is standing in the way when negotiating steps or steep declines. Do not use the cart for transporting people. Do not use the cart if damaged. 1. COMMISSIONING - WHEEL ASSEMBLY The four roller castors must be added before usage. The self-locking nuts (locknuts) prevent the screw fixtures from loosening during "bumpy" transportation. It is, therefore, recommended to check that they are secure from time to time and to make any necessary adjustments. 2. UNFOLDING THE FRAME HANDLE In order to release the handle into the horizontal position, the cart frame should be pushed downwards. Two retaining springs bring the frame into a resting position once again. When in a vertical position and when unfolded the handle element and handle snaps audibly into place. 3. RAISING THE FRAME HANDLE The handle area is covered with foam material. A frame made of offset sections locks and unlocks the handle in the vertical as well as the unfolded position. By pressing down on the frame (see figure and ) you can raise or lower the frame until it locks into place. 4. UNFOLDING THE LOADING AREA The loading area consists of two encapsulated frame sections which are inserted into each other at intervals of every fifth length section. The specially designed cross-section permits heavy loads to be carried even when folded. When folded the loading area is just 16.5Lx16.1W inches/ 42Lx41W cm. When unfolded, however, it increases by 50% to 24.8Lx 16.1W inches/ 63Lx41W cm. A movable clamp prevents it from unintentionally pulling apart in the folded position. IMPORTANT INSTRUCTIONS In order to guarantee a long and fault free lifespan of the cart, it's important to follow the instructions below. After assembling the rollers, please check that every screw joint is secure. Should it ever be necessary to loosen one or more of the screw joints, the locknuts must be replaced. Since the inserting sections are covered in a slight oil film upon delivery, cleaning with solvents is to be avoided but instead the oil film should be renewed from time to time. For such a purpose a lint-free cloth should be used with a little machine oil and rubbed over the inner section. WASTE DISPOSAL Make your contribution to environmental protection. Dispose of packaging and end-of-life equipment in line with legal regulations. Please contact your local community office for details Type: ARW Job-Name / Jobname (Land): Alu Rollwagen () Job-No. / Jobnummer: OVI_060_13 Name of Artwork / Dateiname: L_060_13_Anl-Alu-Rollw-.ai Size of Artwork / Format: 140 x 216 mm (Half Letter) Ink-Colors / Farben: (CMYK) Pages/ Seiten: 4 Miscellaneous / Sonstiges: Cutline (do not print) / Stanze Date / Datum (Korrektur-Version): (7. Korrektur)