Manual Awning. Assembly Instructions. Product No Toll-free:

Transcription

1 Manual Awning Product No Instructions Toll-free: IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference.

2 3 Table of Contents 3 Important Safety Instructions 3 Packaging Contents 4 Key Parts Diagram 4-9 Cleaning and Maintenance 0 Technical Data 0 Warranty Table of Contents Warning! To reduce the risk of serious injury, read the following safety instructions before assembling and using the awning. Always keep children under close supervision while they are playing around this product. Never leave children unattended. Keep pets away while setting up the awning. Check municipal by-laws prior to setting up the awning. It is recommended to install the product on concrete walls. If it is necessary to install the product on a brick wall, install the expanding bolts directly in the bricks without using the mortar. Other types of surfaces, e.g. wood or plasterboard, are not strong enough to support this product. This product is not stable enough to be installed on these surfaces, especially in windy, rainy, or snowy conditions. Never use the product in extreme weather conditions. This could cause damage to property and/or injury to the user. Before installation, make sure there is enough space to extend the awning without any obstructions. At least 3 adults are needed for the installation. Install this product at a minimum height of. m (8') above the ground. When working at a larger height, always use a suitable ladder. Keep the product s fabric away from fire sources and flammable objects. Do not place any heavy objects on top of the fabric while the awning is extended. Check the product regularly to make sure all bolts and nuts are securely tightened. If any loose joints are found, tighten them immediately. Do not use the awning while cleaning it or when performing maintenance on surrounding windows or doors. Never use replacement parts and hardware which are not recommended by the manufacturer. They could pose a safety risk to the user and might cause damage to the product. Only use original parts and hardware. Retain the original packaging to store the product. Please store the product in a dry and clean area. Use a clean cloth to remove any manufacturing residues from the product before first use. Use a damp cloth for cleaning the product on a regular basis. Important Safety Instructions Imported for Trileaf Distribution Trifeuil Toronto, Canada M4S B8 IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.

3 4 Product No Packaging Contents C Crank wand - Spring washer - 4 D Wall bracket - Nut E Awning frame - Lead sleeve - 4 A F Expansion bolt - 4 Fastening bolt set - B G Flat washer - 4 Drill bit - Proper placement of your awning is essential. Do not place the product underneath electrical lines. Keep children away during assembly. This product contains small parts which can be swallowed by children. While assembling the awning, avoid placing fingers in any areas where they can be pinched or trapped. Do not attempt to assemble the awning if any part is missing. Let us help you! DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US FIRST! If you have questions regarding your product, require warranty assistance, or have damaged or missing parts, please call our customer service toll-free helpline. Contact us for assistance; we re here to help. 3 Parts list IMPORTANT: Please read and understand this manual before any assembly. Before beginning assembly of product, make sure all parts are present. Compare parts with packaging contents list. If any part is missing, or if you have any questions, contact the service centre at (toll-free). Key Parts Diagram Crank wand Wall bracket Awning frame Left arm Supporting bar Fabric Right arm Valance Take all parts from the packaging box and position them on a clean floor. Remove all packing materials and place them back into the box. Do not dispose of the packing materials until assembly is complete. Read each step carefully before beginning any assembly and make sure you understand each step. If any part is missing, please call our toll-free number for assistance: Needed for assembly: 3 People Tape measure Ladder 8 9 Front bar 0 0 Level 3 Easy angle system Jack bolt 3 Locking nut Pencil Drill 3

4 6 Product No Step Choose an appropriate place on the wall at least. m (8') above the ground. Mark the chosen height on both sides with a pencil and draw a horizontal line connecting the points. Before drilling, ensure there are no electrical wires or water pipes behind the drill spots. It is recommended to wear protective goggles and hearing protection while drilling the holes.. m (8') Step 3 Requires A, E, G Drill two holes on the marked locations using the drill bit (included) (G). Make sure the holes are deeper than the length of the lead sleeves (E). Insert the expanding bolts (A) into the lead sleeves (E). Insert the expanding bolts with the lead sleeves inside the drilled holes, using a hammer if necessary. While inserting the bolt, make sure the bolt head faces the drilled hole. A E G Step Choose two locations on the horizontal line on the wall where the wall brackets need to be fixed. Mark the locations corresponding to each bracket. G A E. m (8') Step 4 Requires B, C, D Align the holes of the wall brackets with the threads of the expanding bolts. Mount the wall brackets onto the expanding bolts. Secure the wall brackets in place using the flat washers (B), spring washers (C) and nuts (D). B C D Install the wall brackets with hinges facing out. If not, the awning cannot be retracted fully. D B C

5 8 Product No Step Requires, With the help of some persons, lift the awning and place the supporting bar () within the protrusions of the wall brackets (). Step 7 Requires Insert the crank wand () into the crank loop. The awning is installed and ready for use. Note: If the supporting bar cannot be easily fitted to the wall brackets, slightly lift the front side of the awning. Step 6 Requires, F Secure the supporting bar on the wall brackets () by inserting two fastening bolts (F) onto the corresponding holes on the wall brackets. Step 8 Requires Turn the crank wand () clockwise to extend the fabric and anti-clockwise to retract the fabric. F F Note: It is recommended to remove the crank wand from the crank loop and to store it in a safe place when not in use. Stop retracting the awning if the fabric is under tension. Excessive retraction can tear the fabric.

6 0 Product No Technical Data Cleaning and Maintenance Cleaning the awning frame Use a mild detergent and warm water to clean the frame. Do not use abrasive cleansers, chemicals, bleach, or solvents. Rinse with clean water. Dry thoroughly. Cleaning the fabric It is sufficient to just brush off the dirt on the fabric in most cases. If necessary, wipe the dirt off the fabric using a damp cloth soaked with mild soap. Dry the fabric in the extended position as soon as possible. Maintenance To maintain the best look of awning frame, apply some quality car wax after cleaning. It is recommended to retract the awning when not in use for an extended period of time. Dimensions (L x W) Product weight Always clean and dry your awning completely before retracting it after every use. Before assembling, adjusting or cleaning the right and left arms, strap both arms, or extend the awning fully until the internal springs are completely free of tension..4 x. m 8 x '.8 kg (net), 8. kg (gross) 34 lb 3 oz (net), 40 lb oz (gross) Warranty This For Living product carries a one () year warranty against defects in workmanship and materials. Trileaf Distribution agrees to replace the defective product free of charge within the stated warranty period, when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse. Warranty