BREADBOARD COMPONENTS
|
|
- Allison Lewis
- 6 years ago
- Views:
Transcription
1 BREABOAR COMPONENTS IALS ial Clamp rum ials Flat ials Engraved Flat isks Flat ial Index Engraved Index KNURLE HANWHEELS KNURLE HAN CRANKS HAN CRANKS KNOBS SYNCRO MOUNT CLAMPS MINIATURE SYNCRO MOUNT CLAMPS Table of Contents For metric options, please see our metric catalog BERG
2 IAL CLAMP STAINLESS STEEL X A16-1 1/16 A16-2 1/8 Supplied complete with all hardware BERG 2
3 RUM IALS IAMETER TYPE 1-1/2" TO 3" SETS, IALS OR VERNIERS ALUMINUM BLACK ANOIZE SET IAL VERNIER IAL IA. T WITH VERNIER REAING GRAUATIONS A1-1* A1-1- A1-1-V /8 12 MIN. 180 IN 2 STEPS A1-2* A1-2- A1-2-V /8 12 MIN. 180 IN 2 STEPS A1-3 A1-3- A1-3-V /2 6 MIN. 360 IN 1 STEPS A1-4 A1-4- A1-4-V /2 6 MIN. 360 IN 1 STEPS * ials and Verniers are numbered every 20. Engraving filled with white. Range of Graduations - 0 to 360 Available on request: Pin or Clamp Hubs assembled to drum Counter Clockwise numbering Special Engraving For Pin and Clamp Hubs see index BERG
4 RUM IALS IAMETER 1" TO 3" ALUMINUM BLACK ANOIZE W WITH IAL IA. IRECTION OF NUMBERING GRAUATIONS RANGE OF GRA.S STEPS IN EGREES A3-1 BLANK A3-2* 1 3/8 CW 0 TO A3-3 (.990) CW 0 TO A4-1 BLANK A4-2* 1-1/2 CW 0 TO A4-3 3/8 (1.490) CW 0 TO A4-4 CW 0 TO A5-1 BLANK A5-2* 2 CW 0 TO A5-3 3/8 (1.990) CW 0 TO A5-4 CW 0 TO A6-1 BLANK A /2 CW 0 TO A6-3 1/2 (2.490) CW 0 TO A6-4 CCW 0 TO A7-1 BLANK A7-2 CW 0 TO A7-3* 3 1/2 CW 0 TO A7-4 (2.990) CW 0 TO A7-5 CCW 0 TO * ials are numbered every 20. Engraving filled with white. Range of Graduations - 0 to 360 Available on request: Pin or Clamp Hubs assembled to drum Special Engraving For Pin and Clamp Hubs see index BERG 4
5 FLAT IALS IAMETER TYPE 1-1/2" TO 4" SETS, IALS OR VERNIERS ALUMINUM BLACK ANOIZE SET IAL VERNIER A IAL IA. VERNIER REAING GRAUATIONS A2-1* A2-1- A2-1-V /2 12 MIN. 180 IN 2 STEPS A2-2* A2-2- A2-2-V MIN. 180 IN 2 STEPS A2-3 A2-3- A2-3-V MIN. 360 IN 1 STEPS A2-4 A2-4- A2-4-V MIN. 360 IN 1 STEPS * ials and Verniers are numbered every 20. Engraving filled with white. Range of Graduations - 0 to 360 Available on request: Pin or Clamp Hubs assembled to drum Read at 12 o clock Counter Clockwise numbering Special Engraving For Pin and Clamp Hubs see index BERG
6 ENGRAVE FLAT ISKS IAMETER 1-1/2" TO 4" ALUMINUM BLACK ANOIZE IAL IA. IRECTION OF NUMBERING GRAUATIONS RANGE OF GRA.S STEPS IN EGREES A8-1 BLANK A8-2* CW 0 TO A /2 CW 0 TO A8-4 CW 0 TO A8-5 CW 0 TO A9-1 BLANK A9-2* CW 0 TO A9-3* CCW 0 TO A9-4 2 CW 0 TO A9-5 CCW 0 TO A9-6 CW 0 TO A9-7 CW 0 TO A9-8 CW 0 TO A10-1 BLANK A10-2 CW 0 TO A10-3* CW 0 TO A10-4 CW 0 TO A CW 0 TO A10-6 CW 0 TO A10-7 CW 0 TO A10-8 CCW 0 TO A10-9 CCW 0 TO A11-1 BLANK A11-2 CW 0 TO A11-3* CW 0 TO A11-4 CW 0 TO A CW 0 TO A11-6 CW 0 TO A11-7 CCW 0 TO A11-8* CCW 0 TO * ials are numbered every 20. Engraving filled with white. Range of Graduations - 0 to 360 Available on request: Pin or Clamp Hubs assembled to drum Special Engraving For Pin and Clamp Hubs see index BERG 6
7 FLAT IAL INEX ALUMINUM BLACK ANOIZE X R A /4.750 A A / A RUM IAL INEX ALUMINUM BLACK ANOIZE X R A A A A BERG
8 ENGRAVE INEX PLEXIGLASS & FINISH A12-1 PLEXIGLASS (CLEAR) MIL-P-5425 ALUMINUM BLACK ANOIZE & FINISH A ST. ALUMINUM, BLACK ANOIZE BERG 8
9 KNURLE HANWHEELS 303 STAINLESS STEEL ØA Ø ØH T L C CN1-1 1 CN /2 CN1-3 (1/8) 2 CN1-4 1 CN /2 CN1-6 (3/16) 2 CN1-7 1 CN /2 (1/4) CN1-9 2 CN CN /2 CN1-12 (5/16) 2 CN CN /2 CN1-15 (3/8) 3 CN /2 CN CN1-18 (1/2) 4 5/16 3/ /8 3/ /2 3/ /2 3/ /4 3/ / BERG
10 KNURLE HANWHEELS ALUMINUM BLACK ANOIZE CN /8 CN11-2 (1/8) 1-5/8 CN /8 CN11-4 (3/16) 2-1/8 CN /8 CN11-6 (1/4) 2-1/8 CN /8 CN11-8 (3/8) 2-5/8 CN /8 CN11-10 (1/2) 3-1/2 ØA Ø ØH T L C 5/8 3/16 7/16 1/8 5/8 3/16 7/16 1/8 5/8 3/16 7/16 1/8 1 1/2 3/4 1/8 1 1/2 3/4 1/ BERG 10
11 KNURLE HAN CRANKS 303 STAINLESS STEEL CN CN2-2 (1/8) 1-1/2 CN2-3 2 CN CN2-5 (3/16) 1-1/2 CN2-6 2 CN CN2-8 (1/4) 1-1/2 CN2-9 2 CN CN2-11 (5/16) 1-1/2 CN CN CN2-14 (3/8) 2-1/2 CN CN /2 CN2-17 (1/2) 3 CN ØA Ø ØH T L C B 5/16 3/ /4 3/8 3/ /4 1/2 3/ /4 1/2 3/ /4 3/4 3/ /32 1 3/ / BERG
12 HAN CRANKS ALUMINUM BLACK ANOIZE CN /8 CN12-2 (1/8) 1-5/8 CN /8 CN12-4 (3/16) 2-1/8 CN /8 CN12-6 (1/4) 2-1/8 CN /8 CN12-8 (3/8) 2-5/8 CN /8 CN12-10 (1/2) 3-1/2 ØA Ø ØH T L B C 5/8 3/16 7/16 3/4 1/8 5/8 3/16 7/16 3/4 1/8 5/8 3/16 7/16 3/4 1/8 1 1/2 3/4 3/4 31/32 1/8 1 1/2 3/4 31/32 1/ BERG 12
13 KNOBS TYPE SPINNER KNOB AN SCREW ALUMINUM BLACK ANOIZE WITH 303 STAINLESS STEEL SCREW A B THREA E F G CN8-1 1/2 3/4 #8-32 3/16 1/64 3/16 5/16 CN8-2 11/16 31/32 1/4-20 7/16 1/64 5/16 1/2 CN8-3 15/16 1-1/4 3/8-16 5/8 11/32 1/2 3/4 TYPE SPINNER KNOB WITH RIBBE GRIPPING SURFACE THERMOPLASTIC BLACK MATTE FINISH WITH ALUMINUM INSERTS Meets MIL-K-3926 B and MS91528J MS PART 91528J NUT CLEARANCE B MIN. C MIN. F MAX. SHAFT HOLE EPTH E MIN. A H MAX. L J K SET SCREW CN S2B #8-32 CN S2B #8-32 TYPE ROUN KNOB ALUMINUM BLACK ANOIZE WITH 303 STAINLESS STEEL SCREW Meets MIL-K-3926 B and MS91528J MS PART 91528J A NUT CLEARANCE B MIN. C MIN. F MAX. E MIN. L H MAX SET SCREW CN B #4-40 CN B #4-40 CN B #8-32 CN B # BERG
14 SYNCRO MOUNT CLAMPS SHAFTS 1/8" TO 1/4" 416 STAINLESS STEEL HEAT TREATE - ROCKWELL C28-32 (CAST) T C F SM SM SM SM SM SM SM SM SHAFTS 1/8" TO 1/4" 303 STAINLESS STEEL T C F SM SM SM SM SM SM SM SM SHAFTS 1/8" TO 1/4" 2024-T4 ALUMINUM T C F SM-1-A SM-2-A SM-3-A SM-4-A BERG 14
15 SYNCRO MOUNT CLAMPS MOUNT STYLES TOP AN REVERSE 316 STAINLESS STEEL (SINTERE) WITH NYLON INSERTS MOUNT STYLE H REF J E REF F SQ /4 SQ /4 SQ-3 TOP /4 SQ /16 SQ /16 G SCREW SIZE K L MAX # SQ /16 SQ /16 SQ /8 SQ /8 SQ /8 SQ /8 SQ-12 TOP /8 # SQ /8 SQ SQ /8 SQ /16 SQ /8 SQ-18 TOP /8 # SQ SQ-20 REVERSE *# SQ Quick Releasing Faster Nulling of Clamped Component Self Locking Meets ASTM B525 Clamp and ASTM B4066 Insert * 303 Stainless Steel slotted pan head screw supplied (except reverse mount). Phillips pan head screw (MIL Standard) available on request BOLT CIRCLE FOR CLEATS USE THE LARGER OF THE FOLLOWING TWO BOLT CIRCLES A. 192" TO MAX FLANGE IA., OR A.275" TO MAX GROOVE BASE IA. A.270" TO MAX FLANGE IA., OR A. 400" TO MAX GROOVE BASE IA. A.406" TO MAX FLANGE IA., OR A.630" TO MAX GROOVE BASE IA. A.270" TO MAX FLANGE IA., OR A.400" TO GROOVE BASE IA BERG
16 SYNCRO MOUNT CLAMPS SHAFTS 1/8" TO 1/4" 303 STAINLESS STEEL AN ALUMINUM 303 STAINLESS STEEL ALUMINUM SM-20 SM-20-A SM-21 SM-21-A SM-22 SM-22-A H T SHAFTS 1/8" TO 1/4" 302 STAINLESS STEEL AN ALUMINUM 302 STAINLESS STEEL ALUMINUM SM-23 SM-23-A.040 T SHAFTS 1/8" TO 1/4" 303 STAINLESS STEEL AN ALUMINUM 303 STAINLESS STEEL ALUMINUM SM-24 SM-24-A SM-25 SM-25-A SM-26 SM-26-A SM-27 SM-27-A H T SHAFTS 1/8" TO 1/4" 302 STAINLESS STEEL 302 STAINLESS STEEL H. SM-28 FLAT SM SM SM SM BERG 16
17 SYNCRO MOUNT CLAMPS THREA #2-56, #4-40 AN # STAINLESS STEEL SCREW 302 STAINLESS STEEL CLAMP & LOCKWASHER THREA COMPONENT SIZE THREA A B C E F G SQ & 10 # SQ-28 11, 15 & 18 # SQ # #2-64, #4-48 AN # STAINLESS STEEL SCREW 302 STAINLESS STEEL CLAMP & LOCKWASHER COMPONENT SIZE THREA A B C E F G SQ & 10 # SQ-31 11, 15 & 18 # SQ # BERG
18 SYNCRO MOUNT CLAMPS 303 STAINLESS STEEL S SM SM SM SM STAINLESS STEEL AN ALUMINUM 303 STAINLESS STEEL ALUMINUM E B SM-43 SM-43-A SM-44 SM-44-A SM-45 SM-45-A SM-46 SM-46-A BERG 18
19 MINIATURE SYNCRO MOUNT CLAMPS 316 STAINLESS STEEL (SINTERE) WITH NYLON INSERT COMP. SIZE MOUNT STYLE SQ-21 5, 8,10 TOP SQ-22 5 TOP SQ-23 8,10 TOP Quick Releasing Self Locking H F BERG
20 BERG 20
WORKHOLDING COMPONENTS
Adjustable Clamp Heels... 274 Adjustable Clamp Rests...273 Adjustable Step Blocks...284 Assemblies, Spherical Flange...260 Bolts, Dovetail...258 Bolts, Swing... 241 Bolts, T...258 Bolts, T-Slot...257 Bolts,
More information3/8 BORE MOUNTING BRACKETS
3/8 BORE MOUNTING BRACKETS 11767 Ceramic Insulator Use with cylinder having #8-32 threaded shaft to insulate cylinder from heat or electricity #8-32 thd. - thru dia. Male Clevis 11996 Mounts in rear of
More informationHANDWHEELS.
HANDWHEELS 5 Handwheels Aluminum Angular Solid Handwheel...5.2 Aluminum Angular Spoked Handwheel... 5.2 Aluminum Finger Wheel... 5.10 Cast Angular Spoked Handwheel... 5.3 Cast Iron Angular Spoked Handwheel...
More informationHANDLES, LE VERS & CR ANKS
Handles, Levers & Cranks Plastic Pull/Lift Handle...112 Plastic Revolving Fold-Away Handle... 95 Plastic Revolving Heavy Duty Handle With Steel Shank... 92 Plastic Revolving Handle With Steel Through Shank...
More informationBEARING, SHAFTS, CLAMPS, COLLARS, HUBS & KEYS
BEARING, SHAFTS, CLAMPS, COLLARS, HUBS & KEYS HUBS Gear, Dial and Sprocket Assembies - Tech Info.... I 2 Phase Adjustable Hub...I 3 Gear, Sprocket and Dial Hubs...I 4 - I 6 Dual Gear Hubs...I 7 CLAMPS
More informationDiscount Schedule: C2. Subclass: DS0. Type 1 & 3R Double-Door Telephone Cabinet T-Handle Lock. Discount Schedule: C2.
T-Handles Illustration Sheet and Type 3R Double-Door Enclosure Padlock Handle Type 3R Padlock Handle 25350 Type 3R padlock handle Type 3R Padlock Handle is intended to be used as a replacement mechanism
More informationTOOLING COMPONENTS. tel fax Clamping Kits Step Blocks...7. Driver Studs...
Clamping Kits... 2-8 Step Blocks...7 Driver Studs... 9-13 Bolts, Screws... 14-20 Nuts, Washers... 21-29 Sex Bolts... 30-31 Clamps... 32-44 Screws... 45-49 Knobs & Levers... 49-53 Rest Pads...54 Index Plungers...
More informationstyle vision & quarter turns quarter turns section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
quarter turns vision & style quarter turns INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 3 quarter turns No. 626-PK Patent Pending
More informationSteadiCam Parts List*
SteadiCam Parts List* A. 1 Bogen 3232 Monopod Swivel Tilt Head B. 1 1/2 internal to 1/2 external brass bushing flare adapter (part 9402249 at osh.com¹) C. 2 3/8 internal to 1/2 external brass bushing flare
More information3L4. Hub is chamfered. Dimension C may be changed upon request. Engineering charges may apply to certain sizes. 1/4 M6 5/16 M8 3P1 * TK4 * 3P4 3L4
RT2 3P1 / 3P4 3L4 3-Prong Knobs 3W4 Knob Style A B C D RT2.75.50.23.51 3P1 1.25.62.50.95 TK4 / TK7 3P1C 1.25.62.26.72 TK4 1.74.58.36.86 3P4 1.75.75.49 1.05 3P4C 1.75.75.26.82 3P4Aº 1.75.75 /.57 1.25 1.82
More informationHardware Solutions Contents
Hardware Solutions Contents Front Retainers MS14108 Type Ruggedized Self-locking Front Retainers 21716 Ruggedized Self-locking Front Retainer 21953 Ruggedized Self-locking Front Retainer SLR1 Self-locking
More informationIMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS. Part # A7006
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS Part # A7006 Parts List Wobble Stopper Body Wobble Stopper Shaft Camper Bracket Lower Bracket Assembly Upper Bracket Upper Bracket Clamp 3/8 SAE Flat
More informationPole Line Hardware. Catalog
Catalog Table of Contents Anchor Rods... 3 Expanding Anchors... 3 Pole Bands... 4 Adjustable Pole Bands... 4 Connecting Links... 4 Malleable Guy Clips... 4 Shackles... 5 Crossarms... 5 Steel Braces...
More informationM129 SERVICE MANUAL- M129 MODEL #G-2 MANUAL CAN OPENER
SERVICE MANUAL- M129 MODEL #G-2 MANUAL CAN OPENER Model #G-2 Can Opener Assembly Procedure The Model #G-2 can opener will be assembled according to the following procedure. I. Model #G-2 Handle and Arbor
More informationParts Catalog. S-Series Slicer Manual S13. Model:
, 08 99506 ECN 035 Parts Catalog S-Series Slicer Manual Model: S3 S3 /3/08 Rev. M IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE FOOD
More informationSouthco 64 Push-to-Close Latch Visible, Locking, Slide Bolt
Southco 64 Push-to-Close Latch, Locking, Slide olt 139.7 (5.50) 10.2 (.40) 108 (4.25) 4X Ø H RIVET LTCHES ONLY 22.6 (.89) Push-to-Close Latches 1.2 (.05) 45.1 (1.78) NON-LOCKING LOCKING* 23.4 (.92) TYPE
More informationLift Handle. Spring Loaded Flush Lift. Locking Hasp. Swivel Hasp (Stamped) Safety Hasp (Stamped) w/fixed Plate PWB-3977S 5/16 2-3/16 3
Lift Handle Made of Stamped 316 Stainless Steel Part No. Height Width Length PWB-3977S 5/16 2-3/16 3 Spring Loaded Flush Lift Made of Stamped 316 Stainless Steel Part No Dia. High Spring PWB-3105SA 2 11/16
More informationThe safe & affordable install
QSLG1000 Quick-Sling SPECS QSLG1000 Each arm attaches to wood using 2 zip screws for stability & a 4 through bolt & wing nut for security. Installs to steel using steel beam adapters. 28 points of anti-vibration
More informationWARRENTY Void IF BROKEN 48,0 COMBINATIONS FIXED CYLINDER A A A A M = MASTER KEY SYSTEM: SUPPLIED TO ORDER ONLY
Coin Lock 264/265/268 COIN RETURN TRAY 33,2 113,5 0,0 18,0 28,8 FOR 264,265 & 269 19,0 FOR 268 26,2 16,5 13,5 34,0 6,0 WARRENTY Void IF BROKEN 48,0 32,5 15,4 18,0 Ø 6,5 9,8 3,0 Ø22,0 1,5 5,6 (RH) REMOVE
More informationInstallation & Operation Manual VHM Variable Height Series Arms with Fixed Angle Front End
3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation & Operation Manual VHM Variable Height Series Arms with Fixed Angle Front End Products covered
More informationREAD ME FIRST! IMPORTANT WARNING! ENG. Roof top tent
Roof top tent ENG TENT031 220 min READ ME FIRST! Thank you for purchasing a Front Runner Roof Top Tent. Before you start, take a moment to familiarize yourself with these Fitting Instructions and the components
More informationSERVICE MANUAL- M126
SERVICE MANUAL- MANUAL CAN OPENER- MODEL # 2 1 Model #2 Can Opener Assembly Procedure The Model #2 can opener will be assembled according to the following procedure. I. Model #2 Handle and Arbor Assembly
More information* * KR54-F, KR9854 & KR9954 Installation Instructions. Read All Warnings Before Starting Installation! Index:
*941061-00* 941061-00 Keyed Removable Mullion KR54-F, KR9854 & KR9954 Installation Instructions CLASSIFIED CLASSIFIED C Read All Warnings Before Starting Installation! Index: General Information ----------------
More informationVanagon Ladder Kit Assembly & Installation Instructions
Rocky Mountain Westy Vanagon Ladder Kit Assembly & Installation Instructions Introduction Thank you for purchasing the Rocky Mountain Westy Vanagon Ladder Kit. We pride ourselves in the products we develop
More informationSwagelok Thermoplastic Hose Hand Swager User s Manual
Swagelok Thermoplastic Hose Hand Swager User s Manual Thermoplastic Hose Hand Swager User s Manual Contents Hand Swager Components....................... 2 Setup Swager.......................................
More informationWRANGLER 1710AB, 2010AB
WRANGLER 1710AB, 2010AB WIRING DIAGRAM ITEM PART NO. DESCRIPTION QTY 1 1393251 WIRE ASSEMBLY - CIRCUIT BREAKER TO BRUSH SWITCH 1 2 1393261 WIRE ASSEMBLY - CIRCUIT BREAKER TO VACUUM SWITCH 1 3 1393271 WIRE
More informationVEPR Round Drum Disassembly and Assembly
VEPR 12 25 Round Drum Disassembly and Assembly Required Tools ¼ Allen Wrench Flat Head Screwdriver Drum Parts List Drum Body Carousel Center Bolt Dummy Rounds Carousel Lock Spring Clear Drum Cover Step
More informationFREEDOM BUTTON KIT INSTALLATION GUIDE STEP 1
FREEDOM BUTTON KIT INSTALLATION GUIDE Installation of the Freedom Button kit is very simple and similar to the installation of a standard rear takedown pin and bolt catch latch. Before installing your
More informationBEV-TENT COMPONENTS. Made in South Africa
BEV-TENT COMPONENTS REB MARKETING Distributing Agent Tel: (011) 452 9131 Cell: 072 965 6792 Fax: (011) 609 4615 15 Imvubu Road, Sebenza Ext 6, Edenvale orders@rebmarketing.co.za BEV-TENT 001 90 deg Elbow
More informationKAWNEER 1786 RIM EXIT DEVICE
FEBRUARY, 2015 1 DOOR STILE Device C L 40" 41-9/32" Cylinder C L Bottom of door RIM EXIT DEVICE LOCATION DOGGING KEY EXIT DEVICE FILLER PLATE CYLINDER & CYLINDER RING HOUSING COVER CYLINDER INSTALLATION
More informationTENDABOX BX3000. Cassette awning with folding arms BX3000. Description. Options:
TENDABOX Description One-piece U-shaped protective cover (Dimension 179 x 145 mm), as from 500 cm total width protective cover inner reinforcement (Dimension 179 x 145 mm), of extruded aluminium profile
More informationDeZURIK AM-SERIES MANUAL GEAR ACTUATOR USED ON BUTTERFLY VALVES
AM-SERIES MANUAL GEAR ACTUATOR USED ON BUTTERFLY VALVES Instruction D10501 January 2015 Instructions These instructions provide information about AM-Series Manual Actuators used on Butterfly Valves. They
More informationZPS BALL LOCK QUICK CHANGE FIX TURING. Ball Lock Mounting System (Inch) Zero Point Mounting System. Ball Lock Mounting System (Metric)
QUICK CHANGE FIXTURING M O U NTIN G SYS TEM Ball Lock Mounting System (Inch) Ball Lock for Rotary Indexers...19 Ball Lock Accessories... Ball Lock Selector Guides... 27 Commonly Asked Questions About the
More informationLOAD BINDER WINCHES AUTO TENSIONER (AIR WINCH) PART NO 30/303899
LOAD BINDER WINCHES AUTO TENSIONER (AIR WINCH) PART NO 30/303899 NORMAL OPERATION 1. Release locking pawls (2 of). 2. This allows drum to run free and strap can be pulled off drum. 3. Throw over load,
More informationBR-2250/BR Burnisher. Operator and Parts Manual. Model No.: BR BR-2250 Can. Pac BR BR-2500 Can.
BR-220/BR-200 Burnisher Model No.: 608342 BR-220 609248 BR-220 Can. Pac 608340 BR-200 609247 BR-200 Can. Pac Operator and Parts Manual NOBLES 1287 RANSOM STREET HOLLAND MI 49424 U.S.A. CUSTOMER SERVICE:
More informationBEV-TENT COMPONENTS. Made in South Africa
BEV-TENT COMPONENTS REB MARKETING Distributing Agent Tel: (011) 452 9131 Cell: 072 965 6792 Fax: (011) 609 4615 15 Imvubu Road, Sebenza Ext 6, Edenvale orders@rebmarketing.co.za BEV-TENT 001 90 deg Elbow
More informationSmallest Connector with Removable Contacts
1 Ultra-Miniature 8STA Size 01 Connectors Smallest Connector with Removable Contacts Ultra compact design and very lightweight connector dedicated to the harshest of motorsport environments. Innovative
More informationExploded views meat slicer: 800S. DEKO Holland bv B Arnhem The Netherlands
Exploded views meat slicer: 800S DEKO Holland bv. 6827 B Arnhem The Netherlands DEKO Holland bv. Recommended spare parts list Part no. Description 260-07/ 260-08/ 260-5 Switch 230 Volt / Switch 400 Volt
More informationSCREENS TABBED PAGE SCREENS
SCREENS TABBED PAGE Index Page Bug Flaps.................................. 11 Crossbar................................... 2 Frame..................................... 2, 3 Handles...................................
More informationPARTS LIST WRANGLER 2730 DB & 3330 DB
PARTS LIST WRANGLER 2730 DB & 3330 DB WITH SIDEKICK CHEMICAL METERING WITHOUT SIDEKICK CHEMICAL METERING ORIGINAL INSTRUCTIONS RECOVERY TANK ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 3394411 TOP PLATE
More informationGround Clamps Cable Tray
COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS AND SOLDERLESS CONNECTORS Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both
More informationSection 11 Workstation Components
1 Section Quick and easy access to parts is made possible by the wide variety of trays, bins, and framing components available from Bosch. Individual workstation grab trays, containers, and ledges place
More informationAssembly TOOLS REQUIRED: 17mm and 14mm or equivalent wrenches.
Instructions for 3 Trimmer Rack, 3TR* *Patents Pending Assembly TOOLS REQUIRED: 17mm and mm or equivalent wrenches. 15 26 26 16 15 16 Attach the lower mounting brackets to the Trimmer Rack poles as shown
More informationSERVICE SHEET 34" WALK-BEHIND POWER TROWEL MODEL FT34 (THIS SERVICE SHEET APPLIES TO THE TROWELS WITH SERIAL NUMBER AND AFTER) WARNING
34" WALK-BEHIND POWER TROWEL (THIS APPLIES TO THE TROWELS WITH SERIAL NUMBER 0837 AND AFTER) WARNING To reduce the risk of injury, all operators and maintenance personnel must read and understand these
More informationAmphenol RF Interconnects TNC 31 Series Threaded Lock RF Connector System Materials
TNC 31 Series Threaded Lock RF Connector System Materials Body/Finish Contacts Centre MALE Centre FEMALE Insulator Gasket Crimp Ferrules* *Metal finishes Durability Brass/Nickel Brass/Gold Plated (Au)
More informationTidland Series 'C' Knifeholder MAINTENANCE MANUAL Crush Cartridge Class I, II, III Crush Slitting
Tidland Series 'C' Knifeholder MAINTENANCE MANUAL Crush Cartridge Class I, II, III Crush Slitting Please read and understand all the instructions before you start to maintain the Tidland Series 'C' Knifeholder.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS KR54, KR1654, & KR4954 Keyed Removable Mullion NOT FOR USE ON ELECTRIC OR FIRE RATED MULLIONS. This kit includes the following parts: (Not to scale) WARNING Remove key, reinstall,
More informationIMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C3215/C3215A
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C3215/C3215A Minor movement (or settling) can occur in some incidental harsh driving conditions (On or off road). A rubber bed mat is not a requirement
More informationPARTS LIST EXTRACTOR ACCESSORIES
PARTS LIST EXTRACTOR ACCESSORIES 3 - JET WAND - 4097101 101 4097961 HANDLE ASSEMBLY - INCLUDES: 1 102 9121210 1/4-20 X 5/8 HEX BOLT 2 103 ---------- HANDLE CLAMP 1 104 9120920 1/4-20 HEX NUT 2 105 9120777
More informationRAFTER VI. Installation and Operation CAREFREE WITH AUTOMATIC AWNING SUPPORT. RV Accessory PRODUCT OVERVIEW
CAREFREE RAFTER VI RV Accessory WITH AUTOMATIC AWNING SUPPORT Installation and Operation PRODUCT OVERVIEW The gives the awning user the ability to easily tighten the center fabric when the awning is extended.
More informationUrea/Adblue Hose Reel
www.scintex.com.au sales@scintex.com.au Model: SHR3408 Urea/Adblue Hose Reel Product Manual Specifications Spring driven drum: for automatic rewind. Locking ratchet: to maintain the desired length of hose
More informationMODEL # 1 MANUAL CAN OPENER
REV.B SERVICE MANUAL MODEL # 1 MANUAL CAN OPENER Model #1 Can Opener Assembly Procedure The Model #1 can opener will be assembled according to the following procedure. I. Model #1 Handle and Arbor Assembly
More informationBEV-TENT COMPONENTS AGENTS. GAUTENG REB MARKETING-Nick Tel:- (011) Fax:- (011)
BEV-TENT COMPONENTS FACTORY KNYSNA Tel:- (044) 3823215 / 3824707 / 3823152 Fax:- (044) 3825709 Cel:- 0825543947 info@bgboats.co.za accounts@bgboats.co.za orders@bgboats.co.za - Ordering www.bev-tent.co.za
More informationCONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9
CONTENTS PAGE NUMBER Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5 Hoist Rings Center Pull 6 Side Pull 7 Socket Head Stripper Bolts Inch 8 Metric 9 Punch Holder Shanks 10 Roller Stock Guides 11
More informationPR-429BF-600M. Bell 429 Blade Fold Kit Operations Manual
Table of Contents Table of Contents... 1 Record of Revisions... 2 References... 3 Introduction... 4 Contact Information... 4 Prerequisites... 5 First Time Use... 6 Blade Clamp Placement... 6 Blade Clamp
More informationSHOPFITTING. Grooved panel 664. Grooved panel accessories 665. Cash drawers 668. Partition hardware 675. Toilet partitions 686
SHOPFITTING Grooved panel 664 Grooved panel accessories 665 Cash drawers 668 SHELVING STRIPS & brackets 670 Partition hardware 675 Toilet partitions 686 662 www.nover.com.au www.nover.com.au 663 GROOVED
More informationPARTS LIST COLT COLT HEPA
PARTS LIST COLT 800-1250 - 1450 COLT HEPA - 1250-1450 MOTOR / LID ITEM PART NO. PART DESCRIPTION QTY. 101 0891201 TOP COVER 1 102 0294341 TOP MOTOR SEAL 1 103 0299861 STRAIN RELIEF CORD CLAMP 1 104 0891131
More informationLITE Spear Awning Instructions
LITE Spear Awning Instructions IMPORTANT NOTE: Please take a few minutes to become familiar with this entire document BEFORE beginning your installation. The time you spend doing this is well spent and
More informationSeven-eighths-spacing Rackmount Kit/Chassis Rackmount Kit. Techmar enclosure designs include interchangeable modular components,
SRK/CRK SERIES Seven-eighths-spacing Rackmount Kit/Chassis Rackmount Kit Techmar enclosure designs include interchangeable modular components, punched hole patterns and captive hardware, resulting in a
More informationBerkeley Cast Iron Impeller B4EYRMBH BEARING FRAME MOUNT. Flanged Case, Packing Construction. Table I
Cast Iron Flanged, Packing Construction B4EYRMBH Page 0. Date March 4, 03 Supersedes /0/09 9 3 3 8 8 B/M B53 CW M L034.88" 3C 5 8 3B 80 A 3A 3 See Supplement B 9 3, See See Shaft (Not sold separately)
More informationCloset and Specialty Hardware
Closet and Specialty Hardware Door & Mirror Hardware...100 Magnetic and Bullet Catches... 100 Sliding Door Pulls........................................ 100 Mirror Clips/Glass Clips, Fittings and Latches...
More informationFarm Hardware. Farm Hardware. To order call: Fax:
1 Weather aps lear zinc plated steel. Single bolt installation, silencer block, heat resistant rivets and bushings. Weather aps Muffler lamps Stroke ontrol FITS PIPE DIMETER 11200 1-1/2 1-11/16 11201 1-3/4
More informationwww Littleton, 9861.horn Titan Park Circle CO etoutdoors.com BEYOND COMPARE
9861 Titan Park Circle Littleton, CO 80125 303.408.0250 www.hornetoutdoors.com BEYOND COMPARE Cargo Bed Rack RZR 2015 RZR-900, 900-S, 900-4 Rack with removable bottom $399.95 Hornet Roof Rack Spare Tire
More informationDUPLEX STRAINERS 800-KECKLEY ( ) BULLETIN NO / FAX: 847/ WEB SITE:
BULLETIN NO. 9400- DUPLEX STRAINERS 800-KECKLEY (800-2-9) 847/674-8422 FAX: 847/674-206 E-MAIL: SALES@KECKLEY.COM WEB SITE: WWW.KECKLEY.COM NO QUESTION. WE HAVE THE ANSWERS. Shown with Optional Differential
More informationTuf-Lite and Tuf-Lite II Fans 6000M Series Hub
Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 32.8 or 10 Meter Diameter Hudson Tuf-Lite and Tuf-Lite II fan blades Hudson Tuf-Lite (black) fan blades
More informationThe Contractor s Choice / America s Choice Corporate: (800) Fax: (201)
The Contractor s Choice / America s Choice Corporate: (800) 503-9805 Fax: (201) 964-9030 www.elgenmfg.com MISSION STATEMENT Striving to become the #1 single source solutions provider, serving sheet metal
More informationHardware. Personal Customer Service / Same Day Shipping / No Risk Guarantee. Clamps
ASSORTMENT ASSORTMENT Hardware Clamps Worm Drive Hose Clamps Slotted Hex Head Hose Clamps Exceeds SAE requirements. Heavy duty four-piece, Quadra-lok construction. Band made of grade 300 series stainless
More information2M Hermetic General Information. Why 2M Hermetic? GHEC 81. Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard. Page Guide.
2M General Information Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard Averaging less than half the size and weight of their 38999 ancestors, Amphenol s 2M Micro38999 series are an
More informationPINS & BUSHINGS INCH
www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH Steel, Bronze & Self-Lubricating Friction & Ball Bearing Components www.danly.com PINS & BUSHINGS INCH Strategically located to serve
More informationFLEX KEY ASSEMBLY. ..._ o RAFTER ARM TUBE MAIN ARM TUBE CAP NUT CLAW HINGE
ZIP DEE Inc. 96 Crossen Ave. Elk Grove Village, IL 60007(847)437-0980 (800)338-2378 HEAD CASTING AWNING RAIL FLEX KEY ASSEMBLY..._ o GM1 Installation Instruction GMC Motorhome RAFTER ARM TUBE MAIN ARM
More informationTuf-Lite and Tuf-Lite II Fans 6000 Series Hub
Tuf-Lite and Tuf-Lite II Fans 6000 Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 32 and 33 Diameter Hudson Tuf-Lite and Tuf-Lite II fan blades Hudson Tuf-Lite (black) fan blades are made
More informationXENON HELIDECK FLOODLIGHT INDUSTRY USER MANUAL
TEF 9964 XENON HELIDECK FLOODLIGHT INDUSTRY USER MANUAL IMPORTANT Read this instruction carefully before installing the product 996A106032 TUM 1024 REV. E 06.02.14 Tranberg AS P.O. Box 8033 N-4068 Stavanger
More informationMS20663 and MS NAS1435E and NAS1435K
All original Text, Tables, and Genuine Aircraft Hardware Co. MS20663 and MS20664 Ball End, Wire Rope, Swaging, Double and Single Shank MATERIAL: STEEL, CORROSION RESISTANT IN ACCORDANCE WITH FEDERAL STANDARD
More informationData Sheet for Precision Potentiometer
AL(R)17/19 soldering lugs The AL(R)17/19 potentiometers in 22 mm housing are suitable for applications where a precise and economical multiturn potentiometer is important. Economical and precise multiturn
More informationDesign Standards. Utility Manhole Covers
Design Standards Utility Manhole Covers Texas A&M University in College Station has standardized utility manhole covers to be used for all underground utility access on campus. All new utility manhole
More information29PC RATCHET SCREWDRIVER SET
83-504 29PC RATCHET SCREWDRIVER SET OLYMPIA TOOLS INTERNATIONAL INC. Including: 15pc 1/4" Screwdriver Bits: 1/8", 5/32", 3/16", 1/4" x 2, 9/32" PH1, PH2, PH3, PZ1, PZ2, T10, T15, T20, T25 1pc Adaptor 1pc
More informationDesign Standard. Utility Manhole Covers
Design Standard Texas A&M University in College Station has standardized utility manhole covers to be used for all underground utility access on campus. Until further notice, manhole covers manufactured
More information2M804 Push-Pull Crimp Receptacles Ordering Guide for 2M , 002, 003, 004
Push-Pull Crimp Receptacles Ordering Guide for -001, 002, 003, 004 Micro38999 1. 2. 3. 4. 5. 6. 7. SERIES SHELL SERVICE SHELL SIZE-INSERT CONTACTS KEYING SUFFIX STYLE CLASS ARANGEMENT -00X -06 ZNU 6-7
More informationHVAC Products for Better Ductwork Product Overview
HVAC Products for Better Ductwork Product Overview for better ductwork TABLE OF CONTENTS ACCESS DOORS For Rectangular Duct and Other Flat Surfaces RD Access Doors Page 1 RD Access Door Adapter Kit for
More informationTRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH
www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH www.danly.com PINS & BUSHINGS INCH Service We Deliver and Quality You Can Depend On DANLY IEM is a leading manufacturer of die sets and
More informationMOTORIZED OR MANUAL LATERAL ARM BOX AWNING. Product Overview... 1 Component Checklist... 2
INSTALLATION MANUAL FREEDOM AWNING RV MOTORIZED OR MANUAL LATERAL ARM BOX AWNING TABLE OF CONTENTS Product Overview... 1 Component Checklist... 2 Installation... 3 Attaching the Mounting Plates... 3 Mounting
More informationFormulate Designer Series 10 Backwall - Kit 10
Formulate Designer Series 10 Backwall - Kit 10 FMLT-DS-10-10 Formulate Designer Series 10ft displays have unique stylistic features and shapes, are portable and easy to assemble. The aluminum tube frame
More informationPARTS LIST MODEL M-1 - PIG
PARTS LIST MODEL M-1 - PIG FAN HOUSING ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 1090601 LABEL KIT - M-1 PIG 1 102 2590019 SWIVEL COUPLING ASSEMBLY - INCLUDES: 1 102A 2590111 HOSE COUPLING GASKET 1 103
More informationAviation Snips. Multi-Cable Cutter
CUTTING tools Aviation Snips 0653-01L Drop-forged, chrome-moly steel blades with serrated edges. Includes left, right and straight-cut versions with color coded grips green (right), yellow (straight),
More informationMX Series MX40-7XXX Series MX40-6XXX Series. Selection Guide. Applications. DuraDrive Series Actuator (Includes Accessories)
MX40-6043 Series MX40-7XXX Series MX40-6XXX Series Selection Guide Applications DuraDrive Direct Coupled Actuators are designed to accept two-position, floating, or proportional control from a DDC system
More informationSH, MP, HP, EZ-SH, EZ-MP, EZ-HP Series Design Features & Benefits COXREELS. SH, MP, HP, EZ-SH, EZ-MP, & EZ-HP Series Design Features
COXREELS SH, MP, HP, EZ-SH, EZ-MP, & EZ-HP Series Design Features The following are features and benefits of our Standard Heavy Duty and EZ Coil TM Series Reel 1. GUIDE ARM: The Coxreels guide arm is stamped
More informationHINGES & STAYS. Hinges & Stays Large Take-Apart Hinge. Medium Take-Apart Hinge
Hinges & Stays HINGES & STAYS TAKE-APART-CONTINUOUS-WELD-ON-CONCEALED-STRAP-STOP-BUTT-OFFSET-LIFT-OFF-STAY 0.1 0-180800.0 Mat: Steel Finish: Zinc Plate Wt:.0kg /.1lbs.8. Acts as a hinge but allows quick
More informationSPECIAL-DESIGN Deburring Tools.
SPECIAL-DESIGN Deburring Tools. 75 Contour-following blades provide for perfectly clean and even deburring of any kind of edge. Handles and Blades for Deburring work involving: soft and hard material types
More informationInstruction Manual Remote Swabbing and Microbiological Sampling and Teflon template tools Version , Rev.0
ASSEMBLY AND OPERATIONAL INSTRUCTIONS The remote swabbing and microbiological sampling tool and the Teflon template tool are shipped partially assembled. Complete assembly instructions are provided below:
More informationEPIC Rectangular Connectors HBE 24 Plugs & Receptacles
HBE 24 Plugs & Receptacles HBE 24 SCREW & CRIMP TERMINATED INSERTS SCREW TERMINATED View from Cable Side CRIMP TERMINATED Contacts Sold Separately Description Screw Terminated with wire protection Screw
More informationInstallation and operation instructions for KINEMAX burners
-. - Installation and operation instructions for KINEMAX burners Application requirements View port A view port to observe burner flame is essential to inspect the flame aspect. Locate the view port downstream
More informationData Sheet for Precision Potentiometer
The ALI(R)17/19 potentiometers in mm housing are suitable for applications where a precise multiturn potentiometer increased radial shaft loads is important. ALI(R)17/19 reinforced bearing ALI(R)17/19
More informationWIDESPREAD LAVATORY MODELS WITH HI-ARC SPOUT
5951, 5961, 5981, 5983, 5993 SERIES MT122B INSTALLATION INSTRUCTIONS THESE INSTRUCTIONS MUST BE LEFT WITH HOMEOWNER WIDESPREAD LAVATORY MODELS WITH HI-ARC TRADITIONAL CROSS NOTE: Handle Inserts are not
More informationAdvantage Plus TIM-3600 Series Reel
Read the following precautions and instructions before you begin assembly or using. Failure to comply with these instructions could result in personal injury or property damage. Keep these instructions
More informationFormulate Designer Series 10 Backwall - Kit 06
Formulate Designer Series 10 Backwall - Kit 06 FMLT-DS-10-06 Formulate Designer Series 10ft displays have unique stylistic features and shapes, are portable and easy to assemble. The aluminum tube frame
More informationFor full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
R Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 6-5480 www.cmafh.com Safety Interlock Switches TL19 Safety Interlock Switch with uard Door Locking High
More informationProduct Description of Klozit Sliding Glass Door Closing and Latching System
Product Description of Klozit Sliding Glass Door Closing and Latching System KLOZIT Door Closers: The Klozit sliding glass door closer is based upon a gas spring, similar to those found in car hatchbacks.
More informationHardware Resources
Hardware Resources Hardware Resources represents Quality, Integrity, and Reliability, while upholding the highest standards of service and responsibility in the industry. We are committed to constantly
More informationFRAMELESS GLASS SLIDING FOLDING SYSTEM Sliding Folding System SPECIALISED SLIDING SYSTEMS
Sliding Folding System Sliding Folding Door System can be a very attractive and practical use of space, helping to create a contemporary design in your home and offices. Our well experienced person can
More informationSpecial Three-Phase Motors with HSK-C Tool Holder for Manual Quick Tool Change
Special Three-Phase Motors with HSK-C Tool Holder for Manual Quick Tool Change Catalogue 21 E High speed three-phase motors with HSK-C tool holder for manual tool change protection type: IP54 Motor description
More information