Hardware Solutions Contents
|
|
- Sophie Lewis
- 6 years ago
- Views:
Transcription
1 Hardware Solutions Contents Front Retainers MS14108 Type Ruggedized Self-locking Front Retainers Ruggedized Self-locking Front Retainer Ruggedized Self-locking Front Retainer SLR1 Self-locking Front Retainer SLR2 Self-locking Front Retainer Lockwire Front Retainer Rear Retainers Spring Loaded Rear Retainer Spring Loaded Rear Retainer Bushing Hardened Stainless Steel Bushing Hooks J-Hook for LRU Bonding Straps Electrical Grounding Strap
2 Retainer MS14108 Type Family of Ruggedized Self-locking Front Retainers Part Number MS Number Weight Material A B Max Tensile Load without clevis MS oz Stainless steel 1.88 [47.8] 1.00 [25.4] 1,750 lbs without clevis MS oz Stainless steel 2.75 [69.9] 1.88 [47.8] 1,750 lbs without clevis MS oz Stainless steel 1.88 [47.8] 1.00 [25.4] 1,000 lbs without clevis MS oz Stainless steel 2.75 [69.9] 1.88 [47.8] 1,000 lbs Type UNF-2A THREAD.193 [4.90] DIA B.187 [4.75] A.235 [5.97] 1.50 [38.1] DIA Type UNF-2A THREAD.128 [3.25] DIA B A.187 [4.75].195 [4.95].75 [19.1] DIA
3 Retainer Ruggedized Self-locking Front Retainer Part Number MS Number Weight Material A B Max Tensile Load without clevis MS oz Stainless steel 1.88 [47.8] 1.00 [25.4] 1,750 lbs without clevis MS oz Stainless steel 2.75 [69.9] 1.88 [47.8] 1,750 lbs with clevis 2.5 oz Stainless steel 1.88 [47.8] 1.00 [25.4] 1,750 lbs with clevis 2.7 oz Stainless steel 2.75 [69.9] 1.88 [47.8] 1,750 lbs.500 [12.70].38 [9.7].193 [4.90] DIA.187 [4.75] B A.161 [4.09] DIA.177 [4.49] DIA UNF-2A THREAD (Optional Clevis Bracket).235 [5.97] 1.50 [38.1] DIA
4 Retainer Ruggedized Self-locking Front Retainer Part Number MS Number Weight Material A B Max Tensile Load without clevis MS oz Stainless steel 1.88 [47.8] 1.00 [25.4] 1,000 lbs without clevis MS oz Stainless steel 2.75 [69.9] 1.88 [47.8] 1,000 lbs with clevis 1.7 oz Stainless steel 1.88 [47.8] 1.00 [25.4] 1,000 lbs with clevis 1.8 oz Stainless steel 2.75 [69.9] 1.88 [47.8] 1,000 lbs [ 12.70] [9.7].128 [3.25] DIA B A.187 [4.75].135 [3.43] DIA.144 [3.66] DIA UNF-2A THREAD.75 [19.1] DIA (Optional Clevis Bracket).195 [4.95]
5 Retainer SLR1 Self-locking Front Retainer Part Number Weight Material Max Tensile Load SLR1-AB with clevis & pin 1.6 oz All stainless steel 1,000 lbs SLR1-BB without clevis & pin 1.4 oz All stainless steel 1,000 lbs 2.85 [72.4].500 [12.70] 1.85 [47.0].135 [3.43] DIA.144 [3.66] DIA.19 [4.8].38 [9.7] 1.0 [25.4] MIN FULLY OPENED.75 [19.1] DIA.128 [3.25] DIA HOLE THRU STUD UNF-2A THREAD
6 Retainer SLR2 Self-locking Front Retainer Part Number Weight Material Max Tensile Load SLR2-AB with clevis & pin 1.6 oz Stainless steel with aluminum knob 1,500 lbs SLR2-BB without clevis & pin 1.4 oz Stainless steel with aluminum knob 1,500 lbs.500 [12.70] 2.97 [75.4] 1.94 [49.3] 1.72 [43.7].161 [4.09] DIA.177 [4.49] DIA.19 [4.8].38 [9.7] 1.0 [25.4] MIN FULLY OPENED 1.13 [28.7] DIA.128 [3.25] DIA HOLE THRU STUD UNF-2A THREAD
7 Retainer Lockwire Front Retainer Part Number Weight Material Max Tensile Load oz Stainless steel with cadmium plated steel wing nut 1,750 lbs.177 [4.49] DIA 2.97 [75.4] 1.94 [49.3] 1.72 [43.7].161 [4.09] DIA.500 [12.70].38 [9.7] 1.0 [25.4] MIN FULLY OPEN.070 [1.78] DIA 2 PLACES LOCKWIRE HOLE.75 [19.1] DIA UNF-2A THREAD.19 [4.8].500 [12.70] DIA 1.25 [31.8] MAX
8 Rear Retainer Spring Loaded Rear Retainer Part Number Weight Material oz Stainless steel.50 [12.7] MAX EXTENDED 1.91 [48.5].12 [3.0] MAX FULLY RETRACTED.046 [1.17] REF.625 [15.88] HEX.468 [11.89] DIA HOLE IN PANEL 1.06 [26.9].301 [7.64] DIA.306 [7.77] DIA.06 [1.6] THICK PANEL.221 [5.61] GAGE DIA
9 Rear Retainer Spring Loaded Rear Retainer Part Number Weight Material oz Stainless steel with aluminum block PN is now [4.8] 1.91 [48.5] 1.06 [26.9].44 [11.2].08 [2.03] MAX WHEN FULLY RETRACTED.301 [7.64] DIA.221 [5.61] GAGE DIA.306 [7.77] DIA.75 [19.1].38 [9.6].75 [19.1].409 [10.39].375 [9.52].435 [11.05] DIA 8-32 x.219 [5.56] DP THREADS 4 PLACES.500 [12.70].25 [6.4]
10 Bushing Hardened Stainless Steel Bushing Part Number Weight Material grams 17-4 Stainless steel cadmium plated.400 [10.16].062 [1.57].3761 [9.553] DIA.3756 [9.540] DIA.2515 [6.388] DIA.2500 [6.350] DIA
11 Hook J-Hook for LRU Part Number Weight Material grams Stainless steel grams Stainless steel [4.62] DIA THRU 2 HOLES.182 [4.62] DIA THRU 2 HOLES.090 [2.29].125 [3.17].562 [14.27] [30.96] 1.34 [34.0] REF.562 [14.27] [29.17] 1.31 [33.3] REF.438 [11.13].328 [8.33].312 [7.92].219 [5.56].438 [11.13].250 [6.35]
12 Bonding Strap Electrical Grounding Strap Part Number Weight Material grams Phosphor bronze grams Phosphor bronze [.25] THK.50 [12.7] [.13] THK.75 [19.1] 6.00 [152.4].265 [6.73] DIA 4.00 [101.6].196 [4.98] DIA.170 [4.32] DIA.196 [4.98] DIA 1.00 [25.4].188 [4.77] TYP 1.00 [25.4].188 [4.77] TYP.34 [8.6]
3/8 BORE MOUNTING BRACKETS
3/8 BORE MOUNTING BRACKETS 11767 Ceramic Insulator Use with cylinder having #8-32 threaded shaft to insulate cylinder from heat or electricity #8-32 thd. - thru dia. Male Clevis 11996 Mounts in rear of
More information2M804 Push-Pull Crimp Receptacles Ordering Guide for 2M , 002, 003, 004
Push-Pull Crimp Receptacles Ordering Guide for -001, 002, 003, 004 Micro38999 1. 2. 3. 4. 5. 6. 7. SERIES SHELL SERVICE SHELL SIZE-INSERT CONTACTS KEYING SUFFIX STYLE CLASS ARANGEMENT -00X -06 ZNU 6-7
More informationElectrical Specifications. Dimensions (inches)
Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power
More informationElectrical Specifications. Dimensions (inches)
Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power
More information2M801 Dual-Start ACME Threads
Dual-Start ACME Threads Ordering Guide for 1. 2. 3. 4. 5. 6. SERIES SHELL STYLE SERVICE CLASS SHELL SIZE-INSERT AGGMT CONTACTS KEYING -007-01 C 5-3 P A 1. SERIES Type Part # Description PLUG CRIMP PCB
More information2M Hermetic General Information. Why 2M Hermetic? GHEC 81. Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard. Page Guide.
2M General Information Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard Averaging less than half the size and weight of their 38999 ancestors, Amphenol s 2M Micro38999 series are an
More informationMS/Standard MS3450 wall mounting receptacle
MS3450 wall mounting receptacle Receptacle, lange Wall Mount, ed oupling Military No. MS3450 mphenol/matrix No. 9440 Typ. Typ. Key oupling lue olor and ccessory qually Placed 120 part Max 4 oles Typ. D
More informationA A A T E C H N O L O G Y
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. H A R D W A R E C A T A L O G TOTAL SOLUTION SERVICE For the Industrial Piping Marketplace 2011 www.aaatech.com 4 0 Y E A R S S E R V I N G I N D U S T
More informationPRODOTTI STANDARD PRODOTTI STANDARD
PRODOTTI STANDARD PRODOTTI STANDARD. Nuovi Prodotti... Pagg. 2-6 2. Cuscinetti antifrizione... Pagg. 7-0 3. Gabbie per cuscinetti a sfera... Pagg. - 3 4. Clips per aste filettate... Pag. 4 5. Accessori
More informationPole Line Hardware. Catalog
Catalog Table of Contents Anchor Rods... 3 Expanding Anchors... 3 Pole Bands... 4 Adjustable Pole Bands... 4 Connecting Links... 4 Malleable Guy Clips... 4 Shackles... 5 Crossarms... 5 Steel Braces...
More informationTOOLING COMPONENTS. tel fax Clamping Kits Step Blocks...7. Driver Studs...
Clamping Kits... 2-8 Step Blocks...7 Driver Studs... 9-13 Bolts, Screws... 14-20 Nuts, Washers... 21-29 Sex Bolts... 30-31 Clamps... 32-44 Screws... 45-49 Knobs & Levers... 49-53 Rest Pads...54 Index Plungers...
More informationLift Handle. Spring Loaded Flush Lift. Locking Hasp. Swivel Hasp (Stamped) Safety Hasp (Stamped) w/fixed Plate PWB-3977S 5/16 2-3/16 3
Lift Handle Made of Stamped 316 Stainless Steel Part No. Height Width Length PWB-3977S 5/16 2-3/16 3 Spring Loaded Flush Lift Made of Stamped 316 Stainless Steel Part No Dia. High Spring PWB-3105SA 2 11/16
More information6. Textile Products. Cargo Restraint Nets. Please feel free to contact us for your projects!
6. Textile Products Cargo Restraint Nets and Straps 37 6. Textile Products Cargo Restraint Nets allsafe JUNGFALK manufactures for various customers cargo restraint nets designed to their specific requirements.
More informationMS20663 and MS NAS1435E and NAS1435K
All original Text, Tables, and Genuine Aircraft Hardware Co. MS20663 and MS20664 Ball End, Wire Rope, Swaging, Double and Single Shank MATERIAL: STEEL, CORROSION RESISTANT IN ACCORDANCE WITH FEDERAL STANDARD
More informationPARTS LIST CHARGER 2022 ABLT
PARTS LIST CHARGER 2022 ABLT HEAD ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 5990731 SPRING CLIP PAD HOLDER SET INCLUDES: 1 101A 9120205 #8 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW PACK OF 3 3 102 9121490
More informationCONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9
CONTENTS PAGE NUMBER Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5 Hoist Rings Center Pull 6 Side Pull 7 Socket Head Stripper Bolts Inch 8 Metric 9 Punch Holder Shanks 10 Roller Stock Guides 11
More informationSteadiCam Parts List*
SteadiCam Parts List* A. 1 Bogen 3232 Monopod Swivel Tilt Head B. 1 1/2 internal to 1/2 external brass bushing flare adapter (part 9402249 at osh.com¹) C. 2 3/8 internal to 1/2 external brass bushing flare
More informationPallet Feet & Fittings SQUARE
SQUARE 1410 Thickness: 2.3 Weight (Kg/100): 25 Post size(mm): 40 per ft (Tonne): 2.46 PALLET FOOT 89MM SQUARE X 2.3 mm THICK 0138 Thickness: 2.3 Weight (Kg/100): 50 per ft (Tonne): 2.19 PALLET FOOT 127MM
More informationstyle vision & quarter turns quarter turns section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
quarter turns vision & style quarter turns INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 3 quarter turns No. 626-PK Patent Pending
More informationWRANGLER 1710AB, 2010AB
WRANGLER 1710AB, 2010AB WIRING DIAGRAM ITEM PART NO. DESCRIPTION QTY 1 1393251 WIRE ASSEMBLY - CIRCUIT BREAKER TO BRUSH SWITCH 1 2 1393261 WIRE ASSEMBLY - CIRCUIT BREAKER TO VACUUM SWITCH 1 3 1393271 WIRE
More informationBEV-TENT COMPONENTS. Made in South Africa
BEV-TENT COMPONENTS REB MARKETING Distributing Agent Tel: (011) 452 9131 Cell: 072 965 6792 Fax: (011) 609 4615 15 Imvubu Road, Sebenza Ext 6, Edenvale orders@rebmarketing.co.za BEV-TENT 001 90 deg Elbow
More informationStrut Clamp Pipe & Conduit
PRODUCT SPECIFICATIONS 0F Strut Clamp Pipe & Conduit Size: Steel pipe sizes 2" through 0" Finish: Electro-Galvanized Pipe clamps are designed to fit into the opening of 5 /8" wide channel profiles Pre-Assembled
More informationIcelock Ratchet 621 Icelock Lanyard 631 Icelock Valve 641 Icelock Smooth 651
Extremely light-weight and low build height. Fabrication Tools make the weight fabrication process very effective Very strong and durable Socket Adapters rated up to 100kg (220lbs) and 166kg (365lbs) Easily
More information3L4. Hub is chamfered. Dimension C may be changed upon request. Engineering charges may apply to certain sizes. 1/4 M6 5/16 M8 3P1 * TK4 * 3P4 3L4
RT2 3P1 / 3P4 3L4 3-Prong Knobs 3W4 Knob Style A B C D RT2.75.50.23.51 3P1 1.25.62.50.95 TK4 / TK7 3P1C 1.25.62.26.72 TK4 1.74.58.36.86 3P4 1.75.75.49 1.05 3P4C 1.75.75.26.82 3P4Aº 1.75.75 /.57 1.25 1.82
More informationWORKHOLDING COMPONENTS
Adjustable Clamp Heels... 274 Adjustable Clamp Rests...273 Adjustable Step Blocks...284 Assemblies, Spherical Flange...260 Bolts, Dovetail...258 Bolts, Swing... 241 Bolts, T...258 Bolts, T-Slot...257 Bolts,
More informationBEV-TENT COMPONENTS. Made in South Africa
BEV-TENT COMPONENTS REB MARKETING Distributing Agent Tel: (011) 452 9131 Cell: 072 965 6792 Fax: (011) 609 4615 15 Imvubu Road, Sebenza Ext 6, Edenvale orders@rebmarketing.co.za BEV-TENT 001 90 deg Elbow
More informationHINGES & STAYS. Hinges & Stays Large Take-Apart Hinge. Medium Take-Apart Hinge
Hinges & Stays HINGES & STAYS TAKE-APART-CONTINUOUS-WELD-ON-CONCEALED-STRAP-STOP-BUTT-OFFSET-LIFT-OFF-STAY 0.1 0-180800.0 Mat: Steel Finish: Zinc Plate Wt:.0kg /.1lbs.8. Acts as a hinge but allows quick
More informationGround Clamps Cable Tray
COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS AND SOLDERLESS CONNECTORS Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both
More informationW & A PARTS MANUAL LEVEE PLOW STANDARD. Model No Blade Model No Blade (Parts Only)
W & A PARTS MANUAL LEVEE PLOW STANDARD Model No. 824 -- 8 Blade Model No. 836 -- 10 Blade (Parts Only) SPECIALIZED FARM EQUIPMENT Quality Products from W & A MANUFACTURING COMPANY P.O. Box 5238, Pine Bluff,
More informationP3000 UNIVERSAL Clamp-On
IHI INSTRUCTION MANUAL Required Tools P3000 UNIVERSAL Clamp-On Wrench Allen Key P3001 65 ENDCAPS P3011 65 BLACK P300 7 ENDCAPS P301 7 WHITE P3003 ENDCAPS P3013 SILVER PART# DESCRIPTION ENDCAPS SIDE SUPPORTS
More informationDistinctive Characteristics
Distinctive Characteristics Base of heat resistant resin meets ULV-0 flammability rating. Maximized voltage capability of V allows use in medium source applications and increases operating life. Award-winning
More informationLockable Fasport. IFP-600 Dimensions Overall Height 9.5" Overall Width 10" Opening Dia. 6.5" Weight 9 lbs. Model
Lockable Fasport IFP-600 Overall Height 9.5" Overall Width 10" Opening Dia. 6.5" Weight 9 lbs Note: Specify glass thickness when ordering. Die cast body and lid. A12 Aluminum body and ASSA deadbolt. Steel
More informationIMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS. Part # A7006
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS Part # A7006 Parts List Wobble Stopper Body Wobble Stopper Shaft Camper Bracket Lower Bracket Assembly Upper Bracket Upper Bracket Clamp 3/8 SAE Flat
More informationAn Improved Pedestal To A Version One Worksurface
Steelcase, Inc. Grand Rapids, MI 49501 U.S.A. 1-888-783-3522 An Improved Pedestal To A Version One Worksurface NOTE: This installation applies to 25, 30, and 35 deep worksurfaces with lock rail only. VERSION
More informationLOAD BINDER WINCHES AUTO TENSIONER (AIR WINCH) PART NO 30/303899
LOAD BINDER WINCHES AUTO TENSIONER (AIR WINCH) PART NO 30/303899 NORMAL OPERATION 1. Release locking pawls (2 of). 2. This allows drum to run free and strap can be pulled off drum. 3. Throw over load,
More informationBEV-TENT COMPONENTS AGENTS. GAUTENG REB MARKETING-Nick Tel:- (011) Fax:- (011)
BEV-TENT COMPONENTS FACTORY KNYSNA Tel:- (044) 3823215 / 3824707 / 3823152 Fax:- (044) 3825709 Cel:- 0825543947 info@bgboats.co.za accounts@bgboats.co.za orders@bgboats.co.za - Ordering www.bev-tent.co.za
More informationKAWNEER 1786 RIM EXIT DEVICE
FEBRUARY, 2015 1 DOOR STILE Device C L 40" 41-9/32" Cylinder C L Bottom of door RIM EXIT DEVICE LOCATION DOGGING KEY EXIT DEVICE FILLER PLATE CYLINDER & CYLINDER RING HOUSING COVER CYLINDER INSTALLATION
More informationEdward W. Daniel, LLC
Edward W. Daniel, LLC Manufacturers of Diamond D Hardware Since 1921 Manufacturing Warehousing & Distribution Packaging Edward W. Daniel, LLC Manufacturers of Diamond D Hardware Since 1921 About EWD Capabilities...
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS C24DA/GA-SERIES STEAMERS C24GA6 C24GA10 C24DA6 C24DA10 ML-138085 ML-138088 ML-152022 ML-152023 VULCAN-HART DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC 3600 NORTH POINT BLVD.,
More informationWARRENTY Void IF BROKEN 48,0 COMBINATIONS FIXED CYLINDER A A A A M = MASTER KEY SYSTEM: SUPPLIED TO ORDER ONLY
Coin Lock 264/265/268 COIN RETURN TRAY 33,2 113,5 0,0 18,0 28,8 FOR 264,265 & 269 19,0 FOR 268 26,2 16,5 13,5 34,0 6,0 WARRENTY Void IF BROKEN 48,0 32,5 15,4 18,0 Ø 6,5 9,8 3,0 Ø22,0 1,5 5,6 (RH) REMOVE
More informationParts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns:
7-1 Section 7 Using the Illustrated List The parts lists provided in this section are organized into the following columns: Item Identifies illustrated parts that are available from Nordson Corporation.
More informationHardware. Personal Customer Service / Same Day Shipping / No Risk Guarantee. Clamps
ASSORTMENT ASSORTMENT Hardware Clamps Worm Drive Hose Clamps Slotted Hex Head Hose Clamps Exceeds SAE requirements. Heavy duty four-piece, Quadra-lok construction. Band made of grade 300 series stainless
More informationParts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns:
7-1 Section 7 Using the Illustrated List The parts lists provided in this section are organized into the following columns: Item Identifies illustrated parts that are available from Nordson Corporation.
More informationPage 92
Page 92 Page 90 Page 91 Page 89 Page 94 Page 93 Page 88 Page 87 175 c c a a b 175 800 750 1 STAINLESS STEEL ANGLE FLOOR OUTSIDE SUBSTATION 1700 400 A A 100 100 1600 13 BOLT SEE DETAIL D ON R.C.C.
More informationD. S. HULL COMPANY, INC
Perko Flush Ring Pull Chrome plated zinc. Order No Mfg No O.D. List 340427 1232DP1CHR 1-5/8 $15.78 340434 1232DP2CHR 2 $18.38 Perko Flush Lifting Handle Chrome plated brass. Screw size: #8. Note: 776DP2
More informationIMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C3215/C3215A
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C3215/C3215A Minor movement (or settling) can occur in some incidental harsh driving conditions (On or off road). A rubber bed mat is not a requirement
More informationREAD ME FIRST! IMPORTANT WARNING! ENG. Roof top tent
Roof top tent ENG TENT031 220 min READ ME FIRST! Thank you for purchasing a Front Runner Roof Top Tent. Before you start, take a moment to familiarize yourself with these Fitting Instructions and the components
More informationParts Catalog. S-Series Slicer Manual S13. Model:
, 08 99506 ECN 035 Parts Catalog S-Series Slicer Manual Model: S3 S3 /3/08 Rev. M IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE FOOD
More informationM129 SERVICE MANUAL- M129 MODEL #G-2 MANUAL CAN OPENER
SERVICE MANUAL- M129 MODEL #G-2 MANUAL CAN OPENER Model #G-2 Can Opener Assembly Procedure The Model #G-2 can opener will be assembled according to the following procedure. I. Model #G-2 Handle and Arbor
More information280 Propane Barbecue Assembly Manual
280 Propane Barbecue Assembly Manual 85-3001-8 (G20718) Propane 1 Year limited Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts claims must
More information4-foot Economy Sign Post. 4-foot post is rated at 2 pounds per foot. 7-foot Economy Sign Post
Introduction: ComplianceSigns.com offers a variety of sign posts, sign mounting hardware, sign bases, mounting tape and more to mount your safety signs indoors or out. We offer three styles of sign posts,
More informationKITFOX WING FOLDING INSTRUCTIONS
Kitfox KITFOX WING FOLDING INSTRUCTIONS 1 AIRCRAFT CORPORATION These instructions describe the procedures for folding the wings of the Kitfox family of aircraft. Although the instructions apply to all
More informationOxford Round. Carton # 1. Carton # 2. Carton # 3 ITEM DESCRIPTION PART #
Oxford Round Part # 420833-11 Round Packing List ITEM DESCRIPTION PART # 8 21 24 27 30 33 Carton # 1 Carton # 2 Carton # 3 8 x52 Gray Pearl 130309 1 - - - - - - - - x52 Gray Pearl 130310-1 - - - - - -
More informationSeven-eighths-spacing Rackmount Kit/Chassis Rackmount Kit. Techmar enclosure designs include interchangeable modular components,
SRK/CRK SERIES Seven-eighths-spacing Rackmount Kit/Chassis Rackmount Kit Techmar enclosure designs include interchangeable modular components, punched hole patterns and captive hardware, resulting in a
More informationLOUISIANA BURNER / The Millers and the staff of Louisiana Burner
Louisiana Burner 634 Main Street Pineville, LA 71360 318 318--473 473--2868 Fax 318 318--473 473--2807 www.louisianaburners.com catalog2016 LOUISIANA BURNER Dear Customers, Last year, the Miller Family
More informationTuf-Lite II Fans 8000 Series Hub
Tuf-Lite II Fans 8000 Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 34 through 40 Diameter Hudson Tuf-Lite II (white, prev. blue**) fan blades are made from
More informationIMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2213 / C2220
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2213 / C2220 Minor movement (or settling) can occur in some incidental harsh driving conditions (On or off road). A rubber bed mat is not a requirement
More informationTABLE & FURNITURE LEGS
LEGS & LEVELERS TABLE & FURNITURE LEGS Furniture Levelers Furniture levelers from, perfect for entertainment and built-in shelving units. Table Legs The PMI Table Leg line has been very popular for more
More informationCheck Out Our Web Site at: To Order, Call Toll-Free From anywhere in North America
Central Tarp has pioneered the design and evolution of the chip trailer Rollover Tarp. Here are just some of the features that have made our tarps so long-lasting! Premium Quality Vinyl: We use North American
More informationPL500A Platform Extension
PL500A Platform Extension Operator Manual Copyright 2009 ServerLift Corporation 821 N 2nd Street Phoenix, AZ 85004 VOICE: 602.254.1557 FAX: 602.412.4479 821 N 2nd Street Phoenix, AZ 85004 VOICE: 602.254.1557
More informationARCHITECTURAL DOOR HARDWARE PIVOT CATALOG. January 1, 2017 v3 West Coast Office (800) East Coast Office (800) intldoorclosers.
ARCHITECTURAL DOOR HARDWARE PIVOT CATALOG January 1, 2017 v3 West Coast Office (800) 5444422 East Coast Office (800) 2256737 intldoorclosers.com Index PIVOTS Pivots... 1,2 JacksonSomacaCRL Pivot Crossover
More informationDO NOT USE WITH CROSSBAR SPREAD LESS THAN 24.
TM Please read all instructions carefully before assembly, installation and/or use of this product. DO NOT USE WITH CROSSBAR SPREAD LESS THAN 24. WARNING: Do not exceed the weight limit of your vehicle
More informationSKU Product Name Price American Underslung
Classic & Exotic Service, Inc. 2032 Heide, Troy MI 48084 USA Phone: 1.248.269.9414 E-mail: Parts@classicandexotic.com WWW: http://www.classicandexotic.com SKU Product Name Price American Underslung MISC-0359
More informationSection 7 HARDWARE. Table of Contents. Phone (650) Fax (650)
Section 7 HARDWARE Table of Contents Partitions... 7-2 - 7-3 Partition Hardware... 7-4 - 7-7 Safety Grab Bars...7-8, 7-9 Restroom Accessories...7-8, 7-9 Tub and Shower Hardware... 7-10 - 7-11 Bathroom
More informationW & A PARTS MANUAL STACKER TOOL BAR TOP LEVELING MODEL
W & A PARTS MANUAL STACKER TOOL BAR TOP LEVELING MODEL Model No. 1272 -- 12 @ 38 Row - Bedder Model No. 1273 -- 12 @ 38 Row - Cultivator Model No. 1275 -- 12 @ 40 Row - Bedder SPECIALIZED FARM EQUIPMENT
More informationSection B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1
Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe
More informationPARTS LIST eforce Burnisher
PARTS LIST eforce Burnisher HEAD ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 6496721 MOTOR 36 VOLT, 2100 RPM, 3.6HP [see pages 16,17] 1 102 9121410 5/16 EXTERNAL STAR LOCK WASHER PACK OF 10 2 103 6492051
More informationBREADBOARD COMPONENTS
BREABOAR COMPONENTS IALS ial Clamp.... 2 rum ials.... 3-4 Flat ials.... 5 Engraved Flat isks.............................. 6 Flat ial Index.... 7 Engraved Index.... 8 KNURLE HANWHEELS.... 9-10 KNURLE HAN
More informationAssembly. Step 3. Attach the safety bracket (7) to the Pivot ARM (6).
Assembly Step 1. A. Stand the base of the machine by separating the U-frames (1,2). Pull the Front and Rear U-Frames (1,2) as far apart from each other as possible. Then push down on the middle of the
More information316 ALLOY MARINE GRADE STAINLESS STEEL
316 ALLOY MARINE GRADE STAINLESS STEEL CABLE RAILING KITS CROSSBAR ROD RAILING GLASS PANEL RAILING SWAGELESS FITTINGS King Metals has designed the new Meridian stainless steel line for style, function
More informationSouthco 64 Push-to-Close Latch Visible, Locking, Slide Bolt
Southco 64 Push-to-Close Latch, Locking, Slide olt 139.7 (5.50) 10.2 (.40) 108 (4.25) 4X Ø H RIVET LTCHES ONLY 22.6 (.89) Push-to-Close Latches 1.2 (.05) 45.1 (1.78) NON-LOCKING LOCKING* 23.4 (.92) TYPE
More informationCloset and Specialty Hardware
Closet and Specialty Hardware Door & Mirror Hardware...108 Magnetic and Bullet Catches... 108 Sliding Door Pulls........................................ 108 Mirror Clips/Glass Clips, Fittings and Latches...
More informationSECURITY HARDWARE. Security Hardware
Security Hardware Latch Lock Protectors... 16-2 Window Locks & Patio Door Locks... 16-2 to 16 s... 16-7 to 16-8 Door Viewer... 16-8 High Security Door Guard... 16-8 Lock Reinforcement Kit... 16-9 Super
More informationPARTS LIST WRANGLER 2730 DB & 3330 DB
PARTS LIST WRANGLER 2730 DB & 3330 DB WITH SIDEKICK CHEMICAL METERING WITHOUT SIDEKICK CHEMICAL METERING ORIGINAL INSTRUCTIONS RECOVERY TANK ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 3394411 TOP PLATE
More information/ Tool and Equipment Safety Tether System (T.E.S.T.S)
20 INSTRUCTIONS FOR USE AND PRODUCT GUIDE 799953 / 799955 Tool and Equipment Safety Tether System (T.E.S.T.S) Part # T353012 Rev 2 Reliance Industries LLC 2802 East X Street Deer Park, Texas 77536 281-930-800
More informationThe Contractor s Choice / America s Choice Corporate: (800) Fax: (201)
The Contractor s Choice / America s Choice Corporate: (800) 503-9805 Fax: (201) 964-9030 www.elgenmfg.com MISSION STATEMENT Striving to become the #1 single source solutions provider, serving sheet metal
More information3/8 X 1-7/8 Washer /8-16 Serrated Flange Nut
Mystic II Round Part # 420916-10 Round Packing List ITEM DESCRIPTION PART # 8 21 24 27 30 33 Carton # 1 Carton # 2 Carton # 3 8 x52 Gray Forest 1742 1 - - - - - - - - x52 Gray Forest 1743-1 - - - - - -
More informationMystic II Round. 3/8 X 1-7/8 Washer /8-16 Serrated Flange Nut
Mystic II Round Part # 420916-10 Round Packing List ITEM DESCRIPTION PART # 8 21 24 27 30 33 Carton # 1 Carton # 2 Carton # 3 8 x52 Gray Forest 1742 1 - - - - - - - - x52 Gray Forest 1743-1 - - - - - -
More information2016 PRODUCTS & PRICES
2016 PRODUCTS & PRICES LENGTH STOPS THAT ARE USER FRIENDLY Orders 1-800-821-3491 Phone 1-717-484-0230 Fax 1-717-484-0933 E-mail mayaposi@att.net Web mayaposi-stop.com MAYA POSITIONING EQUIPMENT MFG CO.
More informationLuxor Round. 3/8 Washer /8-16 Serrated Flange Nut
Luxor Round Part # 420929 Round Packing List ITEM DESCRIPTION PART # 8 21 24 27 30 33 Carton # 1 Carton # 2 Carton # 3 8 x52 Sand Jubilee 2214 1 - - - - - - - - x52 Sand Jubilee 22-1 - - - - - - - x52
More informationDUPLEX STRAINERS BULLETIN NO KECKLEY COMPANY 3400 Cleveland Street P.O. Box 67 Skokie, Illinois 60076
Distributed By: M&M Control Service, Inc. www.mmcontrol.com/keckley.php 800-876-006 847-6-066 BULLETIN NO. 9400- DUPLEX STRAINERS Shown with Optional Differential Pressure Indicator KECKLEY COMPANY 400
More informationSERVICE MANUAL- M126
SERVICE MANUAL- MANUAL CAN OPENER- MODEL # 2 1 Model #2 Can Opener Assembly Procedure The Model #2 can opener will be assembled according to the following procedure. I. Model #2 Handle and Arbor Assembly
More informationASSEMBLY GUIDE. Customer Service: INCH² 2-BURNER & 864 INCH² 2-BURNER
ASSEMBLY GUIDE 688 INCH² 2-BURNER & 864 INCH² 2-BURNER DANGER If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flames. 3. Open lid. 4. If odor continues, keep away from the appliance
More information9/16" deep socket Socket wrench (ratchet) 3/16" drill bit 5/8" spade bit Electric drill or power screwdriver Safety glasses
Subject: Flatwall Headwall System (P670E) Installation Instructions Introduction This procedure provides instructions for installing the Flatwall Headwall System (P670E). Before starting this procedure,
More informationSEMS FASTENERS PRODUCT GUIDE. Your added value solution provider. You ve probably flown with our fasteners. Engineered solutions
SEMS FASTENERS PRODUCT GUIDE Your added value solution provider You ve probably flown with our fasteners Elite suppliers to the Motorsport industry Engineered solutions Metric SEMS Product Type & Material
More informationPARTS LIST COLT COLT HEPA
PARTS LIST COLT 800-1250 - 1450 COLT HEPA - 1250-1450 MOTOR / LID ITEM PART NO. PART DESCRIPTION QTY. 101 0891201 TOP COVER 1 102 0294341 TOP MOTOR SEAL 1 103 0299861 STRAIN RELIEF CORD CLAMP 1 104 0891131
More informationAQUA PRODUCTS MODEL G. Cleaners B-17 ASSORTED AQUA PRODUCTS CLEANERS
Cleaners B-17 DESCRIPTIONS OF THESE ITEMS ARE ON THE NEXT 4 PAGES 99A MODEL G Cleaners B-18 Edited 2-7-06 1 3288-001 HANDLE ASSY. (Blue & White, Bracket included) - Aquabot, AB+RC, AB Turbo, AMAX Jr A10000B
More informationPlumbing Tools STRAIGHT SEAT WRENCH. Plumbing Tools. 4-PIECE RATCHET SEAT WRENCH SET Steel Construction. Pouch packed.
4-PIECE RATCHET SEAT WRENCH SET Pouch packed. STRAIGHT SEAT WRENCH Installation of Faucet Seats. 60124 5 50 15.75 RATCHET WRENCH Open Ends, 3/8 X 7/16 60103 Stepped ends 10 200 3.30 60102 Tapered ends
More informationWARDROBE FITTINGS Wardrobe Accessories P Clothes Hanger Accessories P Hangers & Shoe Racks P.
WARDROBE FITTINGS -1 Clothes Hanger Accessories P. 292-301 -2 Wardrobe Hooks P. 302-303 -3 Hangers & Shoe Racks P. 304-306 -4 Wardrobe Accessories P. 307 -1 Clothes Hanger Accessories Steel Round Closet
More informationHANDWHEELS.
HANDWHEELS 5 Handwheels Aluminum Angular Solid Handwheel...5.2 Aluminum Angular Spoked Handwheel... 5.2 Aluminum Finger Wheel... 5.10 Cast Angular Spoked Handwheel... 5.3 Cast Iron Angular Spoked Handwheel...
More informationRAFTER VI. Installation and Operation CAREFREE WITH AUTOMATIC AWNING SUPPORT. RV Accessory PRODUCT OVERVIEW
CAREFREE RAFTER VI RV Accessory WITH AUTOMATIC AWNING SUPPORT Installation and Operation PRODUCT OVERVIEW The gives the awning user the ability to easily tighten the center fabric when the awning is extended.
More informationManual Awning. Assembly Instructions. Product No Toll-free:
Manual Awning Product No. 088-30- Instructions Toll-free: -877-483-679 IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. 3 Table
More information1Perma-Shield Gliding Doors (PSI 1968 to 1978)
1Perma-Shield Gliding Doors (PSI 1968 to 1978) Parts Catalog Main Menu Section TOC Search What s in This Section 2-Panel, 3-Panel, and Sidelights...................................... Page 3 Parts Illustration...........................................................
More information1Perma-Shield Gliding Doors (PSI 1968 to 1978)
1Perma-Shield Gliding Doors (PSI 1968 to 1978) Parts Catalog Main Menu Section TOC Search What s in This Section 2-Panel, 3-Panel, and Sidelights...................................... Page 3 Parts Illustration...........................................................
More informationPARTS LIST EXTRACTOR ACCESSORIES
PARTS LIST EXTRACTOR ACCESSORIES 3 - JET WAND - 4097101 101 4097961 HANDLE ASSEMBLY - INCLUDES: 1 102 9121210 1/4-20 X 5/8 HEX BOLT 2 103 ---------- HANDLE CLAMP 1 104 9120920 1/4-20 HEX NUT 2 105 9120777
More informationThe safe & affordable install
QSLG1000 Quick-Sling SPECS QSLG1000 Each arm attaches to wood using 2 zip screws for stability & a 4 through bolt & wing nut for security. Installs to steel using steel beam adapters. 28 points of anti-vibration
More informationDUPLEX STRAINERS 800-KECKLEY ( ) BULLETIN NO / FAX: 847/ WEB SITE:
BULLETIN NO. 9400- DUPLEX STRAINERS 800-KECKLEY (800-2-9) 847/674-8422 FAX: 847/674-206 E-MAIL: SALES@KECKLEY.COM WEB SITE: WWW.KECKLEY.COM NO QUESTION. WE HAVE THE ANSWERS. Shown with Optional Differential
More informationSection B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1
Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe
More informationProduct Description of Klozit Sliding Glass Door Closing and Latching System
Product Description of Klozit Sliding Glass Door Closing and Latching System KLOZIT Door Closers: The Klozit sliding glass door closer is based upon a gas spring, similar to those found in car hatchbacks.
More informationHANDLES, LE VERS & CR ANKS
Handles, Levers & Cranks Plastic Pull/Lift Handle...112 Plastic Revolving Fold-Away Handle... 95 Plastic Revolving Heavy Duty Handle With Steel Shank... 92 Plastic Revolving Handle With Steel Through Shank...
More information