Ground Clamps Cable Tray
|
|
- Joanna Shelton
- 6 years ago
- Views:
Transcription
1 COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS AND SOLDERLESS CONNECTORS Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and conductor set screws. Tray-gripping serrations bite through insulating oxide on surface of aluminum tray. For 1 2 max. straight tray rail, or tray rail. Conductor size #6 to 250 MCM Clamp - extruded aluminum Screws - steel Clamp - tin plated Screws - zinc electroplated Options Stainless steel screws are available - add suffix SS CSA Standard: C22.2 No. 41 CSA Certified: For copper conductors only Tray Side Type CTGC Conductor Side Conductor Range AWG/kcmil Min. A B (2.00) 44.5 (1.75) CTGC-6-25A 362
2 Clamps Commodity Grade To ground a conductor to a driven ground rod. High strength cast bronze. Suitable for direct burial and wet locations. Cast bronze CSA Standard: C22.2 No. 41 CSA Certified: NEMA: FB-1 Type GRC COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS/SOLDERLESS CONNECTORS Rod Size Inches Screw Thread Size (UNC-2A) Min. Conductor Range AWG Height Width Across Open End Side Length 1/2 3/ (1.81) (0.81) (0.94) GRC-50-02B 5/8 3/ (1.88) (0.94) (0.63) GRC-62-02B 5/8 3/ / (1.94) (0.88) (1.00) GRC-62-10B 3/4 3/ / (2.19) (1.06) (1.13) GRC-75-10B 363
3 COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS AND SOLDERLESS CONNECTORS Clamps Universal Clamp System For connecting grounding conductors to cold water ground pipe in sizes through 12. Standard built-in ground wire connector for #8 Sol. through #2 Str. AWG wire. Cast Bronze clamps are suitable for direct burial and wet locations. s with suffix G - malleable iron s with suffix B - bolts and nuts - steel s with suffix B - cast bronze s with suffix G - Hot dip galvanized s with suffix B - bolts and nuts - silicon bronze CSA Standard: C22.2 No. 18 CSA Certified: Type G Type G with Type GWA Armor Wire Connector Built-in connector Pipe Type G with Type GH Hub Pipe Nominal Size Pipe Size Dimensions in Millimeters (Inches) O.D. Range Min. Thk. Width Height U-Bolt Malleable Iron Cast Bronze 1-1/4 1-1/ (1.66) 60.5 (2.38) 22.4 (0.88) 92.2 (3.63) (4.63) 7.9 (0.31) G-200G G-200B 2-1/ / (2.88) (4.00) 22.4 (0.88) (5.25) (6.44) 7.9 (0.31) G-350G G-350B 4 4 1/ (4.50) (5.56) 22.4 (0.88) (6.81) (8.00) 7.9 (0.31) G-500G G-500B (6.00) (7.10) 22.4 (0.88) (8.38) (9.56) 7.9 (0.31) G-600G G-600B (8.00) (9.30) 22.4 (0.88) (10.63) (11.81) 7.9 (0.31) G-800G G-800B (10.00) (11.40) 22.4 (0.88) (12.75) (13.94) 7.9 (0.31) G-1000G G-1000B (12.00) (13.50) 22.4 (0.88) (14.81) (16.00) 7.9 (0.31) G-1200G G-1200B 364
4 Clamps Universal Clamp System To provide flexible connection between ground hub and universal clamp. Copper CSA Standard: C22.2 No. 41 Type G Type GES-02 Existing Type GH COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS/SOLDERLESS CONNECTORS Type GES-02 between Hub and Clamp of Straps (Required) Mounting Centers Width. Strap Holes Thickness Wire Size (1.00) 8.6 (0.34) 1.5 (0.06) 2 AWG/kcmil (1.00) 8.6 (0.34) 1.5 (0.06) 2/0 AWG/kcmil (1.00) 8.6 (0.34) 1.5 (0.06) 3/0 AWG/kcmil (1.00) 8.6 (0.34) 1.5 (0.06) 250 AWG/kcmil GES
5 COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS AND SOLDERLESS CONNECTORS Clamps Universal Clamp Accessories NEC: For use with the universal ground clamps to connect grounding conductors run bare, in armor, or in conduit. Fits all basic ground clamp systems. Type GH-G - Malleable Iron, steel screws Type GH-B - cast bronze, brass screws Type GH-G - hot dip galvanized, steel screws - zinc electroplated NEC Certifications and Compliances UL Standard: 514A D Type GH-G Malleable Iron Hot Dip Galvanized C B A Type GH Type GH-B Cast Bronze Trade Size (Inches) Conductor Range AWG/kcmil Min. A B C D Malleable Iron Cast Bronze GROUND HUBS D 1/ (1.00) 38.1 (1.50) 35.1 (1.38) 9.7 (0.38) GH-50G GH-50B C B 3/4 4 2/ (1.25) 47.8 (1.88) 42.9 (1.69) 9.7 (0.38) GH-75G GH-75B (1.50) 54.1 (2.13) 55.6 (2.19) 9.7 (0.38) GH-100G GH-100B A 1-1/4 4/ (1.88) 63.5 (2.50) 68.3 (2.69) 9.7 (0.38) GH-125G GH-125B 366
6 Clamps Commodity Grade To ground a conductor to metallic pipe, tubing or ground rod. High strength cast copper alloy. Screws electroplated to resist corrosion. GC: Bare wire clamp from #10 solid to #3 stranded AWG. GCA: Armored cable or rigid conduit clamp from #8 solid to #4 stranded AWG. GCH: Rigid conduit clamp from #10 solid #4 stranded AWG. GCA and GC B are reversible for attachment to ground rods. Casting - copper alloy Screws - steel Copper alloy - natural finish Screws - zinc electroplated CSA Standard : C22.2 No. 41 CSA Certified: Nema: FB-1 Type GC B Type GC B COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS/SOLDERLESS CONNECTORS Type GCA B Conductor Range AWG Pipe Size Inches Min. Height Width Clamp Width 1/ (2.50) 58.7 (2.31) 17.5 (0.69) GC B 1-1/ (3.44) 92.2 (3.63) 20.6 (0.81) GC B 1/ (2.50) 60.5 (2.38) 17.5 (0.69) GCA B 367
Zinc Cable & Conduit Connectors For Armored Cable, Flexible Metal Conduit & Metal Clad Cable
Zinc Cable & Conduit Connectors For Armored Cable, Flexible Metal Conduit & Metal Clad Cable Type FC Set Screw To terminate regular wall steel or aluminum flexible conduit to a 1/2 knockout in a dry location
More informationCover, 1 Gang; Malleable Iron; Zinc Electroplated Dichromate Aluminum Polymer Enamel; Box Mounting; Appleton[R] Brand; FS Model; With Square Handle
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 K1VS 1G Mall WP SW Cover Appleton/Oz Gedney Catalog Number Manufacturer Weight per unit Product Category Features Device
More informationCABLE GRIPS CABLE GRIPS
STRAIN RELIEF Deluxe cord grips are woven of stainless steel mesh with an anodized aluminum body for corrosion resistance. They are offered in single/double weave construction to help absorb direct pull,
More informationI- 39. Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General Information and special features.
Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General nformation and special features. - 39 Seal out oil, water, dirt, dust and fumes wherever liquidtight flexible metal conduit
More informationFor thicker bars, longer bolts will be furnished upon request. For tin plating add suffix "-SN" to catalog number EX: GA13--SN GAA
TYPE GA, GAA Two onductor Flat ar Ground lamp A single or double bolt ground clamp for clamping two wires or cables to a flat bar,plate, or structural memeber. Permits a slight range of variablility in
More informationGrounding Clamp. Pins and Ball-Socket Clamps for Temporary Grounding
Grounding Clamp Pins and Ball-Socket Clamps for Temporary Grounding Pins and Ball-Socket Clamps have been designed to solve several temporary grounding situations, where the physical space or the contact
More informationPole Line Hardware. Catalog
Catalog Table of Contents Anchor Rods... 3 Expanding Anchors... 3 Pole Bands... 4 Adjustable Pole Bands... 4 Connecting Links... 4 Malleable Guy Clips... 4 Shackles... 5 Crossarms... 5 Steel Braces...
More informationSpecifications. According to CEC Rule Please Note
T& Fittings rmoured able and Flexible Metal onduit Fittings Specifications rmoured able (Type 90) Ref. E Rule 12-600 The anadian Electric ode 2012 Part I defines type armoured cable as, fabricated assembly
More informationCouplings for Gates Hoses 7 Combination Nipple
Supersedes 1 Long Shank Couplings for Gates Hoses 7 Combination Nipple Description: Cast brass, serrated shank, set has hex male and hex swivel female couplings, with a washer seal. Threads are GHT or
More informationHANDWHEELS.
HANDWHEELS 5 Handwheels Aluminum Angular Solid Handwheel...5.2 Aluminum Angular Spoked Handwheel... 5.2 Aluminum Finger Wheel... 5.10 Cast Angular Spoked Handwheel... 5.3 Cast Iron Angular Spoked Handwheel...
More informationA A A T E C H N O L O G Y
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. H A R D W A R E C A T A L O G TOTAL SOLUTION SERVICE For the Industrial Piping Marketplace 2011 www.aaatech.com 4 0 Y E A R S S E R V I N G I N D U S T
More informationMetal Clad Cable, Armored Cable and Flexible Metal Conduit Fittings
Metal lad able, rmored able and Flexible Metal Metal lad able, rmored able and Flexible Metal onduit rmored able (Type ) Ref. NE rticle 20 National Electrical ode defines type armored cable as, fabricated
More informationSTRAIGHT BLADE RECEPTACLES
STRAIHT BLADE RECEPTACLES ENERLITES INC. offers a full line of 15 A, 20 A, 30 A and 50 A Receptacles available in Residential rade, Commercial rade, and Industrial rade. ENERLITES Receptacles are precision-manufactured
More informationCOMMERCIAL AND INDUSTRIAL FITTINGS: CAST DEVICE BOXES. Applications. Illustrated Features
UNILETS for use with Threaded Rigid Conduit and IMC. All Device Boxes have Ridge Top Construction. Furnished with Internal Ground Screw. Applications Accommodate wiring devices such as switches and receptacles.
More informationStrut Clamp Pipe & Conduit
PRODUCT SPECIFICATIONS 0F Strut Clamp Pipe & Conduit Size: Steel pipe sizes 2" through 0" Finish: Electro-Galvanized Pipe clamps are designed to fit into the opening of 5 /8" wide channel profiles Pre-Assembled
More informationCATALOG FITTINGS CATALOG
CATALOG FITTINGS CATALOG AC/MC Cable Flex EMT Liquidtight A PART OF 2 AFC Fittings AFC FITTINGS CATALOG Since 1994 AFC Fittings has emerged as a leading supplier of high quality EMT, Flex and Liquidtight
More informationHANDLES, LE VERS & CR ANKS
Handles, Levers & Cranks Plastic Pull/Lift Handle...112 Plastic Revolving Fold-Away Handle... 95 Plastic Revolving Heavy Duty Handle With Steel Shank... 92 Plastic Revolving Handle With Steel Through Shank...
More informationInsulated Scissors. Handles made with shock-proof plastic. Length Blade Std. Part No. Type mm shape Pk.
Cutting Tools Cable Cutter - For copper and aluminum cables only. Extremely high cutting capacity with adjustable screw joint. for cable Length Std. Part No Type Ømm mm 2 AWG mm Pk. AP1017 N 15 50 1/0
More informationAXELENT WIRE TRAY Wire Trays, Fittings, Mountings and Accessories. Technical manual
AELENT WIRE TRAY Wire Trays, Fittings, Mountings and Accessories Technical manual ver. 02-2015 Article Page Article Page 1 Fitting 11 2 Fitting 11 3 Angled Fitting 11 4 Fitting 11 5 Joining Fitting 11
More informationFish Tapes & Conduit Tools
F o r P Fish Tapes & Conduit Tools r o f e s s i o n a l s. Working with conduit can be a difficult task, especially if you are not well-equipped to tackle the job. Klein s entire line of conduit tools
More informationSolutions for Original Equipment Manufacturers (OEM) Connecting Power to Your World TM
Solutions for Original Equipment Manufacturers (OEM) Connecting Power to Your World TM The Right Fit At BURNDY, we pride ourselves on developing solutions. In fact, we thrive on challenge. When our customers
More informationFERRULES & TOOLS Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)
TerminalBlocks_072012(alt-2).QD_Blocks 10/23/12 9:05 AM Page 117 To help you do the best job possible when using Altech s terminal blocks, we put together a selection of useful tools to accomplish just
More informationSmallest Connector with Removable Contacts
1 Ultra-Miniature 8STA Size 01 Connectors Smallest Connector with Removable Contacts Ultra compact design and very lightweight connector dedicated to the harshest of motorsport environments. Innovative
More informationAutomated Tiki Torch Installation Instructions
Automated Tiki Torch Installation Instructions Automated Tiki Torch with Poles (Exploded View) 14 Automated Tiki Head 6 8 Tiki Pole (Powder Coated Aluminum or Faux Bamboo Pole) 18 Base Pole (Powder Coated
More informationInsulated Tools. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P Insulated Tools r o f e s s i o Klein insulated tools maintain the highest level of quality Klein is known for, and they offer added protection against shock from energized sources with voltage
More informationEdward W. Daniel, LLC
Edward W. Daniel, LLC Manufacturers of Diamond D Hardware Since 1921 Manufacturing Warehousing & Distribution Packaging Edward W. Daniel, LLC Manufacturers of Diamond D Hardware Since 1921 About EWD Capabilities...
More informationRigid Conduit AMERICAN FITTINGS. When It Comes Your Electrical Fittings, Trust One Name, AMERICAN. Corporation. Alloy Steel Electrical Fittings
When It Comes Your Electrical Fittings, Trust One Name, AMERICAN. Industrial Specification Grade Fittings Rigid Conduit Alloy Steel Electrical Fittings Made in the USA WaterTIGHT Alloy Steel Ground Hub
More informationD. S. HULL COMPANY, INC
Perko Flush Ring Pull Chrome plated zinc. Order No Mfg No O.D. List 340427 1232DP1CHR 1-5/8 $15.78 340434 1232DP2CHR 2 $18.38 Perko Flush Lifting Handle Chrome plated brass. Screw size: #8. Note: 776DP2
More informationAviation Snips. Multi-Cable Cutter
CUTTING tools Aviation Snips 0653-01L Drop-forged, chrome-moly steel blades with serrated edges. Includes left, right and straight-cut versions with color coded grips green (right), yellow (straight),
More informationStrain Relief Q-1 Q-8 Support Grips Q-9 Q-28 Pulling Grips Q-29 Q-35
Wire Mesh Grips Q Strain Relief Q-1 Q-8 Support Grips Q-9 Q-28 Pulling Grips Q-29 Q-35 Wire mesh grips are true industry workhorses, suited to a wide variety of industrial, and OEM applications and the
More informationAmphenol RF Interconnects TNC 31 Series Threaded Lock RF Connector System Materials
TNC 31 Series Threaded Lock RF Connector System Materials Body/Finish Contacts Centre MALE Centre FEMALE Insulator Gasket Crimp Ferrules* *Metal finishes Durability Brass/Nickel Brass/Gold Plated (Au)
More informationTOOLING COMPONENTS. tel fax Clamping Kits Step Blocks...7. Driver Studs...
Clamping Kits... 2-8 Step Blocks...7 Driver Studs... 9-13 Bolts, Screws... 14-20 Nuts, Washers... 21-29 Sex Bolts... 30-31 Clamps... 32-44 Screws... 45-49 Knobs & Levers... 49-53 Rest Pads...54 Index Plungers...
More informationElectrician's Insulated Tools
Klein insulated tools combine excellent functionality along with reduction of risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts. ~ Electrician's FORGED
More informationEmergency Stop Devices
New! Selection and Application of.. 278 Emergency Stop Rope Pull Switches........... 279 New! Emergency Stop Push Buttons............... 293 Banner Engineering Corp. Minneapolis, MN U.S.A. bannerengineering.com
More informationLOOK. CP Test Stations! Your Key to Corrosion Monitoring & Utility Locating. P.O. Box 311 Kearny, N.J
CP_Monitoring_0912AB_Layout 1 9/10/12 5:50 PM Page 1 P.O. Box 311 Kearny, N.J. 07032 201.998.1500 www.cptestproducts.com Your Key to Corrosion Monitoring & Utility Locating LOOK CP Test Stations! CP_Monitoring_0912AB_Layout
More informationFlextray - F.A.S.T. Underfloor System
The is an innovative and flexible way to support and manage cables in raised floor applications. This Foldable, Adjustable, Stackable, Tool-less System uses Flextray, stands, and accessories to provide
More informationSECTION 5. Hardware and Optional Accessories for Steel Doors:
SECTION 5 Hardware and Optional Accessories for Steel Doors: Yale Grade 2 Cylindrical Lock Yale Grade 1 Cylindrical Lock Yale Mortise Lock Standard Duty Exit Device Heavy Duty Exit Device Standard Duty
More informationPN 3000 Series Fail Closed Pneumatic Actuators
PN 3000 Series Fail Closed Pneumatic Description A of compact linear actuators having 5 diaphragm sizes for matching the requirements of 1/2" to 4" Spira-Trol valves at various differential pressures.
More information4-foot Economy Sign Post. 4-foot post is rated at 2 pounds per foot. 7-foot Economy Sign Post
Introduction: ComplianceSigns.com offers a variety of sign posts, sign mounting hardware, sign bases, mounting tape and more to mount your safety signs indoors or out. We offer three styles of sign posts,
More informationKnives, Cutters & Scrapers
Knives, Cutters & Scrapers - 261 - Utility Knives T23216 T232 T23218 Snap-Off Knives SK4 Steel blades Stores up to 3 replacement blades Blade sections snap off providing sharp cutting point Stainless steel
More informationRTA flexible conduits
[ PROTETION OF LES ] Products and systems RT flexible conduits For each application and environmental stress there is a corresponding polyamide, PV or metal-plastic flexible conduit solution, ideal for
More informationstyle vision & quarter turns quarter turns section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
quarter turns vision & style quarter turns INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 3 quarter turns No. 626-PK Patent Pending
More informationtttttt www.wealdelectronics.com This publication is issued to provide outline information only and unless specifically agreed to the contrary by WEALD ELECTRONICS LTD. in writing, is not to form part of
More informationSFC /SFCS
FLAME-PROOF EXPLOSION- PROTECTED FLEXIBLE CONDUIT (d2g4) Type Number System SFCS- Size Length (5:500mm, 7:700mm, 10:1000mm) Stainless Steel Coupling Part Description Used in the hazardous locations as
More informationTO ORDER CALL: OR FAX: GROUNDING. Custom Assemblies Available.
SETS & SUPPORT BAR 354 Plated Copper Bar REL-GSB Pole Mounted Cluster Ground Support Bar Custom Assemblies Available. Tested to ASTM F855 Grade 5 Continuous Current: 400 Amps Fault Current - 15 cycles:
More informationInsulated Tools S 9 R O T E CTI Y N
Insulated Tools Klein insulated tools maintain the highest level of quality Klein is known for, and they offer added protection against shock from energized sources with voltage up to 1000 volts. Insulated
More information43 Everts Avenue PO Box 2078 Glens Falls, NY
43 Everts Avenue PO Box 2078 Glens Falls, NY 12801 800-833-9598 info@henssgenhardware.com Call Today 1 800 833 9598 Numerical Index STOCK NO: PAGE STOCK NO: PAGE STOCK NO: PAGE 0 34 227B 16 822 26 1 34
More informationPN-3, PN-4 Powernode Enclosures
PN-3, PN-4 Powernode Enclosures Addendum to Site Preparation and Installation Manual Effective: March, 2001 200 2 031-103-C1-001 Rev. A 2001 031-103-C1-001 Rev. A March, 2001 2001 Alpha Technologies Introduction
More informationSIN GLE BOND HOSE CLAMPS
Sec. 24 YOKE ENDS & HOSE CLAMPS Zinc Fin ished Drop Forged Yoke Ends Ad just able Auveco T Dimensions In Inches Unit Part No. Tap Size A B C D E F G H K Pkg. 10737 1/4-28 2 7/16 7/16 1-1/4 9/32 5/8 1/4
More informationMASTER LOCK MASTER LOCK
PADLOCKS & ACCESSORIES Laminated 1-3/4" wide laminated steel body for superior strength hardened steel shackle for extra cut resistance 4-pin cylinder helps prevent picking dual locking levers provide
More informationFor draining expansion tanks, other liquid storage vessels.
Plumbing Specialties 26-100 & 26-300 SERIES COMPRESSION GAUGE COCKS For draining expansion tanks, other liquid storage vessels. 26-100: rated up to 125 psig 26-300: soft metal seat/stuffing box rated up
More informationLSC19 Lighting Cable Assemblies and Connectors
PowerFLEX Cable Assemblies PowerPARTS Wiring Devices ISO 9001:2008 LSC19 Lighting Cable Assemblies and Connectors PowerFLEX and PowerPARTS Introducing a new generation of Lex Products 19 pin, 6-circuit
More informationUNIVERSAL PARTS GLOBAL
STAINLESS HOSE CLAMPS WIDE Stainless Band (9/16 ) No spot welds Extra long take up Smooth edges Interlock construction which strengthens under tension to ensure maximum torque application Worm gear clamps
More informationTable and Furniture Base Fittings Furniture Feets
Aluminium base plate Material: Steel screw Finish: Screw galvanized Installation: With M8 screw Aluminium 14 634.50.465 Accessories Aluminium 634.50.460 Packing: 20 pcs. Aluminium 634.50.469 Packing: 20
More informationIberville. Commercial Grade Fittings. Table of Contents
Table of ontents Nonmetallic Sheathed able... D2 D4 rmoured able / Flexible onduit... D5 D9 Service Entrance able... D10 Nonmetallic Liquidtight onduit... D11 Liquidtight onduit...d12 D13 Flexible ord...d14
More informationSpecifications Rigid Metal Conduit/PVC Coated Rigid Metal Conduit
Specifications Rigid Metal Conduit/PVC Coated Rigid Metal Conduit T&B Conduit Fittings Rigid Metal Conduit Fittings Ref. CEC Rule 12-1000 Rigid Metal Conduit affords maximum mechanical protection to conductors
More informationPARTS LIST CHARGER 2022 ABLT
PARTS LIST CHARGER 2022 ABLT HEAD ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 5990731 SPRING CLIP PAD HOLDER SET INCLUDES: 1 101A 9120205 #8 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW PACK OF 3 3 102 9121490
More informationSECURITY HARDWARE. Security Hardware
Security Hardware Latch Lock Protectors... 16-2 Window Locks & Patio Door Locks... 16-2 to 16 s... 16-7 to 16-8 Door Viewer... 16-8 High Security Door Guard... 16-8 Lock Reinforcement Kit... 16-9 Super
More informationTM ENTERTAINMENT CABLE
TM ENTERTAINMENT CABLE Flexible. GenErgy was born from a wire and cable manufacturer with over a half a century of experience. The result is the most comprehensive and capable cable offering to the entertainment
More information2pcs/pack. Auto Loading Utility Knife. Electrician's Knife Carton Cutter Utility Folding Knife Utility Cutter
38 3 902-253 Utility Folding Knife 902-253 902-318 Utility Cutter 2 1 locks with 3 positions : 902-261(100pcs/pack) 902-317 Carton Cutter Carton cutter Scraper 2pcs/pack All metal made cutter and cover
More informationHAND TOOLS. From safe, insulated tools to screw-holding drivers, professional electricians, backed by a limited lifetime. Contents.
www.greenlee.com HAND TOOLS From safe, insulated tools to screw-holding drivers, hex keys and pliers, Greenlee Hand Tools are designed by professional electricians, backed by a limited lifetime warranty,
More informationRussellstoll. Electrical Interconnection Systems. Dura-Gard Nonmetallic Waterproof Connections. The Next Generation: Dura-Gard
Dura-Gard Washdown Duty, Chemical, Outdoor, Industrial and Marine Use Nonmetallic Plugs, Connectors Receptacles and Inlets 20, 30 and, Maximum 600 VAC/250 VDC The Next Generation: Dura-Gard Severe environments
More informationPARTS LIST EXTRACTOR ACCESSORIES
PARTS LIST EXTRACTOR ACCESSORIES 3 - JET WAND - 4097101 101 4097961 HANDLE ASSEMBLY - INCLUDES: 1 102 9121210 1/4-20 X 5/8 HEX BOLT 2 103 ---------- HANDLE CLAMP 1 104 9120920 1/4-20 HEX NUT 2 105 9120777
More informationWORKHOLDING COMPONENTS
Adjustable Clamp Heels... 274 Adjustable Clamp Rests...273 Adjustable Step Blocks...284 Assemblies, Spherical Flange...260 Bolts, Dovetail...258 Bolts, Swing... 241 Bolts, T...258 Bolts, T-Slot...257 Bolts,
More informationST100 1" Sealtight Straight Steel Connector
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 ST100 1" Sealtight Straight Steel onnector ppleton/oz Gedney atalog Number ST100 Manufacturer ppleton/oz Gedney Description
More informationWARDROBE FITTINGS Wardrobe Accessories P Clothes Hanger Accessories P Hangers & Shoe Racks P.
WARDROBE FITTINGS -1 Clothes Hanger Accessories P. 292-301 -2 Wardrobe Hooks P. 302-303 -3 Hangers & Shoe Racks P. 304-306 -4 Wardrobe Accessories P. 307 -1 Clothes Hanger Accessories Steel Round Closet
More informationCONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9
CONTENTS PAGE NUMBER Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5 Hoist Rings Center Pull 6 Side Pull 7 Socket Head Stripper Bolts Inch 8 Metric 9 Punch Holder Shanks 10 Roller Stock Guides 11
More informationOxford Round. Carton # 1. Carton # 2. Carton # 3 ITEM DESCRIPTION PART #
Oxford Round Part # 420833-11 Round Packing List ITEM DESCRIPTION PART # 8 21 24 27 30 33 Carton # 1 Carton # 2 Carton # 3 8 x52 Gray Pearl 130309 1 - - - - - - - - x52 Gray Pearl 130310-1 - - - - - -
More informationThe Contractor s Choice / America s Choice Corporate: (800) Fax: (201)
The Contractor s Choice / America s Choice Corporate: (800) 503-9805 Fax: (201) 964-9030 www.elgenmfg.com MISSION STATEMENT Striving to become the #1 single source solutions provider, serving sheet metal
More informationCustom brushes can be made to your specifications. Call for details!
Schaefer Tube es Section 10 Tube br Custom brushes can be made to your specifications. Call for details! Twisted Wire es The small symbols represent a cross section of a twisted brush. (2 wire) bristles
More informationThe safe & affordable install
QSLG1000 Quick-Sling SPECS QSLG1000 Each arm attaches to wood using 2 zip screws for stability & a 4 through bolt & wing nut for security. Installs to steel using steel beam adapters. 28 points of anti-vibration
More informationREUSABLE ALUMINUM SWIVEL FITTINGS REUSABLE ALUMINUM LIGHTWEIGHT CRIMP SWIVEL FITTINGS OTHER REUSABLE ALUMINUM FITTINGS SOCKETLESS HOSE
283 STAINLESS STEEL BRAIDED RACING HOSE Aeroquip Racing Hose is compatible with petroleum and synthetic lubricants and may be used in fuel, lube, coolant and air applications. Lightweight and flexible,
More informationCABLE CUTTING, STRIPPING AND CRIMPING TOOLS
Cutting 38-39 Stripping 39 0 - CBE CUTTING, STRIPPING ND CRIMPING TOOS Ergonomic handles Surface protection High precision Flexibility With ergonomic handles and a specially The pliers are made of excellent
More informationSUBMITTAL PACKAGE FLEXIBLE SPRINKLER DROP
SUBMITTAL PACKAGE FLEXIBLE SPRINKLER DROP BRAIDED CONNECTIONS...pg 2-6 UNBRAIDED CONNECTIONS...pg 7-9 INSTALLATION...pg 10 ACCESSORIES...pg 11 6/26/2018 BRAIDED CONNECTIONS ARGCO Flexible Sprinkler Drops
More informationInduction hardened cutting knives for long life. Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
Klein insulated tools combine excellent functionality along with reduction of risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts. Electrician's (EINS)
More informationAutomated Tiki Torch Installation Instructions
Automated Tiki Torch Installation Instructions Automated Tiki Torch with Poles (Exploded View) 14 Automated Tiki Head 6 8 Tiki Pole (Powder Coated Aluminum or Faux Bamboo Pole) 12 Base Pole (Powder Coated
More informationTool Sets. Tool Sets. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Some projects are more complex than others and require a variety of tools to be used. For this reason, Klein has tool kits to assist professionals with these demanding projects. s s i o
More informationSouthco 64 Push-to-Close Latch Visible, Locking, Slide Bolt
Southco 64 Push-to-Close Latch, Locking, Slide olt 139.7 (5.50) 10.2 (.40) 108 (4.25) 4X Ø H RIVET LTCHES ONLY 22.6 (.89) Push-to-Close Latches 1.2 (.05) 45.1 (1.78) NON-LOCKING LOCKING* 23.4 (.92) TYPE
More informationP3000 UNIVERSAL Clamp-On
IHI INSTRUCTION MANUAL Required Tools P3000 UNIVERSAL Clamp-On Wrench Allen Key P3001 65 ENDCAPS P3011 65 BLACK P300 7 ENDCAPS P301 7 WHITE P3003 ENDCAPS P3013 SILVER PART# DESCRIPTION ENDCAPS SIDE SUPPORTS
More informationAbout the Gripple. Features & Benefits. Gripple hangers are the versatile way to suspend static loads.
About the Gripple Features & Benefits Gripple hangers are the versatile way to suspend static loads. Their time saving qualities have been shown to reduce installation by up to 6 times compared to threaded
More information9/16" deep socket Socket wrench (ratchet) 3/16" drill bit 5/8" spade bit Electric drill or power screwdriver Safety glasses
Subject: Flatwall Headwall System (P670E) Installation Instructions Introduction This procedure provides instructions for installing the Flatwall Headwall System (P670E). Before starting this procedure,
More informationOur Energy, Your Power.
2 3 NGK NAGAKI NGK Web Strap Hoists NAGAKI SEIKI CO. LTD was established in April 1946. Designated by Osaka Gas Co., they began to manufacture pipe cutters while simultaneously establishing the engineering
More informationHardware Solutions Contents
Hardware Solutions Contents Front Retainers MS14108 Type Ruggedized Self-locking Front Retainers 21716 Ruggedized Self-locking Front Retainer 21953 Ruggedized Self-locking Front Retainer SLR1 Self-locking
More informationSPINNER RACK. Additional 50 pack of stock re-order cards available. Order Part # Master Carton Boxes lbs.
PAGES 82 THRU 84 ACCESSORIES SPINNER RACK SPINNER RACK BATTERY ACCESSORIES & ELECTRICAL CENTER One stop display for your battery accessories and electrical wire needs. Keep a complete line of products
More informationPARTS LIST MODEL M-1 - PIG
PARTS LIST MODEL M-1 - PIG FAN HOUSING ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 1090601 LABEL KIT - M-1 PIG 1 102 2590019 SWIVEL COUPLING ASSEMBLY - INCLUDES: 1 102A 2590111 HOSE COUPLING GASKET 1 103
More informationHANDLES LHF115, LHR115, LHPB VARIOUS. Base Model Handles. MATERIAL Steel. FINISH Chrome Plated LHR115-1A
94 93 Base Model Handles LHF115, LHR115, LHPB VARIOUS LHR115-1A Front fixing A = 44.5mm Rear fixing A = 38mm A Padlockable Brackets 95 Base Model Handles THF100, THR100 VARIOUS Front fixing A = 44.5mm
More informationApplication A liquidtight fitting to secure flexible cord or power cable to a box or enclosure and provide strain relief. Standard Material/Finish
T& onduit Fittings Flexible ord and able Fittings The Ranger Series Liquidtight Strain Relief Fittings The only fitting to take a.250 inch cable range. New materials and computer aided designs helped T&
More information10 A at 100 to 240 VAC. G3NE-220T-US (20 A at 75 to 264 VAC) 5 A at 100 to 240 VAC
Solid State Relays G3NE Compact, Low-cost, SSR Switching 5to20 A Wide load voltage range: 75 to 264 VAC. Dedicated, compact aluminum PCB and power elements used. Built-in varistor effectively absorbs external
More informationWIDESPREAD LAVATORY MODELS WITH HI-ARC SPOUT
5951, 5961, 5981, 5983, 5993 SERIES MT122B INSTALLATION INSTRUCTIONS THESE INSTRUCTIONS MUST BE LEFT WITH HOMEOWNER WIDESPREAD LAVATORY MODELS WITH HI-ARC TRADITIONAL CROSS NOTE: Handle Inserts are not
More informationDesign Standards. Utility Manhole Covers
Design Standards Utility Manhole Covers Texas A&M University in College Station has standardized utility manhole covers to be used for all underground utility access on campus. All new utility manhole
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationDesign Standard. Utility Manhole Covers
Design Standard Texas A&M University in College Station has standardized utility manhole covers to be used for all underground utility access on campus. Until further notice, manhole covers manufactured
More informationPrimary Cable. Wire and Cable. XX = Color Coded Description, 00 = Units of Measurement, Call for Current Pricing
SUBHEAD PRIMARY CABLE Primary Cable Under 6AWG meets UL 1015-1230 Over 6 AWG meets UL 1426 & BC-5W2 221 F (105 C) dry and 167 F(75 C) wet 600 volt rating Class K 30 gauge tinned copper conductors BK =
More informationBERNSTEIN TOOLS FOR ELECTRONIC
BERNSTEIN TOOLS FOR ELECTRONIC Bernstein Tools pliers, safety tool, sets and suitcases Safety Pliers Safety Wrenches Safety Tools Content Tools Sets and suitcases... 4 Safety insulated pliers... 12 Safety
More informationFS and FD Cast Device Boxes. Description
FS and FD Cast Device oxes -1 FS/FD Single Gang FS/FD Two Gang FS/FD Three Gang FD Three Gang FD Two Gang FDH Four Gang Page Description 2,8 Features: oxes and Covers 3,4,5 Single Gang Cast-Hub Device
More informationProfessional Insulated Tools. Supporting Arc Flash Protection. from. Innovations that work. 10,000 Volt Tested 1000 Volt Rated
Professional Insulated Tools Supporting Arc Flash Protection from Innovations that work 10,000 Volt Tested 1000 Volt Rated 2 Arc Flash Protection: Wiha Insulated tools can be a vital component in your
More informationIB 7/40 Classic. Automatic residual ice discharge. Outstanding mobility. Efficient airflow in the device. Clear display
IB 7/40 Classic Thanks to airflow optimisations, our Ice Blaster IB 7/40 impresses with excellent results during dry ice cleaning, even when working with low air pressures. Compact device. 1 Automatic
More informationLimit Switches. 6.2 E47 Precision Switches
Limit Switches E47BMS02 E47BMS11 E47BMS40.2 Product Description............................................. 2 Approvals..................................................... 2 Features and Benefits...........................................
More informationContact Reliable Equipment for more ground clamps, accessories, and related products.
Proper selection of each part of a grounding set is important in filling the requirements of your application. 1. CLAMPS Clamp Design (C Type, Duck Bill, Flat, or Bus) Clamp Size. (Min. & Max. Capacity)
More informationT&B Fittings. Industrial Fittings. Liquidtight Flexible Nonmetallic Conduit Fittings. Specifications Type A Conduit Fittings
T& Fittings Liquidtight Flexible Nonmetallic onduit Fittings Specifications Type onduit Fittings Series 6302 Liquidtight Flexible Nonmetallic onduit Fittings pplication To provide a liquidtight, dustight
More information