ystem od-latch S R 04.1

Transcription

1 04.1

2 Overview Rod Latch System Product System Version/Product Line Material Page Cutout for Swinghandle FS PrB zinc die, chrome plated or black coated Rod Latch RS/FS PrA zinc die, untreated or PA, black Handle FS PrA / zinc die Handle FS PrA Rod Latch FS PrC zinc die, matt nickel plated 04.7 zinc die, untreated / steel, zinc plated or Rod Latch RS PrB Rod Latch FS PrC Add-on Escutcheon to PrB and PrC zinc die, untreated / steel, zinc plated or zinc die, untreated / steel, zinc plated Cutout-cover Pr A Handle FS PrC / zinc die, untreated

3 Overview Rod Latch System Product System Version/Product Line Material Page NEW Eject and Turn T-Handle FS Security tested zinc die, black Swinghandle FS PrC zinc die, black or chrome plated or PA grey Swinghandle FS PrC zinc die, black Swinghandle FS PrC Swinghandle FS PrC Flat rod FS steel, zinc plated Flat rod FS with ramp shoe steel, zinc plated Cams steel, zinc plated Rod Latch FS PrA zinc die Rod Latch FS PrC zinc die Swinghandle FS OFFSET-DUO

4 Overview Rod Latch System Product System Version/Product Line Material Page Rods and Accessories FS steel, zinc plated Accessories for flat rods FS steel, zinc plated stainless steel NEW Rod Guide FS PA NEW Dual Hook FS PA

5 3 010 Cutout for Rod-Latch system The can be supplied for different cutouts. All designs conform to international standards for switchgear cabinets and are based on multiples of 25mm/ Please refer to the relevant pages of the catalog for more information. 04.5

6 3 110 Handle for Rod-Latch FS PrA Wing, T- and L-Handles for application with see page Detailed dimensions of the cutout PrA see page All lockable handles are supplied with 2 keys. Screws and washers are included. Wing handle, T Handle and L Handle: / zinc die, naturale b) Grounding/Earthing clip: stainless steel AISI 304 Version Wing Handle T Handle L Handle see page non locking keyed alike DIRAK 1333* ** keyed alike DS200* ** keyed different/mixed ** Please order separately: a) O ring for IP b) Grounding/Earthing clip: * with stainless dust shutter ** IP65 not possible 04.6

7 3 112 Handle for Rod-Latch FS PrA SOFTLINE T-Handles for application with Rod- Latch System see page Cutout version PrA see page 04.5 T Handle: zinc die, matt nickel plated Other surfaces e.g. chrome plated, black on request! T Handle non locking T Handle alike DIRAK T Handle keyed different/mixed Please order separately: O Ring for IP

8 3 135 Add on Escucheon to PrB and PrC PrB and PrC Escutcheon for inserts and extension for cutouts B and C with Rod-Latch Systems see page 03.4, 03.6, 04.12, 04.24, 04.15, and Cutout versions B and C 50x25mm see page 04.5 This escutcheon consists of two parts: a short upper part and a lower clip-in cover extension. The short upper part is installed into the upper cutout as shown on page fastened to the Rod-Latch. The lower extension can then be slipped underneath the fitted upper part and can be clipped in into the lower cutout. a) b) and c) Escutcheon: d) Insert: zinc die, chrome plated e) Grounding/Earthing clip: stainless steel AISI 304 f) O Ring: NBR, black Version Part No. see page Escutcheon 2 screws and 1 O Ring are included Please order separately: b) Add on escutcheon long, for cutout version C c) Add on escutcheon short, for cutout version B d) Insert e) Grounding/Earthing clip: f) O Ring for extention Cover for cutout

9 3 136 Cutout cover PrA Cover for cutout PrA, PrB, and PrC Adding additional snap-in extensions b) and c), this Rubber plug can also be applied for cutouts type B and C (page 04.5) Seal to IP65 by additional O-Ring. For sheet thicknesses from 1.5 to 3mm. Cutout cover and escutcheon: O Rings: NBR, black for Cutout Part No. a) Cover PrA b) Add on escutcheon short, for cutout version B PrB (75) c) Add on escutcheon long, for cutout version C PrC (100) d) O Ring for extention

10 c Rod Latch RS/FS PrA to control round or flat rods. RH or LH application through double symmetry By rotating the latch over,the direction of opening changes. Detailed dimensions of the cutout PrA see page Standard stroke 24. a) to a3) Rods: steel, zinc plated Pinion: steel Housing: zinc die, natural or b) Insert: zinc die, chrome plated c) and c1) Escutcheon: d) Cam: zinc die, natural f) Grounding/Earthing clip: stainless steel AISI 304 Version Housing, zinc die Housing PA black see page a) Rod latch stroke 24, RH/LH, a1) as b), stroke 31.4, RH/LH, a2) Rod Latch without rods (only stop) a3) Rod Latch with one rod Please order separately: b) Insert with anti vibration device and special screw M6x10 Square 6mm Square 7mm Square 8mm Triangular 6,5 CNOMO Typ Triangular 7mm Triangular 8mm Double bit 3 reinforced version, pin AISI Double bit 3 complete zinc die Double bit Daimler Benz type Square female socket 6mm Crescent Czech c) Escutcheon with 2 screws for square / triangular and Daimler Benz Escutcheon c1) Escutcheon SOFTLINE 2 screws and 1 O Ring are included Handles 04.6 Cover for cutout 04.9 d) Cam with screw M6x16 A = 25, L = Cam with screw A = 20, L = Cam with screw A = 18, L = Cam with screw A = 30, L = Other dimensions on request or e) Flat rod 04.27, e1) Round rod 02.75, 02.76, f) Grounding/Earthing clip: Water and dust tight according to IP65 EN 60529: g) O Ring for insert h) O Ring for escutcheon

11 3 100 Rod Latch RS/FS PrA 04.11

12 3 070 Swinghandle FS PrB TRIMLINE Swinghandle TRIMLINE for Rod Latch and Flat Rods. RH or LH application. Water- and dust-tight according to IP65 DIN EN Version for 3-point cam see page Detailed dimensions of the cutout PrB see page a), a1), a2) and a3) Swinghandle: zinc die, chrome plated or black coated Dish: zinc die, black or chrome plated or PA black a2) Padlock eye: stainless steel b), b1) and b2) Swinghandle: zinc die, chrome plated or black coated Dish: zinc die, black or chrome plated or PA black b2) Padlock eye: stainless steel c) Insert: zinc die, chrome plated e) and e1) Rod Latch: zinc die f) Cam: steel, zinc plated g) Flat rods: steel, zinc plated h) Rod Guide: h1) Rod Guide: zinc die i) Grounding/Earthing clip: stainless steel AISI

13 3 070 Swinghandle FS PrB TRIMLINE Swinghandle TRIMLINE with cylinder, IP65 zinc die, chrome plated zinc die, black Dish PA black Handle zinc die black keyed alike DIRAK 1333* keyed alike DS200* keyed different/mixed see page a1) Swinghandle TRIMLINE for insert IP a2) Swinghandle TRIMLINE for cylinder + padlock eye keyed alike DIRAK 1333* keyed different/mixed a3) Swinghandle TRIMLINE for inserts and padlock eye Inserts must be ordered separately, see c) Locking stub included in handle-assembly. b) Combined Swinghandles TRIMLINE with cylinder, IP65 zinc die, zinc die, PA dish: chrome plated black black zinc die, black zinc die, zinc die, handle/disc: chrome plated chrome plated keyed alike DIRAK 1333* keyed alike DS200* keyed different/mixed b1) Swinghandle TRIMLINE for insert, IP b2)swinghandle TRIMLINE for inserts and padlock eye Inserts must be ordered separately, see c) Locking stub included in handle-assembly. c) Insert d) Assembling of inserts Please order separately: e) Rod Latch RH/LH with round rod stubs e1) Rod Latch RH/LH with square quick-fit stubs f) Cam with screw 04.24, g) Flat rod 04.27, h) Rod Guide Please order 2 pcs. per rod h1) Rod Guide, two halves order 4 pcs. per rod i) Grounding/Earthing clip: * with stainless dust-shutter 04.13

14 Notes

15 Rod Latch RS PrB for Round Rods. Both Flat Rods of the Rod-Latch System have to be guided additionally. In this configuration both Round Rods have the same length. The 4 weldstuds for the Rod Guides are positioned exactly in the line with the center of the latch system. Detailed dimensions of the cutout PrB see page a) Rod Latch: zinc die, natural / steel, zinc plated b) Rod Guide: b1) Rod Guide: zinc die, black e) Round rods: steel, zinc plated / Version Part No. see page a) Rod Latch with round rod for cutout PrB b) Rod Guide Please order 2 pcs. per rod b1) Rod Guide Please order 4 pcs per rod c) Insert and escutcheon 04.8, d) Swinghandle e) Round Rods special lenght with rollers and eye L mm e1) Round rod with eye e2) Round rods with eye and chamfered end f) Rod guide f1) Rod guide

16 Swinghandle FS PrC SOFTLINE Swinghandle SOFTLINE for application with s. The Swinghandle can be locked with 40mm long Profile Cylinders (DIN 18252), cylinder or insert. For applications with rod-latch see page 04.24, 04.15, or This Swinghandle is available with two different sliding dustcovers, enabling the locking with modern Profile Cylinders having a protruding keybarrel part (refer to chart). For IP65 applications the lower part of the handle is fixed with a sealed cap. For non IP65 applications e.g. product system the lower part has a fastening hook page Detailed dimensions of the cutout PrC see page a), a1), b), b1), d), d1), e), e1) Swinghandle: Dish: Sliding cover: Swinghandle SOFTLINE for Profile Cylinder 40mm long, up to 2.5mm protruding Part No. key barrel part a) for installation with cap (IP65) b) dish with hook (IP65 not possible) see page Swinghandle SOFTLINE for Profile Cylinder 40mm long, with raised sliding cover for up to 5mm protruding keybarrel part a1) for installation with cap (IP65) b1) dish with hook (IP65 not possible) c) Profile Cylinder according DIN d)) Swinghandle SOFTLINE with fitted cylinder barrel with cap and seals (IP65) keyed alike DIRAK 1333* keyed alike DS200* keyed different/mixed d1) as d) but dish with hook (no IP65 rating) keyed alike DIRAK 1333* keyed alike DS200* keyed different/mixed Swinghandle SOFTLINE for insert e) for installation with cap (IP65) e1) dish with hook (IP65 not possible) f) Inserts must be ordered separately. Locking stub included in handle assembly g) Assembling of inserts Accessories 04.24, , * with stainless dust shutter 04.16

17 Swinghandle FS PrC SOFTLINE 04.17

18 3 150 Swinghandle FS PrC Swinghandle for Profile Cylinder to DIN 18252, with fitted cylinder barrel, combination lock or insert see page 04.24, 04.26, or For IP65 applications the lower part of the handle is fixed with a sealed cap. For non IP65 applications e.g. product system the lower part has a fastening hook page Detailed dimensions of the cutout PrC see page To e): The Swinghandles e) and e1) are suitable for 5 or 7 piston Profile Cylinders. Handle-set includes adapter, locking cam and fittings. a) to e1), f) and f1), h) and h1) Swinghandle: zinc die, chrome plated or black or or PA, grey RAL 7032 Dish: f2) and f3) Swinghandle: zinc die, black Dish: f4), g) to g3) Swinghandle: Dish: i) Insert: zinc die, chrome plated 04.18

19 3 150 Swinghandle FS PrC Swinghandle () for Profile Cylinder with dustcover without dustcover see page for installation with cap (IP65) a) for Profile Cylinder 40mm long a1) for Profile Cylinder 45mm long a2) for padlock device and Profile Cylinder a3) as a), but handle zinc die, black a4) as a1), but handle zinc die, black Swinghandle () dish with hook (no IP65rating) b) for Profile Cylinder 40mm long b1) for Profile Cylinder 45mm long b2)for padlock device b3)as b), but handle zinc die, black on request b4)as b1) but handle zinc die, black on request - c) Profile Cylinder according DIN Swinghandle KABA-version Ø22 d) PA black d1) PA, grey RAL ** ** Swinghandle Assa-, Abloy-, TrioVing-version e) e1), with reinforced dustcover handle zinc die, chrome plated without cover handle zinc die, black handle handle f) Swinghandle with cylinder and cap (IP65) without cover with cover without cover keyed alike DIRAK 1333* keyed alike DS200* keyed different/mixed f1) as f), but dish with hook keyed alike DIRAK 1333* keyed alike DS200* keyed different/mixed Swinghandle with combination lock f2) for installation with cap (IP65) f3) dish with hook f4) Swinghandle with cylinder and combination lock, for installation with cap (IP65) Override keyed alike DIRAK 1333* keyed alike but not DIRAK 1333* In case of order please state the required key number Swinghandle clip-in, handle closed g) for installation with cap (IP65) g1) dish with hook g2)for padlock device, with cap and seals (IP65) g3)for padlock device, dish with hook (no IP65 rating) Swinghandle for insert h) for installation with cap (IP65) h1) dish with hook i) Inserts must be ordered separately Locking stub is included in handle assembly. k) Assembling of inserts * with stainless dust-shutter ** Price and delivery time on request 04.19

20 3 151 Swinghandle FS PrC Swinghandle for Rod-Latch. Swinghandle for Profile Cylinder to DIN with applications see pages 04.24, 04.26, 04.29, Dish and handle: zinc die Suitable for profile cylinders 40mm with 45 locking cam. Water- and dust-tight according to IP65 DIN EN RH and LH application. Cutout 50x25mm version PrC see page 04.5 For further handle versions see page 04.18, please contact DIRAK. Dish and handle: zinc die, black coated Bearing plate: zinc die, natural Cover: zinc die, black coated Shaft: brass, natural Cap: PA6 30GF black Wave washer: spring steel Tapping screws: steel, zinc plated Countersunk screw: stainless steel Cap sealing and O Rings: NBR Version Part No. see page Swinghandle with Cap and external dustcover for Profile Cylinder 40mm Profil cylinder

21 3 153 Swinghandle FS PrC DESIGN - Swinghandle with colored clip-in round or oblong inserts. For applications with rod-latch see page 04.24, 04.15, 04.29, For IP65 applications the lower part of the handle is fixed with a sealed cap. For non IP65 applications e.g. product system the lower part has a fastening hook page Detailed dimensions of the cutout PrC see page a) a1), b) and b1) Swinghandle and dish: c) Inserts: PA d) Insert: Makrolon Swinghandle for round insert for oblong insert a) for installation with cap (IP65) b) dish with hook (IP65 not possible) a1) as a) with cylinder dustcover b1) as b) with cylinder dustcover c) Clip in insert available from stock: round long, plain black white Clip in insert,availability on request: round long, corrugated long, plain Color: red blue green yellow orange black mint purple white d) not drawn: transparent with internal recess for label 36x e) Assembling of inserts

22 Notes

23 3 140 Handle for Rod-Latch FS PrC Wing, T- and L-Handles for application with see page 04.24, 04.26, or Detailed dimensions of the handles see pages Detailed dimensions of the cutout PrC see page Wing handle, T Handle and L Handle: / zinc die, untreated b) Grounding/Earthing clip: stainless steel AISI 304 Version Wing Handle T Handle L Handle see page non locking keyed alike DIRAK 1333* ** keyed alike DS200* ** keyed different/mixed ** All lockable handles supplied with two keyes. Screws and washers are included. Please order separately: a) O Ring for escutcheon / please order 2 pcs per handle b) Grounding/Earthing clip: * with stainless dust shutter ** IP65 not possible

24 3 130 Rod Latch FS PrC for application within th sealed area. The latch can be combined with escutcheons, handles or Swinghandles. RH or LH application. Detailed dimensions of the cutout PrC see page a) and a1) Rods: steel, zinc plated Pinion: steel Housing: zinc die, natural / steel, zinc plated or b) Insert: zinc die, chrome plated c) and c1) Escutcheon: d) Cam: zinc die, natural f) Rod Guide: g) Grounding/Earthing clip: stainless steel AISI 304 Version Housing, zinc die Housing PA black see page a) Rod latch a1) Rod Latch with square quick fit stubs Please order separately: b) Insert with anti vibration device and special screw M6x10 Square 6mm Square 7mm Square 8mm Triangular 6,5 CNOMO Typ Triangular 7mm Triangular 8mm Double bit 3 reinforced version, pin AISI Double bit 3 complete zinc die Double bit 5mm Daimler Benz type Square female socket 6mm Crescent Czech FIAT type c) Escutcheon with 2 screws for square/triangular and Daimler Benz double bit for FIAT type c1) Escutcheon SOFTLINE 04.8 Cam with screw M6x16 A = 25, L = Cam with screw A = 20, L = Cam with screw A = 18, L = Cam with screw A = 30, L = Adapter with screw M6x20 for fitting cams e) Flat rods 04.27, f) Rod Guide Please order 2 pcs. per rod Grounding/Earthing clip: Water and dust tight according to IP65 EN 60529: O Ring for insert O Ring for escutcheon / please order 2 pcs Handles Swinghandle 04.19, 04.21,

25 3 130 Rod Latch FS PrC 04.25

26 Rod Latch RS PrC for Round Rods. Both Flat Rods of the Rod-Latch System have to be guided additionally. In this configuration both Round Rods have the same length. The 4 weldstuds for the Rod Guides are positioned exactly in the line with the center of the latch system. Detailed dimensions of the cutout PrC see page a) Rod Latch: zinc die, natural / steel, zinc plated b) Rod Guide: b1) Rod Guide: zinc die, black f) Round rods: steel, zinc plated / PA black Version Part No. see page a) Rod control for Round Rods for cutout version C b) Rod Guide Please order 2 pcs. per rod b1) Rod Guide, 2 halves, please order 4 pcs. per rod c) Insert and escutcheon 04.24, 04.8 d) Handles e) Swinghandle 04.18, f) Round rods L mm special lenth with rollers and eye f1) Round rod with eye f2) Round rod with eye and chamfered end g) Rod guide g1) Rod guide

27 3 160 Flat rod Flat Rods for other dimensions A on request. Version with ramp shoe see page a) Flat rod: steel, zinc plated Roller: b) Rod Guide: b1) Rod Guide: zinc die Version dimension A Part No. see page a) Flat Rod with rollers L in mm* (Minimum order quantity: 200 pcs.) L in mm* b) Rod Guide Please order 2 pcs. per rod b1) Rod Guide, two halves, please oder 4 pcs. per rod * Price and delivery time on request 04.27

28 3 161 Flat rod with ramp shoe Flat Rod with Ramp-Shoe This system is specially designed to make special length rods. The top of the Flat Rod requires a square 6.2mm or a round 7.5mm hole. The Ramp-Shoe is pushed on and snaps into the hole. Stainless steel version see page a) Flat rod: steel, zinc plated b) For Ramp Shoe. d) Rod Guide: d1) Rod Guide: zinc die, black Version Part No. see page a) Flat rod for Ramp Shoe pl in mm* a1) Flat Rods for self cutting. With hole 6,2mm pl in mm* Formula for calculation of the rod length pi = L X Order example for Flat Rods a1) with pi = 1000mm: b) Ramp Shoe for standard frame Bending A Maß X 18 / ,5 / / ,5 / / ,5 / b1) Ramp Shoe, specail version 23 / / Further Ramp Shoes for different bendings A on request. c) Assembling of Ramp Shoe Rod Guide, please order 2 pcs. per rod Rod Guide, two halves, please order 4 pcs. per rod * Price and delivery time on request 04.28

29 3 165 Rod Latch FS PrA pre-assembled and ready for installation. Please indicate: Bending A, dimensons A and B (door closed). This system is applied on the inside of the sealing area. The direction of opening can easily be changed from RH to LH and viceversa. The system can be applied for cutout version PrA 50x25mm. The minimal enclosure clearance for application with symmetrical door is 480mm/ Detailed dimensions of the cutouts see page Additional accessories see pages 04.10, 04.6, 04.24, 04.21, 04.38, Attention: Minimum Quantity 100 pcs. Rod Latch: zinc die, steel zinc plated Flat rod steel, zinc plated Version Part No. a) Rod latch L in mm b) Right angle terminal A A c) Rod guide Attention: Drawn is the situation door closed with hinges on LH side

30 3 170 Rod Latch FS PrC for mounting into flange of door, outside the sealed area. Very smooth sealing compression and latching is achieved by brass dual roller catches with large ramp. The dual rollers are mounted onto Flat Rods size 14x3mm (0.551x0.118). RH and LH application. The direction of opening, which depends on the type of handle / insert, can be changed by rotating the central Rod-Latch which has double symmetry. Detailed dimensions of the cutout PrC see page a) and a1) Rod Latch: zinc die Dual rollers: brass b) Insert: zinc die, chrome plated c) and c1) Escutcheon: d1) and d2) Dual Hook: zinc die e) Rod Guide: e1) Rod Guide: zinc die f) to f4) Swinghandle and dish: g) Grounding/Earthing clip: stainless steel AISI

31 3 170 Rod Latch FS PrC Rod Latch*, one piece complete with rods and dual rollers for door distance Number height dual rollers Th A A1 B B Rod-Latch* + Quick-fit rods with 2 rollers order 1 off order 2 off *for Rod-Latches with PA housing on request! see page Please order separately: b) Insert Handles c) Escutcheon with 2 screws for square/triangular and Daimler Benz double bit for FIAT type c1) Escutcheon SOFTLINE 04.8 d) Dual roller catch d1) Dual Roller catch with 8 or Ø10 threaded stubs, screws from inside d2)dual Roller catch countersunk 6 for screws from outside e) Rod Guide Please order 2 pcs. per rod Rod Guide, two halves, please order 4 pcs. per rod Swinghandle f) for Profile Cylinder 40mm long f1) as f) but with cylinder dustcap f2) for Profile Cylinder 45mm long f3) as f2) but with cylinder dustcap f4) for padlock device Additional swinghandles 04.19, Grounding/Earthing clip:

32 Notes

33 3 310 Swinghandle FS OFFSET-DUO-3 for extremely NARROW frame width Swinghandle system OFFSET-DUO-3 for extremely NARROW frame width can be used to control the Rod-Latch Systems see page The Swinghandle controls the rodslider, which is situated on the outer door-skin. At the very door-flange, outside the sealing area, this slider controls the latching rod-system. This now allows frame-widths of only 30mm. The symmetrical rods allow two-, three- or multi-point latching ( see page 04.34) Water- and dust-tight according to IP65 DIN EN Swinghandle and dish: PA6, black Cap sealing: NBR Locking slider: steel, zinc plated Swinghandle pinion: zinc die Version Part No. see page a) Swinghandle System RH (as drawn) a1) Swinghandle System LH

34 3 311 Rods and Accessories for OFFSET-DUO-3 Latching rods and accessoires for application with swinghandles OFFSET- DUO-3, see page We show a typical 3-point system for a RH door. All rods run exactly in line and the lower rod is starting from the doorcenter, exactly symmetrical to the (not shown) upper rod. As the fitting positions of the latching hooks are identical to those of the hinges, the door can be installed RH or LH just by rotating the door 180. Dependig on the installed Rod-Guides and hinges, a minimal frame widths of 30mm is possible. a) and b) Rods: steel, zinc plated c) Latching hook: zinc die d) and d1) Rod Guide: Part No. a) Central Controlling Rod per lock system order 1 off b) Extension rod for door height distance of hook see page per lock system order 2 off Th A Numbers of Latching hooks / c) Latching Hook d) Rod Guide NARROW for weld stud M Rod Guide NARROW for weld stud M e) Profile Cylinder, according DIN f) Rectangular Gasket

35 3 311 Rods and Accessories for OFFSET DUO

36 3 145 Eject and Turn T Handle with 90 rotation security tested Retractable T-Handle with 90 rotation to control flat rod closing systems in our 208-Series. The design and layout of the T-Handle in combination with the very narrow gap dimensions, make this handle tamperproof and in addition the low profile design prevents the handle to be used as climbing step / aid. The locking cylinder can not be forced inwards by axial foces. The retractable T-Handle is kept latched on 2 positions. The T-Handle can not be folded down if not in line with the housing. All possible locking devices or cylinders are located in a seperate locking device sub-assy. This sub-unit can be adapted for: Eurocylinders, KABA-cylinders, Key-cylinders, inserts. These with or without a padlock. In the open position, this locking device sub-unit can easily be removed or installed. The complete handle can be applied for closing systems inside or outside the sealed area. For RH and LH applications. Water- and dust-tight to IP65 according to EN The complete unit has a condensation- and rainwater drainage. Complies with security test to WKII DIN1630. On request, the locking unit can be operated electrically via a remote controlled servo-system: Please contact DIRAK. Dish, T Handle, Cover, Insert and Spacer zinc die, black matt coated or RAL 7032 Flat rod: St2 K40 Rod stub: Steel DIN EN SMnPb Padlock eye: stainless steel AISI 304 O Ring: NBR/Perbunan, black T Handle with Insert black coated see page for Profile Cylinder without padlock eye for Profile Cylinder with padlock eye for KABA without padlock eye for KABA with padlock eye RAL 7032 Prices and delivery time on request. Rods on request. Profile Cylinder

37 3 145 Eject and Turn T Handle with 90 rotation security tested 04.37

38 Notes

39 3 162 Cams: with adapter Cam with adapter suitable for latch systems DIRAK 208 see page 04.12, 04.10, 04.24, or Other dimensions on request. a) Cam: steel, zinc plated b) Adapter: zinc die, natural Please order separately: a) cam Size A in mm / inch Part No. Part No. a) cam 22 / / / / / / / / / / / / / / / / / / / / / Adapter with screw M6x20 for fitting cams

40 3 910 Accessories for flat rods to f) and g): Rod Guide and latching hook for OFFSET-DUO-3 see page a) Rod Guide: b) Detent washer: steel, zinc plated c) Grounding/Earthing clip: stainless steel AISI 301 d) and e) Dual Hook: zinc die, zinc plated f) Rod Guide: g) Latching hook: zinc die h1) Rod Guide: stainless steel AISI 316 h2) Rod Guide: zinc die, black Version Part No. see page a) Rod Guide for flat rods b) Anti vibration device is supplied with insert c) Grounding/Earthing clip: d) Dual roller catch, with threated stubs, screws from inside Please order separately: Serrated screw e) Dual roller catch, with countersunk for M6 for screws from outside f1) Rod Guide NARROW for weld stud M f2) Rod Guide for weld stud M6* FS for OFFSET DUO *hole dimension increases to 6.3 g) Latching Hook for OFFSET DUO h) Rod Guide (you need 2 halves per guide) h1) Version stainless steel h2)version zinc die

41 3 910 Accessories for flat rods 04.41

42 3-911 Rod Guide FS for quick fit Rod Guide for flat rods. Quick fit by clipping onto weld-studs. Quick, tool-less installation. Weld - stud max. M6x20mm (0.787). The Rod Guide is put over the weldstud and then slid into the thread. Endposition indicated by an audible "click". Visual check possible from the top. The installation and removal of the flat rod is even possible with the rodguides fittet already. Rod-Guide can be unscrewed or removed by spreading the 2 clips with a screwdriver. Rod Guide: PA Pull-off forces upon request. Part No. Rod Guide for flat rods for quick fit

43 3 912 Dual Hook FS Dual Hook Installation by countersunk screws M5. Zinc die version see page Dual Hook: PA Part No. Dual roller catch for Flat Rods Dual roller catch with threaded stubs,for Flat Rods Price and delivery time on request Other dimension see a) (Part No ) 04.43

44 Notes