markilux 990 the compact markilux cassette awning slender, practical, functional PATIO AND BALCONY AWNINGS safe timeless beautiful

Size: px

Start display at page:

Download "markilux 990 the compact markilux cassette awning slender, practical, functional PATIO AND BALCONY AWNINGS safe timeless beautiful"

Juliet Harris
5 years ago
Views:

1 PATIO AND BALCONY AWNINGS safe timeless beautiful rated to wind resistance class 2 (corresponds to Beaufort 5) the compact markilux cassette awning slender, practical, functional markilux

PATIO AND BALCONY AWNINGS side view with awning retracted, face fixture side view at a pitch of 35 side view

(optional) the pitch adjustment range goes from 5 to 35 in the case of face fixture and 5 to 70 in the case

tendon made of high-tech fibres for ideal power transference side view during extension: Lounge in the

Optional Accessories the compact markilux cassette awning slender, practical, functional appealing overall

special cassette shape surrounds the roller tube even when the awning is extended so lending an overall

highest stiffness and the best possible cover winding characteristics even at the largest widths folding

robustness and durability radio-controlled motor with radio remote control for ease of use hard-wired motor

2 PATIO AND BALCONY AWNINGS side view with awning retracted, face fixture side view at a pitch of 35 side view with awning retracted, top fixture folding arm with round, steel-link chain with wall sealing profile (optional) the pitch adjustment range goes from 5 to 35 in the case of face fixture and 5 to 70 in the case of top and eaves fixture (both measured to the horizontal) optional subject to a surcharge: markilux bionic tendon made of high-tech fibres for ideal power transference side view during extension: Lounge in the combination anthracite metallic with end caps in polished chrome Design Features Technical Specification Optional Accessories the compact markilux cassette awning slender, practical, functional appealing overall appearance thanks to the torque bar-free construction and especially compact cassette, 125 mm in height the special cassette shape surrounds the roller tube even when the awning is extended so lending an overall harmonious appearance created by renowned designers when the awning is closed the folding arms are protected behind the front profile front profile with integrated gutter and hidden water drainage spouts folding arms with perfected power transference by means of a round, steel-link chain the 85 mm roller tube ensures the highest stiffness and the best possible cover winding characteristics even at the largest widths folding arms with drop-forged, aluminium joint components and Teflon-coated bronze bushes, which provide superior robustness and durability radio-controlled motor with radio remote control for ease of use hard-wired motor operation (optionally with automatic weather controls) for straightforward and easy operation wall sealing profile to cover the gap between awning and wall in the case of manual operation ease of use is ensured with the springassisted gearbox awning available in non-standard RAL colours available with a valance 92 Special Features

PATIO AND BALCONY AWNINGS Lounge colours off-white

off-white textured finish 5233 01 02 03 04 05 stone grey

avanna brown textured finish 5229 avanna brown textured

metallic 5204 15 17 19 20 21 22 23 Colours may differ

3 PATIO AND BALCONY AWNINGS Lounge colours off-white textured finish 5233 with end cap in polished chrome off-white textured finish stone grey metallic 5215 stone grey metallic avanna brown textured finish 5229 avanna brown textured finish anthracite metallic 5204 anthracite metallic Colours may differ slightly from those depicted in both hue and finish. Lounge colours 93

4 PATIO AND BALCONY AWNINGS Dimensions and configuration options min dimensions in cm 2 please note the minimum widths! Covers Operation / Drive standard manual operation sunsilk snc servo-assisted operation hard-wired motor io radio controls radio-controlled motor (433 z) fabric range no. optional / sunvas perla optional / / sunsilk perla FR sunvas snc standard iscellaneous standard bionic tendon wall sealing profile light and wind sensor valance infra-red heater vibrabox / radio control light sensor Sunis WireFree optional 2) 2) up to a maximum awning pitch of 35 motor 2 manual operation no. of folding arms 94 Dimensions and configuration options awning width min. minimum widths projection

5 PATIO AND BALCONY AWNINGS Dimensions and tolerances width projection Additional information The width of the awning cover is always less than that of the awning housing tolerance + 5 / 5 mm ± 40 mm awning cover width awning width 250 mm awning cover length awning projection Frame colours traffic white RAL 90 metallic aluminium RAL 9006 grey brown, similar to RAL 8019 light ivory RAL 1015 anthracite metallic 5204 stone grey metallic 5215 off-white textured finish 5233 avanna brown textured finish 5229 non-standard powder-coated finish mm standard optional Pitch adjustment range: from 5 to 35 in the case of face fixture and 5 to 70 in the case of top and eaves fixture (both measured to the horizontal). Definition of projection: Please consult the section Technical Information. In the case of manual operation approximately winding handle revolutions can be assumed per metre of awning projection. It takes approximately 12 seconds per metre to extend the awning in the case of motor-driven units. This model is only available as a single unit. A radio-controlled motor in io technology is available (see Optional Accessories ) Colours similar to those in the RAL chart. Colours may differ slightly from those depicted in both hue and finish. Dimensions and tolerances / Frame colours / Additional information 95

6 PATIO AND BALCONY AWNINGS Fixtures, fittings and accessories face fixture bracket mm face fixture bracket 300 mm face fixture bracket 300 mm top fixture bracket mm eaves fixture bracket mm 270 eaves fixture bracket assembly 270 mm spreader plate A mm spreader plate B mm flat plate and angled bracket for eaves fixture machine finish additional spreader / backing plate for eaves fixture mm spacer plate face / top fixture mm N.B! max. stacking height 200 mm spacer plate face / top fixture mm stand-off bracket for face fixture bracket and cover plate for installation with spacer plates and stand-off brackets in the case of external insulation mm reducing bolt assembly 12 / SW mm in length reducing bolt assembly 10 / SW mm in length reducing bolt assembly / SW mm in length reducing bolt assembly / SW mm in length wall sealing profile available by the metre assembly example: see face fixture with wall sealing profile stand-off strip for wall sealing profile available by the metre assembly example: see face fixture with wall sealing profile angled profile for eaves fixture mm available by the metre, not pre-drilled machine finish please refer to the section Technical Information insert RAL colour code no 96 Fixtures, fittings and accessories

7 PATIO AND BALCONY AWNINGS Face fixture Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 The pull-out force refers to the vertical centre to centre measurement between the fixture points of 90 mm. If this measurement is reduced to the minimum, the pull-out force increases by % in the case of compression-proof substrates and by 19% in the case of non-compression-proof substrates. FB T BT B WA Compression-proof substrate [cm] awning width projection pull-out force per fixing point bracket quantity width no. of fixing points wall sealing profile Non compression-proof substrate [cm] [cm] FB [N] FB [N] T BT 2 mm 2 mm B , , ,5 WA Face fixture 97

8 PATIO AND BALCONY AWNINGS Face fixture with spreader plate A Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 Compression-proof substrate Non compression-proof substrate [cm] [cm] [cm] FB [N] FB [N] T BT 2 mm 2 mm BP 2 2 B The pull-out force refers to the vertical centre to centre measurement between the fixing points of 76 mm. In the case of spreader plates a washer conforming to DIN 9021 must be used. FB T BT BP B WA awning width projection pull-out force per fixing point bracket quantity width no. of spreader plates no. of fixing points wall sealing profile 252, WA ,5 26, Face fixture with spreader plate A

9 PATIO AND BALCONY AWNINGS 400 Face fixture with spreader plate B Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 25 Compression-proof substrate [cm] Non compression-proof substrate [cm] The pull-out force refers to the vertical centre to centre measurement between the fixing points of 350 mm. In the case of spreader plates a washer conforming to DIN 9021 must be used. FB T BT BP B [cm] FB [N] FB [N] T BT 2 mm 2 mm BP 2 2 B 8 8 awning width projection pull-out force per fixing point bracket quantity width no. of spreader plates no. of fixing points , Face fixture with spreader plate B 99

10 PATIO AND BALCONY AWNINGS Face fixture with stand-off brackets Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 Compression-proof substrate [cm] Non compression-proof substrate [cm] [cm] FB [N] FB [N] T BT mm mm D B 8 8 The pull-out force refers to the vertical centre to centre measurement between the fixing points of 120 mm. In the case of stand-off brackets a washer conforming to DIN 9021 must be used. FB T BT B D awning width projection pull-out force per fixing point bracket quantity width no. of fixing points no. of stand-off brackets stand-off brackets for face fixture brackets and A A-A min. 80 max ,50 A 100 Face fixture with stand-off brackets

11 PATIO AND BALCONY AWNINGS Top fixture Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 Compression-proof substrate [cm] Non compression-proof substrate [cm] [cm] FB [N] FB [N] T BT 2 mm 2 mm B 8 8 The pull-out force refers to the horizontal centre to centre measurement between the fixture points of 80 mm. FB T BT B awning width projection pull-out force per fixing point bracket quantity width no. of fixing points , , min 60cm At a pitch of more than 46 to the horizontal there must be an area accessible behind the awning at least 60 cm deep to allow manual operation. This limitation does not apply to motor-driven awnings Top fixture 101

12 50 PATIO AND BALCONY AWNINGS Eaves fixture Torque [Nm Newton metres] for the fixture bracket in the immediate vicinity of the arm, shear force [N Newton] per fixing point according to EN 13561, wind resistance class 2 Torque [cm] Shear force [cm] [cm] FB [N] FB [N] T 2 2 B 8 8 The shear force is calculated on the basis of 2 fixing points per bracket, because depending on the roof pitch it cannot be guaranteed that 4 fixing points per bracket can used. d T FS B awning width projection torque value for the bracket in the immediate vicinity of the arm no. of brackets shear force no. of fixing points min 60cm At a pitch of more than 46 to the horizontal there must be an area accessible behind the awning at least 60 cm deep to allow manual operation. This limitation does not apply to motor-driven awnings Eaves fixture

PATIO AND BALCONY AWNINGS Eaves fixture with additional spreader / backing plate Torque [Nm Newton metres] for the fixture bracket in the immediate vicinity of the arm, shear force [N Newton] per

13 PATIO AND BALCONY AWNINGS Eaves fixture with additional spreader / backing plate Torque [Nm Newton metres] for the fixture bracket in the immediate vicinity of the arm, shear force [N Newton] per fixing point according to EN 13561, wind resistance class 2 d T FS B Torque [cm] awning width projection torque value for the bracket in the immediate vicinity of the arm no. of brackets shear force no. of fixing points Shear force [cm] [cm] FB [N] FB [N] T 2 2 B 4 4 By using the additional spreader / backing plate, the shear force is reduced in comparison with conventional eaves fixture min 60cm At a pitch of more than 46 to the horizontal there must be an area accessible behind the awning at least 60 cm deep to allow manual operation. This limitation does not apply to motor-driven awnings Eaves fixture with additional spreader / backing plate 103

14 PATIO AND BALCONY AWNINGS Face fixture with manual operation 234, , , WA WA wall sealing profile 104 Face fixture with manual operation

15 PATIO AND BALCONY AWNINGS Bracket fixture range for awnings with 2 folding arms 5,30 5, B dimensions in cm 07 Face fixture Eaves fixture VB X max. 100 X max. 110 X awning width B bracket fixture range VB adjustment range, face fixture bracket X installation dimensions Bracket fixture range for awnings with 2 folding arms 105

16 PATIO AND BALCONY AWNINGS 106

markilux 930 swing The designer awning with unique pivoting mechanism PATIO AND BALCONY AWNINGS safe timeless beautiful

markilux 930 swing The designer awning with unique pivoting mechanism PATIO AND BALCONY AWNINGS safe timeless beautiful PATIO AND BALCONY AWNINGS safe timeless beautiful The designer awning with unique pivoting mechanism rated to wind resistance class 2 (corresponds to Beaufort 5) www.markilux.com markilux PATIO AND BALCONY