WINDOW TECHNOLOGY ORDER CATALOG SECTION Casement & Awning Windows Hardware

Transcription

1 WINDOW TECHNOLOGY ORDER CATALOG SECTION 0. Casement & Awning Windows Hardware

2

3 Table of Contents 0. Casement & Awning Windows Hardware Dyad Operator Dual Arm Operator Cover & Fold-in Handle Track and Brackets for Casement Operators Scissor Arm Operator and Track Snap-on Adjustable Casement Hinges Fixed Awning Hinges Single Point Locking Handles & Keepers Multipoint Locking Handle & Fixing Plate Multipoint Locking Bars & Half Reaching Wedge Guide Shims for Multipoint Locking Bars Keepers for Multipoint Locking Bars Snubbers Edition Information in this document can be modified without notice. 0..

4 Left/Right Hand Identification for Casement Window Hardware OUTSWING WINDOWS (VIEWED FROM OUTSIDE) LEFT HAND OPERATOR 6-C6-00-L-* (use cover kit type A) RIGHT HAND OPERATOR 6-C6-00-R-* (use cover kit type B) LEFT HAND OPERATOR 6-C6-00-L-* (use cover kit type B) RIGHT HAND OPERATOR 6-C6-00-R-* (use cover kit type A) HALF REACHING WEDGE (A) 9-C08-00-A-6 HALF REACHING WEDGE (B) 9-C08-00-B Information in this document can be modified without notice. Edition 05.05

5 Dyad and Dual Arm Operators with Removable Cover and Fold-in Handle Dyad Operator Operator for casement windows Tan 0 6-C6-00-L/R-0 L/R = Left-handed/Right-handed 6-C6-00-L/R-0 Base made of Zamak Tempered steel arms Powder coated arms and base Industry standard cutouts Certified AAMA Used with covers: - left-handed (L) use cover kit type B (6-C65-00-B-*) - right-handed (R) use cover kit type A (6-C65-00-A-*) 0 Dual Arm Operator Operator for casement windows Tan 0 6-C6-00-L/R-0 L/R = Left-handed/Right-handed 6-C6-00-L/R-0 Base made of Zamak Tempered steel arms Powder coated arms and base Industry standard cutouts Minimum frame width 5,mm ('') Certified AAMA Used with covers: - left-handed (L) use cover kit type A (6-C65-00-A-*) - right-handed (R) use cover kit type B (6-C65-00-B-*) Removable Cover & Fold-in Handle kit Description PU Part Number Kit type A 0 6-C65-00-A-* Kit type B 0 6-C65-00-B-* 7 = White, 7 = Blue White, = Ivory, = Sandstone C65-00-A/B-* Once the window closed, the handle folds and snaps into the cover Edition Information in this document can be modified without notice. 0..5

6 Track and Brackets for Casement Operators Track for Dual Arm Operator Track with slider guide Tan 9-C Made of steel Powder coated surface 9-C Stud Brackets 5mm bracket Tan 6-C607-5-L/R- 5mm bracket Tan 6-C67-00-L/R- L/R = Left-handed/Right-handed 6-C607-5-L/R- 6-C67-00-L/R- Made of steel Powder coated surface Snap-on pivot 90⁰ Bracket Bracket for casement operators Tan 6-C C Made of steel Powder coated surface Snap-on pivot 0..6 Information in this document can be modified without notice. Edition 05.05

7 Awning Operator with Removable Cover and Fold-in Handle Scissor Arm Operator Operator for awning windows Tan 0 6-C C Base made of Zamak Tempered steel arms Powder coated arms and base Industry standard cutouts Certified AAMA Used with cover kit type A (6-C65-00-A-*) 0 Removable Cover & Fold-in Handle kit Description PU Part Number Kit type A 0 6-C65-00-A-* 7 = White, 7 = Blue White, = Ivory, = Sandstone C65-00-A-* Once the window closed, the handle folds and snaps into the cover Track for Scissor Arm Operator Track with slider guides Tan 9-C Made of steel Powder coated surface Two slider guides included 9-C Edition Information in this document can be modified without notice. 0..7

8 Casement Hinges Snap-on 0'' & '' Adjustable Hinges Casement hinge arms ( pairs per box) Arms for 0'' hinge Arms for '' hinge Casement hinge tracks ( pairs per box) Track for 0'' hinge Track for '' hinge 6-C-0-P-8B 6-C--P-8B 6-C80-0-P-8B 6-C80--P-8B Snap-on adjustable hinge Stainless steel arms and tracks Solid brass adjustable pivot Nylon and stainless steel slide Stop point 90 Nylatron washer between arms Certified AAMA Adjustable with hexagonal mm (/") wrench We recommend the use of our screws for track installation Hexagonal Wrench mm (/'') wrench Zinc 9-C Used to adjust the adjustment hinges 9-C Hinge Track Screws #0 x 5/8'' (6mm) 0 9-C968-M C968-M-0-8 Stainless steel screws Undercut #7 head with Quadrex socket Sharp tip for quick drive Slim head for more clearance Special thread design for thin wall profile For hinge track installation 0..8 Information in this document can be modified without notice. Edition 05.05

9 Awning Hinges Fixed Hinges Awning hinges (5 pairs arms and 5 pairs track per box) 0'' hinge '' hinge 8'' hinge '' hinge 6'' hinge C7-0-P-8B 6-C7--P-8B 6-C7-8-P-8B 6-C7--P-8B 6-C7-6-P-8B Stainless steel arms and tracks Solid brass pivot Stainless steel pivot clip Nylon and stainless steel slide Nylatron washer between arms Certified AAMA We recommend the use of our screws for track installation 0 Fixed hinges Hinge Track Screws #0 x 5/8'' (6mm) 0 9-C968-M C968-M-0-8 Stainless steel screws Undercut #7 head with Quadrex socket Sharp tip for quick drive Slim head for more clearance Special thread design for thin wall profile For hinge track installation Edition Information in this document can be modified without notice. 0..9

10 Locking Handles and Single Point Keepers Single Point Locking Handle Locking handle with steel driving fork White Blue White Ivory Coppertone 6-C C C C C * Front view Case and handle made of Zamak, baked enamel finish Reversible left hand or right hand mm locking travel 80º Locking reach of mm (/") Use with steel keepers 9-C0 and 6-C0 Recommended screws 9-C (Bag of 00) Single Point Locking Handle Locking handle with opened stop points White Blue White 6-C C Nylon housing, Zamak lever Baked enamel finish Use with steel keepers 9-C0 and 6-C0 Recommended screws 9-C (Bag of 00) 6-C * Front view 9-C0-0 9-C0-0 6-C C C0-08 Single Point Keepers Description Height mm PU Part Number Keeper 9-C Keeper.5 9-C Keeper with nylon shim 5 6-C Keeper with nylon shim C Keeper 8 9-C Keeper with nylon shim C Keeper with nylon shim 6-C0--0- PU = Packaging Unit 6-C C0- Made of steel plated FerGUard Vertical adjustment mm Anti-slip fixing hole Use with locking handles 6-C * and 6-C * 0..0 Information in this document can be modified without notice. Edition 05.05

11 Locking Handle for Multipoint Locking Bars Multipoint Locking Handle Locking handle with nylon driving fork White Blue White Ivory Coppertone 6-C C C C C * Front view Case and handle made of Zamak, baked enamel finish Reversible left hand or right hand mm locking travel 80º Use with series 6-C700 multipoint locking bars Recommended screws 9-C (Bag of 00) 0 Fixing Bracket Fixing bracket for locking handles Aluminum 9-C Made of aluminum Use with locking handles: 6-C * 6-C * 9-C Long Screws #8 x /'' (mm) Zinc 00 9-C5-C-0-9-C5-C-0- #8 zinc plated steel screws with Wafer head Phillips socket For locking handle installation Edition Information in this document can be modified without notice. 0..

12 Multipoint Locking Bars Series 6-C700 Locking Bars with 8mm Cams Dim. (mm) Dim. (in) Locking Cam PU Part Number C * 900* 000* *Only available on special request C C C C C C C C C C C C C C C C C PU = Packaging Unit Made of stainless steel Reenforced nylon glides Use with keepers (Refer to keeper section) Use with 6-C * locking handle Adjustable cams (±mm) with Allen key mm Handle can be installed on first or second cam Reaching Wedge Half reaching wedge Black 9-C08-00-A/B-6 Made of nylon Used for series 6-C700 multi-point locking bars A = used for left hand operator (outside view) B = used for right hand operator (outside view) 9-C08-00-A/B-6 6-C700-XX Information in this document can be modified without notice. Edition 05.05

13 Guide Shims for Multipoint Locking Bars 0 9-C00-XX-0-7 Edition Information in this document can be modified without notice. 0..

14 Keepers for Multipoint Locking Bars Monobloc Keepers Base Pos. Height (C) mm Dim. (A) mm Dim. (B) mm PU Part Number C C C C C C C C C C-XX-0-7 B A POSITION 0 - BASE 0 B C C C C C C C C C C C C C C C C C A C C PU = Packaging Unit BASE mm BASE mm BASE mm BASE 5 mm POSITION POSITION POSITION Monobloc keeper Made of nylon Used for multipoint locking bars Can suit various profile systems POSITION POSITION 5 B A C BASE mm BASE mm BASE mm BASE 5 mm POSITION 6 POSITION 7,5 POSITION 8,5,0,0,5 0.. Information in this document can be modified without notice. Edition 05.05

15 Keepers for Multipoint Locking Bars Monobloc Keepers Description Height mm Color PU Part Number Monobloc keeper Made of nylon Used for multipoint locking bars Can suit various profile systems Keeper Description Keeper Height (mm) Color PU Part Number Made of nylon Used for multipoint locking bars Information in this document can be modified without notice.

16 Accessories Snubber Snubber Tan C C C * Made of painted steel or stainless steel Installs in the hinge cavity Used with E-56 flat head screws pieces are required for the assembly Snubber (exterior) Snubber White 0 9-C C Made of painted steel Installs from exterior or in the hinge cavity Used with E-56 flat head screws pieces are required for the assembly (option ) Adjustable Snubber Set of snubber Zinc 0 6-C C Made of steel Installs in the hinge cavity Used with E-56 flat head screws Adjustable for compression Wedge 0mm run-up block White 9-C C Made of nylon 0..6 Information in this document can be modified without notice. Edition 05.05

17 Accessories Screws for Hardware Fixing Description Dimension mm Color PU Part Number E-56-XX-0- D screws. x Zinc 0 E D screws. x 6 Zinc 0 E D screws. x 0 Zinc 0 E D screws. x Zinc 0 E D screws. x 5 Zinc 0 E D screws. x 0 Zinc 0 E D screws. x 5 Zinc 0 E D screws. x 0 Zinc 0 E Type D with self-drilling spiral point and high duplex thread Used for fastening fittings into semihard PVC at high speed Phillips socket 0 Edition Information in this document can be modified without notice. 0..7

18 QUÉBEC / MARITIMES Ferco Ferrures de Bâtiment Inc. 000, Rue Berlier Laval, QC H7L S Canada T F ferco@ferco.ca ONTARIO / WESTERN PROVINCES Ferco Architectural Hardware Inc. T F UNITED STATES Ferco Architectural Hardware Inc. T F Edition Printed in Canada