Service Station Equipment

Transcription

1 Service Station Equipment

2 Table of Contents Service Station Equipment Underground Storage Tank Equipment A0030/A0089 Fill Adapters 5-6 A0097 Fill Caps 7 A0076 Vapor Adapters 8 A0099 Vapor Caps 9 A0060 Emergency Shear Valves 10 A0063 Vapor Shear Valve 11 A1100 Overfill Prevention Valves/Assemblies A0020 Drop Tubes 16 A0070/A0088 Coaxial Drop Tubes 17 A0079 Extractor Fittings A0075/A0078 Ball Floats 20 A0066 Check Valve 21 A0750 Ball Valve 21 A0732 Underpump Union Check Valve 21 A0084 Pressure Vacuum Vents 22 A4103/A0785 Tank Vents 23 A0998 In-ground ID Markers 24 A0996 ID Tags 24 A0997 Tank ID Tags 24 Z0838 Sealants 25 Spill Containment Selection Chart Replaceable A1004 Single Wall Poly 30 A1005 Single Wall Stainless Steel 31 A1005 Below Grade 31 A1004 Double Wall Poly 32 A1005 Double Wall Stainless Steel 33 Non-Replaceable 34 A1004 Single Wall Poly 34 A1005 Single Wall Stainless Steel 34 Special Applications A1004 Multi-Purpose Access Manhole 35 A1005 For Tank Monitor 35 A1005 Remote Fill Retrofit Franklin Fueling 39 OPW OPW 500/700 Series Retrofit 42 Universal 43 Pomeco 44 Fairfield 44 Pemco 44 Emco Accessories 47 Spill Containment Accessories A0031 Riser Extensions 48 A7901 Pipe Nipples 49 Spill Containment Accessories, cont. A0028 Riser Lock 50 A0333 Hand Pump 50 Test Equipment and Tools Spill Containment Replacement Parts Manholes A0716 Composite Manholes A0717 Standard Round Manholes A0717 Square Manholes and Vaults A0721 Monitoring Well Manholes A0727/A0728 Well Protectors 68 Phase I EVR Caps and Adapters 70 A1004EVR Spill Containment A1100EVR Overfill Prevention 73 A0020EVR Drop Tubes 74 Installation and Maintenance Tools 74 Phase II EVR A4005EVR Balance Vapor Recovery Nozzle 76 A4119EVR Coaxial SafeBreak 77 Repair and Replacement Kits/Service Tools 78 Nozzles A4005/A4015 Balance Vapor Recovery 79 A0500 Splash Guards 81 Dispenser Accessories A2119/A3019 Standard Shear Pin SafeBreaks A2219/A3219 Standard Reconnectable SafeBreaks A4119EVR Coaxial SafeBreak A0360 Hose Swivels A4110EVR Coaxial Hose Swivel A4043/A4041 Coaxial Splitters Adapters A0010 Flow Regulators A0021 Standard Hose Assemblies A Dispenser Conversion Frames A E-Stop Switch Pedestal Competitor Cross Reference Numerical Index Warranty Policy

3 Service Station Layout Product Page 1 A4015 Balanced Nozzle 79 2 A4119 Coaxial SafeBreak 77 3 A Standard SafeBreak 82 4 A /4 Standard SafeBreak 81 5 A0021 Standard Hose 87 6 A0360 Swivel 84 7 A0063 Vapor Shear Valve 11 8 A0060 Emergency Valve 10 9 A0066 Multi-Purpose Check Valve A0750 Ball Valve A0717 Standard Manhole, Steel 62 or Composite (A0716) A0717 Standard Manhole 62 or Composite (A0716) A Fill Cap for Tank Probe 7 14 A1004 Double Wall Spill Container 32 Product Page 15 A0097 Tight Fill Cap 7 16 A0030 Fill Adapter, Fixed or Swivel 5 17 A1100 Overfill Prevention Valve A0028 Riser Lock A0031 Riser Extension A0099 Vapor Adapter Cap 9 21 A0076 Vapor Adapter, Fixed or Swivel 8 22 A1004 Double Wall Spill Container A0717 Standard Manhole A0585 Extractor Pipe Cap A0079 Extractor Assembly A0075 Ball Float A0721 Monitoring Well Manhole A0720 Monitoring Well Cap A0084 Pressure Vacuum Vent 22 2

4 NOT TO SCALE 3

5 4

6 UST EQUIPMENT

7

8 Fill Adapters A S Fill Swivel Adapter Material Body: Brass or Stainless Steel O-rings: Viton Gasket: Buna-N Viton is a registered trademark of DuPont Dow Elastomers Installed Height 5.5 The Emco Wheaton A S Swivel Adapter prevents accidental loosening of the adapter from the fill pipe by incorporating two set screws that are tightened after torquing the adapter. The A S is field serviceable using the kits below. Use with the A0097 Fill Cap. Use the Emco Wheaton A0081 Adapter Wrench for installation. Cam & Model No. Material Thread Size Groove Lbs. * A S Brass 4 Female A SS Stainless Steel 4 Female * Phase I EVR E.O. VR Gasket Replacement O-ring Replacement A0030 Fill Adapter Brass Stainless Steel Complies with EPA 40 CFR Part 63 Material Body: Aluminum or Brass Gasket: Buna-N B C Installed Height A The Emco Wheaton A0030 Adapter is designed for use with conventional dual point fill systems. Features recessed threads for easy installation and positive seating on riser pipes. Use with the A0097 Fill Cap. The A A and -024BA are notched for use with the A Adapter Clamp to comply with EPA 40 CFR Part 63 requirements. Cam & Model No. Material Thread Size Lugs Groove Lbs. A B C ** A Aluminum 4 Female NPSM No A Brass 4 Female NPSM Yes A A Aluminum 4 Female NPSM No * A BA Aluminum 4 Female BSPP Yes * Most common variant Gasket Replacement ** Phase I EVR E.O. VR-105 CARB E.O. G A ULC Listed MH27242 A0030 Tank Probe Adapter The Emco Wheaton A F Tank Probe Adapter is designed for use with the Franklin Fueling INCON Tank Probe. Includes the aluminum body, aluminum support washer and two rubber gaskets. INCON support plate not included. Cam & Outside Overall Install Model No. Material Thread Size Lugs Groove Lbs. Dia. Ht. Ht. A F Aluminum 4 Female NPSM No INCON Support Plate Support Washer 5

9 Fill Adapters A0089, A0096 Coaxial Fill Adapters Material Body: Aluminum 4.0 A Installed Height Emco Wheaton Coaxial Vapor Recovery Adapters are designed for standard coaxial fill systems and coaxial systems with self-sealing vapor lines. Features recessed threads for easy installation and positive seating on riser pipes. Use with the A0097 Fill Cap. Use Emco Wheaton A0081 Adapter Wrench for installation. The A0089 and A0096 are notched for use with the A Adapter Clamp to comply with EPA 40 CFR Part 63 requirements. 5.5 Model No. Use With Size A Lbs. A A0088 Self-sealing Coaxial Drop Tube 4 Female NPSC A A0070 Coaxial Drop Tube 4 Female NPSC A0032 Adapter Clamp Material Body: Aluminum 1.0 Installed Height The Emco Wheaton A Adapter Clamp installs on the riser pipe or pipe nipple. The A0032 is used with the following non-swivel adapters: A0089, A0096, A A, A BA and A The tabs are aligned with the notches on the adapter, and the three set screws are tightened to prevent the adapter from loosening in use, in compliance with EPA 40 CFR Part 63 requirements. Model No. Material Size Lbs. A Aluminum Installed on pipe nipple with A A Adapter A0033 Debris Collector The Emco Wheaton A Debris Collector attaches to the bottom of any fill adapter to prevent large debris from entering the underground storage tank. There are no restrictions during a fuel drop, and the center hole allows for fuel sampling. Material Rag Stopper: Stainless Steel Gasket: Nitrile Model No. Lbs. A Installed in A S Swivel Fill Adapter 6

10 Fill Caps A0097 Fill Cap Material Body: Aluminum Cams: Brass Links: Steel Seal: Buna-N Installed Height The Emco Wheaton A series Top Seal Fill Cap is designed for use on conventional A0030 or coaxial A0089 and A0096 Adapters. The cap is lockable and features a self-aligning, toggle-action design with center collar to prevent breakage; made of corrosion resistant aluminum. Cam & Model No. Groove Lbs. A CARB E.O. G A Approved under Phase I EVR Executive Order VR-105 Complies with EPA 40 CFR Part Replacement Gasket A LP Low Profile Fill Cap Material Body: Aluminum Lever: Ductile Iron Gasket: Buna-N Installed Height 6.9 The A LP Low Profile Fill Cap is designed for use when there is limited space between the top of the adapter and the spill containment lid. The cap is painted gray. Cam & Model No. Groove Lbs. A LP Approved under Phase I EVR Executive Order VR Replacement Gasket A Tank Gauge Cap Material Body: Aluminum Cams: Brass Links: Steel Seal: Buna-N Installed Height The A Tank Gauge Cap has the same features of the A Fill Cap and is designed with a grommet to allow a cable to pass through the cap. The A comes with two sizes of leak tight connector nut fittings: and Approved under Phase I EVR Executive Order VR-105 Model No. Cam & Groove Lbs. A For Tank Probe Replacement Gasket A A Includes A Tank Gauge Cap and A Adapter 7

11 Vapor Adapters A S Vapor Swivel Adapter Material Body: Brass or Stainless Steel O-rings: Viton Gasket: Buna-N Viton is a registered trademark of DuPont Dow Elastomers Installed Height The Emco Wheaton A S Vapor Swivel Adapter prevents accidental loosening of the adapter from the vapor pipe by incorporating two set screws that are tightened after torquing the adapter. The A S is field serviceable with o-ring kit p/n and gasket kit p/n Use with the A Vapor Cap. Use the Emco Wheaton A0081 Adapter Wrench for installation. 5.5 Brass Stainless Steel Complies with EPA 40 CFR Part 63 Cam & Model No. Material Thread Size Groove Lbs. * A S Brass 4 Female A SS Stainless Steel 4 Female * Phase I EVR E.O. VR Gasket Replacement O-ring Replacement A0076 Vapor Adapter Material Body: Aluminum Gasket: Buna-N B C Installed Height A The Emco Wheaton A0076 Vapor Adapter is used in dual point fill systems on the vapor return line. It features a poppet design which seals off the vapor path and external lugs on the adapter body for easy installation. Use with the A Vapor Cap. CARB E.O. G A ULC Listed MH27242 Cam & Model No. Thread Size Groove Lbs. A B C A Female NPSM * A Female NPSM A Female BSPP *Most common variant Gasket for A

12 Vapor Caps A0099 Vapor Adapter Cap Material Body: Aluminum Cams: Brass Links: Steel Seal: Buna-N 1.75 Installed Height 6.6 The Emco Wheaton A /003 Vapor Adapter Cap features a cam system designed for Stage I vapor recovery dual point systems. The cap is lockable and features a self-aligning, toggle-action design with center collar to prevent breakage. The A0099 is made of corrosion resistant aluminum, powdered coated orange for vapor line identification. Cam & Model No. Groove Lbs. A A w/chain Replacement Gasket CARB E.O. G A Approved under Phase I EVR Executive Order VR-105 Complies with EPA 40 CFR Part 63 A TEST Vapor Test Cap The A TEST Vapor Test Cap is used when performing a pressure decay test. The cap incorporates the same features as the A Vapor Cap. The extended tube underneath the cap opens the poppet on the vapor adapter. Pressure is injected through the Schrader valve, and a gauge can be connected to the barbed fitting. Cam & Model No. Groove Lbs. A Replacement Gasket A LP Low Profile Vapor Adapter Cap Material Body: Aluminum Lever: Ductile Iron Gasket: Buna-N Installed Height 6.9 The A LP Low Profile Cap is designed for use when there is limited space between the top of the adapter and the spill containment lid. The cap is painted orange for vapor line identification. Cam & Model No. Groove Lbs. A LP Approved under Phase I EVR Executive Order VR Replacement Gasket 9

13 Emergency Shear Valves A0060 Underpump Emergency Valve Material Body: Cast Iron Spring: Stainless Steel Seal: Viton Viton is a registered trademark of DuPont Dow Elastomers. A B The Emco Wheaton A0060 Emergency Shear Valve incorporates a replaceable shear section and a heat sensitive fusible link assembly. The valve can be manually operated to facilitate dispenser maintenance and incorporates a 3/8 test port. The closing poppet assembly is positioned out of the fuel flow path to minimize pressure drop. The A0060 utilizes a standard three boss mounting arrangement. Available in single or double poppet variants. Model No. Description Inlet Outlet Lbs. A B * A /2 Single Poppet Female Male A /2 Single Poppet Female Female A /2 Single Poppet Female BSPT Male BSPT A /2 Single Poppet Female BSPT Female BSPT * A /2 Double Poppet Female Male A /2 Double Poppet Female Female A /2 Double Poppet Female BSPT Male BSPT A /2 Double Poppet Female BSPT Female BSPT *Most common variant UL Listed MH6518 ATEX FTZU14ATEX0204 Replacement Parts Part No. Description Outlet Lbs /2 Replacement Top; 1 Poppet Male /2 Replacement Top; 1 Poppet Female /2 Replacement Top; 1 Poppet Female BSPT /2 Replacement Top; 1 Poppet Male BSPT /2 Replacement Top; 2 Poppets Male /2 Replacement Top; 2 Poppets Female /2 Replacement Top; 2 Poppets Male BSPT /2 Replacement Top; 2 Poppets Female BSPT K Fusible Link Kit Control Arm A0065 Mounting Kit The Emco Wheaton A Mounting Kit is used to mount the A0060 and A0063 to the dispenser pan stabilizer bar. The kit includes 2 U-bolts, 4 lock washers, 4 hex nuts, 3 socket head counter-sunk screws and mounting plate. Weighs 3.8 lbs. To order the A0065 Mounting Kit with the A0060 Shear Valve, replace the first digit of the variant number with a 1. Example: A , single poppet male with mounting kit. 10

14 Emergency Shear Valves A0060 Stainless Steel Emergency Valve B Material Body: Stainless Steel Spring: Stainless Steel Seal: Viton Viton is a registered trademark of DuPont Dow Elastomers. A The Emco Wheaton A0060 stainless steel versions are constructed with a stainless steel body and top for use with E85/DEF/Ultra Low Sulfur Diesel, and incorporate the features listed on the previous page. UL Listed for up to 85% Ethanol Model No. Description Inlet Outlet Lbs. A B A S 1 1 /2 Double Poppet Female Male A S 1 1 /2 Double Poppet Female Female A S 1 1 /2 Double Poppet Female BSPT Male BSPT A S 1 1 /2 Double Poppet Female BSPT Female BSPT UL Listed MH6518 ATEX FTZU14ATEX0204 Replacement Parts Part No. Description Outlet Lbs S 1 1 /2 Replacement Top; 2 Poppets Male S 1 1 /2 Replacement Top; 2 Poppets Female S 1 1 /2 Replacement Top; 2 Poppets Male BSPT S 1 1 /2 Replacement Top; 2 Poppets Female BSPT K Fusible Link Kit Control Arm A0063EVR Vapor Shear Valve 3.7 Material Body: Cast Iron Spring: Stainless Steel Seal: Viton Viton is a registered trademark of DuPont Dow Elastomers. 7.0 The Emco Wheaton A0063EVR Vapor Shear Valve installs on vapor recovery lines under the dispenser to eliminate the escape of vapors in the event of a collision to the dispenser. The double poppet valve incorporates a 1.5 female NPT connection to the underground piping and a 1 female NPT connection to dispenser piping. The valve incorporates a 3/8 test port. The A0063EVR is approved for use with all CARB certified pre-evr and EVR Phase II vapor recovery systems. Includes 5 anchoring bolts, washers and nuts. Does not include plate or U-bolts. If required, order the A Mounting Kit, page 10. Model No. Description Inlet Outlet Lbs. A0063EVR /2 Double Poppet Female Female

15 Overfill Prevention Valve A1100 Guardian Overfill Prevention Valve The Emco Wheaton A1100 is a two stage overfill prevention valve for use in both dual point and coaxial drop tubes, gravity feed systems. Easily installs in a new or existing drop tube assembly for economical compliance with EPA regulations. Internal float design to eliminate any chance of the floats getting caught on tank walls or the riser pipe as well as to prevent float damage during installation. Stick diverter and automatic spring loaded poppet retract from the flow path when the valve is not in operation, allowing for stick gauging at any tank level. Compatible with all standard fuels. Special variants are available for most bulk chemical applications. Drain Bleed Valve for hose drainage, reduces unnecessary delays. Spring loaded and includes soft seat for positive seal Protective Retainer over floats for protection during installation, shipping and operation Cast-in Dip Stick Diverters permit stick gauging at any tank level without damage to internal parts Vertical Slide Float Design for protection during installation Auto Relatch prevents premature shut-off Integrated Body Design suitable for both dual point and coaxial drop tubes - one valve for all applications Shock Relief Valve incorporated to reduce line shock Viton O-Rings at base of valve seals drop tube to valve to protect against leakage Material Body: Aluminum Floats: HDPE Seals: Viton Specifications Weight: 5.2 lbs. Diameter: 3.76 Length: 18.0 A A or A A A A Viton is a registered trademark of Dupont Dow Elastomers. A1100 Assembly Approvals CARB Approval 99-8 ULC MH21164 ATEX FTZU98EX0733 Florida DEP EQ-414 Straight Drop 6 or Local Requirement 12

16 Overfill Prevention Valve A1100 Guardian Overfill Prevention Systems A SF A A H 4 NPSM Male Pipe Plug without O-ring A SRFK Overfill Prevention Valve w/remote Fill Kit - Includes: Remote Fill In Sump A Tee 4 x4 x4 A S Vapor Tight OPV A Remote Fill Cage Adjustable NPSM 6 or Local Requirement A JP Remote Fill Piping Test Assembly Remote Fill Buried A SF64 6 or Local Requirement A A A A IMPORTANT - Must use an A SRF or -056SRF for this application, and must be used for new installations or tank level retrofits that allow access to the top of the tank. The EMCO SUPPLIED NIPPLES AND TEE MUST BE USED as delivered to allow the system to work properly and be vapor tight. The maximum burial depth with the supplied top nipple is 5 for slip-on spill containment; and 5 1 /2 for thread-on spill containment. For deeper burial, call Emco Customer Service at A EPA A Dip Stick Port 8 Tank 10 Tank A SRF A SRF A SERF* A SERF* Complete kits include OPV & riser assembly OPV Assembly EPA Remote Fill Cage A1100 Assembly *Compatible with E85 fuels Riser Assembly Max burial depth 5 with slip-on, and 5 1 /2 with thread-on spill containment ID Tube A NPT Tee Pipe Nipple ID controlled for vapor tight seal 13

17 Overfill Prevention Valve A1100 Guardian Dual Point Overfill Prevention Systems All assemblies are factory welded; bottom tube screws to top tube/valve assembly. No Epoxy Assemblies are vapor tight and meet the EPA 40 CFR Part 63 requirements. All standard A1100 variants are acceptable for use with up to E25 ethanol blend gasoline and B20 Biodiesel blends. Higher percentage ethanol or biodiesel require use of the E variant. Available with anodized top tube (champagne color for easy identification), to prevent corrosion build-up between tube and riser pipe. Model No. Description Kit, Assembly Valve to Tube Remote Fill Kit S Support Collar Drill Fixture Drill Fixture, Remote Fill Assemblies A Remote Fill Cage Adjustable NPSM A Remote Fill Cage Adjustable BSPP Bottom tube assemblies can be purchased separately: Model No. Description Length A Bottom Tube Assembly A Bottom Tube Assembly A Bottom Tube Assembly Drill Fixture Aligns holes for drilling to ensure vapor-tight seal Drill Fixture For remote fill applications S Support Collar 95% Fill Mark A B C Upper Tube Lower Tube Overall Max. Burial Nominal Model No. Description Length A Length B Length C Depth Tank Dia. Lbs. A Valve Only N/A N/A N/A N/A N/A 5.2 A E Valve Only E85 N/A N/A N/A N/A N/A 5.7 A Valve Only Remote Fill N/A N/A N/A N/A N/A 5.0 A S Remote Fill Export N/A N/A 28.5 A SC Remote Fill w/cage BSPT N/A N/A 27.9 A SCN Remote Fill w/cage NPT N/A N/A 25.0 A SRF Remote Fill Kit, Buried *** A SRF Remote Fill Kit, Buried *** A SRFK Remote Fill Kit, Sump A S Dual Pt Screw Together A S Dual Pt Screw Together * A1100EVR-055 Dual Pt Screw Together A S Dual Pt Screw Together * A1100EVR-056 Dual Pt Screw Together ** A1100EVR-056CF Dual Pt Screw Together A S Dual Pt Screw Together * A1100EVR-057 Dual Pt Screw Together * A1100EVR-057E Dual Pt Screw Together E A S Dual Pt Screw Together * A1100EVR-058 Dual Pt Screw Together ** A1100EVR-058CF Dual Pt Screw Together The A1100 Overfill Prevention Valve is not recommended for tanks under 6.5 in diameter. Lengths A and B are measured from the shut-off point. Maximum burial depth assumes 95% shut-off and 6 clearance between top of drop tube and inside bottom of containment manhole lid. * Phase I EVR E.O. VR-105 ** Anodized top tube *** SRF variants are designed for precise burial depth of ; tank top access required. For additional applications and installation instructions, call Customer Service at Custom lengths available. OPV systems can be ordered as a package with a fill cap and fill adapter. Contact Customer Service for ordering information. 14

18 Overfill Prevention Valve A1100 Guardian Coaxial Overfill Prevention Systems The Emco A X assemblies are factory welded; bottom tube screws to top tube/valve assembly. No Epoxy. The A X assemblies are vapor tight. These series meet the EPA 40 CFR Part 63 requirements and will pass the Pressure Decay Test (CARB TP201). Note: must be used with the Emco A Fill Adapter S Spring Loaded Self-Sealing Vapor Collar 3.25 Coaxial Drop Tube A Coaxial Self-Sealing All standard A1100 variants are acceptable for use with up to E25 ethanol blend gasoline and B20 Biodiesel blends. Higher percentage ethanol or biodiesel require use of the E variant. 95% Fill Mark Accessories: Model No. Description S Spring-loaded Self-sealing Vapor Collar A Fill Adapter for A X series A Fill Adapter for A X series C 4 Drop Tube Bottom tube assemblies can be purchased separately: Model No. Description Length A Bottom Tube Assembly A Bottom Tube Assembly A Bottom Tube Assembly 121 B Upper Lower Overall Tube Tube Tube Max. Nominal Length Length Length Burial Tank Model No. Description A B C Depth Dia. Lbs. A S* Coaxial Screw Together A S* Coaxial Screw Together A S* Coaxial Screw Together A S Coaxial Self-Sealing Screw Together A SP** Coaxial Self-Sealing Screw Together A S Coaxial Self-Sealing Screw Together A SP** Coaxial Self-Sealing Screw Together A S Coaxial Self-Sealing Screw Together A SP** Coaxial Self-Sealing Screw Together A E Coaxial Self-Sealing Screw Together E The A1100 Overfill Prevention Valve is not recommended for tanks under 6.5 in diameter. Custom lengths available. Contact Customer Service at for ordering information. Lengths A and B are measured from the shut-off point. Maximum burial depth assumes 95% shut-off and 6 clearance between top of drop tube and inside bottom of containment manhole lid. *The A x series are non-poppeted and will not pass the pressure decay test. The -06X series must be used with the Emco A Fill Adapter. **P variants include an A Fill Cap and A Fill Adapter. 15

19 Drop Tubes A0020 Drop Tube The Emco Wheaton A0020 Drop Tube is designed for use in both conventional non-vapor recovery and dual point vapor recovery systems. Emco drop tubes are a full.05 thick for added strength and to reduce shipping damage. Tube I.D. is ; O.D. is Custom lengths are available upon request. O-ring Material Tube: Aluminum O-ring: Viton Viton is a registered trademark of DuPont Dow Elastomers. CARB Executive Order G A Model No. Size Length Lbs. Standard Rolled Edge Rolled Edge Collar * A0020EVR * A0020EVR * A0020EVR * A0020EVR * A0020EVR A E (E85) A E (E85) A E (E85) A (Includes Handle) A (Includes Handle) O-ring Heavy Duty Collar * A0020EVRC * A0020EVRC * A0020EVRC * A0020EVRC * A0020EVRC *Phase I EVR E.O. VR-105 Standard Rolled Edge with Handle Model No. Description Lbs Riser Collar Kit w/ Handle A Riser Collar Kit Collar O-ring O-ring Riser Collar Kit Includes Handle A Riser Collar Kit Heavy Duty Collar Kit (p/n A) Application 16

20 Drop Tubes A0070/A0088 Coaxial Drop Tubes The Emco Wheaton A0070 Drop Tube is used for coaxial fill systems. The A0070 is not self-sealing. The tube design is narrow at the top but flares out to a standard tube size in the middle. Emco Wheaton s exclusive A0088 Drop Tube is used in coaxial fill systems to provide a self-sealing vapor line. The springloaded assembly secures the tube against the adapter during normal storage. Custom lengths are available upon request. A0070 Not Self-Sealing A0088 Self-Sealing CARB Executive Order G A Material Tube: Aluminum Model No. Size I.D. O.D. Length Lbs. A A A A A* A *Includes A Fill Adapter A0070 A0088 Coax Collar Kit Fill Adapter A A Fill Cap A A Coax Collar Kit For A0070 Drop Tube Coax Collar Kit For A0088 Drop Tube 17

21 Extractor Fittings A0079 Float Valve Extractor The Emco Wheaton A0079 Extractor Assembly consists of a cast iron extractor body and an internal bar style cage. This cage holds any length of A0075 Ball Float (sold separately). The A0079 may be ordered with a variety of port combinations to accommodate tank venting and Stage II vapor recovery piping. The A0079 is also available without an extractor cage for applications that do not require the use of a ball float and is an economical alternative for direct manifold systems. A Extractor Pipe Cap The A0079 Extractor Assemblies are available with electroless nickel coating for compatibility with E85 fuels. To order, add an E suffix to the part number. A B Material Extractor Body: Cast Iron The A0079 may be installed as part of the Emco Phase I EVR System without violating the Executive Order (VR-105) CARB Executive Order G A ULC MH27242 * Cross Style Top/Bottom Outlet Threads Cage Model No. Thread A & B Size Lbs. Extractor with Cage A x A x A x A BSPT 2 x 2 BSPT Extractor Body only A BSPT 2 x 2 BSPT N/A 8.5 A x 2 N/A 8.5 A x 2 N/A 10.8 A x 3 N/A 11.8 * Most common variant Tee Style Top/Bottom Outlet Threads Cage Model No. Thread B Size Lbs. Extractor with Cage A A A BSPT 2 BSPT Extractor Body only A N/A 7.1 A N/A 8.7 A N/A 8.7 A M (male base) 4 4 N/A

22 Accessories Extractor Fittings A0179 Extractor Cage The Emco Wheaton A0179 Extractor Cage is designed with a 3 male thread and a 2 female thread for use with the Emco Wheaton A0079 Extractor Valve and A0075 Ball Float. Use with A Bar Style Extractor Wrench. Material Body: Aluminum Handle: Steel O-ring: Buna-N Model No. Description Lbs. A Extractor Cage 1.2 A0279 Extractor Cage Test Plug The Emco Wheaton A0279 Extractor Cage Test Plug is designed for performing pressure decay tests on your underground piping and storage tank systems. Use with A Bar Style Extractor Wrench. Material Body: Aluminum Handle: Steel O-ring: Buna-N Plug: Cast Iron Model No. Description Lbs. A Test Plug 1.9 A0560 Extractor Wrench Emco Wheaton Extractor Wrenches are required to install and remove the A0584 and A0585 pipe caps and appropriate angle check, foot, and float valve extractor cages. Two head styles are available - the historic Emco Wheaton Buckeye style wrench and the A , industry standard bar style wrench. Extractor Extractor Model No. Size Lbs. Pipe Cap Fitting A Buckeye 1 1 / A A Buckeye A A , -004 A Bar Style A A0079, A0179, A0279 A Extractor Pipe Cap The Emco Wheaton A Bar Style Extractor Pipe Cap is designed to thread directly on the extractor access pipes. Requires the A Bar Style Extractor Wrench. Material Body: Aluminum Handle: Steel O-ring: Buna-N Gasket Replacement Kit Model No. Size Lbs. A Female

23 Ball Floats A0075 Ball Float The Emco Wheaton A0075 Ball Float Valves are designed to restrict product flow in the event of a UST overfill. The A0075 meets EPA requirements for a slow down device. The A0075 Ball Float Valves are available with electroless nickel coating for compatibility with E85 fuels. The ball and spring are stainless steel. To order, add an E suffix to the part number. Material Tube: Aluminum Ball: Stainless Steel The A0075 may be installed as part of the Emco Phase I EVR System without violating the Executive Order (VR-105) * Tube Tube Overall Bleed Model No. Diameter Length Length Hole Lbs. A A A A A A A A *Most common variant. Custom lengths are available upon request. CARB Executive Order G A A0078 Ball Float with Extractor Cage The Emco Wheaton A0078 combination Ball Float and Extractor Valve Cage meet the EPA requirements for a 30 minute warning device. The A0078 Ball Floats with cages are available with electroless nickel coating for compatibility with E85 fuels. The ball and spring are stainless steel. To order, add an E suffix to the part number. Material Tube: Aluminum Ball: Stainless Steel Liquid Level * Tube Tube Overall Bleed Replaces Model No. Diameter Length Length Hole Lbs. OPW A A VML-0060 A A A A A VML-2090 A A VML-0120 A A A VML-0180 A A A VML-0210 A A A *Most common variant. Custom lengths are available upon request. 20

24 Valves A0066 Multi-Purpose Check Valve Material Body: Cast Iron Poppet: Brass Springs: Stainless Steel Seal: Viton Viton is a registered trademark of DuPont Dow Elastomers Pressure relief valve incorporates o-ring seal Pressure relief setting 15 psi - 35 psi The Emco Wheaton A0066 Multi-Purpose Check Valve is designed to maintain prime and prevent unnecessary tripping of mechanical leak detectors. The A0066 is mounted at the submersible pump to relieve thermal expansion between the pump and dispenser. Vent poppet is designed to provide positive sealing and more accurate pressure relief settings. Heavy wall cast iron body construction. Model No. Size Lbs. A A0750 Ball Valve Material Body: Brass Seal: Teflon PTFE The Emco Wheaton A0750 Ball Valve is a full port 2 valve. Thread depth is.865 ; inside diameter is psi working pressure. Model No. Size Lbs. A A0732 Underpump Union Check Valve Material Body: Plastic Internal Components: Brass 2.7 Shown as installed in union coupling 2.3 The Emco Wheaton A0732 Union Check Valve is inserted into a standard 1 1 /2 union to stop the loss of prime. Body is plastic; all other components are brass. The A includes a screen. Model No. Size Lbs. A /2" 0.4 A /2"

25 Vents A0084 Pressure Vacuum Vent The Emco Wheaton A0084 is an internal pressure vacuum valve that restricts vapor escape during product drops. Typically installs on the top of the vent pipes from the underground or aboveground fuel storage tanks. The vent valve is equipped with a wire mesh screen designed to protect the storage tank vents against intrusion and blockage from rain water and debris. A normally closed poppet within the valve opens to allow the tank to vent (see chart below). The body and cap are anodized aluminum for corrosion-free service. UL Listed. Flame Arrester Material Body: Aluminum Seal: Viton Cap: Aluminum Screen: 40 Mesh Stainless Steel 5.8 Viton is a registered trademark of DuPont Dow Elastomers. UL Listed MH Model No. Inlet Pressure Setting Vacuum Setting Lbs. Replaces A BSPT H 2 0 (8.00 oz.) 0.8 H 2 0 (0.50 oz.) 2.6 A Slip On 2.00 H 2 0 (1.14 oz.) 0.8 H 2 0 (0.50 oz.) 2.0 A Thread-on 2.00 H 2 0 (1.14 oz.) 3.0 H 2 0 (1.88 oz.) 2.0 A A Slip On 2.00 H 2 0 (1.14 oz.) 3.0 H 2 0 (1.88 oz.) 2.6 A A Thread-on H 2 0 (8.00 oz.) 0.8 H 2 0 (0.50 oz.) 2.9 A A Slip On H 2 0 (8.00 oz.) 0.8 H 2 0 (0.50 oz.) 2.9 A Meets EPA 40 CFR Part 63 Requirements * A Thread-on WC WC 2.9 A Slip-on WC WC 2.6 A Thread-on WC WC 3.5 A Slip-on WC WC 3.2 *Most common variant A0085 Vent Adapters The Emco A0085 is used with A vents to connect to 3 riser pipes. Available in thread-on and slip-on versions. Aluminum construction. Material Body: Aluminum Seal: Buna Model No. Description Lbs. A Thread-on 0.6 A S 3 Slip-on 0.6 Slip-on versions incorporate 3 set screws 22

26 Vents A4103 Upward V Vent Flame Arrester Material Body: Polyethylene Cap: Polyethylene Screws: Steel Screen: 40 Mesh Stainless Steel UL Listed MH10206 The Emco Wheaton A4103 Upward V Vent utilizes a straight-up V design to rapidly disperse vapors. Slip-on style vent attaches to the pipe with three screws for easy installation. Screen can be easily removed for cleaning. Designed in accordance with NFPA 30. Model No. Inlet Material Lbs. A Polyethylene 0.7 A0785 Downward Mushroom Vent Material Body: Aluminum Screen: Brass 2.5 Flame Arrester 4.0 The Emco Wheaton A0785 Downward Mushroom Vent is designed for downward venting of storage tanks. The 30 mesh stainless steel screen can be easily removed for cleaning. The A0785 threads onto either 1.5 or 2.0 inch vent lines. Clear coated aluminum for corrosion-free service. Model No. Inlet Material Lbs. A & 2 Female Aluminum 1.0 A & 2 Female BSPT Aluminum

27 Product Identification A0996, A0997, A0998 ID Markers & Tags Emco Wheaton offers a complete line of fiberglass embedded, color coded ID tags and markers. The tags are easy to clean and maintain, and made to withstand extreme weather. The A0996 Stick-on ID tag is for use on Emco composite manholes and spill containment; can also be used on some competitor manholes. The A0997 Tank ID Tag clamps onto the storage tank fill pipe to identify the product grade, tank number and tank size. The A0998 In-Ground ID Marker is used to identify the product grade in the underground tanks. The base is constructed of die cast aluminum for a smooth appearance. The lower profile with beveled edge minimizes tripping hazard. A0996 Spill Container ID Tag A0998 In-Ground ID Marker A KIT Gallonage Kit Includes four gallonage tags, etched on both sides A0997 Tank Riser ID Tag A0996 A0997 A0998 Spill Container Tank Riser In-Ground ID Tag ID Tag ID Marker Product Description A A A Tank Monitor White w/black Text A A A Regular White w/black Cross A A A Mid-Grade Blue w/white Cross A A A Premium Red w/white Cross A A A Diesel Yellow Hexagon A A A Ultra Low Sulfur Diesel Yellow Hexagon w/black U A A A Kerosene Brown Hexagon A A A Vapor Recovery Orange w/black Text A0996-DEF A A DEF Blue w/white Text A0996-E85 A A E85 (85% Ethanol) Bronze Pentagon w/black Text A0996-UNL A A Unleaded White w/black Text Contact customer service for complete product offering. Custom configurations available. 24

28 Sealants Z0838 Anti-Seize Joint Seal Emco Wheaton Anti-Seize Joint Seal is recognized as one of the most versatile compounds available for its excellent sealing properties. Resistant to heat, cold and vibration. Model No. Size Lbs. Z /2 pint 1.3 Z0839 Super Duty Sealant The Z0839 Urethane Super Duty Sealant is a general purpose sealant for fuel and water. Net contents 10.3 oz. Model No. Lbs. Z

29 26

30 SPILL CONTAINMENT

31 Spill Containment Selection Chart Replaceable Single Wall 5 Gallon 15 Gallon Poly Stainless Steel Poly Thread On Thread On Slip On Glass On Thread On Phase I EVR Below Grade Remote Fill Drain: A1004EVR-316A A ADR A D A ADR No Drain: A1004EVR-317A A A A A A A AF Page #: 30, Phase I EVR A1004EVR-215A A1004EVR-216A 30, 71 Double Wall 5 Gallon 15 Gallon Poly Stainless Steel Poly Thread On Thread On Slip On Glass On Thread On Phase I EVR Remote Fill Phase I EVR Drain: A1004EVR-316S A GPDR A SFDR A1004EVR-215S No Drain: A1004EVR-317S A G A GP A GS A SF A1004EVR-216S Page #: 32, , 71 28

32 Spill Containment Selection Chart Non-Replaceable 5 Gallon 15 Gallon Poly Stainless Steel Thread On Slip On Thread On Slip On Slimline For Tank Monitor Drain: A N/A A T N/A No Drain: A A A TN A TM Page #: Retrofit OPW 500/700 Competitor Buckets Poly Double Wall Stainless Steel Primary Poly Secondary Stainless Steel Thread On Thread On A C Replaces Page # Franklin Fueling 39 OPW Universal 43 Fairfield 44 Pemco 44 Pomeco 44 Emco Drain: A R A RD No Drain: A R A R Page #:

33 Spill Containment Replaceable Single Wall Poly (HDPE) Adjustment screws allow change in elevation /2 (5 gallon models) 5 Gallon Thread-On Phase I CARB EVR Certified Screw-on Height HDPE Skirt A1004EVR-316A A1004EVR-317A ULC Listed MH21149 Florida DEP #EQ-524 NC DENR, MO DNR Replaces all A1004EVR-210 variants Installs on 16 centers Never Break Concrete - Easily repair or replace primary unit from grade without breaking concrete 15 Gallon Thread-On 22.6 Heavy duty, snow plow resistant ductile iron, powder coated plow rim Water-resistant cast iron lid with built-in handle, exclusive triple wiper seal and vent valve. Meets AASHTO H20 wheel loading Phase I CARB EVR Certified 18.0 Screw-on Height Galvanized Skirt HDPE bellows 4 inch NPT or BSPT thread ULC Listed MH21149 Florida DEP #EQ-695 NC DENR, MO DNR Phase I EVR Certified Executive Order VR-105 Model No. Description Application Lid Dia. Lid Wt. Total Wt. A1004EVR-316A Single wall poly, 16 center, drain, 5 gal, EVR Fill/Vapor lbs lbs. A1004EVR-317A Single wall poly, 16 center, no drain, 5 gal, EVR Vapor lbs lbs. A1004EVR-215A Single wall poly, drain, 15 gal, EVR Fill/Vapor lbs lbs. A1004EVR-216A Single wall poly, no drain, 15 gal, EVR Fill/Vapor lbs lbs. Add a V to the end of the variant number to include an A S Vapor Swivel Adapter and A Vapor Cap; add an X to include an A S Fill Swivel Adapter and A Fill Cap. Refer to pages for repair kits and replacement parts. 30

34 Replaceable Single Wall Spill Containment Stainless Steel Never Break Concrete - Easily repair or replace primary unit from grade without breaking concrete 5 Gallon Slip-on 16.0 Installs on 16 centers Heavy duty, snow plow resistant ductile iron, powder coated plow rim Water-resistant cast iron lid with built-in handle, exclusive triple wiper seal and vent valve. Meets AASHTO H20 wheel loading 16 gauge stainless steel primary unit HDPE skirt ULC Listed MH21149 Florida DEP #EQ-753 NC DENR, MO DNR 5 Gallon Thread-on 13.1 UL Approved Compression Seal Below Grade - One-piece, Rustfree Stainless Steel Construction Grade level lid is composite; also available in cast iron or diamond plate with finger hole Below grade lid is water-resistant cast iron lid with built-in handle, exclusive triple wiper seal and vent valve Available with drain or drain plug; models with drain include a Phase I EVR approved pull/push drain design 5 Gallon Below-Grade Replaceable from above ground ULC Listed MH21149 Florida DEP #EQ-753 NC DENR, MO DNR gal gal NPT or BSPT Thread Optional locking mechanism for below grade lid ULC Listed MH21149 Model No. Description Application Lid Dia. Lid Wt. Total Wt. Slip-on A A Single wall stainless steel, no drain, 5 gal Fill/Vapor lbs lbs. A ADEF Single wall stainless steel, no drain, composite lid, 5 gal DEF lbs lbs. A ADR Single wall stainless steel, drain, 5 gal Fill/Vapor lbs lbs. Thread-on A A Single wall stainless steel, no drain, 5 gal Fill/Vapor lbs lbs. A ADR Single wall stainless steel, drain, 5 gal Fill/Vapor lbs lbs. A ADRDEF Single wall stainless steel, drain, composite lid, 5 gal DEF lbs. A Below grade, stainless steel, 18 manhole, drain plug, 5 gal Fill/Vapor lbs lbs. A D Below grade, stainless steel, 18 manhole, drain, 5 gal Fill/Vapor lbs lbs. A Below grade, stainless steel, 18 manhole, drain plug, 15 gal Fill/Vapor lbs lbs. A D Below grade, stainless steel, 18 manhole, drain, 15 gal Fill/Vapor lbs lbs. Add a V to the end of the variant number to include an A S Vapor Swivel Adapter and A Vapor Cap; add an X to include an A S Fill Swivel Adapter and A Fill Cap. Refer to pages for repair kits and replacement parts. 31

35 Spill Containment Replaceable Double Wall Poly (HDPE) Adjustment screws allow change in elevation /2 (5 gallon models) 5 Gallon Thread-On 16.0 Phase I CARB EVR Certified Screw-on Height 17.8 A1004EVR-316S A1004EVR-317S ULC Listed MH21149 Florida DEP #EQ-741 NC DENR, MO DNR Replaces all A1004EVR-210 variants Installs on 16 centers Never Break Concrete - Easily repair or replace primary unit from grade without breaking concrete Heavy duty, snow plow resistant ductile iron, powder coated plow rim Water-resistant cast iron lid with built-in handle, exclusive triple wiper seal and vent valve. Meets AASHTO H20 wheel loading HDPE bellows Galvanized skirt 4 inch NPT or BSPT thread 15 Gallon Thread-On Phase I CARB EVR Certified ULC Listed MH21149 Florida DEP #EQ-695 NC DENR, MO DNR 19.0 Screw-on Height 22.6 Phase I EVR Certified Executive Order VR-105 Model No. Description Application Lid Dia. Lid Wt. Total Wt. A1004EVR-316S-CM Double wall poly, 16 center, drain, sensor, 5 gal Fill/Vapor lbs lbs. A1004EVR-316S Double wall poly, 16 center, drain, 5 gal, EVR Fill/Vapor lbs lbs. A S-CMX Double wall poly, 16 center, drain, sensor ready, 5 gal Fill lbs lbs. A1004EVR-317S Double wall poly, 16 center, no drain, 5 gal, EVR Fill/Vapor lbs lbs. A1004EVR-317S-CM Double wall poly, 16 center, no drain, sensor, 5 gal Fill/Vapor lbs lbs. A1004EVR-215S Double wall poly, drain, 15 gal, EVR Fill/Vapor lbs lbs. A1004EVR-216S Double wall poly, no drain, 15 gal, EVR Fill/Vapor lbs lbs. A SF4 Glass-on remote fill, double wall poly, drain, 15 gal Remote Fill lbs. A SF4 Glass-on remote fill, double wall poly, no drain, 15 gal Remote Fill lbs. Add a V to the end of the variant number to include an A S Vapor Swivel Adapter and A Vapor Cap; add an X to include an A S Fill Swivel Adapter and A Fill Cap. Refer to pages for repair kits and replacement parts. 32

36 Replaceable Double Wall Spill Containment Stainless Steel 5 Gallon Slip-on Never Break Concrete - Easily repair or replace primary unit from grade without breaking concrete Installs on 16 centers Heavy duty, snow plow resistant ductile iron, powder coated plow rim ULC Listed MH21149 Florida DEP #EQ-764R NC DENR, MO DNR 5 Gallon Thread-on 16.0 UL Approved Compression Seals Water-resistant cast iron lid with built-in handle, exclusive triple wiper seal and vent valve. Meets AASHTO H20 wheel loading gauge stainless steel primary and secondary units HDPE skirt ULC Listed MH21149 Florida DEP #EQ-764R NC DENR, MO DNR A GP 4 inch NPT or BSPT Thread Model No. Description Application Lid Dia. Lid Wt. Total Wt. Slip-on A G Double wall stainless steel, no drain, gauge, 5 gal Fill/Vapor lbs lbs. A GDEF DW stainless steel, no drain, gauge, composite lid, 5 gal DEF lbs lbs. A S-CM Double wall stainless steel, no drain, sensor, 5 gal Fill/Vapor lbs lbs. A GS DW stainless steel, no drain, gauge, 5 gal, Allegheny seal Viton Fill/Vapor lbs lbs. A GSN DW stainless steel, no drain, gauge, 5 gal, Allegheny seal Nitrile Fill/Vapor lbs lbs. Thread-on A G Double wall stainless steel, no drain, gauge, 5 gal Fill/Vapor lbs lbs. A GP Stainless steel primary, poly secondary, no drain, gauge, 5 gal Fill/Vapor lbs lbs. A GPDR Stainless steel primary, poly secondary, drain, gauge, 5 gal Fill/Vapor lbs lbs. Add a V to the end of the variant number to include an A S Vapor Swivel Adapter and A Vapor Cap; add an X to include an A S Fill Swivel Adapter and A Fill Cap. Refer to pages for repair kits and replacement parts. Viton is a registered trademark of DuPont Dow Elastomers. 33

37 Spill Containment Non-Replaceable Single Wall Poly (HDPE) Heavy duty, snow plow resistant ductile iron, powder coated plow rim 5 Gallon Thread-on 18.0 HDPE bellows and skirt inch NPT or BSPT thread Water-resistant cast iron lid with built-in handle, exclusive triple wiper seal and vent valve. Meets AASHTO H20 wheel loading ULC Listed MH21149 Florida DEP #EQ-524 Slimline Phase I CARB EVR Certified A1004EVR-010 A1004EVR-011 * * Model No. Description Lid Dia. Lid Wt. Total Wt. A Slimline, cast iron lid, drain, 5 gal lbs lbs. A Slimline, cast iron lid, no drain, 5 gal lbs lbs. A Slimline, cast iron lid, drain, BSPT, 5 gal lbs lbs. A1004EVR-010 Slimline, cast iron lid, drain, 5 gal, EVR lbs lbs. A1004EVR-011 Slimline, cast iron lid, no drain, 5 gal, EVR lbs lbs. A1004EVR-012 Slimline, cast iron lid, drain, BSPT, 5 gal, EVR lbs lbs. Refer to pages for repair kits and replacement parts. *Most common variant 5 Gallon 17.6 Stainless Steel Stainless Steel Flange and Bolts NPT Female Stainless steel spill containment with Nitrile seals Heavy duty, snow plow resistant ductile iron, powder coated plow rim Water-resistant cast iron lid with built-in handle, exclusive triple wiper seal and vent valve. Meets AASHTO H20 wheel loading ULC Listed Florida DEP MH21149 #EQ-524 Slip-on Thread-on Lid Lid Total Model No. Description Application Dia. Weight Weight Slip-on A Cast iron lid, 5 gal 4 riser pipe lbs lbs. A Cast iron lid, 5 gal 3 riser pipe lbs lbs. A C Composite lid, 5 gal 4 riser pipe lbs lbs. Thread-on A T Cast iron lid, drain, 5 gal 4 riser pipe lbs lbs. A TC Composite lid, drain, 5 gal 4 riser pipe lbs lbs. A TN Cast iron lid, 5 gal 4 riser pipe lbs lbs. A TNC Composite lid, 5 gal 4 riser pipe lbs lbs. Can be ordered with an A Hand Pump (refer to page 50); add a P to the end of the variant number. Refer to page 54 for replacement lids. 34

38 Spill Containment Multi-Purpose Access Manhole Includes lid, rim and HDPE skirt assembly Heavy duty, snow plow resistant ductile iron, powder coated rim Water-resistant cast iron lid with built-in handle, exclusive triple wiper seal and vent valve. Meets AASHTO H20 wheel loading Lid Lid Total Model No. Description Dia. Weight Weight A Slimline - Lid, rim and skirt assembly lbs lbs. Refer to pages 54 for replacement lids Special Applications Tank Monitor 15 Gallon Slip-on 5 Offset Pipe Entry for Tank Monitor Available for use with 2 or 4 riser pipe 16 gauge stainless steel containment will not rust Stainless steel bolts and Nitrile seals on bottom flange Water-resistant ductile iron lid with built-in handle, exclusive triple wiper seal and vent valve. Meets AASHTO H20 load rating A TMA pipe Opening /4 NPT Coupling 4 pipe Opening A TME /4 NPT Coupling 4 pipe Opening Lid Lid Total Model No. Description Application Dia. Weight Weight A TM Cast iron lid, 15 gal 2 riser pipe lbs lbs. A TMA Cast iron lid, 15 gal 2 & 4 riser pipe, 3 /4 coupling lbs. A TM Cast iron lid, 15 gal 4 riser pipe lbs lbs. A TME Cast iron lid, 15 gal 4 riser pipe, 3 /4 coupling lbs. Refer to page 54 for replacement lids. 35

39 Spill Containment Special Applications Remote Fill 5 Gallon Glass-On Stainless Steel Single Wall Stainless Steel Double Wall Creates true double wall containment from spill bucket to the piping run Assembly comes complete with 4 Dualoy 3000/LCX or Red Thread 4 single wall stub, ready for installation into the elbow and clamshell Primary and secondary containment vessels are rust-proof stainless steel Water-resistant cast iron lid with builtin handle, exclusive triple wiper seal and vent valve. Meets H20 load rating Includes EZ-Gage for instant monitoring of interstitial space ULC Listed 15 Gallon Glass-On MH21149 Stainless Steel Primary Poly Secondary 28.6 A A SF Dualoy 3000/LCX A H A A Remote Fill in Sump 36

40 Special Applications Spill Containment Remote Fill Model No. Description Lid Dia. Lid Wt. Total Wt. A AF Single wall, stainless steel, no drain, LCX, 5 gal lbs lbs. A SF Double wall, stainless steel, no drain, gauge, LCX, 5 gal lbs lbs. A SF-CM Double wall, stainless steel no drain, gauge, w/sensor, LCX, 5 gal lbs lbs. A SF64 Double wall, stainless steel, no drain, gauge, Red Thread, 5 gal lbs. A SFD Double wall, stainless steel, drain plug, gauge, LCX, 5 gal lbs lbs. A SFD64 Double wall, stainless steel, drain plug, gauge, Red Thread, 5 gal lbs. A SFDR Double wall, stainless steel, drain, gauge, LCX, 5 gal lbs lbs. A SFDR64 Double wall, stainless steel, drain, gauge, Red Thread, 5 gal lbs. A SF4 Double wall poly, drain, gauge, LCX, 15 gal lbs. A SF4 Double wall poly, no drain, gauge, LCX, 15 gal lbs. A SF4 DW SST primary, poly secondary, no drain,lcx, 15 gal lbs lbs. Color-coded lids and rims available upon request. Refer to pages for replacement parts. Overfill Prevention Components A H 4 NPSM Male Pipe Plug with o-ring A Remote Fill Cage Adjustable NPSM A Tee 4 x4 x4 NPT A Dip Stick Port A JP Remote Fill Piping Test Assembly A SF64 Red Thread 6 /4 A A A A Remote Fill Buried 37

41 Spill Containment Retrofit Stainless Steel Convert your obsolete poly bucket to state-of-the-art stainless steel - no excavation required Before After The containment vessel completely isolates the existing manhole; the lid seals inside the stainless steel vessel Water-resistant cast iron lid with built-in handle and exclusive triple wiper seal, meets AASHTO H20 wheel loading Models available for virtually all common competitors buckets - Emco will provide custom designs for rare or unique applications Models can be customized to accommodate specific height requirements. Contact our Customer Service Department ( ) for ordering information. Data sheets available on our website ( ULC Listed MH21149 Florida DEP EQ-753 EQ-764R (Double Wall) North Carolina DENR PEMEX PXR-SC-GVES- SAFP-SPTF US Patent 8,425,145 B2; other patents pending Cast Iron Cover with Triple Wiper Seal Stainless Steel Containment Vessel Stainless Steel Bolts Flange O-ring Seal Double wall variants include EZ-Gage For drain options, contact our Customer Service Department ( ) 38

42 Spill Containment Retrofit Franklin Fueling Stainless Steel EBW 702 *, 703, EBW 715, A B 16.0 B Rim ; Lid 14 *EBW 702 is slip-on EBW 715, 725 Below Grade EBW Rim ; Lid 19 Rim 16 ; Lid Phil-Tite B Rim 16 ; Lid 14 Min. Ht. Model No. Repairs A B Lbs. A CE EBW 702,703, A CES EBW 702,703,705 Short A CE15 EBW 715, Gallon A CEBG EBW 702,705, 715 Below Grade A CFD EBW A CF1 Phil-Tite A DPEB Drain Plug Kit for EBW 705,715 Inserts without drains will require purchase of the proper drain plug kit for the existing spill container. Refer to pages for installation and replacement items. 39

43 Spill Containment Retrofit OPW Stainless Steel OPW OPW Offset A B 1 10 B Rim 16.0 Lid The and series are identified with Series or 1C Series printed on the lid. You must determine if the spill containment has a 1 offset and a rubber boot (right photo). This indicates that it is a (slip-on) series, and will require a different retrofit kit than the series. Refer to table below. OPW 1SC OPW 1SC-2105 Offset A B 1 A B Rim Lid 12.5 Model No. Repairs OPW A Min. Ht. B Lbs. A C Series A CDR ; Includes Drain A CS Short A CD Double Wall A CZ Crooked Riser A CZDR ; Includes Drain A CZS ; Short A C Offset A CC 1SC-2100 Series A CC5 1SC-2105 Offset Drain Plug Kit Description A DP Drain Plug Kit, / A DPE Drain Plug Kit w/epoxy Inserts without drains will require purchase of the proper drain plug kit for the existing spill container. Refer to pages for installation and replacement items. 40

44 Retrofit OPW 84D OPW 101BG Below Grade Spill Containment OPW Stainless Steel OPW 3100 Rim 16.0 ; Lid Rim 20.5 ; Lid Rim 16.6 ; Lid OPW 4000 Rim ; Lid Model No. Repairs OPW Lbs. A C4* A CA 84D 41.0 A CBG 101BG 39.0 A CPWE 1C-3100 Series A DP Drain Plug Kit, / A DPE Drain Plug Kit w/epoxy *Not available with a drain option. Inserts without drains will require purchase of the proper drain plug kit for the existing spill container. Refer to pages for installation & replacement items. 41

45 Spill Containment Retrofit OPW 500/700 No excavation required - use existing riser pipe Eliminates all OPW primary and secondary containers Diamond plate steel lid bolts to existing OPW rim; optional 24 gasket available for sealing the diamond plate Includes: 24 diamond plate, ductile iron rim, cast iron lid with triple wiper seal, thread-on polyethylene secondary, 5 gallon stainless steel (or poly), primary with EZ-Gage Full Emco Wheaton warranty Polyethylene (HDPE) Double Wall Stainless Steel Primary Polyethylene Secondary A R Lid Wrench Special assembly tool facilitates one hour installation Original Fiberglass Secondary Eliminates need for existing rubber boot Color coded lids and rims available upon request Florida DEP #EQ-741 Florida DEP #EQ-764R Model Number Description Lbs. A1004EVR-316R 5 gal primary poly thread-on, secondary poly thread-on, drain 133 A R 5 gal primary stainless steel slip-on, secondary poly thread-on, no drain 116 A RD 5 gal primary stainless steel slip-on, secondary poly thread-on, drain 117 A RDX 5 gal primary stainless steel slip-on, secondary poly thread-on, drain, adapter, cap 127 A R-CM 5 gal primary stainless steel slip-on, secondary poly thread-on, no drain, sensor 118 A R Wrench for 24 diamond plate Seal for diamond plate X variant includes swivel fill adapter and fill cap CM variant includes two wire sensor and push to test button 42

46 Spill Containment Retrofit Universal Stainless Steel 69RT, 71CD Rim 15 ; Lid RT, 71CD; 70C-DW Rim 15.5 ; 12.5 Lid 70C; 71CD Rim ; Lid 15 Universal 69RT, 71CD Universal 70C A 11.0 Min. Model No. Repairs Ht. A Lbs. A CU Universal 69RT, 71CD; Thread-on A CU70 Universal 70C; Slip-on N/A 29.0 A DPU Drain Plug Kit, 69RT, 71CD 0.4 Inserts without drains will require purchase of the proper drain plug kit for the existing spill container. Refer to pages for installation and replacement items. 43

47 Spill Containment Retrofit Pomeco Stainless Steel Pomeco 111KP, 111KB Pomeco A Rim 15.5 ; Lid Rim 21 ; Lid Min. Model No. Repairs Ht. A Lbs. A CP1 Pomeco 111KP,111KB N/A 25.0 A CP Pomeco Refer to pages for installation and replacement items. Retrofit Fairfield, Pemco Stainless Steel Fairfield SCM-5 Pemco A Rim15.5 ; Lid 13.5 Rim ; Lid Model No. Repairs Lbs. A CF5 Fairfield SCM Model No. Repairs A Lbs. A CPEM Pemco A CPED Pemco 112 Double Wall Refer to pages for installation and replacement items. 44

48 Retrofit Spill Containment Emco Stainless Steel Emco A (Slimline) A Rim 17.6 ; Lid 15.3 Min. Model No. Repairs Ht. A Lbs. A CEW3 Emco A Series A CEW3DR Emco A Series, Includes Drain *Minimum height is measured from the inside lip of the rim to the bottom of the bucket. Refer to pages for installation and replacement items. Emco A Rim ; Lid Model No. Repairs Min. Ht. Lbs. A CEW4 Emco A1003 Series A CEW4DR Emco A1003 Series, Includes Drain A DPEW4 Drain Plug Kit, A1003 Series *Minimum height is measured from the inside lip of the rim to the bottom of the bucket. Refer to pages for installation and replacement items. 45

49 Spill Containment Retrofit Emco A Series Emco Stainless Steel Rim 17.6 ; Lid 15.3 Kit for Single Wall Kit for Double Wall There are two styles of the A Double wall versions require either an NPT or NPSM adapter; both adapters are included with each kit. You may return the unused adapter to Emco for credit. Single wall versions include an A (A P for drain versions). For stretched or compressed bellows applications, additional adapter lengths are available. Contact Customer Service at Model No. Repairs *Min. Ht. Lbs. A CEW1 A A Single Wall A CEW1DR A A Single Wall, Includes Drain A CEW1G A S Double Wall, Includes Gage A CEW1GDR A S Double Wall, Includes Drain & Gage *Minimum height is measured from the inside lip of the rim to the bottom of the bucket. Refer to pages for installation and replacement items. Emco A Series Rim 16 ; Lid 13.2 Kit for Single Wall Kit for Double Wall An A K Adapter Kit is included with the A CEW2 models. For buckets that have been installed with the bellows in a stretched position, a taller adapter may be required. Contact Customer Service at Model No. Repairs *Min. Ht. Lbs. A CEW2 A A Single Wall A CEW2DR A A Single Wall, Includes Drain A CEW2G A S Double Wall, Includes Primary Unit & Gage A CEW2GDW A S Double Wall, Includes Primary & Secondary Units & Gage A CEW2GDR A S Double Wall, Includes Primary & Secondary Units, Drain & Gage *Minimum height is measured from the inside lip of the rim to the bottom of the bucket. Refer to pages for installation and replacement items. 46

50 Spill Containment Retrofit Accessories A7901 Adapter Installed Height A K NPSM Male Thread Variants with a P include a drain port. The A7901 Adapter is used to adapt an Emco secondary flange to a slip-on primary. An A K Adapter (-306KP for drain versions) is included with the A CEW1 double wall models and the A CEW2G. A KP Installed Part No. Height Description Lbs. A K 4.00 A CEW1, CEW2 4.0 A KP 4.00 A CEW1, CEW2 4.1 A K 6.00 A CEW1, CEW2 7.5 A KP 6.00 A CEW1, CEW2 7.6 Retrofit Testing Equipment Part No. Description Diameter Lbs. A TEST Test Unit N/A 6.5 A TEST Test Cover A TEST Test Cover (-505CP) The A TEST is used with the A0081 Test Covers to perform vacuum testing on the A C Series Retrofit Spill Containment. A TEST A TEST 47

51 Spill Containment Riser Extensions - One-Piece The Emco Wheaton A0031 Riser Extensions and Adapters are designed to compensate for riser pipe variations and to accommodate spill containment retrofits. The riser extensions have 4 NPT top and bottom threads. The riser adapters have 4 NPSM top and 4 NPT bottom threads. Installed Top Bottom Part No. Height Threads Threads Lbs. Riser Extensions A NPT 4 NPT 2.7 A NPT 4 NPT 3.7 Riser Adapters * A R NPSM 4 NPT 3.7 A NPSM 4 NPT 4.1 A NPSM 4 NPT 4.4 A P NPSM 4 NPT 4.5 A NPSM 4 NPT 6.4 A P NPSM 4 NPT 6.5 A NPSM 4 NPT 7.9 A P NPSM 4 NPT 8.0 A NPSM 4 NPT 9.0 Variants with a P include a drain port *Includes 2 set screws, for use when the riser pipe threads are damaged. Installed Height 48

52 Riser Extensions - Two-Piece Spill Containment Pipe Nipples The Emco Wheaton A7901 Pipe Nipple is used in spill containment buckets to extend the fill pipe. The A7901 is available in schedule 40 pipe or stainless steel. The top and bottom threads are NPT. The Schedule 40 nipples are made from flame controlled pipe with no internal weld bead and have a nominal ID of The stainless steel nipples have a nominal ID of Schedule 40 Stainless Steel Model No. Model No. Lbs. Length A A C A CSS (close) A A SS A A SS A A SS A A SS A A SS A A SS A A SS A A SS A A SS A A SS A A SS A A SS A A SS A A SS A A SS A A SS A A SS A A SS A A SS A A SS OD ID Schedule ID Stainless Steel Pipe A Pipe Couplings The Emco Wheaton A and A Pipe Couplings convert a male riser pipe to a female, allowing for an extension nipple. The A adds only 1/4 to the original riser. 5.0 OD 5.0 OD 2.38 A Short Pipe Coupling Model No. Height Lbs. A A A Merchant Steel Coupling 49

53 Spill Containment Spill Containment Accessories A0028 Riser Lock The Emco Wheaton A Riser Lock is designed to lock the riser pipe in place when removing manholes or adapters. Can be used on 3 and 4 pipe. Model No. Lbs. A Prevents riser pipe from backing out of tank fitting A0333 Hand Pump The Emco Wheaton A0333 Hand Pump is a thermoplastic selfventing pump. The A is acceptable for use with A1003, A1004 and A1005 Spill Containment. Model No. Description Lbs. A Hand Pump 1.3 A Hand Pump w/ Mounting Bracket for A A Hand Pump w/ Mounting Bracket for A

54 Spill Containment Test Equipment A TEST The A TEST Vapor Test Cap is used when performing a pressure decay test. The cap incorporates the same features as the A Vapor Cap. The extended tube underneath the cap opens the poppet on the vapor adapter. Pressure is injected through the Schrader valve, and a gauge can be connected to the barbed fitting. A TEST Vacuum Test Apparatus The A TEST is designed to perform vacuum testing on the interstitial space in double wall spill containment. Includes Test Adapter. The Test Cap Assembly is for use when performing a vacuum test on the primary unit only. Can also be used when performing a hydrostatic test. Model No. Description A TEST Vacuum Test Apparatus Test Adapter Test Cap Assembly Air Switch 1/ Air Regulator 1/ Test Adapter Test Cap Assembly A TEST Test Apparatus A0081 Test Cover The A0081 Test Covers are used with the Emco A TEST to perform vacuum testing on Spill Containment. Part No. Spill Containment Diameter Lbs. A TEST A Series A TEST A /A Series A TEST A Series A TEST A Series, A CP A TEST 51

55 Spill Containment Tools A0081 Wrench A A Extension (Includes 1 release pin - attached to drive shaft) Hex bolt to facilitate use with a torque wrench A X Cross Bar A Q Quick Release Pin (2 included - attached to drive shaft) A D Drive Shaft Driver Assembly - Individual components can be purchased separately. See table at right. Emco Wheaton A0081wrenches are specially designed for the installation and repair of Emco Wheaton spill containers and adapters. Wrenches are available as complete units. Components can also be purchased individually. The A SET is a standard tool kit; components listed on following page. The wrenches are steel construction and are powder coated blue. Model No. Application Lbs. Tool Box Set A SET Standard Tool Kit 98.8 Complete Wrenches A Fill/Vapor Adapter 16.7 A H Spill Containment 11.2 A L Fill Adapter Lug 13.1 A R Retrofit Spill Containment 17.6 A S Secondary Flange Removal 16.5 A Pipe Nipple Extractor 14.3 Individual Components A B Fill/Vapor Adapter Bit 5.6 A HB Spill Containment Wrench Bit 5.2 A LB Fill Adapter Lug/Riser Seal Bit 2.0 A RB Retrofit Spill Containment Bit 6.5 A SB Secondary Flange Removal Bit 5.3 A B Pipe Nipple Extractor Bit 3.1 A A Drive Shaft Extension 6.3 A D Drive Shaft (w/2 Quick Pins) 7.0 A X Cross Bar 4.2 A Q Quick Release Pin 0.1 A TB Tool Box (empty) 53.5 A B A LB A HB A Fill/Vapor Adapter Wrench Use to install and remove fill and vapor adapters with octagonal bases, and the Riser Seal. Fits OPW fill and vapor adapters. A L Fill Adapter Lug Wrench Use to install and remove fill adapters with lugs. Use to adjust the center insert of the Riser Seal. Replaces the Riser Seal Wrench. Fits OPW 3 and 4 adapters. A H Spill Containment Wrench Use for installation and removal of spill containers. Place over adapter lugs. Turn to install or remove. 52 Place over hex on adapter. Turn to install or remove. Recommended torque: ft. lbs. 1) Lower toe into flange and insert into drain channel. 2) Push wrench into pipe to engage stabilizer plate. Turn to tighten or loosen. 3) Pull wrench up to release stabilizer plate and remove wrench from flange.

56 Spill Containment Tools A SET - Standard Tool Kit A A Drive Shaft Extension A D Drive Shaft A X Cross Bar A Q Quick Release Pin (3) A B Fill/Vapor Adapter Bit A HB Spill Containment Wrench Bit A SB Secondary Flange Bit A LB Fill Adapter Lug/Riser Seal Bit A B Pipe Nipple Bit A TB Tool Box A SB A B A RB A S Secondary Flange Removal Wrench Use to remove secondary containment assemblies. A Pipe Nipple Extractor Use to remove and install 4 pipe nipples. A R Retrofit Lid Wrench Required for installation of A R/-518R Retrofit Spill Containment (OPW 500/700 retrofit). Not included in standard tool kit. Tighten bolts around pipe nipple, then rotate to extract. Tighten bolts into hole pattern on secondary flange rotate to remove. 53

57 Spill Containment Replacement Parts A1004EVR-210 Series Cast Iron Lid Composite Lid Description Seal Lid Dia. Model No. Lbs. Model No. Lbs. Black A LID 20.0 A LID-C 8.3 Yellow, ULSD A LID-D 20.0 A LID-CD 8.3 White, Regular A LID-R 20.0 A LID-CR 8.3 Red, Ultra/Premium A LID-U 20.0 A LID-CU 8.3 Orange, Vapor A LID-V 20.0 A LID-CV 8.3 Lids Lid Seal Vent Valve Installed In All Lids K Vent Valve Replacement Kit A LID Cast Iron A LID-C Composite A1004EVR-316, A & -518 Series Cast Iron Lid Composite Lid Description Seal Lid Dia. Model No. Lbs. Model No. Lbs. Black A CLID 15.9 A LID 6.6 Yellow, ULSD A CLID-D 15.9 A LID-D 6.6 White, Regular A CLID-R 15.9 A LID-R 6.6 Red, Ultra/Premium A CLID-U 15.9 A LID-U 6.6 Orange, Vapor A CLID-V 15.9 A LID-V Lid Seal A CLID Cast Iron A LID Composite 15 Gallon Series; Non-Replaceable Series Spill Containment Cast Iron Lid Model No. Series Model No. Seal Lid Dia. Lbs. A1004EVR A TM A A N/A A A LID A , -501 A LID Gallon Lid Seal A1003 Series A1004 Fatboy A LID A1004 Slimline 54

58 Spill Containment Replacement Parts Lids A Retrofit Cast Iron Lid Spill Containment Model No. Model No. Lid Seal Lid Dia. Lbs. A CA, CAZ A CAL A C, CD, C5, CBG, CS, CZ A CL A CC, CC5 A CCL A CE, CE15, CES A CEL A CEW3 A CEW3L A CF1 A CFL A CF5 A CF5L A C4 A CL A CPEM, CPED A CPEML A CP A CPL A CU A CUL A CU70, CEW4 A CUL A CEW1, CEW1DR A LID A CEW2, CEW2DR A CLID A CL A Series Lid Seals Measure inside diameter as shown 10 3 / / Seal 12 3 / Seal Lid Seal Lid Seal Lid for OPW Series Incorporates the features of Emco Wheaton A1004 lids: exclusive triple wiper seal, built-in side handle, cast iron construction, and meets AASHTO H20 wheel loading. Replaces original OPW series lid; not for use with A Stainless Steel Retrofit Spill Containment. Refer to above chart for A Series Lids. Model No. Description Lbs Lid for OPW Series Replacement Seal

59 Spill Containment Replacement Parts Drain Assemblies Spill Containment Drain Drain Drain Model No. Assembly Plug Kit Adapter * Phase I EVR E.O. VR-105 Drain Plug Kits S K Pull/Push Replaceable A1004 Poly * P, A1004EVR 5 gal , N/A A1004EVR 15 gal , A1005 Stainless Steel S S Non-Replaceable A1004 Slimline, Fatboy K , N/A A1004EVR Slimline , N/A * No longer used in new spill containers; limited supply available for replacement parts. Drain Adapter P 1 plug, no epoxy plugs, expoxy S 1 plug, no epoxy plug, no epoxy plugs, epoxy Adapter Kit 2.26 top dia Drain Wrench For use on & K Drains Dip Sticks EZ-Gage For use on A S and A S Spill Containment For use on A1004EVR Spill Containment Model No. Description Lbs Dipstick Dipstick, EVR Spill Containment 1.2 A GAGE EZ-Gage, Emco Spill Containment 1.1 A GAGE For use on 5 gallon double wall spill containment in place of a dipstick. The EZ-Gage allows for handsfree, visual inspection of interstitial space, displaying green (OK) or red (TEST) to indicate if liquid removal is required O-ring Replacement Kit Electronic Sensor Easy push-button sensor test mechanism eliminates bucket removal for annual sensor testing. Provides an access to remove liquid, and for interstitial vacuum testing from the secondary containment. Includes factory-installed liquid electronic sensor with 30 cable. Accommodates the Veeder Root system. Contact Customer Service for information on ordering sensors for other systems. Model No. Description Lbs. A SEN Sensor Kit Sensor Test Port Cap 1.0 Normal Position Test Position 56

60 Spill Containment Replacement Parts Replacement Kits and Parts - A1004/A1005 Replaceable Model No. Description Lbs. A1004EVR EVR Primary Replacement Kit (EVR-210A) EVR Primary Replacement Kit (EVR-211A) DEVR Primary Replacement Kit (EVR-211AD) EVR Primary Replacement Kit (EVR-210S) EVRS Primary Replacement Kit (EVR-210S) 71.4 For buckets with shallow (compressed) primaries EVR-CM Primary Replacement Kit (EVR-210S-CM) EVR Primary Replacement Kit (EVR-211S) EVRS Primary Replacement Kit (EVR-211S) 67.7 For buckets with shallow (compressed) primaries EVR-CM Primary Replacement Kit (EVR-211S-CM) Rim Gasket A1004EVR EVR Primary Replacement Kit (EVR-215S) EVR Primary and Secondary Replacement Kit (EVR-215S) EVR Primary and Secondary Replacement Kit (EVR-216S) Rim Gasket Lid Included With Primary Replacement Kits Kits listed at left include a cast iron lid. To order with a composite lid, add a C to the end of the part number. A1004EVR EVR Primary Replacement Kit (EVR-316A) EVR Primary Replacement Kit (EVR-317A) EVR Primary Replacement Kit (EVR-316S) EVR-CM Primary Replacement Kit (EVR-316S-CM) EVR Primary Replacement Kit (EVR-317S) EVR-CM Primary Replacement Kit (EVR-317S-CM) SS Handle Kit (Lid) Primary Rim Kit Rim Gasket Rim Screw A O-ring Kit - A , A Double Wall, and A Series Flange Seal - A GS Primary Rim Kit - A , A Rim Gasket - A , A Repair Parts - A1004/A1005 Non-Replaceable A Slimline Series A Model No. Description Lbs. A CEW3 Stainless Steel Retrofit 26.0 (refer to page 45) Bellows Assembly

61 58

62 MANHOLES

63 Composite Manholes A0716 Composite Manholes The Emco Wheaton A0716 Composite Manhole is designed with lightweight, slip-resistant composite manhole covers, using the latest manufacturing technology to ensure porosity-free molding, and compact, homogeneous distribution of reinforcing fiber. The covers also utilize a UV resistant treatment to protect against sun and weather damage. Emco composite lids have a 36 month warranty. The ManholeTrak Warranty Tracking System is available on our website, Meets AASHTO H20 Wheel Loading Slip resistant tread pattern Stainless steel fittings Powder coated cast steel cam with o-ring Cam lock fittings etched to show open and close directional arrows Stainless steel pry bar cleat Galvanized steel skirt (18 ) 39, 42 & 44 Models Domed top construction to shed water Dual handle - spring-loaded and key-lift Hot rolled steel skirt Concrete anchors Recessed spot face for fuel grade ID markers Euro Lift Handle Wedding Cake Assemblies Installs over containment sump A B Lid Clear Hole Height Height Part Number Dim. A Dim. B C D A CW A CDW* A CW A CDW* C D *Includes water-tight D-Seal Add S suffix for stainless steel rim and skirt All composite manholes are available with Type 304 stainless steel rim and skirt Model Lid Overall Clear Skirt Overall Number Style Dia. A Dia. B Hole C ID D Ht. E Lbs. A SS 18 Lay-in A SS 39 Lay-in A SS 42 Lay-in A SS 44 Lay-in Painted Lids - API Product Codes Add to the end of the variant number: -D Yellow ULSD -R White Regular -U Red Premium Contact Customer Service at for additional colors 60

64 A0716 Composite Manholes Composite Manholes Lay-In Lid Overall Clear Skirt Overall Seal Options Model Number Style Dia. A Dia. B Hole ID C ID D Ht. E Lbs. A Lay-in A L 18 Lid Only Lay-in * A Lay-in A LID 39 Lid Only Lay-in * A Lay-in A LID 42 Lid Only Lay-in No Seal A Lay-in A LID 44 Lid Only Lay-in Bolt-Down Cam-Lock Rib Seal Water-resistant Rib Seal Water-resistant Cam-Lock-D * A B 39 Bolt-down A B 42 Bolt-down A B 44 Bolt-down A C 18 Cam Lock A CW 18 Cam Lock White Lid A CL 18 Lid Only Cam Lock A CWL 18 Lid Only White Cam Lock A C 39 Cam Lock A CL 39 Lid Only Cam Lock A C 42 Cam Lock A CL 42 Lid Only Cam Lock A C 44 Cam Lock A CL 44 Lid Only Cam Lock A CD 39 Cam Lock w/d-seal A CD 42 Cam Lock w/d-seal A CD 44 Cam Lock w/d-seal D-Seal, Water-tight *Most common variant Custom skirt heights available upon request Max. Dia. B Lid Dia. A Replacement Rib Seal, -018C Replacement Rib Seal, -039B, -039C Replacement Rib Seal, -042B, -042C, -044B, -044C Replacement D-Seal, -039CD Replacement D-Seal, -042CD, -044CD K Replacement Cam-Lock Assembly, -039C, -042C, -044C LK Replacement Cam-Lock-D Assembly, -039CD, -042CD, -044CD Overall Ht. E Clear Hole Dia. C Skirt Inside Dia. D Concrete Anchor Composite Drop-In Replacement Lids for Competitors Manholes Emco OPW Franklin Flexing Morrison Environ A E A LID E A M A LID A LID E A E A M 14U-4210C 318L-3812ACC 318L-4412ACC WTM-3911 WTM-4511, WTM

65 Standard Manholes A0717 Round Manholes The Emco Wheaton A0717 multi-purpose manhole provides access to all types of underground storage or containment vessels and meets AASHTO H20 wheel loading. A B Open throat design for easy access Optional galvanized steel or polyethylene skirt (8 & 12 ) Bolt-down units have water-resistant lids Cam-lock units have water-tight lids Built-in handle (18 ) Custom skirt heights available on all models Models Diamond plate steel lid Hot rolled steel skirt Concrete anchors T-bar frame Recessed handle Available in lay-in, bolt-down and cam-lock versions A B A Handle Concrete Anchor A B T-bar Frame Seal Options (24-48 Models) Lay-In Bolt-Down Max. Dia. B Lid Dia. A No Seal Ribbed Seal Water-resistant Clear Hole Dia. C Overall Ht. E Skirt Inside Dia. D Cam-Lock-D D-Seal Water-tight 3/8 Steel Drop-In Replacement Lids For Competitors Manholes Emco OPW Franklin Flexing Morrison A LID E A M 318L-3812ACC A LID 14U-4210C A LID E A M 318L-4412ACC 62

66 Standard Manholes A0717 Round Manholes Lid Dia. Max. Dia. Clear Hole Skirt I.D. Overall Model Number Style Skirt Lid A B Dia. C D Ht. E Lbs A Lay-in Steel 3/8 Steel A Lay-in Poly 3/8 Steel A Lay-in Steel 3/8 Steel * A Lay-in Steel Cast Iron * A Lay-in Poly Cast Iron A B Bolt-down Poly Cast Iron * A Lay-in Steel Cast Iron A B Bolt-down Steel Cast Iron A FG Lay-in, w/finger hole Steel Cast Iron Lid Only Cast Iron * A Lay-in Steel Cast Iron A A Lay-in Steel Cast Iron A B Bolt-down Steel Cast Iron X Lid Only Lay-in (Old style) Cast Iron L Lid Only Lay-in (> 05/14) Cast Iron A Lay-in Steel 3/8 Steel A A Lay-in Steel 3/8 Steel A CD Cam Lock w/d-seal Steel 3/8 Steel A CDA Cam Lock w/d-seal Steel 3/8 Steel A Bolt-down Steel 3/8 Steel A B Bolt-down Steel 3/8 Steel A Lay-in Steel 3/8 Steel A B Bolt-down Steel 3/8 Steel A CD Cam Lock w/d-seal Steel 3/8 Steel A Lay-in Steel 1/2 Steel A B Bolt-down Steel 1/2 Steel * A Lay-in Steel 3/8 Steel A B Bolt-down Steel 3/8 Steel A CD Cam Lock w/d-seal Steel 3/8 Steel A CDA Cam Lock w/d-seal Steel 3/8 Steel A Lay-in Steel 1/2 Steel A A Lay-in Steel 1/2 Steel A B Bolt-down Steel 1/2 Steel * A C Lay-in Steel 3/8 Steel A CB Bolt-down Steel 3/8 Steel A A Lay-in Steel 1/2 Steel A AB Lay-in Steel 1/2 Steel A B Bolt-down Steel 1/2 Steel A CD Cam Lock w/d-seal Steel 3/8 Steel A CDA Cam Lock w/d-seal Steel 3/8 Steel A D Lay-in Steel 3/8 Steel A Lay-in Steel 1/2 Steel A CD Cam Lock w/d-seal Steel 3/8 Steel A Lay-in Steel 3/8 Steel *Most common variant 63

67 Standard Manholes A0717 Square Manholes and Vaults Lift Assist A VW A VWL 1.5 The Emco Wheaton A0717 square manhole provides ease of access to a variety of tank hardware and monitoring equipment. 2 All Square Manholes 3 /8 heavy duty diamond plate lid 16 gauge steel skirt Meets AASHTO H20 wheel loading Locking Vault Manholes Double hinged lid opens and folds back to 180 Lock-access lid permanently fastened with anti-theft chain; secured with single pinned bolt The 24 and 30 vaults are reinforced with 2 x2 x 1 /4 steel angle The 36 and 48 vaults are reinforced with cross bracing of 3 structural steel channel 180 o 64

68 A0717 Square Manholes and Vaults Standard Manholes Overall Lid Total Size Model No. Style Height Lbs. Lbs. 12 * A VW Locking Vault Water-resistant A VWA Locking Vault Water-resistant A VWB Locking Vault Water-resistant A Lay-in * A ABW Bolt-down Water-resistant A BWA Bolt-down Water-resistant * A VW Locking Vault Water-resistant A VWA Locking Vault Water-resistant A VWL Locking Vault Lift Assist Water-resistant A Lay-in A A Lay-in A ABW Bolt-down Water-resistant A BBW Bolt-down Water-resistant w/handle A BW Bolt-down Water-resistant w/handle A E Lay-in w/handle A V Locking Vault * A VW Locking Vault Water-resistant A VWB Locking Vault Water-resistant A VWC Vault Bolt-down Water-resistant w/handle A VWE Locking Vault Water-resistant * A VWL Locking Vault Lift Assist Water-resistant A VWCL Vault Lift Assist Bolt-down WR w/handle A VW Locking Vault Water-resistant A VWL Locking Vault Lift Assist Water-resistant A VW Locking Vault Water-resistant A VWA Locking Vault Water-resistant 36x24x A VWAL Locking Vault Lift Assist WR 36x24x A VWE Locking Vault Water-resistant A VWL Locking Vault Lift Assist Water-resistant A VWLA Locking Vault Lift Assist Water-resistant A VWL Locking Vault Lift Assist Water-resistant A VWLA Locking Vault Lift Assist Water-resistant A VWLF Locking Vault Lift Assist WR 24x48x *Most common variant Custom sizes available upon request V = Hinged; B = Bolt-down; W = Water-resistant; L = Lift Assist Lid 65

69 Monitoring Well Manholes A0721 Monitoring Well Manholes All Emco Wheaton Monitoring Well Manholes incorporate cast-in identification triangles in accordance with API recommendations and meet AASHTO H20 wheel loading. Painted ductile iron lid and rim Optional galvanized steel or polyethylene skirt Bolt-down units have water-tight lids Custom skirt heights available Stainless steel bolts Heavy-duty (16 gauge hot rolled carbon steel) skirts available. 100% welded skirt and seam. To order, replace the first digit of the variant number with a 2. Built-in side handle on 18 models - one hand opening and positioning ID tag available on all models; large enough for all new regulatory requirements. To order, add ID to the end of the part number. A ID ID Tag Kit Includes tags and rivets for 50 units A0720 Locking Cap & Collar The Emco Wheaton A0720 locking cap and collar is used to limit access and seal monitoring wells and can be threaded or solvent welded onto a 4 PVC monitoring well pipe. It displays the monitoring well designation and includes a padlock. The cap and collar are both made of durable ABS plastic. Model No. Description Pipe Size Lbs. A Locking Cap and Collar Replacement Parts Lock/Key Set A

70 A0721 Monitoring Well Manholes Monitoring Well Manholes Skirt Overall Clear Hole Max. Size Model No. Style Type Height ID Dia. Lbs. A Bolt-down Steel * A A Bolt-down Poly * A Bolt-down Steel * A A Bolt-down Steel A Bolt-down Steel * A Bolt-down Poly A CE BD, Large Bolts, White Lid Poly A LA Lay-in Poly A Bolt-down Poly * A Bolt-down Steel * A Bolt-down Steel * A L Lay-in Steel A Bolt-down HD Steel*** A BD, 3 Bolts, White Lid Steel A A BD, 3 Bolts, White Lid Steel A ** Bolt-down Poly * A Bolt-down Poly A CC Bolt-down w/rebar Tabs Poly A L Lay-in Poly * A Bolt-down Steel A A Bolt-down Steel A L Lay-in Steel A Bolt-down Steel A Bolt-down Poly A A Bolt-down Steel A Bolt-downHD Steel*** A ** Bolt-down Poly * A Bolt-down Steel A Bolt-down Steel *Most common variant **Includes locking cap & collar ***Heavy duty Lid Replacement Parts Part No. Lid Description Lbs Lid Ductile Bolt-down Lid Gasket Bolt, 3/8 x Lid Ductile Bolt-down Lid Gasket Bolt, 5/16 x Lid Ductile Bolt-down Lid Gasket Bolt & Neoprene Washer, 3/8 x Lid Ductile Lay-in Lid Ductile Bolt-down Lid Ductile Bolt-down, A CE Lid Ductile Bolt-down, A (3 bolt) Lid Gasket Bolt & O-ring, 5/8 x 1, A CE Part No. Lid Description Lbs Bolt & Neoprene Washer, 3/8 x O-ring for 3/8 Bolt O-ring for 5/8 Bolt Neoprene Washer for 3/8 Bolt Lid Ductile Lay-in Lid Ductile Bolt-down Lid Gasket Bolt & O-ring, 5/8 x O-ring for 5/8 Bolt Lid Ductile Bolt-down Lid Gasket Bolt & O-ring, 5/8 x Bolt & O-ring, 3/8 x O-ring for 3/8 Bolt O-ring for 5/8 Bolt Neoprene Washer for 3/8 Bolt 67

71 Well Protectors A0727 Well Protectors Raintight Cap - one piece die cast aluminum cap is powdered coated for corrosion resistance and painted with contrasting black triangle Riveted Construction - cap overlaps hinge pins, preventing vandalism Lockable Optimized height - clears tallest well plug Top Kit - complete cap assembly for bare tubing Stainless Steel Hinges Open 150 o 3 5 Model No. Description Material Lbs. A A 4 x4 x5 Square Well Protector Aluminum 12.0 A S 4 x4 x5 Square Well Protector Steel 23.0 A K Top Kit for Bare Tubing Aluminum 1.6 Custom lengths available upon request 4 A S Steel A A Aluminum A0728 Well Protectors Raintight Cap - welded steel construction cap overlaps pipe to prevent rain intrusion All Steel Construction Thick 14 gauge pipe Lockable Available in 4 & 6 diameters Model No. Description Material Lbs. A x5 Round Well Protector Steel 30.0 A x5 Round Well Protector Steel 39.9 Custom lengths available upon request A A

72 PHASE I EVR

73 Direct Burial Phase I EVR System Executive Order VR Phase I CARB EVR Certified Extractor fittings and ball floats are not required components of the vapor recovery system, but may be installed without violating the Executive Order. Refer to pages 18 and 20 for product information on the A0075 Ball Float and A0079 Extractor Fitting. 11. A0079 Extractor Fitting 12. A0075 Ball Float 1. A0097 Fill Cap for Tank Probe (Refer to p. 7) A A Tank Probe Cap & Adapter (Refer to p. 7) Riser Seal 9. A0099 Vapor Cap (Refer to p. 9) 2. A ATG Adapter A F ATG Adapter for INCON Tank Probe (Refer to p. 5) Drain Valve 7. A1004EVR Spill Containment (Refer to p. 71) 10. A S Vapor Swivel Adapter (Refer to p. 8) Optional Items: A LP Low Profile Fill Cap (Refer to p. 7) 4. A0097 Fill Cap (Refer to p. 7) 5. A S Fill Swivel Adapter (Refer to p. 5) 8. A1100EVR OPV Assembly (Refer to p. 73) A LP Low Profile Vapor Cap (Refer to p. 9) A0020EVR Drop Tube 70

74 Direct Burial Phase I EVR System A1004EVR Spill Containment Replaceable Nominal capacity of 5 or 15 US gallons 4-inch NPT thread connection, requires no face seal adapter 5 Gallon A 15 Gallon A Heavy duty, snow plow resistant, ductile iron rim and lid, exceeds DOT H-20 loading specifications Lid w/triple wiper seal Replaceable from grade level HDPE primary and secondary bellows Drain valve w/ filter or plug option B B EZ-Gage or float sensor for interstitial monitoring of secondary containment HDPE or galvanized gravel guard HDPE gravel pan A1004EVR-316S A1004EVR-215S Overall Installed Total Model No. Description Dia. A Ht. B Lid Dia. Lid Lbs. Lbs. Drain Type A1004EVR-316A SW, 5 gal, 16 center Drain Valve A1004EVR-317A SW, 5 gal, 16 center None A1004EVR-215A SW, 15 gal Drain Valve A1004EVR-316S DW, 5 gal, 16 center Drain Valve A1004EVR-317S DW, 5 gal, 16 center None A1004EVR-215S DW, 15 gal Drain Valve Non-Replaceable Phase I CARB EVR Certified Nominal capacity of 5 US gallons 4-inch NPT thread connection, requires no face seal adapter A Heavy duty, snow plow resistant, ductile iron rim and lid, exceeds DOT H-20 loading specifications Lid w/triple wiper seal Non-replaceable from grade level HDPE primary bellows B Drain valve w/filter or plug option HDPE gravel guard HDPE gravel pan Overall Installed Total Model No. Description Dia. A Ht. B Lid Dia. Lid Lbs. Lbs. Drain Type A1004EVR-010 Slimline, SW, 5 gal Drain Valve A1004EVR-011 Slimline, SW, 5 gal None 71

75 Phase I Enhanced Vapor Recovery System A1004EVR Spill Containment Replacement Parts Replacement Kits Model No. Description Lbs. A1004EVR EVR Primary Replacement Kit (EVR-210A) EVR Primary Replacement Kit (EVR-211A) DEVR Primary Replacement Kit (EVR-211AD) EVR Primary Replacement Kit (EVR-210S) EVRS Primary Replacement Kit (EVR-210S) 71.4 For buckets with shallow (compressed) primaries EVR Primary Replacement Kit (EVR-211S) EVRS Primary Replacement Kit (EVR-211S) 67.7 For buckets with shallow (compressed) primaries A1004EVR EVR Primary Replacement Kit (-215S) EVR Primary and Secondary Replacement Kit (-215S) EVR Primary and Secondary Replacement Kit (-216S) A1004EVR EVR Primary Replacement Kit (EVR-316A) EVR Primary Replacement Kit (EVR-317A) EVR Primary Replacement Kit (EVR-316S) EVR Primary Replacement Kit (EVR-317S) 36.5 Lid Included with all primary replacement kits Kits listed at left include a cast iron lid. To order with a composite lid, add a C to the end of the part number. Phase I CARB EVR Certified Lids Model No. Description Lids, 5 Gallon A LID Lid & Seal, cast iron A LID-C Lid & Seal, composite Triple Wiper Seal A CLID Lid & Seal, cast iron A LID Lid & Seal, composite Triple Wiper Seal Lids, 15 Gallon Lid & Seal, cast iron Triple Wiper Seal A LID Cast Iron A LID-C Composite Drain Drain Valve Kit w/filter A CLID Cast Iron A LID Composite 72

76 Direct Burial Phase I EVR System A1100EVR Overfill Prevention Valve 1 Upper drop tube to valve body factory welded 2 Bleed valve drains fuel delivery hose after 95% shut-off 3 Diverter fins protect flapper valve during routine tank stick gauging 4 Top and bottom floats contained in protective sleeve to insure damage-free installation and removal from tank fill riser No Epoxy! 1 A 5 Die cast aluminum valve body design provides the highest delivery flow rate 6 Spring loaded reset function opens flapper valve and allows for immediate tank stick gauging 7 Flapper valve provides positive fuel shut-off at 95% total storage tank capacity 95% Fill Mark External field test port allows for manual routine testing of flapper valve 9 Valve body to male coupling factory welded C Female coupling to lower drop tube factory welded Materials and seals are compatible with up to E25 ethanol blend gasoline and B20 biodiesel blends Factory tested for operability and vapor tightness integrity The A1100EVR OPV is not recommended for underground storage tanks under 6.5 ft in diameter B Material Body: Aluminum Floats: HDPE Seals: Viton Viton is a registered trademark of Dupont Dow Elastomers. Phase I CARB EVR Certified Upper Lower Overall Max. Burial Nominal Model No. Description Length A Length B Length C Depth Tank Dia. Lbs. A1100EVR-055 Dual Pt Screw Together (14.0 ) A1100EVR-056 Dual Pt Screw Together (16.0 ) A1100EVR-057 Dual Pt Screw Together (18.2 ) A1100EVR-058 Dual Pt Screw Together (21.3 ) E Riser Collar Kit Drill Fixture Drop tube O-ring Drill Fixture Lengths A and B are measured from the shut-off point. Maximum burial depth assumes 95% shut-off and 6 clearance between top of drop tube and inside bottom of containment manhole lid. 73

77 Direct Burial Phase I EVR System A0020EVR Drop Tube The A0020EVR Drop Tube fits directly into the tank riser pipe to permit tight fill submerged filling with reduced turbulence and minimal vapor loss. 4 diameter. Model No. Length Lbs. Rolled Edge Collar A0020EVR A0020EVR A0020EVR A0020EVR Heavy Duty Collar A0020EVRC A0020EVRC A0020EVRC A0020EVRC Standard Rolled Edge Heavy Duty Collar Replacement Parts Drop Tube O-ring Material Tube: Aluminum Seals: Viton Viton is a registered trademark of DuPont Dow Elastomers. Phase I CARB EVR Certified EVR Installation and Maintenance Tools A Adapter Wrench Installation, torque tightening and removal of Emco Wheaton fill and vapor adapters, and Riser Seal. A hex bolt is welded to the top of the wrench allowing use with a torque wrench Drain Wrench Installation and removal of the Emco Wheaton A1004EVR Spill Containment Drain Valve. A H Spill Containment Wrench Installation and removal of the Emco Wheaton A1004EVR Spill Containment. A hex bolt is welded to the top of the wrench allowing use with a torque wrench Adapter Torque Wrench Use to verify the static torque of the swivel adapter in accordance to CARB Test Procedure TP.201.1B A L Adapter Lug Wrench Installation and removal of the center insert of the Emco Wheaton Riser Seal. Replaces the Riser Seal Wrench Drill Fixture Use to accurately drill the rivet holes on the top drop tube for the Emco Wheaton A1100EVR collar assembly. 74

78 PHASE II EVR

79

80 Balance Phase II Enhanced Vapor Recovery CARB Executive Orders VR-203, VR-204, VR-207, VR-208, VR % Vapor Collection Efficient LISTED 610L Classified by UL to UL 2586, Valves for Flammable Fluids CARB Approved Mix & Match with VST CARB Approved for UST and AST Installations Nozzle & Breakaway Core Credit Program, Refer to Page 80 A4005EVR Balance Vapor Recovery Nozzle A4119EVR Coaxial SafeBreak Valve CARB EVR approved for use with: Pressure Management Options ISD System Options Franklin Fueling INCON Veeder-Root Polisher Canister Healy Clean Air Separator Hirt VCS-100 Oxidizer Veeder-Root TLS

81 Balance Phase II EVR Components A4005EVR Balance Vapor Recovery Nozzle The A4005EVR Nozzle is designed for use with Balance Phase II Vapor Recovery Systems. Complies with the California Air Resources Board CARB Enhanced Vapor Recovery Program EVR Certification Procedures CP-201. CARB EVR Executive Orders VR-203, VR-204, VR-207, VR-208,VR-501 CARB Pre-EVR Mix & Match Approval Letter #09-10/ Advisory #408 California State Fire Marshall GVRC 005:007:025 CaIifornia Division of Measurement Standards 3211(d)-09 UL Listing MH1460 Classified to UL 2586 Material Body & Spout: Aluminum Lever & Guard: Thermoplastic Seals: Nitrile & Viton Scuff Guard: Vinyl Viton is a registered trademark of DuPont Dow Elastomers. A4005EVR Flow Data (kpa) Model No. Description Lbs. A4005EVR-052 New Unleaded 4.5 Refer to page 78 for Phase II EVR repair and replacement kits and tools. FLOW RATE (GPM) (LPM) (PSI) INLET PRESSURE 76

82 Balance Phase II EVR Components A4110EVR Coaxial Hose Swivel The A4110EVR 45 hose swivel provides a full range of movement to minimizing kinking and twisting of the coaxial curb hose during routine vehicle refueling. Complies with CARB CP-201 Enhanced Vapor Recovery EVR Program. Model Description Lbs. A4110EVR-001 Coaxial Hose Swivel 1.3 Repair Kits & Replacement Parts EVR Fuel Path O-ring Kit EVR Vapor Path O-ring Kit 2.75 Material Body: Cast Aluminum Snap ring: Plated Steel Swivel nut: Chrome Plated Brass 4.5 UL Listed MH6036 A4119EVR Coaxial SafeBreak Valve The A4119EVR Coaxial SafeBreak Valve is a shear pin style non-reconnectable component designed for use with Balance Phase II Vapor Recovery Systems. A dual poppet design seals off both the fuel and vapor paths upon separation due to customer related drive-off occurrences, eliminating fuel spillage, vapor emissions and minimizing damage to the dispenser unit. Complies with the California Air Resources Board CARB Enhanced Vapor Recovery Program EVR Certification Procedures CP Model No. Description Lbs. A4119EVR-020 Coaxial Shear Pin 1.6 Repair Kits & Replacement Parts EVR Fuel Path O-ring Kit Material Body: Aluminum O-rings: Buna-N Protective Cover: Vinyl 3.0 UL Listed MH17833 A0063EVR Vapor Shear Valve The A0063EVR vapor shear valve installs on the phase II vapor riser below the dispenser to eliminate the escape of vapors in the event of a collision to the dispenser. The double poppet valve incorporates a 1.5 female NPT connection to the underground piping and a 1 female NPT connection to dispenser piping. The valve incorporates a 3 /8 test port. Mounting Kit is included. Approved for use with all CARB certified pre-evr and EVR phase II vapor recovery systems. 7.0 Model No. Description Inlet Outlet Lbs. A0063EVR /2 Double Poppet Female Female 9.0 Material Body: Cast Iron Spring: Stainless Steel Seal: Viton Viton is a registered trademark of DuPont Dow Elastomers. UL Listed MH

83 Balance Phase II EVR Components Repair Kits & Replacement Parts EVR Bellows & Boot Face Kit EVR Spout Kit EVR Boot Face Kit EVR Latch Kit A4005EVR Nozzle Repair Kits Kit No. Description Lbs EVR Bellows & Boot Face Kit EVR Boot Face Kit EVR Spout Kit EVR Latch Kit EVR Fuel Path O-ring Kit EVR Bellows Band Clamp Kit 0.1 A0557EVR-002 Scuff Guard, Black 0.4 A4110EVR Hose Swivel Repair Kits Kit No. Description EVR Fuel Path O-ring Kit EVR Vapor Path O-ring Kit A4119EVR SafeBreak Repair Kits Kit No. Description EVR Fuel Path O-ring Kit A4005EVR Nozzle Required Service Tools EVR Balance Phase II EVR Service Kit Includes all Phase II installation and maintenance tools and sturdy, canvas tool bag EVR Spout Plug Use to conduct CARB test procedure TP or TP-201.6C Liquid Removal Test EVR Bellows Band Clamp Crimp Tool Use to install and crimp the A4005EVR nozzle bellows band clamps EVR Lever Guard Rivet Installation Tool Use to install the A4005EVR nozzle lever guard rivets EVR Lever Guard Rivet Removal Tool Use to remove the A4005EVR nozzle lever guard rivets EVR Bellows Retainer Plate Tool Use to secure the A4005EVR nozzle bellows during installation of the bellows band clamps EVR Balance Nozzle Adapter Use to test and verify the accuracy of the ISD vapor flow meter EVR Surrogate Spout Assembly Use to conduct a leak tightness integrity test on the ISD vapor flow meter test assembly 78

84 NOZZLES

85

86 Balance Phase II Pre-EVR Components A4005/A4015 Vapor Recovery Nozzle w/vapor Valve A4015 Short Spout 15.5 (A4005) 13.3 (A4015) 8.2 CARB Executive Orders G AD, G AM, G AJ UL Listed MH1460 Classified to UL 2586 Approved by the N.Y. Department of Environmental Conservation and the Oregon Department of Environmental Quality The A4005/A4015 Vantage has proven itself as the balance vapor recovery nozzle of choice. Developed to be user friendly, the A4005/A4015 utilizes the most up-to-date vapor recovery technology available. The A4005/A4015 offers the same lightweight and streamlined design advantages characteristic of the A4000 series product line. A low restriction vapor valve is built into the A4005/A4015 so it does not require an external vapor valve. This nozzle includes the no-seal, no-flow interlock mechanism and automatic shutoff for reliable, safe operation. It also has an internal pressure shutoff to detect vapor blockage. Material Body & Spout: Aluminum Lever: Thermoplastic Lever Guard: Aluminum Seals: Nitrile & Viton Scuff Guard: Vinyl Viton is a registered trademark of DuPont Dow Elastomers. Model No. Description Lbs. A4005/A4015 Flow Data (kpa) A New Unleaded 4.6 A Rebuilt Unleaded 4.6 A E New Unleaded E A New Unleaded Short Spout 4.4 A Rebuilt Unleaded Short Spout 4.4 A E New Unleaded E85 Short Spout 4.4 FLOW RATE (GPM) (LPM) The above part numbers include the standard glossy black scuff guard Refer to page 80 for replacement items (PSI) INLET PRESSURE 79

87 Balance System A4005/A4015 Balance Nozzle A4005 Replacement Parts Kit No. Description Lbs Spout Kit - Unleaded Boot Face Kit Clamp & Cover Kit Latch Kit Boot Only Kit Boot & Face Kit Front End Kit - Spout/Boot Clamp 52.2 mm Clamp 66.0 mm Scuff Guard, Black Emco Logo 0.4 A4015 Replacement Parts Kit No. Description Lbs Boot Face Kit Clamp & Cover Kit Latch Kit Spout Kit - Unleaded Boot & Face Kit Boot Only Kit Front End Kit - Spout/Boot Clamp 52.2 mm Clamp 66.0 mm Scuff Guard, Black Emco Logo 0.4 Nozzle & Breakaway Core Credit Policy Models Allowed Core Credit Return for Credit For Core Credit Value Against the Following Nozzles A4005 $45 Rebuilt A4005 or A4015 A4015 $45 Rebuilt A4005 or A4015 A4005EVR $85 New A4005EVR Competitor EVR Nozzle $85 New A4005EVR Breakaways A4119EVR $25 New A4119EVR Competitor EVR Breakaway $25 New A4119EVR Credits: All nozzle and breakaway cores must be returned within 90 days of invoice to be eligible for credit. Cores with cracked bodies, stripped threads or damaged in any way that limits their ability to be rebuilt will not be accepted for credit. Nozzle cores returned without a front end assembly (spout, bellows and boot face) or any other part will be subject to a 50% core credit reduction. Breakaway cores returned with only one half will be subject to a 50% core credit reduction. Invoicing: Nozzle and breakaway models allowed for core credit will be invoiced at list price less your distributor discount. Acceptable cores will be credited against those invoices. Freight: Inbound freight charges for nozzle and breakaway cores returned for credit must be prepaid by the distributor. Core Bank: Nozzle and breakaway cores may be sent to Emco in anticipation of future purchases. Emco will store all cores in the distributor s account for a maximum time period of 18-months from date received. All cores stored longer than 18 months will be discarded and no credit given. 80

88 A0500 Splash Guard Nozzle Replacement Parts The A0500 Splash Guard is constructed of TPR and is for use on all conventional nozzles. Model No. Color Lbs. A Black 0.1 A Green 0.1 A Yellow 0.1 Additional colors are available upon request; please contact our Customer Service Department at

89 82

90 DISPENSER ACCESSORIES

91 SafeBreaks Standard Shear Pin A2119 3/4 SafeBreak A SafeBreak The Emco Wheaton A2119 and A3019 Standard SafeBreaks have an economical shear pin design with 3/4 (A2119) and 1 (A3019) connections for standard applications. The double poppets seal both hoses upon separation. B Material Body: Aluminum O-rings & Seals: Buna-N & Viton Protective Cover: Plastic Viton is a registered trademark of DuPont Dow Elastomers A UL Listed MH17833 ETL ATEX (A ) FTZU07ATEX0240 Model No. Description A B Lbs. A /4 Shear Pin NPT A /4 Shear Pin BSPP A Shear Pin NPT A Shear Pin BSPP Standard Reconnect A2219 3/4 SafeBreak A SafeBreak The Emco Wheaton A2219 and A3219 Standard SafeBreaks allow for immediate return to service after a drive-away, with no repair kit required. This is made possible by a unique, reconnectable design. The double poppets seal both hoses upon separation. B Material Body: Aluminum O-rings & Seals: Buna-N & Viton Protective Cover: Plastic Viton is a registered trademark of DuPont Dow Elastomers A UL Listed MH17833 Model No. Description A B Lbs. A /4 Reconnectable NPT A /4 Reconnectable BSPP A Reconnectable NPT A Reconnectable BSPP

92 A4119EVR Balance Shear Pin SafeBreak Vapor Recovery The Emco Wheaton A4119EVR Coaxial SafeBreak is made with a costeffective shear pin design for use with coaxial, balance type hoses. A dual poppet design seals off both the fuel and vapor paths upon separation due to customer related drive-off occurrences, eliminating fuel spillage, vapor emissions and minimizing damage to the dispenser unit. 5.6 Material Body: Aluminum O-rings: Buna-N Protective Cover: Vinyl Model No. Description Lbs. A4119EVR-020 Coaxial Shear Pin 1.6 A E Coaxial Shear Pin E EVR Fuel Path O-ring Kit A4110EVR-001 Coaxial Swivel 3.0 CARB Approval 95-3 UL Listed MH17833 Phase II EVR Executive Orders VR-207, VR-208 & VR-203-I, VR-204-I The Emco Wheaton A4110EVR Coaxial Swivel is designed for use with balanced vapor recovery nozzles. The 45 swivel provides a full range of movement to minimizing kinking and twisting of the coaxial curb during routine vehicle refueling Material Body: Cast Aluminum Snap ring: Plated Steel Swivel nut: Chrome Plated Brass Model Description Lbs. A4110EVR-001 Coaxial Swivel 1.3 A E Coaxial Swivel E EVR Fuel Path O-ring Kit EVR Vapor Path O-ring Kit A4041, A4043 Splitters 4.5 CARB Approval UL Listed MH6036 Approved under Phase II EVR Executive Orders VR-207 & VR-208 The Emco Wheaton A4041 Splitter is used to convert a side mount dispenser which is not vapor ready, into a coaxial vapor recovery system. Coaxial port is 17/8. For vertical island plumbing of the vapor line, order the A For plumbing the vapor line through the dispenser wall, order the A The Emco Wheaton A4043 Splitter is for use on coaxial balance Stage II Vapor Recovery Systems. The cast aluminum body is lightweight and strong. The A4043 includes two buna o-rings for a reliable seal. Coaxial port is 17/8 ; fuel inlet and vapor outlet are 3/ Material Body: Aluminum O-rings: Buna Model Application Material Lbs. A Island Mount Aluminum 2.1 A Dispenser Mount Aluminum 1.6 A Island Mount Nickel Plated 2.5 A High Mount Aluminum CARB Approval (A4043) CARB E.O. G AL (A4041) UL Listed MH

93 Swivels/Flow Regulators/Adapters A0360 Swivel The Emco Wheaton A0360 Hose Swivel features a polished die-cast aluminum body with stainless steel male fittings. Viton o-rings provide positive sealing and compatibility with all fuels. Fluorosilicone o-rings provide excellent low temperature performance. The outlet swivel rotates 360 at the nozzle inlet to keep the nozzle in a comfortable, upright position, and prevents kinking and wear. The A0360 is designed for non-vapor recovery applications and is available with.75 or 1.0 NPT or BSPT threads. B A UL Listed MH6036 Material Body: Aluminum Seal: Viton & Fluorosilicone Viton is a registered trademark of DuPont Dow Elastomers Hose Nozzle Model No. Connection Size Connection Size A B Lbs. A /4 Female 3/4 Male A /4 Female BSPT 3/4 Male BSPT A Female 1 Male A Female BSPT 1 Male BSPT A0010 Flow Regulator The Emco Wheaton A0010 is an in-line liquid flow regulating device calibrated to limit flow to 10 gpm, in accordance with Federal EPA requirements. The A0010 is manufactured from zinc-plated steel or aluminum with 3 / 4 ports. B Material Body: Zinc-plated Steel Or Aluminum Model Inlet Outlet Installation A B Lbs. A Male Female Dispenser Outlet A Female Male Nozzle Inlet A Male Female Dispenser Outlet A CARB E.O. G AB UL Listed MH Adapter The Emco Wheaton Adapter allows you to retrofit a balance dispenser to use 3 / 4 NPT conventional hanging hardware. The Emco Wheaton AST Adapter allows you to retrofit a vacuum assist dispenser to use 3 / 4 NPT conventional hanging hardware. The adapter is a one-piece assembly / 8 Thread 3/4 NPT Material Body: Aluminum O-rings: Buna Model No. Oz AST M34 Thread 2.2 3/4 NPT AST 86

94 A0021 Standard Hose Assemblies Hose Assemblies The A0021 Emco branded hose is constructed of singlewire braid to provide static conductivity and increase hose strength. The couplings are zinc diecast with crimped aluminum ferrules; also available with internally expanded chrome plated brass fittings. Zinc diecast couplings with crimped aluminum ferrules The hose assemblies are compatible with up to E15 ethanol blend gasoline and B20 biodiesel blends. 3 /4 hose are available in black or green; add G suffix for green hose. Custom hose lengths are available. 1 Black Hardwall Hose Model No. Description Lbs. Fixed Ends A Whip 0.8 A Whip 1.3 A Whip 1.7 A Whip 2.1 A Whip 2.9 A Curb 5.3 A Curb 6.5 A Curb 7.1 A Curb 7.7 A Curb 8.9 Swivel One End A Whip 2.9 A Curb 4.1 A Curb 6.5 A Curb 7.7 A Curb 8.9 A Curb 10.1 A Curb /4 Black Hardwall Chrome Fitting Model No. Description Lbs. Fixed Ends A C 8 Whip 0.6 Swivel One End A C 7.0 Curb 3.2 A C 9.0 Curb 4.0 A C 9.5 Curb 4.1 A C 14.0 Curb 5.9 UL 330 Listed Internally expanded chrome plated brass fittings 3/4 Black or Green Hardwall Hose Model No. Description Lbs. Fixed Ends A Whip 0.6 A Whip 0.6 A Whip 0.7 A Whip 0.7 A Whip 0.8 A Curb 3.5 A Curb 3.7 A Curb 3.9 A Curb 4.1 A Curb 4.3 A Curb 5.1 A Curb 5.9 A Curb 6.3 Swivel One End A Whip 0.6 A Whip 0.7 A Whip 0.8 A Curb 2.0 A Curb 3.6 A Curb 3.8 A Curb 4.0 A Curb 4.1 A Curb 4.3 A Curb 4.5 A Curb 5.1 A Curb 5.9 A0027 Conventional Hanging Hardware Kits Complete assemblies are factory tested and include: 3 /4 hardwall hose: 12 whip & 8.5 curb, fixed ends 3 /4 hose swivel & 3 /4 breakaway Adapters sold separately (see previous page) Model No. Description Lbs. A Shear Pin Breakaway 5.5 A R Reconnectable Breakaway 5.9 Custom assemblies available 87

95 Dispenser Sumps A0718 Above Ground Dispenser Sumps The Emco Wheaton A0718 Above Ground Dispenser Sump is designed for use in marina and aboveground applications to mount dispensers that are plumbed to above ground tanks. The A0718 is constructed of Type 304 stainless steel. Includes hardware for the shear valve stabilizer bar and to mount the frame to the sump. Piping penetration is done on site. The upper dispenser frame is interchangeable. When upgrading dispensers, it is only necessary to change out the frame; the sump remains in place. Material Frame and Sump: 304 Stainless Steel Hardware: Stainless Steel Florida DEP EQ-870 Stainless Steel Bolt Pattern A 20.1 Width Bolt Pattern B Rain Lip C 16.1 Overall Height A CMDR-2 Rain Lip D 28.9 Length Bolt Pattern Rain Lip Model No. Description A Mid B C D A CMDR-1 Commander; 1 bracket/1 mounting plate/1 stabilizer bar 19.75" A CMDR-2 Commander; 2 brackets/2 mounting plates/2 stabilizer bars 19.75" A ATLS-1 Gasboy Atlas; 1 bracket/1 mounting plate/1 stabilizer bar 12.60" 6.3" A ATLS-2 Gasboy Atlas; 2 brackets/2 mounting plates/2 stabilizer bars 12.60"

96 A0729 E-Stop Switch Pedestal Fuel Stop Switch Pedestal The Emco Wheaton A E-Stop Switch Pedestal is designed for emergency shut-off switches. A hole in the base provides wiring access. Welded aluminum construction. Tiger series 38 super durable powder coating in anodized silver, meets AAMA 2604 compliance providing corrosion and weather resistance in marine and other harsh environments. UV resistant for five years in Florida exposure. E-stop and sign not included. Material Pedestal: Powder coated aluminum Base: Powder coated aluminum 2 square hole 48 8 Model No. Height Lbs. A Custom sizes available 89

97 90

98 CROSS REFERENCE

99 Competitor Cross Reference Emco Description OPW Franklin Universal Morrison Bros. Caps and Adapters A FILL ADAPTER BRASS 4X4 633T L-0200A A A FILL ADAPTER ALUMINUM 4X4 633T-8075 A S FILL SWIVEL ADAPTER BRASS 4X4 61SALP-1020EVR SWF-100-B 305SA-0200AA A VAPOR ADAPTER AL 4 CAMX3 RISER 1611AV V AA A VAPOR ADAPTER AL 4 CAMX4 RISER 1611AV V AA A S VAPOR SWIVEL ADAPTER BRASS 4X4 61VSA-1020EVR SWV-101-B 323SA-0200-AA A TIGHT FILL ADAPTER COAX A TCP CA AL-0100-AA A TIGHT FILL ADAPTER COAX A TC CA AL-0100-AA A LP TIGHT FILL CAP 4 LOW PROFILE 634LPC A TIGHT FILL CAP 4 634TT-7085EVR C-0100-ACEVR A TIGHT FILL CAP 4 FOR TANK PROBE 62M TM-40 A VAPOR CAP T-7085 EVR VC C-0100-ACEVR A LP VAPOR CAP 4 LOW PROFILE 1711LPC VC-30 Emergency Shear Valves A SHEAR VALVE 1 POP MALE 10BM RMS M 0000 AVU A SHEAR VALVE 1 POP FEMALE 10BF RFS F 0000 AVU A SHEAR VALVE 2 POP MALE 10BHMP DP-RM-15 A SHEAR VALVE 2 POP FEMALE 10BFP DP-RF-15 A0063EVR-024 VAPOR SHEAR VALVE 2 POP FEMALE 60VSP TOP KIT A POP MALE 10RMT TOP KIT A POP FEMALE 10RFT TOP KIT A POP MALE 10RMTP TOP KIT A POP FEMALE 10FTP Overfill Prevention Valves A GUARDIAN VALVE ONLY 4 61SO-4BYT A S DUAL POINT SCREW TOGETHER 4 X13 71SO-400C A S DUAL POINT SCREW TOGETHER 4 X15 71SO-410C A S DUAL POINT SCREW TOGETHER 4 X A S DUAL POINT SCREW TOGETHER 4 X A S COAX SCREW TOGETHER 4 X13 61SOC A S COAX SCREW TOGETHER 4 X A S COAX SCREW TOGETHER 4 X18 61SOC-4011 A S COAX SCREW TGTHR POPPET 4 X13 61SOP-4002 A S COAX SCREW TGTHR POPPET 4 X18 61SOP-4012 A1100EVR-055 DP SCREW TOGETHER EVR 4 X13 71SO-400C A1100EVR-056 DP SCREW TOGETHER EVR 4 X15 71SO-410C A1100EVR-057 DP SCREW TOGETHER EVR 4 X A1100EVR-057E DP SCREW TOGETHER EVR 4 X18 E85 61SOM-412C-EVR A1100EVR-058 DP SCREW TOGETHER EVR 4 X21 71SO-420C Drop Tubes A DROP TUBE ALUMINUM 4 X 12 61T T A DROP TUBE ALUMINUM 4 X 15 61T T A DROP TUBE ALUMINUM 4 X 17 61T-7468 A0020EVRC-004 DROP TUBE ALUMINUM 4 X 12 EVR 61T A0020EVRC-005 DROP TUBE ALUMINUM 4 X 15 EVR 61T A0020EVRC-007 DROP TUBE ALUMINUM 4 X 15 EVR 61T-7468 A DROP TUBE COAXIAL VR 4 X 12 61TCP

100 Competitor Cross Reference Emco Description OPW Franklin Universal Morrison Bros. Ball Floats & Extractor Fittings A BALL FLOAT 2X5 1/8 BH 53VL AV A BALL FLOAT 2X6.87 1/16 BH 53VL A BALL FLOAT 2X18 1/8 BH AV A BALL FLOAT 2X /8 BH A BALL FLOAT 2X /8 BH AV A BALL FLOAT 2X /8 BH AV A A BALL FLOAT/CAGE 2X9 1/16 BH 53VML-2090 A BALL FLOAT/CAGE 2X /16 BH 53VML A A BALL FLOAT/CAGE 2X18 1/16 BH 53VML-0180 A A BALL FLOAT/CAGE 2X21 1/16 BH 53VML-0210 A BALL FLOAT/CAGE 3X8 1/16 BH 53VML A BALL FLOAT/CAGE 3X12 1/16 BH 53VML A BALL FLOAT/CAGE 3X18 1/16 BH 53VML A EXTRACTOR FTG & 2 CAGE 4X4X3X2 V AE A EXTRACTOR FTG & 2 CAGE 4X4X2X2 V AE A EXTRACTOR FTG & 2 CAGE 4X4X3X3 V A EXTRACTOR FTG 4X4X2X V MBE A EXTRACTOR FTG 4X4X3X V MBE A EXTRACTOR FTG 4X4X3X V A EXTRACTOR FTG & 2 CAGE 4X4X3 V AE A EXTRACTOR FTG & 2 CAGE 4X4X2 V AE A EXTRACTOR FTG 4X4X V MBE A EXTRACTOR FTG 4X4X V MBE A EXTRACTOR CAGE 2 H11930 V423 A EXTRACTOR CAGE TEST PLUG 233VMP V425 A WRENCH FOR BAR-STYLE CAGE 1 1/ W A EXTRACTOR PIPE CAP BAR STYLE AC Valves A CHECK VALVE PRES RELIEF 15-35PSI BPR A BALL VALVE 21BV FP-20 Suction System Components A UNION CHECK VALVE A AV A UNION CHECK VALVE & SCREEN AS S-0100AV Vents OPW Franklin Universal Morrison Bros. A VENT P-V 3 PRES 8 VAC 2 F EPA 623V CRB0600AV A VENT P-V 3 PRES 8 VAC 2 SLIP ON EPA 749CRBS600AV A VENT P-V 8 OZ. PRES.5 VAC 2 523V AV A VENT P-V PRES 3 VAC 2 SLIP ON 523V-2253 A VENT UPWARD V 1.5 & , /

101 Competitor Cross Reference Emco Description OPW Franklin Universal Fairfield Spill Containment A S-CM DW 16 CENTER 5 GAL SENSOR DRAIN CI A S-CM DW 16 CENTER 5 GAL SENSOR NO DRN CI A1004EVR-210A SINGLE WALL 5 GAL PP DRAIN EVR 1C-3101D CI A1004EVR-210S DOUBLE WALL 5 GAL PP DRAIN EVR 1C-3112D CI A1004EVR-211A SINGLE WALL 5 GAL PP NO DRAIN EVR 1C-3101P CI A1004EVR-211S DOUBLE WALL 5 GAL PP NO DRAIN EVR 1C-3112P CI A1004EVR-316A SW 16 CENTER 5 GAL PP DRAIN EVR 1C-3101D CI A1004EVR-316S DW 16 CENTER 5 GAL PP DRAIN EVR 1C-3112D CI A1004EVR-317A SW 16 CENTER 5 GAL PP NO DRAIN EVR 1C-3101P CI A1004EVR-317S DW 16 CENTER 5 GAL PP NO DRAIN EVR 1C-3112P CI A1004EVR-215A SINGLE WALL 15 GAL PP DRAIN EVR 6511A-0025SC151 A1004EVR-215S DOUBLE WALL 15 GAL PP DRAIN EVR 1C-31512D A RISER EXTENSION 4 X 4 X S-40 A RISER EXTENSION 4 X 4 X L S-0100AE Composite Manholes OPW Franklin Flexing Morrison Bros. A COMPOSITE LAY-IN 39X10 39CD-PL U L 3800AM A B COMPOSITE BOLT-DOWN 39X10 39CD-WT URT L 3800AM A C COMPOSITE CAM-LOCK 39X10 39CD-RL10 14URT-3810CL 418LC3800AM A CL COMPOSITE CAM-LOCK LID ONLY 39 E00714 A LID COMPOSITE LAY-IN LID ONLY 39 E U-3810C A COMPOSITE LAY-IN 42X10 14U-4210 A LID COMPOSITE LAY-IN LID ONLY 42 14U-4210C A COMPOSITE LAY-IN 44X10 44CD-PL L 4400AM A B COMPOSITE BOLT-DOWN 44X10 44CD-WT L 4400AM A C COMPOSITE CAM-LOCK 44X10 44CD-RL10 418LC4400AM A CL COMPOSITE CAM-LOCK LID ONLY 44 E00712 A LID COMPOSITE LAY-IN LID ONLY 44 E Standard Manholes OPW Franklin Pemco Fairfield A MANHOLE CI LID 18 X12 STEEL 104A STL 10618x A A MANHOLE CI LID 18 X18 STEEL STL A MANHOLE 3/8 STEEL LID 24 X10 STEEL SR2409HD 10624X HD A MANHOLE 3/8 STEEL LID 30 X10 STEEL SR3009HD 10630X HD-B A B MH 3/8 STEEL LID 30 X10 STEEL BD SR3009WT 10730X WT A MANHOLE 1/2 STEEL LID 36 X10 STEEL SR3609HD A B MH 1/2 STEEL LID 36 X10 STEEL BD WT SR3609WT A MANHOLE 1/2 STEEL LID 38 X10 STEEL SR3809HD A B MH 1/2 STEEL LID 38 X10 STEEL BD WT SR3809WT A C MANHOLE 3/8 STEEL LID 38 X10 STEEL X10 380HD A A MANHOLE 1/2 STEEL LID 42 X10 STEEL SR4209HD 420HD A D MANHOLE 3/8 STEEL LID 42 X10 STEEL 10642X10 A MANHOLE 1/2 STEEL LID 48 X10 STEEL SR4809HD 10748X10 480HD A MANHOLE CI LID 8 X12 STEEL 100C8X A MANHOLE CI LID 12 X12 STEEL 104A CI 100C12X A BW MANHOLE STL LID 12 X12 STEEL BD 10212X12 120WT A FG MANHOLE CI LID 12 X12 STEEL FINGER 104FG

102 Competitor Cross Reference Emco Description OPW Franklin Pemco Fairfield Standard Manholes, continued A MANHOLE STEEL LID 24 X10 STEEL BD WT 10724X10 240WT A MANHOLE CI LID 12 X8 STEEL 100C12X A MANHOLE 3/8 STEEL LID 36 X10 STEEL x HD A B MH 3/8 STEEL LID 36 X10 STEEL BD 10736X WT A MANHOLE 3/8 STEEL LID 48 X10 STEEL SR4809WT 10648X10 A MANHOLE CI LID 8 X9 STEEL C8X Square Manholes and Vaults A MANHOLE STEEL LID SQUARE 18 X9 18S A MANHOLE STEEL LID SQUARE 24 X9 SSQ X24 24S A A MANHOLE STEEL LID SQUARE 24 X X24X24 A ABW MANHOLE STEEL LID SQ 24 X24 BD WR 10524X24WT A V MANHOLE LOCKING VAULT 24 X A VW MANHOLE LOCKING VAULT 24 X24 WR WT Monitoring Well Manholes Universal Morrison Bros. Pemco Fairfield A MONITOR WELL CAP, COLLAR & LOCK XA-0100 AC A MONITOR WELL 18 X12 STEEL 418XAP-1200 AM 106MW18X TMW-12 A MONITOR WELL 12 X12 STEEL WC 418XAP-0400 AM 10312X MW-12 A MONITOR WELL 6 X8 STEEL 1035X6 A A MONITOR WELL 6 X10 STEEL 1035X12 A MONITOR WELL 8 X12 STEEL WC 418XAP-0900 AM 1038X12 80-MW-12 A MONITOR WELL 18 X18 STEEL 418XAP-1300 AM 180-TMW-18 A MONITOR WELL 12 X19 STEEL 10312X18 A MONITOR WELL 8 X9 STEEL WC 418XAP-0850 AM 1038X75 80-MW-8 A L MONITOR WELL 8 X9 STEEL LAY-IN 60MW MW8X75 A MONITOR WELL 8 X12 HD STEEL 418XAW-0700 AM Vapor Recovery Balanced Nozzles OPW Husky VST A4005-NUL N-NOZZLE-BAL-UL 11VF-XX A4005-RUL R-NOZZLE-BAL-UL 11VF-XX A4015-NUL N-NOZZLE-BAL-UL A4015-RUL R-NOZZLE-BAL-UL A4005EVR-052 N-NOZZLE-BAL-UL EVR VST-EVR-NB Truck Nozzle A6000-N N-STD-NOZZLE-TRUCK 7H VIII

103 Competitor Cross Reference Emco Description OPW Franklin Husky VST Safebreaks A SAFEBREAK 3/4 SHEAR PIN 66V A SAFEBREAK 3/4 RECONNECTABLE 66REC A SAFEBREAK 1 SHEAR PIN 66V-1300 A SAFEBREAK 1 RECONNECTABLE 66RB A4119EVR-020 SAFEBREAK COAXIAL SHEAR PIN EVR VSTA-EVR-SBK Swivels A SWIVEL 3/4 M X 3/4 F NPT DC3/ A SWIVEL 1 M X 1 F NPT DC1X Splitters A COAX SPLITTER ISLAND MOUNT 38CS A COAX SPLITTER HIGH Assemblies IRPCO Goodyear Thermoid A WHIP 3/4 X 8 STANDARD A WHIP 3/4 X 9 STANDARD A WHIP 3/4 X 12 STANDARD A WHIP 1 X 10 STANDARD A WHIP 1 X 12 STANDARD A CURB 3/4 X 9 STANDARD A CURB 3/4 X 10 STANDARD A CURB 3/4 X 12 STANDARD A CURB 3/4 X 14 STANDARD A CURB 3/4 X 15 STANDARD A CURB 1 X 8 STANDARD A CURB 1 X 10 STANDARD A CURB 1 X 12 STANDARD A CURB 1 X 17 STANDARD A CURB 1 X 20 STANDARD

104 NUMERICAL INDEX

105 Numerical Index Model Page Number Product Description Number Gasket Kit A , EVR Bellows & Boot Face Kit A4005EVR EVR Boot Face Kit A4005EVR EVR Spout Kit A4005EVR Top Kit Male A Top Kit Female A K Fusible Link Kit A Spout Kit UL A Boot Face Kit A4005/A Clamp & Cover Kit A4005/A Latch Kit A4005/A Lid & O-Ring Aluminum A A1100 Kit, Assembly Valve to Tube Coax Collar Kit A0070 (Not Self-Sealing) Self-Sealing Coax Collar Kit A Riser Collar Kit A Spout Kit UL A Boot & Face Kit A Remote Fill Cage Kit K Pull/Push Drain Assembly A Boot Only Kit A S Support Collar A1100 Dual Point Boot Only Kit A Boot & Face Kit A S Replacement Collar Kit Self-Sealing Coax Lid & Seal A1004,A Wrench Drain , K 56, Front End Kit Spout/Boot A Front End Kit Spout/Boot A Bellows Assembly A Top Kit Female BSP A Top Kit Male BSP A Top Kit Male A Top Kit Female A Top Kit Male BSP A Top Kit Female BSP A Riser Seal Assembly Drain Valve Kit w/filter Riser Seal Wrench EVR Latch Kit A4005EVR Swivel Adapter Torque Wrench Spill Containment Wrench Bolt 5/8 w/o-ring 8 A0721 Lid Bolt 9/16 w/o-ring 8 A0721 Lid Bolt 5/8 w/o-ring 12, 18 A0721 Lid Bolt 3/8 w/o-ring 5 A0721 Lid O-ring Kit, Swivel Adapters 5, Lid for OPW Series Spill Cont Test Adapter A TEST EVR Primary Rplcmnt Kit A1004EVR-210S 57, EVR Primary Rplcmnt Kit A1004EVR-210A 57, Dipstick Assembly A1004EVR Bolt 9/16 w/o-ring 18 A0721 Lid DEVR Prmry Rplcmnt Kit A1004EVR-211AD 57,72 Model Page Number Product Description Number EVR Primary Rplcmnt Kit A1004EVR-211A 57, DEVR Prmry Rplcmnt Kit A1004EVR-211SD EVR Primary Rplcmnt Kit A1004EVR-211S 57, EVR Pri.&Sec. Rplcmnt Kit A1004EVR-215S 57, Drain Kit A , Lid & Seal Kit A EVR Spout Plug A4005EVR Service Tool Dipstick Assembly A , EVR Bellows Band ClampCrimpTool A4005EVR EVR Lever Guard Rivet Install Tool A4005EVR EVR Lever Guard Rivet RemovalTool A4005EVR EVR Balance Phase II EVR Service Kit EVR Pri.&Sec. Rplcmnt Kit A1004EVR-216S 57, Drain Plug Kit for Drain Drain Plug Kit, K, Drains EVR Bellows Retainer Plate Tool A4005EVR EVR Fuel Path O-Ring Kit A4005,4110,4119EVR 77, EVR Vapor Path O-Ring Kit A4110EVR 77, EVR Bellows Band Clamp Kit A4005EVR EVR Balance Nozzle Adapter A4005EVR EVR Surrogate Spout Assembly A4005EVR EVR Primary Rplcmnt Kit A1004EVR-316S 57, EVR Primary Rplcmnt Kit A1004EVR-317S 57, EVR Primary Rplcmnt Kit A1004EVR-316A 57, EVR Primary Rplcmnt Kit A1004EVR-317A 57, Primary Rim Kit A Flange Seal A Series Adapter Kit Drain Handle Kit A LID Sensor Test Port Cap Flange Seal A GS Adapter Kit for Drain Drain Plug Kit, K, Drains Gasket for A Gasket 12 Lid A Adapter Coax to NPT AST Adapter Vac Assist to Conventional Clamp 52.2 mm A4005/A Replacement Gasket A0097, A0099 7, Lid Ductile 12 A Lock/Key Set A Scuff Black A4005/A Lid A1004 Fatboy Drill Fixture A , Clamp 66.0 mm A4005/A Gasket 8 Lid A Lid Ductile 8 A0721 White Lid Ductile 12 A0717 Round Lid Ductile 18 A Gasket 18 Lid A Bolt 6 Lid A Lid Ductile 6 A Gasket 6 Lid A Triple Wiper Seal , A C Lids 55 98

106 Numerical Index Model Page Number Product Description Number Lid Ductile 8 A Test Cap Assembly, A TEST Triple Wiper Seal Lid Lid Ductile 8 Lay-in A Euro Lift Handle A O-Ring Drop Tube A1100EVR Lid Ductile 12 Lay-in A Lid Cast 5 A Gasket 5 Lid A Gasket Kit, Swivel Adapters, A , A ,8, Rim Gasket, Bellows A Triple Wiper Seal A LID; A C Lids 54, Lid Cast 7 A Gasket 7 Lid A Drill Fixture for Remote Fill Triple Wiper Seal A LID 54,55 A0010 Flow Regulator 86 A0020 Drop Tube 16 A0020EVRC Drop Tube EVR 16,74 A0021 Standard 87 A0028 Riser Lock 50 A0030 Tight Fill Adapter 5 A Automatic Tank Gauge Adapter 5,70 A S Tight Fill Swivel Adapter Brass 4"x4" 5,70 A0031 Riser Extension 48 A Adapter Clamp 6 A Debris Collector 6 A0060 Shear Valve 10 A0063 Vapor Shear Valve 11,77 A0065 Mounting Kit for A A0066 Multi-Purpose Check Valve 21 A0070 Drop Tube Coaxial 17 A0075 Ball Float 20 A0076 Vapor Adapter 8 A S Vapor Swivel Adapter Brass 8,70 A0078 Ball Float with Cage 20 A0079 Extractor Fitting 18 A Extractor Tee 13,18,37 A Wrench, Adapter 52 A H Wrench, Primary Repair Kit 52 A L Wrench, Adapter Lug 52 A R Retrofit Lid Wrench 42,53 A S Wrench, Secondary Flange 53 A SET Standard Tool Kit 53 A TB Tool Box (Empty) 53 A Pipe Nipple Extractor 53 A JP Remote Fill Piping Test Assembly 13,37 A TEST Test Cover A Series 47,51 A TEST Test Cover A /A Series 51 A TEST Test Cover A Series 51 A TEST Test Cover A Series, A CP 47,51 A0084 Vent P-V 22 A0085 Vent Adapter 22 A0088 Drop Tube Coaxial Self-Sealing 17 Model Page Number Product Description Number A0089 Tight Fill Adapter Coax A A0096 Tight Fill Adapter Coax A A0097 Tight Fill Cap 7,70 A LP Tight Fill Cap Low Profile 7 A Fill Cap for Tank Probe 7,70 A0099 Vapor Cap 9,70 A LP Vapor Cap Low Profile 9 A TEST Vapor Test Cap 9,51 A0179 Extractor Cage 19 A0279 Extractor Cage Test Plug 19 A0333 Hand Pump Spill Container 50 A0360 Hose Swivel 86 A0379 Remote Fill Cage Adjustable 13,37 A Dip Stick Port 13,37 A0500 Splash Guard A2500/A A0557EVR Scuff Guard A4005EVR 78 A0560 Wrench For Buckeye Cage 19 A Extractor Pipe Cap Bar Style 19 A0716 Composite Manhole A0717 Standard Manhole, Round A0717 Standard Manhole, Square A0717 Vault A Dispenser Sump 88 A0720 Monitoring Well Cap & Collar 68 A0721/A0722 Monitoring Well Manhole 68,69 A0727 Well Protector Square 68 A0728 Well Protector Round 68 A E-Stop Switch Pedestal 89 A0732 Union Check Valve 1 1/2" 21 A0750 Ball Valve 21 A0785 Vent Downward 1.5" / 2" Female 23 A0996 ID Tag 24 A0997 Tank ID Tag 24 A0998 In-Ground ID Marker 24 A1004 Spill Cont Non-Replacable Poly 5gal 34 A GAGE EZ-Gage 56 A SEN Sensor Kit 56 A Multi-purpose Access Manhole 35 A LID Lid A Series 54 A TEST Vacuum Apparatus w/test Adptr 47,51 A LID Lid A , A Series 54 A R SC Retrofit Poly OPW 500& A1004EVR Spill Cont Non-repl SW Poly, EVR 71 A1004EVR-215A Spll Cnt Rpl SW Poly, EVR 15 gal 30,71 A1004EVR-215S Spll Cnt Rpl DW Poly, EVR 15 gal 32,71 A1004EVR-316A Spill Cnt Rpl SW Poly, EVR 5 gal 30,71 A1004EVR-316S Spill Cnt Rpl DW Poly, EVR 5 gal 32,71 A TM Spill Cnt SST Tank Monitor 2 Riser 35 A TM Spill Cnt SST Tank Monitor 4 Riser 35 A Spill Cont Non-repl Slip-On 5 gal 34 A T Spill Cont Non-repl Thread-On 5gal 34 A C SC Retrofit OPW Stnls Stl Insert A CE, CF1 SC Retrofit Franklin SST Insert 39 A CU SC Retrofit Universal SST Insert 43 99

107 Numerical Index Model Page Number Product Description Number A CP SC Retrofit Pomeco SST Insert 44 A CF5 SC Retrofit Fairfield SST Insert 44 A CPEM SC Retrofit Pemco SST Insert 44 A CEW SC Retrofit Emco SST Insert A CL Lids Retrofit Stainless Steel 55 A DP Drain Plug Kit A C 40,41 A DPE Drain Plug Kit A C Epoxy 40,41 A DPEB Drain Plug Kit A CE 39 A DPU Drain Plug Kit A CU 43 A A SC Repl SW Slip-On Stnlss Steel 31 A ADEF SC Repl SW Slip-On SST DEF 31 A AF SC Repl SW Remote Fill A G SC Repl DW Slip-On Stnlss Steel 33 A GDEF SC Repl DW Slip-On SST DEF 33 A SF SC Repl DW Remote Fill A A SC Repl SW Thread-On Stnlss Stl 31 A G SC Repl DW Thread-On Stnlss Stl 33 A ADRDEF SC Repl SW Thread-On DEF Drn 31 A R SC Retrofit Stnls Stl OPW 500& A SC Repl Below Grade 5 gal 31 A SC Repl Below Grade 15 gal 31 A Overfill Prevention Valve A XS Overfill Prevention Valve Dual Point 14 A XSRF OPV Dual Point Remote Fill 14 A XS Overfill Prevention Valve Coaxial 15 A XS OPV Coaxial Self-Sealing 15 A1100EVR Overfill Prevention Assembly EVR 73 A2119 SafeBreak 3/4"x3/4" Shearpin 84 A2219 SafeBreak 3/4" Reconnectable 84 A3019 SafeBreak 1" Shear Pin 84 A3219 SafeBreak 1" Reconnectable 84 A4005 Balance Nozzle 79 A4005EVR Balance Nozzle EVR 76 A4015 Balance Nozzle Short Spout 79 A4041 Splitter Coax 85 A4043 Splitter Not Vapor Ready to Coax 85 A4103 Vent Upward "V" Alum 2" 23 A4110EVR Swivel Coaxial 45 Degree 77,85 A4119EVR SafeBreak Coaxial Shear Pin 77,85 A H Male Pipe Plug NPSM 13,37 A7901 Pipe Nipple 49 A7901-3xxK Adptr Kit A CEW1,CEW2 47 A Merchant Steel Coupling 49 A Short Pipe Coupling 49 Z0838 Anti-Seize Joint Seal 26 Z0839 Urethane Super Duty Sealant

108 WARRANTY POLICY

109 Warranty Policy Emco Wheaton Retail Corporation service station products are warranted to be free from defects in material and workmanship under normal use and service. Non-EVR Vapor recovery nozzles are warranted for a period of twelve (12) months from date of shipment from Emco Wheaton Retail Corporation or from installation date as specified by the returned warranty card, not to exceed fourteen (14) months from the date of shipment from Emco Wheaton Retail Corporation. This warranty excludes the spout and/or front end components of balance vapor recovery nozzles unless damage is obvious when the nozzle is removed from the shipping carton and the defective nozzle is returned to Emco Wheaton Retail Corporation prior to use and within two (2) months from the date of invoice. EVR vapor recovery hanging hardware components are subject to other specific warranty conditions as stated in a separate warranty policy. Other service station products are warranted for a period of twelve (12) months from the date of manufacture. Emco Wheaton Retail Corporation shall, at its option, repair or replace that part which proves to be defective. Repaired or replacement nozzles are warranted for the balance of the original warranty period. This warranty is void unless the original purchaser returns the claimed defective item to Emco Wheaton Retail Corporation for inspection to determine whether the claimed defect is covered by this warranty. The exclusive and sole remedy under this warranty is repair or replacement of the defective part. Emco is not responsible for claims for damage caused by improper installation or maintenance; corrosive fluids; misuse of the product or use the product for other than its intended purpose; or accident, acts of God, or natural phenomena. Emco will not pay for labor or related expenses, nor shall Emco be liable for any incidental, consequential or exemplary damages. This warranty is void if the Emco Wheaton Retail Corporation product has been previously repaired with parts not approved by Emco Wheaton Retail Corporation, or if a nozzle bears the mark or imprint of a company other than Emco Wheaton Retail Corporation, indicating the nozzle has been rebuilt or repaired by a company other than Emco Wheaton Retail Corporation. EMCO WHEATON RETAIL CORPORATION MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, (WHETHER WRITTEN OR ORAL), INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. In the event a nozzle is returned to Emco Wheaton Retail Corporation within the warranty period described above, and when tested is found to be functional and without defect, Emco Wheaton Retail Corporation reserves the right to return the nozzle to the customer or apply a Core Credit (see Nozzle Core Return Program), at Emco Wheaton Retail Corporation's discretion. In the event of failure within the warranty period, call the Customer Service Department at (800) Describe the problem and provide the product date stamp information to the customer service representative. In the case of a nozzle, provide the serial number. The customer service representative will provide a product complaint number, if applicable. Ship the defective equipment PREPAID, to Emco Wheaton Retail Corporation for repair or replacement. Emco Wheaton Retail Corporation products should be used in compliance with applicable federal, state and local laws and regulations. Product selection should be based on physical specifications and limitations and compatibility with the environment and material to be handled. All illustrations and specifications are based on the latest product information available at the time of publication. Emco Wheaton Retail Corporation reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation. 102

110 2300 Industrial Park Drive Wilson, NC (Fax) 09/2017