Installation Instructions

Size: px
Start display at page:

Download "Installation Instructions"

Transcription

1 THE COLLECTION by Installation Instructions 0 BIDET FITTING Thank you for selecting American-Standard...the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. Certified to comply with ASME A..M U.S. Patent No.,, M Required Tools Roughing-in Dimensions Flat Blade Screwdriver Phillips Screwdriver Tubing Cutter BIDET OUTLINE IS SYMBOLIC (FOR FLUSHING RIM OR SPRAY) / FINISHED WALL *Wrench Adjustable Wrench DOUCHE SPRAY ADJ. -/ TO -/ -/ *Supplied with Fitting MOUNTING BIDET FAUCET CAUTION Channel Locks Turn off hot and cold water supplies before beginning. Place MOUNTING NUTS () onto the VALVE BODIES () and insert VALVE BODIES () through outside holes, from underside of the BIDET LEDGE. Drop the RUBBER RING () over the VALVE BODIES () and thread DECK ADAPTER () onto VALVE BODIE () until it locks against the internal stop. Tighten the MOUNTING NUT () to secure the VALVE BODY (). Remove (), WASHER (0) and UPPER GASKET () from () and insert into the center forward hole of BIDET. -/ -/ -/ MAX. FINISHED FLOOR (C) -/ -/ TO (H) -/ O.D. TAILPIECE -/ -/ FOR GROUND JOINT CONNECTION OR / " O.D. SLIP (INLETS) REAR VIEW WITH WALL REMOVED Replace UPPER GASKET (), and () until it locks against the internal stop. Position the side threaded outlet rearward and secure MOUNTING NUT (). DRAIN INSTALLATION STOPPER BIDET LEDGE HOT 0 COLD Assemble O-RING (), WASHER (), PIVOT ROD () and NUT () to DRAIN BODY (). Concave side of cup WASHER () is toward ball. Thread LOCKNUT (), WASHER () and GASKET () onto DRAIN BODY (). Apply a bead of PUTTY to underside of FLANGE (). Feed DRAIN BODY () up through BIDET and thread FLANGE () fully onto BODY (). Tighten LOCKNUT () firmly, keeping the PIVOT ROD () pointed towards the back of the BIDET. Push DRAIN (0) onto TAILPIECE (). PUTTY BIDET 0 CLIP

2 SPRAY INSTALLATION TEE AND HOSE CONNECTION Assemble SPRAY BODY () to BIDET. Apply putty to underside of SPRAY BODY FLANGE () to seal and secure with NUT (). Thread SPRAY HOSE () with SEAL WASHER () to SPRAY BODY (). Connect other end of HOSE () with SEAL WASHER () to bottom outlet NIPPLE () of the (). Insert SEAL () into ADAPTER () and tighten ADAPTER () to side inlet of (). Install SEAL () into coupling nut of TEE () and tighten connection to ADAPTER () Connect HOSE COUPLING NUTS () to Hot and Cold valve bodies and securely tighten. Cold Thread SPRAY CAP () onto SPRAY BODY (). PUTTY Hot Front LIFT ROD GUIDE INSTALLATION Unscrew LIFT ROD NUT () from LIFT ROD GUIDE (). Make sure SEAL () is seated into of LIFT ROD GUIDE (). Drop LIFT ROD GUIDE () into rear hole of bidet and from below secure with LIFT ROD NUT (). INSTALL HANDLES LEVER HANDLES: Push ADAPTER () on VALVE STEM (), so that the hole of the ADAPTER () without spline is facing up. See figure "A". Thread HANDLE BASE () onto DECK ADAPTER () Push HANDLE () onto ADAPTER (). Find correct position of HANDLE () by adjusting male teeth on ADAPTER () to female teeth in HANDLE (). DIVERTER KNOB: Install HANDLE ADAPTER () onto valve stem (). Push DIVERTER KNOB () onto HANDLE ADAPTER (). Install RING () onto DIVERTER KNOB ) and tighten with SCREW (0). Press on KNOB CAP (). Secure HANDLE () with HANDLE SCREW (). Push INDEX CAP () in hole of HANDLE (). 0 TOP Figure "A" SPLINE END DOWN M

3 WATER SUPPLY CONNECTIONS NOTE: FLEXIBLE SUPPLIES ARE NOT INCLUDED AND HAVE TO BE PURCHASED SEPARATELY Connect water supplies to FAUCET () with /" IPS FLEXIBLE SUPPLIES () or /" O.D. BULL-NOSE RISERS (). Use adjustable wrench to tighten connections. Do not over tighten. Be careful not to kink copper supply when bending. Use tubing cutter to cut to proper length. FINISH DRAIN INSTALLATION Position BIDET fixture and secure to floor. Insert lift rod into lift rod guide. Position EXTENSION ROD () onto POP-UP ROD () and tighten THUMBSCREW (). Remove one end of CLIP () from PIVOT ROD () by squeezing ends together while sliding. Insert PIVOT ROD () into second or third hole in EXTENSION ROD () and reassemble CLIP (). (EXTENSION ROD () may need to be bent.) Adjust STOPPER height by repositioning EXTENSION ROD () and tightening THUMBSCREW (). Using metal TAILPIECE (), make connection to the TRAP (). Cold COUPLING NUT FERRULE TEST INSTALLED FITTING 0 SERVICE With HANDLES () in OFF position, turn on WATER SUPPLIES () and check all connections for leaks. Operate both handles to flush water lines thoroughly. Turn DIVERTOR () to rim wash and bidet spray. Operate Lift Rod () and fill Bidet with water. Check that DRAIN STOPPER () makes a good seal and retains water in Bidet. Adjust stopper height by repositioning Lift Rod () and tightening Thumbscrew (). Release DRAIN STOPPER () and check all drain connections for leaks. Tighten if necessary. To change direction of handle rotation, proceed as follows: Turn valve to OFF position. Remove HANDLE and ADAPTER if present. Remove SPRING CLIP (). Lift STOP WASHER (), turn 0 and replace. Replace SPRING CLIP (). Replace HANDLE ASSEMBLY. SPRAY () may accumulate dirt causing distorted and reduced water flow. Unscrew and remove SPRAY () and rinse clean. Replace SPRAY () and operate handles several times from OFF to ON position. Do not force, handles turn only 0. CARE INSTRUCTIONS: 0 DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH. DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE M

4 THE COLLECTION by M-000A INDEX BUTTON (HOT) M-000A INDEX BUTTON (COLD) -000A HANDLE SCREW M-YYYOA LEVER HANDLE BIDET FITTING MODEL NUMBER -000A HANDLE SCREW M-YYYOA HANDLE M00-YYY0A 0-000A HANDLE ADAPTER -000A HANDLE ADAPTER M-000A DECK ADAPTER KIT 0-000A CARTRIDGE A TEE AND HOSE KIT (INCLUDING SEALS) 0-YYYOA KIT M-000A VALVE MOUNTING KIT A MOUNTING KIT A A ADAPTER KIT A COUPLING NUT 0-YYY0A DRAIN STOPPER M-000A LIFT ROD M-YYY0A COMPLETE DRAIN ASSEMBLY 0-YYY0A " FLANGE KIT 0-YYY0A BIDET SPRAY 0-000A PIVOT ROD KIT (-/" lg.) 0-000A SPRAY HOSE CONNECTION KIT 0-000A EXTENSION M-YYY0A LIFT ROD GUIDE A CLIP HOT LINE FOR HELP For toll-free information and answers to your questions, call: Weekdays :00 a.m. to :00 p.m. EST IN CANADA (TORONTO ) Weekdays :00 a.m. to :00 p.m. EST Product names listed herein are trademarks of American Standard Inc. American Standard Inc. 00 M-000A TAILPIECE INSERT A TAILPIECE WITH Replace the "YYY" with appropriate finish code CHROME SATIN 00 M

5 THE COLLECTION by Installation Instructions BIDET FITTING Thank you for selecting American-Standard...the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. Certified to comply with ASME A..M U.S. Patent No.,, M Required Tools Roughing-in Dimensions FINISHED WALL Flat Blade Screwdriver Phillips Screwdriver *Wrench Tubing Cutter Adjustable Wrench DOUCHE SPRAY (FOR FLUSHING RIM OR SPRAY) BIDET OUTLINE IS SYMBOLIC / -/ ADJ. -/ TO -/ -/ -/ *Supplied with Fitting Channel Locks MOUNTING BIDET FAUCET Turn off hot and cold water CAUTION supplies before beginning. Place MOUNTING NUTS () onto the VALVE BODIES () and insert VALVE BODIES () through outside holes, from underside of the BIDET LEDGE. Drop the RUBBER RING () over the VALVE BODIES () and thread DECK ADAPTER () onto VALVE BODIE () until it locks against the internal stop. Tighten the MOUNTING NUT () to secure the VALVE BODIES (). Remove MOUNTING NUT (), FRICTION RING (0) and UPPER GASKET () from () and insert () into the center forward hole of BIDET. Replace UPPER GASKET () and FRICTION RING (0). Position the side threaded outlet rearward and secure MOUNTING NUT (). Thread () onto () until it seats against the BIDET LEDGE. BIDET LEDGE HOT 0 COLD -/ -/ MAX. FINISHED FLOOR (C) -/ TO (H) -/ O.D. TAILPIECE DIVERTER AND VACUUM BREAKER ASSEMBLY -/ -/ FOR GROUND JOINT CONNECTION OR / " O.D. SLIP (INLETS) REAR VIEW WITH WALL REMOVED DRAIN INSTALLATION STOPPER Assemble O-RING (), WASHER (), PIVOT ROD () and NUT () to DRAIN BODY (). Concave side of cup WASHER () is toward ball. Thread LOCKNUT (), WASHER () and GASKET () onto DRAIN BODY (). Apply a bead of PUTTY to underside of FLANGE (). Feed DRAIN BODY () up through BIDET and thread FLANGE () fully onto BODY (). Tighten LOCKNUT () firmly, keeping the PIVOT ROD () pointed towards the back of the BIDET. Push DRAIN (0) onto TAILPIECE (). PUTTY BIDET 0 CLIP

6 TEE AND HOSE CONNECTION SPRAY INSTALLATION Insert SEAL () into ADAPTER () and tighten ADAPTER () to bottom of (). Cold Assemble SPRAY BODY () to BIDET. Using putty, seal underside of SPRAY BODY FLANGE () and secure with NUT (). Install SEAL () into coupling nut of TEE () and tighten connection to ADAPTER () Connect HOSE COUPLING NUTS () to Hot and Cold valve bodies and securely tighten. Hot COUPLING NUT Screw SPRAY HOSE () with SEAL WASHER () to SPRAY BODY (). Connect other end of HOSE () with SEAL WASHER () to side outlet NIPPLE () of the TRANSFER VALVE (). Screw SPRAY CAP () onto SPRAY BODY (). Front LIFT ROD GUIDE INSTALLATION PUTTY Unscrew LIFT ROD NUT () from LIFT ROD GUIDE (). Make sure SEAL () is seated into of LIFT ROD GUIDE (). Drop LIFT ROD GUIDE () into rear hole of bidet and from below secure with ROD GUIDE NUT (). INSTALL HANDLES LEVER HANDLES: Push ADAPTER () on VALVE STEM (), so that the hole of the ADAPTER () without spline is facing up. See figure "A". Thread HANDLE BASE () onto DECK ADAPTER () Push HANDLE () onto ADAPTER (). Find correct position of HANDLE () by adjusting male teeth on ADAPTER () to female teeth in HANDLE (). Secure HANDLE () with HANDLE SCREW (). DIVERTER KNOB: Install HANDLE ADAPTER (0) onto valve stem. Push DIVERTER KNOB () onto HANDLE ADAPTER (0). Install RING () onto DIVERTER KNOB () and tighten with SCREW (). Press on KNOB CAP (). Push INDEX CAP () in hole of HANDLE (). TOP VALVE STEM 0 Figure "A" SPLINE END DOWN M

7 WATER SUPPLY CONNECTIONS NOTE: FLEXIBLE SUPPLIES ARE NOT INCLUDED AND HAVE TO BE PURCHASED SEPARATELY. Connect water supplies to FAUCET () with /" IPS FLEXIBLE SUPPLIES () or /" O.D. BULL-NOSE RISERS (). Use adjustable wrench to tighten connections. Do not over tighten. Be careful not to kink copper supply when bending. Use tubing cutter to cut to proper length. FINISH DRAIN INSTALLATION Position BIDET fixture and secure to floor. Insert lift rod into lift rod guide. Position EXTENSION ROD () onto POP-UP ROD () and tighten THUMBSCREW (). Remove one end of CLIP () from PIVOT ROD () by squeezing ends together while sliding. Insert PIVOT ROD () into second or third hole in EXTENSION ROD () and reassemble CLIP (). (EXTENSION ROD () may need to be bent.) Adjust STOPPER height by repositioning EXTENSION ROD () and tightening THUMBSCREW (). Using metal TAILPIECE (), make connection to the TRAP (). Hot Cold COUPLING NUT FERRULE TEST INSTALLED FITTING 0 SERVICE With HANDLES () in OFF position, turn on WATER SUPPLIES () and check all connections for leaks. Operate both handles to flush water lines thoroughly. Turn diverter to rim wash and bidet spray. Operate Lift Rod () and fill Bidet with water. Check that DRAIN STOPPER () makes a good seal and retains water in Bidet. Adjust stopper height by repositioning Lift Rod () and tightening Thumbscrew (). Release DRAIN STOPPER () and check all drain connections for leaks. Tighten if necessary. To change direction of handle rotation, proceed as follows: Turn valve to OFF position. Remove HANDLE and ADAPTER if present. Remove SPRING CLIP (). Lift STOP WASHER (), turn 0 and replace. Replace SPRING CLIP (). Replace HANDLE ASSEMBLY. SPRAY () may accumulate dirt causing distorted and reduced water flow. Unscrew and remove SPRAY () and rinse clean. Replace SPRAY () and operate handles several times from OFF to ON position. Do not force, handles turn only 0. CARE INSTRUCTIONS: 0 DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH. DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE M

8 THE -000A HANDLE SCREW M-YYYOA HANDLE COLLECTION by BIDET FITTING MODEL NUMBER M-YYY0A KIT -000A HANDLE ADAPTER M-000A INDEX BUTTON (HOT) M-000A INDEX BUTTON (COLD) M-YYYOA LEVER HANDLE M0-YYY0A M-000A POP-UP ROD -000A HANDLE SCREW M0-000A M-YYY0A LIFT ROD GUIDE M00-YYY0A M-000A MOUNTING KIT 0-YYY0A DRAIN STOPPER 0-000A HANDLE ADAPTER M-000A ELBOW ADAPTER M-YYY0A COMPLETE DRAIN ASSEMBLY 0-YYY0A " FLANGE KIT M-000A DECK ADAPTER KIT 0-000A PIVOT ROD KIT (-/" lg.) 0-000A CARTRIDGE M-000A ADAPTER KIT M-000A VALVE MOUNTING KIT A CLIP M-000A TAILPIECE INSERT A TEE AND HOSE KIT (INCLUDING SEALS) 0-000A EXTENSION A TAILPIECE WITH A COUPLING NUT 0-YYY0A BIDET SPRAY HOT LINE FOR HELP For toll-free information and answers to your questions, call: Weekdays :00 a.m. to :00 p.m. EST IN CANADA (TORONTO ) Weekdays :00 a.m. to :00 p.m. EST Product names listed herein are trademarks of American Standard Inc. American Standard Inc A SPRAY HOSE CONNECTION KIT Replace the "YYY" with appropriate finish code CHROME SATIN 00 M

INSTALLATION INSTRUCTIONS TOWNSEND

INSTALLATION INSTRUCTIONS TOWNSEND INSTALLATION INSTRUCTIONS TOWNSEND.00 DECK MOUNT BATH FILLER.0 Thank you for selecting American Standard... the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly-please

More information

WIDESPREAD LAVATORY MODELS WITH HI-ARC SPOUT

WIDESPREAD LAVATORY MODELS WITH HI-ARC SPOUT 5951, 5961, 5981, 5983, 5993 SERIES MT122B INSTALLATION INSTRUCTIONS THESE INSTRUCTIONS MUST BE LEFT WITH HOMEOWNER WIDESPREAD LAVATORY MODELS WITH HI-ARC TRADITIONAL CROSS NOTE: Handle Inserts are not

More information

42-YP Series. Serie 42-YP Série 42-YP. Single Control Lavatory Faucet Grifo Monomando para el Baño Mitigeur de Robinet pour Lavabo

42-YP Series. Serie 42-YP Série 42-YP. Single Control Lavatory Faucet Grifo Monomando para el Baño Mitigeur de Robinet pour Lavabo 42-YP Series Serie 42-YP Série 42-YP Single Control Lavatory Faucet Grifo Monomando para el Baño Mitigeur de Robinet pour Lavabo 07-28-05 EO6852C 30022-0100 Copyright 2005, Price Pfi ster, Inc. A COMPANY

More information

Tools. For safety and easy faucet replacement, San-Ei recommends the use of the following helpful tools:

Tools. For safety and easy faucet replacement, San-Ei recommends the use of the following helpful tools: BW-0BH INSTALLATION INSTRUCTIONS SINGLE HANDLE Kitchen Faucet Tools For safety and easy faucet replacement, San-Ei recommends the use of the following helpful tools: SAFETY GLASSES PIPE WRENCH PLIERS CHANNEL

More information

Installation Instructions for Wall Mount, Deck Mount and Pre-rinse Faucets

Installation Instructions for Wall Mount, Deck Mount and Pre-rinse Faucets Installation Instructions for Wall Mount, Deck Mount and Pre-rinse Faucets SAVE FOR END USER ELKAY 2222 CAMDEN COURT OAK BROOK, IL 60523 USA WALL MOUNT ASSEMBLY General Instructions Turn off the water

More information

31 Series. Serie 31 Série 31. Two Handle Kitchen Faucet Grifo Con Dos Manijas Para Cocina Robinet De Cuisine À Avec Deux Poignées COMPANY

31 Series. Serie 31 Série 31. Two Handle Kitchen Faucet Grifo Con Dos Manijas Para Cocina Robinet De Cuisine À Avec Deux Poignées COMPANY 31 Series Serie 31 Série 31 Two Handle Kitchen Faucet Grifo Con Dos Manijas Para Cocina Robinet De Cuisine À Avec Deux Poignées 05-06-08 EO7284A 32947-0100 Copyright 2008, Price Pfister, Inc. A COMPANY

More information

B Bedpan Washer Assembly. T&S Brass and Bronze Works, Inc. Travelers Rest, South Carolina

B Bedpan Washer Assembly. T&S Brass and Bronze Works, Inc. Travelers Rest, South Carolina B-0676 Bedpan Washer Assembly 1 Asm, Vacuum Breaker B-0929 2 Elbow, Cast Round, 3/8" 001355-40 3 Vacuum Breaker B-0968 4 Nipple 000355-40 5 Nipple 002535-25 6 Asm, Faucet Flange 009523-40 7 Outlet, Wall

More information

Installation Guide. Single-Control Kitchen Sink Faucets

Installation Guide. Single-Control Kitchen Sink Faucets Installation Guide Single-Control Kitchen Sink Faucets K-6352 K-6353 M product numbers are for Mexico (i.e. K-12345M) Los números de productos seguidos de M corresponden a México (Ej. K-12345M) Français,

More information

FLAIR TWO-HANDLE BATH & SHOWER FAUCET

FLAIR TWO-HANDLE BATH & SHOWER FAUCET INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN NOTES CAUTION: Risk of product damage. Remove plaster guards, valve units, and aspirator before you apply heat to yoke. Shut off the main water supply. Observe

More information

48-CB Series. Serie 48-CB Série 48-CB. Lavatory Faucet Grifo Para El Baño Robinet Pour Lavabo

48-CB Series. Serie 48-CB Série 48-CB. Lavatory Faucet Grifo Para El Baño Robinet Pour Lavabo 48-CB Series Serie 48-CB Série 48-CB Lavatory Faucet Grifo Para El Baño Robinet Pour Lavabo 12-14-04 EO6784L 29483-0100 Copyright 2004, Price Pfi ster, Inc. COMPNY Thank you for purchasing this Price Pfi

More information

Oletto Single Lever Commercial Style Kitchen Faucet

Oletto Single Lever Commercial Style Kitchen Faucet INSTALLATION MANUAL Oletto Single Lever Commercial Style Kitchen Faucet KPF-2630 www.kraususa.com I toll free: 1.800.775.0703 I 2014-2015 Kraus USA Inc. I RV. March 30, 2017 Thank you for your purchase

More information

Form No.: LITPLUMBPAK1/2007AD 2005 Plumb Pak Printed in the U.S.A.

Form No.: LITPLUMBPAK1/2007AD 2005 Plumb Pak Printed in the U.S.A. Catalog Addendum Table of Contents CONTENTS Table of Contents Brass Drainage...2 Plastic Drainage...3 Strainers...5 Bath Drains...6 Water Supplies...7 Sink & Faucet...9 Hose & Fittings...8 Bathroom Accessories...9

More information

SHOWER CONVERSION KIT WITH HAND SHOWER

SHOWER CONVERSION KIT WITH HAND SHOWER SHOWER CONVERSION KIT WITH HAND SHOWER BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for any damage

More information

INSTALLATION GUIDELINES

INSTALLATION GUIDELINES IMPORTANT: To ensure this product is installed properly, you must read and follow these guidelines. The owner/user of this product must keep this information for future reference. This product must be

More information

CORALAIS THREE-HANDLE BATH/SHOWER FAUCET

CORALAIS THREE-HANDLE BATH/SHOWER FAUCET INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN NOTES CAUTION: Risk of product damage. Remove plaster guards, valve units, diverter and diverter sleeve before you apply heat to yoke. Shut off the main water

More information

CROSS HANDLE 5-HOLE BATH SET & PULL-OUT BLACK HAND SHOWER WITH DECK DIVERTER TRIM ONLY, TO SUIT R ROUGH M1-2202

CROSS HANDLE 5-HOLE BATH SET & PULL-OUT BLACK HAND SHOWER WITH DECK DIVERTER TRIM ONLY, TO SUIT R ROUGH M1-2202 INSTALLATION INSTRUCTIONS M-00 CROSS HANDLE -HOLE BATH SET & PULL-OUT BLACK HAND SHOWER WITH DECK DIVERTER TRIM ONLY, TO SUIT R-00 ROUGH M-0 LEVER -HOLE BATH SET & PULL-OUT BLACK HAND SHOWER WITH CROSS

More information

T&S BRASS AND BRONZE WORKS, INC. 2 Saddleback Cove / P.O. Box 1088 Travelers Rest, SC 29690

T&S BRASS AND BRONZE WORKS, INC. 2 Saddleback Cove / P.O. Box 1088 Travelers Rest, SC 29690 Saddleback Cove / P.O. Box 1088 Travelers Rest, SC 9690 REG. #A601 B-0664 Travelers Rest, SC: 800-476-4103 Simi Valley, CA: 800-43-0150 This Space for Architect/Engineer Approval Fax: 864-834-3518 www.tsbrass.com

More information

GoBidet Bidet Attachment

GoBidet Bidet Attachment GoBidet Bidet Attachment 151 Ruths Place #5 Sequim, WA 98382 Tel 1-800-681-0753 Fax +1 360-681-4029 www.go-bidet.com MODEL #2003C In this box: 1 User Manual 1 GoBidet Unit w/ mounting bracket, nut, rubber

More information

Phoenix Parts Breakdown Book

Phoenix Parts Breakdown Book Phoenix Parts Breakdown Book Phoenix Handle 4 and 8 centers Ledge Mount Kitchen, Bar, Galley, Laundry 6 A B 4 5 8 9 0 No. Name Part Noumber 7 Handle Buttons see handle kits page Handle Screws Plastic

More information

COOPER FREESTANDING TUB FAUCET INSTALLATION

COOPER FREESTANDING TUB FAUCET INSTALLATION SKU(s): 940972 COOPER FREESTANDING TUB FAUCET INSTALLATION BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no

More information

SEDONA. Sedona ShowerSpa Model #1041 Owner s Manual

SEDONA. Sedona ShowerSpa Model #1041 Owner s Manual SEDONA Sedona ShowerSpa Model #1041 Owner s Manual Sedona ShowerSpa Model 1041 Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly

More information

J C / Sunshine Sales, Inc Sales: (800) W. 109th Terr Kansas City, Mo K C : (816) Fax: (816)

J C / Sunshine Sales, Inc Sales: (800) W. 109th Terr Kansas City, Mo K C : (816) Fax: (816) Sunshine Tub spouts Mixet Style Diverter Spout Tub Filler Spouts Unique! Mixet Style Diverter Spout 5/8 od Slip Fit Stock # TS132 List Price $ 9.48 1/2 FIP Nose End Stock # TS137 List Price $ 6.68 Pull

More information

Perrin & Rowe Kitchen ROHL Pull-Out/Pull-Down COLORS/FINISHES. Polished Chrome Polished Nickel Satin Nickel English Bronze Inca Brass* 9 1/4

Perrin & Rowe Kitchen ROHL Pull-Out/Pull-Down COLORS/FINISHES. Polished Chrome Polished Nickel Satin Nickel English Bronze Inca Brass* 9 1/4 PERRIN & ROWE TRADITIONAL PULL-DOWN FAUCET Perrin & Rowe Kitchen ROHL Pull-Out/Pull-Down U.4744 FEATURES Brass construction Metal lever CNC machined Dual spray with lock in modes 1 3/4 max installation

More information

Oletto Single Handle Commercial Style Kitchen Faucet

Oletto Single Handle Commercial Style Kitchen Faucet INSTALLATION MANUAL Oletto Single Handle Commercial Style Kitchen Faucet KPF-2631 www.kraususa.com I Toll Free: 1.800.775.0703 I 2017 Kraus USA Inc. I REV. November 20, 2017 Congratulations on the purchase

More information

Crespo Single Lever Pull Down Kitchen Faucet

Crespo Single Lever Pull Down Kitchen Faucet INSTALLATION MANUAL Crespo Single Lever Pull own Kitchen aucet KP-2720 www.kraususa.com I toll free: 1.800.775.0703 I 2014-2015 Kraus USA Inc. I RV. August 25, 2015 Thank you for purchasing Kraus We would

More information

T&S BRASS AND BRONZE WORKS, INC.

T&S BRASS AND BRONZE WORKS, INC. Saddleback Cove / P.O. Box 088 Travelers Rest, SC 9690 BL-570-08 Travelers Rest, SC: 800-76-03 Simi Valley, CA: 800-3-050 Fax: 86-83-358 www.tsbrass.com 7 /" This Space for Architect/Engineer Approval

More information

Mateo Single Lever Pull Out Kitchen Faucet

Mateo Single Lever Pull Out Kitchen Faucet INSTALLATION MANUAL Mateo Single Lever Pull Out Kitchen aucet KP-2610 www.kraususa.com I toll free: 1.800.775.0703 I 2014-2015 Kraus USA Inc. I RV. August 26, 2015 Thank you for purchasing Kraus We would

More information

Instructional Booklet

Instructional Booklet Instructional Booklet 936-894-3292 Thank you for choosing The Bathmaster! You are on your way to creating an unmatched bathing experience both for you and the lucky animal. The Bathmaster is designed to

More information

7. Do not dispose of the packaging immediately.the package insert contains a template for mounting the slide bar A/Rev01 G1/2" G1/2" G1/2"

7. Do not dispose of the packaging immediately.the package insert contains a template for mounting the slide bar A/Rev01 G1/2 G1/2 G1/2 INSTALLATION INSTRUCTIONS Magnetic Slide Shower 550 552 BEFORE YOU BEGIN MAGNETIC SLIDE SHOWER All information is based on the latest product information available at the time of publication. Kohler Co.

More information

VEPR Round Drum Disassembly and Assembly

VEPR Round Drum Disassembly and Assembly VEPR 12 25 Round Drum Disassembly and Assembly Required Tools ¼ Allen Wrench Flat Head Screwdriver Drum Parts List Drum Body Carousel Center Bolt Dummy Rounds Carousel Lock Spring Clear Drum Cover Step

More information

service parts STYLE OPLS06 Opus Low Profile Three Hole Deck Mounted Lavatory Faucet with Crystal Egg Handles

service parts STYLE OPLS06 Opus Low Profile Three Hole Deck Mounted Lavatory Faucet with Crystal Egg Handles service parts STYLE OPLS02 Opus Low Profile Three Hole Deck Mounted Lavatory Faucet with Crystal Egg Handles STYLE OPLS05 Opus Low Profile Three Hole Deck Mounted Lavatory Faucet with Metal Lever Handles

More information

Oletto Single Lever Pull Down Kitchen Faucet

Oletto Single Lever Pull Down Kitchen Faucet INSTALLATION GUIE Oletto Single Lever Pull own Kitchen aucet KP-2620 www.kraususa.com I Toll ree: 1.800.775.0703 I 2018 Kraus USA Inc. I REV. January 24, 2018 Congratulations on the purchase of your new

More information

Gas Go Anywhere /23/01

Gas Go Anywhere /23/01 Gas Go Anywhere 55014 02/23/01 FOR OUTDOOR USE ONLY This grill does not include an LP fuel tank. Check Package Contents You should have received the parts listed below. While we give much attention to

More information

Kauai III ShowerSpa MODEL # 1011-III-CH, 1011-III-BN, 1011-III-ORB GENERAL DESCRIPTION PRODUCT FEATURES SPECIFICATIONS

Kauai III ShowerSpa MODEL # 1011-III-CH, 1011-III-BN, 1011-III-ORB GENERAL DESCRIPTION PRODUCT FEATURES SPECIFICATIONS Kauai III ShowerSpa MODEL # 1011-III-CH, 1011-III-BN, 1011-III-ORB GENERAL DESCRIPTION The PULSE ShowerSpas Kauai III replaces your old showerhead with an elegant rain showerhead and multifunction handheld

More information

Advantage Plus TIM-3600 Series Reel

Advantage Plus TIM-3600 Series Reel Read the following precautions and instructions before you begin assembly or using. Failure to comply with these instructions could result in personal injury or property damage. Keep these instructions

More information

APPENDIX A LIGHT SOURCE

APPENDIX A LIGHT SOURCE APPENDIX A LIGHT SOURCE GASOLINE LANTERN One source of artificial light for the field kitchen is the gasoline lantern (NSN 6260-00-170-0430). It is a one-mantle lantern with a heat-resistant globe or globe

More information

300 ft. 5/8 Hose wagon

300 ft. 5/8 Hose wagon 300 ft. 5/8 Hose wagon Model 95956 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. (Garden hose is not included).

More information

Urea/Adblue Hose Reel

Urea/Adblue Hose Reel www.scintex.com.au sales@scintex.com.au Model: SHR3408 Urea/Adblue Hose Reel Product Manual Specifications Spring driven drum: for automatic rewind. Locking ratchet: to maintain the desired length of hose

More information

Hose Reel Series L701/G701

Hose Reel Series L701/G701 Hose Reel Series L70/G70.0 WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal

More information

TITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V

TITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V TITAN pt. no.: 02 0000 0128 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended

More information

ADDED PROTECTION FOR SLIDE-OUT ROOMS. Installation. Introduction... 2 Product Overview...2 Component Checklist...3

ADDED PROTECTION FOR SLIDE-OUT ROOMS. Installation. Introduction... 2 Product Overview...2 Component Checklist...3 CAREFREE SIDEOUT KOVER II RV Installation ADDED PROTECTION FOR SLIDE-OUT ROOMS TABLE OF CONTENTS SOKII Shown with Full Case Option Introduction... 2 Product Overview...2 Component Checklist...3 Installation...

More information

Brooks Fire Pit Table. Installation Instructions for Brooks Fire Pit Table BRK-1224

Brooks Fire Pit Table. Installation Instructions for Brooks Fire Pit Table BRK-1224 Brooks Fire Pit Table Installation Instructions for Brooks Fire Pit Table BRK-1224 1 IMPORTANT Contents Please consult your Crystal Fire instruction manual for detailed instructions Required and important

More information

Gosford Aquifier (Pre 2009) Replace O-rings here

Gosford Aquifier (Pre 2009) Replace O-rings here Gosford Aquifier (Pre 2009) Replace O-rings here Gosford Aquifier (Pre 2009) General Advice: These instructions are intended as a guide only, if you are in any doubt you should seek the advice of a qualified

More information

Stonefire Fire Pit Table. Installation Instructions for SF-32-K

Stonefire Fire Pit Table. Installation Instructions for SF-32-K Stonefire Fire Pit Table Installation Instructions for SF-32-K / 1 2 IMPORTANT Please consult your Crystal Fire instruction manual for detailed instructions and important information related to the burner

More information

Type N550 Packing Removal/Replacement

Type N550 Packing Removal/Replacement Instruction Manual MCK-1155 Type N550 April 1981 Type N550 Packing Removal/Replacement! WARNING Only qualified servicemen should attempt to repair these valves. The skill required is similar to the complexity

More information

Contents. Introduction...3 Description...3. Pack Contents...4. Rada Heavy Duty EV Shower Fittings Right Angled Connector (RAC)...

Contents. Introduction...3 Description...3. Pack Contents...4. Rada Heavy Duty EV Shower Fittings Right Angled Connector (RAC)... SHOWER FITTINGS PRODUCT MANUAL IMPORTANT Installer: This manual is the property of the customer and must be retained with the product for maintenance and operational purposes. Contents Introduction...3

More information

Vanagon Ladder Kit Assembly & Installation Instructions

Vanagon Ladder Kit Assembly & Installation Instructions Rocky Mountain Westy Vanagon Ladder Kit Assembly & Installation Instructions Introduction Thank you for purchasing the Rocky Mountain Westy Vanagon Ladder Kit. We pride ourselves in the products we develop

More information

PARTS LIST EXTRACTOR ACCESSORIES

PARTS LIST EXTRACTOR ACCESSORIES PARTS LIST EXTRACTOR ACCESSORIES 3 - JET WAND - 4097101 101 4097961 HANDLE ASSEMBLY - INCLUDES: 1 102 9121210 1/4-20 X 5/8 HEX BOLT 2 103 ---------- HANDLE CLAMP 1 104 9120920 1/4-20 HEX NUT 2 105 9120777

More information

Aquastream. Thermo. Thermostatic integral power shower. Installation guide. Aquastream Thermo installation instructions Page 1

Aquastream. Thermo. Thermostatic integral power shower. Installation guide. Aquastream Thermo installation instructions Page 1 Aquastream Thermo Thermostatic integral power shower Installation guide Aquastream Thermo installation instructions Page 1 Aquastream Thermo Aquastream Thermo Thermostatic integral power shower Satin chrome

More information

ASSEMBLY GUIDE. Customer Service: INCH² 2-BURNER & 864 INCH² 2-BURNER

ASSEMBLY GUIDE. Customer Service: INCH² 2-BURNER & 864 INCH² 2-BURNER ASSEMBLY GUIDE 688 INCH² 2-BURNER & 864 INCH² 2-BURNER DANGER If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flames. 3. Open lid. 4. If odor continues, keep away from the appliance

More information

WHAT TO KNOW BEFORE INSTALLING...

WHAT TO KNOW BEFORE INSTALLING... WL600922H WL601022H WL601122H WL502086H WL602376H WL602322H Please read the information sheet before proceeding. WHAT TO KNOW BEFORE INSTALLING... 1. 2. When positioning the seat onto the pan ensure that

More information

B-0107-C REPAIR PARTS KIT

B-0107-C REPAIR PARTS KIT Job Name: T&S BRASS AND BRONZE WORKS, INC. SADDLEBACK COVE / P.O. BOX 0 / TRAVELERS REST, SC 0 PHONE 00--0 FAX -- REG. #A0 ISO #00 Architect/Engineer Approval: Model No. Item No. B-0K-C Notes: 000-000-

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Pictures in this manual are shown with the optional visual display indicator installed on the filter. BLUE FLAME & BLUE FLAME II MAXX LP FILTER KIT (423-375-001A) SHIVVERS SHIVVERS

More information

Genesis. Side Burner Accessory Installation. Step 3. Step 1. Step 2. For use with Genesis Gas Barbecues Only

Genesis. Side Burner Accessory Installation. Step 3. Step 1. Step 2. For use with Genesis Gas Barbecues Only Genesis Side Burner Accessory Installation For use with Genesis Gas Barbecues Only Step 1 WARNING: All gas controls and supply valves should be in the OFF position. You will need: Side burner assembly

More information

black black black black black black black black White Kitchen Spray Head Spray Head Brushed Nickel 4' Hose with Kitchen Spray Head Kitchen Spray Head

black black black black black black black black White Kitchen Spray Head Spray Head Brushed Nickel 4' Hose with Kitchen Spray Head Kitchen Spray Head 788-422 Kitchen Spray Head 788-4220BN 7 1 /2 x 4 x 1 1 /4 Spray Head Brushed 788-4221 White Kitchen Spray Head 788-4224 540-0053 4' Hose with Kitchen Spray Head 788-4222BN 9 3 /4 x 7 x 1 3 /4 Spray Head

More information

T&S BRASS AND BRONZE WORKS, INC. 2 Saddleback Cove / P.O. Box 1088 Travelers Rest, SC 29690

T&S BRASS AND BRONZE WORKS, INC. 2 Saddleback Cove / P.O. Box 1088 Travelers Rest, SC 29690 Saddleback Cove / P.O. Box 088 Travelers Rest, SC 9690 REG. #A60 B-0650-0 Travelers Rest, SC: 800-476-403 Simi Valley, CA: 800-43-050 Fax: 864-834-358 www.tsbrass.com This Space for Architect/Engineer

More information

T&S BRASS AND BRONZE WORKS, INC.

T&S BRASS AND BRONZE WORKS, INC. Saddleback Cove / P.O. Box 0 Travelers Rest, SC 60 B-07-PA Travelers Rest, SC: 00-476-403 Simi Valley, CA: 00-43-050 Fax: 64-34-35 www.tsbrass.com This Space for Architect/Engineer Approval Job Name Date

More information

Crespo Single Lever Pull Down Kitchen Faucet

Crespo Single Lever Pull Down Kitchen Faucet NSTALLATON U Crespo Single Lever Pull own Kitchen aucet KP-2720 www.kraususa.com Toll ree: 1.800.775.0703 2017 Kraus USA nc. RV. August 8, 2017 Congratulations on the purchase of your new Kraus plumbing

More information

For draining expansion tanks, other liquid storage vessels.

For draining expansion tanks, other liquid storage vessels. Plumbing Specialties 26-100 & 26-300 SERIES COMPRESSION GAUGE COCKS For draining expansion tanks, other liquid storage vessels. 26-100: rated up to 125 psig 26-300: soft metal seat/stuffing box rated up

More information

Color Light Streams Lighted Bubbler Spillway Pot (CLSDLP) Installation Manual

Color Light Streams Lighted Bubbler Spillway Pot (CLSDLP) Installation Manual Color Light Streams Lighted Bubbler Spillway Pot (CLSDLP) Installation Manual 27.75 23.75 25.50 20.75 Specifications: 8-13 GPM 12-14 VAC only (Class 2 transformer required) 3W max. 100 ft. cord, conduit

More information

INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL AWNINGS. For trailers & motor homes with straight sides TOOLS REQUIRED

INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL AWNINGS. For trailers & motor homes with straight sides TOOLS REQUIRED AWNINGS INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL For trailers & motor homes with straight sides TOOLS REQUIRED 1/4" electric drill Ratchet handle kit 3/8" & 7/16" socket No. 1 and No. 2 screwdriver

More information

Installation Instructions Traditional Awnings in a box Classic Awnings in a Box

Installation Instructions Traditional Awnings in a box Classic Awnings in a Box Installation Instructions Traditional Awnings in a box Classic Awnings in a Box Basic Tools Required (not included) Tape Measure & Pencil Level Phillips Screwdriver Drill with ¼ bit (Cement or Masonry

More information

The Waste Electrical and Electronic Equipment (Producer Responsibility) Regulation 2004

The Waste Electrical and Electronic Equipment (Producer Responsibility) Regulation 2004 Aquastream Thermo Thermostatic integral power shower The Waste Electrical and Electronic Equipment (Producer Responsibility) Regulation 2004 This product is outside the scope of the European Waste Electrical

More information

Colonial and Grand Colonial Fire Pit Tables. Installation Instructions for

Colonial and Grand Colonial Fire Pit Tables. Installation Instructions for Colonial and Grand Colonial Fire Pit Tables Installation Instructions for Colonial-48-M-K, Col-48-MNB-K, Grand-Colonial-48-K, CM-48-DIN-K, MNB-48-DIN-K, GC-48-DIN-K, CM-48-PUB-K, MNB-48-PUB-K, GC-48-PUB-K

More information

REPLACEMENT PROCEDURE: ROTISSERIE ORIFICE: TOOLS REQUIRED TO INSTALL THIS KIT: ITEM DESCRIPTION: E C

REPLACEMENT PROCEDURE: ROTISSERIE ORIFICE: TOOLS REQUIRED TO INSTALL THIS KIT: ITEM DESCRIPTION: E C TOOLS REQUIRED TO INSTALL THIS KIT: ITEM DESCRIPTION: A SCREWDRIVER - PHILIPS SIZE # 2 B SCREWDRIVER - FLAT 1/8 WIDE TIP C 1/2 WRENCH - OPEN TYPE D 7/16 WRENCH - OPEN TYPE E RATCHETING SOCKET WRENCH -

More information

Assembly TOOLS REQUIRED: 17mm and 14mm or equivalent wrenches.

Assembly TOOLS REQUIRED: 17mm and 14mm or equivalent wrenches. Instructions for 3 Trimmer Rack, 3TR* *Patents Pending Assembly TOOLS REQUIRED: 17mm and mm or equivalent wrenches. 15 26 26 16 15 16 Attach the lower mounting brackets to the Trimmer Rack poles as shown

More information

Model 205 Fireview Maintenance Kit

Model 205 Fireview Maintenance Kit Model 205 Fireview Maintenance Kit Please read all of the instructions before you begin the procedure. Confirm that you have all the necessary tools and parts required. Allow about one hour to complete

More information

Assembly/Installation/Use Instructions:

Assembly/Installation/Use Instructions: IMPORTANT We highly recommend that our products be installed and serviced by professionals who are certified in the U.S. by NFI (National Fireplace Institute) or in Canada by WETT (Wood Energy Technical

More information

NEWMAR SERVICE SCHOOL

NEWMAR SERVICE SCHOOL NEWMAR SERVICE SCHOOL TRAINING INFORMATION GUIDELINE FOR FEBRUARY 2013 OUR PRODUCTS: NOVA DUAL PITCH AWNING G-2000/ G-1500 2 P a g e G-2085 G-5000 3 P a g e G-LINKS 4 P a g e NOVA/ G-2000/ G-1500 BASIC

More information

D & L SUPPLY and MANUFACTURING THE PARTS PEOPLE WITH YOUR SOLUTION. Acorn Shower-ware

D & L SUPPLY and MANUFACTURING THE PARTS PEOPLE WITH YOUR SOLUTION. Acorn Shower-ware 2A-1 Acorn Shower-ware Item Partno Description Item Partno Description 1 350400 Auto-Cloz Cart. 2 350401 Pushbutton Chrome 3 350402 Set Screw 4 350403 Bonnet Chrome 6 350404 Back up O-ring 7 350405 O-ring

More information

300 Model 870 Four Wheel Hose Cart Owner s Manual

300 Model 870 Four Wheel Hose Cart Owner s Manual 300 Model 870 Four Wheel Hose Cart Owner s Manual IMPORTANT: READ THE OWNER S MANUAL BEFORE ASSEMBLING TOOLS REQUIRED: TWO ADJUSTABLE WRENCHES; HAND PUMP Estimated assembly time: 30 minutes PARTS LIST

More information

ABS Fittings & Pipe. Twin. Price. Elbow. 45 Degree Elbow. Price. 22 Degree. Elbow. Price. 45 Degree Wye. Price. Long Turn Tee Wye.

ABS Fittings & Pipe. Twin. Price. Elbow. 45 Degree Elbow. Price. 22 Degree. Elbow. Price. 45 Degree Wye. Price. Long Turn Tee Wye. Fittings & Pipe 90 Degree Elbow Twin Elbow 1 1/4 112875 2 113046 1 1/2 112876 3 113047 2 112877 3 112878 45 Degree Elbow Street (Hub x Spigot) 1 1/4 112884 1 1/2 112880 1 1/2 112885 2 112881 2 112886 3

More information

Wenger Corporation 2014 Printed in USA 05/14 Part #049B015-09

Wenger Corporation 2014 Printed in USA 05/14 Part #049B015-09 Assembly Instructions Tuba Tamer Contents Important User Information...........................2 Replacemant Parts List..............................3 Assembly.........................................4

More information

T&S BRASS AND BRONZE WORKS, INC.

T&S BRASS AND BRONZE WORKS, INC. Saddleback Cove / P.O. Box 1088 Travelers Rest, SC 9690 B-0301 Travelers Rest, SC: 800-476-4103 Simi Valley, CA: 800-43-0150 Fax: 864-834-3518 www.tsbrass.com This Space for Architect/Engineer Approval

More information

INFRARED BURNER KIT INSTRUCTIONS

INFRARED BURNER KIT INSTRUCTIONS 6 4 3 2 INFRARED BURNER KIT INSTRUCTIONS 1 Model # 3049 (A790, A660, & A530) Model # 3051 (A540, & A430) Included parts 5 NOTE: This unit has been retrofi tted with an infrared burner. PARTS INCLUDED 1.

More information

FLEX KEY ASSEMBLY. ..._ o RAFTER ARM TUBE MAIN ARM TUBE CAP NUT CLAW HINGE

FLEX KEY ASSEMBLY. ..._ o RAFTER ARM TUBE MAIN ARM TUBE CAP NUT CLAW HINGE ZIP DEE Inc. 96 Crossen Ave. Elk Grove Village, IL 60007(847)437-0980 (800)338-2378 HEAD CASTING AWNING RAIL FLEX KEY ASSEMBLY..._ o GM1 Installation Instruction GMC Motorhome RAFTER ARM TUBE MAIN ARM

More information

Operating Instructions

Operating Instructions Operating Instructions Medium and High Pressure Model Numbers: RT602- RT635- RT602- RT635- RT603- RT650- RT603- RT650- RT605- RT825- RT605- RT650-SM RT802- RT835- RT425- RT803- RT402- RT435- RT625- RT403-

More information

FEATURES & BENEFITS OF THE TOW PRO LITE :

FEATURES & BENEFITS OF THE TOW PRO LITE : To Protect & Preserve PRODUCT MANUAL & FITTING GUIDE tow pro lite TYPE: SEMI - FIT EACH TOW PRO LITE COMES WITH THE FOLLOWING : 16 side securing straps & buckles (8 either side) 1 HITCH STRAP & buckles

More information

Honda Ridgeline Installation Instructions

Honda Ridgeline Installation Instructions Honda Ridgeline Installation Instructions READ THIS... If you read these instructions from beginning to end before starting you will probably not need to look at them again during the installation, but

More information

RAFTER VI. Installation and Operation CAREFREE WITH AUTOMATIC AWNING SUPPORT. RV Accessory PRODUCT OVERVIEW

RAFTER VI. Installation and Operation CAREFREE WITH AUTOMATIC AWNING SUPPORT. RV Accessory PRODUCT OVERVIEW CAREFREE RAFTER VI RV Accessory WITH AUTOMATIC AWNING SUPPORT Installation and Operation PRODUCT OVERVIEW The gives the awning user the ability to easily tighten the center fabric when the awning is extended.

More information

VALORE SEVEN. Serial Number. Pacific) Version No.:V

VALORE SEVEN. Serial Number. Pacific) Version No.:V VALORE SEVEN Version No.:V.206222 Serial Number Pacific) 7 9 8 " 5 8 " " 7 2 8 " 26 2 " 7 8 " 9" 2 8 " 2 8 " (H) 26.9" x (W) 8.26" x (D) 8.85" Hand shower hose: 59.05" Weight: Net: 0 lbs /Gross: 2 lbs

More information

WRANGLER 1710AB, 2010AB

WRANGLER 1710AB, 2010AB WRANGLER 1710AB, 2010AB WIRING DIAGRAM ITEM PART NO. DESCRIPTION QTY 1 1393251 WIRE ASSEMBLY - CIRCUIT BREAKER TO BRUSH SWITCH 1 2 1393261 WIRE ASSEMBLY - CIRCUIT BREAKER TO VACUUM SWITCH 1 3 1393271 WIRE

More information

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS. Part # A7006

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS. Part # A7006 IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS Part # A7006 Parts List Wobble Stopper Body Wobble Stopper Shaft Camper Bracket Lower Bracket Assembly Upper Bracket Upper Bracket Clamp 3/8 SAE Flat

More information

* * KR54-F, KR9854 & KR9954 Installation Instructions. Read All Warnings Before Starting Installation! Index:

* * KR54-F, KR9854 & KR9954 Installation Instructions. Read All Warnings Before Starting Installation! Index: *941061-00* 941061-00 Keyed Removable Mullion KR54-F, KR9854 & KR9954 Installation Instructions CLASSIFIED CLASSIFIED C Read All Warnings Before Starting Installation! Index: General Information ----------------

More information

T&S BRASS AND BRONZE WORKS, INC.

T&S BRASS AND BRONZE WORKS, INC. Saddleback Cove / P.O. Box 088 Travelers Rest, SC 9690 BL-5707-0 Travelers Rest, SC: 800-476-403 Simi Valley, CA: 800-43-050 Fax: 864-834-358 www.tsbrass.com 3 /4" 8mm This Space for Architect/Engineer

More information

FREEDOM BUTTON KIT INSTALLATION GUIDE STEP 1

FREEDOM BUTTON KIT INSTALLATION GUIDE STEP 1 FREEDOM BUTTON KIT INSTALLATION GUIDE Installation of the Freedom Button kit is very simple and similar to the installation of a standard rear takedown pin and bolt catch latch. Before installing your

More information

Solera Classic Awning OEM INSTALLATION MANUAL

Solera Classic Awning OEM INSTALLATION MANUAL Solera Classic Awning OEM INSTALLATION MANUAL TABLE OF CONTENTS System and Safety Information 2 Preparation 3 Resources Required 3 Installation 3 Installing the Awning Rail (If Necessary) 3 Assembling

More information

CONVEX Awning Instructions

CONVEX Awning Instructions CONVEX Awning Instructions IMPORTANT NOTE: Please take a few minutes to become familiar with this entire document BEFORE beginning your installation. The time you spend doing this is well spent and will

More information

T&S BRASS AND BRONZE WORKS, INC.

T&S BRASS AND BRONZE WORKS, INC. T&S BRASS AND BRONZE WORKS, INC. Saddleback Cove / P.O. Box 0 Travelers Rest, SC 0 Model No. Item No. B-0K Travelers Rest, SC: 00--0 Simi Valley, CA: 00--00 Fax: -- www.tsbrass.com This Space for Architect/Engineer

More information

BERYL Service Guide. Travel Adjust OTT Change

BERYL Service Guide. Travel Adjust OTT Change BERYL Service Guide Travel Adjust OTT Change SERVICE OVERVIEW This manual will guide you step by step performing a travel adjust and OTT setting change to your Beryl suspension fork. Please follow each

More information

Instructions for use

Instructions for use Instructions for use Index ENGLISH I. Congratulations Page 3 II. Quality from the very start Page 4 III. Important notes Page 15 IV. BRITA, quality and satisfaction guaranteed Page 16 Installation Video

More information

Operating Instructions

Operating Instructions Operating Instructions Series RT Spring Driven Hose Reels Low Pressure Model Numbers: RT402-OLP RT605-OLP RT450-OLP RT835-OLP RT403-OLP RT802-OLP RT465-OLP RT850-OLP RT405-OLP RT803-OLP RT625-OLP RT450-OLPSM

More information

THE EDGE12 SLICER. MODEL EDGE12-2 (220/50/1 voltage) FORM (July 2012) EDGE12 SLICER

THE EDGE12 SLICER. MODEL EDGE12-2 (220/50/1 voltage) FORM (July 2012) EDGE12 SLICER EDGE12 SLICER THE EDGE12 SLICER MODEL EDGE12-1 (120/60/1 voltage) EDGE12-2 (220/50/1 voltage) ML-136246 ML-136247 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com FORM 35283 (July

More information

Installation. Introduction... 2 Product Overview...2 Component Checklist...3

Installation. Introduction... 2 Product Overview...2 Component Checklist...3 CAREFREE SIDEOUT KOVER II RV WITH MANUAL LOCK Installation TABLE OF CONTENTS Introduction... 2 Product Overview...2 Component Checklist...3 Installation... 4 Installing the Mounting Brackets...4 Assemble

More information

80070 TOP MOUNT CAMPER SHELL and TRANSIT CONNECT RACK TMCS_3:1

80070 TOP MOUNT CAMPER SHELL and TRANSIT CONNECT RACK TMCS_3:1 ASSEMBLY INSTRUCTIONS for : 80070 TOP MOUNT CAMPER SHELL and TRANSIT CONNECT RACK TMCS_3:1 (916) 638-8703 (800) 343-7486 11261 Trade Center Drive Rancho Cordova, CA 95742 www.kargomaster.com Transit ASSEMBLY

More information

LITE Spear Awning Instructions

LITE Spear Awning Instructions LITE Spear Awning Instructions IMPORTANT NOTE: Please take a few minutes to become familiar with this entire document BEFORE beginning your installation. The time you spend doing this is well spent and

More information

Reverse Osmosis system 50 GPD Instruction manual EN

Reverse Osmosis system 50 GPD Instruction manual EN Reverse Osmosis system 50 GPD Instruction manual EN Contents 1. Unpacking 2. Scope of supply 3. Insertion of the membranes 4. Connecting the lines 5. Installation 6. First commissioning 7. Consumables

More information

ASSEMBLY GUIDE. Customer Service: INCH² 3-BURNER & 545 INCH² 3-BURNER

ASSEMBLY GUIDE. Customer Service: INCH² 3-BURNER & 545 INCH² 3-BURNER ASSEMBLY GUIDE 455 INCH² 3-BURNER & 545 INCH² 3-BURNER DANGER If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flames. 3. Open lid. 4. If odor continues, keep away from the appliance

More information

TCWS.38NG03.C BLACK DIAMOND BURNER KIT INSTRUCTIONS

TCWS.38NG03.C BLACK DIAMOND BURNER KIT INSTRUCTIONS IMPORTANT: THESE INSTRUCTIONS ARE TO REMAIN WITH THE HOMEOWNER These instructions are supplementary to the Installation and Operating Instructions supplied with the fireplace and should be kept together.

More information

EarthWay Flex-Select Setup and Calibration Techniques

EarthWay Flex-Select Setup and Calibration Techniques EarthWay Flex-Select Setup and Calibration Techniques How to Install a Tray First ensure the hopper is clean and there is no debris trapped around the tray mounting area. Secondly install the Pivot Rod

More information