Tender: 2015 PRODUCTION MODEL CLASS VII MOTOR GRADER ADDENDUM #2 Monday, May 25, 2015

Transcription

1 Tender: 2015 PRODUCTION MODEL CLASS VII MOTOR GRADER ADDENDUM #2 Monday, May 25, 2015 Page 2, Current Production Model Class VII Motor Grader Changes Read 2015 Production Model Class VII Motor Grader Page 4, Under Trade In Section There is a trade in of a 2002 G740 Series Volvo Road Grader, complete with a one-way snow plow and wing from the Municipality of North Perth Changes Read REMOVED G740 Series VOLVO Road Grader is no longer available for trade in. Page 7, Under Make & Model Section Model Year Changes Read 2015 Model Year Page 15, Under Plow Attachments Section Viking 135 HSE 10 ft. one way plow C/W hydraulic tilt cylinder with quick attach hose couplers and parts manual (or Craig Equivalent) Changes Read - Viking 135 HSE 10 ft. One Way plow C/W hydraulic tilt cylinder with quick attach hose couplers, carbide edge backer, carbide shoe, safety cable, rubber flap and parts manual (or Craig Equivalent) These are the changes that were made to Addendum #1 Current Production Model Class VII Motor Grader. Attached to this letter is the Addendum # Production Model Class VII Motor Grader Tender package with the changes. If you have any further questions, please contact the appropriate personnel on page 5 of this tender. Please sign and fax back this letter to to confirm receipt of new package. Thank you for your co-operation Signature of Contractor

2 THE MUNICIPALITIES OF NORTH PERTH, SOUTH BRUCE & HURON EAST TENDER 2015 PRODUCTION MODEL CLASS VII MOTOR GRADER ARTICULATED ALL WHEEL DRIVE MODEL COMPLETE WITH ONE WAY SNOW PLOW AND WING READY FOR OPERATION ADDENDUM #2 Issued on May 22, 2015 The Municipalities of North Perth, South Bruce and Huron East are each interested in purchasing a new Current Production Model Class VII Motor Grader Articulated All Wheel Drive Model complete with one way snow plow and wing ready for operation. SCOPE OF WORK It is the intent of The Municipalities of North Perth, South Bruce and Huron East to each purchase a new current production model grader complete with snow plow equipment for use within the respective municipalities. The vehicle s intended use is for snow and ice removal in winter months and road grading, constructing, and ditching during the summer months. 2

3 1. SUBMISSION OF TENDERS INFORMATION TO BIDDERS Sealed Tenders, clearly marked as to contents, will be received at the North Perth Municipal Office by: Becky Richardson Cashier/Receptionist Municipality of North Perth 330 Wallace Ave N Listowel, ON N4W 1L3 until 12:00:00 o clock noon on Wednesday, June 3, 2015 Tenders must be clearly marked 2015 Grader Tender - Attention Becky Richardson. 2. TENDERS Shall be submitted only on the original forms provided. All bidders shall submit sealed envelopes clearly labeled with the following: Tender Name Name of Firm Submitting Bid Address of Firm Submitting Bid Signature of authorized representative of the Bidder 3. TENDER OPENING PROCEDURE Following tender closing at 12:00:00 Noon, the tenders will be opened publicly and tendered prices will be recorded. 4. REJECTION OF TENDERS Tenders may be rejected for any one of the following reasons: a) Bids received after the tender closing date and time b) Bids received on other than the supplied original tender forms c) Bids not completed in ink or by typewriter d) Incomplete Bids e) Bids not properly signed and sealed f) Bids which do not meet all technical requirements of the tender. 5. BID PRICE The bidder shall enter the total price in the applicable location on the Form of Tender. 3

4 6. TAX Harmonized Sales Tax (HST) The unit price quoted shall not include the HST. The HST should be shown in the applicable location on the Form of Bid. 7. DELIVERY DATE The bidder shall clearly indicate in the appropriate location on the Form of Tender the delivery date of the complete unit as specified in the Tender. 8. REGULATORY COMPLIANCE The bidder shall ensure unit as provided to the Municipality meets all current applicable industry and regulatory standards, codes and regulations. In the event that the unit specification which forms a part of this tender document would result in a noncompliance with applicable industry and regulatory standards, codes, and regulations, the bidder shall notify the Municipality in writing of the non-compliance and provide suggestions for modifications (including price) to achieve regulatory compliance. 9. UNIT SPECIFICATIONS Unit specifications provided in the Municipality s tender documents are based upon manufacturer s published specifications. As stated in the Section entitled Rejection of Tenders, bids which do not meet all specifications in the Municipality s tender documents will be rejected. 10. TRADE IN There is no trade in for the Municipality of North Perth. There is a trade in of a 1993 Champion 740 Grader, complete with plow and wing from the Municipality of South Bruce. There is a trade in of a 1993 Champion 740 Grader, complete with mid-mount scarifier from the Municipality of Huron East, available for viewing at the Huron East North Patrol Shed at Newry Road. 11. RIGHT TO ACCEPT OR REJECT TENDERS The Municipalities of North Perth, South Bruce and Huron East reserve the right to reject any or all bids for any reason whatsoever. Lowest or any tender will not necessarily be accepted. Tender is subject to Council approval. Although this is a joint tender process, each Municipality reserves the right to accept or reject the respective tender independently. 4

5 12. PREPARATION OF SPECIFICATIONS AND QUESTIONS The specifications for the Equipment have been prepared by the Municipality of North Perth, South Bruce & Huron East Public Works Department. Questions with respect to the Equipment in the Municipality of North Perth are to be directed to Jamie Morgan, Manager of Operations at (519) Questions with respect to the Equipment in the Municipality of South Bruce are to be directed to Adam Weishar, Manager of Operations at (519) Questions with respect to the Equipment in the Municipality of Huron East are to be directed to Barry Mills, Public Works Manager at (519) Should a Tenderer find discrepancies, omissions, or ambiguities, or not agree that the materials and methods specified or designed, will provide an installation which meets the requirements of the intended Equipment, he/she shall notify the Municipality prior to the Tender opening date. The Municipality may choose to issue a written addendum. Addenda issued during the tendering period will be allowed for by the Tenderer in submitting his Tender. If you wish to submit a tender please contact any of the contact names listed above. This will ensure all necessary addendums will be received. 5

6 HEAVY DUTY MUNICIPAL MOTOR GRADER SPECIFICATION These are the known makes and models, which, with the proper equipment, will comply with the following specifications. Other makes/models meeting tender specifications may be bid on at the tenderers discretion. MAKE MODEL ENGINE CATERPILLAR 140M2 AWD 9.3 Litre with cross slope JOHN DEERE 772GP AWD 9.0 Litre Grade pro GENERAL SPECIFICATION AND CONFIRMATION MUNICIPAL MOTOR GRADER This specification covers a motor grader used in the maintenance of highways and municipal roads. This specification covers only the major details of a unit. It is the supplier s responsibility to deliver a fully equipped unit with compatible components to provide dependable, efficient service. Nomenclature shall be to SAE Standard J870 unless otherwise stated. Units shall be supplied only with graders standard or advertised optional engine. Graders with non-advertised or altered engine horsepower settings will not be accepted. Only currently advertised and factory approved engine and drive train combinations are acceptable. PROPOSED UNITS MUST COMPLY WITH THE FOLLOWING SPECIFICATIONS IN ALL ASPECTS. ALTERNATIVE COMPONENTS, WHICH MEET THE REQUIREMENTS OF THIS SPECIFICATION BUT ARE NOT IDENTIFIED IN THE SPECIFICATION, MUST BE APPROVED BY THE PURCHASER PRIOR TO PROPOSAL CLOSING. 6

7 SPECIFICATION: CONFIRMATION: 1. MAKE & MODEL Specify the make, model and year of unit being proposed Specify Make: Specify Model: Tier Model Year Yes: No: SPECIFICATION: CONFIRMATION: 2. WEIGHT The basic operating weight of the unit, without attachments, or auxiliary ballast shall not be less than 17,917 kg (39,000 lbs) Weight on the rear tandem wheels of the grader Yes: No: as above shall be 11,793 kg (26,000lbs) 3. ENGINE The engine shall be diesel, 4-stroke cycle, turbo-charged. Yes: No: Tier lll compliant and 9 litre (Minimum). Engine shall be a minimum of 260 net hp at rated RPM Yes: No: in highgears. Hydraulic driven, reversible, variable speed fan, adjusts Yes: No: speed for cooling requirements The engine peak torque output shall be 900ft/lbs minimum within the rated RPM s in the upper gears 4. PERFORMANCE Maximum net rim pull shall be developed at a road speed less than 2 m.p.h. (rim pull is calculated as total base rear weight x.9 friction factor) Blade Down Force (pressure) capability (at base weight) Forward ground speeds at engines rated RPM and 17.5 x 25 tires Low gear High gear Rimpull: Speed: 7

8 5. ENGINE EQUIPMENT: The following equipment to be supplied: A removable element oil filter Yes: No: Electrical fuel priming system Yes: No: Engine service compartment lights Yes: No: SPECIFICATION: CONFIRMATION: Engine fluid sampling valves Yes: No: Rotary Pre cleaner and Air Filter two-stage, dry element, Yes: No: ejector, and a restriction indicator, which is clearly visible from the cab. Spin on type filters Battery(s) maintenance free, 12 volt, combined CCA rating of (2800) Block Heater, 1500 watt, minimum A brushless alternator with a minimum output of 130 Amperes for a 24 volt system Specify Capacity: Specify Charging: Voltage: Ampere Output: Anti-Freeze to -35 C Yes: No: 6. TRANSMISSION Shall be designed by the manufacturer to match the engine. Yes: No: A direct drive power shift transmission with eight speed forward and six speed reverse minimum Transmission shall have manual shift and auto shift and have travel mode selector Transmission guard to be included. Yes: No: State component used to control inching movement. 7. AXLES: Rear axles tandem drive, oscillating type rear axle. Yes: No: Dual path hydrostatic front wheel drive system effective up to 19 mph(30kph) producing minimum torque of 10,000 lbs/ft of torque 8

9 Automatic differential lock-up feature and in-cab control, Yes: No: actuated on the fly. 8. TIRES Tires shall be a tubeless Radial type Yes: No: SPECIFICATION: CONFIRMATION: Approved tires shall be: Michelin XSnow Plus or Yes: No: Bridgestone Snow Wedge Note: Any other tire must be approved by Purchaser. Size 17.5 x 25 Yes: No: Rim 1 piece to match tires. Yes: No: 4 extra rear rims to be provided Yes: No: (North Perth & South Bruce only) 1 spare front and 1 spare rear rim with mounted tire Yes: No: (Huron East only) 9. STEERING The steering system must provide steering control in case Yes: No: of engine failure 10. FRAME The frame shall be constructed of welded steel members of either box or tubular section, or a combination of these two types. Minimum main frame thickness of top and bottom Yes: No: plate of.86 in. Frame Warranty The frame shall be articulated behind the cab. Yes: No: Remote grease manifold for articulation and tandem sleeves Yes: No: Articulation shall have twin 4.5 hydraulic cylinder, with articulation of 20 o each way minimum, complete with anti-drift lock 9

10 11. R.O.P.S. and F.O.P.S. CAB R.O.P.S. cab shall meet or exceed SAE J1040 standard Yes: No: Weather proof low Profile cab with two operator doors Yes: No: Deluxe, air suspension, six way adjustable seat with headrest Yes: No and armrests 76 mm (3 in.) wide retractable seat belt as per SAE J386. Yes: No: SPECIFICATION: CONFIRMATION: Upholstery cloth Yes: No: Safety Glass tinted safety glass throughout Yes: No: Glass embedded electric rear window defroster Yes: No: Glass embedded electric passenger side lower window defroster Yes: No: Outside ambient air temperature display Yes: No: Remote machine monitoring system to track location, Yes: No: service alerts, theft deterrent and system codes Rear retractable sunshade Yes: No: Windshield wipers with washer front and rear Yes: No: Windshield wipers with washer 2 front lower level windows Yes: No: Right Side Door windshield wiper (must) Yes: No: Front and rear windshield wipers shall be intermittent Yes: No: Electric Horn Yes: No: Heater a fresh air heater to maintain a temperature Yes: No: of 21 C inside the cab with temperature of -45 C outside shall be supplied. The air intake to the heater must be outside the cab. Air to heater from outside must be filtered. Operator convenience package to include; lunch Yes: No: pail holder, cup holder and coat hanger with hold back straps Factory installed air conditioning with cab pressurizer Yes: No: 10

11 (35,000 BTU minimum) Mirrors two heated outside mirrors to be supplied Yes: No: 157 mm x 406 mm (6 x 16 ) approximately to be mounted on the left and right side. Inside 6 x 16 convex mirror to be included Yes: No: Cab lighting illuminated entry, instrument panel lights Yes: No: and dome light with separate switch Visibility dashboard, cab and control panel shall be Yes: No: such as to afford the operator a clear view of the front wheels and blade assembly in all operating positions. Bracket or holder for 2-way radio installation, complete with Yes: No Separate 24 to 12 volt converter, continuous 15 amp output SPECIFICATION: CONFIRMATION: Grab handles for cab entry Yes: No: Sliding side cab windows to be included. Yes: No: Tool Box Yes: No: AM/FM/CD stereo radio Yes: No: One internal cab mounted five pound fire extinguisher Yes: No: 12. NOISE SUPPRESSION The sound level in the cab shall not exceed 72 db (A) Yes: No: as per ISO 6394:1998 (enclosed cab) Specify db(a): 13. CONTROLS: Controls shall be easily operated and shall be conveniently Yes: No: located for operating from a seated position. Electric over hydraulic or full hydraulic Hydraulic controls shall be console mounted with 8 standard Yes: No: and 6 auxiliary functions designed to impart two or more coordinated motions to the blade simultaneously Foot accelerator and handle throttle shall be supplied. Yes: No: 11

12 Hydraulic valving must have proper capacity and flow Yes: No: to operate existing and optional equipment Hydraulic pump capacity to be minimum 207 Ipm 55 gpm Right and left independent float controls for blade Yes: No: Tilt adjustable steering wheel (if supplied) Yes: No: 14. BRAKES Service brakes wet disc type effective on all four wheels Yes: No: of the tandem drive and shall be air or hydraulic power boosted. Back- up system to provide power braking if engine fails. Yes: No: Parking Brake shall operate independently of the service Yes: No: brake system. SPECIFICATION: CONFIRMATION: 15. MOLDBOARD Operating mechanism moldboard operating mechanism Yes: No: shall be power operated. It shall be capable of lifting and lowering (bank sloping 90 ) Yes: No: side shifting and revolving of the moldboard. Cylinder powered, forward tilt moldboard shall be supplied. Yes: No: It shall be possible to side shift the moldboard hydraulically Yes: No: with reference to the blade circle. Stability the mechanism shall be capable of holding the Yes: No: moldboard rigidly in any selected position without chatter, deflection or drift. Heavy duty circle support system with a minimum of 5 Yes: No: guide and clamp plates (must be capable of turning blade when fully loaded) Circle to be protected via overload counterbalance valve or slip clutch. Length shall be 4,267 mm / 13 ft. 12

13 Thickness 25 mm / 0.87 in. minimum Height 686 mm / 27 in. minimum with 8 edge Yes: No: Cutting edge and bolts shall be supplied as per MTO Std. ES-603 Yes: No: Cutting edge (blade) shall be 1 by 4.5 serrated carbide Yes: No: blade in 3 foot and 4 foot sections Moldboard shall be drilled for carbide edges. Drilled to use Yes: No: 5/8 bolts (2 foot, 3 foot and 4 foot sections, all configurations) The moldboard operating mechanism supplied shall include all equipment necessary to allow the moldboard to float when plowing snow. This set up must have been proven in operation and must be such that the moldboard is still fastened to the grader. John Deere twin drive circle gearbox or equivalent SPECIFICATION: SPECIFY SET UP FOR FLOATING MOLDBOARD: Specify circle drive gearbox: CONFIRMATION: 17. LIGHTING AND WIRING All lights as per MTO standards shall be supplied. Yes: No: All lighting shall also confirm to the Ontario Highway Safety Act. All external wiring shall be enclosed in some manner Yes: No: to protect it from environmental damage and all connections should be made in a sealed enclosure. Two front high mounted double beam halogen plow lights Yes: No: with signal lights on high mounting bar Two right side cab-mounted wing lights Yes: No: Two rear mounted Red LED Flood lights with switch Yes: No: One SWS LED Becon Amber/Blue on fold down Yes: No: right side bracket One flashing amber LED light to be supplied on rear. Yes: No: Back up lights Yes: No: Back up alarm Yes: No: Back up camera capable of being operated manually as 13

14 well as automatically when reversing Two halogen moldboard lights Yes: No: Two halogen cab mounted headlights Yes: No: Two halogen cab mounted work lights Yes: No: Two halogen work lights mounted left and right side of main Yes: No: frame forward of lift cylinders Two halogen back up lights Yes: No: Lights at rear of grader to include stop, tail and turn Yes: No: signal lights Four way hazard flashing light system Yes: No: 18. IN-CAB INSTRUMENTATION Hour meter, oil temperature gauge, oil pressure gauge and fuel Yes: No: gauge Tachometer Yes: No: Engine temperature warning system with audible alarm Yes: No: And light indicator. Engine low oil pressure warning system with audible alarm Yes: No: and light indicator Volt or Amp Meter Yes: No: Three level electronic machine monitor system designed to Yes: No: inform operator, visually and audibly of normal and abnormal system operating status. Slope meter in cab.(mechanical) Yes: No: One 12 volt power outlet Yes: No: SPECIFICATIONS: CONFIRMATION: 19. CONVERTER 25 amp continuous duty, 30 amp intermittent, with Yes: No: voltage balancer to operate two-way radio and 12 volt power outlet 14

15 20. ENGINE COVER The engine is to be completely enclosed by cowling having Yes: No: hinged panels to provide easy access to all parts for service. 21. FUEL TANKS The fuel tank shall have a minimum capacity of Yes: No: 375 L / 100 US Gal. Tank to be full upon delivery Ground level fueling Yes: No: 22. WEATHER GUARDS All vertical intake and exhaust stacks shall be supplied with Yes: No: weather guards. Intake stack tube able to be relocated to prevent snow Yes: No: in system when plowing 45 exhaust elbow to be included Yes: No: 23. EQUIPMENT Factory mounted front and rear fenders (Poly) with flaps Yes: No: Front tire fenders shall move in conjunction with tires Yes: No: in all directions. Rear fenders with flaps shall not interfere with the ability Yes: No: to fully open cab doors, engine enclosure or service access doors. Rear tow hitch Yes: No: Slow moving vehicle sign provided Yes: No: Single key locks for entire vehicle Yes: No: SPECIFICATIONS: CONFIRMATION: 24. PLOW ATTACHMENTS Viking 135 HSE 10 ft. One Way plow C/W hydraulic Yes: No: tilt cylinder with quick attach hose couplers, carbide edge backer, carbide shoe, safety cable, rubber flap and parts manual (or Craig Equivalent) 15

16 Front A Frame to be used in conjunction with the Yes: No: specified Grader The front A-Frame shall be supplied to suit a one-way Yes: No: plow attachment and/or customer s champion 9 dozer blade, provisions for heel chains for V-Plow, complete with hydraulic cylinder, all other necessary components such as valving components, and chain spade. The frame shall provide for holes for push arms Yes: No: approximately 19 from ground level. (Drop blocks to be supplied if required). The unit shall come with an extra valve bank Yes: No: for the snow plough tilt cylinder, complete with lock valve and quick couplers. Rubber flap, safety cable, carbide edges or carbide shoes Yes: No: 25. CRAIG WING ATTACHMENTS Craig Hydraulic Snow Wing Model FM including Yes: No: High wear edge (front mount - North Perth & South Bruce Only) Craig Hydraulic Snow Wing Model FM including Yes: No: High wear edge (rear mount Huron East Only) The following attachments shall be supplied with the wing: One wing blade with Hi-wear edge (200-12) Yes: No: 302 Front and rear wing masts, complete with Yes: No: mounting brackets and braces, shall be supplied 261-6D front post, 302 rear post The lower wing brace shall be equipped with Yes: No: shear pin and spring to absorb shocks. 301 lift group or equivalent All necessary components such as control valves, Yes: No: cylinders, and hydraulic hose, to permit the raising and lowering of the snow wing, shall be supplied. Hydraulic hoses to have bulk head connectors for Yes: No: easy removal of front and rear towers 16

17 SPECIFICATIONS: CONFIRMATION: Float valves for front slide and wing lift supplied. Yes: No: A sturdy eye shall be provided on top of the Yes: No: wing at the centre of gravity for handling Front and rear wing safety chains shall be supplied Yes: No: Spare parts and manual shall be supplied. Yes: No: Signed Manufacturer s Standard Warranty shall be Yes: No: supplied. Wing to be completely installed when delivered. Yes: No: 26. VANDALISM PROTECTION A lock or locked cover shall be provided to protect the: Yes: No: fuel cap, cab doors, engine side panels, hydraulic oil reservoir cap and the radiator cap. All locks keyed alike Yes: No: 27. PAINT Paint shall be manufacturer s standard color. Yes: No: 28. ENVIRONMENTAL Environmental drain provisions shall be provided for the following: Engine fuel Yes: No: Hydraulic oil Yes: No: Engine oil Yes: No: Engine coolant Yes: No: Transmission oil Yes: No: Differential oil Yes: No: Fuel tank Yes: No: Fuel tank shut off at tank Yes: No: 29. WARRANTY The equipment shall include a one year manufacturer s Yes: No: warranty, a copy of which shall be included with the proposal documents. Operator s handbook, shop manual and spare parts list Yes: No: 17

18 shall be supplied for grader and attachments. SPECIFICATIONS: CONFORMATION: Warranty shall be effective from the date that the grader Yes: No: is delivered to the customer. Warranty shall be FOB the customers shop. Yes: No: 30. OPTIONS: Bidders are requested to bid, but not required to bid, on any of these options: 1. Extended warranty option (3 & 5 years, 3000 and 5000 Hours) Powertrain Plus Hydraulics Specify and attach (Do not include in bid price) Submit Price on Bid Sheet Yes: No: 2. Dozer blade (Huron East only) 3. Scarifier mid mount (Huron East only) Specify and attach (Do not include in bid price) Submit Price on Bid Sheet Yes: No: CERTIFICATE OF INSURANCE REQUEST The Municipalities of North Perth, South Bruce and Huron East will require a Certificate of Liability Insurance from you with this quotation. It must be issued by your insurer or on a standard CSIO form and signed by an Authorized Representative. In this certificate, the Municipality will require the following: 1. Your full name and address with contact name & phone number 2. Description of your Business Operation 3. Commercial General Liability with a limit no less than $2,000, Tenants Legal Liability, Cross Liability, Notice of Cancellation (30 Days) 5. The Municipality is to be added and shown as an Additional Insured under Liability. 6. If a licensed motorized vehicle is being used, we require Confirmation of Automobile Liability Insurance or Commercial Automobile Liability with a limit no less than $2,000, Workplace Safety Insurance Board Coverage The Municipalities of North Perth, South Bruce and Huron East will require a current WSIB Clearance Certificate with this quotation. When submitting the Tender, the following documents must be submitted: Certificate of Insurance Current WSIB clearance certificate 18

19 2015 MOTOR GRADER TENDER Tenders will be received at the North Perth Municipal Office up to the closing date of Wednesday, May 20, 2015 at 12:00:00 noon. Lowest or any tender not necessarily accepted. Unit Price: $ Sub-Total: $ 13%HST: $ Net Price $ Municipality reserves the right not to trade the Volvo grader and to purchase the new grader as tendered above for the tendered unit price plus HST. Delivery Date: Terms of Payment: OPTION #30 1. Extended Warranty Price: Name of Company: Address: Phone: Fax: Signature of Bidder: Date: 19

20 2015 MOTOR GRADER TENDER Tenders will be received at the North Perth Municipal Office up to the closing date of Wednesday, May 20, 2015 at 12:00:00 noon. Lowest or any tender not necessarily accepted. Unit Price: $ Less Trade: $ (1993 Champion 740 c/w plow and wing) Sub-Total: $ 13%HST: $ Net Price $ Municipality reserves the right not to trade the Champion grader and to purchase the new grader as tendered above for the tendered unit price plus HST. Delivery Date: Terms of Payment: OPTION #30 1. Extended Warranty Price: Name of Company: Address: Phone: Fax: Signature of Bidder: Date: 20

21 2015 MOTOR GRADER TENDER Tenders will be received at the North Perth Municipal Office up to the closing date of Wednesday, May 20, 2015 at 12:00:00 noon. Lowest or any tender not necessarily accepted. Unit Price: $ Less Trade: $ (1993 Champion 740 c/w mid-mount scarifier) Sub-Total: $ 13%HST: $ Net Price $ Municipality reserves the right not to trade the Champion grader and to purchase the new grader as tendered above for the tendered unit price plus HST. Delivery Date: Terms of Payment: OPTION #30 1. Extended Warranty Price: 2. Dozer blade (Huron East only) Price: 3. Scarifier-mid mount (Huron East only) Price: Name of Company: Address: Phone: Fax: Signature of Bidder: Date: 21

22 22