CEELOK FAS-T CONNECTORS
|
|
- Wilfred Simmons
- 6 years ago
- Views:
Transcription
1 CEELOK FAS-T CONNECTORS Small Form Factor, Field Terminable Connectors CeeLok FAS-T connectors ofer a small form factor, ield terminable I/O connector capable of 0 Gb/s Ethernet. Crimpsnap contacts enable easy termination and ield repairability. The integral backshell ofers easy 60-degree shield termination. The compact size 8 shell helps designers meet the needs of reduced SWaP (size, weight, and power). The connector s T-shaped contact pattern provides noise cancellation and decoupling to minimize crosstalk and increase signal integrity. HIGH SPEED Gigabit and 0 Gigabit Ethernet Compatible with Cat 5e, Cat 6A or Cat cables T-shaped pin pattern improves signal integrity through uniform crosstalk cancellation SPACE AND WEIGHT SAVINGS Compact Size 8 shell EASY TERMINATION AND FIELD REPAIRABILITY Crimp-snap, 9029-style contacts FLEXIBLE BACKSHELL/ SHIELDING OPTIONS Backshell integrated in plug body provides low proile, low cost, low weight strain relief and EMI protection Compatible with multiple braid termination techniques, adapter styles and seal boots RUGGED Scoop-proof design Insert assembly mechanically retained for 25 lb. retention force Robust coupling ring mechanism The CeeLok FAS-T connector is a true 00-ohm impedance connector that is compatible with Cat 5e and Cat 6A cables and protocols ranging from the USB and IEEE 94 to gigabit and 0G Ethernet. Performance Characteristics DATA RATES Gigabit and 0 Gigabit Ethernet when used with Cat 5e, Cat 6A or Cat cables ELECTRICAL Insulation resistance: 5000 MΩ ambient, C Dielectric withstanding voltage: 500 sea level 00 0,000 ft. Shielding efectiveness: per MIL-DTL-8999 Shell-to-shell conductivity: 5 mv initial, 0 mv inal MECHANICAL Vibration, Sine: MIL-DTL-8999 Series III (60 g), 4 hrs per axis, no elevated temperature Vibration, Random: EIA Condition VI Letter J (4.92 g) Durability: 500 mating cycles Contact Retention: 0 lb. min. Coupling Torque: 8 in-lb. max. ENVIRONMENTAL PROPERTIES Operating Temperature: -65 C to +5 C Sealing: Altitude Immersion: 0,000 ft. (mated condition) IP6: Mated condition IPX6 (water jet): Receptacle, panel mounted (unmated condition) Corrosion Resistance: 500 hr. salt mist black zinc nickel per AMS-24 MATERIALS Shell: Electroless nickel or black zinc for DOD-approved, RoHS-compliance, corrosion resistance (500 hr. salt mist) Insert: High-temperature thermoplastic for excellent temperature endurance Low dielectric constant for superior signal integrity Contacts: Beryllium copper alloy STANDARDS AND SPECIFICATIONS Product Speciication: Application Speciication: Instruction Sheet: Test Report: Electrical Performance Report:
2 Contacts Plug Type Receptacle Box-Mount Receptacle Box-Mount Receptacle, PC Tail Jam Nut Receptacle, PC Tail Contacts Included Socket None Pin None Pin None Key Electroless Nickel Part No. Black Zinc Nickel N A B N A B N A B N A B N A B N A B N N A A B B N N A A B B Wire Size Pin Part No. Socket, Hooded AWG Application Tooling Hand Crimp Tool: M22520/2-0 Crimp Positioner: TE Part No Insertion/Extraction Tool: TE Part No Pin Socket Ø.04 Ø.04 Ø Min. Ø.04 Section B-B Ø.020 Ø.05 Max. Ø Min B Ø.020 B.08 Ø.02
3 PRODUCT DIMENSIONS Boxmount Receptacle Kit Assembly Part No Recptacle Assembly Plated Aluminum Shell See Detail A 5 5 Detail A Scale: 6: Pin Contact (20249-).50.9 Ø.66 Ø.585 Red Full Mate Indicator Jam Nut Receptacle Assembly, PC Tail Part No Master Key Master Key See Detail A X 4-40 UNF Thread O-Ring PCB Mount Aluminum Shell Detail A Scale 5: /6" 24 Thread Triple Start 5/8' Modified Acme Thread Jam Nut
4 PRODUCT DIMENSIONS Receptacle Kit Assembly Part No Detail A Scale: 6: Red Full Mate Indicator See Detail A Pin Contacts (20249-) Ø.698 ±.005 Jam Nut Receptacle Assembly Aluminum Shell.669 ±.002 /6" 24 Threads O-Ring Triple Start 5/8" Modified Acme Thread /8" Max. Panel Thickness Plug Kit Assembly Part No Socket Contact ( ) Plug Assembly Aluminum Shell and Nut 5
5 PRODUCT DIMENSIONS Boxmount Receptacle Assembly, PC Tail Part No Front Insert: Qty. Material: Black Thermoplastic 5/8 Modified Triple Start Acme Thread Internal Snap Ring: Qty. Material: Stainless Steel Red Full Mate Indicator Band Rear Insert: Qty. Material: Black Thermoplastic Contact Pins: Qty. 8 Material: Gold Plated Leaded Cooper Master Key 4X Ø X.62 X 4-40 UNC Board Mounting Holes Receptacle: Qty. Material: Aluminum
6 PRODUCT DIMENSIONS Protective Cover Cap, Plug Part No (.00) Lanyard Material: Stainless Steel Wire Rivet Material: Steel Finish: Black Zinc Nickel (Ø.685) (Ø.555) Rivet, Oval Material: 00 Series Stainless Steel Finish: Passivated Protective Cover Material: Aluminum Alloy 606-T6 Finish: Electroless Nickel Ring Material: Stainless Steel Finish: Passivated (.04) Interfacial Seal Material: Silicone Rubber Protective Cover Cap, Receptacle Part No Protective Cover Ratchet Style Finish: See Table Lanyard: Material: Stainless Steel Wire and (Ø.840) Ring Material: 00 Series Stainless Steel Finish: Passivated (.000) Rivet Material: Steel Finish: Black Zinc Nickel (Ø.695) and (6.049) (.04) (Ø.42) Protective Cover Ratchet Style Finish: See Table (Ø.260)
7 ACCESSORIES SolderSleeve Shield Terminators Convenient and Efective Terminates a ground lead to cable shield in order to ground the shield Simple, quick termination Available with and without pigtails Versatile Center or end strip for ease of termination Handles wide range of high data rate cables and diameters Environmental Operating temperature: -55 C to +200 C Environmentally sealed Mechanically robust Physical or Other Properties Terminates tin, silver and nickel lat or round braids Provides 60 of shielding Product Ofering Contact TE for a complete listing of SolderSleeve shield terminators CRES-Lock Bandstraps Easy to Use Quick, easy, cost-efective and reliable termination of braided shielding High Performance Low proile, one-piece design eliminates EMI leakage paths Rugged Shock, vibration and environmental tested to meet aerospace and defense requirements Electrical Operating Temperature: -65 C to +200 C Electrical Resistance: Meets.0 mω requirement of AS85049/28 Corrosion Resistance: 500 hr. salt spray Mechanical Tensile Strength: 200 lb. Braid Retention: Meets 00 lb. requirement of AS85049/28 Application Tooling Micro Tie-Dex II, A099 Description Bandstrap Part No. BND-082S
8 ACCESSORIES Heat-Shrinkable Molded Boots Hazard Matched Diferent materials to meet diferent temperature and environmental requirements Optional with pre-applied adhesives for quick installation and high-reliability IP6 sealing Epoxy sealing kits available Versatile Sealing and strain relief to the wires and cables Straight or 90 degree cable exit Application Tooling HL90E or the HG-50A ThermoGun heat gun and appropriate hot air relectors Product Offering Temperature Range -20 C to 60 C -55 C to 20 C Material Adhesive Lined Size* mm Descriptive Part No. Straight 90 Flexible polyolein Yes 24/0.4/ K2-4/ K2-4/42-0 Flexible polyolein Yes 0/4.2/ K2-4/ K2-4/42-0 Fluid-resistant elastomer Yes 0/4.2/ K2-25/ K2-25/ C to 5 C Flexible polyolein No 0/4.2/ K K C to 200 C -5 C to 50 C Modiied luoroelastomer Fluid-resistant elastomer Fluid-resistant elastomer *Size = as-supplied diameter both ends/recovered diameter connector end/recovered diameter cable end. No 0/4.2/ K K2-2-0 Yes 0/4.2/ K2-25/ K2-25/225-0 No 0/4.2/ K K High-Data-Rate Cables Compact and Lightweight Thin-wall technology for smaller, lighter cables 28 AWG to 22 AWG conductors Versions for Common Protocols Fast and Gigabit Ethernet in Cat 5e and Quadrax conigurations IEEE 94 USB Rugged Specialized TE developed polymer formulations designed to support better mechanical and thermal performance in harsh environments State-of-the-art FAA approved foam dielectrics for better signal transmission Ruggedized zero halogen jacket for marine applications that passes the rigorous military standards for lammability while meeting stringent smoke and toxicity requirements Customizable Customizable to meet missioncritical needs such as EMI, luid resistance, and lammability Hybrid designs Electrical testing capability, including skew and eye patterns Robust Operating temperature range from -55 C to +200 C Full range of shielding options for signal integrity
Smallest Connector with Removable Contacts
1 Ultra-Miniature 8STA Size 01 Connectors Smallest Connector with Removable Contacts Ultra compact design and very lightweight connector dedicated to the harshest of motorsport environments. Innovative
More information2M801 Dual-Start ACME Threads
Dual-Start ACME Threads Ordering Guide for 1. 2. 3. 4. 5. 6. SERIES SHELL STYLE SERVICE CLASS SHELL SIZE-INSERT AGGMT CONTACTS KEYING -007-01 C 5-3 P A 1. SERIES Type Part # Description PLUG CRIMP PCB
More informationDEUTSCH H91 Series Filter Connectors MIL-DTL SERIES I
MIL-DTL-38999 Series I connectors are subminiature, environmental-class connectors with high and mediumdensity insert arrangements. They are used where a quickdisconnect coupling system is required for
More information2M804 Push-Pull Crimp Receptacles Ordering Guide for 2M , 002, 003, 004
Push-Pull Crimp Receptacles Ordering Guide for -001, 002, 003, 004 Micro38999 1. 2. 3. 4. 5. 6. 7. SERIES SHELL SERVICE SHELL SIZE-INSERT CONTACTS KEYING SUFFIX STYLE CLASS ARANGEMENT -00X -06 ZNU 6-7
More informationtttttt www.wealdelectronics.com This publication is issued to provide outline information only and unless specifically agreed to the contrary by WEALD ELECTRONICS LTD. in writing, is not to form part of
More informationAmphenol RF Interconnects TNC 31 Series Threaded Lock RF Connector System Materials
TNC 31 Series Threaded Lock RF Connector System Materials Body/Finish Contacts Centre MALE Centre FEMALE Insulator Gasket Crimp Ferrules* *Metal finishes Durability Brass/Nickel Brass/Gold Plated (Au)
More information2M Hermetic General Information. Why 2M Hermetic? GHEC 81. Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard. Page Guide.
2M General Information Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard Averaging less than half the size and weight of their 38999 ancestors, Amphenol s 2M Micro38999 series are an
More informationLSC19 Lighting Cable Assemblies and Connectors
PowerFLEX Cable Assemblies PowerPARTS Wiring Devices ISO 9001:2008 LSC19 Lighting Cable Assemblies and Connectors PowerFLEX and PowerPARTS Introducing a new generation of Lex Products 19 pin, 6-circuit
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. One-piece connector body: Fastest assembly Field installable Anaerobic epoxy
More informationinside diameter wire part no. color length I.D. after recovery gauge red Single Wall Polyolefin 2:1 Shrink Tube - Flexible
PVC 2:1 Shrink Tube Use to insulate terminals after the terminal has been crimped to the wire. Tubing remains flexible and will shrink to approximately 50% of its original size when 160 C (320 F) heat
More information10 A at 100 to 240 VAC. G3NE-220T-US (20 A at 75 to 264 VAC) 5 A at 100 to 240 VAC
Solid State Relays G3NE Compact, Low-cost, SSR Switching 5to20 A Wide load voltage range: 75 to 264 VAC. Dedicated, compact aluminum PCB and power elements used. Built-in varistor effectively absorbs external
More informationDJET. Pushbuttons. toggle switch 6,35 mm dia. recommended accessories: - mounting dimension. technical drawing. circuit drawing
Pushbuttons toggle switch 6,35 mm dia. toggle switch 6,35 mm dia. no. of poles material of contacts Switching position connection method colour part no. 2 silver 2 (maintained chromiumplated 02.17312.21
More informationGrounding Clamp. Pins and Ball-Socket Clamps for Temporary Grounding
Grounding Clamp Pins and Ball-Socket Clamps for Temporary Grounding Pins and Ball-Socket Clamps have been designed to solve several temporary grounding situations, where the physical space or the contact
More informationSection N Micro-D Uni-Saver, Hardware and Accessories
Section Micro-D Uni-Saver, Hardware and ccessories Micro-D ccessories product selection guide Micro-D Uni-Saver lways in stock,these feed-thru pin-socket adapters feature an innovative design using a single
More informationData Sheet for Precision Potentiometer
The ALI(R)17/19 potentiometers in mm housing are suitable for applications where a precise multiturn potentiometer increased radial shaft loads is important. ALI(R)17/19 reinforced bearing ALI(R)17/19
More informationMilitary Circular MIL-C-5015 catalogue Product Index
BN: 69 002 691 241 Military Circular MIL-C-5015 catalogue Product Index Solder Connectors 5 Crimp Front Release Connectors 13 Crimp Rear Release Connectors 18 Insert Configuration Table 22 Orientation
More informationD-SUB SERIES. Fast Locking System ESCC 3401/085. Features and Benefits. Typical Applications. Specification. Quality Level.
D-SUB SERIES Fast Locking System ESCC 3401/085 Features and Benefits Compliant with ESA specification 34010/085 No tool to fix connector No torque value measurement No indicator marking Visual control
More informationAdvanced Customization Type 1. White Paper
Advanced Customization Type 1 White Paper Table of contents Introduction... 4 Scope... 6 Special dimensions... 6 Machining... 8 Finish... 10 Mounting facilities... 14 Assembly... 18 Printed panels...
More informationMounting Type Contact form Quick-connect Screw terminals PCB terminals. E-bracket SPST-NO G7L-1A-T G7L-1A-B
A High-capacity, High-dielectricstrength Relay Compatible with Momentary Voltage Drops No contact chattering for momentary voltage drops up to 0% of rated voltage. Wide-range AC-activated coil that handles
More informationCABLE GRIPS CABLE GRIPS
STRAIN RELIEF Deluxe cord grips are woven of stainless steel mesh with an anodized aluminum body for corrosion resistance. They are offered in single/double weave construction to help absorb direct pull,
More informationTerminals & Connectors
Your Connection Since 1970 Terminals & Connectors 2 TABLE OF CONTENTS Adapters........................... 13 Brazed Barrel Lugs................... 16-17 Bullet Connectors....................9-10 Butt Connectors.......................3
More informationInsulated Scissors. Handles made with shock-proof plastic. Length Blade Std. Part No. Type mm shape Pk.
Cutting Tools Cable Cutter - For copper and aluminum cables only. Extremely high cutting capacity with adjustable screw joint. for cable Length Std. Part No Type Ømm mm 2 AWG mm Pk. AP1017 N 15 50 1/0
More informationMASTER LOCK MASTER LOCK
PADLOCKS & ACCESSORIES Laminated 1-3/4" wide laminated steel body for superior strength hardened steel shackle for extra cut resistance 4-pin cylinder helps prevent picking dual locking levers provide
More informationAVIONICS MOUNTS Low Profile, All-Axis Vibration Isolators
AVIONICS MOUNTS Low Profile, All-Axis Vibration Isolators Avionics mounts are compact, lightweight vibration isolators that provide excellent vibration protection in all axes. Specially designed for the
More informationGround Clamps Cable Tray
COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS AND SOLDERLESS CONNECTORS Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both
More informationFiber Optic Hand Tools
Fiber Optic Hand Tools Miller Fiber Optic Hand Tools FO 103-T-250-J Tri-Hole Fiber Optic Stripper New three-hole model performs all common fiber stripping functions in one compact tool. Hole for removal
More informationData Sheet for Precision Potentiometer
AL(R)17/19 soldering lugs The AL(R)17/19 potentiometers in 22 mm housing are suitable for applications where a precise and economical multiturn potentiometer is important. Economical and precise multiturn
More informationFIBER OPTIC CLOSURES
FIBER OPTIC CLOSURES In-line type and dome type - series CLS-I, CLS- IF2X, CLS-D, CLS-DF2X144 and CLS-DF2X240 PACIFIC INTERCONNECTIONS - connecting the world with fiber optics IN-LINE TYPE FIBER OPTIC
More informationRussellstoll. Electrical Interconnection Systems. Dura-Gard Nonmetallic Waterproof Connections. The Next Generation: Dura-Gard
Dura-Gard Washdown Duty, Chemical, Outdoor, Industrial and Marine Use Nonmetallic Plugs, Connectors Receptacles and Inlets 20, 30 and, Maximum 600 VAC/250 VDC The Next Generation: Dura-Gard Severe environments
More informationFERRULES & TOOLS Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)
TerminalBlocks_072012(alt-2).QD_Blocks 10/23/12 9:05 AM Page 117 To help you do the best job possible when using Altech s terminal blocks, we put together a selection of useful tools to accomplish just
More informationEmergency Stop Devices
New! Selection and Application of.. 278 Emergency Stop Rope Pull Switches........... 279 New! Emergency Stop Push Buttons............... 293 Banner Engineering Corp. Minneapolis, MN U.S.A. bannerengineering.com
More informationGeneral Purpose High Power PCB Relays
T9 Series Two-pole 3A PCB or Panel Mount Relay n A, form A (NO) and form C (CO) switching capability n Designed to control compressor loads to 3.5 tons, LRA / 5.3FLA n Meets requirements of UL 58 and UL
More informationPARTS LIST COLT COLT HEPA
PARTS LIST COLT 800-1250 - 1450 COLT HEPA - 1250-1450 MOTOR / LID ITEM PART NO. PART DESCRIPTION QTY. 101 0891201 TOP COVER 1 102 0294341 TOP MOTOR SEAL 1 103 0299861 STRAIN RELIEF CORD CLAMP 1 104 0891131
More informationPROFIBUS Cordsets Technical Data
These pre-tested molded cordsets utilize high-quality continuous flex cable and integral molded strain relief. They are designed to provide interconnection between simple devices such as sensors and actuators
More informationStainless Steel Cable Ties
Stainless Steel Cable Ties Stainless Steel Cable Ties Ty-Rap Polyester-Coated Stainless Steel Ball-Lock Cable Ties Designed for continuous exposure to salt spray, sunlight, petroleum and chemicals! Stainless
More informationPower Relay RCE. Ordering Information. A High-capacity, High-dielectric-strength Relay Compatible with Momentary Voltage Drops
Power Relay A High-capacity, High-dielectric-strength Relay Compatible with Momentary Voltage Drops No contact chattering for momentary voltage drops up to 0% of rated voltage. Wide-range AC-activated
More informationKnives, Cutters & Scrapers
Knives, Cutters & Scrapers - 261 - Utility Knives T23216 T232 T23218 Snap-Off Knives SK4 Steel blades Stores up to 3 replacement blades Blade sections snap off providing sharp cutting point Stainless steel
More informationFC TYPE CONNECTOR ACCESSORIES ST TYPE CONNECTOR ACCESSORIES
ET ELECOM PARTS FC TYPE CONNECTOR ACCESSORIES 3 Stoping Ring 2 1 Coupling Nut Plug Frame 1 CA-FC-304 Zinc Alloy Nickel Plating 2 CA-FC-CN Zinc Alloy Nickel Plating 3 CA-FC-303 Zinc Alloy Nickel Plating
More informationLimit Switches. 6.2 E47 Precision Switches
Limit Switches E47BMS02 E47BMS11 E47BMS40.2 Product Description............................................. 2 Approvals..................................................... 2 Features and Benefits...........................................
More informationCutting and stripping tools
Introduction 2 Cutting and stripping tool 0.02-10 mm² (16 mm²) 3 Stripping tool for cables Ø 2.5-40 mm 4 Tools for cutting and stripping of conductors 0.5-6 mm² and for cutting up to Ø 20 mm 5 Cutting
More informationBlue Series Hot Melt Hose with RediFlext II Hanger System
Instruction Sheet P/N 1124594_01 Blue Series Hot Melt Hose with RediFlext II Hanger System Safety WARNING! Allow only personnel with appropriate training and experience to operate or service the equipment.
More informationProduct Specification
HDBNC-BH1 Jack, Right Angle Orientation, PCB Terminated HDBNC-CA Plug, Straight Orientation, Cable Terminated Other configurations available for: Vertical cable-to-board applications Through-hole, edge
More informationINNOVATION. STRENGTH. PERFORMANCE.
PRESSURE WASHERS 1 INNOVATION. STRENGTH. PERFORMANCE. Across the globe, the Hustler brand signifies innovation, strength, performance and superior customer care. Our mission is to provide the most dependable,
More informationDesign Standards. Utility Manhole Covers
Design Standards Utility Manhole Covers Texas A&M University in College Station has standardized utility manhole covers to be used for all underground utility access on campus. All new utility manhole
More informationHINGES & STAYS. Hinges & Stays Large Take-Apart Hinge. Medium Take-Apart Hinge
Hinges & Stays HINGES & STAYS TAKE-APART-CONTINUOUS-WELD-ON-CONCEALED-STRAP-STOP-BUTT-OFFSET-LIFT-OFF-STAY 0.1 0-180800.0 Mat: Steel Finish: Zinc Plate Wt:.0kg /.1lbs.8. Acts as a hinge but allows quick
More informationSlit Loom Installation Tool. Spools and Bags. Bulk Boxes
Looms and Tubing Polyethylene Slit Loom Slit seam construction allows for easy wire insertion and repair, yet retains wire even when bent or twisted. Maximum temperature 93 C (200 F). Ideal for protecting
More informationEPIC Rectangular Connectors HBE 24 Plugs & Receptacles
HBE 24 Plugs & Receptacles HBE 24 SCREW & CRIMP TERMINATED INSERTS SCREW TERMINATED View from Cable Side CRIMP TERMINATED Contacts Sold Separately Description Screw Terminated with wire protection Screw
More informationSafety Interlock Switches
r Safety Interlock Switches TL19 TL19 Safety Interlock Switch with uard Door Locking High locking force of 10 N (270 lb.) locks guard door shut until machine is safe to enter IP67 (NEMA 6) enclosure enables
More informationSupplementary protector S 200 MR for ring-tongue applications acc. to UL 1077
Electrical installations in buildings for ring-tongue applications acc. to UL 1077 S 200 MR is a high-performance supplementary protector with ring cable lug connections conforming to UL, CSA, and IEC
More informationModel Number Structure
Solid State Relays Refer to Safety Precautions for All Solid State Relays. Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via
More informationI- 39. Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General Information and special features.
Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General nformation and special features. - 39 Seal out oil, water, dirt, dust and fumes wherever liquidtight flexible metal conduit
More informationULTRA-LIGHTWEIGHT RUGGED GALAXY SERIES
ULTRA-LIGHTWEIGHT RUGGED GALAXY SERIES UPS MIL-SPEC COMPLIANT 1-5 KVA 1-5 U UNIVERSAL 120/240 VAC PFC INPUT SNMP COMMUNICATIONS WHEN EVERY POUND COUNTS! APPLICATIONS Shelters Tactical Systems Shipboard
More informationFor full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
R Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 6-5480 www.cmafh.com Safety Interlock Switches TL19 Safety Interlock Switch with uard Door Locking High
More informationTM ENTERTAINMENT CABLE
TM ENTERTAINMENT CABLE Flexible. GenErgy was born from a wire and cable manufacturer with over a half a century of experience. The result is the most comprehensive and capable cable offering to the entertainment
More informationMS/Standard MS3450 wall mounting receptacle
MS3450 wall mounting receptacle Receptacle, lange Wall Mount, ed oupling Military No. MS3450 mphenol/matrix No. 9440 Typ. Typ. Key oupling lue olor and ccessory qually Placed 120 part Max 4 oles Typ. D
More informationSolutions for Original Equipment Manufacturers (OEM) Connecting Power to Your World TM
Solutions for Original Equipment Manufacturers (OEM) Connecting Power to Your World TM The Right Fit At BURNDY, we pride ourselves on developing solutions. In fact, we thrive on challenge. When our customers
More informationPyrolytic Graphite Sheet
Pyrolytic The Future of Thermal Management You are the visionaries. The engineers. The designers. The architects of the next dimension. We are the makers of your building blocks. Panasonic manufactures
More informationRTA flexible conduits
[ PROTETION OF LES ] Products and systems RT flexible conduits For each application and environmental stress there is a corresponding polyamide, PV or metal-plastic flexible conduit solution, ideal for
More informationSystem pro M compact Miniature Circuit Breaker S 200 U and S 200 UP
Data Sheet System pro M compact Miniature Circuit Breaker S 200 U and S 200 UP 2CDC021316F0004 2CDC021320F0004 The S 200 U and S 200 UP ranges are miniature circuit breakers conforming to UL, CS and IEC
More informationANACONDA SEALTITE CONDUIT TYPE NMFG BLUE
ANACONDA SEALTITE CONDUIT TYPE NMFG BLUE All-plastic, medium mechanical strength, food grade conduit.. NMFG is a conduit specially made for the food industry. The smooth jacket of FDA approved compound
More informationSTRAIGHT BLADE RECEPTACLES
STRAIHT BLADE RECEPTACLES ENERLITES INC. offers a full line of 15 A, 20 A, 30 A and 50 A Receptacles available in Residential rade, Commercial rade, and Industrial rade. ENERLITES Receptacles are precision-manufactured
More informationSection B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1
Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe
More informationAfter wrapping the object to be tied, insert the free end of the tie through the buckle and into the tool.
After wrapping the object to be tied, insert the free end of the tie through the buckle and into the tool. The tail is formed into a fold lock behind the buckle The tool forces a dimple in the band into
More informationT&B Fittings. Industrial Fittings. Liquidtight Flexible Nonmetallic Conduit Fittings. Specifications Type A Conduit Fittings
T& Fittings Liquidtight Flexible Nonmetallic onduit Fittings Specifications Type onduit Fittings Series 6302 Liquidtight Flexible Nonmetallic onduit Fittings pplication To provide a liquidtight, dustight
More informationDesign Standard. Utility Manhole Covers
Design Standard Texas A&M University in College Station has standardized utility manhole covers to be used for all underground utility access on campus. Until further notice, manhole covers manufactured
More informationTip-Over Switches - Non Mercury Contacts
Tip-Over Switches - Non Mercury Contacts SWITCH OPERATION CW172-1 CW1740-1 CW12-0 Tip-over switches are designed to switch on/off when tilted from the vertical position. CW12-0 CW12-1 0.2 ± 10 Ω at Vdc
More informationWire and Cable Holders
WIRE MANAGEMENT Wire and able Holders For low cost wire management. The push-mount style comes in vertical orientation for top entry and narrow width, and horizontal orientation for side entry and low
More informationCONNECTORS FROM THE GREAVES ADAP T ER Z O N E
AGE 9 CONNECTORS FROM THE GRVES ADA T ER Z O N E When the cable doesn t fit, you need a solution fast What can you do when dealing with new or relocated equipment, spec changes, and/or mismatched parts
More informationHardware Solutions Contents
Hardware Solutions Contents Front Retainers MS14108 Type Ruggedized Self-locking Front Retainers 21716 Ruggedized Self-locking Front Retainer 21953 Ruggedized Self-locking Front Retainer SLR1 Self-locking
More informationFLFE..L FLF..L. - Zone 1, 2, 21, 22 - With LED tubes - Easy re-lamping - Designed to last over time. Ex e terminal board housing
FLFE..L FLF..L - Zone 1, 2, 21, 22 - With LED tubes - Easy re-lamping - Designed to last over time Ex e terminal board housing Simplified maintenance 4 Joule shock resistant borosilicate glass White painted
More informationLaboratory Line. Perfectly Equipped for Every Challenge. CoreLab DX. Laboratory Equipment
Laboratory Line Perfectly Equipped for Every Challenge > Robust and maintenance-free > Precise and reliable > Easy and safe to handle CoreLab DX Laboratory Equipment Movie Clinical Centrifuges High flexibility
More informationPARTS LIST CHARGER 2022 ABLT
PARTS LIST CHARGER 2022 ABLT HEAD ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 5990731 SPRING CLIP PAD HOLDER SET INCLUDES: 1 101A 9120205 #8 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW PACK OF 3 3 102 9121490
More informationCABLE CUTTING, STRIPPING AND CRIMPING TOOLS
Cutting 38-39 Stripping 39 0 - CBE CUTTING, STRIPPING ND CRIMPING TOOS Ergonomic handles Surface protection High precision Flexibility With ergonomic handles and a specially The pliers are made of excellent
More informationSELF RE-ERECTING MARKER POSTS
ONE OF A KIND TECHNOLOGY FOR OUR TIMES MULTI APPLICATIONS SELF RE-ERECTING MARKER POSTS TEMPORARY OR PERMANENT BICYCLE LANES CROSSWALKS CHANALIZATION BRIDGES CITY US REFLECTOR WORK ZONES ALL-ROUND RUGGEDNESS
More informationAviation Snips. Multi-Cable Cutter
CUTTING tools Aviation Snips 0653-01L Drop-forged, chrome-moly steel blades with serrated edges. Includes left, right and straight-cut versions with color coded grips green (right), yellow (straight),
More informationQuickTreX LAN-PRO Terminator Plus II
QuickTreX LAN-PRO Terminator Plus II Part # LANPRO-TERM-PL-V2 The kit contains the following: 16 Pocket Standard Tool Tote Bag PRO-Basic LAN Cable Tester QuickTreX Professional "Wire Surgeon " Impact Termination
More informationstyle vision & quarter turns quarter turns section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
quarter turns vision & style quarter turns INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 3 quarter turns No. 626-PK Patent Pending
More informationVisit us at 5170 N 125th St. Butler WI or online at 197
Never uses a clamp Lightweight and durable Smooth elastomer inner tube 250 psi operating pressure Temperature range -40 F to 300 F Sold by running foot Textile braid reinforcement available in Black and
More informationTIG
TIG 101 201 221 301 321 401 Migatronic TIG ERGO - new ergonomically designed welding hoses Continuous control of the welding current with one finger on the control knob allows control of critical functions
More informationOAsys OP0XX, Issue 01, February Outside Plant. Metallic joint closure NXOK 10 units. Features and Benefits
Metallic joint closure NXOK 10 units for OPGWs with steel tubes and for optical cables Prysmian Part Number: See the page no. 3 6 The NXOK 10 joint closure units are designed to be used for jointing optical
More informationAfter wrapping the object to be tied, insert the free end of the tie through the buckle and into the tool.
After wrapping the object to be tied, insert the free end of the tie through the buckle and into the tool. Squeeze the handle of the tool to create the dual lock and cut off the tail. The cable tie forms
More informationHEATER POWER CONTROLLER
HEATER POWER CONTROLLER /04 Rev 0 - - ii PROCON MODEL HPC TABLE OF CONTENTS DESCRIPTION... MANUAL REVISIONS... 5 WARRANTY... 5 SPECIFICATIONS... 6 DRAWINGS PHYSICAL DIMENSIONS 44-090095-0-00... 7 PANEL
More informationINSTALLATION MANUAL AND OPERATING INSTRUCTIONS. MD25-( ) Series Airspeed Indicator
INSTALLATION MANUAL AND OPERATING INSTRUCTIONS MD25-( ) Series Airspeed Indicator REV. C July 14, 2011 Manual Number 9017051 Mid-Continent Instruments and Avionics 9400 E. 34 th Street N., Wichita, KS
More informationSECTION 11 TABLE OF CONTENTS
Contents Inspection and Cleaning Features and Benefits...11-2 Standards...11-2 Product Range Overview...11-4 LuxCis ARINC 801 Inspection and Cleaning Kits...11-5 Inspection Assistant Kits for LuxCis ARINC
More informationIMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2204A
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2204A Warnings Truck Bed and Camper Protection Torklift does not recommend installing your camper on top of a plastic bed liner (or other compressible
More information2.92mm Connector Series
38 Performance Features Connector Series Materials/Finishes Website: www.ainfoinc.com Email: sales@ainfoinc.com Nominal Impedance 50ohm Housing: Type 303 Stainless Steel-Polished&Passivated Frequency Range
More informationUniversal control- and safety isolatingresp. USTE. General Data. Advantages. Applications. Standards 2 " Certifications W
isolating General Data Rated input voltage 208 - Rated output voltage 24-230 Vac Rated power 100-3200 VA Insulation class B Maximum ambient temperature 40 C Efficiency up to 96 % Degree of protection IP
More informationFor full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
R Safety Interlock Switches TL4024 Safety Interlock Switch with uard Door Locking High locking force of 1,500 N (7 lb.) locks guard door shut until machine is safe to enter IP67 (NEMA 6) enclosure withstands
More informationDry Ice Blasting Unit
Dry Ice Blasting Unit ASCO Nanojet complete (fully adjustable) part no. 900910 & 4064272 The ASCO Nanojet has been specially developed for the plastics industry. It has an integrated pellet grinder in
More informationCONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9
CONTENTS PAGE NUMBER Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5 Hoist Rings Center Pull 6 Side Pull 7 Socket Head Stripper Bolts Inch 8 Metric 9 Punch Holder Shanks 10 Roller Stock Guides 11
More informationMolded High-Voltage Bushing Wells
66-10 Molded High-voltage Bushing Wells Howard Industries Components Division Molded High-Voltage Bushing Wells Catalog Section 66-10 INTRODUCTION Howard Industries molded high-voltage bushing wells are
More informationTrapped Key Transfer System SHGV SVM SVE
Trapped Key Transfer System SHGV SVM SVE Description Area of application Cost Savings The SHGV key transfer system occurs mainly in more complex manufacturing systems and equipment. It is especially suitable
More informationIMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS. Part # A7006
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS Part # A7006 Parts List Wobble Stopper Body Wobble Stopper Shaft Camper Bracket Lower Bracket Assembly Upper Bracket Upper Bracket Clamp 3/8 SAE Flat
More informationACCESSORIES 5:05 5:05 PRODUCT CATALOGUE 189
ACCESSORIES 5:05 5:05 PRODUCT CATALOGUE 189 HYDROSCAND ACCESSORIES PRODUCT GROUP 500, 505, 507 OCH 510 This product group includes products that complement Hydroscand s range of hoses and fluid connectors,
More informationTruDesign Aquavalve (Y Valve)
TruDesign Aquavalve (Y Valve) Legislation in many countries dictates the use of holding tanks near shore, or in defined areas. By installing a diverting valve (Y Valve), the user has the choice to divert
More informationSafeSite LED Floodlight - ATEX / IECEx. for Outdoor Industrial Applications. 1 MDTEXSSFLX001_B
SafeSite LED Floodlight - ATEX / IECEx for Outdoor Industrial Applications 1 www.dialight.com MDTEXSSFLX001_B On when it matters most. Products and solutions that protect your business 2 www.dialight.com
More informationPRO-LITE 350 HOSE USE WITH SWIVEL-SEAL, AUTO-FIT 0R AUTO-CRIMP HOSE ENDS
PRO-LITE 350 HOSE USE WITH SWIVEL-SEAL, AUTO-FIT 0R AUTO-CRIMP HOSE ENDS EARL S PRO LITE 350 HOSE IS ONE OF THE LIGHTEST AND MOST DURABLE HOSES AVAILABLE ON THE MARKET TODAY! Serious racers and street
More information/ Tool and Equipment Safety Tether System (T.E.S.T.S)
20 INSTRUCTIONS FOR USE AND PRODUCT GUIDE 799953 / 799955 Tool and Equipment Safety Tether System (T.E.S.T.S) Part # T353012 Rev 2 Reliance Industries LLC 2802 East X Street Deer Park, Texas 77536 281-930-800
More informationGlass Door Fittings Glass Door Accessories
Angled striking plate Aluminium stainless steel coloured 981.27.983 Recess striking plate DIN left DIN right Steel nickel plated matt 911.39.285 911.39.28 WC thumbturn cylinder Area of application: For
More informationIndustrial Specification Grade Straight Blade Receptacles. Duplex and Single Receptacles
Industrial Specification rade 2 Pole, 3 ire rounding Duplex and Single A-5 STRAIHT BLADE TESTIN & CODE Spec. C-596 (file no. 15058). C22.2 no. 42, CSA (file no. 6233-01). 2.37" (60.2mm) 1.31" (33.3mm)
More information