4 Season Enclosure. 3 Season Enclosure. Screen Enclosure. Suggested Installation Instructions. Patio Cover / Car Shield
|
|
|
- Hugh Wilfred French
- 6 years ago
- Views:
Transcription
1 4 Season Enclosure 3 Season Enclosure Screen Enclosure Patio Cover / Car Shield Suggested Installation Instructions
2
3 Table of Contents 4 Season Enclosure... 1 Anchoring Details... 2 Installation - Under Existing Roof... 3 Installation - Studio Enclosure... 6 Installation - Cathedral Enclosure... 9 Installation - Direct Glazing...12 Installation - Doors...14 i. Garden Door (Single Panel and Double Panel)...14 ii. Sliding Patio Door...15 Installation - Miscellaneous...16 i. Pocket Stud Detail...16 ii. Electrical Raceway Detail Season Enclosure Anchoring Details...18 Installation - Under Existing Roof...19 Installation - Studio Enclosure...23 Installation - Doors...27 i. Garden Door (Single Panel Only)...27 ii. Storm Door...28 Screen Enclosure Anchoring Details...30 Installation - Solid Panel Assembly...31 Installation - Full Screen Assembly...35 Installation - Doors...36 i. Storm Door...36 Table of Contents Patio Cover / Car Shield Anchoring Details...38 Installation - Attached to Existing Sturcture...39 Installation - Free Standing...43 Installation - Roof Panels Attachment Details...45 Panel Connection Detail...45 Bearing Wall Connection Detail...46 Roof Ridge Detail...47 Ceiling Fan Mounting Detail...47 August, 2011
4
5 4 Season Room Enclosure 3 1/4 Extruded Wall System Thermally Broken Framing System 3 or 4 Roof System Features Integrated Electrical Insulated Vinyl Windows Available in White & Almond 1
6 Anchoring Details At Floor ¼ DIAM. EXPANSION 90 MPH WIND SPEEDS LOCATE 1 ANCHOR 4 FROM EACH MULLION AND 16 O.C. THEREAFTER ¼ X 3 LONG LAG 90 MPH WIND SPEEDS LOCATE 1 ANCHOR 4 FROM EACH MULLION AND 16 O.C. THEREAFTER ¼ X 3 LONG LAG 90 MPH WIND SPEEDS LOCATE 1 ANCHOR 4 FROM EACH MULLION AND 16 O.C. THEREAFTER 4 Season Room Enclosure BASE/TOP CAP SPLICE TO BE 8 MINIMUM FROM VERTICAL MULLION EXISTING OR NEW CONCRETE SLAB IN GOOD CONDITION BEAD OF SILICONE REQUIRED TO PREVENT WATER INFILTRATION BEARING WALL SECTION CONCRETE INSTALLATION BASE/TOP CAP SPLICE TO BE 8 MINIMUM FROM VERTICAL MULLION ALUM. FLASHING EXISTING OR NEW WOOD DECK IN GOOD CONDITION BEAD OF SILICONE REQUIRED TO PREVENT WATER INFILTRATION BEARING WALL SECTION WOOD DECK INSTALLATION BASE/TOP CAP SPLICE TO BE 8 MINIMUM FROM VERTICAL MULLION ALUM. FLASHING INSULATED STRUCT. DECK PANELS BEARING WALL SECTION THERMAL FLOOR PANEL INSTALLATION SUBSTRATE DETAILS WOOD MIN. 1.5 EMBEDMENT MIN EDGE DISTANCE CONCRETE MIN EMBEDMENT MIN. 2.5 EDGE DISTANCE BEAD OF SILICONE REQUIRED TO PREVENT WATER INFILTRATION 2
7 Installation: Under Existing Roof H115 (H113 FOR NON ELECTRICAL) H113 NOTE: OVERALL DIMENSIONS DETERMINED BY EXISTING OPENING OF STRUCTURE. Step 1: Top and Bottom Track Installation #8 TEK THROUGH TOP & BOTTOM ALL VERT. FRAMING 1 #10 TEK W/ WASHER THROUGH ROOFING INTO TOP TRACK TRACK TO TERMINAL MULLION 1 #10 WOOD 16 O.C. FOR WOOD ¼ 24 O.C. FOR CONCRETE 2 H112 4 Season Room Enclosure 2 SEE ANCHORING DETAILS ON PG. 3 Step 2: Terminal Wall Mullion 3
8 SOLID PANEL H112 NOTE: SOLID PANEL DIMNENSIONS ARE VARIABLE. 4 Season Room Enclosure #8 TEK THROUGH TOP & BOTTOM ALL VERT. FRAMING 3 Step 3: Solid Panel Installation SOLID PANEL TO HORIZONTAL MULLION SEE ANCHORING DETAILS ON PG. 3 3 Step 4: Horizontal Mullion Installation H110 OR H210 ALUMINUM OR VINYL WINDOW OPTIONS DOUBLE HUNG SINGLE HUNG HORIZONTAL SLIDER (XO) HORIZONTAL SLIDER (XOX) CASEMENT FIXED Step 5: Vertical Mullion and Window Unit Installation 4
9 #8 TEK THROUGH TOP & BOTTOM ALL VERT. FRAMING 4 SNAP CAP 4 NOTE: POCKET STUD CAN BE USED AS EITHER WIRING RACEWAY OR TO CONCEAL STEEL POST IF NEEDED. INTERMEDIATE VERTICAL MULLION TO TOP TRACK (BOTTOM TRACK TYPICAL) Step 6: Vertical Mullion Placement 4 Season Room Enclosure Step 7: Repeat Steps 2 through 5 5
10 4 4 Season Room Enclosure H113 Step 8: Repeat Step 6 Installation: Studio Enclosure SOLID PANEL Step 9: Finish Wall with Solid Panel H110 NOTE: SOLID PANEL USED AS CORE SUPPORT IN CORNER MULLION. SEE DETAIL 5 FOR FURTHER DETAILS. NOTE: OVERALL DIMENSIONS DETERMINED BY EXISTING FLOOR AREA Step 1: Track Installation at Floor Step 2: Corner Mullion: Panel & Mullion Setting 6
11 H215 H214 Step 3: Corner Mullion: Cap & Angle Attachment #8 TEK THROUGH TOP & BOTTOM ALL VERT. FRAMING 24 O.C. 5 SOLID PANEL AS MULLION CORE VARIABLE WIDTH PANEL, WINDOW UNIT, OR DOOR 5 4 Season Room Enclosure CORNER MULLION DETAIL Step 4: Corner Mullion: Finished Insallation 7
12 TOP TRACK ATTACHED AFTER WALL IS CONSTRUCTED 4 NOTE: SEE UNDER EXISITNG INSTALLATION FOR BEARING WALL COMPONENT PLACEMENT & ATTACHMENT 4 Season Room Enclosure Step 5: Bearing Wall Installation TEMPORARY WALL SUPPORT BEAM FOR USE DURING CONSTRUCTION. ATTACH AT DESIRE PITCH OF ROOF. NOTE: MINIUM ROOF PITCH IS 2% 5 CORNER MULLION H113 Step 6: Repeat Steps 1 through 5 Step 7: Exploded View of Gable Studio Wall 8
13 WINDOW UNIT OR SOLID PANEL NOTE: OPPOSITE WALL IS TYPICAL H110 OPTIONAL WINDOW UNIT OR SOLID PANEL CAN EXTEND TO FULL SPAN. Step 8: Finished Studio Room Installation: Cathedral Enclosure NOTE: OVERALL DIMENSIONS DETERMINED BY EXISTING FLOOR AREA CATHEDRAL ROOF PROFILE H118 OR H121 #10 WOOD 12 O.C. FOR WOOD ¼ 24 O.C. FOR CONCRETE 4 Season Room Enclosure H112 H113 2 Step 1: Track Installation at Floor Step 2: Terminal Mullion & Roofing Track Installation 9
14 NOTE: SEE UNDER EXISITNG INSTALLATION FOR BEARING WALL COMPONENT PLACEMENT & ATTACHMENT 4 Season Room Enclosure Step 3: Initial Wall Installation Step 4: Cut Corner Mullion to Meet Roof Pitch 10
15 WINDOW UNIT OR SOLID PANEL H110 OPTIONAL WINDOW UNIT OR SOLID PANEL CAN EXTNED TO FULL SPAN. ROOF SUPPORT BEAM SITE SPECIFIC 6 Step 4: Cathedral Gable Wall Installation H210 SNAP CAP THREE (3) #12 TEK SCREWS THROUGH BEAM ALUMINUM OR WOOD BEAM 6 NOTE: OPPOSITE WALL IS TYPICAL 4 Season Room Enclosure CEILING BEAM DETAIL Step 5: Finished Bearing Walls with Ceiling Beam Attached 11
16 Installation: Direct Glazing Option NOTE: STEPS 1 4 FOR UNDER EXISITNG INSTALLATION SHOWN. APPLY TO GABLE WALL AS NECCESSARY 1 H115 (H113 FOR NON ELECTRICAL) H112 4 Season Room Enclosure #8 TEK THROUGH ANGLE 12 O.C. 2 Step 1: Top/Bottom Track & Terminal Wall Mullion Installation 1/2 X 3/4 ANGLE FOR GLASS INSTALLATION (SILICONE AT GLASS CONTACT) H112 H113 H110 OR H112 DIRECT GLAZING DETAIL Step 2: ½ x ¾ Angle Placement 12
17 4 T315 ALUMINUM OR VINYL DOOR OPTIONS FRENCH HINGED DOUBLE JAMB HINGED DOUBLE CENTER HINGED DOUBLE STORM DOOR OPTIONAL DOOR For use with all installation types Step 3: Glass Placement at Angles R260 H112 Step 4: Installation of Door Option 4 Season Room Enclosure Step 5: Exploded View Repeat Steps
18 Installation: Garden Doors (Single or Double Panel) H112 FRAME JAMB NOTE: DOOR MAIN FRAME INSTALLATION IS IDENTICAL BETWEEN THE 4 SEASON & 3 SEASON ENCLOSURES BUT COMPONENTS THE FRAME ATTACHES TO ARE SPECIFIC TO THOSE ENCLOUSRES. DOOR FRAME IS THE SAME FOR 1 OR 2 PANEL DOORS. 4 Season Room Enclosure #8 TEK SCREWS THROUGH FRAME INTO H112 WITH CONTINUOUS CONCEALOR CAP Step 1: Threshold and Frame Jamb Attachment H112 CORNERS TO BE COPED & BUTTED THRESHOLD H113 H112 #8 TEK SCREWS THROUGH FRAME INTO H112 WITH CONTINUOUS CONCEALOR CAP CORNERS TO BE COPED & BUTTED FRAME JAMB Step 2: Frame Head Attachment 14
19 Installation: Sliding Patio Doors T315 OPTIONAL DOOR For use with all installation types H112 #8 TEK INTO 12 O.C. R260 Step 1: Installation of Sliding Patio Door Option (Illustration Only) T315 H Season Room Enclosure 8 R260 NOTE: USE OF T315 & R260 TYPICAL FOR ALL DOOR INSTALLATIONS SLIDING PATIO DOOR OPTION DETAIL DOOR FRAME Step 2: Continue Wall Installation as Typical 15
20 Installation: Miscellaneous Options POCKET STUD DETAIL CONCEALED STEEL POST SUPPORT ELECTRICAL RACEWAY DETAIL CONCEALED WIRING RACEWAY 4 Season Room Enclosure H210 SNAP CAP H210 SNAP CAP 16
21 3 Season Room Enclosure Features 2 1/2 Extruded Wall System Single Glaze Aluminum Windows Non-Thermally Broken Framing System Available in White, Almond & Bronze 1 3/4 or 3 Roof System 17
22 Anchoring Details At Floor ¼ DIAM. EXPANSION 90 MPH WIND SPEEDS LOCATE 1 ANCHOR 4 FROM EACH MULLION AND 16 O.C. THEREAFTER ¼ X 3 LONG LAG 90 MPH WIND SPEEDS LOCATE 1 ANCHOR 4 FROM EACH MULLION AND 16 O.C. THEREAFTER ¼ X 3 LONG LAG 90 MPH WIND SPEEDS LOCATE 1 ANCHOR 4 FROM EACH MULLION AND 16 O.C. THEREAFTER BASE/TOP CAP SPLICE TO BE 8 MINIMUM FROM VERTICAL MULLION BASE/TOP CAP SPLICE TO BE 8 MINIMUM FROM VERTICAL MULLION BASE/TOP CAP SPLICE TO BE 8 MINIMUM FROM VERTICAL MULLION ALUM. FLASHING ALUM. FLASHING 3 Season Room Enclosure EXISTING OR NEW CONCRETE SLAB IN GOOD CONDITION SILICONE SEALANT REQUIRED TO PREVENT WATER INFILTRATION BEARING WALL SECTION CONCRETE INSTALLATION EXISTING OR NEW WOOD DECK IN GOOD CONDITION SILICONE SEALANT REQUIRED TO PREVENT WATER INFILTRATION BEARING WALL SECTION WOOD DECK INSTALLATION INSULATED STRUCT. DECK PANELS BEARING WALL SECTION THERMAL FLOOR PANEL INSTALLATION SUBSTRATE DETAILS WOOD MIN. 1.5 EMBEDMENT MIN EDGE DISTANCE CONCRETE MIN EMBEDMENT MIN. 2.5 EDGE DISTANCE SILICONE SEALANT REQUIRED TO PREVENT WATER INFILTRATION 18
23 Installation: Under Existing Roof F113 (2) H214 EXISTING ROOF HEADER F113 F113 NOTE: OVERALL DIMENSIONS DETERMINED BY EXISTING OPENING OF STRUCTURE. Step 1: Top and Bottom Track Installation #8 TEK THROUGH TOP & BOTTOM ALL VERT. FRAMING #10 TEK W/ WASHER THROUGH ROOFING INTO TOP TRACK OPTION 1 OPTION Season Room Enclosure 1 TRACK TO TERMINAL MULLION #10 WOOD 16 O.C. FOR WOOD ¼ 24 O.C. FOR CONCRETE/CMU 2 F112 2 SEE ANCHORING DETAILS ON PREVIOUS PAGE Step 2: Terminal Wall Mullion 19
24 SOLID PANEL F112 NOTE: SOLID PANEL DIMENSIONS ARE VARIABLE. 3 Season Room Enclosure NOTE: APPLICATION OF SEALANT REQUIRED BETWEEN WALL PANEL AND EXTERIOR LEG OF BOTTOM TRACK TO PREVENT WATER INFILTRATION. #8 TEK THROUGH TOP & BOTTOM ALL VERT. FRAMING 3 Step 3: Solid Panel Installation SOLID PANEL TO HORIZONTAL MULLION SEE ANCHORING DETAILS ON PREVIOUS PAGE 3 Step 4: Horizontal Mullion Installation F110 (2) ALUMINUM WINDOW OPTIONS SINGLE HUNG FIXED Step 5: Vertical Mullion and Window Unit Installation 20
25 #8 TEK THROUGH TOP & BOTTOM ALL VERT. FRAMING 4 4 NOTE: MULLION CAN BE USED TO CONCEAL STEEL POST IF NEEDED. INTERMEDIATE VERTICAL MULLION TO TOP TRACK (BOTTOM TRACK TYPICAL) Step 6: Vertical Mullion Placement 3 Season Room Enclosure Step 7: Repeat Steps 2 through 5 21
26 3 Season Room Enclosure NOTE: 3/4 WEEP HOLES TO BE PUNCHED 48 O.C. FOR PROPER WATER DRAINAGE Step 8: Repeat Step 6 4 Step 9: Finish Wall with Solid Panel 22
27 Installation: Studio Enclosure MITER ALL CORNERS NOTE: OVERALL DIMENSIONS DETERMINED BY EXISTING FLOOR AREA F113 Step 1: Track Installation at Floor SOLID PANEL F110 NOTE: SOLID PANEL USED AS CORE SUPPORT IN CORNER MULLION. SEE DETAIL 5 FOR FURTHER DETAILS. Step 2: Corner Mullion: Panel & Mullion Setting 3 Season Room Enclosure 23
28 H215 H214 3 Season Room Enclosure Step 3: Corner Mullion: Cap & Angle Attachment #8 TEK THROUGH TOP & BOTTOM ALL VERT. FRAMING 24 O.C. 5 SOLID PANEL AS MULLION CORE F110 5 CORNER MULLION DETAIL Step 4: Corner Mullion: Finished Insallation 24
29 TOP TRACK ATTACHED AFTER WALL IS CONSTRUCTED 4 NOTE: SEE UNDER EXISITNG INSTALLATION FOR BEARING WALL COMPONENT PLACEMENT & ATTACHMENT Step 5: Bearing Wall Installation TEMPORARY WALL SUPPORT BEAM FOR USE DURING CONSTRUCTION. ATTACH AT DESIRE PITCH OF ROOF. NOTE: SEE STEPS 5 8 FOR TYPICAL ROOF PANEL ASSEMBLY & INSTALLATION NOTE: MINIUM ROOF PITCH IS 2% F112 (ATTACHES TO STRUCTURE 3 Season Room Enclosure 5 CORNER MULLION F113 Step 6: Repeat Steps 1 through 5 Step 7: Exploded View of Gable Studio Wall 25
30 WINDOW UNIT OR SOLID PANEL 3 Season Room Enclosure Step 8: Finished Studio Room NOTE: OPPOSITE WALL IS TYPICAL F110 OPTIONAL WINDOW UNIT OR SOLID PANEL CAN EXTEND TO FULL SPAN. 26
31 Installation: Garden Doors (Single Panel) F112 (H112 SHOWN) FRAME JAMB NOTE: DOOR MAIN FRAME INSTALLATION IS IDENTICAL BETWEEN THE 4 SEASON & 3 SEASON ENCLOSURES BUT COMPONENTS THE FRAME ATTACHES TO ARE SPECIFIC TO THOSE ENCLOUSRES. #8 TEK SCREWS THROUGH FRAME INTO F112 WITH CONTINUOUS CONCEALOR CAP Step 1: Threshold and Frame Jamb Attachment F112 (H112 SHOWN) CORNERS TO BE COPED & BUTTED THRESHOLD F113 (H113 SHOWN) 3 Season Room Enclosure F112 (H112 SHOWN) #8 TEK SCREWS THROUGH FRAME INTO H112 WITH CONTINUOUS CONCEALOR CAP CORNERS TO BE COPED & BUTTED FRAME JAMB Step 2: Frame Head Attachment 27
32 Installation: Storm Doors NOTE: DETAIL IS TYPICAL OF STORM DOOR INSTALLED USING Z BAR FRAME 3 Season Room Enclosure SOLID PANEL (TYPICAL) F110 Step 1: Storm Door Z Bar Frame Attachment R260 DOOR PANEL SWINGS HERE STORM DOOR Z BAR FRAME 28
33 Screen Enclosure 2 1/2 Extruded Wall System 1 3/4 or 3 Roof System Features Integrates with Legacy Storm Door Available in White, Almond & Bronze 29
34 Anchoring Details At Floor ¼ DIAM. EXPANSION 90 MPH WIND SPEEDS LOCATE 1 ANCHOR 4 FROM EACH MULLION AND 16 O.C. THEREAFTER ¼ X 3 LONG LAG 90 MPH WIND SPEEDS LOCATE 1 ANCHOR 4 FROM EACH MULLION AND 16 O.C. THEREAFTER ¼ X 3 LONG LAG 90 MPH WIND SPEEDS LOCATE 1 ANCHOR 4 FROM EACH MULLION AND 16 O.C. THEREAFTER BASE/TOP CAP SPLICE TO BE 8 MINIMUM FROM VERTICAL MULLION BASE/TOP CAP SPLICE TO BE 8 MINIMUM FROM VERTICAL MULLION BASE/TOP CAP SPLICE TO BE 8 MINIMUM FROM VERTICAL MULLION ALUM. FLASHING ALUM. FLASHING Screen Enclosure EXISTING OR NEW CONCRETE SLAB IN GOOD CONDITION SILICONE SEALANT REQUIRED TO PREVENT WATER INFILTRATION BEARING WALL SECTION CONCRETE INSTALLATION EXISTING OR NEW WOOD DECK IN GOOD CONDITION SILICONE SEALANT REQUIRED TO PREVENT WATER INFILTRATION BEARING WALL SECTION WOOD DECK INSTALLATION INSULATED STRUCT. DECK PANELS BEARING WALL SECTION THERMAL FLOOR PANEL INSTALLATION SUBSTRATE DETAILS WOOD MIN. 1.5 EMBEDMENT MIN EDGE DISTANCE CONCRETE MIN EMBEDMENT MIN. 2.5 EDGE DISTANCE SILICONE SEALANT REQUIRED TO PREVENT WATER INFILTRATION 30
35 Screen Enclosure Installation: F113 #10 WOOD 16 O.C. FOR WOOD ¼ 24 O.C. FOR CONCRETE EXISTING WALL F210 NOTE: OVERALL DIMENSIONS DETERMINED BY EXISTING OPENING OF STRUCTURE. Step 1: Receptor & Stud Connection to Wall #8 TEK THROUGH RECEPTOR ALL VERT. FRAMING #10 TEK W/ WASHER THROUGH ROOFING INTO TOP TRACK 1 Screen Enclosure 1 TRACK TO POST AT WALL 2 F113 #8 TEK THROUGH RECEPTOR ALL VERT. FRAMING F113 2 SEE ANCHORING DETAILS ON PREVIOUS PAGE Step 2: Top & Bottom Track Connection 31
36 NOTE: SOLID PANEL DIMENSIONS ARE VARIABLE. NOTE: APPLICATION OF SEALANT REQUIRED BETWEEN WALL PANEL AND EXTERIOR LEG OF BOTTOM TRACK TO PREVENT WATER INFILTRATION. F215 Step 3: Corner Post Installation Screen Enclosure #10 TEK W/ WASHER THROUGH ROOFING INTO TOP TRACK EXISTING WALL 3 F EXISTING WALL F113 & F210 F215 NOTE: Wall framing installation typical of Steps F113 CORNER POST AT TOP TRACK (BOTTOM TRACK TYPICAL) Step 4: Opposite Wall Framing 32
37 #8 TEK THROUGH ALL FRAMING INTO PANEL SKIN F115 F112 4 #8 TEK THROUGH F112 INTO CORNER POST 4 SOLID PANEL TO ASSEMBLY F112 Step 5: Solid Panel Assembly & Installation (Optional) #8 TEK THROUGH ALL CHAIR RAIL INTO R260 R260 5 Screen Enclosure 5 #8 TEK THROUGH R260 INTO POST F115 F210 CHAIR RAIL ATTACHMENT Step 6: Chair Rail & Screen Mullion Placement 33
38 F115 F210 F112 PREASSEMBLED SCREEN DOOR (OPTIONAL) F210 Screen Enclosure Step 7: Repeat Steps 5 through 6 (Screen Door Optional) FULL HEIGHT SOLID PANEL (OPTIONAL) Step 8: Repeat Steps 5 7 Step 9: Finish Wall with Solid Panel 34
39 6 SCREEN ATTACHMENT ROLL SPLINE ( FLAT SPLINE) INTO SCREEN POCKET WITH SPLINE TOOL (TYP.) Step 10: Prepare Screen Cloth Screen Enclosure NOTE: Installation Steps provide instruction for both Full Height Screening & the use of solid panels. Installation varies based on host structure. Step 11: Finish Enclosure 35
40 Installation: Storm Doors NOTE: DETAIL IS TYPICAL OF STORM DOOR INSTALLED USING Z BAR FRAME Screen Enclosure F210 Step 1: Storm Door Z Bar Frame Attachment DOOR PANEL SWINGS HERE STORM DOOR Z BAR FRAME 36
41 Patio Cover / Car Shield Features 4 x 4 or 6 x 6 Extruded Post Options Available in White, Almond, Bronze 1 3/4 or 3 Roof System and Optional Wood Grains 2 x 6 Extruded Beams 37
42 Anchoring Details At Floor ¼ DIAM. EXPANSION 90 MPH WIND SPEEDS LOCATE 2 ANCHORS PER BASE PLATE (STAGGERED) ¼ X 3 LONG LAG 90 MPH WIND SPEEDS LOCATE 4 ANCHORS PER BASE PLATE ¼ X 3 LONG LAG 90 MPH WIND SPEEDS LOCATE 4 ANCHORS PER BASE PLATE BASE PLATE AT EACH POST LOCATION BASE PLATE AT EACH POST LOCATION BASE PLATE AT EACH POST LOCATION Patio Cover / Car Shield EXISTING OR NEW CONCRETE SLAB IN GOOD CONDITION BASE PLATE SECTION CONCRETE INSTALLATION EXISTING OR NEW WOOD DECK IN GOOD CONDITION BASE PLATE SECTION WOOD DECK INSTALLATION INSULATED STRUCT. DECK PANELS BASE PLATE SECTION THERMAL FLOOR PANEL INSTALLATION SUBSTRATE DETAILS WOOD MIN. 1.5 EMBEDMENT MIN EDGE DISTANCE CONCRETE MIN EMBEDMENT MIN. 2.5 EDGE DISTANCE 38
43 Installation into Existing Structure: SEE ANCHORING DETAILS AT SILL ON PREVIOUS PAGE F225 NOTE: OVERALL DIMENSIONS DETERMINED BY EXISTING OPENING OF STRUCTURE. Step 1: Post Bracket Connection to Floor Patio Cover / Car Shield (2) #8 TEK THROUGH POST INTO BRACKET AT EACH SIDE OF POST F POST CONNECTION AT BASE PLATES Step 2: Post Connection 39
44 F217 (2) #8 TEK THROUGH POST INTO BEAM AT EACH SIDE OF POST 2 Patio Cover / Car Shield 2 #10 WOOD 12 O.C. OR ¼ 24 O.C. FOR CONCRETE ALL VERT. FRAMING BEAM CONNECTION AT POSTS Step 3: Corner Post Installation NOTE: POSTS CAN BE FACTORY MACHINED OR CUT ON SITE. IF FACTORY MACHINED PLEASE SPECIFY QUANTITY AND TYPE: SINGLE PUNCH OR PASS THORUGH F121 EXISTING WALL 3 3 ATTACHMENT HEADER TO WALL Step 4: Attachement Header Installation 40
45 ROOF PANEL (VARIES) Step 5: Roof Panel Attachment NOTE: SEE ROOF PANEL INSTALLATION DETAILS FOLLOWING THESE INSTRUCTIONS MUST APPLY SILICONE SEALANT AT ALL ROOF PANEL SEAMS Patio Cover / Car Shield Step 6: Repeat Step 5 to Finish Roof 41
46 F117 F117 Patio Cover / Car Shield Step 7: Attachment of Facia Strips Step 8: Finish Cover 42
47 Installation: Free Standing Option: F217 2 Step 1: See Steps 1 3 of Previous Installation Method F225 NOTE: POSTS CAN BE FACTORY MACHINED OR CUT ON SITE. IF FACTORY MACHINED PLEASE SPECIFY QUANTITY AND TYPE: SINGLE PUNCH OR PASS THROUGH F216 Patio Cover / Car Shield 1 Step 2: Measure and install base clips and posts (typical) 43
48 2 Patio Cover / Car Shield Step 3: Attach beams into post slots NOTE: OMIT USE OF WALL CLIP IN FREE STANDING INSTALLATION. SEE CONNECTION AT BEAM IN ROOFING PANLE DETAILS MUST APPLY SILICONE SEALANT AT ALL ROOF PANEL SEAMS Step 3: Repeat Steps 5 8 of Previous Installation 44
49 Installation: Roofing Panel Details (All Products Typical) WALL CLIP DETAIL #8 TEK 16 O.C. NOTE: COMPONENTS ARE DEPENDENT UPON SYSTEM. INSTALLATION REMAINS COMMON. #10 WOOD 12 O.C. OR ¼ 24 O.C. FOR CONCRETE /CMU WALL EXISTING WALL EXPANDED POLYSTYRENE CORE ROOF SPLICE CONNECTION DETAIL ALUMINUM SKIN APPLY BEAD OF SILICONE SEALNT FASCIA CONNECTION DETAIL Roof Panels MITER ALL CORNERS ROOF PANEL (TYPICAL) CONTINUOUS BEAD OF SEALANT ALONG CLIP MALE ROOF PANEL FEMALE ROOF PANEL H117 OR F117 45
50 CONNECTION AT BEARING WALL 4 SEASON ENCLOSURE CONNECTION AT BEARING WALL 3 SEASON & SCREEN ENCLOSURE #10 TEK SCREW W/ S.S. NEOPRENE BACKED WASHER SPACED 16 O.C. ROOF PANEL #10 TEK SCREW W/ S.S. NEOPRENE BACKED WASHER SPACED 16 O.C. ROOF PANEL H115 PICTURED (H113 OPTIONAL) F113 Roof Panels CONNECTION AT BEARING WALL PATIO COVER/CAR SHIELD #10 TEK SCREW W/ S.S. NEOPRENE BACKED WASHER SPACED 16 O.C. ROOF PANEL MAXIMUM PANEL OVERHANG: 24 F217 F216 46
51 ROOF RIDGE DETAIL ALUMINUM CAP FLASHING #10 TEK SCREW W/ S.S. NEOPRENE BACKED WASHER SPACED 16 O.C INTO BEAM. SPRAY FOAM ALUMINUM OR WOOD BEAM ROOF PANEL CEILING FAN MOUNTING DETAIL ROOF PANEL Installation Misc. 1 X 2 EXTRUDED ALUMINUM FAN SUPPORT & ELECTRICAL RACEWAY LAMINATED INTO ROOF PANEL UL APPROVED FIXTURE BOX ATTACHED VIA #12 TEK SCREWS 47
52 Windows of Opportunity Fort Worth, Texas Toll Free Fax
Introduction...COMB-2 Design Considerations and Examples...COMB-3
SECTION DIRECTORY General Information Introduction...COMB-2 Design Considerations and Examples...COMB-3 Combination Assembly Recommendations and Limitations Composite Configurations...COMB-4 Typical Sealant
Use steel clip angle as a drill template and drill through mullion. Install bolts with bolt heads on the masonry side of the jamb mullion.
Additional 200xpt and 250xpt installation instructions are shown on page 11. STICK METHOD ERECTION (refer to figures 1 and 2) Step 1 Establish all control lines and grades. Step 2 Attach steel intermediate
FIXED WINDOW SECTION DETAILS
FIXED WINDOW SCALE " = '-0" FIXED WINDOW SECTION PROFILE @ HEAD SCALE '-0" = '-0" FIXED WINDOW SECTION PROFILE @ JAMB SCALE '-0" = '-0" FIXED WINDOW SECTION PROFILE @ SILL SCALE '-0" = '-0" NAO84 STEEL
803 Airport Rd Terrell, TX (972) RELIANCE-TCIG -THERMAL COMPOSITE CURTAIN WALL - 2 1/2 x 6 -
803 Airport Rd Terrell, TX 75160 (972) 551-6100 RELIANCE-TCIG -THERMAL COMPOSITE CURTAIN WALL - 2 1/2 x 6 - Table of Contents (Drawing numbers ie V8501 used as CAD detail reference only ) Elevation_Rcw-TCIG_600
803 Airport Rd Terrell, TX (972) RELIANCE-TCIG -THERMAL COMPOSITE CURTAIN WALL - 2 1/2 x 7 1/4 -
803 Airport Rd Terrell, TX 75160 (972) 551-6100 RELIANCE-TCIG -THERMAL COMPOSITE CURTAIN WALL - 2 1/2 x 7 1/4 - Table of Contents (Drawing numbers ie V8401 used as CAD detail reference only ) Elevation_Rcw-TCIG_725
YCU 750 TU Unitized Curtain Wall System
ASSEMBLY INSTRUCTIONS Assembly Manual 2009 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................ Page ii PARTS
Vinyl French Door Assembly Instructions
Vinyl French Door Assembly Instructions SERIES FD 5455/5555 Para instrucciones en español, visite: http://bit.ly/pgtassemblyinstructions FD 5455 / 5555 Parts List ITEM 1 FD 5455/5555 PARTS LIST FRAME HEAD
1Perma-Shield Gliding Doors (PSI 1968 to 1978)
1Perma-Shield Gliding Doors (PSI 1968 to 1978) Parts Catalog Main Menu Section TOC Search What s in This Section 2-Panel, 3-Panel, and Sidelights...................................... Page 3 Parts Illustration...........................................................
1Perma-Shield Gliding Doors (PSI 1968 to 1978)
1Perma-Shield Gliding Doors (PSI 1968 to 1978) Parts Catalog Main Menu Section TOC Search What s in This Section 2-Panel, 3-Panel, and Sidelights...................................... Page 3 Parts Illustration...........................................................
Series SSG and Captured corner mullion. Installation Instructions
Series 5500 SSG and Captured corner mullion Installation Instructions Part NO. Y556 February 2013 SECTION TABLE OF CONTENTS S-5500 SSG and Captured Corner Mullion Installation Instructions PAGE I. General
FG-1000 Storefront - Center Set 1-3/4 x 4
FG-1000 Storefront - Center Set 1-3/4 x 4 Table of Contents (Drawing numbers ie H4701 used as CAD detail reference only ) Elev-Fg1000-Storefront H4701-Horizontal-Outside Glaze H4702-Head-Horizontal H4706-Stacked-Horizontal-Out
apexfacades.com apexfacades.com Printed on 12/12/17
M E R I D I A N apexfacades.com 1.866.970.5948 apexfacades.com 4 5 0 T 1.0 H E R M A L L Y B R O K Meridian E N Pg- 1 S T O R E F R O N T THIS PAGE INTENTIONALY LEFT BLANK apexfacades.com 1.0 Meridian
BuildingEnvelope Oldcastle ( ) -
BuildingEnvelope 1-866-Oldcastle (653-2278) - www.obe.com FG-1000 STOREFRONT 1-3/ X / 1/ GLAZING / CENTER SET Elev-Fg1000-CenterSet H4701-Horiz-OutsideGlz H4702-Head-OutsideGlz H4703-Sill-OutsideGlz-10PSF
AMS MU800 Mullion Drained Curtain Walling
SPECIFICATION AMS MU800 Mullion Drained Curtain Walling The AMS MU800 mullion drained curtain walling system offers unique architectural design features combined with market leading weather performance.
Reliance-TC-Type l Standard Horizontals-Aluminum Pressure Plates Integral TC Verticals w/o Face Cap - 2-1/2 x7-1/4
Reliance-TC-Type l Standard Horizontals-Aluminum Pressure Plates Integral TC Verticals w/o Face Cap - 2-1/2 x7-1/4 Table of Contents (Drawing numbers ie H3405 used as CAD detail reference only ) Elev-RcwTC-Type
SECTION SPECIFICATIONS PART 1 GENERAL
PART 1 GENERAL 1.1 SECTION INCLUDES A. Shower doors. B. Sliding enclosures. C. Shower doors and panels. 1.2 RELATED SECTIONS A. Section 06100 - Rough Carpentry; blocking. B. Section 15400 - Plumbing Fixtures
Reliance-TC-Type l Standard Horizontals-Aluminum Pressure Plates Integral TC Verticals w/o Face Cap - 2-1/2 x 6
Reliance-TC-Type l Standard Horizontals-Aluminum Pressure Plates Integral TC Verticals w/o Face Cap - 2-1/2 x 6 Table of Contents (Drawing numbers ie H3505 used as CAD detail reference only ) Elev-RcwTC-Type
Reliance-TC-Type ll Thermal Composite Type ll - Horizontals and Verticals w/ Aluminum Pressure Plate - 2-1/2 x 7-1/4
Reliance-TC-Type ll Thermal Composite Type ll - Horizontals and Verticals w/ Aluminum Pressure Plate - 2-1/2 x 7-1/4 Table of Contents (Drawing numbers ie H6404 used as CAD detail reference only ) Elev-RcwTC-Type
250 SERIES 1" STRUCTURAL TUBE MULLION ASSEMBLY INSTRUCTIONS
2014 Pella Corporation Part Number: V985711 250 SERIES 1" STRUCTURAL TUBE MULLION ASSEMBLY INSTRUCTIONS Be sure to thoroughly read and understand all the steps before beginning the mullion assembly process.
Reliance-TC-Type ll Thermal Composite Type ll - Horizontals and Verticals w/ Aluminum Pressure Plate - 2-1/2 x 6
Reliance-TC-Type ll Thermal Composite Type ll - Horizontals and Verticals w/ Aluminum Pressure Plate - 2-1/2 x 6 Table of Contents (Drawing numbers ie H6504 used as CAD detail reference only ) Elev-RcwTC-Type
BuildingEnvelope Oldcastle ( ) -
BuildingEnvelope 1-866-Oldcastle (653-2278) - www.obe.com FG-3000 STOREFRONT 2" X 4-1/2" / Elev-Fg3000-CenterSet H0601-Horiz-OutsideGlz H0602-Head-OutsideGlz H0603-Sill-OutsideGlz-10psf H0604-Sill-OutsideGlz
YCU 750 TU Unitized Curtain Wall System
INSTALLATION INSTRUCTIONS 1 2 Installation Manual 2010 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................ Page
RELIANCE-SS CURTAIN WALL INSTALLATION AND GLAZING MANUAL
RELIANCE-SS CURTAIN WALL INSTALLATION AND GLAZING MANUAL Note: The installation details found in this package are generic and are for representation only with the intent of giving the installation team
YCW 750 SplineTech Shop Glazed Curtain Wall System Installation Manual
YCW 750 SplineTech Shop Glazed Curtain Wall System Installation Manual 2009 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................
Installation Instructions for the Rolltec Physique XL Awning
Installation Instructions for the Rolltec Physique XL Awning Questions? Call Rolltec at 1-800-667-0474 General Tool Requirements Table of Contents Available installation brackets Side dimensions of various
porch & patio enclosures
porch & patio enclosures garages. they re not just for cars anymore. Do you want to turn the garage into a gym, hobby room or play room? Or do you simply want to enjoy bug-free ventilation? Affordable
Reliance-HTC Curtain Wall 2 Glazing x 2-1/2 x 10-1/4
Reliance-HTC Curtain Wall 2 Glazing x 2-1/2 x 10-1/4 Table of Contents (Drawing numbers ie H9832 used as CAD detail reference only ) Elev_Rcw-HTC-175glz-10in-Capt Elev_Rcw-HTC-175glz-10in-SSG H9831-Head-175glz
Reliance-HTC Curtain Wall 2 Glazing x 2-1/2 x 7-1/2
Reliance-HTC Curtain Wall 2 Glazing x 2-1/2 x 7-1/2 Table of Contents (Drawing numbers ie H9802 used as CAD detail reference only ) Elev_Rcw-HTC-175glz-10in-Capt Elev_Rcw-HTC-175glz-10in-SSG H9801-Head-175glz
DOOR - Single Leaf, Premium Duty, Quick-Acting Model 1430 Features 1
DOOR - Single Leaf, Premium Duty, Quick-Acting Model Features 1 FREEMAN MARINE Quick-Acting doors feature patented chain-drive, single actuation dogging. This design feature allows for quick-acting doors
ICR-225 WINDOW WALL SYSTEM B - 2-1/4 x 6. Table of Contents (Drawing numbers ie V8761 used as CAD detail reference only )
ICR-225 WINDOW WALL SYSTEM B - 2-1/4 x 6 Table of Contents (Drawing numbers ie V8761 used as CAD detail reference only ) Elev-ICR-225-System B-6.00in H8707-Intermediate Horizontal H8751-Head Horizontal
hurricane resistant window wall systems
hurricane resistant window wall systems Table of Contents (SG) (SG) Table of Contents Finish Information page 2 RW-5000 StormMax 2-1/2" x 5" Wet Glazed Monolithic Laminated Glazing Extrusions page 3 RW-5000
70 WALL FABRICATION - SEALANT - ERECTION
70 WALL FABRICATION - SEALANT - ERECTION GENERAL INSTALLATION NOTES SECTION 1 General Information................................... 3 Assessing the Opening................................. 4 SECTION
Reliance-HTC Curtain Wall 1-3/4 Glazing x 2-1/2 x 10
Reliance-HTC Curtain Wall 1-3/4 Glazing x 2-1/2 x 10 Table of Contents (Drawing numbers ie H9732 used as CAD detail reference only ) Elev_Rcw-HTC-175glz-10in-Capt Elev_Rcw-HTC-175glz-10in-SSG H9731-Head-175glz
Reliance-HTC Curtain Wall 1-3/4 Glazing x 2-1/2 x 7-1/4
Reliance-HTC Curtain Wall 1-3/4 Glazing x 2-1/2 x 7-1/4 Table of Contents (Drawing numbers ie H9702 used as CAD detail reference only ) Elev_Rcw-HTC-175glz-10in-Capt Elev_Rcw-HTC-175glz-10in-SSG H9701-Head-175glz
Structural Mullion System
Structural Mullion System Installation Instructions DNA Part Number 10300085 This system is designed to allow for larger window combinations. It is not intended to replace structural members in a building.
PRODUCT INFORMATION MANUAL SECTION: 17 METAL LOUVRE AWNINGS METAL LOUVRE AWNINGS
METAL LOUVRE AWNINGS Sizes & Limitations Metal Louvre Awnings TRINIDAD TRINIDAD SUNGUARD FIXED ADJUSTABLE Maximum Width Unlimited 5000mm Unlimited Minimum Width 500mm 500mm 500mm Maximum Drop 4000mm 2500mm
Installation Instructions for the Rolltec Adalia X3M Extenda Awning
Installation Instructions for the Rolltec Adalia X3M Extenda Awning Questions? Call Rolltec at 1-800-667-0474 General Tool Requirements Table of Contents Available installation brackets Side dimensions
Architectural Manual. Thermally Improved Aluminum Series Windows & Patio Doors
Architectural Manual Thermally Improved Aluminum Series Windows & Patio Doors Instructions on how to use this manual: This document has been designed for easy navigation and to quickly click to the section
Sunshade System / Air Foil
Sunshade System / Air Foil 2-1/8 Air Foil x 16 56-63-200 4 Air Foil x 24 56-63-400 Wall:.080 ENGINEERING AVAILABLE UPON REQUEST Florida items are available to all branches via shuttle. 6 Air Foil x 24
4 1 2" System Depth Dry Glazing Compatible with a variety of Windspec doors and operable windows Available in anodized and painted finishes
THE 655 SERIES ENHANCES THE POPULAR FLUSH GLAZING SYSTEM BY INCREASING ITS THERMAL PERFORMANCE. BY UTILIZING AN ADVANCED GLASS-REINFORCED NYLON THERMAL BREAK, THE 655 SERIES RAISES OUR TRADITIONAL FLUSH
Visions 3000 Series 9404 Parts Catalog
3000 Series Visions 3000 Series 9404 Parts Catalog #1218587 FOR PRODUCT PRODUCED AFTER 4/07 Slider Single Slider Triple Slider (1/4-1/2-1/4) Triple Slider (Equal Sash) Mull/Stack/Picture/Transom mull/stack
ASTM E 1886 and ASTM E 1996 TEST REPORT. Report No.: A Rendered to: CORAL ARCHITECTURAL PRODUCTS Tuscaloosa, Alabama
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: A2651.02 401 44 Rendered to: CORAL ARCHITECTURAL PRODUCTS Tuscaloosa, Alabama PRODUCT TYPE: 90 Corner Curtain Wall SERIES/MODEL:
Louvre Specifications
Louvre Specifications Louvre System Components 01. Louvre windows shall be Kool Vu as manufactured by Pty Ltd. 0. Louvre channel frame shall be in extruded architectural grade 0 T aluminium. New Clips
BASIC FIRE DOOR REQUIREMENTS TECHNICAL DATA SHEET NO. 401
BASIC FIRE DOOR REQUIREMENTS SHEET NO. 401 Fire door openings are classified by their locations in the building. The location determines the length of exposure protection required, based on the potential
Assembly Instructions
Universal Table/Desk for All Sizes of Panel Wall Beds Assembly Instructions ** 5 YEAR WARRANTY ** Designed to Exceed International ISO 9002 Standards for Residential Specifications - Patent Pending - Exploded
Series 2050 Garden Window Frequently Asked Questions
1. What is the difference between new construction and retrofit? The difference is in the overall jamb depth and required components: For new construction, the flash flange on the head of the unit is left
DURA WHEEL CHAIR LOCKER ASSEMBLY INSTRUCTIONS
DURA WHEEL CHAIR LOCKER ASSEMBLY INSTRUCTIONS 1. Locate a Frame and Door: Start by locating a frame and door. 2. Front Frame: Now stand up the frame and door in the desired assembly area. 3. Exterior Wall:
Installation Instructions for the Rolltec Bravo Awning
Installation Instructions for the Rolltec Bravo Awning Questions? Call Rolltec at 1-800-667-0474 Table of Contents Available installation brackets Side dimensions of various installations Determining installation
JOINING MULLION (DIRECT MULL) ASSEMBLY INSTRUCTIONS FOR 3-WAY OR 4-WAY JOINTS FOR IMPERVIA AWNING, CASEMENT AND LARGE AWNING
2014 Pella Corporation JOINING MULLION (DIRECT MULL) ASSEMBLY INSTRUCTIONS FOR 3-WAY OR 4-WAY JOINTS FOR IMPERVIA AWNING, CASEMENT AND LARGE AWNING For Additional Mullion Assembly Information; Visit www.installpella.com/mullions,
YCW 750 SSG Structural Silicone Glazed Curtain Wall System 4 Side SSG Shop Glazed (2 Side Toggle Glazing Method) Installation Manual
YCW 750 SSG Structural Silicone Glazed Curtain Wall System 4 Side SSG Shop Glazed (2 Side Toggle Glazing Method) Installation Manual 2014 YKK AP America Inc. is a subsidiary of YKK Corporation of America.
Storm Windows. Tru-Channel. Comparative Air Infiltration Rates (CFM/FCP) The lower the number, the better the performance.
Storm Products Storm Windows Tru-Channel When new replacement windows are not an option, whether for budgetary or historical maintenance reasons, Harvey Tru-Channel aluminum storm windows are an excellent
MetroView TM FG 501T Window Wall
JULY, 0 FEATURES Features is an inside glazed system -/" (.) sight line with standard " () system depth IsoLock TM lanced pour and debridged /" (.) thermal break Screw spline fabrication and joinery Standard
Operation, Cleaning & Maintenance. For Aluminium Secondary
, Cleaning & Maintenance For Aluminium Secondary Contents Horizontal Sliders 3 Vertical Sliders - Non-Balanced 4 Vertical Sliders - Balanced 5 Vertical Sliders - Tilt Back 6-7 Lift Outs 8 Hinged Units
SCREENS TABBED PAGE SCREENS
SCREENS TABBED PAGE Index Page Bug Flaps.................................. 11 Crossbar................................... 2 Frame..................................... 2, 3 Handles...................................
. crealco C A S E M E N T Index Legal Disclaimer 5 Profile Identification 6-8 Hardware Identification 9 New Crimper 10 Butterfly Gasket and Wed
. crealco C A S E M E N T 3 0. 5 CASEMENT 30.5 PRODUCT MANUAL 2013 Wispeco (Pty) Ltd, All Rights Reserved Revision: October 2013 . crealco C A S E M E N T 3 0. 5 Index Legal Disclaimer 5 Profile Identification
Arcade Windows. Architectural Design Manual. July 2014
s Architectural Design Manual July 2014 Table of Contents Layouts... 1 Cross Sections Details... 14 Mullion Cross Section Details... 22 Grill Patterns... 39 Grill Option Details... 46 Bracket Details...
COMP 6 Frame Parts. Comp (U1 REVISED) 6.1
COMP 6 Jamb Profiles...6.3 Head Jambs - Standard...6.4 Head Jambs - Arch and Radius...6.5 Head Jambs - Continous with 1 Sidelite and Double Doors...6.6 Head Jambs - Triple and Single with 2 Sidelites...6.7
Visual Presentation Drawings
Visual Presentation Drawings GLASS 8 7 3 8 7 3 8 0 48 4 47 4 GLASS WITH CUTOUT 8 CUTOUT 0 0 8 4 47 4 48 4 8 48 4 0 8 4 43 3 4 38 GLASS 8 43 3 4 38 5 5 54 5 6 54 7 8 8 8 54 7 8 54 5 6 304 4 NORTH Break
MINNKOTA WINDOWS SERVICE REPLACEMENT PARTS
universal snugger multi-point lock $0.60 (24 series) tie bar bracket $1.45 MINNKOTA WINDOWS SERVICE REPLACEMENT PARTS Truth Hardware and Parts 771 casement series $5.35 (w h, al) sash keepers $1.70 universal
storm windows Tru-Channel
Storm Products storm windows Tru-Channel When prime replacement windows are not an option, whether for budgetary or historical maintenance reasons, Harvey Tru-Channel aluminum storm windows are an excellent
OWNER S MANUAL: G5000 SLIDE-OUT AWNING SYSTEM
INSTALLATION, OPERATIONS, ADJUSTMENT AND REPAIR Rev. 08/01/12 1361 Calle Avanzado San Clemente California 92673 Office: (949) 259-4000 Toll Free: (800) 382-8442 Fax: (949) 276-5500 TABLE OF CONTENTS WARRANTY
SECTIONAL OVERHEAD DOORS
SECTIONAL OVERHEAD DOORS Why choose Insulated Sectional Overhead Doors? 25mm approx. 40mm This leaflet is offered as a guide for the Trade when presenting the arguments in favour of specification and selection
Item # BJ2PC With 8 Leg Frame, Cover, and Enclosure Kit with Windows Size: 10 8 Wide x 20 Long (Side Height 6 8 ) (Center Peak Height 9 9 )
Item # BJ2PC With 8 Leg Frame, Cover, and Enclosure Kit with Windows Size: 10 8 Wide x 20 Long (Side Height 6 8 ) (Center Peak Height 9 9 ) Powell & Powell Supply Company, L.L.C. Manufactured by: 1730
Wv410 window. Installation Instructions
Wv410 window Installation Instructions Part NO. Y007 February 2014 TABLE OF CONTENTS SECTION PAGE I. Product Description and Limitations..........3 II. General Statements and Definitions........3 III.
quick and easy installation guide
www.directdriveopener.com quick and easy installation guide Back 2 Front. Motor Carriage 2. C-rail. Chain. Limit stops. Slide in part (tensioner) Rail assembly Insert C-rail parts () into the connecting
Lockable Fasport. IFP-600 Dimensions Overall Height 9.5" Overall Width 10" Opening Dia. 6.5" Weight 9 lbs. Model
Lockable Fasport IFP-600 Overall Height 9.5" Overall Width 10" Opening Dia. 6.5" Weight 9 lbs Note: Specify glass thickness when ordering. Die cast body and lid. A12 Aluminum body and ASSA deadbolt. Steel
The safe & affordable install
QSLG1000 Quick-Sling SPECS QSLG1000 Each arm attaches to wood using 2 zip screws for stability & a 4 through bolt & wing nut for security. Installs to steel using steel beam adapters. 28 points of anti-vibration
SOLHARO ASSEMBLY & INSTALLATION INSTRUCT IONS
A. Introduction: SOLHARO ASSEMBLY & INSTALLATION INSTRUCT IONS Rev. 01/30/2012 The Solharo is an external, retractable, tensioned sun shading system designed to fit over a sunroom or wood pergola. The
Awning Windows Premium Atlantic Vinyl
TABLE OF CONTENTS Specifications... 2-2 QuickSpecGuide... 2-3 Elevations/Sizes: 1/4 Scale FullAwning... 2-4 GlazingOptions: 3 Scale... 2-6 Grille Patterns... 2-7 SectionDetails: 6 Scale... 2-8 JELD-WEN
Installation Accessories and Applications
SECTION DIRECTORY Installation Accessories and Applications Introduction...W-IA-2 Window Attachment Options...W-IA-4 Subsill...W-IA-6 Exterior Mullions...W-IA-8 Mullion Cover Application...W-IA-10 Mullion
Z-PURLIN MOUNTING WARNING:
Z-PURLIN MOUNTING WARNING: Big Ass Fans should not be installed unless the structure on which the fan is to be mounted is of sound construction, undamaged, and capable of supporting the loads of the fan
Installation Instructions Supertop NX
Installation Instructions Supertop NX Vehicle Application: Jeep Wrangler Unlimited 2004 2006 Part Number: 54721 www.bestop.com - We re here to help! Visit our web site and click on Ask a Question. Click
* * 4023 KR. Step 1 Prepare the Keyed Removable Unit. Not for use on electric or fire rated removable mullions
condition. *64009-00* 64009-00 Keyed Removable Mullions 403 KR Installation Instructions Not for use on electric or fire rated removable mullions This kit includes the following parts: (Not to scale) 5/6
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS KR54, KR1654, & KR4954 Keyed Removable Mullion NOT FOR USE ON ELECTRIC OR FIRE RATED MULLIONS. This kit includes the following parts: (Not to scale) WARNING Remove key, reinstall,
Factory Style Bow Kit
Installation Instructions Factory Style Bow Kit Vehicle Application: Jeep Wrangler Unlimited 2004 2006 Part Number: 55003 www.bestop.com - We re here to help! Visit our web site and click on Ask a Question.
Major Features of VWD Windows
Major Features of VWD Windows Feature for Feature, Benefit for Benefit, you get more with Vinyl Window Designs Ltd. 1 Ultra Style 800M/800TS Casement Series 1. Multi-chambered, fusion-welded frame and
TREASURE ISLAND FERRY SHELTER & BUS SHELTERS. Arts Commission Civic Design Review APRIL 18, 2016
TREASURE ISLAND FERRY SHELTER & BUS SHELTERS PHASE 3 - CD Arts Commission Civic Design Review APRIL 18, 2016 PHASE 2 COMMENTS/INFORMAL SESSION FOLLOW UP 1. Lighten up the concrete base of the Ferry Shelter
INSTALLATION INSTRUCTIONS for folding arm awnings
Custom made Awnings and Blinds Item No 0757 INSTALLATION INSTRUCTIONS for folding arm awnings IMPORTANT INFORMATION BEFORE INSTALLING YOUR Updated 08/09/15 AN AWNING INSTALLATION IS A HOME IMPROVEMENT
Owner s Manual & Installation Instructions. Model 900XT & 1000XT Awnings
Owner s Manual & Installation Instructions Do Not Discard, Retain for Future Reference Model 900XT & 1000XT Awnings WARNING: Failure to Follow These Instructions Could Result In Personal Injury! For Technical
INSTALLATION INSTRUCTIONS FOR BALCO, INC. FLOOR MATS FM2R-(A, C, D) W/O FRAME 4V
2626 South Sheridan PO Box 17249 Wichita, Kansas 67217 Phone: (316) 945-9328 Fax: (316) 945-0789 INSTALLATION INSTRUCTIONS FOR BALCO, INC. FLOOR MATS FM2R-(A, C, D) W/O FRAME 4V 2012, Balco, Inc. INSTALLATION
Setting Higher Standards in Aluminum
Setting Higher Standards in Aluminum PH Standard 1.0mm thickness Aluminum well-known brand (c) 2018 One Sky Philippines. All Rights Reserved Setting Higher Standards in Aluminum VISION After years of cultivation,
GET MORE USE OUT OF YOUR PORCH, PATIO, OR GARAGE.
PORCH, PATIO & GARAGE ENCLOSURES GET MORE USE OUT OF YOUR PORCH, PATIO, OR GARAGE. Those exposed or partially-exposed areas around your home are pretty nice on pleasant days. But when a light rain shower
Colonial and Grand Colonial Fire Pit Tables. Installation Instructions for
Colonial and Grand Colonial Fire Pit Tables Installation Instructions for Colonial-48-M-K, Col-48-MNB-K, Grand-Colonial-48-K, CM-48-DIN-K, MNB-48-DIN-K, GC-48-DIN-K, CM-48-PUB-K, MNB-48-PUB-K, GC-48-PUB-K
Price increase disclaimer prices subject to change without notice, see local representative or manufacturer for current prices. Greenfield Products
Greenfield Products 801 Cedar Cross Rd Dubuque, Iowa, 52003 563 583 1978 fax 563 582 6113 2/27/2012 Page Hi, I m Tim Greenfield, owner of Greenfield Products. For 50 years my family has been in the glass
markilux 990 the compact markilux cassette awning slender, practical, functional PATIO AND BALCONY AWNINGS safe timeless beautiful
PATIO AND BALCONY AWNINGS safe timeless beautiful rated to wind resistance class 2 (corresponds to Beaufort 5) the compact markilux cassette awning slender, practical, functional www.markilux.com markilux
MACO RAIL SYSTEMS SLIDING HARDWARE
TECHNOLOGY IN MOTION MACO SLIDING HARDWARE For a harmonic confluence inside and out LIFT&SLIDE HARDWARE PVC Re-define non-enclosed area as floor space in harmony with nature: to take a breath, let in light
INSTALLATION GUIDE INTRODUCTION
INSTALLATION GUIDE for for HotEdge Rail Rail INTRODUCTION HotEdge Rail is a patent pending one-piece roof edge ice melt systems engineered to easily install on standing seam, pro panel, and corrugated
HUNTCO SITE FURNISHINGS. Double Bike Locker Assembly Instructions HUNTCO SITE FURNISHINGS
Double Bike Locker Assembly Instructions Includes instructions for both handle styles. Padlock Handle with U Lock Box and Keyed Pop Out T Handle SITE FURNISHINGS SITE FURNISHINGS and architectural site
Closet and Specialty Hardware
Closet and Specialty Hardware Door & Mirror Hardware...100 Magnetic and Bullet Catches... 100 Sliding Door Pulls........................................ 100 Mirror Clips/Glass Clips, Fittings and Latches...
SECTION 5. Hardware and Optional Accessories for Steel Doors:
SECTION 5 Hardware and Optional Accessories for Steel Doors: Yale Grade 2 Cylindrical Lock Yale Grade 1 Cylindrical Lock Yale Mortise Lock Standard Duty Exit Device Heavy Duty Exit Device Standard Duty
Seven-eighths-spacing Rackmount Kit/Chassis Rackmount Kit. Techmar enclosure designs include interchangeable modular components,
SRK/CRK SERIES Seven-eighths-spacing Rackmount Kit/Chassis Rackmount Kit Techmar enclosure designs include interchangeable modular components, punched hole patterns and captive hardware, resulting in a
TCWS54 SEE THRU DIAMOND BURNER INSTALLATION KIT INSTRUCTIONS
INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this manual for future reference. These instructions are supplementary to the Installation and Operating Instructions supplied with the
Product Overview... 1 Component Checklist...2
INSTALLATION MANUAL FREEDOM AWNING RV MOTORIZED PATIO BOX AWNING TABLE OF CONTENTS Product Overview... 1 Component Checklist...2 Installation... 3 Installation Using an Awning Rail...3 Installation Using
PARTS LIST CHARGER 2022 ABLT
PARTS LIST CHARGER 2022 ABLT HEAD ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 5990731 SPRING CLIP PAD HOLDER SET INCLUDES: 1 101A 9120205 #8 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW PACK OF 3 3 102 9121490
FRAMELESS GLASS SLIDING FOLDING SYSTEM Sliding Folding System SPECIALISED SLIDING SYSTEMS
Sliding Folding System Sliding Folding Door System can be a very attractive and practical use of space, helping to create a contemporary design in your home and offices. Our well experienced person can
Core Systems Installation Instructions
185-3017 185-3018 185-3517 607-0149 WLH 09/17/18 TABLE OF CONTENTS ***Assembly*** Roller Tube Assembly Roller Tube Assembly... Standard Application Attaching Tarp to Roller Tube - Standard... Installing
INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL AWNINGS. For trailers & motor homes with straight sides TOOLS REQUIRED
AWNINGS INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL For trailers & motor homes with straight sides TOOLS REQUIRED 1/4" electric drill Ratchet handle kit 3/8" & 7/16" socket No. 1 and No. 2 screwdriver
TUCSON PATIO AWNING INSTALLATION MANUAL
TUCSON PATIO AWNING INSTALLATION MANUAL Toll Free 877-792-1775 Fax 877-792-0031 swsuncontrolpro.com sales@swsuncontrol.com 1 INTRODUCTION...3 1.1 Symbols used in this manual... 3 1.2 Personnel requirements...
SAFETY GUIDELINES FOR DIY TENTS
SAFETY GUIDELINES FOR DIY TENTS Please read carefully and fully before starting assembly of the tent 1. The installer is solely responsible for evaluating the site and proper securing method determined.
Product Cut Sheet Z4-SERIES SEISMICFRAME CABINET SYSTEM SERVICE PARTS
Service Parts This document lists service parts for the Z4 SeismicFrame Cabinet System. Service parts include mounting rails, top panel, side panels, doors and door lock kits and are used as replacement