Reliance-TC-Type ll Thermal Composite Type ll - Horizontals and Verticals w/ Aluminum Pressure Plate - 2-1/2 x 6

Size: px
Start display at page:

Download "Reliance-TC-Type ll Thermal Composite Type ll - Horizontals and Verticals w/ Aluminum Pressure Plate - 2-1/2 x 6"

Transcription

1 Reliance-TC-Type ll Thermal Composite Type ll - Horizontals and Verticals w/ Aluminum Pressure Plate - 2-1/2 x 6 Table of Contents (Drawing numbers ie H6504 used as CAD detail reference only ) Elev-RcwTC-Type ll-alum-600 H6501-Head-Horizontal H6502-Horizonta H6504-Sill H6508-Roll Over Horizontal H6509-Roll Under Horizontal H6518-Pocket-Frame-OperWin H6519-Flat-FrameOperWin V6501-Jamb V6502-Vertical-Mullion V6505-Heavy-Mullion V6509-Mullion-w-Operable Window V Inside Corner V Outside-Corner H0042-Steel-Anchor H6425-F-T-Anchors H6543-Intermediate Mullion Splice H OSC Mullion Splice February 2016

2 February Oldcastle ( ) Elev-RcwTC-TypeII-Alum-600 H6425 H6501 V ISC V OSC V6521 V6502 V6505 STEEL H0042 ANCHOR SPLICE H6543 H6444 V6509 TYP. HORIZ. H6505 H6518 H6519 OPERABLE WINDOW H6508 ROLL OVER HORIZ. H6509 ROLL UNDER HORIZ. H6425 MODEL: Elev-Rcw-TC-Type II-600 RELIANCE-TC TYPE ll VERTICALS & HORIZONTALS ALUMINUM PRESSURE PLATE H6504

3 February Oldcastle ( ) H6501-Head GP-103 EPDM GASKET (TYP.) BACKER ROD/SEALANT (BY OTHERS) WW-122 POCKET FILLER "T" ANCHOR AT MULL "F" ANCHOR AT JAMB 2 1/2" WW-110 FACE AW-426 HEAD AW SHR BLK AT JAMB & INTERMEDIATE MULLS AW SHEAR BLOCK AT 90 OSC (SINGLE MULL) ATTACH TO MULLION W/ (2) FS-9 #14 X 1 1/2" HH ATTACH TO HORIZ W/ (2) FS-115 #10 X 1" PPH SEAL PRIOR TO INSTALLING HORIZONTAL GP-103 EPDM GASKET (TYP.) 1" GLASS 6" Reliance-TC Type ll Head - H6501

4 February OLDCASTLE ( ) H6504-Sill

5 February OLDCASTLE ( ) H6505-Horiz

6 February OLDCASTLE ( ) H6508-Roll-Over-Horiz

7 February OLDCASTLE ( ) H6509-Roll-Under-Horiz

8 February OLDCASTLE ( ) H6518-Pocket-Frame-OperWin

9 February OLDCASTLE ( ) H6419-Flat-Frame-OperWin

10 February Oldcastle ( ) V6501-Jamb AW-420 JAMB SHEAR BLOCK AT HORIZONTALS. SEE HORIZ VIEW FOR INFO BACKER ROD/SEALANT (BY OTHERS) WW-122 WW-162 PRESSURE PLATE W/GP-108 ISOLATOR. FIELD ATTACH WITH FS-325 #12-14 X 1 1/2" HWH 9" O.C. 6" WW-110 FACE CAP 1" GLASS 2 1/2" Reliance -TC Type ll Jamb- V6501

11 February Oldcastle ( ) V6502-Mullion AW-420 MULLION SHEAR BLOCK AT HORIZONTALS. SEE HORIZ VIEW FOR INFO 6" GP-103 EPDM GASKET (TYP.) 1" GLASS 2 1/2" WW-110 FACE CAP WW-162 PRESSURE PLATE Reliance -TC Type ll Intermediate Mullion - V6502

12 February Oldcastle ( ) V6505-Heavy-Mullion AW-430 MULLION SHEAR BLOCK AT HORIZONTALS. SEE HORIZ VIEW FOR INFO 6" GP-103 EPDM GASKET (TYP.) 1" GLASS 2 1/2" WW-110 FACE CAP WW-162 PRESSURE PLATE Reliance -TC Type ll Heavy Mullion - V6505

13 February Oldcastle ( ) V6509-Mullion-w-Opwin AW-420 MULLION "Flat frame" operable window (go to/architectural-windows for the most current details and vent options WW-122 POCKET FILLER ATTACH W/FS " O.C. WW-110 FACE CAP 2 1/2" Reliance -TC Type ll Operable Window - V6509

14 February Oldcastle ( ) V ISC-2-Mull AW-420 MULLION AN-1 ALUM ANGLE (3/4"x 3/4" x 1/8") SHEAR BLOCK AT HORIZONTALS. SEE HORIZ VIEW FOR INFO WW-122 POCKET FILLER.125" FORMED ALUM CLOSURE AN-1 ALUM ANGLE SHOP ATTACHED AT HEAD & SILL FOR PERIMETER SEALANT 6" BACKER ROD/SEALANT (BY OTHERS) WW-110 FACE CAP WW-162 PRESSURE PLATE 2 1/2" 1/2" Reliance -TC TYPE ll 90 Inside Corner - V6517

15 February Oldcastle ( ) V Outside-Corner AW-270 MULLION CW-823 FILLER WW T-ANCHOR SHEAR BLOCK AT HORIZONTALS. SEE HORIZ VIEW FOR INFO 6" WW-323 MULL CAP WW-115 FACE CAP WW-162 PRESSURE PLATE 3 3/4" Reliance -TC Type ll 90 Outside Corner - V6521

16 February Oldcastle ( ) H0042-Steel-Anchor WELD AS REQUIRED BY INSTALLER TAP PLATE WITH TAPPED HOLES FOR ANCHOR BOLT ANCHOR BOLT (BY OTHERS) HOLE IN ANCHOR AT DEAD LOAD SLOT IN ANCHOR AT WIND LOAD 1/16" NYLON SLIP PAD BY INSTALLER Plan View Jamb Option Plan View Intermediate Mullion STEEL ANCHOR (BY OTHERS) FLOOR SLAB ACCESS HOLE Plan View Jamb Option Plan View Inside - Outside Corner Standard Curtainwall Steel Anchor - H0042

17 February Oldcastle ( ) H6425-F-TAnchors "F" ANCHOR (SEE CHART) "T" ANCHOR (SEE CHART) TYPICAL SHEAR BLOCK HEAD "T" ANCHOR CHART JAMB MULLION (SEE CHART) MULLION PART NO. WW MULLION AW-520 WW AW-420 WW AW-530 WW AW-430 SILL WW AW-270 SHIM UNDERNEATH MULLION (BY OTHERS) "F" ANCHOR CHART PART NO. WW WW WW WW MULLION AW-520 AW-420 AW-530 AW-430 NOTE: 1. ANCHOR BOLT DESIGN DETERMINED BY STRUCTURAL ENGINEER Reliance-TC Type ll F & T Anchors - H6425

18 February Oldcastle ( ) H6444-Mull-Splice-Corners AW-129 SPLICES NOTE: UPPER FASTENERS OMITTED TO CREATE EXPANSION SPLICE. SEAL FACE OF MULLION CENTERLINE MULLION SPLICE AW-270 Reliance-TC Type ll 90 OSC Splice - H6444 REFERENCE INSTALLATION MANUAL FOR ADDITIONAL SPLICE INFO.

19 February Oldcastle ( ) H6543-Mull-Splice AW-430 AW-420 NOTE: UPPER FASTENERS OMITTED TO CREATE EXPANSION SPLICE. CW-542 SPLICE CW-190 SPLICE SEAL FACE OF MULLION CENTERLINE MULLION SPLICE Reliance-TC - Type ll Intermediate Mullion Splice - H6543 REFERENCE INSTALLATION MANUAL FOR ADDITIONAL SPLICE INFO.

Reliance-TC-Type ll Thermal Composite Type ll - Horizontals and Verticals w/ Aluminum Pressure Plate - 2-1/2 x 7-1/4

Reliance-TC-Type ll Thermal Composite Type ll - Horizontals and Verticals w/ Aluminum Pressure Plate - 2-1/2 x 7-1/4 Reliance-TC-Type ll Thermal Composite Type ll - Horizontals and Verticals w/ Aluminum Pressure Plate - 2-1/2 x 7-1/4 Table of Contents (Drawing numbers ie H6404 used as CAD detail reference only ) Elev-RcwTC-Type

More information

Reliance-TC-Type l Standard Horizontals-Aluminum Pressure Plates Integral TC Verticals w/o Face Cap - 2-1/2 x 6

Reliance-TC-Type l Standard Horizontals-Aluminum Pressure Plates Integral TC Verticals w/o Face Cap - 2-1/2 x 6 Reliance-TC-Type l Standard Horizontals-Aluminum Pressure Plates Integral TC Verticals w/o Face Cap - 2-1/2 x 6 Table of Contents (Drawing numbers ie H3505 used as CAD detail reference only ) Elev-RcwTC-Type

More information

Reliance-TC-Type l Standard Horizontals-Aluminum Pressure Plates Integral TC Verticals w/o Face Cap - 2-1/2 x7-1/4

Reliance-TC-Type l Standard Horizontals-Aluminum Pressure Plates Integral TC Verticals w/o Face Cap - 2-1/2 x7-1/4 Reliance-TC-Type l Standard Horizontals-Aluminum Pressure Plates Integral TC Verticals w/o Face Cap - 2-1/2 x7-1/4 Table of Contents (Drawing numbers ie H3405 used as CAD detail reference only ) Elev-RcwTC-Type

More information

803 Airport Rd Terrell, TX (972) RELIANCE-TCIG -THERMAL COMPOSITE CURTAIN WALL - 2 1/2 x 6 -

803 Airport Rd Terrell, TX (972) RELIANCE-TCIG -THERMAL COMPOSITE CURTAIN WALL - 2 1/2 x 6 - 803 Airport Rd Terrell, TX 75160 (972) 551-6100 RELIANCE-TCIG -THERMAL COMPOSITE CURTAIN WALL - 2 1/2 x 6 - Table of Contents (Drawing numbers ie V8501 used as CAD detail reference only ) Elevation_Rcw-TCIG_600

More information

803 Airport Rd Terrell, TX (972) RELIANCE-TCIG -THERMAL COMPOSITE CURTAIN WALL - 2 1/2 x 7 1/4 -

803 Airport Rd Terrell, TX (972) RELIANCE-TCIG -THERMAL COMPOSITE CURTAIN WALL - 2 1/2 x 7 1/4 - 803 Airport Rd Terrell, TX 75160 (972) 551-6100 RELIANCE-TCIG -THERMAL COMPOSITE CURTAIN WALL - 2 1/2 x 7 1/4 - Table of Contents (Drawing numbers ie V8401 used as CAD detail reference only ) Elevation_Rcw-TCIG_725

More information

Reliance-HTC Curtain Wall 2 Glazing x 2-1/2 x 7-1/2

Reliance-HTC Curtain Wall 2 Glazing x 2-1/2 x 7-1/2 Reliance-HTC Curtain Wall 2 Glazing x 2-1/2 x 7-1/2 Table of Contents (Drawing numbers ie H9802 used as CAD detail reference only ) Elev_Rcw-HTC-175glz-10in-Capt Elev_Rcw-HTC-175glz-10in-SSG H9801-Head-175glz

More information

Reliance-HTC Curtain Wall 1-3/4 Glazing x 2-1/2 x 7-1/4

Reliance-HTC Curtain Wall 1-3/4 Glazing x 2-1/2 x 7-1/4 Reliance-HTC Curtain Wall 1-3/4 Glazing x 2-1/2 x 7-1/4 Table of Contents (Drawing numbers ie H9702 used as CAD detail reference only ) Elev_Rcw-HTC-175glz-10in-Capt Elev_Rcw-HTC-175glz-10in-SSG H9701-Head-175glz

More information

Reliance-HTC Curtain Wall 1-3/4 Glazing x 2-1/2 x 10

Reliance-HTC Curtain Wall 1-3/4 Glazing x 2-1/2 x 10 Reliance-HTC Curtain Wall 1-3/4 Glazing x 2-1/2 x 10 Table of Contents (Drawing numbers ie H9732 used as CAD detail reference only ) Elev_Rcw-HTC-175glz-10in-Capt Elev_Rcw-HTC-175glz-10in-SSG H9731-Head-175glz

More information

Reliance-HTC Curtain Wall 2 Glazing x 2-1/2 x 10-1/4

Reliance-HTC Curtain Wall 2 Glazing x 2-1/2 x 10-1/4 Reliance-HTC Curtain Wall 2 Glazing x 2-1/2 x 10-1/4 Table of Contents (Drawing numbers ie H9832 used as CAD detail reference only ) Elev_Rcw-HTC-175glz-10in-Capt Elev_Rcw-HTC-175glz-10in-SSG H9831-Head-175glz

More information

BuildingEnvelope Oldcastle ( ) -

BuildingEnvelope Oldcastle ( ) - BuildingEnvelope 1-866-Oldcastle (653-2278) - www.obe.com FG-1000 STOREFRONT 1-3/ X / 1/ GLAZING / CENTER SET Elev-Fg1000-CenterSet H4701-Horiz-OutsideGlz H4702-Head-OutsideGlz H4703-Sill-OutsideGlz-10PSF

More information

BuildingEnvelope Oldcastle ( ) -

BuildingEnvelope Oldcastle ( ) - BuildingEnvelope 1-866-Oldcastle (653-2278) - www.obe.com FG-3000 STOREFRONT 2" X 4-1/2" / Elev-Fg3000-CenterSet H0601-Horiz-OutsideGlz H0602-Head-OutsideGlz H0603-Sill-OutsideGlz-10psf H0604-Sill-OutsideGlz

More information

ICR-225 WINDOW WALL SYSTEM B - 2-1/4 x 6. Table of Contents (Drawing numbers ie V8761 used as CAD detail reference only )

ICR-225 WINDOW WALL SYSTEM B - 2-1/4 x 6. Table of Contents (Drawing numbers ie V8761 used as CAD detail reference only ) ICR-225 WINDOW WALL SYSTEM B - 2-1/4 x 6 Table of Contents (Drawing numbers ie V8761 used as CAD detail reference only ) Elev-ICR-225-System B-6.00in H8707-Intermediate Horizontal H8751-Head Horizontal

More information

FG-1000 Storefront - Center Set 1-3/4 x 4

FG-1000 Storefront - Center Set 1-3/4 x 4 FG-1000 Storefront - Center Set 1-3/4 x 4 Table of Contents (Drawing numbers ie H4701 used as CAD detail reference only ) Elev-Fg1000-Storefront H4701-Horizontal-Outside Glaze H4702-Head-Horizontal H4706-Stacked-Horizontal-Out

More information

Use steel clip angle as a drill template and drill through mullion. Install bolts with bolt heads on the masonry side of the jamb mullion.

Use steel clip angle as a drill template and drill through mullion. Install bolts with bolt heads on the masonry side of the jamb mullion. Additional 200xpt and 250xpt installation instructions are shown on page 11. STICK METHOD ERECTION (refer to figures 1 and 2) Step 1 Establish all control lines and grades. Step 2 Attach steel intermediate

More information

Series SSG and Captured corner mullion. Installation Instructions

Series SSG and Captured corner mullion. Installation Instructions Series 5500 SSG and Captured corner mullion Installation Instructions Part NO. Y556 February 2013 SECTION TABLE OF CONTENTS S-5500 SSG and Captured Corner Mullion Installation Instructions PAGE I. General

More information

70 WALL FABRICATION - SEALANT - ERECTION

70 WALL FABRICATION - SEALANT - ERECTION 70 WALL FABRICATION - SEALANT - ERECTION GENERAL INSTALLATION NOTES SECTION 1 General Information................................... 3 Assessing the Opening................................. 4 SECTION

More information

YCU 750 TU Unitized Curtain Wall System

YCU 750 TU Unitized Curtain Wall System INSTALLATION INSTRUCTIONS 1 2 Installation Manual 2010 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................ Page

More information

RELIANCE-SS CURTAIN WALL INSTALLATION AND GLAZING MANUAL

RELIANCE-SS CURTAIN WALL INSTALLATION AND GLAZING MANUAL RELIANCE-SS CURTAIN WALL INSTALLATION AND GLAZING MANUAL Note: The installation details found in this package are generic and are for representation only with the intent of giving the installation team

More information

apexfacades.com apexfacades.com Printed on 12/12/17

apexfacades.com apexfacades.com Printed on 12/12/17 M E R I D I A N apexfacades.com 1.866.970.5948 apexfacades.com 4 5 0 T 1.0 H E R M A L L Y B R O K Meridian E N Pg- 1 S T O R E F R O N T THIS PAGE INTENTIONALY LEFT BLANK apexfacades.com 1.0 Meridian

More information

YCU 750 TU Unitized Curtain Wall System

YCU 750 TU Unitized Curtain Wall System ASSEMBLY INSTRUCTIONS Assembly Manual 2009 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................ Page ii PARTS

More information

Introduction...COMB-2 Design Considerations and Examples...COMB-3

Introduction...COMB-2 Design Considerations and Examples...COMB-3 SECTION DIRECTORY General Information Introduction...COMB-2 Design Considerations and Examples...COMB-3 Combination Assembly Recommendations and Limitations Composite Configurations...COMB-4 Typical Sealant

More information

4 Season Enclosure. 3 Season Enclosure. Screen Enclosure. Suggested Installation Instructions. Patio Cover / Car Shield

4 Season Enclosure. 3 Season Enclosure. Screen Enclosure. Suggested Installation Instructions. Patio Cover / Car Shield 4 Season Enclosure 3 Season Enclosure Screen Enclosure Patio Cover / Car Shield Suggested Installation Instructions Table of Contents 4 Season Enclosure... 1 Anchoring Details... 2 Installation - Under

More information

YCW 750 SplineTech Shop Glazed Curtain Wall System Installation Manual

YCW 750 SplineTech Shop Glazed Curtain Wall System Installation Manual YCW 750 SplineTech Shop Glazed Curtain Wall System Installation Manual 2009 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................

More information

YCW 750 SSG Structural Silicone Glazed Curtain Wall System 4 Side SSG Shop Glazed (2 Side Toggle Glazing Method) Installation Manual

YCW 750 SSG Structural Silicone Glazed Curtain Wall System 4 Side SSG Shop Glazed (2 Side Toggle Glazing Method) Installation Manual YCW 750 SSG Structural Silicone Glazed Curtain Wall System 4 Side SSG Shop Glazed (2 Side Toggle Glazing Method) Installation Manual 2014 YKK AP America Inc. is a subsidiary of YKK Corporation of America.

More information

hurricane resistant window wall systems

hurricane resistant window wall systems hurricane resistant window wall systems Table of Contents (SG) (SG) Table of Contents Finish Information page 2 RW-5000 StormMax 2-1/2" x 5" Wet Glazed Monolithic Laminated Glazing Extrusions page 3 RW-5000

More information

FIXED WINDOW SECTION DETAILS

FIXED WINDOW SECTION DETAILS FIXED WINDOW SCALE " = '-0" FIXED WINDOW SECTION PROFILE @ HEAD SCALE '-0" = '-0" FIXED WINDOW SECTION PROFILE @ JAMB SCALE '-0" = '-0" FIXED WINDOW SECTION PROFILE @ SILL SCALE '-0" = '-0" NAO84 STEEL

More information

ASTM E 1886 and ASTM E 1996 TEST REPORT. Report No.: A Rendered to: CORAL ARCHITECTURAL PRODUCTS Tuscaloosa, Alabama

ASTM E 1886 and ASTM E 1996 TEST REPORT. Report No.: A Rendered to: CORAL ARCHITECTURAL PRODUCTS Tuscaloosa, Alabama Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: A2651.02 401 44 Rendered to: CORAL ARCHITECTURAL PRODUCTS Tuscaloosa, Alabama PRODUCT TYPE: 90 Corner Curtain Wall SERIES/MODEL:

More information

4 1 2" System Depth Dry Glazing Compatible with a variety of Windspec doors and operable windows Available in anodized and painted finishes

4 1 2 System Depth Dry Glazing Compatible with a variety of Windspec doors and operable windows Available in anodized and painted finishes THE 655 SERIES ENHANCES THE POPULAR FLUSH GLAZING SYSTEM BY INCREASING ITS THERMAL PERFORMANCE. BY UTILIZING AN ADVANCED GLASS-REINFORCED NYLON THERMAL BREAK, THE 655 SERIES RAISES OUR TRADITIONAL FLUSH

More information

KAWNEER 1786 RIM EXIT DEVICE

KAWNEER 1786 RIM EXIT DEVICE FEBRUARY, 2015 1 DOOR STILE Device C L 40" 41-9/32" Cylinder C L Bottom of door RIM EXIT DEVICE LOCATION DOGGING KEY EXIT DEVICE FILLER PLATE CYLINDER & CYLINDER RING HOUSING COVER CYLINDER INSTALLATION

More information

Wv410 window. Installation Instructions

Wv410 window. Installation Instructions Wv410 window Installation Instructions Part NO. Y007 February 2014 TABLE OF CONTENTS SECTION PAGE I. Product Description and Limitations..........3 II. General Statements and Definitions........3 III.

More information

250 SERIES 1" STRUCTURAL TUBE MULLION ASSEMBLY INSTRUCTIONS

250 SERIES 1 STRUCTURAL TUBE MULLION ASSEMBLY INSTRUCTIONS 2014 Pella Corporation Part Number: V985711 250 SERIES 1" STRUCTURAL TUBE MULLION ASSEMBLY INSTRUCTIONS Be sure to thoroughly read and understand all the steps before beginning the mullion assembly process.

More information

* * 4023 KR. Step 1 Prepare the Keyed Removable Unit. Not for use on electric or fire rated removable mullions

* * 4023 KR. Step 1 Prepare the Keyed Removable Unit. Not for use on electric or fire rated removable mullions condition. *64009-00* 64009-00 Keyed Removable Mullions 403 KR Installation Instructions Not for use on electric or fire rated removable mullions This kit includes the following parts: (Not to scale) 5/6

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS KR54, KR1654, & KR4954 Keyed Removable Mullion NOT FOR USE ON ELECTRIC OR FIRE RATED MULLIONS. This kit includes the following parts: (Not to scale) WARNING Remove key, reinstall,

More information

AMS MU800 Mullion Drained Curtain Walling

AMS MU800 Mullion Drained Curtain Walling SPECIFICATION AMS MU800 Mullion Drained Curtain Walling The AMS MU800 mullion drained curtain walling system offers unique architectural design features combined with market leading weather performance.

More information

MetroView TM FG 501T Window Wall

MetroView TM FG 501T Window Wall JULY, 0 FEATURES Features is an inside glazed system -/" (.) sight line with standard " () system depth IsoLock TM lanced pour and debridged /" (.) thermal break Screw spline fabrication and joinery Standard

More information

JOINING MULLION (DIRECT MULL) ASSEMBLY INSTRUCTIONS FOR 3-WAY OR 4-WAY JOINTS FOR IMPERVIA AWNING, CASEMENT AND LARGE AWNING

JOINING MULLION (DIRECT MULL) ASSEMBLY INSTRUCTIONS FOR 3-WAY OR 4-WAY JOINTS FOR IMPERVIA AWNING, CASEMENT AND LARGE AWNING 2014 Pella Corporation JOINING MULLION (DIRECT MULL) ASSEMBLY INSTRUCTIONS FOR 3-WAY OR 4-WAY JOINTS FOR IMPERVIA AWNING, CASEMENT AND LARGE AWNING For Additional Mullion Assembly Information; Visit www.installpella.com/mullions,

More information

Vinyl French Door Assembly Instructions

Vinyl French Door Assembly Instructions Vinyl French Door Assembly Instructions SERIES FD 5455/5555 Para instrucciones en español, visite: http://bit.ly/pgtassemblyinstructions FD 5455 / 5555 Parts List ITEM 1 FD 5455/5555 PARTS LIST FRAME HEAD

More information

1Perma-Shield Gliding Doors (PSI 1968 to 1978)

1Perma-Shield Gliding Doors (PSI 1968 to 1978) 1Perma-Shield Gliding Doors (PSI 1968 to 1978) Parts Catalog Main Menu Section TOC Search What s in This Section 2-Panel, 3-Panel, and Sidelights...................................... Page 3 Parts Illustration...........................................................

More information

1Perma-Shield Gliding Doors (PSI 1968 to 1978)

1Perma-Shield Gliding Doors (PSI 1968 to 1978) 1Perma-Shield Gliding Doors (PSI 1968 to 1978) Parts Catalog Main Menu Section TOC Search What s in This Section 2-Panel, 3-Panel, and Sidelights...................................... Page 3 Parts Illustration...........................................................

More information

SECTION B2 SERIES CF451T STOREFRONT SYSTEM 2" X 4 1 /2" for 1" GLAZING

SECTION B2 SERIES CF451T STOREFRONT SYSTEM 2 X 4 1 /2 for 1 GLAZING SECTION B2 SERIES CF5T STOREFRONT SYSTEM X / for " GLAZING www.cardcompro.com SECTION B2 SERIES CF5T (Thermal) STOREFRONT SYSTEM SERIES CF5 (Non-Thermal) STOREFRONT SYSTEM X ½" FOR " GLAZING TABLE OF

More information

Structural Mullion System

Structural Mullion System Structural Mullion System Installation Instructions DNA Part Number 10300085 This system is designed to allow for larger window combinations. It is not intended to replace structural members in a building.

More information

Kestrel Aluminium Systems Limited. Product Manual Section 6 Low Rise Curtain Walling. Manual Version

Kestrel Aluminium Systems Limited. Product Manual Section 6 Low Rise Curtain Walling. Manual Version Limited Product Manual Section 6 Manual Version 23.0.1 Section 6.01 Product specification 6.01.01 sheet 1 Product Specification 6.01.02 sheet 1 Product Specification 6.01.03 sheet 1 Product Specification

More information

COMP 6 Frame Parts. Comp (U1 REVISED) 6.1

COMP 6 Frame Parts. Comp (U1 REVISED) 6.1 COMP 6 Jamb Profiles...6.3 Head Jambs - Standard...6.4 Head Jambs - Arch and Radius...6.5 Head Jambs - Continous with 1 Sidelite and Double Doors...6.6 Head Jambs - Triple and Single with 2 Sidelites...6.7

More information

Accentra Pellet Insert Installation into Zero Clearance Wood Fireplaces

Accentra Pellet Insert Installation into Zero Clearance Wood Fireplaces Accentra Pellet Insert Installation into Zero Clearance Wood Fireplaces 1-00-674205 Contents: 1. 36 of 24 gauge wire 0-88-886013 2. HWH TEK 10 x 3/4 3-30-511007517 3. Flue insulation 3-44-674205 4. Installation

More information

TWO PERSON WALL MOUNT

TWO PERSON WALL MOUNT ONE TIER TWO TIER THREE TIER FOUR TIER FIVE TIER SIX TIER 16 PERSON TWO PERSON WALL MOUNT Specifications Body: Entire unit (bottom, sides, top, back, and shelves) constructed of mild cold rolled 24 ga.

More information

SS SERIES STAINLESS STEEL SLIDE GATE

SS SERIES STAINLESS STEEL SLIDE GATE SS-250-1 SERIES STAINLESS STEEL SLIDE GATE THE BEST OF TECHNOLOGY FOR STRENGTH AND LONGEVITY IN CORROSIVE ATMOSPHERES 304 OR 316 STAINLESS STEEL WITH UHMW PLASTIC SLIDING AND SEATING SURFACES MEETS LEAKAGE

More information

ZICO 3090PM4. Horizontal Hard Suction Mount Kits HHS-TM-1, HHS-TM-2, HHS-TM-1-ST, HHS-TM-2-ST, HHS-TMV-2, HHS-TMV-2-ST Parts and Instruction Manual

ZICO 3090PM4. Horizontal Hard Suction Mount Kits HHS-TM-1, HHS-TM-2, HHS-TM-1-ST, HHS-TM-2-ST, HHS-TMV-2, HHS-TMV-2-ST Parts and Instruction Manual Horizontal Hard Suction Mount Kits Models HHS-TM-1, HHS-TM-2, HHS-TM-1-ST, HHS-TM-2-ST, HHS-TMV-2, HHS-TMV-2-ST Parts and Instruction Manual ZICO 3090PM4 Rev. 9-27-18 I. SYSTEMS AVAILABLE A. HHS-TM-1:

More information

SAFETY GUIDELINES FOR DIY TENTS

SAFETY GUIDELINES FOR DIY TENTS SAFETY GUIDELINES FOR DIY TENTS Please read carefully and fully before starting assembly of the tent 1. The installer is solely responsible for evaluating the site and proper securing method determined.

More information

Series 2050 Garden Window Frequently Asked Questions

Series 2050 Garden Window Frequently Asked Questions 1. What is the difference between new construction and retrofit? The difference is in the overall jamb depth and required components: For new construction, the flash flange on the head of the unit is left

More information

AJW. Athletic Series Lockers. Architectural Products ONE TIER TWO TIER THREE TIER FOUR TIER FIVE TIER SIX TIER

AJW. Athletic Series Lockers. Architectural Products ONE TIER TWO TIER THREE TIER FOUR TIER FIVE TIER SIX TIER ONE TIER TWO TIER THREE TIER FOUR TIER FIVE TIER SIX TIER Specifications Body: Backs constructed of mild cold rolled 18 ga. commercial grade steel. Bottom, sides, top, and shelves constructed of 16 ga.

More information

Oil By-Pass Filter Installation. By: Woodnthings8

Oil By-Pass Filter Installation. By: Woodnthings8 Oil By-Pass Filter Installation By: Woodnthings8 Keeping clean oil in a 7.3L Powerstroke is probably the most important thing you can do to increase longevity and decrease wear. The oil filter installed

More information

DOOR - Single Leaf, Premium Duty, Quick-Acting Model 1430 Features 1

DOOR - Single Leaf, Premium Duty, Quick-Acting Model 1430 Features 1 DOOR - Single Leaf, Premium Duty, Quick-Acting Model Features 1 FREEMAN MARINE Quick-Acting doors feature patented chain-drive, single actuation dogging. This design feature allows for quick-acting doors

More information

SECTION B1 SERIES 450 STOREFRONT SYSTEM 1 3 /4" X 4 1 /2" for 1 /4" GLAZING

SECTION B1 SERIES 450 STOREFRONT SYSTEM 1 3 /4 X 4 1 /2 for 1 /4 GLAZING SECTION B SERIES 450 STOREFRONT SYSTEM 3 /4" X 4 /2" for /4" GLAZING www.cardcompro.com TIS PAGE INTENTIONALLY LEFT BLANK SECTION B SERIES CF450 STOREFRONT SYSTEM ¾" X 4½" FOR ¼" GLAZING TABLE OF CONTENTS

More information

Series 407 FaceLINE Framing

Series 407 FaceLINE Framing Single Glazed 102mm Monash University Education Precinct. Architect: Toon Architects Group. Windows by DLG Aluminium & Glazing. DATE: MAY 2013 REPLACES: MARCH 2008 KEY FEATURES/PERFORMANCE CHARACTERISTICS

More information

Arcade Windows. Architectural Design Manual. July 2014

Arcade Windows. Architectural Design Manual. July 2014 s Architectural Design Manual July 2014 Table of Contents Layouts... 1 Cross Sections Details... 14 Mullion Cross Section Details... 22 Grill Patterns... 39 Grill Option Details... 46 Bracket Details...

More information

Installation Instructions/Operation and Maintenance Manual

Installation Instructions/Operation and Maintenance Manual Installation Instructions/Operation and Maintenance Manual Models: FP-530 FP-530 FM Contact Information Table of Contents: Safety Precautions... 2 Product Information... 2 A-Frame... 4 Corner... 9 Single

More information

Counter Display Items

Counter Display Items 1/4" Dr. x 3/8" Dr. Dual Drive Stubby Ratchet Part No. 640923 Dual drive 2 in 1 design Compact size is great for fasteners in tight areas Black composite coating with TPR injection handle for comfort 272504

More information

Range Name Description Use With Finish Pack Size. 90 Flat Angled fixing bracket. Steel. 90 Angled fixing bracket. Steel. Steel

Range Name Description Use With Finish Pack Size. 90 Flat Angled fixing bracket. Steel. 90 Angled fixing bracket. Steel. Steel Pack Size Fixing Brackets CB20 90 Flat Angled fixing bracket Use with, and glazed. CB40 3 Way "T" Plate Use with, and glazed. CB60 90 Angled fixing bracket Use with, and glazed. CB80 Flat Joining Strip

More information

* * KR54-F, KR9854 & KR9954 Installation Instructions. Read All Warnings Before Starting Installation! Index:

* * KR54-F, KR9854 & KR9954 Installation Instructions. Read All Warnings Before Starting Installation! Index: *941061-00* 941061-00 Keyed Removable Mullion KR54-F, KR9854 & KR9954 Installation Instructions CLASSIFIED CLASSIFIED C Read All Warnings Before Starting Installation! Index: General Information ----------------

More information

SECTIONAL OVERHEAD DOORS

SECTIONAL OVERHEAD DOORS SECTIONAL OVERHEAD DOORS Why choose Insulated Sectional Overhead Doors? 25mm approx. 40mm This leaflet is offered as a guide for the Trade when presenting the arguments in favour of specification and selection

More information

CONTENTS. 1. Types of confections. 2. Profile overwiev. 3. Setting the metallic reinforcements. 4. Millings, drillings. 5. Welding. 6.

CONTENTS. 1. Types of confections. 2. Profile overwiev. 3. Setting the metallic reinforcements. 4. Millings, drillings. 5. Welding. 6. CONTENTS 1. Types of confections 2. Profile overwiev 3. Setting the metallic reinforcements 4. Millings, drillings 5. Welding 6. Assembly 7. Glazing 8. Finalizing the confection 9. Coupling the confections

More information

Product Overview... 1 Component Checklist...2

Product Overview... 1 Component Checklist...2 INSTALLATION MANUAL FREEDOM AWNING RV MOTORIZED PATIO BOX AWNING TABLE OF CONTENTS Product Overview... 1 Component Checklist...2 Installation... 3 Installation Using an Awning Rail...3 Installation Using

More information

INSTALLATION INSTRUCTIONS FOR BALCO, INC. FLOOR MATS FM2R-(A, C, D) W/O FRAME 4V

INSTALLATION INSTRUCTIONS FOR BALCO, INC. FLOOR MATS FM2R-(A, C, D) W/O FRAME 4V 2626 South Sheridan PO Box 17249 Wichita, Kansas 67217 Phone: (316) 945-9328 Fax: (316) 945-0789 INSTALLATION INSTRUCTIONS FOR BALCO, INC. FLOOR MATS FM2R-(A, C, D) W/O FRAME 4V 2012, Balco, Inc. INSTALLATION

More information

. crealco C A S E M E N T Index Legal Disclaimer 5 Profile Identification 6-8 Hardware Identification 9 New Crimper 10 Butterfly Gasket and Wed

. crealco C A S E M E N T Index Legal Disclaimer 5 Profile Identification 6-8 Hardware Identification 9 New Crimper 10 Butterfly Gasket and Wed . crealco C A S E M E N T 3 0. 5 CASEMENT 30.5 PRODUCT MANUAL 2013 Wispeco (Pty) Ltd, All Rights Reserved Revision: October 2013 . crealco C A S E M E N T 3 0. 5 Index Legal Disclaimer 5 Profile Identification

More information

cslouvers /CON BuyLine 1006

cslouvers /CON BuyLine 1006 cslouvers 08 9100/CON BuyLine 1006 Selecting the wrong Louver can be very costly. Consider these four factors before specifying 1 Rain Defense Letting air into a building while keeping water out has always

More information

Installation Accessories and Applications

Installation Accessories and Applications SECTION DIRECTORY Installation Accessories and Applications Introduction...W-IA-2 Window Attachment Options...W-IA-4 Subsill...W-IA-6 Exterior Mullions...W-IA-8 Mullion Cover Application...W-IA-10 Mullion

More information

CUSTOMER TECHNICAL MEMO # 286

CUSTOMER TECHNICAL MEMO # 286 CUSTOMER TECHNICAL MEMO # 286 Subject ecowall 225 Manufacturing drawings for Structurally Glazed Mullions Date: 16th February 2017 Author: Product Development Team We are very pleased to advise we have

More information

Sunshade System / Air Foil

Sunshade System / Air Foil Sunshade System / Air Foil 2-1/8 Air Foil x 16 56-63-200 4 Air Foil x 24 56-63-400 Wall:.080 ENGINEERING AVAILABLE UPON REQUEST Florida items are available to all branches via shuttle. 6 Air Foil x 24

More information

Continued Operational Safety Risk Assessment of Textron Aviation s Commercial Fleet. July 5, 2018

Continued Operational Safety Risk Assessment of Textron Aviation s Commercial Fleet. July 5, 2018 Continued Operational Safety Risk Assessment of Textron Aviation s Commercial Fleet July 5, 2018 Textron Aviation s Commercial Fleet Several Textron Aviation piston and turboprop models are used in scheduled

More information

AAMA THERMAL PERFORMANCE REPORT. Rendered to: UNITED STATES ALUMINUM. SERIES/MODEL: 3250 Curtain Wall (Site-Built) TYPE: Glazed Wall System

AAMA THERMAL PERFORMANCE REPORT. Rendered to: UNITED STATES ALUMINUM. SERIES/MODEL: 3250 Curtain Wall (Site-Built) TYPE: Glazed Wall System Architectural Testing AAMA 507-07 THERMAL PERFORMANCE REPORT Rendered to: UNITED STATES ALUMINUM SERIES/MODEL: 3250 Curtain Wall (Site-Built) TYPE: Glazed Wall System Report No: Report Date: B6898.01-116-45

More information

High energy efficiency

High energy efficiency High energy efficiency NX-000 Series Thermal Windows Thermal Performance Merges with Adaptable Design to Offer More Choices Maine East High School, Park Ridge, Illinois Architect: ARCON Associates Inc.,

More information

Elegance 52 & Elegance 72 Curtain Walling

Elegance 52 & Elegance 72 Curtain Walling Uniclass L3811+L411+L413:P43 CI/SfB (21.4)+(31.4)+(31.5) EPIC C421+D11+D13:X46 Xh4 March 2010 Elegance 52 & Elegance 72 Curtain Walling Technical Data Sheet Sapa Building System 2 Elegance 52 & 72 Contents

More information

CUSTOMER TECHNICAL MEMO # 285

CUSTOMER TECHNICAL MEMO # 285 CUSTOMER TECHNICAL MEMO # 285 Subject HunterEvo SG 101.6mm,150mm & Date: 16th February 2017 DG 150mm Manufacturing drawings for Structurally Glazed Mullions Author: Product Development Team We are very

More information

Universal 10 x 27 Canopy

Universal 10 x 27 Canopy Universal 10 x 27 Canopy C81027PC Size: 10 8 x 27 x 6 8 (side) x 9 9 (center) With 10 Legs, Frame, and Cover Powell & Powell Supply Company Distributed by: 1730 Five Points Lane Fuquay-Varina, North Carolina

More information

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2204A

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2204A IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2204A Warnings Truck Bed and Camper Protection Torklift does not recommend installing your camper on top of a plastic bed liner (or other compressible

More information

Curtain wall system ALBIO R50

Curtain wall system ALBIO R50 Curtain wall system Technical Catalogue Curtain wall system Table of content Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Chapter 6 Chapter 7 General informations Overview of profiles & accessories

More information

TITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V

TITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V TITAN pt. no.: 02 0000 0128 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended

More information

Price increase disclaimer prices subject to change without notice, see local representative or manufacturer for current prices. Greenfield Products

Price increase disclaimer prices subject to change without notice, see local representative or manufacturer for current prices. Greenfield Products Greenfield Products 801 Cedar Cross Rd Dubuque, Iowa, 52003 563 583 1978 fax 563 582 6113 2/27/2012 Page Hi, I m Tim Greenfield, owner of Greenfield Products. For 50 years my family has been in the glass

More information

PN 3000 Series Fail Closed Pneumatic Actuators

PN 3000 Series Fail Closed Pneumatic Actuators PN 3000 Series Fail Closed Pneumatic Description A of compact linear actuators having 5 diaphragm sizes for matching the requirements of 1/2" to 4" Spira-Trol valves at various differential pressures.

More information

ADDED PROTECTION FOR SLIDE-OUT ROOMS. Installation. Introduction... 2 Product Overview...2 Component Checklist...3

ADDED PROTECTION FOR SLIDE-OUT ROOMS. Installation. Introduction... 2 Product Overview...2 Component Checklist...3 CAREFREE SIDEOUT KOVER II RV Installation ADDED PROTECTION FOR SLIDE-OUT ROOMS TABLE OF CONTENTS SOKII Shown with Full Case Option Introduction... 2 Product Overview...2 Component Checklist...3 Installation...

More information

P3000 UNIVERSAL Clamp-On

P3000 UNIVERSAL Clamp-On IHI INSTRUCTION MANUAL Required Tools P3000 UNIVERSAL Clamp-On Wrench Allen Key P3001 65 ENDCAPS P3011 65 BLACK P300 7 ENDCAPS P301 7 WHITE P3003 ENDCAPS P3013 SILVER PART# DESCRIPTION ENDCAPS SIDE SUPPORTS

More information

Instruction Manual Remote Swabbing and Microbiological Sampling and Teflon template tools Version , Rev.0

Instruction Manual Remote Swabbing and Microbiological Sampling and Teflon template tools Version , Rev.0 ASSEMBLY AND OPERATIONAL INSTRUCTIONS The remote swabbing and microbiological sampling tool and the Teflon template tool are shipped partially assembled. Complete assembly instructions are provided below:

More information

ITEM NAME SPEC. PICTURE. BS=7.5mm, L=400mm,silver. BS=7.5mm, L=600mm,silver. BS=7.5mm, L=800mm,silver. BS=7.5mm, L=1000mm,silver

ITEM NAME SPEC. PICTURE. BS=7.5mm, L=400mm,silver. BS=7.5mm, L=600mm,silver. BS=7.5mm, L=800mm,silver. BS=7.5mm, L=1000mm,silver SLIDING WINDOW BS=7.5mm, L=400mm,silver BS=7.5mm, L=600mm,silver BS=7.5mm, L=800mm,silver BS=7.5mm, L=1000mm,silver Sliding window gear in Carbon Material. BS=7.5mm, L=1200mm,silver BS=7.5mm, L=1400mm,silver

More information

Installation Instructions for the Rolltec Physique XL Awning

Installation Instructions for the Rolltec Physique XL Awning Installation Instructions for the Rolltec Physique XL Awning Questions? Call Rolltec at 1-800-667-0474 General Tool Requirements Table of Contents Available installation brackets Side dimensions of various

More information

Visual Presentation Drawings

Visual Presentation Drawings Visual Presentation Drawings GLASS 8 7 3 8 7 3 8 0 48 4 47 4 GLASS WITH CUTOUT 8 CUTOUT 0 0 8 4 47 4 48 4 8 48 4 0 8 4 43 3 4 38 GLASS 8 43 3 4 38 5 5 54 5 6 54 7 8 8 8 54 7 8 54 5 6 304 4 NORTH Break

More information

Spiral Duct. Contents. Introduction 1. Duct & Fitting Range 2. Duct Sizes 3. Fittings 5. Round Duct Connector 7. Installation 8

Spiral Duct. Contents. Introduction 1. Duct & Fitting Range 2. Duct Sizes 3. Fittings 5. Round Duct Connector 7. Installation 8 Contents Introduction 1 Duct & Fitting Range 2 Duct Sizes 3 Fittings 5 Round Duct Connector 7 Installation 8 Celmec International Pty Ltd ACN 005 850 546 Melbourne Tel: +61 3 8552 8200 Fax: +61 3 9555

More information

SECTION SPECIFICATIONS PART 1 GENERAL

SECTION SPECIFICATIONS PART 1 GENERAL PART 1 GENERAL 1.1 SECTION INCLUDES A. Shower doors. B. Sliding enclosures. C. Shower doors and panels. 1.2 RELATED SECTIONS A. Section 06100 - Rough Carpentry; blocking. B. Section 15400 - Plumbing Fixtures

More information

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2213 / C2220

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2213 / C2220 IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2213 / C2220 Minor movement (or settling) can occur in some incidental harsh driving conditions (On or off road). A rubber bed mat is not a requirement

More information

Closet and Specialty Hardware

Closet and Specialty Hardware Closet and Specialty Hardware Door & Mirror Hardware...100 Magnetic and Bullet Catches... 100 Sliding Door Pulls........................................ 100 Mirror Clips/Glass Clips, Fittings and Latches...

More information

Item # BJ2PC With 8 Leg Frame, Cover, and Enclosure Kit with Windows Size: 10 8 Wide x 20 Long (Side Height 6 8 ) (Center Peak Height 9 9 )

Item # BJ2PC With 8 Leg Frame, Cover, and Enclosure Kit with Windows Size: 10 8 Wide x 20 Long (Side Height 6 8 ) (Center Peak Height 9 9 ) Item # BJ2PC With 8 Leg Frame, Cover, and Enclosure Kit with Windows Size: 10 8 Wide x 20 Long (Side Height 6 8 ) (Center Peak Height 9 9 ) Powell & Powell Supply Company, L.L.C. Manufactured by: 1730

More information

D. S. HULL COMPANY, INC

D. S. HULL COMPANY, INC Perko Flush Ring Pull Chrome plated zinc. Order No Mfg No O.D. List 340427 1232DP1CHR 1-5/8 $15.78 340434 1232DP2CHR 2 $18.38 Perko Flush Lifting Handle Chrome plated brass. Screw size: #8. Note: 776DP2

More information

Installation Instructions for the Rolltec Adalia X3M Extenda Awning

Installation Instructions for the Rolltec Adalia X3M Extenda Awning Installation Instructions for the Rolltec Adalia X3M Extenda Awning Questions? Call Rolltec at 1-800-667-0474 General Tool Requirements Table of Contents Available installation brackets Side dimensions

More information

PRODUCT INFORMATION MANUAL SECTION: 17 METAL LOUVRE AWNINGS METAL LOUVRE AWNINGS

PRODUCT INFORMATION MANUAL SECTION: 17 METAL LOUVRE AWNINGS METAL LOUVRE AWNINGS METAL LOUVRE AWNINGS Sizes & Limitations Metal Louvre Awnings TRINIDAD TRINIDAD SUNGUARD FIXED ADJUSTABLE Maximum Width Unlimited 5000mm Unlimited Minimum Width 500mm 500mm 500mm Maximum Drop 4000mm 2500mm

More information

Setting Higher Standards in Aluminum

Setting Higher Standards in Aluminum Setting Higher Standards in Aluminum PH Standard 1.0mm thickness Aluminum well-known brand (c) 2018 One Sky Philippines. All Rights Reserved Setting Higher Standards in Aluminum VISION After years of cultivation,

More information

Solera Classic Awning OEM INSTALLATION MANUAL

Solera Classic Awning OEM INSTALLATION MANUAL Solera Classic Awning OEM INSTALLATION MANUAL TABLE OF CONTENTS System and Safety Information 2 Preparation 3 Resources Required 3 Installation 3 Installing the Awning Rail (If Necessary) 3 Assembling

More information

COOPER FREESTANDING TUB FAUCET INSTALLATION

COOPER FREESTANDING TUB FAUCET INSTALLATION SKU(s): 940972 COOPER FREESTANDING TUB FAUCET INSTALLATION BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no

More information

Notes, Parts List & Drawings

Notes, Parts List & Drawings Biomass Chopper/Cutter Notes, Parts List & Drawings Page 1 of 16 The Easy BioChop biomass chopper/cutter was designed to cut both wet and dry biomass and to accomplish a number of goals. The objectives

More information

FLUSH MOUNT ALUMINUM DOOR DETAIL (LH SWING)

FLUSH MOUNT ALUMINUM DOOR DETAIL (LH SWING) FLUSH MOUNT ALUMINUM DETAIL (LH SWING) 'D' CLEAR DESCRIPTION 'A' 'B' 'C' 'D' 'E' FLUSH MOUNT 36" ALUMINUM 36" 4 42-1/ 33-3/8" 38-1/8" FLUSH MOUNT 45" ALUMINUM 45" 51" 51-1/ 42-3/8" 47-1/8" NOTES: TWO PIECES

More information

Installation Instructions for the Rolltec Bravo Awning

Installation Instructions for the Rolltec Bravo Awning Installation Instructions for the Rolltec Bravo Awning Questions? Call Rolltec at 1-800-667-0474 Table of Contents Available installation brackets Side dimensions of various installations Determining installation

More information

Curtain Wall Systems. A R C H I T E C T U R A L A L U M I N I U M G L A Z I N G S Y S T E M S

Curtain Wall Systems.   A R C H I T E C T U R A L A L U M I N I U M G L A Z I N G S Y S T E M S Kawneer UK Ltd Astmoor Road, Astmoor Industrial Estate Runcorn, Cheshire WA7 1QQ, United Kingdom Tel: + (0) 1928 20 Fax: + (0) 1928 21 London Office Berwick Street Soho London W1F 0PN Tel: + (0) 207 287

More information