Reliance-HTC Curtain Wall 1-3/4 Glazing x 2-1/2 x 10
|
|
- Clarence Sharp
- 5 years ago
- Views:
Transcription
1 Reliance-HTC Curtain Wall 1-3/4 Glazing x 2-1/2 x 10 Table of Contents (Drawing numbers ie H9732 used as CAD detail reference only ) Elev_Rcw-HTC-175glz-10in-Capt Elev_Rcw-HTC-175glz-10in-SSG H9731-Head-175glz H9732-Horizontal-175glz H9733-Horiz-25in-Spandrel H9734-Horiz-w-Backpan H9735-Horiz-25in-Spandrel H9736-Horiz-w-Backpan H9737-Horiz-1in-Spandrel H9738-Sill-175glz H9739-Horiz-Opwin-175glz H9744-Mull-Splice V9731-Jamb-175glz V9732-Vertical-175glz V9733-Jamb-25glz V9734-Vertical-25glz V9735-Vertical-1glz V9736-Vert-w-Backpan V9737-Vertical-Opwin-175glz V OSC-175glz V OSC-1glz V OSC-25glz V ISC-175glz V ISC-1glz V ISC-25glz V9746-SSG-Mull-175glz V9747-SSG-Mull-1glz V9748-SSG-Mull-25glz V9749-SSG-Capt-Mull-175glz V9750-SSG-Mull-Opwin-175glz
2 May OLDCASTLE ( ) Elev_Rcw-HTC-175glz-10in-Capt 1/4" JAMB V9731 V9733 F ANCHOR H ISC V9742 V9744 V9745 1" 1/4" 90 OSC V9739 V9740 V9741 1" 1/4" VERTICAL V9732 V9735 V9734 1" 1/4" T ANCHOR H9717 HEAD H9731 H9739 OPERABLE V9737 WINDOW H9733 1/4" SPANDREL BACKPAN V9736 SLAB H9715 ANCHOR H9734 BACKPAN 1" SPANDREL H9737 H9735 1/4" SPANDREL H9736 BACKPAN HORIZ H9732 H9744 SPLICE H9718 F ANCHOR H9719 MODEL: RCW-HTC -1-3/4"-10 Capt RELIANCE-HTC CURTAIN WALL X 10" 1-3/4" VISION -1" SPANDREL -1/4" SPANDREL - CAPTURED T ANCHOR SILL H9738
3 May OLDCASTLE ( ) Elev_Rcw-HTC-175glz-10in-SSG F ANCHOR H9716 SSG VERTICAL V9746 2" V9747 V9748 1" 1/4" T ANCHOR H9717 SSG VERTICAL (CAPTURED) V9749 OPERABLE V9750 WINDOW SLAB H9715 ANCHOR H9744 SPLICE H9718 F ANCHOR H9719 T ANCHOR MODEL: RCW-HTC -1-3/4"-10 SSG RELIANCE-HTC CURTAIN WALL X 10" 1-3/4" VISION -1" SPANDREL -1/4" SPANDREL - SSG VERTICALS
4 May OLDCASTLE ( ) H9731-Head-175glz PRIMARY SEAL AND BACKER ROD (BY OTHERS) AW-370/AW-375 CAPTURED/SSG MULL CAP SECONDARY SEAL AND BACKER ROD (OPTION) ANCHOR BOLT (BY OTHERS) MULLION ANCHOR WW-110 FACE AW-122 FILLER SET IN BED OF SEALANT 5/16" WEEP C.L. DLO (2) FS-115 #10 X 1" PH (SEAL HEADS) AW-801 HEAD AW ATTACH TO VERTICAL WITH FS-9 SCREWS WW-162 PRESSURE PLATE W/ GP-107 ISOLATOR AND (2) 5 16" DIA. WEEP HOLES (2) PER DLO ATTACH W/FS-325 #12-14 X 1 1 2" HWH DRIL 9" O.C. Reliance -HTC - Head Horizontal at 1 3/4" Vision H "
5 May OLDCASTLE ( ) H9732-Horizontal-175glz GP-175 SETTING BLOCK AW SETTING CHAIR 10" GP-103 TYP. AW-805 HORIZONTAL WW-110 FACE 5/16" WEEP C.L. DLO (2) FS-115 #10 X 1" PH (SEAL HEADS) WW-162 PRESSURE PLATE W/ GP-107 ISOLATOR AND (2) 5 16" DIA. WEEP HOLES (2) PER DLO ATTACH W/FS-325 #12-14 X 1 1 2" HWH DRIL 9" O.C. Reliance -HTC - Horizontal at 1 3/4" Vision H9732 AW ATTACH TO VERTICAL WITH FS-9 SCREWS
6 May OLDCASTLE ( ) H9733-Horiz-25in-Spandrel 10" GP-103 TYP. GP-175 SETTING BLOCK AW SETTING CHAIR AW ATTACH TO VERTICAL WITH FS-9 SCREWS AW-805 HORIZONTAL WW-110 FACE 5/16" WEEP C.L. DLO AW-130 GLAZING ADAPTOR; SEAL AT CORNERS (2) FS-115 #10 X 1" PH (SEAL HEADS) Reliance -HTC - Horizontal at 1 3/4" Vision Over 1/4" Spandrel H9733
7 May OLDCASTLE ( ) H9734-Horiz-w-Backpan 10" GP-175 SETTING BLOCK AW SETTING CHAIR GP-103 TYP. AW-805 HORIZONTAL WW-110 FACE 5/16" WEEP C.L. DLO AW-130 SEAL HORIZ TO VERT JOINT 22 GA GALVANIZED STEEL BACKPAN WITH INSULATION (BY OTHERS) SEAL SCREW HEADS Reliance -HTC - Horizontal at 1 3/4" Vision Over 1/4" Backpan H9734
8 May OLDCASTLE ( ) H9735-Horiz-25in-Spandrel 10" GP-103 TYP. AW-130 GLAZING ADAPTOR; SEAL AT CORNERS AW-805 HORIZONTAL WW-110 FACE 5/16" WEEP C.L. DLO (2) FS-115 #10 X 1" PH (SEAL HEADS) AW ATTACH TO VERTICAL WITH FS-9 SCREWS WW-162 PRESSURE PLATE W/ GP-107 ISOLATOR AND (2) 5 16" DIA. WEEP HOLES (2) PER DLO ATTACH W/FS-325 #12-14 X 1 1 2" HWH DRIL 9" O.C. Reliance -HTC - Horizontal at 1/4" Spandrel Over 1 3/4" Vision H9735
9 GP-103 TYP. SEAL HORIZ TO VERT JOINT 5/16" VENTILATION HOLE; 1 PER LITE 22 GA GALVANIZED STEEL BACKPAN WITH INSULATION (BY OTHERS) SEAL SCREW HEADS AW-130 WW-110 FACE 5/16" WEEP C.L. DLO 10" Reliance -HTC - Horizontal at 1/4" Spandrel Over 1 3/4" Backpan H9736 May OLDCASTLE ( ) H9736-Horiz-w-Backpan
10 May OLDCASTLE ( ) H9737-Horiz-1in-Spandrel 10" GP-103 TYP. GP-175 SETTING BLOCK AW SETTING CHAIR AW-132 GLAZING ADAPTOR; SEAL AT CORNERS AW-805 HORIZONTAL WW-110 FACE 5/16" WEEP C.L. DLO (2) FS-115 #10 X 1" PH (SEAL HEADS) AW ATTACH TO VERTICAL WITH FS-9 SCREWS WW-162 PRESSURE PLATE W/ GP-107 ISOLATOR AND (2) 5 16" DIA. WEEP HOLES (2) PER DLO ATTACH W/FS-325 #12-14 X 1 1 2" HWH DRIL 9" O.C. Reliance -HTC - Horizontal at 1" Over 1 3/4" H9737
11 May OLDCASTLE ( ) H9738-Sill-175glz 10" GP-103 TYP. (2) FS-115 #10 X 1" PH (SEAL HEADS) AW ATTACH TO VERTICAL WITH FS-9 SCREWS AW-801 SILL WW-110 FACE AW-122 FILLER SET IN SEALANT 5/16" WEEP C.L. DLO AW-370/AW-375 CAPTURED/SSG MULL CAP PRIMARY SEAL AND BACKER ROD (BY OTHERS) SECONDARY SEAL AND BACKER ROD (OPTION) Reliance -HTC - Sill Horizontal at 1 3/4" Vision H9738 MULLION ANCHOR SHIM AT BOTTOM OF VERTICALS EA SIDE ANCHOR BOLT (BY OTHERS)
12 10" GP-103 TYP. AW-805 HORIZONTAL WW-110 FACE AW-122 FILLER 5/16" WEEP C.L. DLO Operable Window go to for the most current details and vent options Reliance -HTC Horizontal Mull at Operable Window - 1 3/4" Glazing H9739 May OLDCASTLE ( ) H9739-Horiz-Opwin-175glz
13 May OLDCASTLE ( ) H9744-Mull-Splice 8" SPLICE SLEEVE RETRACT SPLICE SLEEVES & TAPE INTO UPPER MULLIONS UNTIL BOTH UPPER & LOWER MULLIONS ARE IN PLACE. RELEASE SPLICES & ALLOW TO FALL ONTO STOP SCREW. FASTEN TO LOWER MULLION WITH (2) FS-322 #12-14 X 1" HWH TEK " 2" FS-322 #12-14 X 1" HWH TEK STOP SCREW FOR SPLICE SLEEVES AW SPLICE AW SPLICE SEAL FACE OF MULLION SEAL FACE 1" OF MULLION 1" 2 5/8" 3/4" 5 1/4" SEAL FACE OF MULLION AND MULLION TONGUE. APPLY BOND BREAKER TAPE TO SPLICE SLEEVES AT JOINT. ADAPTOR AT VERTICAL SSG Mullion Splice Top View Captured Mullion Splice Reliance -HTC -Mullion Splice H9744 1/2" PRESSURE PLATE SPLICE JOINT (SEALED) Side View 1" 5 8 " 1/2" SEAL VOID BETWEEN GASKETS AND ADAPTORS AT SPLICE JOINT SEAL BETWEEN GASKETS AND PRESSURE PLATES VERTICAL GASKET
14 May OLDCASTLE ( ) V9731-Jamb-175glz AW-800 JAMB SEAL OPTION SHEAR BLOCK AT HORIZONTALS; SEE HORIZONTAL VIEW FOR INFO FS-13 #10 X 1" PPH TEK AT 18" O.C. Reliance -HTC Jamb Mullion at 1 3/4" Vision V9731 PRIMARY SEAL & BACKER ROD (OPTION) AW-122 FILLER SET IN BED OF SEALANT GP-111 SIDE BLOCK AS REQUIRED AW-370 MULL CAP MODIFIED FOR JAMB CONDITION PRIMARY SEAL & BACKER ROD (BY OTHERS) 1/2" WW-110 FACE CAP WW-162 PRESSURE PLATE W/FS-325 #12-14 X 1 1 2" HWH DRIL 9" O.C.
15 May OLDCASTLE ( ) V9732-Vertical-175glz AW-800 MULLION SHEAR BLOCK AT HORIZONTALS; SEE HORIZONTAL VIEW FOR INFO 10" Reliance -HTC Standard Mullion at 1 3/4" Vision V9732 AW-370 MULL CAP WW-110 FACE CAP WW-162 PRESSURE PLATE W/FS-325 #12-14 X 1 1 2" HWH DRIL 9" O.C.
16 May OLDCASTLE ( ) V9733-Jamb-25glz AW-800 JAMB SEAL OPTION FS-13 #10 X 1" PPH TEK AT 18" O.C. Reliance -HTC Jamb Mullion at 1/4" Spandrel V9733 SHEAR BLOCK AT HORIZONTALS; SEE HORIZONTAL VIEW FOR INFO SECONDARY SEAL & BACKER ROD (OPTION) AW-122 FILLER SET IN BED OF SEALANT PRIMARY SEAL & BACKER ROD (BY OTHERS) AW-370 MULL CAP MODIFIED FOR JAMB CONDITION AW-130 GLAZING ADAPTOR; SEAL AT CORNERS 1/2" GP-112 SIDE BLOCK AS REQUIRED
17 May OLDCASTLE ( ) V9734-Vertical-25glz AW-800 MULLION Reliance -HTC Standard Mullion at 1/4" Spandrel V9734 SHEAR BLOCK AT HORIZONTALS; SEE HORIZONTAL VIEW FOR INFO AW-370 MULL CAP AW-130 GLAZING ADAPTOR; SEAL AT CORNERS GP-112 SIDE BLOCK AS REQUIRED
18 May OLDCASTLE ( ) V9735-Vertical-1glz AW-800 MULLION Reliance -HTC Standard Mullion at 1" Spandrel V9735 GP-111 SIDE BLOCK AS REQUIRED SHEAR BLOCK AT HORIZONTALS; SEE HORIZONTAL VIEW FOR INFO AW-132 GLAZING ADAPTOR; SEAL AT CORNERS WW-110 FACE CAP WW-162 PRESSURE PLATE W/FS-325 #12-14 X 1 1 2" HWH DRIL 9" O.C.
19 May OLDCASTLE ( ) V9736-Vert-w-Backpan AW-800 MULLION 22 GA GALVANIZED STEEL BACKPAN WITH INSULATION (BY OTHERS) SEAL SCREW HEADS 10" Reliance -HTC - Standard Mullion at 1/4" Spandrel with Backpan V9736 5/16" VENTILATION HOLE; 1 PER LITE SEAL HORIZ TO VERT JOINT AW-130 AW-130 WW-162 PRESSURE PLATE W/FS-325 #12-14 X 1 1 2" HWH DRIL 9" O.C. GP-112 SIDE BLOCK AS REQUIRED
20 May OLDCASTLE ( ) V9737-Vertical-Opwin-175glz AW-800 MULLION Reliance -HTC Mullion at Operable 1 3/4" Vision V " Operable Window go to /products/architectural-windows for the most current details and vent options AW-122 FILLER SET IN SEALANT
21 May OLDCASTLE ( ) V OSC-175glz WW T-ANCHOR CW-823 FILLER AW-250 AW SHEAR BLOCK ATTACH WITH (2) FS-9 #14 X 1 1 2" HH AW SPLICE 10" AW-171 PRESSURE PLATE, ATTACH WITH (2) 9" O.C. AW-115 FACE GP-130 BOTH SIDES AW-306 FOAM ZONE PLUG AW-390 MULL CAP; ATTACH W/(3) FS-320 U-DRIVE Reliance -HTC - 90 Deg OSC at 1 3/4" Vision V /16"
22 May OLDCASTLE ( ) V OSC-1glz WW T-ANCHOR CW-823 FILLER AW-250 AW SHEAR BLOCK ATTACH WITH (2) FS-9 #14 X 1 1 2" HH AW SPLICE 10" AW-171 PRESSURE PLATE, ATTACH WITH (2) 9" O.C. AW-141 GLAZING ADAPTOR; SEAL AT CORNERS AW-115 FACE GP-130 BOTH SIDES AW-306 FOAM ZONE PLUG AW-390 MULL CAP; ATTACH W/(3) FS-320 U-DRIVE Reliance -HTC - 90 Deg OSC at 1" Spandrel V /16"
23 May OLDCASTLE ( ) V OSC-25glz WW T-ANCHOR CW-823 FILLER AW-250 AW SHEAR BLOCK ATTACH WITH (2) FS-9 #14 X 1 1 2" HH AW SPLICE 10" AW-171 PRESSURE PLATE, ATTACH WITH (2) 9" O.C. AW-115 FACE AW-140 ADAPTOR GP-130 BOTH SIDES AW-306 FOAM ZONE PLUG AW-390 MULL CAP; ATTACH W/(3) FS-320 U-DRIVE Reliance -HTC - 90 Deg OSC at 1/4" Spandrel V /16"
24 AW-800 MULLION AN-1 ALUM ANGLE (3/4"X 3/4" X 1/8").125" FORMED ALUM CLOSURE FS-13 #10 X 1" PPH TEK AT 18" O.C. SHEAR BLOCK AT HORIZONTALS; SEE HORIZONTAL VIEW FOR INFO 10" AN-1 ALUM ANGLE SHOP ATTACHED AT HEAD & SILL FOR PERIMETER SEALANT AW-370 MULL CAP MODIFIED FOR JAMB CONDITION BACKER ROD/SEALANT & SHIMS (BY OTHERS) AW-122 FILLER SET IN BED OF SEALANT WW-162 PRESSURE PLATE W/FS-325 #12-14 X 1 1 2" HWH DRIL 9" O.C. GP-111 SIDE BLOCK AS REQUIRED COSMETIC SEAL (BY OTHERS) Reliance -HTC - 90 Deg ISC at 1 3/4" Vision V9742 May OLDCASTLE ( ) V ISC-175glz
25 AW-800 MULLION AN-1 ALUM ANGLE (3/4"X 3/4" X 1/8").125" FORMED ALUM CLOSURE FS-13 #10 X 1" PPH TEK AT 18" O.C. SHEAR BLOCK AT HORIZONTALS; SEE HORIZONTAL VIEW FOR INFO 10" AW-122 FILLER SET IN BED OF SEALANT BACKER ROD/SEALANT & SHIMS (BY OTHERS) AN-1 ALUM ANGLE SHOP ATTACHED AT HEAD & SILL FOR PERIMETER SEALANT AW-132 GLAZING ADAPTOR; SEAL AT CORNERS AW-370 MULL CAP MODIFIED FOR JAMB CONDITION GP-112 SIDE BLOCK AS REQUIRED COSMETIC SEAL (BY OTHERS) Reliance -HTC - 90 Deg ISC at 1" Spandrel V9744 May OLDCASTLE ( ) V ISC-1glz
26 AW-800 MULLION AN-1 ALUM ANGLE (3/4"X 3/4" X 1/8").125" FORMED ALUM CLOSURE FS-13 #10 X 1" PPH TEK AT 18" O.C. SHEAR BLOCK AT HORIZONTALS; SEE HORIZONTAL VIEW FOR INFO 10" AN-1 ALUM ANGLE SHOP ATTACHED AT HEAD & SILL FOR PERIMETER SEALANT AW-370 MULL CAP MODIFIED FOR JAMB CONDITION AW-122 FILLER SET IN BED OF SEALANT BACKER ROD/SEALANT & SHIMS (BY OTHERS) AW-122 AW-130 GLAZING ADAPTOR; SEAL AT CORNERS WW-162 PRESSURE PLATE W/FS-325 #12-14 X 1 1 2" HWH DRIL 9" O.C. GP-112 SIDE BLOCK AS REQUIRED COSMETIC SEAL (BY OTHERS) Reliance -HTC - 90 Deg ISC at 1/4" Spandrel V9745 May OLDCASTLE ( ) V ISC-25glz
27 May OLDCASTLE ( ) V9746-SSG-Mull-175glz AW-804 SSG MULL GP-105 SPACER Reliance -HTC SSG Mullion at 1 3/4" Vision V9746 AW-375 SSG MULL CAP 1/2" 1" 1"
28 May OLDCASTLE ( ) V9747-SSG-Mull-1glz AW-804 MULLION Reliance -HTC SSG Mullion at 1" Spandrel V9747 GP-105 SPACER AW-133 ATTACH W/#10 X 2 1/ 2" FH 18" O.C. AW-375 SSG MULL CAP 1/2" 1" 1"
29 May OLDCASTLE ( ) V9748-SSG-Mull-25glz AW-804 SSG MULL Reliance -HTC SSG Mullion at 1/4" Spandrel V9748 SHEAR BLOCK AT HORIZONTALS; SEE HORIZONTAL VIEW FOR INFO GP-105 SPACER AW-131 ATTACH W/#10 X 2 1/ 2" FH 18" O.C. AW-375 SSG MULL CAP 1/2" 1" 1"
30 May OLDCASTLE ( ) V9749-SSG-Capt-Mull-175glz AW-804 MULLION GP-105 SPACER AW-125 TONGUE ADAPTOR; ATTACH WITH #10 x 3" 3 PER D.L.O. AW-375 SSG MULL CAP Reliance -HTC SSG/Captured Mullion at 1 3/4" Vision V9749 5/8" WW-110 FACE CAP WW-162 PRESSURE PLATE W/FS-325 #12-14 X 1 1 2" HWH DRIL 9" O.C.
31 May OLDCASTLE ( ) V9750-SSG-Mull-Opwin-175glz AW-804 MULLION Reliance -HTC SSG Mullion at Operable 1 3/4" Vision V9750 Operable Window go to /products/architectural-windows for the most current details and vent options 1/2" 1" 1" AW-312 rigid PVC isolator x 2" lg. GP-105 Isolator. Run between AW-312 AW-313 Closure Attach w/ (2) FS-23 (#6 x 3/8" PPH)
32 May OLDCASTLE ( ) H9715-Slab-Anchor WELD TO BE DETERMINED BY STRUCTURAL ENGINEER SLOT AT WINDLOAD ANCHOR HOLE AT DEADLOAD ANCHOR SIZE DETERMINED BY STRUCTURAL ENGINEER MULLION STEEL ANGLE PER JOB REQUIREMENTS TOP VIEW FASTENERS PER JOB REQUIREMENTS SIDE VIEW Reliance -HTC - Steel Slab H9715
33 "F" ANCHOR (SEE CHART) ANCHOR BOLT (BY OTHERS) DESIGN DETERMINED BY STRUCTURAL ENGINEER C.L. MULLION HEAD TYPICAL SHEAR BLOCK MULLION (SEE CHART) "F" ANCHOR CHART PART NO. MULLION WW AW-500, AW-550 WW AW-504 Reliance -HTC "F" Jamb H9716 WW WW AW-800. AW-850 AW-804 May OLDCASTLE ( ) H9716-F-JbAnchor-Hd
34 May OLDCASTLE ( ) H9717-T-Mull-Anchor-Hd "T" ANCHOR (SEE CHART) ANCHOR BOLT (BY OTHERS) DESIGN DETERMINED BY STRUCTURAL ENGINEER C.L. MULLION HEAD MULLION (SEE CHART) TYPICAL SHEAR BLOCK "T" ANCHOR CHART PART NO. MULLION WW AW-500, AW-550 WW AW-504 WW AW-240, AW-241 WW AW-250, AW-251 WW AW-800, AW-850 WW AW-804 Reliance -HTC "T" Mullion H9717
35 C.L. MULLION MULLION (SEE CHART) SILL TYPICAL SHEAR BLOCK "F" ANCHOR (SEE CHART) SHIM UNDER MULLION (BY OTHERS) ANCHOR BOLT (BY OTHERS) DESIGN DETERMINED BY STRUCTURAL ENGINEER "F" ANCHOR CHART PART NO. MULLION WW AW-500, AW-550 WW AW-504 Reliance -HTC "F" Jamb H9718 WW WW AW-800. AW-850 AW-804 May OLDCASTLE ( ) H9718-F-JbAnchor-Sill
36 C.L. MULLION MULLION (SEE CHART) SILL TYPICAL SHEAR BLOCK "T" ANCHOR (SEE CHART) SHIM UNDER ANCHOR BOLT (BY OTHERS) MULLION (BY OTHERS) DESIGN DETERMINED BY STRUCTURAL ENGINEER "T" ANCHOR CHART PART NO. WW WW WW WW WW WW MULLION AW-500, AW-550 AW-504 AW-240, AW-241 AW-250, AW-251 AW-800, AW-850 AW-804 Reliance -HTC "T" Mullion H9719 May OLDCASTLE ( ) H9719-T-Mull-Anchor-Sill
Reliance-HTC Curtain Wall 2 Glazing x 2-1/2 x 10-1/4
Reliance-HTC Curtain Wall 2 Glazing x 2-1/2 x 10-1/4 Table of Contents (Drawing numbers ie H9832 used as CAD detail reference only ) Elev_Rcw-HTC-175glz-10in-Capt Elev_Rcw-HTC-175glz-10in-SSG H9831-Head-175glz
More informationReliance-HTC Curtain Wall 1-3/4 Glazing x 2-1/2 x 7-1/4
Reliance-HTC Curtain Wall 1-3/4 Glazing x 2-1/2 x 7-1/4 Table of Contents (Drawing numbers ie H9702 used as CAD detail reference only ) Elev_Rcw-HTC-175glz-10in-Capt Elev_Rcw-HTC-175glz-10in-SSG H9701-Head-175glz
More informationReliance-HTC Curtain Wall 2 Glazing x 2-1/2 x 7-1/2
Reliance-HTC Curtain Wall 2 Glazing x 2-1/2 x 7-1/2 Table of Contents (Drawing numbers ie H9802 used as CAD detail reference only ) Elev_Rcw-HTC-175glz-10in-Capt Elev_Rcw-HTC-175glz-10in-SSG H9801-Head-175glz
More informationReliance-TC-Type l Standard Horizontals-Aluminum Pressure Plates Integral TC Verticals w/o Face Cap - 2-1/2 x7-1/4
Reliance-TC-Type l Standard Horizontals-Aluminum Pressure Plates Integral TC Verticals w/o Face Cap - 2-1/2 x7-1/4 Table of Contents (Drawing numbers ie H3405 used as CAD detail reference only ) Elev-RcwTC-Type
More informationReliance-TC-Type l Standard Horizontals-Aluminum Pressure Plates Integral TC Verticals w/o Face Cap - 2-1/2 x 6
Reliance-TC-Type l Standard Horizontals-Aluminum Pressure Plates Integral TC Verticals w/o Face Cap - 2-1/2 x 6 Table of Contents (Drawing numbers ie H3505 used as CAD detail reference only ) Elev-RcwTC-Type
More informationReliance-TC-Type ll Thermal Composite Type ll - Horizontals and Verticals w/ Aluminum Pressure Plate - 2-1/2 x 7-1/4
Reliance-TC-Type ll Thermal Composite Type ll - Horizontals and Verticals w/ Aluminum Pressure Plate - 2-1/2 x 7-1/4 Table of Contents (Drawing numbers ie H6404 used as CAD detail reference only ) Elev-RcwTC-Type
More information803 Airport Rd Terrell, TX (972) RELIANCE-TCIG -THERMAL COMPOSITE CURTAIN WALL - 2 1/2 x 7 1/4 -
803 Airport Rd Terrell, TX 75160 (972) 551-6100 RELIANCE-TCIG -THERMAL COMPOSITE CURTAIN WALL - 2 1/2 x 7 1/4 - Table of Contents (Drawing numbers ie V8401 used as CAD detail reference only ) Elevation_Rcw-TCIG_725
More information803 Airport Rd Terrell, TX (972) RELIANCE-TCIG -THERMAL COMPOSITE CURTAIN WALL - 2 1/2 x 6 -
803 Airport Rd Terrell, TX 75160 (972) 551-6100 RELIANCE-TCIG -THERMAL COMPOSITE CURTAIN WALL - 2 1/2 x 6 - Table of Contents (Drawing numbers ie V8501 used as CAD detail reference only ) Elevation_Rcw-TCIG_600
More informationReliance-TC-Type ll Thermal Composite Type ll - Horizontals and Verticals w/ Aluminum Pressure Plate - 2-1/2 x 6
Reliance-TC-Type ll Thermal Composite Type ll - Horizontals and Verticals w/ Aluminum Pressure Plate - 2-1/2 x 6 Table of Contents (Drawing numbers ie H6504 used as CAD detail reference only ) Elev-RcwTC-Type
More informationICR-225 WINDOW WALL SYSTEM B - 2-1/4 x 6. Table of Contents (Drawing numbers ie V8761 used as CAD detail reference only )
ICR-225 WINDOW WALL SYSTEM B - 2-1/4 x 6 Table of Contents (Drawing numbers ie V8761 used as CAD detail reference only ) Elev-ICR-225-System B-6.00in H8707-Intermediate Horizontal H8751-Head Horizontal
More informationFG-1000 Storefront - Center Set 1-3/4 x 4
FG-1000 Storefront - Center Set 1-3/4 x 4 Table of Contents (Drawing numbers ie H4701 used as CAD detail reference only ) Elev-Fg1000-Storefront H4701-Horizontal-Outside Glaze H4702-Head-Horizontal H4706-Stacked-Horizontal-Out
More informationBuildingEnvelope Oldcastle ( ) -
BuildingEnvelope 1-866-Oldcastle (653-2278) - www.obe.com FG-3000 STOREFRONT 2" X 4-1/2" / Elev-Fg3000-CenterSet H0601-Horiz-OutsideGlz H0602-Head-OutsideGlz H0603-Sill-OutsideGlz-10psf H0604-Sill-OutsideGlz
More informationBuildingEnvelope Oldcastle ( ) -
BuildingEnvelope 1-866-Oldcastle (653-2278) - www.obe.com FG-1000 STOREFRONT 1-3/ X / 1/ GLAZING / CENTER SET Elev-Fg1000-CenterSet H4701-Horiz-OutsideGlz H4702-Head-OutsideGlz H4703-Sill-OutsideGlz-10PSF
More informationSeries SSG and Captured corner mullion. Installation Instructions
Series 5500 SSG and Captured corner mullion Installation Instructions Part NO. Y556 February 2013 SECTION TABLE OF CONTENTS S-5500 SSG and Captured Corner Mullion Installation Instructions PAGE I. General
More informationRELIANCE-SS CURTAIN WALL INSTALLATION AND GLAZING MANUAL
RELIANCE-SS CURTAIN WALL INSTALLATION AND GLAZING MANUAL Note: The installation details found in this package are generic and are for representation only with the intent of giving the installation team
More information70 WALL FABRICATION - SEALANT - ERECTION
70 WALL FABRICATION - SEALANT - ERECTION GENERAL INSTALLATION NOTES SECTION 1 General Information................................... 3 Assessing the Opening................................. 4 SECTION
More informationUse steel clip angle as a drill template and drill through mullion. Install bolts with bolt heads on the masonry side of the jamb mullion.
Additional 200xpt and 250xpt installation instructions are shown on page 11. STICK METHOD ERECTION (refer to figures 1 and 2) Step 1 Establish all control lines and grades. Step 2 Attach steel intermediate
More informationhurricane resistant window wall systems
hurricane resistant window wall systems Table of Contents (SG) (SG) Table of Contents Finish Information page 2 RW-5000 StormMax 2-1/2" x 5" Wet Glazed Monolithic Laminated Glazing Extrusions page 3 RW-5000
More informationYCW 750 SplineTech Shop Glazed Curtain Wall System Installation Manual
YCW 750 SplineTech Shop Glazed Curtain Wall System Installation Manual 2009 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................
More informationYCW 750 SSG Structural Silicone Glazed Curtain Wall System 4 Side SSG Shop Glazed (2 Side Toggle Glazing Method) Installation Manual
YCW 750 SSG Structural Silicone Glazed Curtain Wall System 4 Side SSG Shop Glazed (2 Side Toggle Glazing Method) Installation Manual 2014 YKK AP America Inc. is a subsidiary of YKK Corporation of America.
More informationYCU 750 TU Unitized Curtain Wall System
ASSEMBLY INSTRUCTIONS Assembly Manual 2009 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................ Page ii PARTS
More informationYCU 750 TU Unitized Curtain Wall System
INSTALLATION INSTRUCTIONS 1 2 Installation Manual 2010 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................ Page
More informationapexfacades.com apexfacades.com Printed on 12/12/17
M E R I D I A N apexfacades.com 1.866.970.5948 apexfacades.com 4 5 0 T 1.0 H E R M A L L Y B R O K Meridian E N Pg- 1 S T O R E F R O N T THIS PAGE INTENTIONALY LEFT BLANK apexfacades.com 1.0 Meridian
More informationWv410 window. Installation Instructions
Wv410 window Installation Instructions Part NO. Y007 February 2014 TABLE OF CONTENTS SECTION PAGE I. Product Description and Limitations..........3 II. General Statements and Definitions........3 III.
More informationFIXED WINDOW SECTION DETAILS
FIXED WINDOW SCALE " = '-0" FIXED WINDOW SECTION PROFILE @ HEAD SCALE '-0" = '-0" FIXED WINDOW SECTION PROFILE @ JAMB SCALE '-0" = '-0" FIXED WINDOW SECTION PROFILE @ SILL SCALE '-0" = '-0" NAO84 STEEL
More information4 Season Enclosure. 3 Season Enclosure. Screen Enclosure. Suggested Installation Instructions. Patio Cover / Car Shield
4 Season Enclosure 3 Season Enclosure Screen Enclosure Patio Cover / Car Shield Suggested Installation Instructions Table of Contents 4 Season Enclosure... 1 Anchoring Details... 2 Installation - Under
More informationIntroduction...COMB-2 Design Considerations and Examples...COMB-3
SECTION DIRECTORY General Information Introduction...COMB-2 Design Considerations and Examples...COMB-3 Combination Assembly Recommendations and Limitations Composite Configurations...COMB-4 Typical Sealant
More informationASTM E 1886 and ASTM E 1996 TEST REPORT. Report No.: A Rendered to: CORAL ARCHITECTURAL PRODUCTS Tuscaloosa, Alabama
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: A2651.02 401 44 Rendered to: CORAL ARCHITECTURAL PRODUCTS Tuscaloosa, Alabama PRODUCT TYPE: 90 Corner Curtain Wall SERIES/MODEL:
More information1Perma-Shield Gliding Doors (PSI 1968 to 1978)
1Perma-Shield Gliding Doors (PSI 1968 to 1978) Parts Catalog Main Menu Section TOC Search What s in This Section 2-Panel, 3-Panel, and Sidelights...................................... Page 3 Parts Illustration...........................................................
More information250 SERIES 1" STRUCTURAL TUBE MULLION ASSEMBLY INSTRUCTIONS
2014 Pella Corporation Part Number: V985711 250 SERIES 1" STRUCTURAL TUBE MULLION ASSEMBLY INSTRUCTIONS Be sure to thoroughly read and understand all the steps before beginning the mullion assembly process.
More information1Perma-Shield Gliding Doors (PSI 1968 to 1978)
1Perma-Shield Gliding Doors (PSI 1968 to 1978) Parts Catalog Main Menu Section TOC Search What s in This Section 2-Panel, 3-Panel, and Sidelights...................................... Page 3 Parts Illustration...........................................................
More informationA201 DOUBLE HUNG Sill WHITE - UI0028S1 ALMOND - UI0028S4 CLAY - UI0028S5 BRZ/WHT - UI HEAD/JAMB
estbridge Elite Signature A201 DOUBLE HUNG GENTEK BUILDING PRODUCTS LIMITED 0201 SILL - STUCCO WHITE - UI0102S1 ALMOND - UI0102S4 CLAY - UI0102S5 BRZ/WHT - UI010292 0201 Sill WHITE - UI0028S1 ALMOND -
More informationAMS MU800 Mullion Drained Curtain Walling
SPECIFICATION AMS MU800 Mullion Drained Curtain Walling The AMS MU800 mullion drained curtain walling system offers unique architectural design features combined with market leading weather performance.
More informationRange Name Description Use With Finish Pack Size. 90 Flat Angled fixing bracket. Steel. 90 Angled fixing bracket. Steel. Steel
Pack Size Fixing Brackets CB20 90 Flat Angled fixing bracket Use with, and glazed. CB40 3 Way "T" Plate Use with, and glazed. CB60 90 Angled fixing bracket Use with, and glazed. CB80 Flat Joining Strip
More information2500 UT Unitwall System
JULY, FETURES 1 Features 2500 UT Unitwall is a pre-glazed unitized curtain wall 2-1/2" (63.5) sight line and 7-1/2" (0.5) Captured system depth or 6-1/2" (5.1) 4-side SSG system depth Prefabricated and
More informationJOINING MULLION (DIRECT MULL) ASSEMBLY INSTRUCTIONS FOR 3-WAY OR 4-WAY JOINTS FOR IMPERVIA AWNING, CASEMENT AND LARGE AWNING
2014 Pella Corporation JOINING MULLION (DIRECT MULL) ASSEMBLY INSTRUCTIONS FOR 3-WAY OR 4-WAY JOINTS FOR IMPERVIA AWNING, CASEMENT AND LARGE AWNING For Additional Mullion Assembly Information; Visit www.installpella.com/mullions,
More informationMetroView TM FG 501T Window Wall
JULY, 0 FEATURES Features is an inside glazed system -/" (.) sight line with standard " () system depth IsoLock TM lanced pour and debridged /" (.) thermal break Screw spline fabrication and joinery Standard
More informationSeries 2050 Garden Window Frequently Asked Questions
1. What is the difference between new construction and retrofit? The difference is in the overall jamb depth and required components: For new construction, the flash flange on the head of the unit is left
More informationKestrel Aluminium Systems Limited. Product Manual Section 6 Low Rise Curtain Walling. Manual Version
Limited Product Manual Section 6 Manual Version 23.0.1 Section 6.01 Product specification 6.01.01 sheet 1 Product Specification 6.01.02 sheet 1 Product Specification 6.01.03 sheet 1 Product Specification
More informationAccentra Pellet Insert Installation into Zero Clearance Wood Fireplaces
Accentra Pellet Insert Installation into Zero Clearance Wood Fireplaces 1-00-674205 Contents: 1. 36 of 24 gauge wire 0-88-886013 2. HWH TEK 10 x 3/4 3-30-511007517 3. Flue insulation 3-44-674205 4. Installation
More information4 1 2" System Depth Dry Glazing Compatible with a variety of Windspec doors and operable windows Available in anodized and painted finishes
THE 655 SERIES ENHANCES THE POPULAR FLUSH GLAZING SYSTEM BY INCREASING ITS THERMAL PERFORMANCE. BY UTILIZING AN ADVANCED GLASS-REINFORCED NYLON THERMAL BREAK, THE 655 SERIES RAISES OUR TRADITIONAL FLUSH
More informationKAWNEER 1786 RIM EXIT DEVICE
FEBRUARY, 2015 1 DOOR STILE Device C L 40" 41-9/32" Cylinder C L Bottom of door RIM EXIT DEVICE LOCATION DOGGING KEY EXIT DEVICE FILLER PLATE CYLINDER & CYLINDER RING HOUSING COVER CYLINDER INSTALLATION
More informationVinyl French Door Assembly Instructions
Vinyl French Door Assembly Instructions SERIES FD 5455/5555 Para instrucciones en español, visite: http://bit.ly/pgtassemblyinstructions FD 5455 / 5555 Parts List ITEM 1 FD 5455/5555 PARTS LIST FRAME HEAD
More informationArcade Windows. Architectural Design Manual. July 2014
s Architectural Design Manual July 2014 Table of Contents Layouts... 1 Cross Sections Details... 14 Mullion Cross Section Details... 22 Grill Patterns... 39 Grill Option Details... 46 Bracket Details...
More informationThermaWall XTRM2600 Unitized Curtain Wall
ThermaWall XTRM2600 Unitized Curtain Wall Unitized thermally broken curtain wall - Capped and SSG, 2 1/2" (63.5mm) and 3" (76.2mm) profile widths, various system depths. Mur-rideau à bris thermique unitisé
More informationADVANCE PRODUCTS & SYSTEMS, INC. FOR FLANGES, VALVES & EXPANSION JOINTS SAFETY SPRAY SHIELDS CONTAINS AND DETECTS HAZARDOUS SPRAYOUTS
ADVANCE PRODUCTS & SYSTEMS, INC. FOR FLANGES, VALVES & EXPANSION JOINTS SAFETY SPRAY SHIELDS CONTAINS AND DETECTS HAZARDOUS SPRAYOUTS SAFETY SPRAY SHIELDS FOR FLANGES CLOTH Our plastic cloth safety shields
More informationStructural Mullion System
Structural Mullion System Installation Instructions DNA Part Number 10300085 This system is designed to allow for larger window combinations. It is not intended to replace structural members in a building.
More information* * 4023 KR. Step 1 Prepare the Keyed Removable Unit. Not for use on electric or fire rated removable mullions
condition. *64009-00* 64009-00 Keyed Removable Mullions 403 KR Installation Instructions Not for use on electric or fire rated removable mullions This kit includes the following parts: (Not to scale) 5/6
More informationSECTION B2 SERIES CF451T STOREFRONT SYSTEM 2" X 4 1 /2" for 1" GLAZING
SECTION B2 SERIES CF5T STOREFRONT SYSTEM X / for " GLAZING www.cardcompro.com SECTION B2 SERIES CF5T (Thermal) STOREFRONT SYSTEM SERIES CF5 (Non-Thermal) STOREFRONT SYSTEM X ½" FOR " GLAZING TABLE OF
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS KR54, KR1654, & KR4954 Keyed Removable Mullion NOT FOR USE ON ELECTRIC OR FIRE RATED MULLIONS. This kit includes the following parts: (Not to scale) WARNING Remove key, reinstall,
More informationAPV PUMPS. Puma Pump Series III FREEPHONE: Pump assembly (Series III) Shrouded Type. Unshrouded Type
Puma Pump Series III Shrouded Type Unshrouded Type 2 Pump assembly (Series III) Freephone lines are open between 8.00am and 5.30pm Monday to Friday FREEFAX: 0800 801404 PUMA PUMP SERIES III (PAGE 2) PUMP
More informationZICO 3090PM4. Horizontal Hard Suction Mount Kits HHS-TM-1, HHS-TM-2, HHS-TM-1-ST, HHS-TM-2-ST, HHS-TMV-2, HHS-TMV-2-ST Parts and Instruction Manual
Horizontal Hard Suction Mount Kits Models HHS-TM-1, HHS-TM-2, HHS-TM-1-ST, HHS-TM-2-ST, HHS-TMV-2, HHS-TMV-2-ST Parts and Instruction Manual ZICO 3090PM4 Rev. 9-27-18 I. SYSTEMS AVAILABLE A. HHS-TM-1:
More information. crealco C A S E M E N T Index Legal Disclaimer 5 Profile Identification 6-8 Hardware Identification 9 New Crimper 10 Butterfly Gasket and Wed
. crealco C A S E M E N T 3 0. 5 CASEMENT 30.5 PRODUCT MANUAL 2013 Wispeco (Pty) Ltd, All Rights Reserved Revision: October 2013 . crealco C A S E M E N T 3 0. 5 Index Legal Disclaimer 5 Profile Identification
More informationCONTENTS. 1. Types of confections. 2. Profile overwiev. 3. Setting the metallic reinforcements. 4. Millings, drillings. 5. Welding. 6.
CONTENTS 1. Types of confections 2. Profile overwiev 3. Setting the metallic reinforcements 4. Millings, drillings 5. Welding 6. Assembly 7. Glazing 8. Finalizing the confection 9. Coupling the confections
More informationADDED PROTECTION FOR SLIDE-OUT ROOMS. Installation. Introduction... 2 Product Overview...2 Component Checklist...3
CAREFREE SIDEOUT KOVER II RV Installation ADDED PROTECTION FOR SLIDE-OUT ROOMS TABLE OF CONTENTS SOKII Shown with Full Case Option Introduction... 2 Product Overview...2 Component Checklist...3 Installation...
More informationSECTIONAL OVERHEAD DOORS
SECTIONAL OVERHEAD DOORS Why choose Insulated Sectional Overhead Doors? 25mm approx. 40mm This leaflet is offered as a guide for the Trade when presenting the arguments in favour of specification and selection
More informationSECTION B1 SERIES 450 STOREFRONT SYSTEM 1 3 /4" X 4 1 /2" for 1 /4" GLAZING
SECTION B SERIES 450 STOREFRONT SYSTEM 3 /4" X 4 /2" for /4" GLAZING www.cardcompro.com TIS PAGE INTENTIONALLY LEFT BLANK SECTION B SERIES CF450 STOREFRONT SYSTEM ¾" X 4½" FOR ¼" GLAZING TABLE OF CONTENTS
More informationVisions 3000 Series 9404 Parts Catalog
3000 Series Visions 3000 Series 9404 Parts Catalog #1218587 FOR PRODUCT PRODUCED AFTER 4/07 Slider Single Slider Triple Slider (1/4-1/2-1/4) Triple Slider (Equal Sash) Mull/Stack/Picture/Transom mull/stack
More informationADVANCE PRODUCTS & SYSTEMS, INC. FOR FLANGES, VALVES & EXPANSION JOINTS SAFETY SPRAY SHIELDS CONTAINS AND DETECTS HAZARDOUS SPRAYOUTS
ADVANCE PRODUCTS & SYSTEMS, INC. FOR FLANGES, VALVES & EXPANSION JOINTS SAFETY SPRAY SHIELDS CONTAINS AND DETECTS HAZARDOUS SPRAYOUTS SAFETY SPRAY SHIELDS FOR FLANGES CLOTH Our plastic cloth safety shields
More informationSigma. Did you know? Do you need? x Diameter. Pellet
Sigma Single Wall Matt Black 2.2 Nova Twin Wall Chimney System 2.4 Nova Matt Black Twin Wall Chimney System 2.10 Flexible Flue Liner & Fittings 2.14 Sigma Suitable for: Woodburning & Solid Fuel Designation
More informationPN 3000 Series Fail Closed Pneumatic Actuators
PN 3000 Series Fail Closed Pneumatic Description A of compact linear actuators having 5 diaphragm sizes for matching the requirements of 1/2" to 4" Spira-Trol valves at various differential pressures.
More informationTWO PERSON WALL MOUNT
ONE TIER TWO TIER THREE TIER FOUR TIER FIVE TIER SIX TIER 16 PERSON TWO PERSON WALL MOUNT Specifications Body: Entire unit (bottom, sides, top, back, and shelves) constructed of mild cold rolled 24 ga.
More informationArchitectural Manual. Thermally Improved Aluminum Series Windows & Patio Doors
Architectural Manual Thermally Improved Aluminum Series Windows & Patio Doors Instructions on how to use this manual: This document has been designed for easy navigation and to quickly click to the section
More information260 INSTALLATION OF OPTIONAL MARINE HEAD THRU-HULL, VENT, AND DECK PLATE
INSTALLATION OF OPTIONAL MARINE HEAD THRU-HULL, VENT, AND DECK PLATE DRILLING HOLES FOR THE WASTE VENT AND WASTE DECK PLATE: 3 9 3 1/2 Drilling hole for the waste vent. Measure from the walk through outboard
More informationInstallation Instructions for the Rolltec Adalia X3M Extenda Awning
Installation Instructions for the Rolltec Adalia X3M Extenda Awning Questions? Call Rolltec at 1-800-667-0474 General Tool Requirements Table of Contents Available installation brackets Side dimensions
More informationCurtain wall system ALBIO R50
Curtain wall system Technical Catalogue Curtain wall system Table of content Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Chapter 6 Chapter 7 General informations Overview of profiles & accessories
More informationSolera Power Awning OEM INSTALLATION MANUAL
Solera Power Awning OEM INSTALLATION MANUAL TABLE OF CONTENTS System Information 2 Safety 2 Prior To Installation 2 Resources Required 2 Awning Rail Installation (If Needed) 3 Installation 3 Awning Installation
More informationCOOPER FREESTANDING TUB FAUCET INSTALLATION
SKU(s): 940972 COOPER FREESTANDING TUB FAUCET INSTALLATION BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no
More informationDOOR - Single Leaf, Premium Duty, Quick-Acting Model 1430 Features 1
DOOR - Single Leaf, Premium Duty, Quick-Acting Model Features 1 FREEMAN MARINE Quick-Acting doors feature patented chain-drive, single actuation dogging. This design feature allows for quick-acting doors
More information7500 Wall Curtain Wall System
SEPTEMER, 201 500 Wall urtain Wall System FETURES 1 Features High performance curtain wall, ground-floor framing and entrance system, or horizontal strip window 24mm and 4mm IsoWeb TM glass-reinforced
More informationCOMP 6 Frame Parts. Comp (U1 REVISED) 6.1
COMP 6 Jamb Profiles...6.3 Head Jambs - Standard...6.4 Head Jambs - Arch and Radius...6.5 Head Jambs - Continous with 1 Sidelite and Double Doors...6.6 Head Jambs - Triple and Single with 2 Sidelites...6.7
More informationINSTALLATION INSTRUCTIONS for folding arm awnings
Custom made Awnings and Blinds Item No 0757 INSTALLATION INSTRUCTIONS for folding arm awnings IMPORTANT INFORMATION BEFORE INSTALLING YOUR Updated 08/09/15 AN AWNING INSTALLATION IS A HOME IMPROVEMENT
More informationCUSTOMER TECHNICAL MEMO # 286
CUSTOMER TECHNICAL MEMO # 286 Subject ecowall 225 Manufacturing drawings for Structurally Glazed Mullions Date: 16th February 2017 Author: Product Development Team We are very pleased to advise we have
More informationSpiral Duct. Contents. Introduction 1. Duct & Fitting Range 2. Duct Sizes 3. Fittings 5. Round Duct Connector 7. Installation 8
Contents Introduction 1 Duct & Fitting Range 2 Duct Sizes 3 Fittings 5 Round Duct Connector 7 Installation 8 Celmec International Pty Ltd ACN 005 850 546 Melbourne Tel: +61 3 8552 8200 Fax: +61 3 9555
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS C24DA/GA-SERIES STEAMERS C24GA6 C24GA10 C24DA6 C24DA10 ML-138085 ML-138088 ML-152022 ML-152023 VULCAN-HART DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC 3600 NORTH POINT BLVD.,
More informationCurtain Wall Systems. A R C H I T E C T U R A L A L U M I N I U M G L A Z I N G S Y S T E M S
Kawneer UK Ltd Astmoor Road, Astmoor Industrial Estate Runcorn, Cheshire WA7 1QQ, United Kingdom Tel: + (0) 1928 20 Fax: + (0) 1928 21 London Office Berwick Street Soho London W1F 0PN Tel: + (0) 207 287
More information* * KR54-F, KR9854 & KR9954 Installation Instructions. Read All Warnings Before Starting Installation! Index:
*941061-00* 941061-00 Keyed Removable Mullion KR54-F, KR9854 & KR9954 Installation Instructions CLASSIFIED CLASSIFIED C Read All Warnings Before Starting Installation! Index: General Information ----------------
More informationInstallation instruction
Installation instruction Ci51 116 FACTS Technical specifications Model i51 Log box (option) Output 6-11 kw Nominal output 8 kw Efficiency 80 % Weight (kg) 215 50 Powerstone (option): + 100 kg Width (mm)
More informationMiscellaneous Framing
JANUARY, 2017 INDEX 1 SAFETY RAILS...2 APPLIED GLASS STOPS...3 TUBES...4 STOOL TRIM AND ACCESSORIES...5 LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE, WINDOW, AND CURTAIN
More informationPRODUCT INFORMATION MANUAL SECTION: 17 METAL LOUVRE AWNINGS METAL LOUVRE AWNINGS
METAL LOUVRE AWNINGS Sizes & Limitations Metal Louvre Awnings TRINIDAD TRINIDAD SUNGUARD FIXED ADJUSTABLE Maximum Width Unlimited 5000mm Unlimited Minimum Width 500mm 500mm 500mm Maximum Drop 4000mm 2500mm
More informationInstallation Accessories and Applications
SECTION DIRECTORY Installation Accessories and Applications Introduction...W-IA-2 Window Attachment Options...W-IA-4 Subsill...W-IA-6 Exterior Mullions...W-IA-8 Mullion Cover Application...W-IA-10 Mullion
More informationTECHNICAL SUPPORT HOT LINE HOURS: 7:30-3:30
TECHNICAL SUPPORT HOT LINE 1-800-526-0725 HOURS: 7:30-3:30 TO: Service Providers BULLETIN No: 0102-1 FROM: SUBJECT: BOB VAN WYCK Technical Support Manager Burner Pilot Tube Replacement DATE: Feb 1, 2001
More informationPROFILE SYSTEM HANDLES, LOCKS, STOPS HANDLE, LOCKS, STOPS 108 MINITEC PROFILE SYSTEM
PROFILE SYSTEM HANDLES, LOCKS, STOPS s pot S, s k c ol, s e l dnah HANDLE, LOCKS, STOPS 108 MINITEC PROFILE SYSTEM HANDLE AL Part. N 21.1138/0 - Aluminium, natural anodized - Weight 0,050 kg - Show cases
More informationAAMA THERMAL PERFORMANCE REPORT. Rendered to: UNITED STATES ALUMINUM. SERIES/MODEL: 3250 Curtain Wall (Site-Built) TYPE: Glazed Wall System
Architectural Testing AAMA 507-07 THERMAL PERFORMANCE REPORT Rendered to: UNITED STATES ALUMINUM SERIES/MODEL: 3250 Curtain Wall (Site-Built) TYPE: Glazed Wall System Report No: Report Date: B6898.01-116-45
More informationSolera Classic Awning OEM INSTALLATION MANUAL
Solera Classic Awning OEM INSTALLATION MANUAL TABLE OF CONTENTS System and Safety Information 2 Preparation 3 Resources Required 3 Installation 3 Installing the Awning Rail (If Necessary) 3 Assembling
More informationTip-Over Switches - Non Mercury Contacts
Tip-Over Switches - Non Mercury Contacts SWITCH OPERATION CW172-1 CW1740-1 CW12-0 Tip-over switches are designed to switch on/off when tilted from the vertical position. CW12-0 CW12-1 0.2 ± 10 Ω at Vdc
More informationA A A T E C H N O L O G Y
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. H A R D W A R E C A T A L O G TOTAL SOLUTION SERVICE For the Industrial Piping Marketplace 2011 www.aaatech.com 4 0 Y E A R S S E R V I N G I N D U S T
More informationInstallation Instructions for the Rolltec Physique XL Awning
Installation Instructions for the Rolltec Physique XL Awning Questions? Call Rolltec at 1-800-667-0474 General Tool Requirements Table of Contents Available installation brackets Side dimensions of various
More informationTuf-Lite and Tuf-Lite II Fans 6000M Series Hub
Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 32.8 or 10 Meter Diameter Hudson Tuf-Lite and Tuf-Lite II fan blades Hudson Tuf-Lite (black) fan blades
More informationHigh energy efficiency
High energy efficiency NX-000 Series Thermal Windows Thermal Performance Merges with Adaptable Design to Offer More Choices Maine East High School, Park Ridge, Illinois Architect: ARCON Associates Inc.,
More informationAJW. Athletic Series Lockers. Architectural Products ONE TIER TWO TIER THREE TIER FOUR TIER FIVE TIER SIX TIER
ONE TIER TWO TIER THREE TIER FOUR TIER FIVE TIER SIX TIER Specifications Body: Backs constructed of mild cold rolled 18 ga. commercial grade steel. Bottom, sides, top, and shelves constructed of 16 ga.
More informationOWNER S MANUAL. Version /2011 TEAL CAMPER OWNER S MANUAL. copyright Teal International Corporation
OWNER S MANUAL Version 1.1-11/2011 INDEX Introduction.... 3 Camper Shell Assembly.... 4 STEP 1 - Floor Board... 5 STEP 2 - Panel Assembly...................6 STEP 3 - Door Frame Assembly... 8 Popup Roof...
More informationBASIC FIRE DOOR REQUIREMENTS TECHNICAL DATA SHEET NO. 401
BASIC FIRE DOOR REQUIREMENTS SHEET NO. 401 Fire door openings are classified by their locations in the building. The location determines the length of exposure protection required, based on the potential
More informationTuf-Lite II Fans 8000 Series Hub
Tuf-Lite II Fans 8000 Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 34 through 40 Diameter Hudson Tuf-Lite II (white, prev. blue**) fan blades are made from
More informationTable and Furniture Base Fittings Furniture Feets
Aluminium base plate Material: Steel screw Finish: Screw galvanized Installation: With M8 screw Aluminium 14 634.50.465 Accessories Aluminium 634.50.460 Packing: 20 pcs. Aluminium 634.50.469 Packing: 20
More informationAB KNOCK-DOWN WATER BOILER
FORM 2344 3/25/2004 AB KNOCK-DOWN WATER BOILER TABLE OF CONTENTS Description Page KNOCK-DOWN TYPES AND DEFINITIONS 1 BOILER FOUNDATION 1 BOILER FRAME & TUBE INSTALLATION 2 BASE PAN INSULATION 4 TUBE BAFFLE
More informationGV Standard Skyhatch Manual
GV Standard Skyhatch Manual Operation and Maintenance Manual Technical experts in the design, manufacture and supply of precision engineered, architectural rooflights for residential and commercial buildings.
More informationUniversal 10 x 27 Canopy
Universal 10 x 27 Canopy C81027PC Size: 10 8 x 27 x 6 8 (side) x 9 9 (center) With 10 Legs, Frame, and Cover Powell & Powell Supply Company Distributed by: 1730 Five Points Lane Fuquay-Varina, North Carolina
More informationC Locker. Options: Small compartment storage perfect for personal effects. Louvered doors, simple and convenient to open and close.
C Locker C lockers offer a functional design to meet most applications, perfect for company changing rooms. No moving parts, double panel door and polypropylene handle with sound deadening retention. Small
More informationFIESTA & FIESTA HD PATIO AWNINGS
INSTALLATION MANUAL FIESTA & FIESTA HD PATIO AWNINGS MANUALLY OPERATED PATIO AWNING RV Read this manual before installing or using this product. Failure to follow the instructions and safety precautions
More information