CURRICULUM VITAE. 7. Language skills: Indicate competence on a scale of 1 to 5 (1 - excellent; 5 - basic)

Transcription

1 CURRICULUM VITAE 1. Family name: Pajaziti 2. First names: Arbnor 3. Date of birth: Nationality: Kosovar 5. Civil Status: Married 6. Education: Doctor of Technical Sciences Institution Date from - to Technical Faculty, University of Prishtina Faculty of Mechanical Engineering and Ship Construction, University of Zagreb, Croatia Vienna University of Technology, Vienna, Austria Degrees and Diplomas obtained Graduated Mechanical Engineer Master of Science in Technical Sciences Doctor of Technical Sciences 7. Language skills: Indicate competence on a scale of 1 to 5 (1 - excellent; 5 - basic) Language Reading Speaking Writing Albanian (native) English Croatian, Serbian German Membership of professional bodies: ASME (American Society of Mechanical Engineering) since 2005 CITT Center for Innovation and Transfer of Technology since Other skills: 10. Present position: Full at the Faculty of Mechanical Engineering, University of Prishtina 11. Years within the faculty: 1984-present 12. Key qualifications: (Relevant to the sub-sector above) 13. Specific experience in the region:

2 Country (Date) from- (Date) to Austria Austria Germany Italy Austria USA USA Croatia

3 14. Professional experience: Date (from to) Prishtina University of Prishtina, Rectorate Prishtina Department of Mechatronics, Faculty of Mechanical Engineering, University of Prishtina Rochester School of Electrical and Computer Engineering, Oakland University, Rochester, Michigan, U.S.A Prizren Faculty of Computer Sciences, University of Prizren Prishtina, Universum University College present Location Company Position Description Ferizaj Prishtina Faculty of Mechanical Engineering Vice-Rector Chief of the Department Fulbright Scholar Visiting Part Part time Full present Prishtina Ministry of Education, Science and Technology Expert Graz Joanneum University of Associate Applied Sciences, Austria Genova University of Genova, Italy Associate Prishtina University of Prishtina, Faculty Coordinator present of Electrical and Computer Engineering and Faculty of present Prishtina Mechanical Engineering Ministry of Education, Science and Technology Board Member Vice-Rector for Budget and Finance Chief of the Department of Mechatronics Design, Implementation, Computer Simulation and Navigation Control of the Mobile Robots Software Design, Sensors and Interfaces, Engineering Requirements and System Design, Systems Programming Discrete Structures, Introduction to Data Structures Engineering Graphics, Dynamics of Machines, Engineering Control of Equipments and Industrial Robots, Intelligent Transport Systems, Road Telematics, Mechatronic Project 1, Advanced Robotics Development of Curriculum Framework for Preuniversity Education Industrial Robots Optimization Techniques Coordinator for the development of Curriculum of the Master Degree Studies on Mechatronics with Joanneum University of Applied Sciences, Graz, Austria. Board Member of the Center for Innovation and Transfer of Technologiy in Kosovo Prishtina Kosovo Accreditation Agency Board Member Board Member of National Council for Quality Assurance of High Education in Kosovo Prishtina Faculty of Mechanical Engineering Associate Robots and Manipulators, Industrial Robots, Mechatronics, Autonomous and Mobile Robots, Technical Application of Intelligent Systems Prishtina Faculty of Mechanical Assistant Theory of Machines, Fundamentals on Robotics Engineering 2003 Prishtina Ministry of Education, Science Expert I was appointed by the Ministry of Education, Science and Technology as an

4 and Technology Tetovo University of Tetovo, Macedonia Prishtina Faculty of Mechanical Engineering Prishtina Faculty of Mechanical Engineering Assistant Lecturer Assistant expert to develop the Curriculum for the Subject of Technology of Elementary and Secondary Schools. Delivering training also for several courses in the field of technology: handcraft, technology and information and communication technology. Applicative Programs, Computer Graphics Mechanisms, Theory of Constructions Descriptive Geometry, Mechanical Drawings 15. Other relevant information: (e.g. Publications) BOOKS AND MANUSCRIPTS A. BOOKS: 1. Arbnor Pajaziti: Automatic Data Processing, a textbook for Secondary Schools, Prishtina, 1990 (translation in Albanian). 2. Shaban Shabani, Arbnor Pajaziti: The Elements of Automations and Robotics, a textbook for High Schools, Prishtina, Arbnor Pajaziti; Fundamentals on Robotics, a textbook for students, University of Prishtina, Prishtina, Arbnor Pajaziti, Vjollca Komoni, Enver Hamiti, Kimete Dida: Technology, a textbook for Secondary School, Grade 7, Prishtina, Arbnor Pajaziti, Vjollca Komoni, Enver Hamiti, Kimete Dida: Technology, a textbook for Secondary School, Grade 8, Prishtina, Arbnor Pajaziti, Vjollca Komoni, Enver Hamiti, Kimete Dida, Agron Dida: Technology and ICT, a textbook for Secondary School, Grade 9, Prishtina, Arbnor Pajaziti, Vjollca Komoni, Enver Hamiti: Handcraft, a textbook for Elementary School, Grade 5, Prishtina, Arbnor Pajaziti: Robotics in Kosovo, Edition Scientific Research, University of Prishtina, Using Robots in Hazardous Environment-Landmine detection, de-mining and other applications, Edited by Y. Baudoin and Maki K. Habi, WoodHead Publishing in Mechanical Engineering, Cambridge, UK, pp , Machine Dynamics, a textbook for students, University of Prishtina, Prishtina, B. MANUSCRIPTS: 1. Arbnor Pajaziti: Applicative Programs, a manuscript for students of the University of Tetovo, Tetovo, Arbnor Pajaziti: Computer Graphics, a manuscript for students of the University of Tetovo, Tetovo, Arbnor Pajaziti, Luan Ahma, Enver Hamiti : Information and Communication Technology, a manuscript for High Schools, Grade 11, Prishtina, Arbnor Pajaziti: Optimization Techniques, University of Genova, EMARO Master Study Program, Genova, Italy, Arbnor Pajaziti: Robots and Manipulators, a manuscript for students of the University of Prishtina, Peter Kopacek, Arbnor Pajaziti: Advanced Robotics Mobile and Service Robots, a manuscript for the master students of the University of Prishtina, Arbnor Pajaziti: Medical Information Systems, a manuscript for the master students of the University of Prishtina, Arbnor Pajaziti, Marina Markus: Robotics, Textbook, teaching material for Mechatronics, DRIMS Tempus IV Project DE JPCR, 2012.

5 9. Arbnor Pajaziti: Sensors and Interfaces, Authorized lectures, University of Prizren, Arbnor Pajaziti: Information Management, Authorized lectures, University of Prizren, Arbnor Pajaziti: Systems Programming, Authorized Lectures, University of Prizren, Arbnor Pajaziti: Discrete Structures, Authorized Lectures, Universum University College, Arbnor Pajaziti: Introduction to Data Structures, Authorized Lecture, Universum University College, INTERNATIONAL PROJECTS The designer of TEMPUS PHARE JEP Project titled: Promotion of links between the University and Industry in Mechanical Engineering developed in the Mechanical Engineering Faculty, University of Prishtina with three following University Centers: University of Technology, Vienna, Austria, University of Lecce, Italy, and University of Bergakademie, Freiberg, Germany. Project developed in the period Participation at the TEMPUS project titled: FAITH Increasing the Financial Autonomy and Accountability at public higher education institutions in Kosova TEMPUS AT-TEMPUS-SMGR, 01/01/ /11/2016. Short Mobility Experience Exchange/Visiting Lecturer in period : 10 September -14 September 2012: Workshop and conference title: Perspectives of Mechatronics Engineering St. Kliment Ohridski University Bitola, Ohrid, Macedonia, TEMPUS IV DRIMS - Development of Regional Interdisciplinary Mechatronics Studies. 4 October 8 October 2012: Lecture for the Mechatronic students, vising laboratories and meeting with Dean of Faculty of Mechanical Engineering in Skopje, discussion on student projects and further cooperation. TU Vienna,Vienna, Austria TEMPUS IV DRIMS - Development of Regional Interdisciplinary Mechatronics Studies. 18 October - 21 October 2012: Vising facilities and laboratories of UKLO, meeting with academic staff and students of Technical Faculty and discussion on student projects and further cooperation. St. Kliment Ohridski University Bitola, Ohrid, Macedonia TEMPUS IV DRIMS - Development of Regional Interdisciplinary Mechatronics Studies. 14 January January 2013 One week training and workshop on Robot Operating System (ROS) at laboratories of Robotics at Aachen University of Applied Sciences. University of Applied Sciences, Aachen, Germany TEMPUS IV DRIMS - Development of Regional Interdisciplinary Mechatronics Studies. 22 April April 2013 Presentation of the paper at the International Conference for demonstration of the equipment at improvised minefield near Šibenik, HUDEM 2013, Šibenik, Croatia.

6 29 August 31 August 2013 Presentation of the paper at IASH 2013 Conference in Tirana, IASH 2013 Tirana, Albania 8 TH ANNUAL MEETING OF INSTITUTE ALB-SHKENCA, Tirana, August June 15 June 2014 Participation as Judge at the IGVC 2014 Competitions, Oakland University, Michigan, U.S.A. 12 August 15 August 2014 Presentation of the paper at the International Conference ICAT 2014, Antalya, Turkey. 26 April 29 April 2015 Presentation of the paper at the 12th International Conference of Equipment Exhibition MINE ACTION 2015, Biograd na Moru, Croatia. 21 September 25 September 2015 Presentation of the achieved results of the TIRAMISU Project, Royal Military Academy, Brusseles, Belgium. 4 November 6 November 2015 Short visit of the Faculty of Transport Sciences, University of Zagreb, Croatia. 2 March 2017 Lecture at the Politechnical University of Tirana, Albania. 8 May 11 May 2017 Lecture at the Politechnical University in Genova, Italy. 8 May 11 May 2017 Presentation of the paper at the 7 th International ENERGY Conference & Workshop - REMOO Venedik, Italy. 28 May 6 June 2017 Participation as Judge at the IGVC 2017 Competitions, Oakland University, Michigan, U.S.A. 18 September 23 September 2017 Short visit of the University of Applied Sciences Technische Hochschule Mittelhesen, Campus Friedberg, Germany. 17 November 18 November 2017 Presentation of the paper at the 1 st International Conference Engineering and Entrepreneurship ICEE-2017 Tirana, Albania. 3 May 5 May 2018 Presentation of the paper at the 16 st NETTIES Conference on Access to Knowledge in the 21 st Century, May 2018, Corfu, Greece.

7 10 June 18 June 2018 Lecture at the Faculty of Mechanical and Shipbuiding, University of Zagreb, Croatia. 6 September 7 September 2018 Presenation of the paper at the Intelligent Systems Conference September 2018, London, UK. INTERNATIONAL SCIENTIFIC PUBLICATIONS 1. Working Characteristics of Shock Absorber of Automobile Zastava 101", (co-author with A.Geca), Scientific Journal of Technical Faculty, No.3, pp.49-60, Prishtina, Computing program for safety rate against destruction and pitting of cylindrical gear pairs, (co-author with B.Baxhaku), Paper of XEMK Kosovo Electroeconomy Combine, Prishtina, Computing package programs of production process in the Department of assembling, Factory of Shock Absorbers in Prishtina, Prishtina, Contribution on Kinematics Synthesis of Robot Manipulators", Master of Science Work, Faculty of Mechanical Engineering and Naval Building, Zagreb, Kinematics Analysis of Planar Mechanisms with chains by the aid of computing machines using the Cartesian vectors method, (co-author with I. Gojani and Sh. Buza), Scientific Journal of the Faculty of Mechanical Engineering, Niš, Comparing Simulation of Robot Force/Position Control Models, (co-author with P. Kopacek), 3 rd International Workshop on Robotics in Alpe-Adria Region, pp , Bled, Slovenia, July Contribution to analysis of control task at manipulation systems master-slave, (co-author with I. Gojani), Scientific Journal of the Faculty of Mechanical Engineering, pp.85-92, Prishtina, Comparative Study of Neural Network Controllers for a Constrained Robot Arm, (co-author with P. Kopacek), 4 th International Workshop on Robotics in Alpe- Adria Region, RAA 95, pp , Poertschach, Austria, A Neural Network Scheme for Control a Closed-Chain Multiple Robot System, (co-author with P. Kopacek), 5 th International Workshop on Robotics in Alpe- Adria-Danube Region, RAAD 96, pp , Budapest, Hungary, Application of Neural Networks in Manipulation Systems Control, (coauthor with I. Gojani), Researches 5, Academy of Sciences and Fine Arts of Kosovo, pp , Prishtina, Synthesis of Mechanisms according to geometrical parameters, (co-author with I. Gojani), Machinery Scientific Journal for Theory and Practice in Machinery, Year I, Number 1, pp.17-24, Prishtina, Design and simulation of robots with computers, (co-author with I. Gojani and A. Bunjaku), Machinery Scientific Journal for Theory and Practice in Machinery, Year I, Number 2, pp.29-34, Prishtina, Application of Neural Networks for trajectory tracking of Manipulation Robots, (co-author with I. Gojani and A. Shala), Machinery Scientific Journal for Theory and Practice in Machinery, Year II, Number 1, pp.1-8, Prishtina, Simulations for a Closed Chain Multiple Robot Systems by Application of Neural Network Controllers (co-author with P. Kopacek), Intelligent Assembly and Disassembly IAD 98, pp , Bled, Slovenia, May Using a New Neural Network Teaching Control Scheme for Robot Arm, (co-author with I. Gojani and A. Shala), IEEE International Conference on Intelligent Engineering Systems INES 98, pp , Vienna, Austria, September Application of Neural Network Computing Controllers to Multiple Robotic Systems, Doctoral Thesis, Vienna University of Technology, December Neural Networks for Control of Robotic Systems, (co-author with P. Kopacek), International Journal Automation Austria, Heft 1, pp.18-39, Jg. 7, Control Scheme for Nonholonomic Mobile Manipulators by Using Neural Networks, (co-author with A. Shala and A. Bunjaku) EUROCAST 99, Vienna, Austria, September Velocity and Torque Feedback Control of a Nonholonomic Mobile Robot Using Fuzzy Neural Networks, 6 th IFAC Symposium on Robot Control SYROCO 2000, (co-author with A. Shala and Ag. Pajaziti), pp , Vienna, Austria, September 2000.

8 20. Mobile Robot Navigation using Cognition Models and Genetic Algorithm-Based Approach (co-author with I. Gojani and A. Shala), The 13 th International DAAAM Symposium Intelligent Manufacturing & Automation: Learning from the Nature, pp , Vienna, Austria, October A Fuzzy-Genetic Algorithm and Obstacle Path Generation for Walking Robot (co-author with I. Gojani and A. Shala), IARP Workshop on Robots for Humanitarian Demining, HUDEM 2003, Prishtina, Kosova, June Utilization of Burmester theory in design of planar mechanisms/manipulator (co-author with I. Gojani, B. Pira and P. Marango), IARP Workshop on Robots for Humanitarian Demining, HUDEM 2003, Prishtina, Kosova, June The Use of Burmester Curves in Design of Planar Mechanism/Manipulator On-site IARP Workshop on Robots for Humanitarian Demining, Prishtina, Planning Walking Patterns for a Biped Robot using Fuzzy Logic Controller (co-author with I. Gojani, A. Shala and B. Pira), IARP Workshop on Robots for Humanitarian Demining, HUDEM 2004, Brussels-Leuven, Belgium, June Path-planning and Tracking for a Biped Robot Using Fuzzy Neural Network Optimized with Genetic Algorithm (co-author with I. Gojani, A. Shala and A. Anxhaku), CLAWAR/EURON Workshop on Robots in Entertainment, Leisure and Hobby, Vienna, Austria, December Robots in education process through the robot soccer, Conference of Alb-Science, Tirana, Albania, Optimization of Biped Gait Synthesis using Fuzzy Logic Controller (co-author with P. Kopacek, I. Gojani and A. Shala), American Society of Mechanical Engineering ASME 29 th Mechanisms and Robotics Conference, September 24-28, 2005, Long Beach, California, USA. 28. Kinematics Analysis of Lathe with Copier using the Equivalent Mechanism (co-author with K. Buza, A. Anxhaku, I. Gojani, Sh. Buza), 9 th International Research/Expert Conference - Trends in the Development of Machinery and Associated Technology, TMT 2005, Antalya, Turkey, September, Design of Watt-II Type of Six-Bar Mechanism using Burmester Curves and Inversion Method, The 16 th International DAAAM Symposium Intelligent Manufacturing & Automation: Focus on Young Researches and Scientists, Opatija, Croatia, October Coordination of the Multi Agent System and its Application to Robot Soccer (co-author with P. Kopacek, I. Gojani and G. Shala), IFAC Conference on Supplemental Ways for Improving International Stability Through Automation - ISA '06 June 15-17, 2006, Prishtina, United Nations Mission in Kosovo (UNMIK). 31. General Matrix Model at the second level of Automatic Synthesis Procedure of the Mechanisms (co-author with K. Buza, B. Piraj, I. Gojani, A. Anxhaku), 10 th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, TMT 2006, Barcelona-Lloret de Mar, Spain, September, Design of Stephenson-I Type of Six-Bar Mechanism using Burmester Curves and Inversion Method (co-author with B. Pira, K. Buza, B. Piraj, I. Gojani, A. Anxhaku), 10 th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, TMT 2006, Barcelona-Lloret de Mar, Spain, September, Trajectory Synthesis for a Biped Robot during the Single Support Phase (co-author with I. Gojani, A. Shala and Sh. Buza), the 5 th IFAC Intl. WS DECOM-TT, Cesme, Turkey, May, Synthesis of a Sagittal Gate for a Biped Robot During the Single Support Phase (co-author with I. Gojani, A. Shala, Sh. Buza and G. Capi), 16 th International Symposium on Measurement and Control in Robotics - Warsaw, Poland, June, De-mining techniques of Improvised explosive materials by the usage of Mobile Robots (co-author with J. Berisha, Xh. Bajrami and A. Ajvazi), IARP Workshop on Robots for Humanitarian Demining, HUDEM 2008, Cairo, Egypt, March Robotics in Kosovo, 1 st Kosovo Ireland - Italian - Austrian Automation Day, Automation and Mechatronics June 11, 2008, UBT, Prishtina, Kosovo. 37. Humanitarian Demining in Kosovo, Workshop on Humanitarian Demining Techniques, Radcliffe Institute for Advanced Study, Harvard University, U.S.A., April 3-4, Cost Oriented Robots for Kosovo, (co-author with Sh. Buza, I. Gojani, P. Kopacek and R. Safaric), International Journal Automation Austria, Heft 2, pp.58-67, Jg. 17, November Design of Lathe-Blade Mechanism with Basic Kinematics Blocks Using Methodology of Dual-Vector Algebra, 14th International Research/Expert Conference Trends in the Development of Machining and Associated Technology, TMT 2010, Mediterranean Cruise, September Localization of the Mobile Robot by using the Ultrasonic and Optical Sensors (co-author with Xh.Bajrami), Conference on Engineering and Information Technology, VI Meeting of IAS (Institute of Albanian Science), Prishtina, 1-4 September, 2011.

9 41. Development of the Structure of Use Case and Sequential Diagrams on accomplishing the demands of the Biometric Passports Management System (coauthor with Artan Dermaku and Arianit Pajaziti), Conference on Engineering and Information Technology, VI Meeting of IAS (Institute of Albanian Science), Prishtina, 1-4 September, Design of the Robot Soccer Simulator based on the Fuzzy Logic Theory, Arbnor Pajaziti, Xhevahir Bajrami, Mahir Hasanxhekaj, Journal of Scientific Publications of FECE, KUD , University of Prishtina, Kosovo, V1, page: 11-26, "Algorithm for Mechanisms Design and its Application at Copier-Blade Mechanism using Dual-Vector Algebra in Topological Synthesis", PROCEEDINGS 16th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, TMT 2012, Dubai, AUE, September Design and Implementation of Low-Cost Mobile Robot for Mine Detection, Arbnor Pajaziti, Ka C Cheok, Micho Radonvikovich, Irfan Baftiu, Gentian Godo, Ground Vehicle Systems Engineering and Technology Symposium (GVSETS),Troy, Michigan, U.S.A, Semi-Autonomous Mobile Robot for Mine Detection, Arbnor Pajaziti, Ka C Cheok, Xhevahir Bajrami, The 10 th International Symposium on HUMANITARIAN DEMINING 2013, 23 rd to 25 th April 2013 Šibenik, CROATIA. 46. "Control Algorithm of a Pick and Place Three Dimensional Robots", Fehmi Krasniqi, V. Krasniqi, Sh. Buza, and Arbnor Pajaziti, 15th IFAC symposium on Control, Optimization and Automation in Mining, Minerals and Metal Processing, August 25-28, 2013, Mission Bay, San Diego, California, USA. 47. "Presentation of Eight Basic Kinematic Blocks with Nonlinear Motion Characteristics during Mechanisms Design using Dual Vector Algebra", Kastriot Buza, Ismajl Gojani, Arbnor Pajaziti, Fevzi Radoniqi, PROCEEDINGS of the 17th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, TMT 2013, Istanbul, Turkey, September A study of the influence of implementing the robot programming on student s creativity of high schools, Arbnor Pajaziti, Ramiz Kastrati, 8 TH ANNUAL MEETING OF INSTITUTE ALB-SHKENCA, Tiranë, Gusht "Robotic Arm Control with Neural Networks using Genetic Algorithm Optimization Approach", Arbnor Pajaziti, Hasan Cana, ICERME 2014 : International Conference on Electronics, Robotics and Mechatronics Engineering, Paris, France, August 28-29, SLAM Map building and Navigation via ROS, Arbnor Pajaziti, Petrit Avdullahu, ICAT 14 International Conference on Advanced Technology&Science, August, 2014, Antalya, Turkey. 51. Development and Programming of the Mobile Platform with Manipulation Arm for Rescue Operations, Arbnor Pajaziti, Shaban Buza and Drilon Bunjaku, The 12th International Symposium MINE ACTION 2015, 27rd to 30th April 2015 Biograd, Croatia. 52. Multi-Mode Surround View for ADAS Vehicles, Irfan Baftiu, Arbnor Pajaziti, Ka C Cheok, 2016 IEEE 4th International Symposium on Robotics and Intelligent Sensors, Decem ber 201 6, T ok yo, Japa n. 53. Algorithms of Data Analysis of Automatic Number Plate Recognition System, Arbnor Pajaziti, Gazmend Pula, Ardian Çitaku, The 7 th International Enery Conference & Workshop - REMOO, May 2017, Venice/Italy. 54. Design and Construction of a Modular Cost-Effective CNC Machine, Arbnor Pajaziti, Tafil Asllani, Afrim Gjelaj, 28TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, Path finding for a mobile robot using fuzzy and genetic algorithms, Likaj R., Bajrami X., Shala A., Pajaziti A., International Journal of Mechanical Engineering and Technology (IJMET), Volume 8, Issue 8, August 2017, pp The Design and Control of a Prototype Quadruped Robot, Arbnor Pajaziti, Rinor Berisha, Albion Paliqi, 1 st International Conference: Engineering and Entrepreneurship -ICEE-2017, Tirana, Albania, November Intelligent Control of a Quadruped Robot Through Machine Learning, Arbnor Pajaziti, Rinor Berisha, Albion Paliqi, Week of Science 2018, MEST, Kosovo, May The Role and Importance of the Field of Mechatronics in Industry, Arbnor Pajaziti, The 16 st NETTIES Conference on Access to Knowledge in the 21 st Century, May 2018, Corfu, Greece. 59. Design and Programming of 3D Printed Robotic Hand, Arbnor Pajaziti, Ilir Doçi, Endrit Toplica, Research, Academy of Science and Arts of Kosovo, Volume 23, pp , Prishtina, Path Control of Quadruped Robot through Convolutional Neural Networks, Arbnor Pajaziti, Xhevahir Bajrami, Albion Paliqi, 18th IFAC Conference on Technology, Culture and International Stability, Sept 13-15, 2018, Baku, Azerbaidschan.

10 61. Dynamic Walking Experiments for Humanoid Robot, Arbnor Pajaziti, Xhevahir Bajrami, Ahmet Shala, Ramë Likaj, Intelligent Systems Conference 2018, 6-7 September 2018, London, UK. OTHER ACTIVITIES In 2003 the organizer of International Symposium on Humanitarian Demining HUDEM 2003 organized by the Mechanical Engineering Faculty, University of Prishtina, June The member of Committee of Master and Doctoral Theses for two candidates as well as of several diploma works of the undergraduate students. Worked on the project called Cost Oriented Robots for Manufacturing Automation that has been approved by the Austrian Science and Research Liaison Office, Vienna, Austria. The winner of two months Scholar program (March-April 2009) to teach the Subject Oprimization techniques as well as carried out my research work at the Genova University, Italy, within the EMARO Master program. Invited to participate on the Humanitarian Demining Technologies Workshop, organized by Radcliffe Institute for Advanced Study, Harvard University, on April 3-4, 2009 where I presented two scientific papers regarding the Application of Legged Robots in Humanitarian Demining, as well as the Application of Artificial Intelligence to Robot Control. In March 2010, delivered the course of Medical Information Systems, at the Master Studies Program on Business Administration of the Medical Faculty, University of Prishtina. In June 2010, invited to give the lectures on Subject of Industrial Robots at the Joanneum University of Applied Sciences, in Graz, Austria to the Bachelor students. In July 2010, training about the SPS programming in the Koester Company, Hagen, Germany. In 2014, finished the research work on the Project: Development of the Robot for Recue Operations financed by the Ministry of Science, Education and Technology (MEST), Kosovo, Prishtina. In 2017, finished the research work on the Project: Development of Brain-Machine Interface for Prosthetic Hand, MEST FOR INTERNAL USE ONLY Address: Kodra e Diellit, n.n., 10000, Prishtina, Republic of Kosovo Home Phone: Work Phone: Mobile: Fax: arbnor.pajaziti@uni-pr.edu Prishtina, August 2018