Drilling. Boring. Reaming. Burnishing. Threading. Solid Carbide & Indexable Thread Mills. Specials. AccuThread 856 ThreadMills USA
|
|
- Geoffrey Hensley
- 6 years ago
- Views:
Transcription
1 rilling oring Reaming urnishing Threading Solid arbide & Indexable Thread Mills Specials ccuthread 856 ThreadMills US
2 Threading Solutions Solid arbide and Indexable Thread Mills ccuthread 856 ThreadMills US ny Thread, ny Time llied Machine's thread milling product line has developed in a comprehensive range of high precision oling that offers outstanding productivity with exceptional levels of ol life and thread accuracy. The thread mill range covers both solid carbide and indexable replaceable insert ols with an extensive range of thread forms. Our thread milling product line has been specifically designed provide cusmers with a wide range of options. This is achieved by offering two thread mill ranges within our product lineup: the low cost, general production ThreadMills US range, and the high performance, high productivity ccuthread range. Online programmer available 24/7 pplicable Industries erospace griculture umotive Firearms General Machining Oil & Gas Renewable nergy Tool, Mould & ie Solid carbide and indexable insert styles Medical Large range of thread form options Your safety and the safety of others is very important. This catalogue contains important safety messages. lways read and follow all safety precautions. This triangle is a safety hazard symbol. It alerts you potential safety hazards that can cause ol failure and serious injury. When you see this symbol in the catalogue, look for a related safety message that may be near this triangle or referred in the nearby text. There are safety signal words also used in the catalogue. Safety messages follow these words. WRNING WRNING (shown above) means that failure follow the precautions in this message could result in ol failure and serious injury. NOTI means that failure follow the precautions in this message could result in damage the ol or machine but not result in personal injury. NOT and IMPORTNT are also used. These are important that you read and follow but are not safety-related. Visit for the most up--date information and procedures.
3 Reference Icons The following icons will appear throughout the catalogue help you navigate between products. olt-in Style Inserts Refers the available bolt-in style thread mill insert options olt-in Style Insert Holders Refers the range of holder options available for bolt-in style inserts Pin Style Inserts Refers the available pin style thread mill insert options. Pin Style Insert Holders Refers the range of holder options available for pin style inserts Setup / ssembly Information etailed instructions and information regarding the corresponding part(s) Recommended utting ata Speed and feed recommendations for optimum and safe threading Through oolant Option Indicates that the product has through coolant Threading Solutions ontents Introduction Information Thread Mill Items Overview Online Tools Solid arbide Thread Mills Product Overview Product Nomenclature SW Thread Form SPT Thread Form SPP Thread Form NPT Thread Form NPS Thread Form NPSF Thread Form NPTF Thread Form UN Thread Form ISO Thread Form Indexable Thread Mills Product Overview Product Nomenclature olt-in Style: NPT / NPTF Thread Forms SPT / SPP Thread Forms UN Thread Form UNJ Thread Form ISO Thread Form Holders Pin Style: NPT / NPTF / SPT Thread Forms SPP / PI-ROUN / M Thread Forms UN Thread Form UNJ Thread Form ISO Thread Form Holders Recommended utting ata Pre-rill Information alculations and Recommended Pass hart Solid arbide: ccuthread Solid arbide: ThreadMills US Indexable: ccuthread Programming Guide Troubleshooting Guide : 1
4 Solid arbide and Indexable Thread Mills High Performance Threading Solutions THR MILLING ON RIGHT ORING Solid arbide Thread Mills Notes llied Machine's proprietary M210 coating yields a 25-50% increase in ol life over competir products ccuthread 856 Standard cutting lengths allow for multiple applications without the need for special thread mills Helical flute offers increased strength and rigidity when cutting forces are applied ThreadMills US Helical flute offers increased strength and rigidity when cutting forces are applied High quality for consistent, predictable production Through coolant options available TilN coating improves ol life versus uncoated ols Indexable Insert Thread Mills Notes URNISHING ccuthread 856 olt-in Style Thread mill holders are manufactured from stainless steel that is engineered dampen vibration during operation xtensive range of thread forms with two thread lengths an produce left or right handed threads ccuthread 856 Pin Style ccuthread 856 Indexable Inserts Patented pin style locking system ensures unsurpassed repeatability Thread mill holders are manufactured from stainless steel that is engineered dampen vibration during operation xtensive range of thread forms with two thread lengths Full profiles present on all inserts allow 100% thread form against 65-75% for tapping llied Machine's premium carbide allows for extended ol life while providing high quality thread forms olt-in Style Pin Style llied Machine's proprietary M210 coating yields a 25-50% increase in ol life over competir products : (0) enquiries.eu@alliedmachine.com
5 Solid arbide and Indexable Thread Mills Online Tools Insta-ode Find your thread mill. reate your program. ios VIS NROI VIS P OWNLO ONLIN W PP The user-friendly software lets you choose the best thread mill product for your application and create the program code for your machine. Insta-ode is available across multiple platforms, including the mobile device app, the P download app (that can be used offline), and the online web app available 24/7 at ORING liminate the wait. Get your program now. Insta-ode also has a ycle Time alcular Insta-Quote esign, create, and quote ols in minutes. vailable online 24/7 URNISHING ONLIN W PP Solid arbide Thread Mills (both ccuthread 856 and ThreadMills US) Insta-Quote is the online system that lets you design special oling for your specific application. Receive your drawing and quote within seconds after you complete your design. Now, you can quickly find the exact thread mill you need with Insta-Quote. Go online day and let Insta-Quote help solve your applications. fter all, why should you do all the work? (0) enquiries.eu@alliedmachine.com : 3
6 Solid arbide and Indexable Thread Mills Solid arbide Styles and Thread Forms Thread Forms ccuthread Non-oolant ThreadMills US - Non-oolant ThreadMills US - Through oolant Straight SW Helical SPP, NPS, NPSF, UN, ISO ORING Taper Helical SPT, NPT, NPTF The omplete Package Producing fully finished threaded hydraulic ports has never been easier. The Port and Thread Finishing Kit includes the ccuport 432 port conur cutter with a dedicated ccuthread TM 856 solid carbide thread mill in a single kit. You also receive the T- inserts and port form inserts needed complete the assembly. URNISHING Port kits incorporate the ccuthread TM 856 solid carbide thread mills increase the manufacturing flexibility by allowing threaded hydraulic ports be produced in just two operations. In addition, where a unique port profile is required, llied Machine provides a dedicated special oling solution using our extensive ol design and manufacturing experience meet precise specifications. NOT: See Section 9 of our product catalogue for the complete list of Port and Thread Finishing Kits. One Tool, FOUR Operations Spot Face Port onur Tap rill Spot rill NOT: See Section 92 of our product catalogue for full ccuport 432 product line information. : (0) enquiries.eu@alliedmachine.com
7 Solid arbide and Indexable Thread Mills Product Nomenclature ccuthread 856 Solid arbide Thread Mills TM U K M Thread Mill 2. Thread lass 3. oating 4. Min Thread iameter 5. Thread Pitch 6. Shank TM = Standard U = UN K = M = 1/4 (nglish) 20 = UN 20 TPI M = Metric HTM = Heavy duty N = NPT, NPTF U = Uncoated 0008 = #8 (Number rill) 075 = ISO 0.75 lank = Imperial TW = Weldon flat = SPP, SPT, SW 0450 = M4.5 (ISO) NPT = ll pipe M = ISO threads will show thread form = ccuport specific ORING ThreadMills US Solid arbide Thread Mills TM H M Thread Mill 2. Min Thread iameter 3. Thread Pitch 4. Optional 5. Shank TM = TilN 250 = 1/4 (nglish) 20 = UN 20 TPI H = oolant hole M = Metric TMFT = Uncoated 08 = #8 (Number rill) 075 = ISO 0.75 = ouble end lank = Imperial HTM = Heavy duty 45 = M4.5 (ISO) NPT = ll pipe NPT = ll pipe threads will HTMFT = Heavy duty uncoated threads will show show thread form thread form URNISHING Reference Key Symbol 1 2 ttribute Maximum cutter diameter Shank diameter Overall length Length of cut (0) enquiries.eu@alliedmachine.com : 5
8 SW Solid arbide and Indexable Thread Mills Solid arbide Thread Mills SW Non-oolant R =.137P 55 R =.137P 2 1 SW Non-oolant Thread Mill ORING TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US ccuthread / TM20SWM TMK M 18 5/ TM18SWM TMK M 16 3/ TM16SWM TMK M 14 7/ TM14SWM TMK M 12 1/ TM12SWM TMK M 11 5/ TM11SWM TMK M 10 3/ TM10SWM TMK M 9 7/ TM9SWM TMK0875-9M TM8SWM TMK1000-8M 20 1/ TM20SW / TM18SW / TM16SW / TM14SW / TM12SW / TM11SW / TM10SW - 9 7/ TM9SW TM8SW - URNISHING Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) : (0) enquiries.eu@alliedmachine.com
9 Solid arbide and Indexable Thread Mills SW Solid arbide Thread Mills SW Through oolant R =.137P 55 R =.137P 2 1 SW Through oolant Thread Mill TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US 20 1/ TM20SWHM 18 5/ TM18SWHM 16 3/ TM16SWHM 14 7/ TM14SWHM 12 1/ TM12SWHM 11 5/ TM11SWHM 10 3/ TM10SWHM 9 7/ TM9SWHM TM8SWHM 20 1/ TM20SWH 18 5/ TM18SWH 16 3/ TM16SWH 14 7/ TM14SWH 12 1/ TM12SWH 11 5/ TM11SWH 10 3/ TM10SWH 9 7/ TM9SWH TM8SWH ORING URNISHING Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) (0) enquiries.eu@alliedmachine.com : 7
10 SPT Solid arbide and Indexable Thread Mills Solid arbide Thread Mills SPT R =.137P R =.137P 2 1 SPT Non-oolant Thread Mill ORING TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US ccuthread /16 and 1/ TM28SPTM TMK0063-SPTM 19 1/4 and 3/ TM19SPTM TMK0250-SPTM 14 1/2 and 3/ TM14SPTM TMK0500-SPTM TM11SPTM TMK1000-SPTM 28 1/16 and 1/ TM28SPT /4 and 3/ TM19SPT /2 and 3/ TM14SPT TM11SPT - R =.137P R =.137P 2 1 URNISHING SPT Through oolant Thread Mill TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US 28 1/16 and 1/ TM28SPTHM 19 1/4 and 3/ TM19SPTHM 14 1/2 and 3/ TM14SPTHM TM11SPTHM 28 1/16 and 1/ TM28SPTH 19 1/4 and 3/ TM19SPTH 14 1/2 and 3/ TM14SPTH TM11SPTH Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) : (0) enquiries.eu@alliedmachine.com
11 Solid arbide and Indexable Thread Mills SPP Solid arbide Thread Mills SPP R =.137P 55 R =.137P 2 1 SPP Non-oolant Thread Mill TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US ccuthread /16 and 1/ TM28SPPM TMK0063-SPPM 19 1/4 and 3/ TM19SPPM TMK0250-SPPM 19 3/ HTM19SPPM /2 and 3/ TM14SPPM TMK0500-SPPM 14 3/ HTM14SPPM TM11SPPM TMK1000-SPPM ORING 28 1/16 and 1/ TM28SPP /4 and 3/ TM19SPP /2 and 3/ TM14SPP TM11SPP - R =.137P 55 R =.137P SPP Through oolant 2 Thread Mill 1 URNISHING TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US 28 1/16 and 1/ TM28SPPHM 19 1/4 and 3/ TM19SPPHM 14 1/2 and 3/ TM14SPPHM TM11SPPHM 28 1/16 and 1/ TM28SPPH 19 1/4 and 3/ TM19SPPH 14 1/2 and 3/ TM14SPPH TM11SPPH Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) (0) enquiries.eu@alliedmachine.com : 9
12 NPT Solid arbide and Indexable Thread Mills Solid arbide Thread Mills NPT Non-oolant NPT Non-oolant Thread Mill ORING TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US ccuthread /16 and 1/ TM27NPTM TMNK0063-NPTM 27 1/ HTM27NPTM /4 and 3/ TM18NPTM TMNK0250-NPTM 18 1/4 and 3/ HTM18NPTM /2 and 3/ TM14NPTM TMNK0500-NPTM 14 3/ HTM14NPTM TM11NPTM TMNK1000-NPTM HTM11NPTM / TM8NPTM TMNK2500-NPTM 27 1/16 and 1/ TM27NPT TMNK0063-NPT 27 1/ HTM27NPT HTMNK0125-NPT 18 1/4 and 3/ TM18NPT TMNK0250-NPT 18 1/4 and 3/ HTM18NPT HTMNK0250-NPT 14 1/2 and 3/ TM14NPT TMNK0500-NPT 14 3/ HTM14NPT HTMNK0750-NPT TM11NPT TMNK1000-NPT HTM11NPT HTMNK1000-NPT 8 2-1/ TM8NPT TMNK2500-NPT URNISHING Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) : (0) enquiries.eu@alliedmachine.com
13 Solid arbide and Indexable Thread Mills NPT Solid arbide Thread Mills NPT Through oolant NPT Through oolant Thread Mill TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US 27 1/16 and 1/ TM27NPTHM 27 1/ HTM27NPTHM 18 1/4 and 3/ TM18NPTHM 18 1/4 and 3/ HTM18NPTHM 14 1/2 and 3/ TM14NPTHM 14 3/ HTM14NPTHM TM11NPTHM HTM11NPTHM 8 2-1/ TM8NPTHM 27 1/16 and 1/ TM27NPTH 27 1/ HTM27NPTH 18 1/4 and 3/ TM18NPTH 18 1/4 and 3/ HTM18NPTH 14 1/2 and 3/ TM14NPTH 14 3/ HTM14NPTH TM11NPTH HTM11NPTH 8 2-1/ TM8NPTH ORING URNISHING Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) (0) enquiries.eu@alliedmachine.com : 11
14 NPS Solid arbide and Indexable Thread Mills Solid arbide Thread Mills NPS NPS Non-oolant Thread Mill ORING TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US 27 1/ TM27NPSM 18 1/4 and 3/ TM18NPSM 14 1/2 and 3/ TM14NPSM TM11NPSM 27 1/ TM27NPS 18 1/4 and 3/ TM18NPS 14 1/2 and 3/ TM14NPS TM11NPS URNISHING NPS Through oolant TPI (Pitch) Thread Mill Min Thread Ø Flutes 1 2 ThreadMills US 27 1/ TM27NPSHM 18 1/4 and 3/ TM18NPSHM 14 1/2 and 3/ TM14NPSHM TM11NPSHM 27 1/ TM27NPSH 18 1/4 and 3/ TM18NPSH 14 1/2 and 3/ TM14NPSH TM11NPSH Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) : (0) enquiries.eu@alliedmachine.com
15 Solid arbide and Indexable Thread Mills NPSF Solid arbide Thread Mills NPSF NPSF Non-oolant Thread Mill TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US 27 1/ TM27NPSFM 18 1/4 and 3/ TM18NPSFM 14 1/2 and 3/ TM14NPSFM TM11NPSFM ORING 27 1/ TM27NPSF 18 1/4 and 3/ TM18NPSF 14 1/2 and 3/ TM14NPSF TM11NPSF NPSF Through oolant TPI (Pitch) Thread Mill Min Thread Ø Flutes 1 2 ThreadMills US 27 1/ TM27NPSFHM 18 1/4 and 3/ TM18NPSFHM 14 1/2 and 3/ TM14NPSFHM TM11NPSFHM 27 1/ TM27NPSFH 18 1/4 and 3/ TM18NPSFH 14 1/2 and 3/ TM14NPSFH TM11NPSFH URNISHING Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) (0) enquiries.eu@alliedmachine.com : 13
16 NPTF Solid arbide and Indexable Thread Mills Solid arbide Thread Mills NPTF Non-oolant NPTF Non-oolant Thread Mill ORING TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US ccuthread /16 and 1/ TM27NPTFM TMNK0063-NPTFM 18 1/4 and 3/ TM18NPTFM TMNK0250-NPTFM 14 1/2 and 3/ TM14NPTFM TMNK0500-NPTFM TM11NPTFM TMNK1000-NPTFM 8 2-1/ TM8NPTFM TMNK2500-NPTFM 27 1/16 and 1/ TM27NPTF TMNK0063-NPTF 18 1/4 and 3/ TM18NPTF TMNK0250-NPTF 14 1/2 and 3/ TM14NPTF TMNK0500-NPTF TM11NPTF TMNK1000-NPTF 8 2-1/ TM8NPTF TMNK2500-NPTF URNISHING Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) : (0) enquiries.eu@alliedmachine.com
17 Solid arbide and Indexable Thread Mills NPTF Solid arbide Thread Mills NPTF Through oolant NPTF Through oolant Thread Mill TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US 27 1/16 and 1/ TM27NPTFHM 18 1/4 and 3/ TM18NPTFHM 14 1/2 and 3/ TM14NPTFHM TM11NPTFHM 8 2-1/ TM8NPTFHM ORING 27 1/16 and 1/ TM27NPTFH 18 1/4 and 3/ TM18NPTFH 14 1/2 and 3/ TM14NPTFH TM11NPTFH 8 2-1/ TM8NPTFH URNISHING Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) (0) enquiries.eu@alliedmachine.com : 15
18 UN Solid arbide and Indexable Thread Mills Solid arbide Thread Mills UN Non-oolant 1/4P 60 1/8P 2 1 UN Non-oolant Thread Mill ORING URNISHING TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US ccuthread #2 3* TM08664M TMUK M 56 #2 3* TM08656M TMUK M 48 #3 3* TM09948M TMUK M 44 # TM12544M TMUK M 40 #4 3* TM12540M TMUK M 36 # TM16436M TMUK M 32 # TM13832M TMUK M 32 # TM16432M TMUK M 32 # TM19032M TMUK M 32 1/ TM50032M - 28 # TM19028M TMUK M 28 1/ TM25028M TMUK M 28 7/ TMUK M 28 1/ TM50028M - 24 # TM19024M TMUK M 24 5/ TM31224M TMUK M 24 3/ TM37524M TMUK M 24 1/ TM50024M / TM25020M TMUK M 20 7/ TM43720M TMUK M 20 1/ TM50020M - *Straight fluted Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) : (0) enquiries.eu@alliedmachine.com
19 Solid arbide and Indexable Thread Mills UN Solid arbide Thread Mills UN Non-oolant 1/4P 60 1/8P 2 1 UN Non-oolant Thread Mill TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US ccuthread / TM31218M TMUK M 18 5/ HTM31218M / TM56218M TMUK M 16 3/ TM37516M TMUK M 16 3/ HTM37516M / TM75016M TMUK M 14 7/ TM43714M TMUK M 14 7/ TM87514M TMUK M 13 1/ TM50013M TMUK M 13 1/ HTM50013M / TM56212M TMUK M 12 3/ TM75012M TMUK M TM10012M / TM62511M TMUK M 11 5/ TM62511M-L TMUK LM 10 3/ TM75010M TMUK M 10 3/ TM75010M-L TMUK LM 9 7/ TM87509M TMUK0875-9M 9 7/ TM87509M-L TMUK0875-9LM TM10008M TMUK1000-8M TM10008M-L TMUK1000-8LM 7 1-1/ TM12507M TMUK1125-7M 6 1-3/ TM13706M TMUK1375-6M ORING URNISHING Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) (0) enquiries.eu@alliedmachine.com : 17
20 UN Solid arbide and Indexable Thread Mills Solid arbide Thread Mills UN Non-oolant 1/4P 60 1/8P 2 1 UN Non-oolant Thread Mill ORING URNISHING TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US ccuthread #2 3* TM #2 3* TM08656 TMUK #3 3* TM # TM #4 3* TM12540 TMUK # TM # TM13832 TMUK # TM16432 TMUK # TM19032 TMUK # HTM / TM # TM19028 TMUK / TM25028 TMUK / TM # TM19024 TMUK # HTM / TM31224 TMUK / TM37524 TMUK / TM / TM25020 TMUK / HTM / TM43720 TMUK / TM *Straight fluted Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) : (0) enquiries.eu@alliedmachine.com
21 Solid arbide and Indexable Thread Mills UN Solid arbide Thread Mills UN Non-oolant 1/4P 60 1/8P 2 1 UN Non-oolant Thread Mill TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US ccuthread / TM31218 TMUK / HTM / TM56218 TMUK / TM37516 TMUK / HTM / TM75016 TMUK / TM43714 TMUK / TM87514 TMUK / TM50013 TMUK / HTM / TM56212 TMUK / TM75012 TMUK TM / TM62511 TMUK / TM62511-L TMUK L 10 3/ TM75010 TMUK / TM75010-L TMUK L 9 7/ TM87509 TMUK / TM87509-L TMUK0875-9L TM10008 TMUK TM10008-L TMUK1000-8L 7 1-1/ TM / TM ORING URNISHING Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) (0) enquiries.eu@alliedmachine.com : 19
22 UN Solid arbide and Indexable Thread Mills Solid arbide Thread Mills UN Through oolant 1/4P 60 1/8P 2 1 UN Through oolant Thread Mill ORING TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US 64 #2 3* TM08664HM 56 #2 3* TM08656HM 48 #3 3* TM09948HM 44 # TM12544HM 40 #4 3* TM12540HM 36 # TM16436HM 32 # TM13832HM 32 # TM16432HM 32 # TM19032HM 32 1/ TM50032HM 28 # TM19028HM 28 1/ TM25028HM 28 1/ TM50028HM 24 # TM19024HM 24 5/ TM31224HM 24 3/ TM37524HM 24 1/ TM50024HM 20 1/ TM25020HM 20 7/ TM43720HM 20 1/ TM50020HM *Straight fluted URNISHING Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) : (0) enquiries.eu@alliedmachine.com
23 Solid arbide and Indexable Thread Mills UN Solid arbide Thread Mills UN Through oolant 1/4P 60 1/8P 2 1 UN Through oolant Thread Mill TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US 18 5/ TM31218HM 18 5/ HTM31218HM 18 9/ TM56218HM 16 3/ TM37516HM 16 3/ HTM37516HM 16 3/ TM75016HM 14 7/ TM43714HM 14 7/ TM87514HM 13 1/ TM50013HM 13 1/ HTM50013HM 12 9/ TM56212HM 12 3/ TM75012HM TM10012HM 11 5/ TM62511HM 11 5/ TM62511HM-L 10 3/ TM75010HM 10 3/ TM75010HM-L 9 7/ TM87509HM 9 7/ TM87509HM-L TM10008HM TM10008HM-L 7 1-1/ TM12507HM 6 1-3/ TM13706HM ORING URNISHING Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) (0) enquiries.eu@alliedmachine.com : 21
24 UN Solid arbide and Indexable Thread Mills Solid arbide Thread Mills UN Through oolant 1/4P 60 1/8P 2 1 UN Through oolant Thread Mill ORING URNISHING TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US 64 #2 3* TM08664H 56 #2 3* TM08656H 48 #3 3* TM09948H 44 # TM12544H 40 #4 3* TM12540H 36 # TM16436H 32 # TM13832H 32 # TM16432H 32 # TM19032H 32 1/ TM50032H 28 # TM19028H 28 1/ TM25028H 28 1/ TM50028H 24 # TM19024H 24 5/ TM31224H 24 3/ TM37524H 24 1/ TM50024H 20 1/ TM25020H 20 1/ HTM25020H 20 7/ TM43720H 20 1/ TM50020H *Straight fluted Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) : (0) enquiries.eu@alliedmachine.com
25 Solid arbide and Indexable Thread Mills UN Solid arbide Thread Mills UN Through oolant 1/4P 60 1/8P 2 1 UN Through oolant Thread Mill TPI (Pitch) Min Thread Ø Flutes 1 2 ThreadMills US 18 5/ TM31218H 18 5/ HTM31218H 18 9/ TM56218H 16 3/ TM37516H 16 3/ HTM37516H 16 3/ TM75016H 14 7/ TM43714H 14 7/ TM87514H 13 1/ TM50013H 13 1/ HTM50013H 12 9/ TM56212H 12 3/ TM75012H TM10012H 11 5/ TM62511H 11 5/ TM62511H-L 10 3/ TM75010H 10 3/ TM75010H-L 9 7/ TM87509H 9 7/ TM87509H-L TM10008H TM10008H-L 7 1-1/ TM12507H 6 1-3/ TM13706H ORING URNISHING Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) (0) enquiries.eu@alliedmachine.com : 23
26 ISO Solid arbide and Indexable Thread Mills Solid arbide Thread Mills ISO Non-oolant 1/4P 60 1/8P 2 1 ISO Non-oolant Thread Mill ORING URNISHING Pitch Min Thread Ø Flutes 1 2 ThreadMills US ccuthread M2 3* TM20040M TMMK M 0.45 M2.5 3* TM25045M TMMK M 0.50 M3 3* TM30050M TMMK M 0.50 M TM60050M TMMK M 0.50 M TM10050M TMMK M 0.70 M TM40070M TMMK M 0.75 M TM45075M TMMK M 0.75 M TM60075M TMMK M 0.75 M TM10075M TMMK M 0.80 M TM50080M TMMK M 1.00 M TM60100M TMMK M 1.00 M TM12100M TMMK M 1.25 M TM80125M TMMK M 1.50 M TM10150M TMMK M 1.50 M TM14150M TMMK M 1.50 M TM18150M TMMK M 1.50 M TM20150M M TM12175M TMMK M 2.00 M TM14200M TMMK M 2.00 M TM16200M TMMK M 2.50 M TM20250M TMMK M 3.00 M TM24300M TMMK M 3.50 M TM30350M TMMK M 4.00 M TM36400M TMMK M *Straight fluted Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) : (0) enquiries.eu@alliedmachine.com
27 Solid arbide and Indexable Thread Mills ISO Solid arbide Thread Mills ISO Through oolant 1/4P 60 1/8P 2 1 ISO Through oolant Thread Mill Pitch Min Thread Ø Flutes 1 2 ThreadMills US 0.40 M2 3* TM20040HM 0.45 M2.5 3* TM25045HM 0.50 M3 3* TM30050HM 0.50 M TM60050HM 0.50 M TM10050HM 0.70 M TM40070HM 0.75 M TM45075HM 0.75 M TM60075HM 0.75 M TM10075HM 0.80 M TM50080HM 1.00 M TM60100HM 1.00 M TM12100HM 1.25 M TM80125HM 1.50 M TM10150HM 1.50 M TM14150HM 1.50 M TM18150HM 1.50 M TM20150HM 1.75 M TM12175HM 2.00 M TM14200HM 2.00 M TM16200HM 2.50 M TM20250HM 3.00 M TM24300HM 3.50 M TM30350HM 4.00 M TM36400HM *Straight fluted ORING URNISHING Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) (0) enquiries.eu@alliedmachine.com : 25
28 ISO Solid arbide and Indexable Thread Mills Solid arbide Thread Mills ISO Non-oolant 1/4P 60 1/8P 2 1 ISO Non-oolant Thread Mill ORING URNISHING Pitch Min Thread Ø Flutes 1 2 ThreadMills US ccuthread M2 3* TM M2.5 3* TM M3 3* TM M TM M TM M TM M TM45075 TMMK M TM80075 TMMK M TM M TM50080 TMMK M TM60100 TMMK M TM12100 TMMK M TM80125 TMMK M TM10150 TMMK M TM14150 TMMK M TM18150 TMMK M TM M TM12175 TMMK M TM M TM16200 TMMK M TM20250 TMMK M TM24300 TMMK M TM M TM *Straight fluted Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) : (0) enquiries.eu@alliedmachine.com
29 Solid arbide and Indexable Thread Mills ISO Solid arbide Thread Mills ISO Through oolant 1/4P 60 1/8P 2 1 ISO Through oolant Thread Mill Pitch Min Thread Ø Flutes 1 2 ThreadMills US 0.40 M2 3* TM20040H 0.45 M2.5 3* TM25045H 0.50 M3 3* TM30050H 0.50 M TM60050H 0.50 M TM10050H 0.70 M TM40070H 0.75 M TM45075H 0.75 M TM80075H 0.75 M TM10075H 0.80 M TM50080H 1.00 M TM60100H 1.00 M TM12100H 1.25 M TM80125H 1.50 M TM10150H 1.50 M TM14150H 1.50 M TM18150H 1.50 M TM20150H 1.75 M TM12175H 2.00 M TM14200H 2.00 M TM16200H 2.50 M TM20250H 3.00 M TM24300H 3.50 M TM30350H 4.00 M TM36400H *Straight fluted ORING URNISHING Key on : 1 : : 4 Weldon Flat To order a thread mill with a Weldon flat, replace the leading TM designar with TW (available for metric shanks 6mm and above, or imperial shanks 3/8 and above) xample: ylindrical shank = TMNK0500-NPT Weldon shank flat = TWNK0500-NPT NOT: Weldon flats have a minimum order quantity of 2 pieces = Metric (mm = Imperial (in) (0) enquiries.eu@alliedmachine.com : 27
30 Solid arbide and Indexable Thread Mills Indexable Insert Thread Mills Overview olt-in Style Replaceable inserts allow for quick set-ups and ol changes keep the production process moving smoothly Inserts are available with M210 coating, which increases ol life vailable with 1 flute only Multiple thread form styles are available Tapered thread forms: NPT, NPTF, SPT Straight thread forms: SPP, UN, UNJ, ISO olt-in Style Indexable Thread Mill ssembly ORING Step 1: Slide the thread mill insert in the insert holder slot. Step 2: Tighten the screws hold the insert in place. URNISHING Pin Style Replaceable inserts allow for quick set-ups and ol changes keep the production process moving smoothly Inserts are available with M210 coating, which increases ol life Holders available in 2 styles: Weldon Shank and Shell Mill Weldon Shank holders available with 1, 2, 3, and 5 flutes Shell Mill holders available with 6, 7, and 8 flutes Thread forms available: NPT, NPTF, SPT, SPP, PI-ROUN, M, UN, UNJ, ISO Pin Style Indexable Thread Mill ssembly Step 1: Slide the thread mill insert in the insert holder slot. Step 2: Slide the pin in the pin holder slot hold the insert in place. Step 3: Tighten the screws hold both the insert and pin in place. : (0) enquiries.eu@alliedmachine.com
31 Solid arbide and Indexable Thread Mills Product Nomenclature ccuthread 856 Indexable Inserts TP 075 K - UN 32 I olt-in Style Pin Style 1. Insert Style 2. Insert Length 3. oating 4. Thread lass 5. Thread Pitch 6. Thread Style TP = olt-in 075 = mm K = M210 UN = UN SPT = SPT 20 = UN I = TN = Pin style 100 = mm = TilN UNJ = UNJ M = ISO 1.0 = ISO = 150 = mm U = Uncoated NPT = NPT F = Full M NPTF = NPTF P = PI Round SPP = SPP Indexable Inserts Symbol ttribute Length of insert T 1 Insert thickness T 1 ORING ccuthread 856 Indexable Insert Holders THT F 075 M Holder Style olt-in Style Pin Style THT = Tapered Head THP = Weldon Positive Rake THN = Straight Head TNR = Weldon Neutral Rake TSN = Shell Mill Positive Rake TSR = Shell Mill Neutral Rake 2. Length of Insert 3. Shank esignation 0400 = F = 1 flute 6F = 6 flutes 2F = 2 flutes 7F = 7 flutes 3F = 3 flutes 8F = 8 flutes 5F = 5 flutes olt-in Style Holders Symbol ttribute Symbol ttribute 1 Maximum cutter diameter Overall length 2 Shank diameter Length of insert 3 Pilot diameter 2 L URNISHING 4. Length of Insert 5. Shank esignation 075 = mm M = Metric 100 = mm lank = Imperial 150 = mm Pin Style Holders Symbol ttribute Symbol ttribute 1 utter diameter 5 ore diameter (Shell Mill) 1 * Oversized cutter diameter Overall length 2 Shank diameter Length of insert 3 Pilot diameter L 8 Flute length 4 ody diameter (Shell Mill) T 2 Slot width (Shell Mill) (0) enquiries.eu@alliedmachine.com : 29
32 I Solid arbide and Indexable Thread Mills ccuthread 856 Thread Mill Inserts olt-in Style NPT / NPTF T NPT / Insert ORING TPI (Pitch) mm inch T 1 mm T 1 inch NPT / TP075K-NPT TP100K-NPT T 1 NPTF / TPI (Pitch) Insert mm inch T 1 mm T 1 inch NPTF / TP075K-NPTF TP100K-NPTF14 URNISHING Key on : 1 : : 28 : 35 Inserts sold in quantities of 2 : (0) enquiries.eu@alliedmachine.com
33 Solid arbide and Indexable Thread Mills I ccuthread 856 Thread Mill Inserts olt-in Style SPT / SPP R =.137P R =.137P SPT / T 1 mm T 1 Insert TPI (Pitch) mm inch T 1 mm T 1 inch SPT / TP075K-SPT TP100K-SPT TP100K-SPT14 ORING T 1 1/4P 60 SPP / 1/8P TPI (Pitch) Insert mm inch T 1 mm T 1 inch SPP / TP075K-SPP TP100K-SPP TP100K-SPP14 URNISHING Key on : 1 : : 28 : 35 Inserts sold in quantities of (0) enquiries.eu@alliedmachine.com : 31
34 I Solid arbide and Indexable Thread Mills ccuthread 856 Thread Mill Inserts olt-in Style UN 1/4P 60 UN T 1 1/8P Insert ORING TPI (Pitch) mm inch T 1 mm T 1 inch UN TP075K-UN32I TP100K-UN32I TP075K-UN24I TP100K-UN24I TP075K-UN20I TP100K-UN20I TP075K-UN18I TP100K-UN18I TP075K-UN16I TP100K-UN16I TP100K-UN14I TP100K-UN13I TP100K-UN12I 10* TP100K-UN10I *This item is only used with THN F100 or THN F100M. The reduced body allows a 3/4"-10 UN/UNJ be produced. T 1 1/4P 60 UN 1/8P URNISHING TPI (Pitch) Insert mm inch T 1 mm T 1 inch UN TP075K-UN TP100K-UN TP075K-UN TP100K-UN TP075K-UN TP100K-UN TP075K-UN TP100K-UN TP075K-UN TP100K-UN TP100K-UN TP100K-UN TP100K-UN12 10* TP100K-UN10 *This item is only used with THN F100 or THN F100M. The reduced body allows a 3/4"-10 UN/UNJ be produced. Key on : 1 : : 28 : 35 Inserts sold in quantities of 2 : (0) enquiries.eu@alliedmachine.com
35 ccuthread 856 Thread Mill Inserts olt-in Style UNJ 1/4P 60 UNJ Solid arbide and Indexable Thread Mills T 1 I 1/8P Insert TPI (Pitch) mm inch T 1 mm T 1 inch UNJ TP075K-UNJ32I TP100K-UNJ32I TP075K-UNJ24I TP100K-UNJ24I TP075K-UNJ20I TP100K-UNJ20I TP075K-UNJ18I TP100K-UNJ18I TP075K-UNJ16I TP100K-UNJ16I TP100K-UNJ14I TP100K-UNJ12I 10* TP100K-UNJ10I *This item is only used with THN F100 or THN F100M. The reduced body allows a 3/4"-10 UN/UNJ be produced. 1/4P 60 UNJ T 1 ORING 1/8P TPI (Pitch) Insert mm inch T 1 mm T 1 inch UNJ TP075K-UNJ TP100K-UNJ TP075K-UNJ TP100K-UNJ TP075K-UNJ TP100K-UNJ TP075K-UNJ TP100K-UNJ TP075K-UNJ TP100K-UNJ TP100K-UNJ12 URNISHING Key on : 1 : : 28 : 35 Inserts sold in quantities of (0) enquiries.eu@alliedmachine.com : 33
36 I Solid arbide and Indexable Thread Mills ccuthread 856 Thread Mill Inserts olt-in Style ISO 1/4P 60 ISO T 1 1/8P Insert ORING Pitch mm inch T 1 mm T 1 inch ISO TP075K-M0.5I TP075K-M1.0I TP100K-M1.0I TP075K-M1.25I TP075K-M1.5I TP100K-M1.5I TP100K-M2.0I T 1 1/4P 60 ISO 1/8P URNISHING Pitch Insert mm inch T 1 mm T 1 inch ISO TP100K-M TP100K-M TP100K-M2.0 Key on : 1 : : 28 : 35 Inserts sold in quantities of 2 : (0) enquiries.eu@alliedmachine.com
37 Solid arbide and Indexable Thread Mills I ccuthread 856 Thread Mill Insert Holders olt-in Style Tapered Insert Holders NPT / NPTF / SPT Holder Flutes Inserts Screw river THT F075M TP075K... TMS-250 8T THT F100M TP100K... TMS-45 8T-9 ORING THT F075 TP075K... TMS-250 8T THT F100 TP100K... TMS-45 8T Straight Insert Holders SPP / UN / UNJ / ISO Holder Flutes Inserts Screw river THN F075M TP075K... TMS-250 8T THN F100M TP100K... TMS-40 8T THN F075 TP075K... TMS-250 8T THN F100 TP100K... TMS-40 8T THN F100 TP100K... TMS-40 8T-9 URNISHING Key on : 1 : 28 : = Metric (mm = Imperial (in) (0) enquiries.eu@alliedmachine.com : 35
38 I Solid arbide and Indexable Thread Mills ccuthread 856 Thread Mill Inserts Pin Style NPT / NPTF / SPT T NPT / Insert ORING TPI (Pitch) mm inch T 1 mm T 1 inch NPT / TN150K-NPT TN150K-NPT8 T 1 NPTF / TPI (Pitch) Insert mm inch T 1 mm T 1 inch NPTF / TN150K-NPTF TN150K-NPTF8 T 1 URNISHING R =.137P R =.137P 1 47 SPT / Insert TPI (Pitch) mm inch T 1 mm T 1 inch SPT / TN150K-SPT11 Key on : 1 : : 28 : Inserts sold in quantities of 2 : (0) enquiries.eu@alliedmachine.com
39 ccuthread 856 Thread Mill Inserts Pin Style SPP / PI-ROUN / M Solid arbide and Indexable Thread Mills T 1 I R =.137P 55 SPP / R =.137P Insert TPI (Pitch) mm inch T 1 mm T 1 inch SPP / TN150K-SPP11 T 1 ORING h PI-ROUN / TPI (Pitch) Insert inch mm T 1 inch T 1 mm PI-ROUN / TN150K-P TN150K-P8 T 1 29 M Full Profile URNISHING Insert TPI (Pitch) mm inch T 1 mm T 1 inch M Full Profile TN100K-F TN150K-F TN100K-F TN150K-F TN100K-F TN150K-F TN150K-F TN150K-F5 Key on : 1 : : 28 : Inserts sold in quantities of (0) enquiries.eu@alliedmachine.com : 37
40 I Solid arbide and Indexable Thread Mills ccuthread 856 Thread Mill Inserts Pin Style UN T 1 1/4P 60 UN 1/8P Insert ORING TPI (Pitch) mm inch T 1 mm T 1 inch UN TN100K-UN32I TN100K-UN24I TN150K-UN24I TN100K-UN20I TN150K-UN20I TN100K-UN18I TN150K-UN18I TN100K-UN16I TN150K-UN16I TN150K-UN14I TN100K-UN12I TN150K-UN12I TN100K-UN10I TN150K-UN10I TN100K-UN8I TN150K-UN8I TN100K-UN7I TN150K-UN7I TN150K-UN6I URNISHING Key on : 1 : : 28 : Inserts sold in quantities of 2 : (0) enquiries.eu@alliedmachine.com
41 ccuthread 856 Thread Mill Inserts Pin Style UN Solid arbide and Indexable Thread Mills T 1 I 1/4P 60 UN 1/8P Insert TPI (Pitch) mm inch T 1 mm T 1 inch UN TN100K-UN TN100K-UN TN150K-UN TN100K-UN TN150K-UN TN100K-UN TN150K-UN TN100K-UN TN150K-UN TN100K-UN TN150K-UN TN100K-UN TN150K-UN TN100K-UN TN150K-UN TN150K-UN6 ORING URNISHING Key on : 1 : : 28 : Inserts sold in quantities of (0) enquiries.eu@alliedmachine.com : 39
42 I Solid arbide and Indexable Thread Mills ccuthread 856 Thread Mill Inserts Pin Style UNJ T 1 5/16P R max P R min P 60 UNJ Insert ORING TPI (Pitch) mm inch T 1 mm T 1 inch UNJ TN100K-UNJ32I TN100K-UNJ24I TN150K-UNJ24I TN100K-UNJ20I TN150K-UNJ20I TN100K-UNJ18I TN150K-UNJ18I TN100K-UNJ16I TN150K-UNJ16I TN100K-UNJ12I TN150K-UNJ12I TN150K-UNJ8I 5/16P 60 UNJ T 1 R max P R min P Insert URNISHING TPI (Pitch) mm inch T 1 mm T 1 inch UNJ TN100K-UNJ TN100K-UNJ TN150K-UNJ TN100K-UNJ TN150K-UNJ TN100K-UNJ TN150K-UNJ TN100K-UNJ TN150K-UNJ TN100K-UNJ TN150K-UNJ TN150K-UNJ8 Key on : 1 : : 28 : Inserts sold in quantities of 2 : (0) enquiries.eu@alliedmachine.com
43 ccuthread 856 Thread Mill Inserts Pin Style ISO Solid arbide and Indexable Thread Mills T 1 I 1/4P 60 ISO 1/8P Insert Pitch mm inch T 1 mm T 1 inch ISO TN150K-M1.5I TN150K-M2.0I TN150K-M2.5I TN150K-M3.0I TN150K-M3.5I TN150K-M4.0I TN150K-M4.5I TN150K-M5.0I TN150K-M6.0I ORING 1/4P 60 ISO T 1 1/8P Insert Pitch mm inch T 1 mm T 1 inch ISO TN150K-M TN150K-M TN150K-M TN150K-M TN150K-M6.0 URNISHING Key on : 1 : : 28 : Inserts sold in quantities of (0) enquiries.eu@alliedmachine.com : 41
44 I Solid arbide and Indexable Thread Mills ccuthread Pin Style Holders Weldon Shank L Positive Rake 1 Holder ORING Standard Ovesize* 3 L 8 2 oolant Flutes Inserts Screw Key Size Pin N 2 THP F100M TN100K... TMSS-3 3/32 TMP Y 5 THP F100M TN100K... TMSS-2 3/32 TMP N 1 THP F150M TN150K... TMSS-2 3/32 TMP N 2 THP F150M TN150K... TMSS-3 3/32 TMP Y 3 THP F150M TN150K... TMSS-3 3/32 TMP Y 5 THP F150M TN150K... TMSS-2 3/32 TMP N 2 THP F100 TN100K... TMSS-3 3/32 TMP Y 5 THP F100 TN100K... TMSS-2 3/32 TMP N 1 THP F150 TN150K... TMSS-2 3/32 TMP N 2 THP F150 TN150K... TMSS-3 3/32 TMP Y 3 THP F150 TN150K... TMSS-3 3/32 TMP Y 5 THP F150 TN150K... TMSS-2 3/32 TMP-2 *See note at botm of page Neutral Rake 1 Holder URNISHING Standard Ovesize* 3 L 8 2 oolant Flutes Inserts Screw Key Size Pin Y 3 TNR F150M TN150K... TMSS-3 3/32 TMP Y 5 TNR F150M TN150K... TMSS-2 3/32 TMP Y 3 TNR F150 TN150K... TMSS-3 3/32 TMP Y 5 TNR F150 TN150K... TMSS-2 3/32 TMP-2 *See note at botm of page Key on : 1 : 28 : *Oversized cutter diameter occurs when assembled with the following pin style inserts: NPT 8 NPTF 11.5 NPTF 8 PI 8 Metric 6.0 Metric 5.0 Metric 4.5 M 5 M 6 = Metric (mm = Imperial (in) : (0) enquiries.eu@alliedmachine.com
45 Solid arbide and Indexable Thread Mills I ccuthread Pin Style Holders Shell Mill T 2 Positive Rake 1 Holder Standard Ovesize* 4 5 T 2 Flutes Inserts Screw Key Size Pin TSN F150M TN150K... TMSS-2 3/32 TMP TSN F150M TN150K... TMSS-2 3/32 TMP-2 ORING TSN F150 TN150K... TMSS-2 3/32 TMP TSN F150 TN150K... TMSS-2 3/32 TMP-2 *See note at botm of page Neutral Rake 1 Holder Standard Ovesize* 4 5 T 2 Flutes Inserts Screw Key Size Pin TSR F150M TN150K... TMSS-2 3/32 TMP TSR F150 TN150K... TMSS-2 3/32 TMP-2 *See note at botm of page URNISHING Key on : 1 : 28 : *Oversized cutter diameter occurs when assembled with the following pin style inserts: NPT 8 NPTF 11.5 NPTF 8 PI 8 Metric 6.0 Metric 5.0 Metric 4.5 M 5 M 6 = Metric (mm = Imperial (in) (0) enquiries.eu@alliedmachine.com : 43
Swagelok Thermoplastic Hose Hand Swager User s Manual
Swagelok Thermoplastic Hose Hand Swager User s Manual Thermoplastic Hose Hand Swager User s Manual Contents Hand Swager Components....................... 2 Setup Swager.......................................
More informationHANDWHEELS.
HANDWHEELS 5 Handwheels Aluminum Angular Solid Handwheel...5.2 Aluminum Angular Spoked Handwheel... 5.2 Aluminum Finger Wheel... 5.10 Cast Angular Spoked Handwheel... 5.3 Cast Iron Angular Spoked Handwheel...
More informationFarm Hardware. Farm Hardware. To order call: Fax:
1 Weather aps lear zinc plated steel. Single bolt installation, silencer block, heat resistant rivets and bushings. Weather aps Muffler lamps Stroke ontrol FITS PIPE DIMETER 11200 1-1/2 1-11/16 11201 1-3/4
More informationTUCSON PATIO AWNING INSTALLATION MANUAL
TUCSON PATIO AWNING INSTALLATION MANUAL Toll Free 877-792-1775 Fax 877-792-0031 swsuncontrolpro.com sales@swsuncontrol.com 1 INTRODUCTION...3 1.1 Symbols used in this manual... 3 1.2 Personnel requirements...
More informationFor full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
R Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 6-5480 www.cmafh.com Safety Interlock Switches TL19 Safety Interlock Switch with uard Door Locking High
More informationCATALOG NOMENCLATURE
CATALOG NOMENCLATURE FIRST ALPHA CHARACTER THIRD ALPHA CHARACTER OVERALL LENGTH L POINT OR BUTTON HOLE SIZES CUSTOM SBR LENGTH, STANDARD ALTERATIONS OR UNIVERSAL SHAPE CODE X MHO 25-090 C P= W=, EXTENDED
More informationPINS & BUSHINGS INCH
www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH Steel, Bronze & Self-Lubricating Friction & Ball Bearing Components www.danly.com PINS & BUSHINGS INCH Strategically located to serve
More informationSouthco 64 Push-to-Close Latch Visible, Locking, Slide Bolt
Southco 64 Push-to-Close Latch, Locking, Slide olt 139.7 (5.50) 10.2 (.40) 108 (4.25) 4X Ø H RIVET LTCHES ONLY 22.6 (.89) Push-to-Close Latches 1.2 (.05) 45.1 (1.78) NON-LOCKING LOCKING* 23.4 (.92) TYPE
More informationFlute Type. Max Drill Depth L1. Lth L2
olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Flute illustrated L3 Available Ex-Stock older Reference Number Flute Type older Type Drill Range D Max Drill Depth L1 Flute
More information2016 PRODUCTS & PRICES
2016 PRODUCTS & PRICES LENGTH STOPS THAT ARE USER FRIENDLY Orders 1-800-821-3491 Phone 1-717-484-0230 Fax 1-717-484-0933 E-mail mayaposi@att.net Web mayaposi-stop.com MAYA POSITIONING EQUIPMENT MFG CO.
More informationBUILT-IN OVEN SAFETY
UILT-IN OVN SFTY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. lways read and obey all safety messages.
More informationFALL PRO TOOLS. Measure, Level, Cut and SAVE NOW! 2018 PROMO Ask your distributor for details! Jobsite Tools Hole Saws Recip Blades
FALL PRO TOOLS 2018 PROMO Ask your distributor for details! The Pro s Tool of Choice. Measure, Level, Cut and SAVE NOW! Jobsite Tools Hole Saws Recip Blades Sale runs through November 30, 2018 SAVE UP
More informationINDEX CUTTERS & HD KNIVES HOBBY KNIVES TUBE CUTTERS SCRAPERS GLASS CUTTERS SPARE BLADES SCISSORS TILE CUTTERS HEAVY DUTY SCISSORS TAP & DIE SETS
CUTTING INDEX CUTTERS & HD KNIVES HOBBY KNIVES KRT000200 KRT000201 KRT000202 KRT000203 KRT000204 KRT001201 KRT000602 KRT000901 KRT000205 KRT000206 KRT000300 KRT000301 KRT000302 KRT000902 KRT000903 KRT000904
More informationSafe - Spirals Protection for Hydraulic hoses
Safeplast NA Company, Ltd. Safe - Spirals Protection for Hydraulic hoses Safeplast hose protectors provide safe and economic protection of hydraulic and pneumatic hoses thereby reducing machine downtime
More informationREAD ME FIRST! IMPORTANT WARNING! ENG. Roof top tent
Roof top tent ENG TENT031 220 min READ ME FIRST! Thank you for purchasing a Front Runner Roof Top Tent. Before you start, take a moment to familiarize yourself with these Fitting Instructions and the components
More informationREAD ME! IMPORTANT WARNING! ENG. Quick Release Tent Mount Kit
Quick Release Tent Mount Kit ENG TBMK008 READ ME! Thank you for purchasing a Front Runner Quick Release Tent Mount Kit. Before you start, take a moment to familiarize yourself with the Fitting Instructions
More informationNotes, Parts List & Drawings
Biomass Chopper/Cutter Notes, Parts List & Drawings Page 1 of 16 The Easy BioChop biomass chopper/cutter was designed to cut both wet and dry biomass and to accomplish a number of goals. The objectives
More informationTRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH
www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH www.danly.com PINS & BUSHINGS INCH Service We Deliver and Quality You Can Depend On DANLY IEM is a leading manufacturer of die sets and
More informationCouplings for Gates Hoses 7 Combination Nipple
Supersedes 1 Long Shank Couplings for Gates Hoses 7 Combination Nipple Description: Cast brass, serrated shank, set has hex male and hex swivel female couplings, with a washer seal. Threads are GHT or
More informationSafety Interlock Switches
r Safety Interlock Switches TL19 TL19 Safety Interlock Switch with uard Door Locking High locking force of 10 N (270 lb.) locks guard door shut until machine is safe to enter IP67 (NEMA 6) enclosure enables
More informationMaster Catalog 175
ALAN TOOLHOLRS LIV NTRS LATH HUKS KINGSTON: ALAN to 12,000 rpm @ g6.3 SPIN TRU: ALAN to 20,000 rpm @ g2.5 Manufactured to ISO9002 quality control standards ertification included with each holder rafted
More informationSERVICE PARTS LIST AND ASSEMBLY INSTRUCTIONS
R Transport Air Conditioning FlexCLIK 58-64105-03 #12 [16MM], 35 Bar, SAE J2064 Type E FlexCLIK 58-64105-02 #10 [13MM], 35 Bar, SAE J2064 Type E FlexCLIK 58-64105-01 #8 [10MM], 35 Bar, SAE J2064 Type E
More informationHANDLES, LE VERS & CR ANKS
Handles, Levers & Cranks Plastic Pull/Lift Handle...112 Plastic Revolving Fold-Away Handle... 95 Plastic Revolving Heavy Duty Handle With Steel Shank... 92 Plastic Revolving Handle With Steel Through Shank...
More informationSteel Flareless Ermeto Connectors
Ermeto onnectors PPITIO T Typical pplication: Hydraulic, instrumentation and chemical processing. Highly recommended for high pressure and high vibration applications. Tube O.. 1/8 3/16 1/4 5/16 3/8 1/2
More informationTOOLING COMPONENTS. tel fax Clamping Kits Step Blocks...7. Driver Studs...
Clamping Kits... 2-8 Step Blocks...7 Driver Studs... 9-13 Bolts, Screws... 14-20 Nuts, Washers... 21-29 Sex Bolts... 30-31 Clamps... 32-44 Screws... 45-49 Knobs & Levers... 49-53 Rest Pads...54 Index Plungers...
More informationSECTION I-1. Type: 1812-AC. Fuel: Air-Gas.
RADIANT LINE BURNER. SECTION I-1. Type: 1812-AC. Manufactured from a heat resisting cast alloy with a ceramic front face, this radiant burner type is ideally suited for use in Infrared Heating production
More informationZPS BALL LOCK QUICK CHANGE FIX TURING. Ball Lock Mounting System (Inch) Zero Point Mounting System. Ball Lock Mounting System (Metric)
QUICK CHANGE FIXTURING M O U NTIN G SYS TEM Ball Lock Mounting System (Inch) Ball Lock for Rotary Indexers...19 Ball Lock Accessories... Ball Lock Selector Guides... 27 Commonly Asked Questions About the
More informationCloset and Specialty Hardware
Closet and Specialty Hardware Door & Mirror Hardware...108 Magnetic and Bullet Catches... 108 Sliding Door Pulls........................................ 108 Mirror Clips/Glass Clips, Fittings and Latches...
More informationSEMS FASTENERS PRODUCT GUIDE. Your added value solution provider. You ve probably flown with our fasteners. Engineered solutions
SEMS FASTENERS PRODUCT GUIDE Your added value solution provider You ve probably flown with our fasteners Elite suppliers to the Motorsport industry Engineered solutions Metric SEMS Product Type & Material
More informationSafe - Spirals Protection for Hydraulic hoses
Safeplast NA Company, Ltd. Safe - Spirals Protection for Hydraulic hoses Safeplast hose protectors provide safe and economic protection of hydraulic and pneumatic hoses thereby reducing machine downtime
More informationRecoil Brand Products. Threaded Inserts,Taps,Tooling & Kits
Recoil Brand Products Threaded Inserts,Taps,Tooling & Kits 1 Contents Features Installed with standard drills and taps Easy installation May be used in many materials; aluminum, magnesium, and cold rolled
More informationHose Fitting Selection Chart
LOW/MEIUM Hose Fitting Selection hart PERMNENT REUSLE SERIES SERIES N SH SIZE RNGE* Zinc Plated Steel 903 3630 (-03 to -12), 3R30, 3130, 37L, 3800, 3840, 3580, 3440 (-04 to -08), 30T (-04 to-08) 90H 3630
More information4-foot Economy Sign Post. 4-foot post is rated at 2 pounds per foot. 7-foot Economy Sign Post
Introduction: ComplianceSigns.com offers a variety of sign posts, sign mounting hardware, sign bases, mounting tape and more to mount your safety signs indoors or out. We offer three styles of sign posts,
More informationNEW PRODUCTS 6-7 HEAVY DUTY
deburring system NEW PRODUCTS 6-7 HEAVY DUTY (ø3.2mm) 8-9 NOGA BURR 3 NOGA BURR 5 SUPER BURR EDGE OFF RAPID BURR NOGAGRIP HANDLE NOGAGRIP 3 HANDLE S HOLDER S BLADES Holes Straight Edge Deep Holes Curved
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS KR54, KR1654, & KR4954 Keyed Removable Mullion NOT FOR USE ON ELECTRIC OR FIRE RATED MULLIONS. This kit includes the following parts: (Not to scale) WARNING Remove key, reinstall,
More informationWORKHOLDING COMPONENTS
Adjustable Clamp Heels... 274 Adjustable Clamp Rests...273 Adjustable Step Blocks...284 Assemblies, Spherical Flange...260 Bolts, Dovetail...258 Bolts, Swing... 241 Bolts, T...258 Bolts, T-Slot...257 Bolts,
More informationTN5000 Titan Manual Rotary Microtome
User Manual TN5000 Titan Manual Rotary Microtome Read Prior to Operation! Always keep this manual near the unit! WP47617 06.02.15 User Manual TN5500: Titan 888.708.5233 Info@TannerScientific.com www.tannerscientific.com
More informationSpecifications. According to CEC Rule Please Note
T& Fittings rmoured able and Flexible Metal onduit Fittings Specifications rmoured able (Type 90) Ref. E Rule 12-600 The anadian Electric ode 2012 Part I defines type armoured cable as, fabricated assembly
More informationAuxiliary 63.5l Fuel Tank Ford/Mazda Pick-up Truck 2012-Current READ ME! IMPORTANT WARNING!
Auxiliary 63.5l Fuel Tank Ford/Mazda Pick-up Truck 2012-Current ENG FTFM006 90 min READ ME! Thank you for purchasing a Front Runner Ford/Mazda Pick-Up Truck 2012 - Current Fuel Tank. Before you start,
More informationRound Die Products www.anchorlamina.com Check our website for the latest technical information. 1 BUSHINGS General Information Bushings... 2 & 3 STANDARD SHOULDER BUSHINGS Bronze Plated & Solid Steel...
More informationn FixtureBuilder is a 3D fixture modeling software that creates R&R setups for documenting and off-line programming. See page 22.
Ability To Inspect Every Detail Many times with traditional fixturing, features can be obstructed from the probe path due to cumbersome and bulky fixturing. With the R&R Fixture, various component and
More informationHose Assembly Equipment
atalog 4400 US ittings rimping -1 Products ivision atalog 4400 US Visual Index Model No. 339 & 239 - ut-off Machine Model No. 332T-115V - ut-off Machine Model No. 631075 - Karrykut ut-off Machine TH8-400
More informationAviation Snips. Multi-Cable Cutter
CUTTING tools Aviation Snips 0653-01L Drop-forged, chrome-moly steel blades with serrated edges. Includes left, right and straight-cut versions with color coded grips green (right), yellow (straight),
More informationA A A T E C H N O L O G Y
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. H A R D W A R E C A T A L O G TOTAL SOLUTION SERVICE For the Industrial Piping Marketplace 2011 www.aaatech.com 4 0 Y E A R S S E R V I N G I N D U S T
More informationFormulate Designer Series 10 Backwall - Kit 01
Formulate Designer Series 10 Backwall - Kit 01 FMLT-DS-10-01 Formulate TM Designer Series 10ft displays have unique stylistic features and shapes, are portable and easy to assemble. The aluminum tube frame
More informationSKU Product Name Price American Underslung
Classic & Exotic Service, Inc. 2032 Heide, Troy MI 48084 USA Phone: 1.248.269.9414 E-mail: Parts@classicandexotic.com WWW: http://www.classicandexotic.com SKU Product Name Price American Underslung MISC-0359
More informationFor full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
R Safety Interlock Switches TL4024 Safety Interlock Switch with uard Door Locking High locking force of 1,500 N (7 lb.) locks guard door shut until machine is safe to enter IP67 (NEMA 6) enclosure withstands
More informationLevels & Measuring Tools
Levels & Measuring Tools Quick, easy and accurate measurements can mean the difference between a job well done and one that misses the mark. Klein offers a variety of levels and other measuring devices
More informationINSTRUCTIONS INSTALLATION UNIVERSAL SERIES PATIO AWNING HARDWARE , , ,
RECORD THIS INFORMATION FOR FUTURE REFERENCE: Model Number Serial Number Hardware Model Number Hardware Serial Number Date Purchased Retailer / Qualified Installer INSTALLATION INSTRUCTIONS UNIVERSAL SERIES
More informationS405 Barbecue Assembly Manual
S405 arbecue ssembly Manual 85-02-6 (G4705) Propane Year limited Warranty Read and save manual for future reference. If pre-assembled, leave this manual with unit for consumer s future reference. For product
More informationTechnical Specifications
Standard couplings with poppet valve. Faster interchangeability (except size 12,5). Standard couplings for general purpose applications with poppet valve shut-off system. Faster proprietary profile ( 1/2
More informationCONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9
CONTENTS PAGE NUMBER Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5 Hoist Rings Center Pull 6 Side Pull 7 Socket Head Stripper Bolts Inch 8 Metric 9 Punch Holder Shanks 10 Roller Stock Guides 11
More informationPRODUCT TRAINING MANUAL
PRODUCT TRAINING MANUAL for BRASS PRODUCTS designed for $5.95 TABLE OF CONTENTS Fitting Identification Page Course Outline...........................1 Glossary..............................2-5 Safety Information........................6
More informationATLAS. High Performance End Mills. High Speed Machining of Aluminum, Copper Alloys, Brass, and Plastics
ATLAS High Performance End Mills High Speed Machining of Aluminum, Copper Alloys, Brass, and Plastics Large Lineup for a Wide Range of Applications Square End, Corner Radius, Ball Nose, and Roughing Types
More information, & Series Nested Hardware
RECORD THIS INFORMATION FOR FUTURE REFERENCE BEFORE INSTALLING THE UNIT: Model Number Serial Number Date Purchased Place of Purchase USA SERVICE OFFICE Dometic Corp. 509 So. Poplar St. LaGrange, IN 46761
More information* * 4023 KR. Step 1 Prepare the Keyed Removable Unit. Not for use on electric or fire rated removable mullions
condition. *64009-00* 64009-00 Keyed Removable Mullions 403 KR Installation Instructions Not for use on electric or fire rated removable mullions This kit includes the following parts: (Not to scale) 5/6
More information* * KR54-F, KR9854 & KR9954 Installation Instructions. Read All Warnings Before Starting Installation! Index:
*941061-00* 941061-00 Keyed Removable Mullion KR54-F, KR9854 & KR9954 Installation Instructions CLASSIFIED CLASSIFIED C Read All Warnings Before Starting Installation! Index: General Information ----------------
More informationProduct instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E
Product instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E The Trimfast Ream Cutters are reliable, high performance cutters that will give you the results you need quickly
More informationstyle vision & quarter turns quarter turns section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
quarter turns vision & style quarter turns INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 3 quarter turns No. 626-PK Patent Pending
More informationFittings for bungee cords (pages 11 to 17) Elastic rubber bands and tensioners (pages 18 to 19)
2019 Bungee cord assemblies (pages 3 to 10) Fittings for bungee cords (pages 11 to 17) Elastic rubber bands and tensioners (pages 18 to 19) p.3 Flat bungee cords with two double wire hooks p.4 Bungee cords
More informationPOP-UP OPTION USER HARDWARE MANUAL. EdgeTech 4 Little Brook Road West Wareham, MA _REV_B 8/29/2018
POP-UP OPTION USER HARDWARE MANUAL 0019850_REV_B 8/29/2018 EdgeTech 4 Little Brook Road West Wareham, MA 02576 Tel: (508) 291-0057 Fax: (508) 291-2491 www.edgetech.com ii The information, figures, and
More informationMathey Dearman's revolutionary MagnaCut XM enables
Pipe and Plate Cutter & Welder (PATENTED) Mathey Dearman's revolutionary enables the welder and pipefitter to cut, bevel, and even weld steel pipe and steel plate without having to secure the machine to
More informationSpecial Three-Phase Motors with HSK-C Tool Holder for Manual Quick Tool Change
Special Three-Phase Motors with HSK-C Tool Holder for Manual Quick Tool Change Catalogue 21 E High speed three-phase motors with HSK-C tool holder for manual tool change protection type: IP54 Motor description
More informationINSTRUCTION MANUAL ALEKO RETRACTABLE AWNING
INSTRUCTION MANUAL for ALEKO RETRACTABLE AWNING www.alekoproducts.com FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY! 1 Important Safety Precautions WARNING NOTE: FOR PERSONAL SAFETY,
More informationDEBURRING BLADES & HOLDERS
HUK JAWS MAHINE VISES ER, DA, TG OLLETS ZIP/BURR B-SET FOR B-SERIES BLADES FEATURES: Takes all B-series blades. Includes one B-10 blade and one B-20 blade. Holder telescopes from 1/2 to 5. Handle has storage
More informationApplications: MultiCam Knife Accessories. Signs and Graphics Digital Print Cutting Packaging Aerospace And More
MultiCam Knife Accessories Complete EZ Knife Accessory Line Enhances Any Application MultiCam developed the EZ Knife System to serve markets that require mechanized knife cutting, creasing and perforation
More informationDeZURIK AM-SERIES MANUAL GEAR ACTUATOR USED ON BUTTERFLY VALVES
AM-SERIES MANUAL GEAR ACTUATOR USED ON BUTTERFLY VALVES Instruction D10501 January 2015 Instructions These instructions provide information about AM-Series Manual Actuators used on Butterfly Valves. They
More information/ Tool and Equipment Safety Tether System (T.E.S.T.S)
20 INSTRUCTIONS FOR USE AND PRODUCT GUIDE 799953 / 799955 Tool and Equipment Safety Tether System (T.E.S.T.S) Part # T353012 Rev 2 Reliance Industries LLC 2802 East X Street Deer Park, Texas 77536 281-930-800
More informationLite Lock Mounting Systems Lite Lock Mounting System
BALL QUICK LOCK CHANGE MOUNTING FIXTURING SYSTEM 1 Quick Change Fixturing Ball Lock Mounting System (Inch) Ball Lock for Rotary Indexers... 1.16-1.17 Ball Lock Accessories... 1. Commonly Asked Questions
More informationRAFTER VI. Installation and Operation CAREFREE WITH AUTOMATIC AWNING SUPPORT. RV Accessory PRODUCT OVERVIEW
CAREFREE RAFTER VI RV Accessory WITH AUTOMATIC AWNING SUPPORT Installation and Operation PRODUCT OVERVIEW The gives the awning user the ability to easily tighten the center fabric when the awning is extended.
More informationSet B. Set E. Set C. Set D. Set FR Ratchet. Set Burr-Ex. Long Reach Work Sets
Long Reach Work Sets Set B The Workhorse Popular standard set for holes, slots & edges. B holder supports all B blades, which can be inserted axially or perpendicular to the holder. Set E Heavy Duty B10
More informationTHEY VEGOT CARBIDE BURRS
THEY VEGOT CARBIDE BURRS Alpha carbide burs are offered in an array of shapes, fluting patterns and lengths suitable for all types of deburring applications. Precision flute grinding assures chatterless
More informationAssembly and Installation Instructions
U.S. patent number 8,708,369 part number 4750 for Blue Ox tow bars with Blue Ox brackets, Demco tow bars with Demco brackets, and all motorhome-mounted ROADMASTER tow bars Assembly and Installation Instructions
More informationBALCONIES. protect against falling ( Bauteile, die gegen Absturz sichern ) must be observed.
BCONIES This document is intended to provide general recommendations only. Trespa provides these guidelines and all testing, code and design data for informational purposes only and strongly advises that
More informationSCREENS TABBED PAGE SCREENS
SCREENS TABBED PAGE Index Page Bug Flaps.................................. 11 Crossbar................................... 2 Frame..................................... 2, 3 Handles...................................
More informationQuick Assembly Barbecue Assembly Manual
Quick ssembly arbecue ssembly Manual 85-3039 (G31501) Propane 1 YER LIMITED WRRNTY RED ND SVE MNUL FOR FUTURE REFERENCE. If pre-assembled, leave this manual with unit for consumer s future reference. For
More informationEdward W. Daniel, LLC
Edward W. Daniel, LLC Manufacturers of Diamond D Hardware Since 1921 Manufacturing Warehousing & Distribution Packaging Edward W. Daniel, LLC Manufacturers of Diamond D Hardware Since 1921 About EWD Capabilities...
More informationRH BABY&CHILD AVALON TWIN OVER TWIN BUNK BED INSTRUCTIONS
RH BABY&CHILD AVALON TWIN OVER TWIN BUNK BED INSTRUCTIONS Made in Vietnam Distributed in the U.S.A. by: Restoration Hardware Baby & Child 11640 Harrel St. Suite B Mira Loma, CA 91752 www.rhbabyandchild.com
More informationTidland Series 'C' Knifeholder MAINTENANCE MANUAL Crush Cartridge Class I, II, III Crush Slitting
Tidland Series 'C' Knifeholder MAINTENANCE MANUAL Crush Cartridge Class I, II, III Crush Slitting Please read and understand all the instructions before you start to maintain the Tidland Series 'C' Knifeholder.
More informationDC 700 Series Hose Reel - September 2010
Instructions Parts List Service Manual DC 700 Series Hose Reel - September 2010 Suitable for dispensing, transfer and evacuation of lubricants, fuels, air & other automotive & industrial products. To be
More informationBurr Rotary File Guide fullertontool.com
Burr Rotary File Guide 800.248.8315 989.799.4550 sales@fullertontool.com fullertontool.com Cut Types SINGLE CUT #1 Single cut is a general purpose tool designed for cast iron, steel, some copper and brass,
More informationI- 39. Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General Information and special features.
Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General nformation and special features. - 39 Seal out oil, water, dirt, dust and fumes wherever liquidtight flexible metal conduit
More informationSaw Blade Lube Systems
Environmentally Friendly Lubrication Saw Blade Lube Systems Cutting Edge Technology Saw Blade Lube Systems Cutting Edge Technology Cutting Edge Technology Unist saw blade lubrication systems deliver all
More informationHelping you work safely. Many industrial applications. Safety in design
Stops Dropped Tools Tools@Height is produced by Snap-on Industrial, a world leader in the design, manufacture and distribution of hand tools, power tools, diagnostic and inspection equipment, tool storage,
More informationInsulated Screwdrivers and Nut Drivers
Insulated Screwdrivers and Nut Drivers Features: Klein insulated tools meet or exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and are clearly marked with the official 1000-volt rating
More information& NANO EDGE BROCHURE NEW NANO EDGE BODY AND SKIRT A COMPLETE FAMILY OF COMMERCIAL CLEANING EQUIPMENT
& NANO EDGE BROCHURE NEW NANO EDGE BODY AND SKIRT A COMPLETE FAMILY OF COMMERCIAL CLEANING EQUIPMENT KEY FEATURES 70% REDUCTION LB/KG LB/KG APPLICATIONS EDGE Orbital Scrubhead delivers premium chemical-free
More informationAssembly and Installation Instructions
U.S. patent number 8,708,369 part number 4750 for Blue Ox tow bars with Blue Ox brackets, Demco tow bars with Demco brackets, and all motorhome-mounted ROADMASTER tow bars Assembly and Installation Instructions
More informationEXPANDING 07BARRIERS
SECTION EXPANDING 07BARRIERS Note: BPG600RW shown with optional locking castors. When it comes to quality, range and flexibility of design, our Port-a-guard systems leads the industry in expanding barriers.
More informationThomas Scientific Swedesboro, NJ U.S.A.
Thomas Scientific Swedesboro, NJ 08085-0099 U.S.A. Wiley Laboratory Mill, Model 4 3375-E10 (115 V, 50/60 HZ) USE AND CARE OF CATALOG NUMBER: 3375-E10 Wiley Laboratory Mill, Model 4 (115 V, 50/60 HZ) UNPACKING
More informationPlumbing Tools STRAIGHT SEAT WRENCH. Plumbing Tools. 4-PIECE RATCHET SEAT WRENCH SET Steel Construction. Pouch packed.
4-PIECE RATCHET SEAT WRENCH SET Pouch packed. STRAIGHT SEAT WRENCH Installation of Faucet Seats. 60124 5 50 15.75 RATCHET WRENCH Open Ends, 3/8 X 7/16 60103 Stepped ends 10 200 3.30 60102 Tapered ends
More informationAuto Rewind Hose Reel 10M / 20M / 30M Models
Auto Rewind Hose Reel 10M / 20M / 30M Models Instruction Manual 10M / 20M / 30M Auto Rewind Hose Reel Installation, Hose Replacement and Troubleshooting Guide Product Codes: 1110H / 1120H / 1130H Models
More informationT&B Fittings. Industrial Fittings. Liquidtight Flexible Nonmetallic Conduit Fittings. Specifications Type A Conduit Fittings
T& Fittings Liquidtight Flexible Nonmetallic onduit Fittings Specifications Type onduit Fittings Series 6302 Liquidtight Flexible Nonmetallic onduit Fittings pplication To provide a liquidtight, dustight
More informationContents. Company Background FLOWSTOPPER Plugging Device Kit and Replacement Parts Key Features & Benefits... 4
Contents Company Background... 2 FLOWSTOPPER Plugging Device Kit and Replacement Parts... 3 Key Features & Benefits... 4 Frequently Asked Questions... 5 Step by Step Instructions... 6 FLOWSTOPPER Warranty...
More information300 ft. 5/8 Hose wagon
300 ft. 5/8 Hose wagon Model 95956 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. (Garden hose is not included).
More informationCloset and Specialty Hardware
Closet and Specialty Hardware Door & Mirror Hardware...100 Magnetic and Bullet Catches... 100 Sliding Door Pulls........................................ 100 Mirror Clips/Glass Clips, Fittings and Latches...
More informationCUSTOM CYLINDERS INTERNATIONAL, INC. SOCKET JENIE PRODUCTS
CUSTOM CYLINDERS INTERNATIONAL, INC. SOCKET JENIE PRODUCTS The SOCKET JENIE product line was developed for use with a 110V or battery operated drill motor to reduce the amount of time required to set up
More informationALPINE SLIDEOUT COVER
INSTALLATION MANUAL ALPINE SLIDEOUT COVER RV Read this manual before installing or using this product. Failure to follow the instructions and safety precautions in this manual can result in personal injury
More informationTUCSON PATIO AWNING USE & MAINTENANCE
TUCSON PATIO AWNING USE & MAINTENANCE Toll Free 877-792-1775 Fax 877-792-0031 swsuncontrolpro.com sales@swsuncontrol.com 1 INTRODUCTION...3 2 SAFETY...3 2.1 General safety information... 3 2.2 Safety devices...
More information6. Textile Products. Cargo Restraint Nets. Please feel free to contact us for your projects!
6. Textile Products Cargo Restraint Nets and Straps 37 6. Textile Products Cargo Restraint Nets allsafe JUNGFALK manufactures for various customers cargo restraint nets designed to their specific requirements.
More informationNORMACLAMP Hose Clamps
NORMACLAMP NORMACLAMP NORMACLAMP S/SP Sealing clamps (NORMACLAMP S) to DIN 3017, Retaining clamps (NORMACLAMP SP) to DIN 3016 Thanks to their robust clamping brackets with metric bolts the clamping force
More information