Burr Rotary File Guide fullertontool.com
|
|
- Steven Sullivan
- 5 years ago
- Views:
Transcription
1 Burr Rotary File Guide fullertontool.com
2 Cut Types SINGLE CUT #1 Single cut is a general purpose tool designed for cast iron, steel, some copper and brass, and other ferrous materials. It will give good material removal and good workpiece finish. CHIP BREAKER CUT #2 The addition of a chip breaker will reduce sliver size and improve operator control at a slightly reduced surface finish. Available on Quote Only. DOUBLE CUT #3 DIAMOND CUT #4 The double cut allows for rapid stock removal in harder materials. The addition of the left hand flutes reduces the pulling action, which allows for better operator control. It reduces the size of the chips, and it can be used at slower than normal speeds. The diamond cut is very effective in heat treated and tough alloy steels, producing etremely small chips. It offers very good operator control with good stock removal at the sacrifice of finish. The diamond grind will reduce tool life. Available on all Burrs - Add 20% to List Price of #1 Cut FAST MILL CUT #5 For use on non-ferrous and non-metallic materials. It is designed for rapid stock removal with minimum chip loading. WHEN ORDERING, SPECIFY TOOL # OR EDP # AND SPECIFIC CUT REQUIRED NOTE: CHIP BREAKER, COARSE, AND FINE CUTS ARE ONLY AVAILABLE ON QUOTE Recommendations: For maimum control and to prevent whipping and chatter, insert the shank into the chuck as far as possible. Avoid ecessive pressure, which slows the spindle speed and damages the cutting edge. Avoid operating the burr beyond normal resharpening, otherwise resultant heat and pressure will cause ecessive chipping and possible braze failure. Burrs with a head diamter of 5/16 or larger, with the eception of etended shanks, are available with a 6mm diameter shank. They will retain standard fractional cutting diameters and cutting length. Add $2.50 to the list price fullertontool.com
3 Burr SA SA Cylindrical Appro. Burr SA 1/4 Shank 1/8 5/8 2 SA /16 5/8 2 SA /4 5/8 2 SA SA-1A /16 3/4 2 1/2 SA /4 2 1/2 SA / /4 SA-3A /2 3 1/4 SA-3B / /4 SA / /4 SA / /4 SA /2 2 1/2 SA /4 3/4 2 1/2 SA /4 SA /4 SA Etended Shank 1/4 1/2 6 1/2 SA-1X /8 3/4 6 3/4 SA-3X /2 1 7 SA-5X Burrs featured on these pages are available with #4 Diamond Cut. Add 20% to list price of #1 Cut. All Burrs 5/16 diameter and larger furnished with 1/4 1 3/4 steel shanks.
4 Burr SB Burr SB 1/4 Shank SB Cylindrical End Cut Appro. 1/8 5/8 2 SB /16 5/8 2 SB /4 5/8 2 SB SB-1A /16 3/4 2 1/2 SB /4 SB-2A /4 2 1/2 SB / /4 SB-3A /2 3 1/4 SB-3B / /4 SB / /4 SB / /4 SB /2 2 1/2 SB /4 3/4 2 1/2 SB /4 SB /4 SB Etended Shank 1/4 1/2 6 1/2 SB-1X /8 3/4 6 3/4 SB-3X /2 1 7 SB-5X Burrs with a head diamter of 5/16 or larger, with the eception of etended shanks, are available with a 6mm diameter shank. They will retain standard fractional cutting diameters and cutting length. Add $2.50 to the list price fullertontool.com
5 Burr SC SD SC SD Cylindrical Ball Nose Appro. Burr SC SD 1/4 Shank 1/8 5/8 2 SC /16 5/8 2 SC /4 5/8 2 SC SC-1A /16 3/4 2 1/2 SC /4 SC-2A /4 2 1/2 SC / /4 SC-3A /2 3 1/4 SC-3B / /4 SC / /4 SC / /4 SC / /4 SC Etended Shank 1/4 1/2 6 1/2 SC-1X /8 3/4 6 3/4 SC-3X /2 1 7 SC-5X Ball Shape Appro. 1/8 1/8 2 SD /16 3/16 2 SD /4 1/4 2 SD /16 5/16 2 1/4 SD /8 3/8 2 1/8 SD /16 7/16 2 1/8 SD /2 1/2 2 1/4 SD /8 5/8 2 1/4 SD /4 3/4 2 1/2 SD /4 SD Etended Shank 1/4 1/4 6 1/4 SD-1X /8 3/8 6 3/8 SD /2 1/2 6 1/2 SD-5X Burrs featured on these pages are available with #4 Diamond Cut. Add 20% to list price of #1 Cut. All Burrs 5/16 diameter and larger furnished with 1/4 1 3/4 steel shanks.
6 Burr SE SF Burr SE SF 1/4 Shank SE Egg Shape Appro. 3/16 5/16 2 SE /4 3/8 2 SE /8 5/8 2 3/8 SE /2 7/8 2 5/8 SE / /4 SE / /4 SE Etended Shank 1/4 3/8 6 3/8 SE-1X /8 5/8 6 5/8 SE-3X /2 7/8 6 7/8 SE-5X SF Round Tree Cut Appro. 1/4 5/8 2 SF /8 3/4 2 1/2 SF / /4 SF /2 3/4 2 1/2 SF /4 SF / /4 SF SF /4 1 1/4 3 SF /2 3 1/4 SF Etended Shank 1/4 1/2 6 1/2 SF /8 3/4 6 3/4 SF /2 1 7 SF Burrs with a head diamter of 5/16 or larger, with the eception of etended shanks, are available with a 6mm diameter shank. They will retain standard fractional cutting diameters and cutting length. Add $2.50 to the list price fullertontool.com
7 Burr SG SM SG Pointed Tree Shape Appro. Burr SG SM 1/4 Shank 1/4 5/8 2 SG /16 3/4 2 1/2 SG /8 3/4 2 1/2 SG /2 3/4 2 1/2 SG /4 SG / /4 SG / /4 SG /2 3 1/4 SG Etended Shank 1/4 1/2 6 1/2 SG-1X /8 3/4 6 3/4 SG-3X /2 1 7 SG-5X SM Cone Shape Appro. #1 Cut #3 Cut 1/2 2 SM /4 3/4 2 SM /2 SM /4 2 1/2 SM-3A /8 5/8 2 1/2 SM /2 7/8 2 3/4 SM /8 1 3 SM Burrs featured on these pages are available with #4 Diamond Cut. Add 20% to list price of #1 Cut. All Burrs 5/16 diameter and larger furnished with 1/4 1 3/4 steel shanks.
8 Burr SL SH Burr SL SH 1/4 Shank SL 14 Included Angle Appro. 1/4 5/8 2 SL /16 7/8 2 3/4 SL /8 1 1/16 3 SL /2 1 1/8 3 SL /8 1 5/16 3 1/4 SL /4 1 1/2 3 1/4 SL Etended Shank 5/16 7/8 7 SL-2X /8 1 1/16 7 1/8 SL-3X /2 1 1/8 7 1/4 SL-4X SH Flame Shape Appro. 1/4 5/8 2 SH /16 3/4 2 1/2 SH /2 1 1/4 3 SH /8 1 7/16 3 1/4 SH /4 1 5/8 3 1/2 SH Etended Shank 5/16 3/4 6 3/4 SH-2X /2 1 1/4 7 1/4 SH-5X Burrs with a head diamter of 5/16 or larger, with the eception of etended shanks, are available with a 6mm diameter shank. They will retain standard fractional cutting diameters and cutting length. Add $2.50 to the list price fullertontool.com
9 Burr SK SJ SK 90 Included Angle Appro. Burr SK SJ 1/4 Shank #1 Cut #3 Cut 1/4 1/8 2 SK * 50252* 3/8 3/16 2 1/8 SK /2 1/4 2 1/8 SK /8 5/16 2 1/4 SK /4 3/8 2 3/8 SK /8 7/16 2 1/2 SK /2 2 1/2 SK * Items are Double Ended SJ 60 Included Angle Appro. 1/4 3/16 2 SJ * 51003* 5/16 1/4 2 1/4 SJ /8 5/16 2 1/4 SJ /2 7/16 2 3/8 SJ /8 1/2 2 1/2 SJ /4 5/8 2 5/8 SJ /8 3/4 2 3/4 SJ /8 2 3/4 SJ * Items are Double Ended Burrs featured on these pages are available with #4 Diamond Cut. Add 20% to list price of #1 Cut. All Burrs 5/16 diameter and larger furnished with 1/4 1 3/4 steel shanks.
10 Burr SN SNE Burr SN SNE 1/4 Shank SN Inverted Cone Appro. #1 Cut #3 Cut 1/4 5/16 2 SN /8 3/8 2 1/8 SN /2 1/2 2 1/4 SN /8 3/4 2 1/2 SN /4 5/8 2 3/8 SN SNE Inverted Cone - End Cut Appro. #1 Cut #3 Cut 1/4 5/16 2 SN-1E /8 3/8 2 1/8 SN-2E /2 1/2 2 1/4 SN-3E /8 3/4 2 1/2 SN-6E /4 5/8 2 3/8 SN-7E Burrs with a head diamter of 5/16 or larger, with the eception of etended shanks, are available with a 6mm diameter shank. They will retain standard fractional cutting diameters and cutting length. Add $2.50 to the list price. Burrs featured on these pages are available with #4 Diamond Cut. Add 20% to list price of #1 Cut. All Burrs 5/16 diameter and larger furnished with 1/4 1 3/4 steel shanks fullertontool.com
11 Burr Head 1/16 1/4 3/32 7/16 9/16 9/16 1/16 - Head, Shank 3/32 7/16 9/16 3/32 3/32 1/4 1/4 1/4 Style SA-41 SA-42 SA-43 SB-41 SB-43 SC-41 SC-42 SD-41 SD-42 SE-41 SH-41 SG-41 1 Appro. #1 Cut #3 Cut Appro. #1 Cut #3 Cut Appro. #1 Cut #3 Cut Head 3/8 1/4 11/32 7/16 5/8 3/8 7/64 1/16 3/32 Style SG-43 SG-44 SF-41 SF-42 SM-41 SM-42 SM-43 SL-41 SL-42 SJ-42 SK-42 SN-41 SN Incl. 14 Incl. 7 Incl. 8 Incl. 8 Incl. 60 Incl. 90 Incl. 10 Incl. 10 Incl. 1 Appro. #1 Cut #3 Cut Appro. #1 Cut #3 Cut Appro. #1 Cut #3 Cut
12 Burr 5/32 - Head, Shank Head 5/32 5/32 3/8 9/32 1/4 Style SA-52 SA-53 SC-52 SC-53 SD-53 SG-53 SF-53 SH-53 SE-53 SN-53 SM-53 SL Incl. 10 Incl. 14 Incl. 1 Appro. #1 Cut #3 Cut /4 Head, Steel Shank Head 1/4 3/8 1/4 Style SA-51 SB-51 SD-51 SC-51 SF-51 SG-51 SM-51 SE-51 SN Incl. 10 Incl. 2 Ma #1 Cut #3 Cut fullertontool.com
13 Burr Head, Steel Shank Head 5/8 5/8 7/16 9/32 1/4 3/32 5/32 Style SA-81 SC-81 SD-81 SF-81 SG-81 SL-81 SE-81 SN-81 SK-81 SJ Incl. 10 Incl. 90 Incl. 60 Incl. 2 Appro. #1 Cut #3 Cut Burrs are available with #4 Diamond Cut, add 20% to list price of #1 Cut.
14 Metric Burr 1.5- Head, Shank Head Style 1.5mm 6mm 2mm 1 15mm 2mm 11mm 15mm 2mm 2mm 6mm 7mm 7mm 10mm MSA-41 MSA-42 MSA-43 MSB-41 MSC-41 MSC-42 MSD-41 MSD-42 MSE-41 MSH-41 MSG-41 MSG-43 38mm Appro. #1 Cut #3 Cut Head 15mm 8mm 15mm 9mm 11mm 16mm 10mm 1 2mm 5mm Style MSG-44 MSF-41 MSF-42 MSM-41 MSM-42 MSM-43 MSL-41 MSL-42 MSJ-42 MSK-42 MSN-41 MSN Incl. 14 Incl. 7 Incl. 8 Incl. 8 Incl. 60 Incl. 90 Incl. 10 Incl. 10 Incl. 38mm Appro. #1 Cut #3 Cut fullertontool.com
15 Metric Burr 6.4mm Head, Steel Shank Head Style 1 5mm 6mm mm 6mm MSA-51 MSB-51 MSD-51 MSC-51 MSF-51 MSG-51 MSM-51 MSE-51 MSN Incl. 10 Incl. 51mm Ma #1 Cut #3 Cut Burr Sets Are Also Available! Our Burr Sets are available in both single and double cut versions. Each set is conveniently packaged in a wooden bo. Check our website at fullertontool.com for our full offering. Burrs are available with #4 Diamond Cut, add 20% to list price of #1 Cut.
16 Save Money with Our $10 Flat Rate Shipping Start saving on your shipments with our $10 Flat Rate Shipping. Mention Flat Rate Shipping with your order and you ll receive RATE SHIPPING our $10 Flat Rate Shipping for your entire order. Your cutting tools will be delivered in 1 to 3 business days via USPS and can be shipped anywhere within the continental United States. Download Our Speed & Feed Calculator Mobile App Calculate optimal settings instantly from the convenience of your phone or tablet, regardless if you re slotting, peel milling or trichoidial milling. Available for Android & ios, it will soon be your favorite resource when tooling up a machine. About Fullerton Company Fullerton Company is a third-generation, family owned business that specializes in the design and production of solid carbide cutting tools for a wide variety of industries. Founded in 1942, the company manufactures high quality end mills, drills, reamers, burrs, saws, keyseat cutters and PCD tooling. Fullerton s Advanced Solutions Team (FAST) is the foundation of the company s commitment to continuously improve, innovate and provide vast product diversity. Fullerton is an ISO 9001:2008 certified company. Fullerton Headquarters 121 Perry Street Saginaw, MI Fullerton West Facility Sunshine Drive Saginaw, MI sales@fullertontool.com fullertontool.com Copyright Fullerton Company
THEY VEGOT CARBIDE BURRS
THEY VEGOT CARBIDE BURRS Alpha carbide burs are offered in an array of shapes, fluting patterns and lengths suitable for all types of deburring applications. Precision flute grinding assures chatterless
More informationATLAS. High Performance End Mills. High Speed Machining of Aluminum, Copper Alloys, Brass, and Plastics
ATLAS High Performance End Mills High Speed Machining of Aluminum, Copper Alloys, Brass, and Plastics Large Lineup for a Wide Range of Applications Square End, Corner Radius, Ball Nose, and Roughing Types
More informationMILLING TURNING & MATERIALS S.A.S Nit Kra 1 G No. 64 A 72 - Colombia - Cali Valle - Tel Cel
MILLING TURNING & MATERIALS S.A.S Nit 900.352.845-1 Kra 1 G No. 64 A 72 - Colombia - Cali Valle - Tel. 3726786 Cel. 310.2213354 http://www.mtm.com.co Complete Product Line ISO 9001:2000 CERTIFIED Cutting
More informationHANDWHEELS.
HANDWHEELS 5 Handwheels Aluminum Angular Solid Handwheel...5.2 Aluminum Angular Spoked Handwheel... 5.2 Aluminum Finger Wheel... 5.10 Cast Angular Spoked Handwheel... 5.3 Cast Iron Angular Spoked Handwheel...
More informationNEW PRODUCTS 6-7 HEAVY DUTY
deburring system NEW PRODUCTS 6-7 HEAVY DUTY (ø3.2mm) 8-9 NOGA BURR 3 NOGA BURR 5 SUPER BURR EDGE OFF RAPID BURR NOGAGRIP HANDLE NOGAGRIP 3 HANDLE S HOLDER S BLADES Holes Straight Edge Deep Holes Curved
More informationSet B. Set E. Set C. Set D. Set FR Ratchet. Set Burr-Ex. Long Reach Work Sets
Long Reach Work Sets Set B The Workhorse Popular standard set for holes, slots & edges. B holder supports all B blades, which can be inserted axially or perpendicular to the holder. Set E Heavy Duty B10
More informationHANDLES, LE VERS & CR ANKS
Handles, Levers & Cranks Plastic Pull/Lift Handle...112 Plastic Revolving Fold-Away Handle... 95 Plastic Revolving Heavy Duty Handle With Steel Shank... 92 Plastic Revolving Handle With Steel Through Shank...
More informationdeburring system HEAVY DUTY (ø3.2mm) 6-7 LIGHT DUTY (ø2.6mm) 8-9 COUNTERSINKS ROTODRIVE COUNTERSINKS SCRAPERS YT SCRAPERS
deburring system HEAVY DUTY (ø3.2mm) 6-7 NOGA BURR 3 NOGA BURR 5 SUPER BURR EDGE OFF RAPID BURR NOGAGRIP HANDLE NOGAGRIP 3 HANDLE S HOLDER S BLADES Holes Straight Edge Deep Holes Curved Edge Cross Holes
More informationTOOLING COMPONENTS. tel fax Clamping Kits Step Blocks...7. Driver Studs...
Clamping Kits... 2-8 Step Blocks...7 Driver Studs... 9-13 Bolts, Screws... 14-20 Nuts, Washers... 21-29 Sex Bolts... 30-31 Clamps... 32-44 Screws... 45-49 Knobs & Levers... 49-53 Rest Pads...54 Index Plungers...
More informationdeburring system NEW PRODUCTS 6-7 HEAVY DUTY (ø3.2mm) 8-9 LIGHT DUTY (ø2.6mm) COUNTERSINKS ROTODRIVE COUNTERSINKS SCRAPERS 16-17
NOGA head office Noga Engineering Ltd. was established in 980 by Gustav Hirsch and his two sons Neft and Shuli. Gustav is the founder of the cutting tool industry of Israel. In 94 he started Hanita Metal
More informationProvince of Prince Edward Island Canada. Part II. Index. Volume 138, Published by Authority
Province of Prince Edward Island Canada Part II Index Volume 138, 2012 Published by Authority Charlottetown, Prince Edward Island Michael Fagan, Queen's Printer 2012 ROYAL GAZETTE 1 INDEX TO PART II OF
More informationLeading Deburring Solutions NEW. Hand Deburring Tool Selector. TheFinishing. Touch.
Leading Deburring Solutions NEW Hand Deburring Tool Selector www.shaviv-genius.com TheFinishing Touch www.shaviv.com SHAVIV by VARGUS VARGUS Ltd., established in 1960, is a world leading developer, manufacturer
More informationBevel Buddy Instruction Manual
Bevel Buddy Instruction Manual We at Precision Sharpening Devices Inc. believe there are two very important steps in maximizing the savings this equipment can provide your company. First, use this manual
More informationTOOLS AND INSTRUMENTS
IMPERIAL TUBE CUTTERS JUNIOR TUBE CUTTER TOOLS AND INSTRUMENTS IMP-227-FA For 1/8 to 3/4 (4 to 19 mm) O.D. tubing, (1/8 to 5/8 nom.). Enclosed feed mechanism. Length: 3-1/2 Weight: 5 oz. P944 IMPERIAL
More informationLeading Deburring Solutions. TheFinishing. Touch.
Leading Deburring Solutions TheFinishing Touch www.shaviv.com SHAVIV by VARGUS VARGUS Ltd., established in 1960, is a world leading developer, manufacturer and supplier of cutting and finishing tools to
More informationNoga Head Office. simply sophisticated
Noga Head Office NOGA ENGINEERING & TECHNOLOGY (2008) LTD Noga Engineering and Technology was established in 1980. Over the years the company has grown to become the world leader in the manufacturing of
More informationTOOLS AND INSTRUMENTS
IMPERIAL TUBE CUTTERS JUNIOR TUBE CUTTER TOOLS AND INSTRUMENTS IMP-227-FA For 1/8 to 3/4 (4 to 19 mm) O.D. tubing, (1/8 to 5/8 nom.). Enclosed feed mechanism. Length: 3-1/2 Weight: 5 oz. P944 IMPERIAL
More informationNEW. Hand Deburring Tool Selector. TheFinishing. Touch.
NEW Hand Deburring Tool Selector www.shaviv-genius.com TheFinishing Touch www.shavivusa.com SHAVIV by VARGUS VARGUS Ltd., established in 1960, is a world leading developer, manufacturer and supplier of
More informationTOOLS AND INSTRUMENTS
IMPERIAL TUBE CUTTERS JUNIOR TUBE CUTTER TOOLS AND INSTRUMENTS IMP-227-FA For 1/8 to 3/4 (4 to 19 mm) O.D. tubing, (1/8 to 5/8 nom.). Enclosed feed mechanism. Length: 3-1/2 Weight: 5 oz. P944 IMPERIAL
More informationdeburring system Head office Sales offices ISRAEL NOGA Engineering Ltd. Tel: Fax:
C M Y CM MY CY CMY K deburring system C A T A L O G Head office ISRAEL NOGA Engineering Ltd. Tel: 972-4-9808080 Fax: 972-4-9808638 noga@noga.com www.noga.com Sales offices ISRAEL NOGA Tools Tel: 972-9-835-3243
More informationRT INTERNATIONAL CATALOGUE TOOLS FOR EVERY APPLICATION LEADERS IN THE FIELD OF JEWELLERY TOOLS AND EQUIPMENTS
RT INTERNATIONAL LEADERS IN THE FIELD OF JEWELLERY TOOLS AND EQUIPMENTS CATALOGUE TOOLS FOR EVERY APPLICATION SINCE 2010 13 ABOUT US Established in the year 2010, Our pursuit of getting outstanding recognition
More informationFlute Type. Max Drill Depth L1. Lth L2
olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Flute illustrated L3 Available Ex-Stock older Reference Number Flute Type older Type Drill Range D Max Drill Depth L1 Flute
More informationSolid Endmill. Carbide Material L1~L50. Tool Selection Guide. Surface Finish Oriented L18~L25. High-Efficiency Chip Evacuation.
1~5 Tool Selection Guide Application and Selection Identification System / Icon Glossary Case Studies 2~9 2 4 9 Surface Finish Oriented 1~14 Square 1 For Automatic athes FESW 14 Multi-Purpose High-Efficiency
More informationBAK-PAK AND EURO BAK-PAK CARBIDE KNIFE SYSTEMS
40 BAK-PAK AND EURO BAK-PAK CARBIDE KNIFE SYSTEMS Wisconsin Knife Works BAK-PAK and EURO BAK-PAK carbide knife systems are the ideal solution for a multitude of moulding applications from MDF and glued
More informationCONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9
CONTENTS PAGE NUMBER Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5 Hoist Rings Center Pull 6 Side Pull 7 Socket Head Stripper Bolts Inch 8 Metric 9 Punch Holder Shanks 10 Roller Stock Guides 11
More informationhigh performance industrial knives
high performance industrial knives 2 paper and graphic arts The graphic arts sector requires increasing precision and speed in its cutting operations. KADUR knives cut better and last longer, increasing
More informationPremium Cutters for Plastic Gate
Premium Cutters for Plastic Gate Slim Line Rounded Nipper Slightly Rounded Jaws for a Slightly Rounded Cut Slim Profile Blades Wishbone Style Spring Reduces User Fatigue SNP Model Flat Nipper Flat Back
More informationAviation Snips. Multi-Cable Cutter
CUTTING tools Aviation Snips 0653-01L Drop-forged, chrome-moly steel blades with serrated edges. Includes left, right and straight-cut versions with color coded grips green (right), yellow (straight),
More informationSupplying the Aerospace, Defense & Metal Working Industries Since 1951!
Toll Free US & Canada: 800-645-8180 Eastern Division 60 Fleetwood Ct., Ronkonkoma, NY 11779-6907 Telephone: (631) 471-3300 Fax: (631) 471-3308 Western Division 1219 W. Mahalo Place, Rancho Dominguez, CA
More informationLeading edge technology for high efficiency steel turning. The 2 in 1 coating technology ensures longer tool life.
2014.01 B165E New CVD Coated Grade for High Speed Turning of Steels /RP Chip Breaker Expansion Leading edge technology for high efficiency steel turning. The 2 in 1 coating technology ensures longer tool
More informationThis section shows our line of hand hacksaws, including our new bi-metal unique blades, hacksaw frames, PVC and compass saws. HAND SAWS AND BLADES
This section shows our line of hand hacksaws, including our new bi-metal unique blades, hacksaw frames, PVC and compass saws. HAND SAWS AND BLADES Bi-Metal Unique Saw Technology Decades ago, bi-metal blade
More informationsimply sophisticated simply sophisticated
Innovation is the beneficial utilization of knowledge and creativity, in order to discover and realize what does not yet exist. Erik Keldmann Noga is innovation Noga Head Office NOGA ENGINEERING & TECHNOLOGY
More informationWORKHOLDING COMPONENTS
Adjustable Clamp Heels... 274 Adjustable Clamp Rests...273 Adjustable Step Blocks...284 Assemblies, Spherical Flange...260 Bolts, Dovetail...258 Bolts, Swing... 241 Bolts, T...258 Bolts, T-Slot...257 Bolts,
More informationApplications: MultiCam Knife Accessories. Signs and Graphics Digital Print Cutting Packaging Aerospace And More
MultiCam Knife Accessories Complete EZ Knife Accessory Line Enhances Any Application MultiCam developed the EZ Knife System to serve markets that require mechanized knife cutting, creasing and perforation
More informationSPECIAL-DESIGN Deburring Tools.
SPECIAL-DESIGN Deburring Tools. 75 Contour-following blades provide for perfectly clean and even deburring of any kind of edge. Handles and Blades for Deburring work involving: soft and hard material types
More informationAdvertising Locations McCarran International Airport Terminal 1 & Terminal 3
Terminal & Terminal Terminal - T Terminal - T Parking A Gates Ticketing Bag Claim Esplanade Parking Ticketing & E Gates Bag Claim Rotunda Ticketing B Gates D Gates C Gates N CCS- CS- CS-0 CS-0 CS-0 CS-
More informationFor draining expansion tanks, other liquid storage vessels.
Plumbing Specialties 26-100 & 26-300 SERIES COMPRESSION GAUGE COCKS For draining expansion tanks, other liquid storage vessels. 26-100: rated up to 125 psig 26-300: soft metal seat/stuffing box rated up
More informationPILOTED OXYGEN SINGLE HOLE BURNER TIPS
PILOTED OXYGEN SINGLE HOLE TIPS BULLETIN 15A Carlisle Piloted Oxygen Burner Tips are offered in a multitude of different styles. These tips can be manufactured from brass, stainless steel, or both. They
More informationModel Code No. List $ SALE $ SG
DEBURRING HOLDING PROMO COOLING PRICI NG Promo N Set - NG8000 N Cobalt Set - NG8100 For Steel, Aluminum, Plastic NogaGrip 2 handle 10pcs N1 blades For Plastic & Hard Materials NogaGrip 2 handle 20pcs N10
More informationSECTION I-1. Type: 1812-AC. Fuel: Air-Gas.
RADIANT LINE BURNER. SECTION I-1. Type: 1812-AC. Manufactured from a heat resisting cast alloy with a ceramic front face, this radiant burner type is ideally suited for use in Infrared Heating production
More informationProduct Information. Unigrat Universal Handle, designed in accordance with the latest ergonomic research.
ENTGRTERPROGRMM DEBURRING EBVUREURS ONTBRM FGRTERPROGRM PROGRM PROGRMM ESCREDORES NRZĘDZI ФАСКОСНИМАТЕЛИ ÇPK RZIGLJEVLCI NOŽEVI SORJÁZÓ GRNDYMO TEMİZLEME Z KÍNÁLT ODHROTOVÁNÍ DE STRUGNJE PROGRMM DE PROGRM
More informationDEBURRING BLADES & HOLDERS
HUK JAWS MAHINE VISES ER, DA, TG OLLETS ZIP/BURR B-SET FOR B-SERIES BLADES FEATURES: Takes all B-series blades. Includes one B-10 blade and one B-20 blade. Holder telescopes from 1/2 to 5. Handle has storage
More informationZPS BALL LOCK QUICK CHANGE FIX TURING. Ball Lock Mounting System (Inch) Zero Point Mounting System. Ball Lock Mounting System (Metric)
QUICK CHANGE FIXTURING M O U NTIN G SYS TEM Ball Lock Mounting System (Inch) Ball Lock for Rotary Indexers...19 Ball Lock Accessories... Ball Lock Selector Guides... 27 Commonly Asked Questions About the
More informationSwagelok Thermoplastic Hose Hand Swager User s Manual
Swagelok Thermoplastic Hose Hand Swager User s Manual Thermoplastic Hose Hand Swager User s Manual Contents Hand Swager Components....................... 2 Setup Swager.......................................
More informationKNIFE SHARPENING TECHNIQUE
SharpX A Information on Sharpening Technique Including Sharpening Instructions Sharpening is one of mans oldest skills and has laid the foundation for the development and survival of mankind. From the
More informationHAND TOOLS. Combination Wrenches 120/1. Combination Wrench Sets 120/1CB. Adjustable Wrenches 250/1. Hexagon Wrenches 230/3SL.
Combination Wrenches 120/1 Unior wrenches are made of quality chrome vanadium steel. They are available in two lines: chrome plated with polished heads or chromium plated only. Wrenches are functional
More informationOrder Number. Jaw Capacity (in) 7R* straight jaw 7 1-1/2 10R straight jaw /8 10CR curved jaw /8. Locking Sheet Metal Tool. Overall.
Locking Pliers VISE-GRIP Locking Pliers Locking Pliers 4WR curved jaw with wire cutter 4 1 5WR curved jaw with wire cutter 5 1-1/8 7WR curved jaw with wire cutter 7 1-1/2 10WR curved jaw with wire cutter
More informationFriction and knife shafts
Pneumatic expansion shafts Mechanical expansion shafts Expansion couplings Expansion chucks and adapters Friction and knife shafts Shaft handling Friction and knife shafts EXPANSION UNITS Pneumatic expansion
More informationSaw Blade Lube Systems
Environmentally Friendly Lubrication Saw Blade Lube Systems Cutting Edge Technology Saw Blade Lube Systems Cutting Edge Technology Cutting Edge Technology Unist saw blade lubrication systems deliver all
More informationDESIGN GUIDE >> SHEET METAL. Quotes in Hours. Parts in Days. rapidmanufacturing.com
Quotes in Hours. Parts in Days. rapidmanufacturing.com Contents 03 Overview 03 Capabilities 03 Certifications & Registrations 04 Stock Materials 05 Uniform Wall Thickness 06 Bends 07 Hems 08 Offsets DESIGN
More informationCouplings for Gates Hoses 7 Combination Nipple
Supersedes 1 Long Shank Couplings for Gates Hoses 7 Combination Nipple Description: Cast brass, serrated shank, set has hex male and hex swivel female couplings, with a washer seal. Threads are GHT or
More informationPro 88/86. The classic torch system. All components are carefully chosen to guarantee long service life. Ergonomic designed handles
The classic torch system All components are carefully chosen to guarantee long service life Ergonomic designed handles Works in all weather conditions Wide range of burners for all applications Pro 88
More informationFertilizer Applicator Shanks
Fertilizer Applicator Shanks All shanks are made from 5160 chromium manganese steel, heat treated and tempered to provide over 150,000 psi tensile strength and resistant to memory set. Order No. Description
More informationIsotemp All Purpose Crimped Wire Wheels
Isotemp All Purpose Crimped Wire Wheels Isotemp All Purpose Crimped Wire Wheels feature a malleable narrow face for more flexible brushing. Uses a patented wire for added durability and longer life, and
More informationTRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH
www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH www.danly.com PINS & BUSHINGS INCH Service We Deliver and Quality You Can Depend On DANLY IEM is a leading manufacturer of die sets and
More informationØ 6mm grinding pin, carbide burrs Ø 27mm Diamond Cylinder
2007-09-13. 2010-01-27 Ø 6mm grinding pin, carbide burrs Ø 27mm Diamond Cylinder Type: Ingersoll Rand G1H 350 PG4M PG4M. 35000 rpm Ø 6mm grinding pin Ingersoll Rand G1H 250 PG4M. 25000 rpm Ø 27mm diamond
More information2016 PRODUCTS & PRICES
2016 PRODUCTS & PRICES LENGTH STOPS THAT ARE USER FRIENDLY Orders 1-800-821-3491 Phone 1-717-484-0230 Fax 1-717-484-0933 E-mail mayaposi@att.net Web mayaposi-stop.com MAYA POSITIONING EQUIPMENT MFG CO.
More informationMORE IMPACT PRO PRODUCTS EXPANDED S2 SCREWDRIVING BIT OFFERING NEW LOWER PRICING ON MOST SCREWDRIVING PRODUCTS UPDATED AND NEW PRODUCT SETS
MORE IMPACT PRO PRODUCTS EXPANDED S2 SCREWDRIVING BIT OFFERING LOWER PRICING ON MOST SCREWDRIVING PRODUCTS UPDATED AND PRODUCT SETS REDESIGNED PACKAGING IMPROVES MERCHANDISING AND EASE OF CONSUMER SHOPPING
More informationNEW Super Long Life. Exceptional Wear Protection Avaliable on selected points
2017 PRODUCT & PRICE GUIDE OCT 2016 - SEP 2017 ALL PRICES RRP AND EXCLUDE GST NEW Super Long Life Extra Tungsten Extra Hardfacing Exceptional Wear Protection Avaliable on selected points Point Boot Kits
More informationLite Lock Mounting Systems Lite Lock Mounting System
BALL QUICK LOCK CHANGE MOUNTING FIXTURING SYSTEM 1 Quick Change Fixturing Ball Lock Mounting System (Inch) Ball Lock for Rotary Indexers... 1.16-1.17 Ball Lock Accessories... 1. Commonly Asked Questions
More informationSAVE THESE INSTRUCTIONS.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions. Every user should read this manual. 2. To protect
More informationDevelopment and performance of the common Keren Stove Yogyakarta, November 2012 March C Pemberton Pigott
Development and performance of the common Keren Stove Yogyakarta, November 2012 March 2013 C Pemberton Pigott 1. Overview: 1.1. The Keren stove is the most common single pot cooking device in Central Java.
More informationNotes, Parts List & Drawings
Biomass Chopper/Cutter Notes, Parts List & Drawings Page 1 of 16 The Easy BioChop biomass chopper/cutter was designed to cut both wet and dry biomass and to accomplish a number of goals. The objectives
More informationget connected with Bradford fittings & valves Bradford Company, Inc
get connected with Bradford fittings & valves Bradford Company, Inc. 800.789.1718 www.bradfordfittings.com Bradford your top quality, sanitary stainless steel fittings & valves manufacturer serving you
More informationSTEEL ROLLERS. 1. FORMERS SUPPORTED ON BOTH SIDES Prevents twisting under heavy loading
102 PLUMBING TOOLS PIPE AND TUBE BENDERS With the IRWIN Hilmor range of tube benders, you can be ready to tackle any job with ease. All machines feature precision tooling to give a smooth, accurate bend
More informationGL 285 Gauzes a buying and using guide
GL 285 Gauzes a buying and using guide Tripods are most often used as supports for gauzes so that containers such as glass beakers and evaporating basins etc can be heated from beneath using a Bunsen burner.
More informationElectric & Electronics
Electric & Electronics Mikron Machining systems for the production of electric and electronic connectors SWISS TRANSFER TECHNOLOGY BY MIKRON 2 Mikron transfer machines for the cost efficient and high volume
More informationCATALOG NOMENCLATURE
CATALOG NOMENCLATURE FIRST ALPHA CHARACTER THIRD ALPHA CHARACTER OVERALL LENGTH L POINT OR BUTTON HOLE SIZES CUSTOM SBR LENGTH, STANDARD ALTERATIONS OR UNIVERSAL SHAPE CODE X MHO 25-090 C P= W=, EXTENDED
More informationRound Die Products www.anchorlamina.com Check our website for the latest technical information. 1 BUSHINGS General Information Bushings... 2 & 3 STANDARD SHOULDER BUSHINGS Bronze Plated & Solid Steel...
More informationLeading Deburring Solutions NEW. Hand Deburring Tool Selector. TheFinishing. Touch
Leading Deburring Solutions NEW Hand Deburring Tool Selector www.shaviv-genius.com TheFinishing Touch S H A V I V S p o t l i g h t SHAVIV Tool Sets SHAVIV tool sets are the most economical, flexible and
More informationVDE 1000V Insulated Tools
Tools Safety Caution 189 Insulated VDE Pliers PM-910 Insulated Wire Stripping Plier Certified to IEC 60900, VDE, DIN 1,000V safety standards and bear GS sign. High visibility molded ergonomic cushion handle
More informationDIAMOND PERFORATED METALS, INC. MANUFACTURERS OF PERFORATED AND EXPANDED METALS STOCK CATALOG. Phone. Fax (800)
IAMON PEORATE METALS, INC. MANUFACTURERS OF PEORATE AN EXPANE METALS STOCK CATALOG Phone (800) 642-4334 Fax (800) 1-6608 Visalia Los Angeles enver Seattle Chicago Houston WELCOME Welcome to iamond Perforated
More informationDrilling. Boring. Reaming. Burnishing. Threading. Solid Carbide & Indexable Thread Mills. Specials. AccuThread 856 ThreadMills USA
rilling oring Reaming urnishing Threading Solid arbide & Indexable Thread Mills Specials ccuthread 856 ThreadMills US Threading Solutions Solid arbide and Indexable Thread Mills ccuthread 856 ThreadMills
More informationWudtools.
+91-8048078748 Wudtools https://www.wudtools.info/ We are one of the noted manufacturers, exporters, suppliers, distributors, wholesalers and traders of a vast selection of Cutting Tools. Our product range
More informationFertilizer Applicator Shanks
Fertilizer Applicator Shanks All shanks are made from 5160 chromium manganese steel, heat treated and tempered to provide over 150,000 psi tensile strength and resistant to memory set. KSC95 Coil spring
More informationTABLE & FURNITURE LEGS
LEGS & LEVELERS TABLE & FURNITURE LEGS Furniture Levelers Furniture levelers from, perfect for entertainment and built-in shelving units. Table Legs The PMI Table Leg line has been very popular for more
More informationREPLACEMENT KNIVES FOR INDUSTRIAL MACHINES.
REPLACEMENT KNIVES FOR INDUSTRIAL MACHINES. The Best Knives on the Planet At its core, Zenith Cutter has been established by selling the best industrial knives in the world for countless make or break
More informationRed-Hot for Tissue. Blades, Knives and Accessories for the Tissue Industry
Red-Hot for Tissue Blades, Knives and Accessories for the Tissue Industry I K S K L I N G E L N B E R G G R O U P T H E K N I F E M A N U FA C T U R E R S DIVISION PAPER Tradition ABOUT US A long tradition
More informationLOOK. CP Test Stations! Your Key to Corrosion Monitoring & Utility Locating. P.O. Box 311 Kearny, N.J
CP_Monitoring_0912AB_Layout 1 9/10/12 5:50 PM Page 1 P.O. Box 311 Kearny, N.J. 07032 201.998.1500 www.cptestproducts.com Your Key to Corrosion Monitoring & Utility Locating LOOK CP Test Stations! CP_Monitoring_0912AB_Layout
More informationKnives, Cutters & Scrapers
Knives, Cutters & Scrapers - 261 - Utility Knives T23216 T232 T23218 Snap-Off Knives SK4 Steel blades Stores up to 3 replacement blades Blade sections snap off providing sharp cutting point Stainless steel
More informationPRODUCT TRAINING MANUAL
PRODUCT TRAINING MANUAL for BRASS PRODUCTS designed for $5.95 TABLE OF CONTENTS Fitting Identification Page Course Outline...........................1 Glossary..............................2-5 Safety Information........................6
More informationSELF-FEEDING FIRE. Overview. What you will need JAMIE & JIMMY S FRIDAY NIGHT FEAST SERIES 6
SELF-FEEDING FIRE JAMIE & JIMMY S FRIDAY NIGHT FEAST SERIES 6 Overview An ingenious self-sufficient design not only keeps campers warm and cosy at night, but it s the perfect low maintenance solution to
More informationPUBLIC LIQUIDATION. Fadal. Liquidation. $10 Million Brand New Fadal Machining Centers And $4 Million Parts Inventory
Fadal PUBLIC LIQUIDATION $10 Million Liquidation 1 Brand New Fadal Machining Centers And $4 Million Parts Inventory Call us at FADAL Now 1-818-678-2271 Once in a lifetime opportunity to purchase new Machining
More informationFÜR LÄNGSTEILANLAGEN FOR SLITTING LINES
ROTARY ROLLSCHERENMESSER SLITTER KNIVES UND AND ZUBEHÖR ACCESSORIES FÜR LÄNGSTEILANLAGEN FOR SLITTING LINES IKS KLINGELNBERG GROUP THE KNIFE MANUFACTURERS DIVISION METAL ABOUT US A long tradition signifi
More informationWIDESPREAD LAVATORY MODELS WITH HI-ARC SPOUT
5951, 5961, 5981, 5983, 5993 SERIES MT122B INSTALLATION INSTRUCTIONS THESE INSTRUCTIONS MUST BE LEFT WITH HOMEOWNER WIDESPREAD LAVATORY MODELS WITH HI-ARC TRADITIONAL CROSS NOTE: Handle Inserts are not
More informationCounter Display Items
1/4" Dr. x 3/8" Dr. Dual Drive Stubby Ratchet Part No. 640923 Dual drive 2 in 1 design Compact size is great for fasteners in tight areas Black composite coating with TPR injection handle for comfort 272504
More informationCOVER 2016 FEDERAL GOVERNMENT SPOTLIGHT. Milwaukee Delivers Performance and Productivity for the Government of Canada
COVER 2016 FEDERAL GOVERNMENT SPOTLIGHT Milwaukee Delivers Performance and Productivity for the Government of Canada Hand Tools Standing Offer # E60HP-16/001/HP THE WORLD LEADER IN CORDLESS INNOVATION
More informationAirworthiness Directive
Airworthiness Directive AD No.: 2018-0150 Issued: 16 July 2018 EASA AD No.: 2018-0150 Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation (EC) 216/2008 on behalf
More information224 Flash Professional Series Sharakumono Series DP3 Series DP Damascus Series Traditional Japanese Series Traditional Chinese Series
223 224 For over one thousand years, Japanese sword and knife makers have been renowned for crafting the world's sharpest, hardest, and most refined blades. Tojiro, one of Japan's top knife makers, still
More informationItem no. Description Packaging Pack Qty EAN Item no. Description Packaging Pack Qty EAN PSKBEM Soft Touch Universal Knife Block
Knife Storage You don t become the knife experts without knowing a thing or two about knife blocks! A range of knife storage options for every budget. Safe, flexible and universal storage for your knives
More informationContents. Company Background FLOWSTOPPER Plugging Device Kit and Replacement Parts Key Features & Benefits... 4
Contents Company Background... 2 FLOWSTOPPER Plugging Device Kit and Replacement Parts... 3 Key Features & Benefits... 4 Frequently Asked Questions... 5 Step by Step Instructions... 6 FLOWSTOPPER Warranty...
More informationPINS & BUSHINGS INCH
www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH Steel, Bronze & Self-Lubricating Friction & Ball Bearing Components www.danly.com PINS & BUSHINGS INCH Strategically located to serve
More informationAdditional Support Underneath the Tank Compartment Floor
Additional Support Underneath the Tank Compartment Floor Reading in recent discussions about the sagging of the tank compartment floor caused me concern so I decided to check the condition of my coach's
More informationSmoke House. What you will need. Personal protective equipment
Smoke House What you will need Several planks of tongue and groove floorboards (18mm by 119mm) Do not use any treated wood Wooden battens (18mm by 44mm) for edging the doors. Wooden battens (34mm by 34mm)
More informationOperation Manual SUPER BEAST Multi-tool SC-11M-10
Operation Manual SUPER BEAST Multi-tool SC-11M-10 Technical Specifications General Safety/Operating Instructions Attaching/Changing the Head Using the SUPER BEAST as a Cutter Using the SUPER BEAST as a
More informationTable of Contents. Riser Rings. Riser Rings. Riser Rings. Product Description Page
Riser Ring Catalog Table of Contents Riser Rings Product Description Page Riser Rings Steel And Cast Iron Riser Rings Adjustable Riser Rings Steel Manhole Riser Rings Steel Catch Basin Riser Rings Steel
More informationRIGGING & TRADESHOW SUSPENSION APPLICATIONS
RIGGING & TRADESHOW SUSPENSION APPLICATIONS VOLUME VI 1 GRIPLOCK SYSTEMS Griplock Systems has been providing manufacturers and contractors with the world s highest quality and most reliable cable suspension
More informationWAREHOUSE CATALOGUE SEAMLESS ALUMINIUM GUTTERS.
WAREHOUSE CATALOGUE SEAMLESS ALUMINIUM GUTTERS www.longspangutters.com Gutter Coil Domestic Industrial 285x0.6mm aluminium 355x0.6mm aluminium 381x0.8mm aluminium 448x0.8mm aluminium Gutter Run-off Domestic
More informationPole Line Hardware. Catalog
Catalog Table of Contents Anchor Rods... 3 Expanding Anchors... 3 Pole Bands... 4 Adjustable Pole Bands... 4 Connecting Links... 4 Malleable Guy Clips... 4 Shackles... 5 Crossarms... 5 Steel Braces...
More informationOur innovative and patented tools make installing belt fasteners easy and effective.
Universal Tools Patented Technology Our innovative and patented tools make installing belt fasteners easy and effective. Whether you are installing Plategrip bolt fasteners, Riv-Nail rivet fasteners, Staplegrip
More information