Flat Deck Roof Rack Systems

Transcription

1 Flat Deck Roof Rack Systems New Concept of Safer and more Convenient HD Roof Racks A great concept of flat deck construction using a unique HD aluminium extrusion provides many benefits over conventional design roof racks. The aluminium slats that form the floor have a channel that allows almost unlimted mounting options to ensure loads are independently secured rather than via use of ropes, straps or nets etc. These channels are present on both the upper and lower faces of the roof rack cross bar slats meaning accessories and equipment can be secured either side of the flat deck. Extra height legs/feet are usually available to create more room under the rack for accessories such as Ladders, S/Steel Camping Tables and Solar Panel mounts. With no side rail necessary due to each item being secured independently, the loading height is reduced. This offers improved access to car parks and off-road plus reduces wind drag (better fuel consumption) By securing items seperately as distinct from using boxes or crates, lifting weights can be reduced. Using latches and bolts to secure items avoids the risks of poorly secured loads due to poor knots or tie down straps becoming loose etc. A wide range of standard accessories are available together with mounting solutions for almost any vehicle.

2 Rack Length (Metres) E 3.2 Basket Code J L A B P Q K U C D E N O I R R-01 F G M H Z V Basket Dimensions W) (L x Additional Information Kit Components or Notes 930 x x x x x x x 1225 Vehicle / Application Toyota 100 Series TM, Feet Kit A or Ae Series TM, Feet Kit A or Ae & 80 Series Leg Kit C Troopie Legs x 190mm+ & CM Series Cab Only Legs - 130mm Wagon (LP Wind Def) Legs x 130mm Prado 2003 On TM, Kit A or Ae Prado pre 2003 Legs Kit C Hilux Dual Cab 2005on TM, Kit A or Ae 900 Nissan Nissan GQ & GU Leg Kit C Nissan X-Trail pre'07 Custom Mnt Kit 820 Mitsubishi Pajero LWB (with OE Rails) Grab Feet 1105 Pajero LWB (No Gutter) TM, Kit A or Ae Pajero NH-L (Gutter Mnt) Legs 170x4 & 190x Landrover Discovery 1 & 2 Legs or 290mm Discovery 3 & 4 TM, Custom Mnts Defender 90 & 130 Legs or 245mm 895 Defender 110 Wagon Legs or 245mm Holden/Hyundai/Honda Hyundai Terracan Custom Mnt Kit 1240 Honda CRV pre07 Custom Mnt Kit 860 Jackaroo TM, Kit A or Ae 1260 Other Jeep G/Cherokee pre05 TM, Kit A or Ae 1420 Jeep G/Cherokee 05+ TM, CM 965 Mercedes Benz ML Grab Feet 835 VW Touareg Grab Feet 1105 Ute Canopy (Most) TM, Kit A or Ae 900 Ute - Dual Cab on Roof TM, Kit A or Ae 900 Sprinter/VW Van Lo Roof Legs x 120mm Notes & Codes: Wind-Cheetah Roof Racks - Fitting Guide & RRP ( v11) (Prices are plus Freight) Note: Please ask about other Vehicle Makes/Models or size combinations. We are constantly expanding the range x 1400 RED = Recommended Size Basket; BLUE = OK to Fit; CM = Custom Mounts; TM = Track Mount (sized to suit); Std Basket 50mm High Kit A = 2x45 & 4x55 Feet; Kit Ae = 2x55 & 4x65 Feet; Kit B = 6x120 Legs; Kit C = 4x120 & 2x130 Legs (Legs Range in Height from mm) 1734 x x x x x x x x x x x x x x

3 Roof Rack Accessories Axe Mount Bracket Bolts to the side rail of a WindCheetah Roof Rack or can be adapted to other racks and applications. Axe head is protected in lockable steel cage and can be blade up or down. Handle is drilled and secured with bolt and wing nut as supplied in the kit. Eye Bolts (Pair) Used to lock into the channel in any WindCheetah rack cross slat. Easily relocated to secure unusual loads where a specific mounting accessory is not available. Sold as Pairs Item No: RMAAM Item No: RMAEB Rod or Ski Holder Gas Bottle Holders Stainless Steel Two sizes to suit 220mm Diam. or 258mm Diam. bottles 425 mm wide opening Strong and lockable with soft rubber jaws. Suit Fishing Rods or Skis etc. Supplied in Pairs (padlock not included) Item No: RMAFRH Jerry Can Holder Vertical Mount Quick clamp and lockable to secure to Wind-Cheetah Roof Rack or other flat surface. Suits most plastic or metal jerry cans Quick clamp and lockable to secure Gas Bottle to WindCheetah Rack or other flat surface. Item Nos: RMAGB220 suit 220mm RMAGB258 suit 258mm Jerry Can Holder For 2 x 20 Lt Jerry Cans (steel or plastic) Base bolts to WindCheetah rack or other Flat Surface. Clamp section easily unclips when not needed to ensure low profile roof rack. Also avail in Single design Item No: RMAJCV Item No: RMAJCD Jerry Can Holder Hi-Lift Jack Holder For Single 20 Lt Jerry Can (steel or plastic) Base bolts to WindCheetah or other Flat Surface. Clamp section easily unclips when not needed to ensure low profile roof rack. Secures to side rail of WindCheetah or can be adapted to other racks or installations Lockable 2 Pieces in each Kit Also avail in Double design Item No: RMAJCS Note: Gas Bottles, Axe, Jerry Cans not included and are for illustration purpose only Item No: RMAJM

4 Roof Rack Accessories Wheel Step / Ladder Toyota 76 Wagon Ladder (Aluminium) Quickly attaches to any rear mounted Spare Wheel using ratchet strap supplied in kit. Fits to small door. Hangs over top lip and bolts behind the number plate light bracket. Allows simple access to Roof Racks. (No drilling required) Steel frame with Alloy non slip tread plates. Item No: RMAL-09 Item No: RMAL-01 Ladder suit Land Rover Discovery 3 Ladder Clip On Aluminium Height: 1550 mm Extension: 200 mm Aluminium Top clips over Rail of WindCheetah Roof Rack and is rubber lined to avoid marks. Base extension swivels out & rest against tyre or bumper etc. Item No: RMAL-08 Item No: RMAL-02 Ladder 2 Pce suit Land Rover Defender Ladder suit Land Rover Discovery 1 & 2 Top section fits alongside rear door. Aluminium. Fits to rear door allowing easy access to the roof rack. Lower section (1 step) mounts to Chassis Fits all Defenders including 2007on model (as pictured) Item No: RMAL-05 Item No: RMAL-06 Ladder Slides under WindCheetah Rack Driving Light or Aerial Mount This ladder is similar to the Clip-on (RMAL-02) except is provided with slides to fit under any WindCheetah basket over 2.2 met s long. Allows easy mounting to front or rear of WindCheetah basket for Driving Lights or radio Aerial. No drilling required, can be located anywhere across the width of the basket. Not suitable for baskets shorter than 2.2 met. Item No: RMAL-07 Std colour is Black Item No: RMASB

5 Roof Rack Accessories Roof Tent Mount Kits Set of 4 stainless steel spacer brackets to mount most Roof Tents to a WindCheetah Std basket. 2 heights available 33 mm (Z Shape) or 57mm (U Shape) Bolts included 33mm No: RMARTM1 57mm No: RMARTM2 Roof Tent Quick Fit Kit Allows quick and easy fitting and removal of roof tent. Designed for Featherlite Roof Tent on WindCheetah roof rack. May be adapted to other applications Item No: RMARTRM Rubber Mount Universal Applications Use to secure Shovel handles and other round attachments to Roof Racks and Ute Trays etc. 3 Sizes Available, each has adjustment of 10-20mm 20mm No: CSQF20 40mm No: CSQF40 80mm No: CSQF80 Shovel Mount Bracket Bolts to side rail of WindCheetah Basket. 2 Piece to securely mount shovel with a D handle Metal and Lockable Item No: RMASM Camping Tables Fold to just 28mm Slides Kit Stainless Steel top and aluminium frame. Strong easy to clean camping table that slides. Pair of Z shape slide rails to secure Camping Table or Solar Panels etc under a Rackmaster basket Folds flat (28mm high) and can slide under Rack basket for storage. 2 Sizes Available 750x1150mm No: RMAT1 550x1150mm No: RMAT7 Side Mount Slides Adaptor Kit Set of adaptors to allow the Slides Kit (RMAT4) or other accessories to be bolted in between cross slats. Rivet in place for a mid mounting point. Stainless Steel (set of 4) Item No: RMAT2 Adjustable width when used in Front or Rear of basket. For side mount also require adaptor kit to give correct spacing (RMAT2) Item No: RMAT4 Wheel Mount Bracket Bolts to floor of WindCheetah basket to secure spare wheel. HD, adjustable and Lockable. (padlock not included) Also available as Low Profile version. Item No: RMAWM or: RMAWMF (low mount)

6 Roof Rack Accessories Kayak Holder Transit Bags HD Canvas Storage Bag for Roof Rack mounting. Ideal for use with Gomo or Wolfpakk boxes. Set of 4 padded wedge shaped mounts that can be quickly adjusted in width to suit any Kayak. 500mm wide x 300mm high Also suitable for some other water craft and applications. Handles each end allow bag to be loaded on ground and lifted onto rack. Set of 4, Includes Bolts Item Nos: RMATB10 (1050mm) RMATB12 (1200mm) Item No: RMAKH Storage Box - Wolf Pack Storage Box - Gomo Width: 320 mm Depth: 440 mm Height: 210 mm Width: 400 mm Depth: 510 mm Height: 235 mm HD Plastic Box. HD Plastic Box. Stackable. Ideal for 4WD storage applications and in roller drawer systems. Removable Lid Locks with 4 Sliding Catches Item No: RDBOX Cargo Net for Roof Racks Ideal for 4WD storage applications, on roof racks or inside the Transit Bags Removable Lid locks with 4 Flip Over Catches Item No: RDBOXWP Rope Net for Roof Racks, Utes or Trucks 900mm x 1100mm With 14 PVC Tie Down Buckles, adjustable to secure load firmly 3m x 5m (Can be cut down to suit application) Ideal for couriers or other applications with variable loads. Non stretch HD webbing 200mm squares, 7mm rope, 160kg rating per rope Item No: OLCN Item No: OLNET Wheel Tie Down Rubber Tie Down Strap Ratchet strap with 3 legs and HD 25mm ratchet. Use on Roof Rack or any other Tie-Down application Can mount around most brands of roof rack rails or to Eye Bolts when used in a Wind-Cheetah rack. Adjustable mm SWL of one Strap = 23 Kg 3 Mounting holes to secure with screws or bolts, including to WindCheetah rails Item No: CSQFS200 Item No: OLWTD

7 Roof Rack Mounting Systems Gutter Mount Leg Uses hi-tensile aluminium Stainless Steel clip to secure under Gutter. SS grub screw locks the SS adjuster bolt at correct tightness Heights available (mm): 120; 130; 155; 170; 180; 190; 205; 225; 270 & 290 Item No: RMXL??? (Sold per each leg) Foot suit Tracks All Stainless Steel Height adjustable to 15mm 2 bolts secure under Rack 2 bolts and slide nuts into Track Heights available (mm): 45; 55; 65; 75 and custom to suit special applications. Item No: RMXF?? (Sold per each foot) Tracks (Pr) Aluminium HD Available in custom length kits (Pairs) to suit most popular 4WD s. Some stock lengths also available. Includes rubber seal. Custom fitments include bolts to secure to roof captive nuts or Riv-nuts as needed Item No: RMT?? (Sold as a Pair) Demountable Rails Stainless Steel sitting in a thick rubber cushion to spread the load over the roof skin. Secures to the hidden gutter by long clips. Only available for a few fitments (Dual Cab Utes) Item No: RMXDM?? (Sold as a Pair and available to Special order only) Ute Mount Leg Uses hi-tensile aluminium Extended Leg designed to mount either WindCheetah Basket or Cross Bars across a Ute Well Body Ideal for mounting a Roof Tent over ute body so tent is no higher than cab roof Height: 270 mm Item No: RMXLU270 Grab Foot (S Steel) Designed to fit to OE Roof Rails. Provides a strong and low profile mounting to factory fitted roof rails, thus reducing the overall height of the rack Adjustable to suit most factory fitted rails. Item No: RMXFG (Sold per each Foot) Adaptor Channels Adaptors channels to allow a Wind-Cheetah roof rack basket or Cross Bars to be used with Rhino Rack Legs or CXB Mounts Includes Bolts Length: 295 mm Width: 40mm Height 17mm HD Alloy Track Supplied in vehicle specific pairs including rubber seal and fasteners (where applicable). Also available in Universal Kit to suit unlisted fitments Item No: RMT?? Item No: RMXLRL (Sold as a Pair)

8 Wind Cheetah Roof Rack Land Rover Discovery 3 & 4 Available in 1.6 m and 2.2 m lengths. Flat Deck design lowers wind drag and is ideal for Roof Tents. No holes to be drilled, fits to existing captive nuts in roof using either the genuine Land Rover tracks or our HD WindCheetah tracks (specify tracks to be used when ordering) The aluminium slats that form the floor have a channel that allows almost unlimted mounting options to ensure loads are independently secured rather than via use of ropes or nets etc. A wide range of Accessories is available including, Jerry Can carriers, Spare Wheel Mount, Rack Bags, Shovel & Axe Holders, Gas Bottle holders, Poly Water Tanks, Roof Tents, Side Awnings, etc.

9 Toyota Prado 03 on Flat Deck Roof Rack Systems New Concept of Safer, more Convenient HD Roof Rack Available in 1.8 m, 2.0 m and 2.2 m lengths Low Sides for less Wind Drag and Better Fuel Economy Easier Access into Carports and Parking Lots Powder Coat Aluminium for Maintenance Free finish The aluminium slats that form the floor have a channel that allows almost unlimted mounting options to ensure loads are independently secured rather than with the use of ropes, straps or nets etc. A wide range of Accessories are available including:jerry Can carriers, Spare Wheel Mount, Gas Bottle Holders, Water Tanks, Rack Bags, Shovel & Axe Holders, Roof Tent Mounts, Spotlight or Aerial Mounts, etc.