FIREPIT MODEL # SRFP153

Transcription

1 ITEM # FIREPIT MOEL # SRFP53 Français p. 9 Español p. 7 ATTAH YOUR REEIPT HERE Serial Number Purchase ate Questions, p roblems, missing pa rts? e fore retu rning to your retaile r, call our customer service depa rtment at , 8 a.m. - 8 p.m., EST, Monday - Friday.

2 PAKAGE ONTENTS G A E F PART A ESRIPTION Screen hook Screen harcoal grid Fire bowl QUANTITY PART E F G ESRIPTION QUANTITY owl support ase PV cover 2

3 HARWARE ONTENTS (shown actual size) AA EE M6 Ring Screw Qty. M6 Flange Nut Qty. M6 Nut Qty. 3 M6 Wing Nut Qty. 3 M6 x 70 mm olt Qty. 3 3

4 SAFETY INFORMATION WARNING: FOR OUTOOR USE ONLY o not use the firepit indoors. arbon monoxide fumes, due to lack of ventilation, can cause death. o not use gasoline or kerosene to start fires in the firepit. Keep all flammable liquids away from the firepit. This unit is designed to burn charcoal and untreated wood only. Fill the bottom of the bowl with sand until the surface of sand is 0.2 inches below the grid. o not use under or on combustible structures/surfaces including wooden decks. Use protective gloves and long-handled tools with this firepit. ispose of packaging materials properly. Keep children away from hot firepit. Firepit remains very hot for a period of time after using. e sure firepit is cool before attempting to move it. o not place the PV cover too close to firepit when it s burning. o not place hot particles inside the PV cover. o not burn over.6 lbs. of charcoal or 3 lbs. of untreated wood at one time. The handle of the tools may become hot during and after use. The firepit should be placed no closer than 24 in. from walls during use. on t touch the ash tray handle during use until the fire is completely out and cooled down. AUTION: Assemble the firepit on a non-abrasive surface. PREPARATION efore assembling product, make sure all parts are present. ompare parts with package contents list and hardware contents above. If any part is missing or damaged, do not attempt to assemble the product. ontact customer servicefor replacement parts. Estimated Assembly Time: 5 minutes Tools required for assembly (not included): Phillips screwdriver, adjustable wrench 4

5 ASSEMLY INSTRUTIONS. Attach M6 ring screw (AA) to the top of the screen () with M6 flange nut (). AA Hardware Used AA M6 Ring Screw x M6 Flange Nut x 2. onnect bowl support (E) and base (F) with M6 x 70 mm bolts () and M6 nuts (). 2 Hardware Used M6 x 70 mm olt x 3 E x 3 M6 Nut F 5

6 ASSEMLY INSTRUTIONS 3. Fix fire bowl () to assembled base with M6 Wing Nut (EE). 3 EE Hardware Used EE M6 Wing Nut x 3 E F 4. Place charcoal grid () on top of fire bowl () followed by screen () and screen hook (A). 4 A 6

7 ARE AN MAINTENANE Inspecting Inspect this firepit on a regular basis to ensure product safety and longer product life. O NOT attempt to inspect this outdoor firepit until the fire is OMPLETELY out and cooled down. heck handles to make sure they are secure. heck components for any signs of damage or rust. If any component is damaged, do not operate until repairs are made. leaning lean this outdoor firepit on a regular basis to promote safer use and longer product life. Note: After repeated use, the finish may discolor slightly. O NOT attempt to clean this outdoor firepit until the fire is OMPLETELY out and cooled down. O NOT use oven cleaner or abrasive cleaners as they will damage this product. O NOT clean any part of this outdoor firepit in a self-cleaning oven as it may damage this finish. Wipe exterior surfaces with a mild dishwashing detergent or baking soda. For stubborn surfaces use a citrus-based degreaser and a nylon scrubbing brush. Rinse clean with water. Remove built-up creosote from components with a chimney cleaning product. Storage O NOT move or store this outdoor firepit until the fire is OMPLETELY out and cooled down. Once the fire is out, coals are cold and outdoor firepit is cool to touch, remove ashes and properly dispose. over outdoor firepit with the PV cover (G). Store in a location away from children and pets. Note: If you do not use a cover, store this outdoor firepit in a dry location to maximize product life. ONE-YEAR LIMITE WARRANTY item For warranty service, call , 8 a.m. - 8 p.m., EST, Monday - Friday. 7

8 REPLAEMENT PARTS LIST For replacement parts, call our customer service department at , 8 a.m. - 8 p.m., EST, Monday - Friday. PART AA EE ESRIPTION M6 Ring Screw M6 Flange Nut M6 x 70 mm olt M6 Nut M6 Wing Nut Screen harcoal grid Fire bowl PART # 9765-HW AA EE 8 Printed in hina