Sunjoy D-DNC492PST 3-Seat Striped Adjustable Tilt Canopy. Wicker Metal Swing. Owner s Manual IMPORTANT

Size: px

Start display at page:

Download "Sunjoy D-DNC492PST 3-Seat Striped Adjustable Tilt Canopy. Wicker Metal Swing. Owner s Manual IMPORTANT"

Ralph Lindsey
5 years ago
Views:

1 Sunjoy D-DNC492PST 3-Seat Striped Adjustable Tilt Canopy Wicker Metal Swing Owner s Manual IMPORTANT Thank you very much for choosing Sunjoy Group. Please take time to read these instructions thoroughly and follow each step carefully for safe and easy operation. Keep this manual for future reference. We would like to hear from you with any comments or suggestions. You can call us toll-free at from 8:00 a.m. EST to 8:00 p.m. PST. You can also send the to amazon@sunjoygroup.com or visit to get tech. assistance or to place your replacement part order form. Made in China 1 / 6

2 Cautions: 1. Repeated assembly can weaken the locking ability of the nuts. Periodically check all bolted connections on your furniture to make sure they are tight and secure. Retain these instructions for future reference 2. Keep all children and pets away from assembly area. Children and pets should be supervised while product is being assembled. 3. This swing must be assembled by two adults or more. 4. Do not over tighten any of the nuts as this may DAMAGE the threads. Tighten each nut firmly. 5. Ensure that the nuts are not cross-threaded, hand tighten before commencing. 6. Take additional care when using this product on hard and polished surfaces. 7. Always use on level ground, ensuring leg remains in contact with the ground. 8. Do not place your chair in wet conditions where there is a risk of rust developing. 9. When not in use, wipe free of any dirt or loose objects, do not use strong detergent or abrasive cleaners. 10. When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water; rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners, then store in a cool, dry location away from sunlight. 11. Keep canopy swing away from fire or inflammable objects. 12. WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. This tent is made with fabric that meets CPAI-84 specifications for flame resistance. It is not fire proof. The fabric will burn if left in continuous contact with any flame source. Assembly Instructions: Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish. Inside this carton you will find enclosed hardware and parts listed above. Please check the contents of this package to ensure you have received all of the required parts, and that there is no breakage. Parts identification: For ease of identification, all parts are labeled to correspond to the Step number in which the part is used Made in China 2 / 6

3 Parts List Part# Description QTY A Front foot 2 B Back foot 2 C Back support bar 1 D Side support bar 2 E Top beam 1 F Seat 1 G Chair back 1 H1 Right armrest 1 H2 Left armrest 1 I1 Swing bar 1 2 I2 Swing bar 2 2 J Top side support bar 2 K Canopy 1 L Top connect bar 2 M Seat cushion 1 N Back cushion 1 O Pillow 2 Hardware Pack NO. Description Qty AA M6 plastic cap 17 BB Bolt M8*85 4 SS Bolt M6*75 4 RR Bolt M6*80 2 CC M6 flat washer 23 DD M6 nut 6 EE Bolt M6*48 11 HH M8 plastic cap 4 KK M8 flat washer 8 LL M8 nut 4 FF Hook 2 GG Adjust bolt (plastic) 2 II Hex key 1 JJ Wrench 1 Made in China 3 / 6

4 Step 1: Insert Top beam (E) into Front foot (A), as Fig.1. Fix Front foot (A) & Back foot (B) and Top beam (E) & Back foot (B) by using bolt (BB), washer (KK) and nut (LL), then cover Plastic cap (HH), as Fig.2. Connect Back foot (B) and Back support bar (C) by using bolt (SS), washer (CC) and nut (DD), then cover Plastic cap (AA), as Fig.3. Step 2: Connect Side support bar (D), Back foot (B) and Back support bar (C) by using bolt (RR), washer (CC) and nut (DD), then cover Plastic cap (AA), as Fig.4. Connect another end of Side support bar (D) and Front foot (A) by using bolt (SS), washer (CC) and nut (DD), then cover Plastic cap (AA), as Fig.5. Step 3: Connect Seat (F) and Chair back (G) by using bolt (EE) and washer (CC), then cover Plastic cap (AA). Step 4: Connect Right armrest (H1), Seat (F) and Chair back (G) by using bolt (EE) and washer (CC), then cover Plastic cap (AA). Assemble Left armrest (H2) in same way. Made in China 4 / 6

5 Step 5: Hang Swing bar (I1 & I2) to Right armrest (H1) and Left armrest (H2). Step 6: Hang Swing bar (I1 & I2) to Top beam (E) by Hook (FF). Step 7: Connect Top side support bar (J) to Top beam (E) by Adjust bolt (GG), do not tighten the bolt. Step 8: Insert Top connect bar (L) into Canopy (K). Step 9: Insert Top side support bar (J) to Top connect bar (L), and then tighten the Adjust bolt (GG). Step 10: Stretch the canopy to fit. Place Seat cushion (M), Back cushion (N) and Pillow (O) on the seat. Made in China 5 / 6

6 Care & Maintenance: Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings are scratched. This is not a defect and thus not covered by the warranty. To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint. Should any scratching or damage occur, we recommend immediate touch-up with rust inhibiting paint. Surface rust can also be easily removed with a very light application of common cooking oil. If surface oxidation (rusting) occurs and if no measure is taken to prevent this, the oxidation may start dripping onto deck or patio and caused damaging stains, which may be difficult to remove. This can be prevented if the above-mentioned measures are taken to keep the product from oxidizing. Limited Manufacturer s Warranty: This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the item is maintained with care and used only for personal, residential purposes. The item is warranted to be free from defects in material or workmanship for a period of One (1) Year. We don't reimburse for transportation or delivery costs, or compensate the individual or any outside party for assembling or disassembling the product. Exclusions: Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items will be in the original style and color, or a similar style and color if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, and you may also have other rights, which vary from state to state. Made in China Made in China 6 / 6

Sunjoy L-GZ933PST 12 X 10 Cabin-Style Soft Top Gazebo with Mosquito Netting. Owner s Manual IMPORTANT

Sunjoy L-GZ933PST 12 X 10 Cabin-Style Soft Top Gazebo with Mosquito Netting Owner s Manual IMPORTANT Thank you very much for choosing Sunjoy Group. Please take time to read these instructions thoroughly