Instrumentation Pipe Fittings

Size: px

Start display at page:

Download "Instrumentation Pipe Fittings"

Rudolf Carpenter
5 years ago
Views:

1 Instrumentation Fittings 1

Instrumentation Fittings 1FM to Male dapter 1FP ap 1FPRU Reducer

1HRN Hex Reducing Nipple 1MPP Male Plug 1RFM Reducer dapter to Male

Elbow 72 2FMR Male Reducer Elbow 73 2MM Male Elbow 73 3FFF ll Elbow

2 Instrumentation Fittings 1FM to Male dapter 1FP ap 1FPRU Reducer Union 1FPU Union 1HLN Hex Long Nipple HN Hex Nipple 1HRN Hex Reducing Nipple 1MPP Male Plug 1RFM Reducer dapter to Male 1RMF Reducer ushing Male to FF Elbow 72 2FM Male Elbow 72 2FMR Male Reducer Elbow 73 2MM Male Elbow 73 3FFF ll Elbow 73 3FFM 3FMF 3MMM 4FPR Tee Male 74 Tee Male 74 ll Male Tee 74 ross 74 2

3 Instrumentation Fittings Instrumentation Fittings Tylok Instrumentation Fittings are offered in popular configurations such as reducing adapters, reducing bushings, pipe unions, elbows, tees, crosses, etc. Fittings are manufactured to the same high quality standards as other Tylok Fittings. Each fitting is thoroughly cleaned to eliminate system contamination and features an attractive surface finish to enhance the appearance of modern scientific instrumentation and equipment. Fittings are manufactured from materials meeting applicable STM or SME specifications, with pipe threads which meet or exceed NSI/SME requirements. Strict quality controls procedures are followed throughout production. thread connections are very common in today s industry. They are relatively easy to work with because of the common sizes and dimensions throughout manufacturing. It is important to use a thread sealant. These products range from pipe dopes to Teflon tape, all of which can be purchased through your local Tylok Distributor. Design/Features Tylok Instrumentation Fittings are manufactured to the same high quality standards as other Tylok Fittings. Each fitting is thoroughly cleaned to eliminate system contamination and features an attractive surface finish to enhance the appearance of modern scientific instrumentation and equipment. Technical Support & Training Tylok Instrumentation Inc. ensures all of its Distributors are trained on the proper installation of fittings and valves. Tylok Distributors are trained to provide the technical support you deserve. dditionally, our Distributors will help in finding solutions for specific applications. ontact your local Tylok Distributor for further information. Quality Management System SI Global has registered Tylok International s Quality Management System to ISO The quality system complies with the international standard ISO 9001 and its technical equivalent, NSI/ISO/SQ Tylok strives to continuously improve the effectiveness of the Quality Management System. 3

4 How to Order Tylok Instrumentation Fittings are ordered as listed in this catalog by inserting the material code before the part number. Tylok Instrumentation Fittings can be identified through the part number as to material, pipe size, configuration, and thread connection. The part number describes a complete fitting. The size nomenclature to describe a tee fitting is from left (1) to right (2) and down (3). Special onfigurations available upon request. SS 6 1 RFM 4 Material Style Description Odd End hart 1 hart 2 hart 3 hart 4 hart rass SS Stainless Steel S Steel hart 3 Style 1 Straight 2 Elbow 3 Tee 4 ross Thread Thread ) SPP/SPT 1/1627 1/1628 1/827 1/828 1/418 1/419 3/818 3/819 1/214 3/ /2 1/214 3/ hart 4 Description hart 4 Description 1FM 1FP 1FPRU 1HLN 1HN 1HRN 1MPP 1RFM 1RMF To Male dapter ap Reducer Union Hex Long Nipple Hex Nipple Hex Reducing Nipple Male Plug Reducer dapter to Male Reducer ushing Male To 2FF 2FM 2FMR 2MM 3FFF 3FMF 3MMM 4FPR 1MDF Elbow Male Elbow Male Reducer Elbow Male Elbow ll Tee Tee Male ll Male Tee ross Mud Dauber Fitting 4

5 1FM, 1FP, 1FPRU 1FM to Male dapter. 21FM 1/8 1/ /16 41FM 1/4 1/ /4 61FM 3/8 3/ /8 81FM 1/2 1/ /16 121F M 3/4 3/ /16 161F M /8 HEX Male 1FP 21FP 1/ /16 41FP 1/ /4 61FP 3/ /8 81FP 1/ /16 121FP 3/ /16 161FP /8 ap 1FPRU Reducer Union 41FPRU2 1/4 1/ /4 61FPRU4 3/8 1/ /8 81FPRU2 1/2 1/ /16 81FPRU4 1/2 1/ /16 81FPRU6 1/2 3/ /16 121FPRU4 3/4 1/ /16 121FPRU8 3/4 1/ /16 161FPRU8 1 1/ /8 16 1FPRU12 1 3/ /8 5

6 1FPU, 1HLN, 1HN 21FPU 1/ /16 41FPU 1/ /4 61FPU 3/ /8 81FPU 1/ / FPU 3/ / FPU /8 Hex 1FPU Union 1HLN Male 21HLN 1/ /16 41HLN 1/4 Made.281 9/16 6 1HLN 3/8 To Order /16 He x Long Nipple 81HLN 12 1HLN 16 1HLN Hex 1/2 Specify.468 7/8 3/ / /8 11HN 21HN 41HN 61HN Male 1/ /8 1/ /16 1/4 81HN 1/ /16 3/ / /8 121HN 3/ /16 161HN 1 Hex /8 1HN Hex Nipple 6

1HRN, 1MPP, 1RFM 1HRN Hex Reducing Nipple 21HRN1 41HRN2 61HRN2 61HRN4 1/8 1/4 3/8 3/8 1/16 1.000.125 7/16 1/8 1.187.187 9/16 1/8 1.218.1871 1/16 1/4 1.406.281 11/16 81HRN2 1/2 1/8 1.406.187 7/8 81HRN4 1/2 1/4 1.

7 1HRN, 1MPP, 1RFM 1HRN Hex Reducing Nipple 21HRN1 41HRN2 61HRN2 61HRN4 1/8 1/4 3/8 3/8 1/ /16 1/ /16 1/ /16 1/ /16 81HRN2 1/2 1/ /8 81HRN4 1/2 1/ /8 81HRN6 1/2 3/ /8 121HRN4 3/4 1/ /16 121HRN8 3/4 1/ /16 161HRN4 1 1/ /8 161HRN8 1 1/ /8 161HRN12 1 3/ /8 No. 11MPP 1/ /8 21MPP 1/ /16 41MPP 1/ /16 61MPP 3/ /16 81MPP 1/ /8 121MPP 3/ /16 161MPP /8 1MPP Male Plug 1RFM Reducer dapter to Male 21RFM1 1/8 1/ /16 41RFM2 1/4 1/ /4 61RFM2 3/8 1/ /8 61RFM4 3/8 1/ /8 81RFM2 1/2 1/ /16 81RFM4 1/2 1/ /16 81RFM6 1/2 3/ /16 121RFM4 3/4 1/ /16 121RFM6 3/4 3/ /16 121RFM8 3/4 1/ /16 161RFM4 1 1/ /8 161RFM8 1 1/ /8 161RFM12 1 3/ /8 *Note: ll dimensions subject to change, to be used for reference only. 7

8 1RMF, 2FF, 2FM Male Reduced Hex 21RMF1 1/8 1/ /16 41RMF2 1/4 1/ /16 61RMF2 3/8 1/ /16 61RMF4 3/8 1/ /4 81RMF2 1/2 1/ /8 81RMF4 1/2 1/ /8 81RMF6 1/2 3/ /8 3/4 1/ /16 6 3/4 3/ /16 8 3/4 1/ / RMF4 1 1/ /8 16 1RMF6 1 3/ / / /8 161RMF12 1 3/ /8 1RMF Reducer ushing Male to 2FF Elbow 22FF2 1/ FF4 1/ FF6 3/ FF8 1/ FF12 3/ s 2FM1 1/ FM2 1/ FM4 1/ FM6 3/ FM8 1/ FM12 3/ FM FM Male Elbow 8

2FMR, 2MM, 3FFF 22FMR1 1/8 1/16.750.750.125 42FMR2 1/4 1/8.843.937.187 62FMR4 3/8 1/4 1.062 1.062.281 82FMR4 1/2 1/4 1.125 1.250.281 82FMR6 1/2 3/8 1.125 1.250.375 2FMR Male Reducer Elbow 2MM Male Elbow 22MM2 1/8.

9 2FMR, 2MM, 3FFF 22FMR1 1/8 1/ FMR2 1/4 1/ FMR4 3/8 1/ FMR4 1/2 1/ FMR6 1/2 3/ FMR Male Reducer Elbow 2MM Male Elbow 22MM2 1/ MM 4 1/ MM 6 3/ MM 8 1/ MM 12 3/ MM FFF 23FFF2 1/ FFF4 1/ FFF6 3/ FFF8 1/ FFF12 3/ FFF ll Tee 9

3FFM, 3FMF, 3MMM s 2 3FFM2 1/8 1.687.843.843.187 43FFM4 1/4 1.875.937 1.000.281 63FFM6 3/8 2.000 83FFM8 1/2 2.250 12 3FFM12 3/4 2.750 1.000 1.125 D 1.125.375 1.375.468 1.

937 1.437 1.500.625 Male 23MMM2 1/8 1.437.718.187 43MMM4 1/4 1.875.937.281 63MMM6 3/8 2.000 1.000.375 83MMM8 1/2 2.750 1.375.468 123MMM12 3/4 2.750 1.375.625 3MMM ll Male Tee 4FPR ross.

10 3FFM, 3FMF, 3MMM s 2 3FFM2 1/ FFM4 1/ FFM6 3/ FFM8 1/ FFM12 3/ D FFM Tee Male 3FMF Tee Male s D 23FMF2 1/ FMF4 1/ FMF6 3/ FMF8 1/ FMF12 3/ Male 23MMM2 1/ MMM4 1/ MMM6 3/ MMM8 1/ MMM12 3/ MMM ll Male Tee 4FPR ross. 24FPR 1/ FPR 1/ FPR 3/ FPR 1/ FPR 3/ FPR

11 Instrumentation Fittings PIPE THRED SPEIFITIONS Tylok Fittings are manufactured from materials meeting applicable STM or SME specifications, with pipe threads which meet or exceed NSI requirements. Strict quality control procedures are followed throughout production to provide the finest possible product. Materials: rass 316 Stainless Steel Steel These charts are to be used as a guide only and are based on normal wall thicknesses, used for the various sizes. These ratings may vary widely from effects such as the proper use of sealants, size of stock, temperature, corrosion factors, etc. Therefore, Tylok International, Inc. assumes no responsibility for its accuracy in any individual design. Pressure ratings for Tylok tube fittings that have differing end connection styles shall use the lowest of the pressure rating. TUE PRESSURE DERTING FTORS ELEVTED TEMPERTURES The table lists derating factors that must be considered in applications above that of ambient temperatures. Example: Type 316 Stainless Steel 1/4 O.D.x.0.49 wall at 800 F is 7,500 PSI x.79 = 5,925 psig. Therefore, the suggested allowable working pressure for 316 Stainless Steel (1/4 O.D. with.049 tube wall) at 800 F is 5,925 psig. Suggested Maximum Operating Pressures for Threads (psig) NPT 316 SS & arbon Steel rass Male Male 1/ / / / / / Tylok Instrumentation Fittings are rated at the following temperatures: 316 Stainless rass Steel 325 F to 1000 F (198 to 648 ) 40 F to 400 F (40 to 204 ) 65 F to 375 F (54 to 190 ) arbon Steel 316 SS * opper

12 Temperature Ratings Tylok Instrumentation Fittings are rated at the following temperatures: 316 Stainless: 325 F to 1000 F rass: 40 F to 375 F Steel: 20 F to 400 F (198 to 538 ) (40 to 204 ) (28 to 204 ) Note: onsideration should be given to maximum temperature ratings and/or tubing are coated or plated Heat Traceability Tylok Instrumentation Fittings are completely heat code traceable back to the original mill heat from which it was made. Starting with the original billet, the mill creates a certificate which completely describes the chemical & physical makeup. The material certifications can be provided when calling Tylok and giving the heat code stamp marked on the part itself, along with the part number. Raw Material Specifications Material rass Stainless Steel STM16 lloy 360 STM453 lloy 345 STM276 SMES479 Type 316SS STM124 lloy 377 SMES182 Type 316SS Steel STM108 12

NEEDLE VALVES AND PLUG VALVES

NEEDLE VALVES AND PLUG VALVES Product Line THE CREATION OF AN INDUSTRY In the mid 1940 s, Cullen Crawford founded the Crawford Fitting Company. Mr. Crawford developed and patented the original flareless fitting (nut and two ferrule