Ball Valve Manual Balance Hose Kits - Submittal
|
|
|
- Rosalyn Barton
- 5 years ago
- Views:
Transcription
1 Ball Valve Manual Balance Hose Kits - Submittal Hose Kit Size *MFR 1/2" 5 3/4" 11 1" /4" 30 **1-1/2" 44 **2" 78 Qty. *MFR (Max. Flow Recommendations) calculated at 8 fps. **1-1/2 and 2 hose kits use Chamberlin All Metal stainless steel braided hose. Trunk Connection Type (provided) FNPT (Std.) MNPT FSWT Hose Length Custom Length Supply Line Options Ball Valve w/ PT UBY Strainer w/ PT and BDV Hose Kit 1 Return COIL ATC Selection: 2-Way 3-Way Note: ATC s sized per kit as standard. 24v, Zone Valves: 1/2"-1" NO NC NSR On-Off 3 pt. Flt. 0-10Vdc Comments: Company: Rep: Approved By: Hose Kit 6 24v, Ball Valves: 1-1/4"-2" NO NC NSR Optional Union Accessories On-Off FNPTxMNPT Union w/ PT / MAV 3 pt. Flt. FNPTxFNPT Union w/ PT / MAV 0(2)-10Vdc FNPTxFSWT Union w/ PT / MAV WARNING: To insure proper installation, this hose assembly must be installed according to instructions included with shipment. Instructions are also available online at. Project: Quote #: PO #: Date: NOTE: Supply * Drawings not to scale - Representation Only. * Fit within installation areas not guaranteed. * Hose kits assembled hand tight. Unit Connection Options Reducers FSWT Hose Adapter (1/2"- 1-1/4" hoses)
2 Ball Valve Manual Balance Hose Kits Ball Valve Manual Balance Valve Balance Type: Body Design: Stem Stem Packing: Seat: Handle: Working Pressure: Manual Full Port Ball Valve w/pt & Memory Stop Chrome Plated BUNA-N Zinc Plated Steel w/ Plastic Coating 600 psig Supply Valve Options: Balance Type: Body Design: Stem Stem Packing: Seat: Handle: Working Pressure: Ball Valve Manual Balance Valve Manual Full Port Ball Valve w/pt Chrome Plated BUNA-N Zinc Plated Steel w/ Plastic Coating 600 psig Model UBY Combination Ball Valve & Strainer w/ PT and BDV C37000 Full Port Chrome Plated Ball Seal: Teflon Stem: Explosion Proof EPDM Strainer: 20 Mesh Stainless Steel Maximum Working Pressure: 400 psig Maximum Operating Temp: -4 o F to 250 o F Hose Kit 1 Hose Kit 6 For detailed technical data for any Hose Kit component, refer to the ChamFlex catalog.
3 ChamFlex Hose Assemblies - Fixed End x Swivel End Overall Length (without adapter) ChamFlex Standard hose: Fixed End x Swivel End w/ JIC x MNPT Adapter Hose Sizes: 1/2 to 1-1/4 Hose Lengths: Standard: 12, 18, 24, 36 and 48 Custom: 1/2 & 3/4 - Minimum length: 6 with 1 increments. 1 & 1-1/4 - Minimum length: 9 with 1 increments. Inner Tube: EPTF - White Santoprene with UL-94 VO Fire Rating Outer Braid: 302/304 Stainless Steel Hose Fittings: Plated Steel Hose/Adapter Connection: Male JIC Metal to Metal Seal (no O-ring or gaskets) Fixed End Fitting: MNPT Swivel End Adapter Option: FNPT (plated steel), FSWT (brass) Suitable Media: Water and Glycol. Not Rated for Potable Water 1/2 Hose 3/4 Hose 1 Hose 1-1/4 Hose Working Pressure 400 PSI 400 PSI 500 PSI 400 PSI Burst Pressure 1600 PSI 1600 PSI 2000 PSI 1600 PSI Minimum Bend Radius Temperature Ratings -40 o F to 212 o F -40 o F to 212 o F -40 o F to 212 o F -40 o F to 212 o F
4 Chamberlin All Metal Stainless Steel Braided Hose Assemblies Overall Length Chamberlin All Metal Stainless Steel Braided Hose Assembly with Union End Hose Sizes: 1-1/2 to 2 Hose Lengths: Standard: 12, 18, 24, 36 Custom: Minimum length: 12 with 1 increments. Inner Tube: 321L/316L Stainless Steel Outer Braid: 304L Stainless Steel Fittings: Iron/Carbon Steel Fixed End Fittings: MNPT Union End Fittings: MNPT Working Pressure: 300 psi Burst Pressure: 1200 psi Minimum Bend Radius: 1-1/ Temperature Rating: -20 o F to 800 o F Hose Sizes: 2-1/2 Hose Lengths: Standard: 18, 24, 36 Custom: Minimum length: 18 with 1 increments. Inner Tube: T321L Stainless Steel Outer Braid: Series 300 Stainless Steel Fittings: Iron/Carbon Steel Fixed End Fittings: MNPT Union End Fittings: MNPT Working Pressure: 300 psi Burst Pressure: 1200 psi Minimum Bend Radius: 16 Temperature Rating: -20 o F to 800 o F
5 Siemens 599 Series ATC Zone Valves 2-Way and 3-Way Zone Valves AB A A AB Standard Features Line Sizes: 1/2-1 Body Style: Globe UL Listed for Plenum installations. All metal plug and seat. Direct coupled bonnet install actuator without tools. Standard 2.5 mm strike. Change from normally open to normally closed by simply changing actuators. Visual position indicator. Manual Override: 2 Position with auto lock, 3 Pt. Flt. & 0-10Vdc using hex wrench. B Valve Body Flow Characteristic: Linear Trim: Stem: SS ASTM A582 type 303 EPDM Packing: EPDM O-rings Medium: Water, Glycol Solns. to 50% Medium Temp Range: 34 o F to 230 o F (1 o C to 110 o C) Max. Inlet Pressure: Leakage Rate: Close Off Ratings: 125 psig ANSI Class III ANSI/FCI 70-2, 2-way & 3-way valves 1/2-3/4 (44 psi), 1 (22 psi) 2 Position Actuators Voltage: 24 Vac +/- 20% 24 Vac - 50/60 Hz 9.8 VA 10 seconds Nominal Stroke: 1/10-in. (2.5 mm) Nominal Force 24 lb. (105 N) Operating Temp: 41 o F to 122 o F (5 o F to 50 o C) Noise: <35 db Available CV s 2-Way: 1/2-1.0, 2.5, 4.0 3/ Way: 1/2-1.0, 2.5, 4.0 3/ Pt. Floating/ 0-10Vdc ACTUATORS (Non-Fail Safe) Voltage: 24 Vac +/- 20% 24 Vac - 50/60 Hz 3 Pt. Flt VA 0-10Vdc VA 3 Pt. Flt sec., 0-10Vdc - 34 sec. Nominal Stroke: 1/10-in. (2.5 mm) Nominal Force: 24 lb. (105 N) Operating Temp: 41 o F to 122 o F (5 o F to 50 o C)
6 Siemens 599 Series ATCBall Valves 2-Way and 3-Way Ball Valves Standard Features Line Sizes: 1-1/4-2 Body Style: Ball 1/4 turn rotary control valves designed to be coupled with an OpenAir actuator. Universal mounting plate accommodates different actuator sizes. Variety of ball sizes and flow coefficients. Actuator and plate can be rotated to facilitate installation and wiring. Standoffs and mounting plate provide thermal barrier between the actuator and valve. Plastic mounting plate, extension and handle do not condensate. Operating handle can be manually operate valve in event of power failure. Valve Body Flow Characteristic: Equal % Ball Seals: Flow Optimizer: Stem: Stem Seals: Angle of Rotation: Chrome Plated Glass-filled with EPDM O-rings Glass-filled, Double O-ring, Blow-out proof, Double O-ring, Blow-out proof 0 to 90 degrees Medium: Water, Glycol Solns. to 50% Medium Temp Range: 35 o F to 250 o F (2 o C to 121 o C) Static Pressure/Temp: 360 psig/250 o F (600 WOG) Close Off Ratings: 200 psi for all 2-way, 200 psi for all 3-way Fail Safe Actuators Voltage: 24 Vac +/- 20% 24 Vdc +/- 15% 50/60 Hz 5 VA running, 4 VA holding 90 seconds Spring Return: 15 sec. (typical) Running Torque: 62 lb. Enclosure: NEMA 1 3 Pt. Floating/ 0-10Vdc ACTUATORS (Non-Fail Safe) Voltage: 24 Vac +/- 20%, 15% 50/60 Hz 3.3 VA 1-1/4 2-way & 3-way: 90 sec. 1-1/2-2 2-way & 3-way: 125 sec. Running Torque: 1-1/4 2-way & 3-way: 44 lb. 1-1/2-2 2-way & 3-way: 88 lb. Enclosure: NEMA 1
Trunk Connection Type (provided) FNPT (Std.) MNPT FSWT
Siemens PICV 2-Way Automatic Balance Hose Kits - Submittal Hose Kit Size Normally Closed Flow Range 1/2 L.3-2.7 1/2 L.2 -.9 1/2 H 1.0-7.5 1/2 H.5-2.5 3/4 L.5-4.5 3/4 L 1.0-5.8 3/4 H 1.0-8.9 1 1.0-8.9 1-1/4
Daikin Fire Rated Hoses & Hose Kits for Water Source Heat Pumps. Catalog People and ideas you can trust.
Daikin Fire Rated Hoses & Hose Kits for Water Source Heat Pumps Catalog 1196-8 People and ideas you can trust. Contents General Information... 4 Daikin Water Source Heat Pump Hoses & Hose Kits 4 Summary
For draining expansion tanks, other liquid storage vessels.
Plumbing Specialties 26-100 & 26-300 SERIES COMPRESSION GAUGE COCKS For draining expansion tanks, other liquid storage vessels. 26-100: rated up to 125 psig 26-300: soft metal seat/stuffing box rated up
SUBMITTAL PACKAGE FLEXIBLE SPRINKLER DROP
SUBMITTAL PACKAGE FLEXIBLE SPRINKLER DROP BRAIDED CONNECTIONS...pg 2-6 UNBRAIDED CONNECTIONS...pg 7-9 INSTALLATION...pg 10 ACCESSORIES...pg 11 6/26/2018 BRAIDED CONNECTIONS ARGCO Flexible Sprinkler Drops
SIZE RANGE: 1 TO 10. PRESSURE RANGE: FULL VACUUM TO 275 psi
2 3 4 5 HANDLE OPTION ITEM DESCRIPTION STANDARD MATERIAL 1 Wrench - Locking Durcor -62 2 Hex Head Cap Screw 316 Stainless Steel 3 Washer 18-8 Stainless Steel 4 Wrench Stop Plate - Locking 304 Stainless
2-3-5 Valve Manifolds
2-3-5 Valve Manifolds range of Valve Manifolds offer a safe and economical method of installation to control and measure pressure of liquids and gaseous media. They are ruggedly manufactured and precision
Metal & Teflon Lined Hose
May 2001 Metal & Teflon Lined Hose Components & Controls, Inc. 493 Washington Avenue Carlstadt, NJ 07072 201-438-9190 212-564-5541 Fax: 201-438-3356 www.componentsandcontrols.com Components & Controls,
BROEN UNIFLEX FITTINGS FOR WATER BROEN UNIFLEX TM FITTINGS FOR WATER
BROEN UNIFLEX FITTINGS FOR WATER TABLE OF CONTENTS Content Page Table of Contents 2 BROEN UniFlex TM BASIC 4 Product Overview 5 Water Fittings Bench Mounted Fitting with Swivel Spout... 6 Single Handle
get connected with Bradford fittings & valves Bradford Company, Inc
get connected with Bradford fittings & valves Bradford Company, Inc. 800.789.1718 www.bradfordfittings.com Bradford your top quality, sanitary stainless steel fittings & valves manufacturer serving you
PN 3000 Series Fail Closed Pneumatic Actuators
PN 3000 Series Fail Closed Pneumatic Description A of compact linear actuators having 5 diaphragm sizes for matching the requirements of 1/2" to 4" Spira-Trol valves at various differential pressures.
MX Series MX40-7XXX Series MX40-6XXX Series. Selection Guide. Applications. DuraDrive Series Actuator (Includes Accessories)
MX40-6043 Series MX40-7XXX Series MX40-6XXX Series Selection Guide Applications DuraDrive Direct Coupled Actuators are designed to accept two-position, floating, or proportional control from a DDC system
butterfly 2 to 12 Siemens 2-way Pneumatic SR
2 to 12 Siemens 2-way Pneumatic SR Normally Closed (Fail Closed) Normally Open (Fail Open) 150 psi Close-off 100 psi Close-off - 4-6 150 psi Close-off 100 psi Close-off - 4-6 Cv 50 psi Close-off - 8-12
Model SBS-10. Stainless Steel Simplex Basket Strainer. 21 Columbus Avenue Garfield, NJ 07026
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model SBS-10 Stainless Steel Simplex Basket Strainer 1/6 Stainless
Dual Modular Safety Shutoff Valves with Proof of Closure Option. DMV eco Series DMV-D eco Series DMV-DLE eco Series
Dual Modular Safety Shutoff Valves with Proof of Closure Option DMV eco Series DMV-D eco Series DMV-DLE eco Series Two normally closed safety shutoff valves in one housing; each with the following approvals.
FILTERED FAN PACKAGES
FILTERED FAN PACKAGES PLASTIC & METAL FILTERED FANS EFFICIENT, QUITE BALL BEARING MOTORS NEMA TYPE 1 AND 3R ALL KITS INCLUDE GASKETS, HARDWARE, AND TEMPLATE UL LISTED Plastic FILTER FAN PACKAGES Injection
Old-Style Aging Cell 316 Stainless Steel mL Capacity. Part No Instruction Manual. Updated 8/21/2014 Ver. 1.7
Old-Style Aging Cell 316 Stainless Steel - 500-mL Capacity Part No. 175-70 Instruction Manual Updated 8/21/2014 Ver. 1.7 OFI Testing Equipment, Inc. 11302 Steeplecrest Dr. Houston, Texas 77065 U.S.A. Tele:
Arsen FAN COIL HOSES WITH BRAIDING AND WITHOUT BRAIDING EN ISO PRODUCED AND TESTED ISO 9001:2008 OHSAS 18001
QUALITY MANAGEMENT SYSTEM CERTIFIED HEALTH & SAFETY MANAGEMENT SYSTEM Arsen FAN COIL HOSES WITH BRAIDING AND WITHOUT BRAIDING ISO 9001:2008 REGISTERED COMPANY EN ISO 10380 PRODUCED AND TESTED OHSAS 18001
Counter Display Items
1/4" Dr. x 3/8" Dr. Dual Drive Stubby Ratchet Part No. 640923 Dual drive 2 in 1 design Compact size is great for fasteners in tight areas Black composite coating with TPR injection handle for comfort 272504
Section B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1
Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe
Available materials: Stainless steel AISI 304 (Application in wet areas). Stainless steel AISI 316 (Application in aggressive areas).
Manual hose reel type STKi2 The manual hose reel type STKi2 with closed hub is suitable for all industrial and vehicle applications. While extending the drum hub and the cross braces the length of the
Blue Series Hot Melt Hose with RediFlext II Hanger System
Instruction Sheet P/N 1124594_01 Blue Series Hot Melt Hose with RediFlext II Hanger System Safety WARNING! Allow only personnel with appropriate training and experience to operate or service the equipment.
4567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123
DUPLEX STRAINERS BULLETIN NO KECKLEY COMPANY 3400 Cleveland Street P.O. Box 67 Skokie, Illinois 60076
Distributed By: M&M Control Service, Inc. www.mmcontrol.com/keckley.php 800-876-006 847-6-066 BULLETIN NO. 9400- DUPLEX STRAINERS Shown with Optional Differential Pressure Indicator KECKLEY COMPANY 400
Fugitive Emission Test Report
Fugitive Emission Test Report API 624 1 st Edition Standard Performed for Clark Reliance Corp. 2015 Jerguson 70 Series ½ Class 800 Carbon Steel Gage Valve Met Qualifications Set Forth In API 624 1 st Edition
Safety Interlock Switches
r Safety Interlock Switches TL19 TL19 Safety Interlock Switch with uard Door Locking High locking force of 10 N (270 lb.) locks guard door shut until machine is safe to enter IP67 (NEMA 6) enclosure enables
Suggested Retail Price List
Part Description List Price Pumptec 112 Series 80020 112V-100/M72, 230V, BUNA, M-VALVE, 4-1/4" PORTS, BLACK $418.00 80025 112T-040/M70, 120V, BUNA, M-VALVE, 4-1/4" PORTS, BLACK $351.00 80030 112T-075/M70,
INSTALLATION & MAINTENANCE MANUAL SERIES 9000 MODELS 9150/9300 SERIES 9000 VALVES WITH V BALL
BRIEF INTRODUCTION Split body (2-piece) valve allows easy replacement of gasket, seal, and seats without special tools. Series 90D ball valves use floating ball design. Induced by the line pressure the
DUPLEX STRAINERS 800-KECKLEY ( ) BULLETIN NO / FAX: 847/ WEB SITE:
BULLETIN NO. 9400- DUPLEX STRAINERS 800-KECKLEY (800-2-9) 847/674-8422 FAX: 847/674-206 E-MAIL: SALES@KECKLEY.COM WEB SITE: WWW.KECKLEY.COM NO QUESTION. WE HAVE THE ANSWERS. Shown with Optional Differential
AOP B Series Floating Ball Valves. Delivering dependability at an affordable price into upstream, general purpose valve applications
AOP B Series Floating Ball Valves Delivering dependability at an affordable price into upstream, general purpose valve applications AOP Series BUL Floating Ball Valves FEATURES AND BENEFITS One-piece carbon
PARTS LIST EXTRACTOR ACCESSORIES
PARTS LIST EXTRACTOR ACCESSORIES 3 - JET WAND - 4097101 101 4097961 HANDLE ASSEMBLY - INCLUDES: 1 102 9121210 1/4-20 X 5/8 HEX BOLT 2 103 ---------- HANDLE CLAMP 1 104 9120920 1/4-20 HEX NUT 2 105 9120777
Eaton Winner Hose and Fittings. North America
Eaton Winner Hose and Fittings North America Table of contents Contents Safety and Ordering Information 3 Warranty Information 3 Hose EC115 EN857 1SC Braided Hose 5 EC215 EN857 2SC Braided Hose 5 EC118
Synflex. Mini Catalog
Synflex Mini Catalog Table of Contents Hose Selection Chart Core 5 Hoses (Application/Product) 2 3R30, 3130, 3580, 30CT, 3R80 Core 5 Hoses (Product) 2 3R30, 3130, 3580, 30CT, 3R80 Hose 3R30 Low Pressure
For full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
R Safety Interlock Switches TL4024 Safety Interlock Switch with uard Door Locking High locking force of 1,500 N (7 lb.) locks guard door shut until machine is safe to enter IP67 (NEMA 6) enclosure withstands
EX30 500H. Parts List Models: Form No /2015 REV A
EX0 500H Parts List Models: 5678 Form No. 56065 /05 REV A DESCRIPTION TABLE OF CONTENTS PAGE Decal System...- Pallet System EX0-...-5 Pallet System EX0-...6-7 Recovery System... 8 Solution System... 9
NEEDLE VALVES AND PLUG VALVES
Product Line THE CREATION OF AN INDUSTRY In the mid 1940 s, Cullen Crawford founded the Crawford Fitting Company. Mr. Crawford developed and patented the original flareless fitting (nut and two ferrule
For full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
R Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 6-5480 www.cmafh.com Safety Interlock Switches TL19 Safety Interlock Switch with uard Door Locking High
NIBCO PNEUMATIC ACTUATORS
ACT-0718 ACTUATORS AND CONTROLS FOR METAL & CHEMTROL VALVES Effective July 2, 2018 Supercedes ACT-0117 dated January 2, 2017 Suggested List Prices Subject to Change Without Notice. NIBCO PNEUMATIC ACTUATORS
Section B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1
Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe
Maintenance & Repair Instructions
brands you trust. Maintenance & Repair Instructions CRANE ChemPharma, Tufline Flanged 6 & 8 Process Ball Valves Figure 1. 2-Piece Ball Valves Tufline 521F, 523F Size: 6" - 8" Tufline 521R, 523R Size:
PRODUCT TRAINING MANUAL
PRODUCT TRAINING MANUAL for BRASS PRODUCTS designed for $5.95 TABLE OF CONTENTS Fitting Identification Page Course Outline...........................1 Glossary..............................2-5 Safety Information........................6
NEW PRODUCT. Turn to the Harris. Pros
NEW PRODUCT Turn to the Harris IRONWORKER KITS Pros harris makes a wide variety of industrial grade IRONWORKER KITS metalworking outfits. professionals know that when they want to get the job done fast
MR98 Series Backpressure Regulators, Relief and Differential Relief valves
MR98 Series Instruction Manual January 2015 MR98 Series Backpressure Regulators, Relief and Differential Relief valves P1757 TyPe MR98L P1753 TyPe MR98H D103588X012 Figure 1. Typical MR98 Series Backpressure
Emergency Stop Devices
New! Selection and Application of.. 278 Emergency Stop Rope Pull Switches........... 279 New! Emergency Stop Push Buttons............... 293 Banner Engineering Corp. Minneapolis, MN U.S.A. bannerengineering.com
Quality Consistency Reliability.
WAND CATALOG Quality Consistency Reliability. Each and every tool that EDIC sells is rigorously tested with high pressure solution at EDIC s factory in Los Angeles before it is approved for shipment. EDIC
industrial ball valves
Industrial Ball Valves Index 2-Piece Ball Valve 7510 1 3-Piece Ball Valve 7520 2 3-Piece Ball Valve with Gyrolok Tube End Fittings 7520 3 High Tolerance Thread Specification 4 Family Features Low Pressure
brands you trust. Lead Free Ball Valves Crane ChemPharma & Energy
brands you trust. Lead Free Ball Valves Lead Free Ball Valve Features & Benefits NSF 6 Certified brass Material, fully compliant with national legislation. Quick delivery, in stock and offered for shipment
The unique fitting design provides a swivel at both ends of the hose assembly.
The Tramec Sloan Live Swivel system of heavy duty air brake hose assemblies meet and exceed all requirements of FMVSS 106 and SAE J1402. Each end fitting is labeled with certification to the federal standards.
Advantage Plus TIM-3600 Series Reel
Read the following precautions and instructions before you begin assembly or using. Failure to comply with these instructions could result in personal injury or property damage. Keep these instructions
Hose Reel Series L701/G701
Hose Reel Series L70/G70.0 WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal
Pressure relief valve VRH 5 / VRH 30 / VRH 60 / VRH 120
Data sheet Pressure relief valve VRH 5 / VRH / VRH 60 / VRH hpp.danfoss.com Table of Contents Contents 1. Introduction...2 2. Features...2 3. Variants...2 4. Technical data...3 5. Flow...3 5.1 VRH 5 Max.
Pressure relief valve VRH 5 / VRH 30 / VRH 60 / VRH 120
Data sheet Pressure relief valve VRH 5 / VRH / VRH 60 / VRH 120 hpp.danfoss.com Table of Contents Contents 1. Introduction...2 2. Features...2 3. Variants...2 4. Technical data...3 5. Flow...4 5.1 VRH
Parts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns:
7-1 Section 7 Using the Illustrated List The parts lists provided in this section are organized into the following columns: Item Identifies illustrated parts that are available from Nordson Corporation.
ET600 PARTS LIST MODELS (100), (100H), (400H)
ET600 PARTS LIST MODELS 5605 (00), 5605 (00H), 5605 (00H) 7/0 revised 8/06 FORM NO. 560585 REV F PARTS LIST TABLE OF CONTENTS DESCRIPTION PAGE Base System - 00H... - Base System - 00H... -5 Base System
MANIFOLDS AND NEEDLE VALVES
Product Line THE CREATION OF AN INDUSTRY In the mid 1940 s, Cullen Crawford founded the Crawford Fitting Company. Mr. Crawford developed and patented the original flareless fitting (nut and two ferrule
ASSEMBLY GUIDE. Customer Service: INCH² 2-BURNER & 864 INCH² 2-BURNER
ASSEMBLY GUIDE 688 INCH² 2-BURNER & 864 INCH² 2-BURNER DANGER If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flames. 3. Open lid. 4. If odor continues, keep away from the appliance
Parts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns:
7-1 Section 7 Using the Illustrated List The parts lists provided in this section are organized into the following columns: Item Identifies illustrated parts that are available from Nordson Corporation.
TCWS54 SEE THRU DIAMOND BURNER INSTALLATION KIT INSTRUCTIONS
INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this manual for future reference. These instructions are supplementary to the Installation and Operating Instructions supplied with the
XENON HELIDECK FLOODLIGHT INDUSTRY USER MANUAL
TEF 9964 XENON HELIDECK FLOODLIGHT INDUSTRY USER MANUAL IMPORTANT Read this instruction carefully before installing the product 996A106032 TUM 1024 REV. E 06.02.14 Tranberg AS P.O. Box 8033 N-4068 Stavanger
10260 Series Actuators Model Selection Guide
Issue 6 Page 1 of 5 2 Series Actuators Model Selection Guide Instructions Select the desired key number. The arrow to the right marks the selection available. Make one selection each from Table I thru
TCWS.38NG03.C BLACK DIAMOND BURNER KIT INSTRUCTIONS
IMPORTANT: THESE INSTRUCTIONS ARE TO REMAIN WITH THE HOMEOWNER These instructions are supplementary to the Installation and Operating Instructions supplied with the fireplace and should be kept together.
300 Model 870 Four Wheel Hose Cart Owner s Manual
300 Model 870 Four Wheel Hose Cart Owner s Manual IMPORTANT: READ THE OWNER S MANUAL BEFORE ASSEMBLING TOOLS REQUIRED: TWO ADJUSTABLE WRENCHES; HAND PUMP Estimated assembly time: 30 minutes PARTS LIST
LOUISIANA BURNER / The Millers and the staff of Louisiana Burner
Louisiana Burner 634 Main Street Pineville, LA 71360 318 318--473 473--2868 Fax 318 318--473 473--2807 www.louisianaburners.com catalog2016 LOUISIANA BURNER Dear Customers, Last year, the Miller Family
BROEN-LAB UNIFLEX FITTINGS FOR WATER BROEN-LAB UNIFLEX TM FITTINGS FOR WATER
BROEN-LAB UNIFLEX FITTINGS FOR WATER TABLE OF CONTENTS Content Page Table of Contents 2 BROEN-LAB UniFlex TM BASIC 4 Product Overview 5 Water Fittings Bench Mounted Fitting with Swivel Spout... 6 Single
OFFICIAL LICENSED PRODUCT CATALOG
OFFICIAL LICENSED PRODUCT CATALOG SNAP-ON IS A TRADEMARK OF SNAP-ON INCORPORATED AND IS USED UNDER LICENSE. SNAP-ON MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE MERCHANDISE IN THIS CATALOG.
RTA flexible conduits
[ PROTETION OF LES ] Products and systems RT flexible conduits For each application and environmental stress there is a corresponding polyamide, PV or metal-plastic flexible conduit solution, ideal for
INSTALLATION INSTRUCTIONS TOWNSEND
INSTALLATION INSTRUCTIONS TOWNSEND.00 DECK MOUNT BATH FILLER.0 Thank you for selecting American Standard... the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly-please
EPM Series Reversing Electric Actuators
EPM Series Reversing Electric Actuators Innovative Quarter-Turn Actuators that Look the Same on the Outside with the Hayward Difference on the INSIDE! Overview On/Off and Proportional Control Models Designed
PARTS LIST COLT COLT HEPA
PARTS LIST COLT 800-1250 - 1450 COLT HEPA - 1250-1450 MOTOR / LID ITEM PART NO. PART DESCRIPTION QTY. 101 0891201 TOP COVER 1 102 0294341 TOP MOTOR SEAL 1 103 0299861 STRAIN RELIEF CORD CLAMP 1 104 0891131
Urea/Adblue Hose Reel
www.scintex.com.au sales@scintex.com.au Model: SHR3408 Urea/Adblue Hose Reel Product Manual Specifications Spring driven drum: for automatic rewind. Locking ratchet: to maintain the desired length of hose
Pilot kick type 2 port solenoid valve (general purpose valve) Air, low vacuum (1.33 x 10 3 Pa (abs)), water, kerosene, oil (50 mm 2 /s or less)
(general purpose valve) ADK11/ADK12 Series NC (normally closed) type, NO (normally open) type Port size: Rc1/4 to Rc1 Diaphragm structure Excluding ADK12 JIS symbol ADK11: NC (normally closed) type OUT
Graphite Ribbon/Filament Packing for Fisher Sliding Stem Valves
Instruction Manual Graphite Packing for Sliding-Stem Graphite Ribbon/Filament Packing for Fisher Sliding Stem Valves Contents Introduction... 1 Scope of Manual... 1 Description... 1 Storage and Startup...
Gates Hose Cutter Model 6-32 For six-wire spiral and two-wire braid hose through 2" I.D. Product Number: Clean Easy Cuts Safe Operation
Standard Hydraulic Hose Specialized Mining Couplings, Adapters and Accessories Specialized Mining Hose Product Information Gates Power Cutter 208 Product : 7480-6609 Effortless Straight Cuts Every Time
FOAM PROPORTIONING EQUIPMENT
10 VERTICAL & HORIZONTAL BLADDER TANKS DESCRIPTION All valves are labeled showing normal working position. Buckeye Bladder Tanks store foam concentrate and are one component of a Balanced Pressure Foam
Hoses and Accessories PTFE Hoses. Contents. Introduction
Contents Introduction... 1 Guidelines for fitting hose... 2 RX Eriflon-F 621 MD... 4 RX Eriflon-F 621 HD... 5 RX Eriflon-F 622 HD... 6 RX Eriflon-C4 Chlorine... 7 RX Eriflon-F 614... 8 RX Eriflon -F 511...
Big SHOT III Hybridization Oven
Big SHOT III Hybridization Oven Models 230402 and 230402-2 Whether you are working with Northern Blots, Southern Blots, Microarrays or another application that requires incubation, you will find the Big
Instructions for Converting Range to Operate on Liquefied Petroleum Gas
INSTALLATION AND SERVICES MUST BE PERFORMED BY A QUALIFIED INSTALLER IMPORTANT: SAVE INSTRUCTION MANUAL FOR THE LOCAL INSPECTOR S USE. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE This conversion
Parts Catalog. S-Series Slicer Manual S13. Model:
, 08 99506 ECN 035 Parts Catalog S-Series Slicer Manual Model: S3 S3 /3/08 Rev. M IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE FOOD
CRD120SC TUBING CUTTER
CRD120SC TUBING CUTTER OPERATIONS MANUAL 1 VERSION 2.1 LAST EDITED 05.01.2018 cleanroomdevices.com Table of Contents Table of Contents....2 1.0 General Product & Safety Information... 3 1.1 Product Information
Flange. Connection Trunnion Ball Valves.
Flange Connection Trunnion Ball Valves www.smstork.com TRUNNION BALL VALVES Where to use On/Off Shore Oil and Gas Production Subsea Oil and Gas Production Oil and Gas Storage Oil and Gas Transportation
Hose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
FBO-10 and FBO-14. Fuel Filter/Water Separator For High-Flow Applications. Product Features. Contact Information
FBO-0 and FBO-4 Fuel Filter/Water Separator For High-Flow Applications These versatile housings have three filter options to meet various requirements: a fuel filter/water separator, a silicone treated
Automatic hose reel type ST Our topseller the hose reel type ST is a very robust and reliable version with automatic spring rewind.
Automatic hose reel type ST Our topseller the hose reel type ST is a very robust and reliable version with automatic spring rewind. Available materials: Steel, powder coated, RAL7032, RAL3000 (Application
Couplings for Gates Hoses 7 Combination Nipple
Supersedes 1 Long Shank Couplings for Gates Hoses 7 Combination Nipple Description: Cast brass, serrated shank, set has hex male and hex swivel female couplings, with a washer seal. Threads are GHT or
Color Light Streams Lighted Bubbler Spillway Pot (CLSDLP) Installation Manual
Color Light Streams Lighted Bubbler Spillway Pot (CLSDLP) Installation Manual 27.75 23.75 25.50 20.75 Specifications: 8-13 GPM 12-14 VAC only (Class 2 transformer required) 3W max. 100 ft. cord, conduit
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS C24DA/GA-SERIES STEAMERS C24GA6 C24GA10 C24DA6 C24DA10 ML-138085 ML-138088 ML-152022 ML-152023 VULCAN-HART DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC 3600 NORTH POINT BLVD.,
Integrated Process Solutions
Integrated Process Solutions w w w. m k s i n s t. c o m Series 31 ISO-KF fittings Sizes to 0 ( to 4'') Series 31 is a line of ISO-KF standard vacuum components. The ISO-KF system refers to the family
MR95 Series Pressure Regulators
Instruction Manual MR95 Series October 2014 MR95 Series Pressure Regulators P1757 TYPE MR95L P1753 TYPE MR95H PRESSURE REDUCING REGULATORS Figure 1. Typical MR95 Series Pressure Regulators D103587X012
Tank. Part B, Section 1. This section covers the following unit configurations. Pump Piston Pump (E or G)
Part B, ection Model Voltage This section covers the following unit configurations. 3400V All Pump Piston Pump (E or G) Manifold Control 4-Port (A) Vista tandard (V) Vista Pattern (PC) Vista Temperature
FIBER OPTIC CLOSURES
FIBER OPTIC CLOSURES In-line type and dome type - series CLS-I, CLS- IF2X, CLS-D, CLS-DF2X144 and CLS-DF2X240 PACIFIC INTERCONNECTIONS - connecting the world with fiber optics IN-LINE TYPE FIBER OPTIC
Bourdon Tube Pressure Switches
Bourdon Tube es Ranges to 8000 psi (55. bar) FEATURES Visible calibrated dial On/off indication (except hermetically sealed snap switch models) Adjustable or fixed deadband SPT snap-action, hermetically
Electrical Specifications. Dimensions (inches)
Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power
Electrical Specifications. Dimensions (inches)
Page 7203 Electrical Specifications Valve Position Control 0.1 angular degree resolution Flow Control ± 1% of flow reading over a turndown of 20: 1 ir/fuel Ratio Control ± 2% with turndown of 20: 1 Power
NORTHFIELD CORPORATION 1870 COMMERCE DR. DE PERE, WI UNITED STATES
1 MANUFACTURER: MODEL: NORTHFIELD CORPORATION 1870 COMMERCE DR. DE PERE, WI 54115 UNITED STATES NORTHFIELD CLS SPECIFICATIONS: VOLTAGE: FREQUENCY: CURRENT: AIR: 115VAC-230VAC 50/60Hz 5 AMP 80 PSI (for
Molded High-Voltage Bushing Wells
66-10 Molded High-voltage Bushing Wells Howard Industries Components Division Molded High-Voltage Bushing Wells Catalog Section 66-10 INTRODUCTION Howard Industries molded high-voltage bushing wells are
MODELS: 440 SM & 440 SMSS
Most Dependable Fountains, Inc. OPERATIONS MANUAL MODELS: 440 SM & 440 SMSS Most Dependable Fountains, Inc 5705 Commander Drive Arlington, TN 38002 800-552-6331 FOUNTAINS, MOST DEPENDABLE FOUNTAINS, INC.
MR95 Series Pressure Regulators
Instruction Manual D103587X012 MR95 Series July 2017 MR95 Series Pressure Regulators TYPE MR95L TYPE MR95H PRESSURE REDUCING REGULATORS Figure 1. Typical MR95 Series Pressure Regulators Specifications
Visit us at 5170 N 125th St. Butler WI or online at 197
Never uses a clamp Lightweight and durable Smooth elastomer inner tube 250 psi operating pressure Temperature range -40 F to 300 F Sold by running foot Textile braid reinforcement available in Black and
2100 Series Series Emergency Pressure Relief Vent and Manhole Cover. North America Only. Table of Contents. Introduction. Scope of the Manual
Instruction Manual D103823X012 September 2017 Emergency Pressure Relief Vent and Manhole Cover Table of Contents Introduction...1 Specifications...2 Product Identification and Marking...3 Principle of
ENGINE DRIVEN PUMPS PRODUCTS
ENGINE DRIVEN PUMPS PRODUCTS Red Lion Pumps With over 80 years of experience, Red Lion is the leader in water transfer pumps. Count on Red Lion to help you select the best well pump for your needs. What
Unshielded Fluid Hose Kit
Instructions Unshielded Fluid Hose Kit 308688C Kit Part No. 238995 Kit for converting the PRO 5500wb Spray Gun and the PRO Auto Xs wb Spray Gun to allow the use of a bare PTFE(unshielded) fluid hose. Order