TRIM TO THE TRADE. PRODUCT CATALOGUE #109 ORDERS & INQUIRIES CAN BE ED TO: QUALITY PLUMBING SPECIALTIES

Transcription

1 PRODUCT CATALOGUE #109 QUALITY PLUMBING SPECIALTIES VISIT OUR ORDERS & INQUIRIES CAN BE ED TO: TRIM TO THE TRADE

2 TRIM TO THE TRADE TABLE OF CONTENTS Terms & Conditions...A,B Care & Cleaning...B Product Finishes...C Faucet Hole Covers...1 Air Gaps...1 Disposal Flanges & Stoppers...2 Large Basket Strainers...3 Rinse-Quick...3 Dispensers...4 Drain Trim Sets Grills & Strainers Shower Drains...9 Roman Tub Drains...10 Shower Rods Bar & Sink Strainers...11 Tank Levers Lavatory Drains...13 P - Traps...14 S - Traps...15 Slip Joint Nuts...15 Tailpieces...15 Slip Joint Elbows...16 Slip Joint Extension Tubes...16 Closet Tank Elbows...16 Double Offsets...17 Cover Casings...17 Bath Strainers Conversion Kits...20 Face Plates & Accessories...21 Offset Bath Supplies...21 Waste & Overflow Trip Lever Style...22 Lift & Turn Style...22 Chain & Stopper Style...23 Tip-Toe Style...24 Waste & Overflow Tubes...24 & Holders...25 Shower Heads...25 Shower Arms & Flanges...26 Tub Spouts...27 Remodel Plates...28 Closet Supply Sets...29 Lavatory Supply Sets...30 Supply Tubes Flat Head Rigid...31 Bullnose Rigid...31 Rigid...31 Corrugated Risers...32 Braided Risers...32 Angle Stops 1/2 IPS /2 Compression /8 IPS...34 Straight Stops 1/2 IPS /2 Compression /8 IPS...36 Stops w/ 5 Extensions Stops w/ Corrugated Risers...37 Brass Fittings...38 Nipples...39 Sure Grip Flanges...40 High Box Flanges...40 Bell Flanges Log Lighter Trim...41 Numerical Suffix

3 TERMS & CONDITIONS LIMITED WARRANTY: Trim To The Trade warrants that its products are free from defects in materials and workmanship for a period of 90 days to the user thereof. This Warrant (1) does not include, and Trim To The Trade does not assume any liability for, (a) the finish or wearing quality thereof on any of its products, (b) any obligation other than replacement of the defective product upon presentation thereof to Trim to The Trade during the warranty period, (c) any labor charges, removal and installation expenses, freight or postage to or from Trim To The Trade or any incidental or consequential damages resulting from any defective product and (2) is in lieu of all other warranties, expressed or implied. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. PRODUCT LIABILITY: Insurance statements are available upon request. PRICES: Prices are indicated in Suggested Retail Prices. Prices are subject to change without notice. Price list #109 supercedes all previous price schedules. All prices indicated in United States currency and must be paid in U. S. currency. MINIMUM INVOICE CHARGE: There is no minimum billing to ship to you our customer. However, there is a $30.00 net minimum to ship directly to your customer. Air orders exempt. FREIGHT: Shipper reserves the right to ship merchandise by method of our choosing. Shipments are F.O.B. Thousand Palms. California. Full Freight Allowed on shipments of $ NET invoice value within the continental United States. Full Freight allowed on shipments of $ NET invoice value to Hawaii, Alaska, and Canada. Freight allowance will not apply to customers outside the United States and Canada boundaries. We will not ship merchandise collect to your customer. Trim To The Trade places insurance on all shipments leaving our warehouse, covering damage or loss, for full value of shipment. Insurance charges are automatically added to freight charges on invoices to you. Freight Collect shipments require your UPS/FED EX account number. When customer requests special handling, any next day, second day, third day, etc. It is the customer s responsibility to notify Trim to the Trade of any handling discrepancies within one week. As the carriers have a time limit for this type of dispute. We are only responsible for the number of cartons the customer signs for. A

4 RETURNS: Merchandise cannot be returned without prior authorization from our returns department. All returns are subject to a minimum of 30% restocking charge. All returns must be properly packaged and accompanied by either a copy of the original invoice or packing slip. Shipping charges for returned merchandise must be prepaid. No C.O.D. s will be accepted. Credits are issued, upon inspection. We do not even exchange, or swap merchandise. We will reinvoice replacement merchandise and credit the returned merchandise. If we receive merchandise that is not from Trim to the Trade you will be notified immediately and will have 30 days to respond. After 30 days the merchandise will be scrapped. RETURN AUTHORIZATIONS: Any materials returned, other than defective items, will carry the following re-stock charges: 30% - Items returned with-in 30 days from Invoice date 30% - Items returned between 1-3 months 40% - Items returned between 4-6 months 50% - Items returned between 6-12 months NO RETURNS ON-Items over 1 year old, regardless if defective or not CLAIMS: All claims for defective merchandise, shipment shortages, and billing errors, must be made within one week after receipt of goods. PRODUCT MODIFICATION: We reserve the right to modify any product contained herein without any prior notice. TRIM TO THE TRADE: Shall not be responsible for typographical errors and will not be held responsible for any liability Associated with misprints,errors and/or pricing discrepancies in this publication. POSSESSION OF THIS CATALOG DOES NOT CONSTITUTE ANY OFFER TO SELL. As with all quality plumbing supplies, care must be taken during installation and regular long term use. There is a protective coating on all goods to protect the surface from scratching or tarnishing during shipping and storage. The protective coating is not meant to withstand normal day to day use on items which come into contact with acids (found in most foods) and corrosives (found in all detergents). Trim To The Trade does not warrant the wearing quality of the protective coating. INSTALLATION Decorative items should be the last items to be installed after final cleaning of the surrounding areas. DO NOT USE putty or silicone sealer containing a curing acidic base for installation. These items will damage the protective coating through heat generation. CARE AND CLEANING Use a soft cloth with water to clean. DO NOT USE compounds containing acids (muratic, phosphoric, hydrochloric, or hydroflouric), solvents (xylene or touene), or other cleansers (such as bleach, alchohol, aromatic oils, or those containing abrasives). All of these products will cause damage to the protective coating and may further damage or destroy the base material through etching or pitting. B

5 C

6 FAUCET HOLE COVERS 4T FAUCET HOLE COVER SOLID TOP AIR GAPS 4T-202 AIR GAP KIT Plastic Body, Brass Cap IAPMO approved 4T-203 AIR GAP CAP 4T-204 AIR GAP CAP WITH RIM Sits flush on counter 4T-205 AIR GAP KIT WITH RIM Plastic body, Brass Cap- IAPMO approved TRIM TO THE TRADE 1 FAX

7 DISPOSAL FLANGES & STOPPERS 4T-209K FLANGE & STOPPER SET Includes: Flange (4T-209) and Stopper (4T-210) 4T-209 GARBAGE DISPOSAL FLANGE 4T-210 GARBAGE DISPOSAL STOPPER 4T-207 DEEP GARBAGE DISPOSAL FLANGE Approx 2 3/8 Deep 4T-208 DEEP FLANGE(4T-207) AND (4T-210) set Fits ISE, Kenmore, Badger, and Maytag FC1 and FC3 & Emerson Fits KitchenAid KCDS250, KCDI240, KCDB240, and KCDB150 4T-214 GARBAGE DISPOSAL FLANGE AND STOPPPER 4T-211 GARBAGE DISPOSAL FLANGE 4T-212 GARBAGE DISPOSAL STOPPER Fits Waste King Gourmet Custom Series 3 Bolt Mount Models: 9910, 9920, 9930, 9950, and 9980 Whirlaway Pro 3 Bolt Models : 184, 284, 384, 584, 984 and T-213K FLANGE & STOPPER SET Includes: Flange (4T-213A) and Stopper (4T-213S) 4T-213A 4T-213S Fits models below: GARBAGE DISPOSAL FLANGE GARBAGE DISPOSAL STOPPER Waste King Gourmet Easy Mount: 111, 1001, Legend Series (New Style) 2600, 3100, 3300, and 8000 (SS= Old Style) SS 2600, SS 3100, SS 3300, and SS 8000 Caloric - WUR200, WUR210, WUR400 Eliminator - D3000, D-3001, D-5000, DF-5500, D-7501 Frigidare - FD3000D, FD3001D, FD5000D, FD5500D, FD5501D, FD7501D GE - GFC1000G, GFC197G, GFC210G, GFC232G, GFC240G, GFC241G, GFC440G, GFC610G Gibson - GD30V, GD50V, GD55V Kelvinator - KF30F, KD50F, KD55F Magic Chef - L10C-C, L30C, L50C, L50C-C Mr. Rooter - 383, 883, 983 Modern Maid - WXD750A M. Ward , 21583, 21540, PHCC - 194, 294, 394, 994, 1094 Sinkmaster - 401, 501, 701, 801, 901PC, 450, 550, 850, 950, 1050, 1500, 2100, 2500, 3000 Tappan/O Keefe , , , , Whirlaway - 891, 191, 191AP, 191PC, 291, 291AP, 291PC, 391, 391PC, 591, 591PC, 991, 991PC 1091 White-Westinghouse - WD300J, WD301J, WD500J, WD550J, WD551J, WDF750J TRIM TO THE TRADE 2 FAX

8 LARGE BASKET STRAINERS 4T-231 LARGE BASKET STRAINER WITH POST STYLE BASKET (4T-232) Complete with nuts & washers Fits 3-1/2 to 4 opening - 4-3/8 flange diameter 4T-232 POST BASKET ONLY 4T-242 LARGE BASKET STRAINER WITH WING NUT LOCKING STYLE BASKET (4T-243) Complete with nuts & washers Fits 3-1/2 to 4 opening - 4-3/8 flange diameter 4T-243 WING NUT LOCKING BASKET ONLY Not available in # 11 RINSE-QUICK 4T-219 RINSE-QUICK HEAD & HOSE Head is black plastic with metal plated ring Hose is clear braided plastic 4T-220 RINSE-QUICK HEAD ONLY Head is back plastic with metal plated ring 4T-221 RINSE-QUICK HOSE GUIDE TRIM TO THE TRADE 3 FAX

9 DISPENSERS 4T-215 ECONOMY LOTION DISPENSER SOLID BRASS 4T-215 KIT EXTENSION KIT FOR 4T-215 LOTION/SOAP DISPENSER APPROX. 2 1/4 NIPPLE FOR THICKER COUNTERTOPS 4T-215B HEAVY DUTY LOTION DISPENSER SOLID BRASS 4T-215BC KIT EXTENSION KIT FOR 4T-215B and 4T-215C LOTION/SOAP DISPENSER APPROX. 2 1/4 NIPPLE FOR THICKER COUNTERTOPS 4T-215C DECORATIVE HOOK STYLE LOTION DISPENSER- SOLID BRASS 4T-216 WATER DISPENSER 6 Faucet part only for filtered water Input for 1/4 compression. 7/16 diameter hole required for installation. NOT USABLE AS AN INSTANT HOT OR REVERSE OSMOSIS 4T WATER DISPENSER FOR FILTERED WATER Faucet part only for filtered water 2 1/2 Spud for thicker countertops. NOT USABLE AS AN INSTANT HOT OR REVERSE OSMOSIS 4T WATER DISPENSER Faucet part only for filtered water 2 1/2 Spud for thicker countertops. NOT USABLE AS AN INSTANT HOT OR REVERSE OSMOSIS 4T-216 KIT REPAIR KIT FOR 216, 217, & 218. Handle, Spring, O-Ring & Nut TRIM TO THE TRADE 4 FAX

10 GRILLS / STRAINERS / TRIM SETS 4T-029 DRAIN TRIM SET Fits Frank Pattern (Instant Set) shower drain #20SD Includes: Strainer (4T-045) and Crown (4T-046) 4T T-029 WITH TILE SQUARE (4T-040) 4T /4 OD SNAP-IN STRAINER Fits Frank Pattern (Instant Set) shower drain #20SD Prong-to-Prong diameter - 2-7/8 4T /2 OD (2-7/8 ID) CROWN Fits Frank Pattern (Instant Set) shower drain #20SD 4T /4 (3-5/8 ID) TILE SQUARE Fits Plumbing Products drains 4T /4 OD (4-3/8 ID) TILE SQUARE 4T-030 DRAIN TRIM SET Fits Plumbing Products, Pasco and American Brass & Aluminum drains Includes: Grill (4T-031), Crown (4T-032) and Screws (4T-033) 4T T-030 WITH TILE SQUARE (4T-040) 4T-042 DRAIN TRIM SET Fits Casper/Oatey #151CI and #151CP Includes: Grill (4T-031), Crown (4T-042GC) and Screws (4T-033) 4T T-042 WITH TILE SQUARE (4T-040) 4T /8 GRILL WITH SCREWS ( 4T-031 Grill,4T-033 Screws) 4T /2 OD (3 ID) CROWN Fits Plumbing Products, Pasco and American Brass & Aluminum drains 4T X 3/8 FLAT HEAD SCREW Fits Plumbing Products, Pasco, American Brass & Aluminum, and Casper/Oatey drains Packaged 2 per bag 4T-042GC 3-5/8 OD (3 ID) CROWN Fits Casper/Oatey drains #151CI and #151CP TRIM TO THE TRADE 5 FAX

11 GRILLS / STRAINERS / TRIM SETS 4T-090 DRAIN TRIM SET Fits Plastic Oddities receptor drains PBR-400, PBR-406, PGP-300, PSI-280, and PLP-350. Proflo pf Also fits C.P. Industries, Richmond Foundry Prier Brass, and Rapid Fit drains Includes: Grill (4T-092) and Screws (4T-095)+ (4T-094) 4T OD GRILL ONLY Screw Holes - 3-3/8 center to center 4T-092 4T-091 DRAIN TRIM SET WITH MACHINE SCREWS & SELF TAPPING SCREWS Fits Plastic Oddities shower drain PFG-600. Fits Sioux Chief #821 Thru #825 Includes: Grill (4T-093) and Screws (4T-095) & (4T-094) 4T /4 OD GRILL ONLY Screw Holes - 2-5/8 center to center 4T x 3/8 FLAT HEAD MACHINE SCREW Fits Plastic Oddities, Richmond Foundry and C.P. Industries Packaged 2 per bag 4T x 3/8 PHILLIPS FLAT HEAD SELF-TAPPING TYPE A SCREW Fits Plastic Oddities drains Packaged 2 per bag 4T /8 OD GRILL ONLY Fits Plumbing Products, Pasco, American Brass & Aluminum, and Casper/Oatey drains Screw Holes - 2-7/8 center-to-center 4T-034 Grill SET WITH SCREWS Fits Plumbing Products, Pasco, American Brass & Aluminum, and Casper/Oatey drains Screw Holes - 2-7/8 center-to-center (4T-031 Grill & 4T-033 Screws) 4T /4 OD SNAP-IN STRAINER Fits Casper/Oatey #109 Prong-to-Prong diameter - 2-7/8 TRIM TO THE TRADE 6 FAX

12 GRILLS / STRAINERS 4T /4 OD SNAP-IN STRAINER Fits Casper/Oatey, Intercon, B & K Ind., Prier Brass, Schier, Sioux Chief #821 Thru #825 Swan and Aqua Glass shower receptor drains Prong-to-Prong diameter - 2-7/8 4T /4 OD SNAP-IN STRAINER ONLY Fits Swanstone drains and Sioux Chief 824-2S Prong-to-Prong diameter - 2-7/8 Prong length - Approx 5/8 4T /4 OD SNAP-IN STRAINER ONLY Fits Frank Pattern (Instant Set) shower drain #20SD Prong-to-Prong diameter - 2-7/8 4T /4 OD SNAP-IN STRAINER Fits American Brass & Aluminum drains Prong-to-Prong diameter - 2-7/8 4T /2 OD SNAP-IN STRAINER Fits Fiat Cascade shower drains Prong-to-Prong diameter - 3-1/8 4T-049J 4 OD STRAINER Fits Fiat for terrazzo or molded stone shower floors (MFT) 4T /4 OD SNAP-IN STRAINER Fits Florestone shower pan drains Prong-to-Prong diameter - 3 TRIM TO THE TRADE 7 FAX

13 GRILLS / STRAINERS 4T /8 OD SNAP-IN STRAINER Fits Mustee shower pans that use the plastic Mustee drains and Sioux Chief 826-2S Note: Will not fit SD Series bases (factory installed stainless drain) Prong-to-Prong diameter /16 4T-0663J 4-5/8 OD SNAP-IN STRAINER Fits Mustee shower pans that use plastic SD Series bases (factory installed stainless drains) Prong-to-Prong diameter - 3 4T-077G 4-1/4 OD SNAP-IN STRAINER Fits C.P. Industries shower drain Prong-to-Prong diameter /16 4T OD GRILL ONLY Fits Plastic Oddities receptor drains PBR-400, PBR-406, PGP-300, PSI-280, and PLP-350. Also fits C.P. Industries, Richmond Foundry, Prier Brass, Rapid Fit drains and Pro Flo #PF Screw Holes - 3-3/8 center to center 4T /4 OD GRILL ONLY Fits Plastic Oddities shower drain PFG-600. Fits Sioux Chief #820-2S Screw Holes - 2-5/8 center to center 4T FIT-ALL SNAP-IN STRAINER Fits most 2 pipes Prong length approx.. 1-1/4 4T FIT-ALL SNAP-IN STRAINER Fits most 3 pipes Prong length approx.. 1-1/4 4T FIT-ALL SNAP-IN STRAINER Fits most 4 pipes Prong length approx.. 1-1/4 TRIM TO THE TRADE 8 FAX

14 SHOWER DRAINS *Other drains available. Please call for quote. *Screw holes 2-7/8 inch CTR/CTR* E-Z TEST CAST IRON SHOWER DRAINS Factory assembled with 4T-030 drain trim set 4T /2 IPS 4T IPS CAST IRON SHOWER DRAINS Factory assembled with 4T-030 drain trim set 4T CAULK 4T QUICK CAULK CAST IRON SHOWER DRAIN Factory assembled with 4T-030 drain trim set 4T NO HUB 4T-5NC 2 NO CAULK LOS ANGELES CODE CAST IRON SHOWER DRAIN For cast iron, steel, or plastic pipe Factory assembled with 4T-030 drain trim set 4T-502A 4T-503P ABS GLUE ON SHOWER DRAIN L.A. Code w/ 4T-030 Drain Trim set Factory Assembled PVC GLUE ON SHOWER DRAIN L.A. Code w/ 4T-030 Drain Trim set Factory Assembled CAST IRON PROTECTION DRAINS Factory assembled with 4T-030 drain trim set 4T /2 IPS 4T IPS CAST IRON PROTECTION DRAIN FOR MARBLE SHOWERS & TUBS Factory assembled with 4T-030 drain trim set 4T CAULK TRIM TO THE TRADE 9 FAX

15 ROMAN TUB DRAINS *Other drains available. Please call for quote. *Screw holes 2-7/8 inch CTR/CTR* 4T-055 4T-056 ROMAN TUB DRAIN TOP ONLY Complete with crown and screws REPLACEMENT SCREWS FOR ROMAN TUB DRAINS (2 per bag) E-Z TEST CAST IRON ROMAN TUB DRAINS Assembled complete with 4T-055 top and unplated crown ring Not exposed in this installation 4T /2 IPS 4T IPS CAST IRON ROMAN TUB DRAINS Assembled complete with 4T-055 top and unplated crown ring Not exposed in this installation 4T CAULK W/O GASKET 4T-066A 2 QUICK CAULK W/ GASKET (4T-2JQ) CAST IRON LOS ANGELES CODE ROMAN TUB DRAIN Assembled complete with 4T-055 top, neoprene gasket, and unplated crown ring Not exposed in this installation 4T-5NCTD 2 NO CAULK CAST IRON ROMAN TUB DRAIN Assembled complete with 4T-055 top and unplated crown ring Not exposed in this installation 4T NO HUB CAST IRON PROTECTION DRAIN WITH ROMAN TUB DRAIN TOP FOR MARBLE TUBS Assembled complete with 4T-055 top and unplated crown ring Not exposed in this installation 4T CAULK 4T-6420 CHURCH OF LATTER DAY SAINTS BAPTISMAL FONT DRAIN PACKAGE Polished Chrome Only TRIM TO THE TRADE 10 FAX

16 SINK & BAR STRAINERS 4T-238 MIDGET DUO STRAINER WITH BASKET (4T-239) Complete with nuts & washers 1-1/4 basket depth Fits 2 opening 4T-239 MIDGET DUO BASKET ONLY 4T-240 SINK PLUG WITH 3-PRONG STRAINER (4T-241) Complete with nuts & washers For regular or bar sinks Fits 2 opening 4T-233 JUNIOR BASKET STRAINER WITH BASKET (4T-234) Complete with nuts & washers Fits 2 opening 4T-234 JUNIOR BASKET ONLY 4T-235 JUNIOR BASKET WITH 3-PRONG STRAINER (4T-241) Complete with nuts and washers Fits 2 opening 4T /8 OD 3-PRONG STRAINER TANK LEVERS 4T-190 TANK LEVER WITH 8 ARM Fits most standard toilets Front Mount - Left Side 4T-192A 4T-192B PUSH BUTTON TANK LEVER WITH 6 SIDE MOUNT Available in finishes 1, 2 and 3 Fits Eljer Patrician, Coventry, Briggs Case IV, Emperor, Crane Monterey, Norris Luxury Group, and Duravit-Metro SAME AS 4T-192A WITH 8 ARM TRIM TO THE TRADE 11 FAX

17 TANK LEVERS 4T-193 ARROW TANK LEVER WITH 8 ARM Fits most standard toilets Front Mount - Left Side 4T-194 TANK LEVER WITH ANGLE MOUNT Fits Kohler Wellworth II and Universal Rundle Athens 4T-195 TANK LEVER WITH 8 ARM Fits Eljer New Emblem 4T-196 TANK LEVER WITH 8 ARM Fits most standard toilets Front Mount- Left Side 4T-224 TANK LEVER FOR TOTO Fits Carlyle, Carolina, Supreme, Supreme ADA, Ultimate, Ultramax, Ultramax ADA, CST70314, CST70414 and CST704L14 4T-225 TANK LEVER FOR TOTO Fits Vespin, Drake, and Drake ADA 4T-197 CLOSET TANK ELBOW Size: 2 x 6 x 8 Includes 2 brass slip joint nuts (4T-198) and washers 4T x 2 SLIP JOINT NUTS TRIM TO THE TRADE 12 FAX

18 LAVATORY DRAINS 4T OD x 11/16 H VESSEL SPACER 4T-245 MUSHROOM STYLE PO PLUG WITH OVERFLOW 4T-248 MUSHROOM STYLE FIXED DOME- PO PLUG 4T-246 MUSHROOM STYLE CO PLUG NO OVERFLOW 4T-249 MUSHROOM STYLE FIXED DOME- CO PLUG Fits 1-1/2 opening. Size 1-1/4 OD x 8 4T-247 POP-UP LAVATORY DRAIN ASSEMBLY Fits 1-1/2 opening. Size 1-1/4 OD x 8. Has overflow holes ALL PARTS ARE PLATED 4T PIECE C.O. PLUG Fits 1-1/2 opening. Size: 1-1/4 OD x 5. NO OVERFLOW Includes: Chain & Stopper (4T-175SC) and Crumb Cup (4T-252) 4T CRUMB CUP 4T PIECE P.O. PLUG (GRID DRAIN) Fits 1-1/2 opening. Size 1-1/4 OD x 8. Has overflow holes ALL PARTS ARE PLATED 4T-251N 2 PIECE C.O. PLUG (GRID DRAIN) WITHOUT OVERFLOW Fits 1-1/2 opening. Size 1-1/4 OD x 8 ALL PARTS ARE PLATED 4T PIECE LIFT & TURN P.O. PLUG Fits 1-1/2 opening. Size: 1-1/4 OD x 8. Has overflow holes ALL PARTS ARE PLATED 4T-253N 2 PIECE LIFT & TURN C.O. PLUG WITHOUT OVERFLOW Fits 1-1/2 opening. Size: 1-1/4 OD x 8 ALL PARTS ARE PLATED TRIM TO THE TRADE 13 FAX

19 P - TRAPS (17 Gauge) INCLUDES FLANGE 4T /4 X 1-1/4 P - TRAP (4T-259) FLANGE 4T-254K WITH 14 WALL BEND (4T-259) FLANGE 4T-2551D 1-1/2 X 1-1/4 REDUCED NUT(4T-258) FLANGE 4T-2551K WITH 14 WALL BEND (4T-258) FLANGE 4T /2 X 1-1/2 P - TRAP (4T-258) FLANGE 4T-2566K WITH 14 WALL BEND (4T-258) FLANGE 4T-255D 1-1/2 X 1-1/4 REDUCED NECK (4T-258) FLANGE 4T-255K WITH 14 WALL BEND (4T-258) FLANGE 4T /4 OD HIGH BOX FLANGE 4T /2 OD HIGH BOX FLANGE P - TRAPS WITH CLEANOUT Flange included 4T /4 x 1-1/4 (4T-259) FLANGE 4T /2 x 1-1/4 (4T-258) FLANGE 4T /2 x 1-1/2 (4T-258) FLANGE LOS ANGELES CODE P - TRAPS Flange not included 4T /2 x 1-1/2 Also used as Bidet Trap 4T /2 x 1-1/4 4T-524 NEW ENGLAND TRAP WITH FLANGE (4T-263) Fits 1 1/2 x 1 1/2 Includes Conversion Nut 1 1/2 x 1 1/4 MILWAUKEE UTILITY TRAP Flange included (4T-2588) 4T /2 x 1-1/2 4T /2 x 1-1/4 TRIM TO THE TRADE 14 FAX

20 S - TRAPS (17 Gauge) Flange included 4T /4 x 1-1/4 4T /2 x 1-1/4 4T /2 x 1-1/2 (4T-259) FLANGE (4T-258) FLANGE (4T-258) FLANGE SLIP JOINT NUTS 4T /4 x 1-1/4 4T /2 x 1-1/4 4T /2 x 1-1/2 4T x2 TAILPIECES 4T /2 OD x 8 FLANGED SINK TAILPIECE TAILPIECES - THREADED BOTH ENDS 4T /4 OD x 8 4T /4 OD x 12 4T /2 OD x 8 4T /2 OD x 12 TRIM TO THE TRADE 15 FAX

21 SLIP JOINT ELBOWS / WASTE BEND ARMS 4T /4 OD X 8 4T /2 OD X 8 4T /2 OD X 11-1/2 4T /2 OD X 14 SLIP JOINT EXTENSION TUBES 4T /2 OD x 8 4T-267A 1-1/2 OD x 12 4T /4 OD x 8 4T-268A 1-1/4 OD x 12 CLOSET TANK ELBOWS 4T-197 CLOSET TANK ELBOW Size: 2 x 6 x 8 Includes 2 brass slip joint nuts (4T-198) and washers 4T x 2 SLIP JOINT NUT TRIM TO THE TRADE 16 FAX

22 DOUBLE OFFSETS 12 DOUBLE OFFSET 22 Gauge. Includes slip joint nut and 2 neoprene washers 4T /4 OD 4T /2 OD COVER CASINGS 4T OD x 10 COVER CASING Covers 1-1/2 IPS steel pipe 4T-265A 2 OD x 6 COVER CASING 4T-265G 2 OD x 6 SINK FUNNEL Bell OD approximately 3-3/8 4T /16 OD x 10 COVER CASING For use with steel pipe under lavatory when pipe extends from wall Fits over 1/2 I.P.S. Pipe 4T /16 OD SURE GRIP FLANGE LOW PATTERN Available in finishes 1 and 2 only 4T-283C 3-1/2 COVER TUBE For 1/2 nominal copper tube TRIM TO THE TRADE 17 FAX

23 BATH STRAINERS 4T-175 OVERFLOW STRAINER SET Strainer (4T-175SO), Bolt & Ring (4T-182), and Beaded Chain (4T-175SC) & Stopper 4T-175SO 3-1/8 OD OVERFLOW STRAINER Use with chain & stopper style waste & overflow 4T-175SC 20 BEADED CHAIN & 1-1/2 STOPPER 4T-182 OVERFLOW BOLT & RING 1/4-20 X 1-1/2 4T /8 OD 3-PRONG SNAP-IN STRAINER Fits 4T-1833 strainer body Use with trip lever style waste & overflow 4T /8 OD 3-PRONG SNAP-IN STRAINER Use with strainer body 4T-304 Used with 4T-240 sink plug 4T-187 Dome Strainer w/ Screw (4T-1870 & 4T-1869) Fits Gerber style strainer body Countersunk center hole for #10 oval head screw (4T-1869) 4T /8 OD DOME STRAINER ONLY 4T x 2 MACHINE SCRE For use with dome strainer (4T-1870) 4T-183A BATHTUB STRAINER SET Includes: Strainer Body (4T-1833) 4T /8 BATHTUB STRAINER BODY ONLY Fine thread (16 per inch) 4T-304 BATHTUB STRAINER SET (4T-183A) WITH 3-PRONG STRAINER (4T-184) and reducing bushing (4T-186P) Fits tub waste & overflow with 1-1/2 shoe Fits Price Pfister & Gerber Course threads (11-1/2 per inch) TRIM TO THE TRADE 18 FAX

24 BATH STRAINERS 4T /8 OD LIFT & TURN BATH PLUG Fine thread (16 per inch) 4T-199X 4T-185 WITH REDUCING BUSHING Includes Reducing Bushing (4T-186P) 4T /8 PUSH/PULL BATH PLUG Fine thread (16 per inch) 4T-336 4T-335 WITH REDUCING BUSHING Bushing (4T-186P) 4T-1850A 1-5/8 OD TIP-TOE DRAIN STOPPER Fine thread (16 per inch) 4T-1850B 4T-186 REDUCING BUSHING Reduces shoe size from 1-1/2 to 1-3/8 Available in rough brass only. Coarse Thread Interior threads - 16 per inch. 1-3/8 Dia Exterior threads /2 per inch. 1-1/2 Dia 4T-186P 4T-186K 4T-186KP 4T-1850A WITH BUSHING Includes Reducing Bushing (4T-186P) PLASTIC REDUCING BUSHING Same as 4T-186 only plastic REDUCING BUSHING Fits Kohler waste & overflow items. Available in rough brass only. Fine Thread Interior threads /2 per inch Exterior threads - 16 per inch PLASTIC REDUCING BUSHING Same as 4T-186K only plastic 4T-187 DOME STRAINER SET Includes: Dome Strainer (4T-1870) and 1-3/4 Screw (4T-1869) 4T x 2 MACHINE SCREW 4T /8 OD DOME STRAINER ONLY Fits Gerber style strainer body Countersunk center hole for #10 oval head screw (4T-1869) 4T-169 TRIP LEVER DRAIN SET INCLUDES 4T-187 and 4T-170X TRIM TO THE TRADE 19 FAX

25 W & O CONVERSION KITS 4T-1900C TRIP LEVER STYLE CONVERSION KIT Includes: Trip Lever Face Plate & Screws (4T-170X) Bathtub Strainer Set (4T-183A) Reducing Bushing (4T-186P)Coarse Thread 4T-1900CB With Brass Bushing 4T-1901C TRIP LEVER BATHTUB STYLE CONVERSION KIT Includes: Trip Lever Face Plate & Screws (4T-170X) Bathtub Strainer (4T-304) Reducing Bushing (4T-186P) Fine Thread 4T-1901CB With Brass Bushing 4T-1902C 1-5/8 LIFT & TURN BATH PLUG STYLE CONVERSION KIT Includes: 2-hole Face Plate & Screws (4T-174X) Bath Plug (4T-185) Reducing Bushing (4T-186P) 4T-1902CB With Brass Bushing 4T-1905C 4T-1902C WITH 1-HOLE FACE PLATE (4T-173X) Includes Conversion Bar ( 4T-171-Kit ) 4T-1905CB With Brass Bushing 4T-1903C 1-5/8 TIP-TOE DRAIN STYLE CONVERSION KIT Includes: 2-hole Face Plate & Screws (4T-174X) Tip-Toe Drain (4T-1850A) Reducing Bushing (4T-186P) 4T-1903CB With Brass Bushing 4T-1904C 4T-1903C With 1-Hole Face Plate (4T-173X) Includes Conversion Bar (4T-171 Kit) 4T-1904CB With Brass Bushing 4T-1906C PUSH AND PULL STYLE CONVERSION KIT Includes: 2 hole face plate ( 4T-174X ) Bath Plug ( 4T-335 ) Reducing Bushing ( 4T-186 P ) 4T-1906CB With Brass Bushing 4T-1907C 4T-1906C WITH ONE HOLE FACEPLATE ( 4T-173X ) Includes Conversion Bar (4T-171 Kit) 4T-1907CB With Brass Bushing IF BRASS BUSHING NEEDED, ORDER CB Ex: 4T-1900CB TRIM TO THE TRADE 20 FAX

26 OFFSET BATH SUPPLIES 4T-188 SINGLE OFFSET BATH SUPPLY SET OF 2 Includes: 1/2 OD risers, nuts, washers and flanges 4T-189 DOUBLE OFFSET BATH SUPPLY SET OF 2 Includes: 1/2 OD risers, nuts, washers and flanges 4T-188K REPLACEMENT KIT FOR OFFSET BATH SUPPLIES For use with 4T-188 and 4T-189 Includes 4 slip joint nuts, 4 cone washers and 4 friction rings FACE PLATES & ACCESSORIES 4T-169 TRIP LEVER DRAIN SET Includes 4T-170X And 4T-187 4T-170X TRIP LEVER STYLE FACE PLATE and screws 4T-172 1/4 X 1-1/2 BRASS OVAL HEAD SLOTTED SCREW Use with all styles of face plates. 4T-173X 1 HOLE FACE PLATE With screw For use with chain & stopper 4T-174X 2 HOLE FACE PLATE With screws 4T-171 OVERFLOW BAR With 2 Screws Converts two hole application to one hole 4T-175 OVERFLOW STRAINER SET Strainer (4T-175SO), Bolt & Ring (4T-182), and Beaded Chain (4T-175SC) & STOPPER 4T-175SO 3-1/8 OD OVERFLOW STRAINER NOT Available in #11 4T-175SC 20 BEADED CHAIN & STOPPER 4T-182 OVERFLOW BOLT & RING 1/4-20 X 1-1/2 TRIM TO THE TRADE 21 FAX

27 W & O - TRIP LEVER STYLE TRIP LEVER STYLE WASTE & OVERFLOW - 1 1/2 OD TUBULAR Includes: Face Plate & Screws (4T-170X) and Strainer Set (4T-183A) 4T-176X MAXIMUM MAKE-UP IS 16 4T-177X MAXIMUM MAKE-UP IS 22 TRIP LEVER STYLE WASTE & OVERFLOW - 1 1/2 OD TUBULAR EXPOSED PARTS ARE PLATED FOR CLAW FOOT TUBS Includes: Face Plate & Screws (4T-170X), Strainer Set (4T-183A) and Flange (4T-2588) 4T-1760X MAXIMUM MAKE-UP IS 16 4T-9922D MAXIMUM MAKE-UP IS 22 W & O - LIFT & TURN STYLE LIFT & TURN STYLE WASTE & OVERFLOW - 1 1/2 OD TUBULAR Includes: Face Plate & Screws (4T-174X) and Bath Plug (4T-185) 4T-178X MAXIMUM MAKE-UP IS 16 4T-179X MAXIMUM MAKE-UP IS 22 4T-340- SAME AS 4T-178X EXCEPT W/4T-335 PUSH/PULL 4T-341- SAME AS 4T-179X EXCEPT W/4T-335 PUSH/PULL LIFT & TURN STYLE WASTE & OVERFLOW - 1 1/2 OD TUBULAR EXPOSED PARTS ARE PLATED FOR CLAW FOOT TUBS Includes: Face Plate & Screws (4T-174X) and Bath Plug (4T-185) and flange (4T- 2588) 4T-7711D MAXIMUM MAKE-UP IS 16 4T-7722D MAXIMUM MAKE-UP IS 22 4T-342- SAME AS 4T-7711D EXCEPT W/4T-335 PUSH/PULL 4T-343- SAME AS 4T-7722D EXCEPT W/4T-335 PUSH/PULL TRIM TO THE TRADE 22 FAX

28 W& O- CHAIN & STOPPER STYLE CHAIN & STOPPER STYLE WASTE & OVERFLOW - 1 1/2 OD TUBULAR Includes: Overflow Set (4T-175) and Strainer Body (4T-1833) 4T-180A MAXIMUM MAKE-UP IS 16 4T-180B MAXIMUM MAKE-UP IS 22 CHAIN & STOPPER STYLE WASTE & OVERFLOW - 1 1/2 OD TUBULAR EXPOSED PARTS ARE PLATED FOR CLAW FOOT TUBS Includes: Overflow Set (4T-175), Strainer Body (4T-1833) and Flange (4T-2588) 4T-1800A MAXIMUM MAKE-UP IS 16 4T-9855D MAXIMUM MAKE-UP IS 22 CHAIN & STOPPER STYLE WASTE & OVERFLOW - 1 1/2 OD TUBULAR Includes: Chain & Stopper (4T-175SC), Strainer Body (4T-1833) and Face Plate (4T-174X) 4T-180X MAXIMUM MAKE-UP IS 16 4T-181X MAXIMUM MAKE-UP IS 22 TRIM TO THE TRADE 23 FAX

29 W&O-TIP-TOE STYLE TIP-TOE STYLE WASTE & OVERFLOW - 1 1/2 OD TUBULAR Includes: Face Plate (4T-174X) and Tip-Toe Drain (4T-1850A) 4T-1802A MAXIMUM MAKE-UP IS 16 4T-1803A MAXIMUM MAKE-UP IS 22 TIP-TOE STYLE WASTE & OVERFLOW - 1 1/2 OD TUBULAR EXPOSED PARTS ARE PLATED FOR CLAW FOOT TUBS Same as above with Flange (4T-2588) 4T-1804A MAXIMUM MAKE-UP IS 16 4T-1805A MAXIMUM MAKE-UP IS 22 TUBES FOR WASTE & OVERFLOW 1-1/2 OD OVERFLOW TUBES - THREADED ONE END 4T-1773A 1-1/2 OD X 3 4T-1774A 1-1/2 OD X 4 4T-1775A 1-1/2 OD X 8 4T-1776A 1-1/2 OD X 9-1/2 4T-1777A 1-1/2 OD X /8 OD OVERFLOW TUBES - THREADED ONE END Available only in finishes 1 and 2 4T-1779A 1-3/8 OD X 3 4T-1780A 1-3/8 OD X 4 4T-1781A 1-3/8 OD X 8 4T-1782A 1-3/8 OD X 12 4T-1783A 1-3/8 OD X 18 TRIM TO THE TRADE 24 FAX

30 SHOWER ROD & HOLDERS 4T OD X 6 SHOWER ROD ONLY Does not include shower curtain pins or rod holder 4T-119 SHOWER CURTAIN PIN SET Packaged 12 pins per bag 4T-112 ADJUSTABLE ROD HOLDER SET Available in finishes 1, 2, 3, 6, 31, 34, 50 and only 4T-1160 SHOWER ROD FLANGE SET WITH CONCEALED SCREWS Set of 2 4T-1170 SHOWER ROD FLANGE SET WITH EXPOSED SCREWS Set of 2 SHOWER HEADS 4T-120 BRASS RAIN SHOWER HEAD 1/2 IPS With Anti Clog Nozzle-8 diameter with flow restrictor ONLY Available in #1,2,30,31,34 and 50 4T-121 BRASS SHOWER HEAD 2-1/4 diameter face with flow restrictor 4T-122 BRASS SHOWER HEAD 2-3/4 diameter face with 6 shower jets Includes flow restrictor 4T-155 SPEAKMAN #2 SHOWER HEAD 2-3/4 diameter face with 6 shower jets Speakman part #1252 with flow restrictor 4T-141 LARGE BRASS SHOWER HEAD 3-1/2 diameter face with 8 shower jets Includes flow restrictor TRIM TO THE TRADE 25 FAX

31 SHOWER ARMS & FLANGES SHOWER ARMS WITH FLANGE 4T BRASS SHOWER ARM with 4T-132 Flange 4T BRASS SHOWER ARM with 4T-132 Flange 4T BRASS SHOWER ARM with 4T-132 Flange 4T-151D S SHOWER ARM WITH 4T-132 FLANGE Raises shower head approx. 10 from inlet 4T HOOK SHOWER ARM WITH WELDED FLANGE Available finish # 1,2,30,31,34,50 4T-149 1/2 X12 L SHOWER ARM WITH 4T-132 FLANGE 4T-415N 4T-416N 4T-417N 4T-418N 4T-419N 4T-421N 4T-420N 4T-422N 4T-423N CEILING MOUNT SHOWER ARMS 1/2 X12 Flange not included 1/2 X18 Flange not included 1/2 X24 Flange not included 1/2 X30 Flange not included 1/2 X36 Flange not included 1/2 X42 Flange not included 1/2 X48 Flange not included 1/2 X54 Flange not included 1/2 X60 Flange not included 4T-156 BRASS VOLUME CONTROL 1/2 Inlet, 1/2 Outlet with O ring seal Not 100% sealing 4T /8 OD SHOWER ARM FLANGE Sure Grip style 4T /4 OD SHOWER ARM FLANGE WITH SET SCREW 4T-153 CAST BRASS SHOWER ARM FLANGE WITH SET SCREW TRIM TO THE TRADE 26 FAX

32 TUB SPOUTS ZINC DIE CAST TUB SPOUT Available in finishes 1, 2, 3, and 13, 31, 34 and 50 4T-160 1/2 IPS FRONT CONNECT 4T-164 QUICK CONNECT BRASS TUB SPOUTS Available in all finishes 4T-165 1/2 IPS FRONT CONNECT 4T-166 1/2 IPS BACK CONNECT 4T /2 BRASS TUB SPOUT Includes reducing bushing 1/2-3/4 IPS BACK CONNECT DIVERTER SPOUTS ZINC DIE CAST DIVERTER SPOUTS Available in finishes 1, 2, 3, 13, 31, 34 and 50 4T-162 1/2 IPS FRONT CONNECT 4T-163 QUICK CONNECT BRASS DIVERTER SPOUT Includes reducing bushing Available in all finishes 4T-167 1/2-3/4 IPS BACK CONNECT TRIM TO THE TRADE 27 FAX

33 REMODEL PLATES 4T-541 ONE HOLE REMODEL PLATE Fits Moen and Delta Available in finish #1, #13, #16, #19, #20, #2, #31, #34, and #50. 4T-542 TWO HOLE REMODEL PLATE For two valve diverter Available in finish #1 (Bright Stainless Steel) 4T-543 THREE HOLE REMODEL PLATE For three valve diverter Available in finish #1 (Bright Stainless Steel) TRIM TO THE TRADE 28 FAX

34 CLOSET SUPPLY SETS EACH SET CONSISTS OF (1) EACH OF LISTED ITEMS. * NOT AVAILABLE IN #11 * 4T-715 CLOSET SUPPLY SET 4T-715X 4T-715 WITH CROSS HANDLE Includes: 4T /8 IPS x 3/8 OD Comp Angle Stop 4T /8 OD x 20 Flat Head Rigid Supply Tube 4T-430N 3/8 x 4 Nipple 4T /8 IPS Sure Grip Flange 4T-716 CLOSET SUPPLY SET 4T-716X 4T-716 WITH CROSS HANDLE Includes: 4T-286 1/2 IPS x 1/2 or 7/16 SJ Angle Stop 4T-2781D 1/2 OD x 20 Flat Head Rigid Supply Tube 4T-405N 1/2 x 4 Nipple 4T-284 1/2 IPS Sure Grip Flange 4T-717 CLOSET SUPPLY SET 4T-717X 4T-717 WITH CROSS HANDLE Includes: 4T /2 Comp x 3/8 OD Comp Angle Stop 4T /8 OD x 20 Flat Head Rigid Supply Tube 4T-285 5/8 OD Sure Grip Flange 4T-718 CLOSET SUPPLY SET 4T-718X 4T-718 WITH CROSS HANDLE Includes: 4T-287 1/2 Comp x 1/2 or 7/16 SJ Angle Stop 4T-2781D 1/2 OD x 20 Flat Head Rigid Supply Tube 4T-285 5/8 OD Sure Grip Flange TRIM TO THE TRADE 29 FAX

35 LAVATORY SUPPLY SETS EACH SET CONSISTS OF (2) EACH OF LISTED ITEMS. * NOT AVAILABLE IN #11 * 4T-725 LAVATORY SUPPLY SET 4T-725X 4T-725 WITH CROSS HANDLE Includes: 4T /8 IPS x 3/8 OD Comp Angle Stop (2) 4T T-430N 3/8 OD x 20 Bullnose Rigid Supply Tube (2) 3/8 x 4 Nipple (2) 4T /8 IPS Sure Grip Flange (2) 4T-726 LAVATORY SUPPLY SET 4T-726X 4T-726 WITH CROSS HANDLE Includes: 4T /2 IPS x 3/8 OD Comp Angle Stop (2) 4T /8 OD x 20 Bullnose Rigid Supply Tube (2) 4T-405N 1/2 x 4 Nipple (2) 4T-284 1/2 IPS Sure Grip Flange (2) 4T-727 LAVATORY SUPPLY SET 4T-727X 4T-727 WITH CROSS HANDLE Includes: 4T-286 1/2 IPS x 1/2 or 7/16 SJ Angle Stop (2) 4T /2 OD x 20 Bullnose Rigid Supply Tube (2) 4T-405N 1/2 x 4 Nipple (2) 4T-284 1/2 IPS Sure Grip Flange (2) 4T-728 LAVATORY SUPPLY SET 4T-728X 4T-728 WITH CROSS HANDLE Includes: 4T /2 Comp x 3/8 OD Comp Angle Stop (2) 4T /8 OD x 20 Bullnose Rigid Supply Tube (2) 4T-285 5/8 OD Sure Grip Flange (2) TRIM TO THE TRADE 30 FAX

36 FLAT HEAD RIGID SUPPLY TUBES NOT AVAILABLE IN FINISH #11 FLAT HEAD RIGID SUPPLY TUBES For toilet applications 4T /2 OD x 12 4T-2781D 1/2 OD x 20 4T /8 OD x 12 4T /8 OD x 20 BULLNOSE RIGID SUPPLY TUBES NOT AVAILABLE IN FINISH #11 BULLNOSE RIGID SUPPLY TUBES For sink & lavatory applications 4T /2 OD x 12 4T /2 OD x 20 4T /2 OD x 30 4T /8 OD x 12 4T /8 OD x 20 4T /8 OD x 30 RIGID SUPPLY TUBES NOT AVAILABLE IN FINISH #11 RIGID SUPPLY TUBES 4T /2 OD x 12 4T-281 1/2 OD x 24 4T-282 1/2 OD x 36 4T /8 OD x 12 4T /8 OD x 24 4T /8 OD x 36 TRIM TO THE TRADE 31 FAX

37 CORRUGATED RISERS CORRUGATED RISERS Not available in finish #11 4T-277 1/2 OD x 9 4T-278D 1/2 OD x 12 4T-279 1/2 OD x 15 4T-280 1/2 OD x 20 4T /8 OD x 9 4T /8 OD x 12 4T /8 OD x 15 4T /8 OD x 20 BRAIDED RISERS SINK & LAVATORY APPLICATIONS and Available in finishes #1,#2, #31 and #50 4T-295 3/8 COMPRESSION x 1/2 IPS x 12 BRAIDED RISER 4T-296 3/8 COMPRESSION x 1/2 IPS x 20 BRAIDED RISER CLOSET APPLICATIONS Available in finishes #1, #2, #31 and #50 4T-297 3/8 COMPRESSION x 7/8 PLASTIC BALLCOCK CONNECTOR x 12 BRAIDED RISER 4T-298 3/8 COMPRESSION x 7/8 PLASTIC BALLCOCK CONNECTOR x 16 BRAIDED RISER TRIM TO THE TRADE 32 FAX

38 1/2" IPS ANGLE STOPS 1/2 IPS x 1/2 or 7/16 SLIP JOINT ANGLE STOP Use with 1/2 OD riser 4T-286 WITH OVAL HANDLE Not available in finish #11 4T-286X WITH CROSS HANDLE 1/2 IPS x 3/8 OD COMPRESSION ANGLE STOP Use with 3/8 OD riser 4T WITH OVAL HANDLE Not available in finish #11 4T-28638X WITH CROSS HANDLE 1/2 IPS x 1/2 OD COMPRESSION ANGLE STOP Use with 1/2 OD riser 4T WITH OVAL HANDLE Not available in finish #11 4T-39612X WITH CROSS HANDLE 1/2" COMPRESSION ANGLE STOPS 1/2 NOMINAL COMPRESSION x 1/2 or 7/16 SLIP JOINT ANGLE STOP Use with 1/2 OD riser 4T-287 WITH OVAL HANDLE Not available in finish #11 4T-287X WITH CROSS HANDLE TRIM TO THE TRADE 33 FAX

39 1/2" COMPRESSION ANGLE STOPS 1/2 NOMINAL COMPRESSION x 3/8 OD COMPRESSION ANGLE STOP Use with 3/8 OD riser 4T WITH OVAL HANDLE Not available in finish #11 4T-28738X WITH CROSS HANDLE 4T QUARTER TURN (4T-28738) Not Available with Cross handle or finish #11 1/2 NOMINAL COMPRESSION x 1/2 OD COMPRESSION ANGLE STOP Use with 1/2 OD riser 4T WITH OVAL HANDLE Not available in finish #11 4T-39312X WITH CROSS HANDLE 3/8" IPS ANGLE STOP 3/8 IPS x 3/8 OD COMPRESSION ANGLE STOP Use with 3/8 OD riser 4T WITH OVAL HANDLE Not available in finish #11 4T-38638X WITH CROSS HANDLE 3/8 IPS x 1/2 OD COMPRESSION ANGLE STOP Use with 1/2 OD riser 4T WITH OVAL HANDLE Not available in finish #11 4T-39238X WITH CROSS HANDLE 3/8 IPS x 3/8 IPS ANGLE STOP Use with a nipple instead of a riser 4T WITH OVAL HANDLE Not available in finish #11 4T-50038X WITH CROSS HANDLE TRIM TO THE TRADE 34 FAX

40 1/2" IPS STRAIGHT STOPS 1/2 IPS x 1/2 or 7/16 SLIP JOINT STRAIGHT STOP Use with 1/2 OD riser 4T-288 WITH OVAL HANDLE Not available in finish #11 4T-288X WITH CROSS HANDLE 1/2 IPS x 3/8 OD COMPRESSION STRAIGHT STOP Use with 3/8 OD riser 4T WITH OVAL HANDLE Not available in finish #11 4T-28838X WITH CROSS HANDLE 1/2 IPS x 1/2 OD COMPRESSION STRAIGHT STOP Use with 1/2 OD riser 4T WITH OVAL HANDLE Not available in finish #11 4T-39812X WITH CROSS HANDLE 1/2" COMPRESSION STRAIGHT STOP 1/2 NOM COMPRESSION x 1/2 OR 7/16 SLIP JOINT STRAIGHT STOP Use with 1/2 OD riser 4T-289 WITH OVAL HANDLE Not available in finish #11 4T-289X WITH CROSS HANDLE 1/2 NOM COMPRESSION x 3/8 OD COMPRESSION STRAIGHT STOP Use with 3/8 OD riser 4T WITH OVAL HANDLE Not available in finish #11 4T-28938X WITH CROSS HANDLE 4T QUARTER TURN (4T-28938) Not available with cross handle or finish #11 TRIM TO THE TRADE 35 FAX

41 1/2" COMPRESSION STRAIGHT STOP 1/2 NOM COMPRESSION x 1/2 OD COMPRESSION STRAIGHT STOP Use with 1/2 OD riser 4T WITH OVAL HANDLE Not available in finish #11 4T-39412X WITH CROSS HANDLE 3/8" IPS STRAIGHT STOPS 3/8 IPS x 3/8 OD COMPRESSION STRAIGHT STOP Use with 3/8 OD riser 4T WITH OVAL HANDLE Not available in finish #11 4T-38838X WITH CROSS HANDLE STOPS W/ 5" EXTENSION TUBES 1/2 NOM SWEAT x 1/2 OD COMP ANGLE STOP WITH ATTACHED 5 EXT. TUBE Includes small bell flange (4T-307) Not available in finish #11 4T WITH OVAL HANDLE 4T-29212X WITH CROSS HANDLE 1/2 NOM SWEAT x 3/8 OD COMP ANGLE STOP WITH ATTACHED 5 EXT TUBE Includes small bell flange (4T-307) Not available in finish #11 4T WITH OVAL HANDLE 4T-29238X WITH CROSS HANDLE TRIM TO THE TRADE 36 FAX

42 STOPS W/ 5" EXTENSION TUBES 1/2 NOM SWEAT x 1/2 OD COMP STRAIGHT STOP WITH ATTACHED 5 EXT TUBE Includes small bell flange (4T-307) Not available in finish #11 4T WITH OVAL HANDLE 4T-29412X WITH CROSS HANDLE 1/2 NOM SWEAT x 3/8 OD COMP STRAIGHT STOP WITH ATTACHED 5 EXT TUBE Includes small bell flange (4T-307) Not available in finish #11 4T WITH OVAL HANDLE 4T-29438X WITH CROSS HANDLE STOPS W/ CORRUGATED RISERS 1/2 IPS ANGLE STOP W/ ATTATCHED RISER Includes 1/2 IPS Sure Grip Flange (4T-284). Not available in finish #11 4T /8 OD x 9 FLEX RISER 4T-3709X WITH CROSS HANDLE 4T /8 OD x 12 FLEX RISER 4T-3712X WITH CROSS HANDLE 4T /8 OD x 15 FLEX RISER 4T-3715X WITH CROSS HANDLE 4T /8 OD x 20 FLEX RISER 4T-3720X WITH CROSS HANDLE 1/2 COMPRESSION ANGLE STOP W/ ATTATCHED RISER Includes 5/8 OD Sure Grip Flange (4T-285). Not available in finish #11 4T /8 OD x 9 FLEX RISER 4T-3809X WITH CROSS HANDLE 4T /8 OD x 12 FLEX RISER 4T-3812X WITH CROSS HANDLE 4T /8 OD x 15 FLEX RISER 4T-3815X WITH CROSS HANDLE 4T /8 OD x 20 FLEX RISER 4T-3820X WITH CROSS HANDLE TRIM TO THE TRADE 37 FAX

43 38

44 NIPPLES 4T-400N 1/2 IPS X 1-1/2 4T-401N 1/2 IPS X 2 4T-402N 1/2 IPS X 2-1/2 4T-403N 1/2 IPS X 3 4T-404N 1/2 IPS X 3-1/2 4T-405N 1/2 IPS X 4 4T-406N 1/2 IPS X 4-1/2 4T-407N 1/2 IPS X 5 4T-408N 1/2 IPS X 5-1/2 4T-409N 1/2 IPS X 6 4T-410N 1/2 IPS X 7 4T-411N 1/2 IPS X 8 4T-412N 1/2 IPS X 9 4T-413N 1/2 IPS X 10 4T-414N 1/2 IPS X 11 4T-415N 1/2 IPS X 12 4T-416N 1/2 IPS X 18 4T-417N 1/2 IPS X 24 4T-418N 1/2 IPS X 30 4T-419N 1/2 IPS X 36 4T-421N 1/2 IPS X 42 4T-420N 1/2 IPS X 48 4T-422N 1/2 IPS X 54 4T-423N 1/2 IPS X 60 4T-425N 3/8 IPS X 1-1/2 4T-426N 3/8 IPS X 2 4T-427N 3/8 IPS X 2-1/2 4T-428N 3/8 IPS X 3 4T-429N 3/8 IPS X 3-1/2 4T-430N 3/8 IPS X 4 4T-431N 3/8 IPS X 4-1/2 4T-432N 3/8 IPS X 5 4T-433N 3/8 IPS X 5-1/2 4T-434N 3/8 IPS X 6 4T-435N 3/8 IPS X 7 4T-436N 3/8 IPS X 8 4T-437N 3/8 IPS X 9 4T-438N 3/8 IPS X 10 4T-439N 3/8 IPS X 11 4T-440N 3/8 IPS X 12 TRIM TO THE TRADE 39 FAX

45 SURE GRIP FLANGES SHALLOW PATTERN SURE GRIP FLANGES 4T /2 OD 4T /2 IPS 4T OD 4T /4 OD LOW PATTERN SURE GRIP FLANGES 4T-284 1/2 IPS 4T /8 IPS 4T-285 5/8 OD (1/2 Comp) HIGH BOX FLANGES DEEP PATTERN HIGH BOX FLANGES 4T /2 OD 4T /4 OD 4T /2 IPS 4T OD BELL FLANGES DEEP PATTERN BELL FLANGES 4T /2 OD 4T /4 OD 4T /2 IPS Available in Polished Brass only TRIM TO THE TRADE 40 FAX

46 BELL FLANGES 4T-303 1/2 OD Use with 4T-188 and 4T-189 4T-306 5/8 OD 4T /16 OD Use with stops with 5 sweat ext. tube 4T-308 1/2 IPS 4T /8 IPS LOG LIGHTER TRIM 4T-1916 LOG LIGHTER KIT For Price Pfister, Arrowhead Brass, and Siuox Chief Includes: Exposed flange and key (4T-1917) 4T /16 x 3 LOG LIGHTER KEY TRIM TO THE TRADE 41 FAX

47 NUMERICAL SUFFIX 4T T T T T T T T T T T T T T-034 5,6 4T T T T T-042GC 5 4T T T-045 5,7 4T T T T T-049J 7 4T T T T T T T-066A 10 4T T-0663J 8 8 4T T T-077G 8 4T T T-092 6,8 4T-093 6,8 4T T T T T T T T T T T T-141 4T T T T T T-151D 26 4T T T T T T T T T T T T T , 21 4T-170X 21 4T T T-173X 21 4T-174X 21 4T ,21 4T-175SC 18,21 4T-175SO 18,21 4T-1760X 22 4T-176X 22 4T-177X 22 4T-1773A 24 4T-1774A 24 4T-1775A 24 4T-1776A 24 4T-1777A 24 4T-1779A 24 4T-1780A 24 4T-1781A 24 4T-1782A 24 4T-1783A 24 4T-178X 22 4T-179X 22 4T-1800A 23 4T-1802A 24 4T-1803A 24 4T-1804A 24 4T-1805A 24 4T-180A 23 4T-180B 23 4T-180X 23 4T-181X 23 4T ,21 4T T-183A 4T T T-1850A 19 4T-1850B 19 4T ,19 4T T-186K 19 4T-186KP 19 4T-186P 19 4T ,19 4T ,19 4T T-188K 21 4T T T-1900C 4T-1901C 4T-1902C T-1903C 20 4T-1904C 20 4T-1905C 20 4T-1906C 20 4T-1907C 20 4T T T-192A 11 4T-192B 11 4T T T T T ,16 4T ,15,16 4T-199X 19 4T T T T T T T T-209K 2 4T T T T T-213A 2 4T-213K 2 4T-213S 2 4T T T-215 KIT 4 4T-215B 4 4T-215 BC KIT 4 4T-215C 4 4T T-216KIT 4 4T T T T T T T T T T T T T T T T T ,18 4T T-243 4T T T T T T T T-251N 13 4T T T-253N 13 4T T-254K 14 4T-255D 14 4T-255K 14 4T-2551D 14 4T-2551K 14 4T T T T-2566K 14 4T T T T ,40 4T T ,40 4T T T T T T T T T-265A 17 4T-265G 17 4T T T-267A 16 4T T-268A 16 4T T T T T T-2781D 31 4T T-278D 32 4T T T T T T T T T T T T T T-283C 17 4T T T T T T T T T-286X 33 4T T-28638X 33 4T T-287X 33 4T T-28738X 34 4T T-288X 35 4T T-28838X 35 TRIM TO THE TRADE 42 FAX

48 NUMERICAL SUFFIX 4T T-289X 35 4T T-28938X 35 4T T-29212X 36 4T T-29238X 36 4T T T-29412X 37 4T T-29438X 37 4T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T-3709X 37 4T T T-3712X 37 4T T-3715X 37 4T T-3720X 37 4T T-3809X 37 4T T-3812X 37 4T T-3815X 37 4T T-3820X 37 4T T-38638X 34 4T T-38838X 36 4T T-39238X 34 4T T-39312X 34 4T T-39412X 36 4T T-39612X 33 4T T-39812X 35 4T-400N 39 4T-401N 39 4T-402N 39 4T-403N 39 4T-404N 39 4T-405N 39 4T-406N 39 4T-407N 39 4T-408N 39 4T-409N 39 4T-410N 39 4T-411N 39 4T-412N 39 4T-413N 39 4T-414N 39 4T-415N 26, 39 4T-416N 26, 39 4T-417N 26, 39 4T-418N 26, 39 4T-419N 26, 39 4T-420N 26, 39 4T-421N 26, 39 4T-422N 26, 39 4T-423N 26, 39 4T T-425N 39 4T-426N 39 4T-427N 39 4T-428N 39 4T-429N 39 4T-430N 39 4T-431N 39 4T-432N 39 4T-433N 39 4T-434N 39 4T-435N 39 4T-436N 39 4T-437N 39 4T-438N 39 4T-439N 39 4T-440N 39 4T T T T-50038X 34 4T-502A 9 4T-503P 9 4T T T T T T T-5NC 9 4T-5NCTD 4T T T T T T T T T T T T-715X 29 4T T-716X 29 4T T-717X 29 4T T-718X 29 4T T-725X 30 4T T-726X 30 4T T-727X 30 4T T-728X 30 4T-7711D 22 4T-7722D 22 4T-9855D 23 4T-9922D 22 TRIM TO THE TRADE 43 FAX

49

50 PRODUCT CATALOGUE #109 QUALITY PLUMBING SPECIALTIES TRIM TO THE TRADE CORPORATE WAY THOUSAND PALMS, CA PH FAX ; VISIT OUR ORDERS & INQUIRIES CAN BE ED TO: