FAX: HOSE COUPLINGS, FITTINGS, CLAMPS AND ACCESSORIES

Size: px

Start display at page:

Download "FAX: HOSE COUPLINGS, FITTINGS, CLAMPS AND ACCESSORIES"

Stella Davis
5 years ago
Views:

1 FAX: Air Fittings and Accessories Air King Universal Couplings for Air Service Only (Also available in Brass, Stainless Steel) Hose End (Malleable Iron) (In.) Male NPT End (Malleable Iron) AMH 2 AM 5 AM5 AM6 AM (In.) AMB AMB 2 AM2 AM7 AM2 Female NPT End (Malleable Iron) (In.) AMC AMC 2 AM AM8 AM King 4-Lug Quick-Acting Couplings Hose End (Malleable Iron) Female NPT End (Malleable Iron) Rubber Washer for 4-Lug Fits All s (In.) AM6 2 AM2 2 AM26 (In.) AM8 2 AM2 2 AM28 AWR4 Air King with Ferrules AM-WF and RAM-WF Series Malleable Iron and Stainless Steel Air King with Carbon Steel Ferrules can be crimped or swaged-on. Rated to 0 psi Working Pressure. Blank End (Malleable Iron) AM0 Triple Connection (Malleable Iron) AM0 O.D. Range Mall. Iron Stain. Steel (In.) From To AMWF- RAMWF 62 2 AM6WF- RAM6WF AMWF AMWF- RAMWF Air King Universal Swivels AM-SWIV Series These Universal Swivel fittings interchange with other Air King fittings and include a heavy-duty, free-turning joint that will swivel under pressure to prevent hose kinking. Working Pressure: 0 psi. Malleable Iron. For Air Service Only. (In.) 2 Male NPT AM2SWIV Hose End AM6SWIV Male NPT AM7SWIV Female NPT AM8SWIV 67

2 Washers AWR Series FAX: Air Fittings and Accessories continued The use of an Air King Safety Clip or wire type retainer is necessary to assure Air King Universal Couplings will not become accidentally disconnected. This guarantees the fittings are properly connected as pin will not go through holes in mating flanges until couplings are locked in place. Air King is rated to 0 psi Standard Air King fittings come with AWR4 washers. Air King available to meet MIL Spec. WWC-6D. WARNING: NEVER USE ANY AIR KING COUPLINGS FOR STEAM SERVICE! None of Summers Rubber Company s catalog information is to be interpreted to mean that this type of coupling is suitable for use on steam hose. The Importance of Whip Hose Constant vibration created by air drills, pavement breakers etc. is destructive to air hose couplings, especially the quickacting type. To provide protection connect one end of a to 0 length of air hose to the tool using the heat-treated No. 500 Steel Nipple which withstands vibration for a longer period. Connect the other end of Whip Hose to the air supply with the quick-acting coupling. Whip Hose should remain permanently connected to the tool and should be the same diameter as the supply line hose. Safety Clips AC Series (Package of 25) Material AWR4 Rubber AWR6 Neoprene One size fits all coupling sizes. Temperature range: Rubber -20 F to 60 F. Neoprene -20 F to 90 F. AC One size fits all coupling sizes. Whipchek Safety Cable WB or WA Series Use Whipchek to help prevent accidents or injury resulting from hose or coupling failure. A positive safeguard for air hose connections helps you meet today s safety standards. Whipcheck should be installed in the extended positive position (no slack). Maximium Working Pressure: 200 psi for Air. Features Hose-to-hose or hose-to-rigid outlet. Whipchek is the low cost answer to eliminate injuries caused by broken air hose connections. Highly resistant to rust and corrosion. No tools needed Easy to install and remove. Accepted by Bureau of Mines. Bureau of Reclamation. U.S. Army Corps. of Engineering. OSHA. Cable Length (In.) (In.) 20 WB 8 WA2 Safety Blow Gun D Series Basic safety blow gun for general purpose use. Tip pressure will not exceed 0 psi, yet gives a good blast of air for cleaning. It complies with the requirements of OSHA lb and when used on air lines of 50 psi or less. Safety glasses or shield must be worn when using any blow gun. In-Line Lubricators PL Series Designed to protect portable or stationary air tools by efficiently oiling the tool mechanisms. Each time an air tool is operated, a fine mist of oil is injected into it along with the air from the compressor. Installation is recommended within 25 feet of the tool to be lubricated. Transparent sight disc allows visual inspection of oil level. Oil flow regulated by screwdriver screw adjustment. Max. W.P. (In.) (psi) 2 00 PL00L 200 PL400L 00 PL400L 250 PL500L female NPT inlet Blow Gun Rubber Tipped Blow Gun D Series Provides leakproof seal between gun and fluid line or other opening. Also excellent for cleaning molds or delicate surfaces where a metal tip might scratch or otherwise harm critical areas. CAUTION: This blow gun does not have a safety by-pass to prevent buildup of tip pressure in the event of tip blockage. It may be used for cleaning purposes only if the air supply (inlet pressure) has been reduced to 0 psi or less. TYPE OF OIL TO USE Use any petroleum-base, non-detergent lightweight oil (SAE 0/50SSU) which will readily break up into a mist. Do not use any synthetic oil or oils containing additives or solvents. 68 female NPT inlet Blow Gun w/rubber Tip

3 FAX: Air Fittings and Accessories continued Ball Swivels D-S Series Hose Male NPT (In.) (In.) D444S D446S Air Tool Swivels D-U Series (In.) D44U D46U 2 D48U Push-On Ball Swivels D-SL Series In-Line Swivels SV Series Rated to 250 psi. Steel. Minimum psi 5. Hose Male NPT (In.) (In.) D444SL D446SL Hose Female NPT (In.) (In.) x 2 SV7 2 x 2 SV20 x SV26 in Manifolds D Series Suggested Applications Supply air operated tools from a single hose. Mount to pipe at workbench or overhead. Permits use of air by more than one mechanic. Different tools in the shop use different styles of couplers. Mount different style couplers on one manifold. Inlet Thread (In.) NPT D404 NPT D406 2 NPT D408 Dixon Steel Hose Mender DM and RDM Series Shank Type Fittings Dixon Brass Hose Mender BM Series (In.) Steel 6 Stainless Steel DMA RDMA DMB RDMB 2 DM RDM 5 DM5 DM6 RDM6 DM RDM DM6 RDM6 DM8 2 DM2 RDM2 2 DMXL2* 2 DM26 RDM26 2 DMXL26* 2 2 DM DM6 RDM6 4 DM46 RDM46 5 DM5 6 DM66 8 DM86 0 DM00 2 DM20 *XL series is extra long. (In.) 6 BM5 4 BM BM25 4 BM5 24 BM45 4 BM65 4 BM85 69

4 FAX: Shank Type Fittings continued King Combination Nipples Hose nipples, made from tubular stock, to fit straight end hose. Threaded end, in all styles, has male NPT thread same size as hose; i.e. 2 nipple has 2 thread and fits 2 I.D. hose. Combination nipples are recommended for low pressure discharge and suction service. The working pressure of combination nipples varies with the size of the nipple, the size and construction of the hose and the type of clamping system used. A coupled length of hose, in any size, should be tested to 2 times the working pressure and held for 5 minutes without leaking or coupling movement. As a general rule, these fittings are not recommended for pressures exceeding 00 psi on hose diameters and over. Not intended for compressed air on sizes and above. Unplated Steel, Plated Steel and 6 Stainless Steel NPT Ends ST, STC and RST Series (In.) Unplated Steel Plated Steel 6 Stain. Steel NPT End NPT End NPT End 2 ST STC RST ST5 STC5 RST5 ST0 STC0 RST0 ST5 STC5 RST5 2 ST20 STC20 RST20 2 ST25 STC25 RST ST0 STC0 RST0 ST5 STC5 RST5 4 ST40 STC40 RST40 5 ST50 STC50 RST50 6 ST60 STC60 RST60 8 ST80 STC80 RST80 0 ST00 STC00 2 ST20 STC20 Unplated steel and plated steel in sizes 2 2 are knurled. Brass NPT Ends BST Series Brass NPT End 2 BST BST5 BST0 BST5 2 BST20 2 BST BST0 BST5 4 BST40 5 BST50 6 BST60 Flanged Steel FST Series Flanged Steel* 2 FST200 2 FST250 FST50 4 FST400 6 FST600 8 FST800 0 FST00 2 FST20 *Part are welded 50# flanges. Tri-Lokt Hose Nipples Type 6 Stainless Steel The successful Tri-Lokt Nipple with the same exclusive features designed for higher pressure hose applications in stainless steel with stainless steel tie strips for superior corrosion resistance. Carbon Plated Steel, NPT, Swaged H Series SS Yokes H006 H02 2 H022 H04 H040 Hose I.D. (In.) H600 2 H60 2 H H60 H640 4 H650 5 H656 6 H658 Nipples complete with tie strips. Type 6 Stainless Steel, NPT, Swaged S Series S600 2 S60 2 S S60 S640 4 S650 Nipples complete with tie strips. Replacement Tri-Lokt Yokes and Tie Strip Kits Tri-Lokt is a registered trademark of Band-It -Idex Inc. SS Tie Strip Kits* H604 2 H64 2 H H64 H644 4 H654 5 H769 6 H774 * set strips and jr. clamps. 70

5 FAX: Shank Type Fittings continued King Combination Nipples continued Unplated Steel, Grooved End STV Series Grooved End STV0 STV5 2 STV20 2 STV STV0 STV5 4 STV40 5 STV50 6 STV60 8 STV80 0 STV00 2 STV20 Plated Steel Long Shank Couplings (NPSM and GHT Thread) Female Hose NPSM with Swivel Nut SLS Series (In.) (In.) 2 2 SLS444 SLS646 SLS848 Hose GHT (In.) (In.) 2 5 SLS47 SLS447 SLS547 SLS647 Jump s, Plated Steel, Hose Shank x Male NPT STC Series Hose Male Shank NPT Part x STC050 x STC005 x STC05 x STC50 x 2 STC520 2 x STC205 2 x 2 STC x 2 STC x 2 2 STC x 2 STC x STC05 x 2 2 STC50 x 4 STC540 4 x STC405 King Steel Short Shank Suction Couplings (NPSM Thread) Female Steel with Brass Swivel Nut WF Series Male Steel WM Series WF25 2 WF50 2 WF WF250 WF00 4 WF400 6 WF600 WM25 2 WM WM WM250 2 WM WM WM600 Male SLS Series Hose NPSM (In.) (In.) 2 2 SLS44 SLS66 SLS88 Super King Long Shank Couplings for Bulk Handling Female with NPSM Thread Brass Nut Plated Steel Shank SD Series Male with NPT Thread RSK and SK Series Hose GHT (In.) (In.) 2 5 SD5 2 SD20 2 SD SD0 SD5 4 SD40 SLS7 SLS47 SLS57 SLS67 6 Stainless Steel 2 RSK26 RSK6 Plated Steel SK6 2 SK2 2 SK SK SK6 4 SK46 7

6 FAX: Foot Valves and Strainers Complete Foot Valve Assembly Painted DFV Series Replacement parts available. Strainer Standard Threaded, Round Hole Type Zinc Plated Steel RHS Series Also available in Stainless Steel. 2 DFVS DFVS DFVS00 2 DFVS DFVS DFVS DFVS DFVS DFVS20 2 RHS RHS RHS00 2 RHS RHS RHS RHS RHS RHS RHS20 Strainer Long Thin Round Hole Type Zinc Plated Steel RSS Series Strainer Black Polyethylene Strainer TSS Series Skimmer Top Round Hole Type Zinc Plated Steel DST Series 2 RSS RSS RSS0 2 RSS5 4 2 RSS40 2 TSS TSS25 2 TSS5 2 DST DST25 2 DST5 The Sanitary End Stem, Bevel Seat Female End, Sanitary Clamps, Sanitary Gaskets and Ferrules are USDA approved and are designed to comply with the new -A standards for hose assemblies. Transition Fitting Stainless Steel C&G Adapter x TC Clamp End RE Series Food Grade Fittings 2 RE50SE 2 2 RE200SE 2 RE00SE Transition Fitting Stainless Steel C&G Coupler x TC Clamp End RE Series 2 RC50SE 2 2 RC200SE 2 RC00SE Sanitary Adapter Sanitary End x Male NPT Adapter 04 Stainless Steel 2MP Series Tube Thread O.D. Part 2MP-G MP-G MP-G MP-G250 2MP-G MP-G400 Sanitary Adapter Sanitary End x Female NPT Adapter 04 Stainless Steel 22MP Series Tube Thread O.D. Part 22MP-G MP-G MP-G MP-G250 22MP-G MP-G400 72

7 FAX: Food Grade Fittings continued Flow Chief Food Grade Fittings Sanitary End x Hose Stem 04 Stainless Steel 4MPHR Series Sanitary Clamp 04 Stainless Steel PFC Series Also available: Double Pin H.D. Clamp Bolted Clamp Sanitary Gaskets PFG and PFG-TF Series Tube Thread O.D. Part 4MPHR-G MPHR-G MPHR-G MPHR-G250 4MPHR-G MPHR-G400 Service Pressure Tube Rating 70 F Part (In.) (psi) No MHHM MHHM MHHM MHHM MHHM MHHM MHHM MHHM800 Buna-N* White 2 PFG PFG2 2 2 PFG40 2 PFG PFG64 Teflon White 2 PFG24TF 2 2 PFG2TF 2 2 PFG40TF 2 PFG48TF 4 2 PFG64TF *FDA approved. Bevel Seat Female IXFS Series Acme Thread Hex Nuts IXAN Series 2 IXFS IXFS2 2 2 IXFS40 2 IXFS IXFS64 2 IXAN IXAN2 2 2 IXAN40 2 IXAN IXAN64 Bevel Seat Gaskets for Bevel Seat Fittings Buna N Black PFG-BS Series Male NPT Stem Internal Expansion IXMS Series CB Fittings Internal Expansion IIXCBF, IXCBM and PFG-CB Series 2 PFG24BS 2 2 PFG2BS 2 2 PFG40BS 2 PFG48BS 4 2 PFG64BS 2 IXMS IXMS2 2 2 IXMS40 2 IXMS IXMS64 Female IXCBF48 Male IXCBM48 Gasket PFG48CB 7

Couplings for Gates Hoses 7 Combination Nipple

Supersedes 1 Long Shank Couplings for Gates Hoses 7 Combination Nipple Description: Cast brass, serrated shank, set has hex male and hex swivel female couplings, with a washer seal. Threads are GHT or