User s Manual Trampoline 8
|
|
- Eleanore Gallagher
- 5 years ago
- Views:
Transcription
1 User s Manual Trampoline 8 Model! WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Maximum user weight 17 lbs.
2 ASSEMBLY IMPORTANT ASSEMBLY INFORMATION Need phillips screw driver and 2 adjustable wrenches (putting the trampoline together). A rubber mallet may make assembly easier, however. Assembly requires two persons. Wear gloves to protect your hands from pinch points during assembly. TRAMPOLINE PLACEMENT 1. Place the trampoline on a level surface before using it. 2. Adequate overhead clearance is essential. A minimum of 24 feet from ground level is best. Provide clearance for wires, tree limbs, and other possible hazards. Lateral (sideways) clearance is also essential. Place the trampoline away from walls, structures, fences, and other play areas. Always have a clear space on all sides of the trampoline. 3. Use the trampoline in a well-lighted area. Electric lights may be required for shady areas. 4. Secure the trampoline against unauthorized and unsupervised use.. Remove any objects from beneath the trampoline. 6. The owner and supervisors of the trampoline are responsible to make all users aware of practices specified in this manual. 1. Make sure that you understand the information in the box at the top of this page. Lay two Top Tubes (1) (A with T -Joint and B with Socket in the inset drawing) on the ground in the positions shown. Make sure the Top Tubes are turned so the small holes (spring holes) are facing the ground. Insert one end of the Top Tube with T -Joint (A) into the socket of the other Top Tube with socket (B). The Top Tubes should now appear as shown in step 2, below. 1 B 1 A 2. The peak of the Leg Brace (2) should point toward the ground. Insert one of the Legs (2) halfway into one of the Top Tubes with T -Joint (1) assembled in step 1. Insert the other Leg halfway into the Socket. Press down on both Legs at the same time and fully insert them into the Sockets. Note: You may need to pull outward on the Legs as you insert them into the Socket and T -Joint if the assembly is not smoothly. Push Here Push Here 2 1 Repeat steps 1 and 2 three additional times to assemble three more leg sections. 1 Socket 11 T -Joint
3 3. Note: This step requires two persons. During this step, you will connect the four assembled leg sections Stand two leg sections and hold them in the positions shown. Insert the small end of the Top Tube into the indicated Top Tube with T -Joint (1) on the other leg section. Repeat this step until all four leg sections are connected. When this step is completed, the frame will be fully assembled and freestanding. 4. Lay the Bed (Mat) (3) on the ground inside the assembled frame. Make sure that the two warning decals (not shown) are on top of the Bed (Mat). (Not Shown.) Small End 1 T -Joint Note: If you purchased the Skywalker Trampoline Combo, the enclosure was pre-installed on the Bed (Mat) (3) at the factory. Inspect the attachments of the enclosure Netting to the trampoline mat (bed). Make certain each of the V-rings on the trampoline mat (bed) is threaded through the corresponding buttonhole in the Netting. Be sure to place the opening in the Netting so it is centered under the arch where the jumpers will climb off of and onto the trampoline. If you did not purchase a Trampoline enclosure, disregard this paragraph. 2 Note: There are 40 V-rings around the edge of the Bed (Mat) (3) and 40 holes around the top of the frame. In Steps 4 and you will attach the Bed (Mat) (3) to the frame, using 40 Springs (4). Caution: It is wise to wear leather gloves while attaching the Springs. Be careful where you place your hands as the Springs and frame joints can pinch. V-rings 12
4 Attach the Springs (4) as follows: Hook one end of a Spring (4) into a V-ring. (See the inset drawing.) Hook a second Spring (4) (not shown) to the free end of the first Spring (4). Use the second Spring to pull the first Spring until it reaches the frame. Push the end of the first Spring into a hole in the frame. Unhook the second Spring. After you have hooked one Spring (4) into one of the V- rings on the Bed (Mat) (3), count exactly 10 V-rings and 10 frame holes in a clockwise direction. Attach a second Spring to the V-ring and frame at this point. Count 10 V- rings and 10 frame holes in a clockwise direction and attach a third Spring. Count 10 V-rings and 10 frame holes in a clockwise direction and attach a fourth Spring.. After attaching the first four Springs (4), count exactly V-rings and frame holes in a clockwise direction. Attach another Spring to the V-ring and frame at this point. Count 10 V-rings and 10 frame holes in a clockwise direction and attach another Spring. Count 10 V- rings and 10 frame holes in a clockwise direction and attach another Spring. You will now have 8 evenly spaced Springs (4) attaching the Bed (Mat) (3) to the trampoline frame. Attach remaining Springs (not shown) evenly between the eight attached Springs in the same manner as before. 3 V-ring 4 Continue to attach the remaining Springs between the previously attached Springs, until all Springs are attached. Safety Note: For the Bed (Mat) (3) to have the even tension necessary for safety in jumping, the Springs (4) must be attached as described. As you attach Springs, carefully count the V-rings and frame holes. If a V-ring or hole is skipped, reattach the Springs in the proper position. 6. Lay the frame Pad () on the frame. Adjust the position of the Frame Pad so that the slits are directly above the Legs (2), as shown. Inset drawing Frame (If you are using the Skywalker Trampoline Enclosure, go to the Skywalker Trampoline Enclosure User s Manual, pages 8-11, for instructions in assembling the Enclosure. The Enclosure must be assembled and secured to the trampoline frame before proceeding further with trampoline assembly.) 2 Slit 13
5 Safety Note: Do not use the trampoline without the Frame Pad. The Frame Pad is designed to reduce the possibility of injuries due to jumpers coming in contact with the trampoline frame. If you do not have a Frame Pad, contact your dealer to obtain one. Properly install the Frame Pad before using the trampoline. Sleeve Frame 7. Look under the trampoline pad and locate the straps and sleeves attached to the underside of the Frame Pad. Position each outer strap so that one strap is on each side of the frame as shown. Position each sleeve above a spring, disconnect the spring, slide the spring through the sleeve, and reattach to frame as shown. Straps Longer Strap Repeat this with the remaining sleeves (not shown). Refer to the inset drawing. Hold one of the straps. Wrap the longer strap under the frame and then thread the strap through the buckle on the shorter strap as shown. Pull the end of the longer strap to tighten straps. Do not overtighten the straps. Leave 1/4 inch gap. Repeat this step with the remaining straps (not shown). Frame Buckle 8. Using the included plastic tie, attach the Safety Placard (6) to the frame near the point where jumpers will climb onto and off the trampoline.. Attach Accessories Bag (7) to the frame in the same manner as you attached the frame pad. For increased safety, position the Accessories Bag(7) at least 4 feet away from the Enclosure opening 6 The trampoline is now fully assembled. Make sure that all parts are securely attached. Familiarize yourself and all users of the trampoline with the safety precautions, use and instructional materials, and care and maintenance instructions in this manual before using the trampoline. 7 DISASSEMBLY (TAKING APART) To disassemble (take apart) the trampoline, follow assembly steps 1 through 8 in reverse order. Do not attempt to disassemble any frame parts before the springs and the mat have been removed. Use gloves to protect your hands from pinch points while taking the trampoline apart. 14
6 EXPLODED DRAWING AND PARTS LIST Key No. Qty. Description 1 8 Top Tube (Awith T -Joint and B with Socket) 2 4 Leg Brace 3 1 Stitched Bed with 40 V-rings 4 40 Springs 1 Frame Pad 6 1 User s Manual and Safety Placard 7 1 Accessories Bag * 1 Set of ASTM Frame Labels * These parts are not illustrated. Specifications are subject to change without notice ORDERING REPLACEMENT PARTS To order replacement parts, visit our web site at or call our toll-free Customer Care Hot Line at Jump (867), Monday through Friday, 8 a.m. until p.m. Mountain Time (excluding holidays). To help us assist you, please provide the following information when calling: the MODEL of the trampoline (see the front cover of this manual) the KEY NUMBER and DESCRIPTION of the part (see the PART LIST above) the quantity needed the desired method of shipping 16
7 User s Manual 8 Enclosure Model! WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Maximum user weight 17 lbs.
8 ASSEMBLY ASSEMBLY (PUTTING THE ENCLOSURE TOGETHER) IMPORTANT ASSEMBLY INFORMATION Need phillips screw driver and 2 adjustable wrenches (not included). Assembly requires two adults. Keep children away from the trampoline enclosure until it is completely put together. Use gloves to protect your hands from pinch points while putting the enclosure together. Make sure that the trampoline is properly put together, with the frame pad correctly laid out, before you put together the trampoline enclosure. The assembly steps refer to parts by their descriptions and key numbers (see the PARTS LIST on page 13 and make sure that all listed parts are included. If a part is missing, refer to ORDERING REPLACEMENT PARTS at the bottom of page 13.) TRAMPOLINE PLACEMENT 1. Place the trampoline and enclosure on a level surface before you use it. 2. Adequate overhead clearance is essential. A minimum of 24 feet (7.3 meters) from the ground is recommended. Provide clearance for wires, tree limbs, and other possible hazards. Lateral (sideways) clearance is also essential. Place the trampoline and enclosure away from walls, structures, fences, and other play areas. Maintain a clear space on all sides of the trampoline and enclosure. 3. Use the trampoline and enclosure in a well-lighted area. Artificial (electrical) lighting may be required for shady areas. 4. Secure the trampoline and enclosure against unauthorized and unsupervised use.. Remove any objects from under the trampoline and enclosure. 6. This trampoline enclosure is only to be used as an enclosure for a round trampoline. 1. Make sure that you understand the information in the box at the top of this page. 2. Lay two Straight Tubes (6), two L-tubes (7), and a Curved Tube (8) on the ground so they form an arch. Make sure that the Straight Tubes are oriented so the small holes are in the positions shown. The frame should be completely assembled with the screws. 6 Small Hole Insert the two L-tubes (7) into the two Straight Tubes (6). Next, insert the two L-tubes into the Curved Tube (8). Tighten four Self-tapping Screws () into the small holes in the Straight Tubes (6) and the Curved Tube (8). Note: The Small holes may be on the opposite side of the Curved Tube Then carefully slide the foam sleeves () onto the frame. Note: The ends of the Straight Tubes should not be covered. Small Hole Assemble (put together) the remaining Straight Tubes, L-Tubes, Curved Tubes, and Foam Sleeves in the same way. 8
9 3. Note: In Step 3 you will secure the Enclosure arches to the frame of the trampoline. Lift one of the arches assembled in Step 2 and insert the two Straight Tubes (6) into the tops of the two trampoline frame Square Sockets (4) as shown. Insert a bolt (2) through the matching holes in the left side Straight Tube (6) and Square Socket (4). Screw a lock nut (3) onto the bolt inserted through the Straight Tube (6) and Square Socket (4). Firmly tighten the lock nut onto the bolt (3). Repeat this procedure to bolt the right side of the arch to the trampoline. The arch of the enclosure should now be securely bolted to the trampoline frame. If the enclosure arch does not appear to be tightly secured to the trampoline frame you will need to further tighten the lock nuts. Attach the other arch to the trampoline frame in the same manner (not shown). Arch 4 4 Leg Leg
10 4. Locate one of the D-rings attached to the upper edge of the Netting. Lift the D-ring and hold it close to an L-tube (7) as shown in Inset Drawing A. Insert one of the Straps (11) through the D-ring on the Netting (10). (See Inset Drawing A). Next, thread the end of the Strap under the Foam Sleeve () on the L-tube (7) and up through the two D-rings on the opposite end of the Strap (11). (See Inset Drawing B.) Then thread the end of the Strap (11) back down through the lower D-ring on the Strap. (See Inset Drawing C.) Pull the loose end of the Strap to remove any slack but do not fully tighten the Strap (11) at this time. Attach the Netting (10) to the other three L-tubes (7) with the other six Straps (11) in the same manner.. Tighten the seven Straps (11) attaching the Netting (10) to the L-tubes (7). (See Step 4.) Tie the free end of each Strap (11) around the rest of the Strap (11) to prevent the Strap from becoming loose. 6. Tighten the Straps (11) (not shown) on the underside of the frame pad. See Trampoline manual page Now insert the end cap (13) into the bottom of the T- Bracket. Your trampoline enclosure is now fully assembled (put together). Make sure that all parts are securely attached. Familiarize yourself and all users of the trampoline and enclosure with the safety precautions, use and instructional materials, and care and maintenance instructions in this manual before using the trampoline and enclosure Inset Drawing A B C 11 Insert plastic cap into end of T-Bracket 10
11 DISASSEMBLY (TAKING THE ENCLOSURE APART) To disassemble the trampoline enclosure (take it apart), follow assembly steps 1 through 7 in reverse order. 11
12 CARE AND MAINTENANCE TRAMPOLINE ENCLOSURE CARE AND MAINTENANCE To avoid damage to the trampoline and enclosure, do not allow pets or animals inside the enclosure. Appropriate shoes should be worn inside the enclosure to reduce wear to the trampoline mat (bed). Follow the trampoline manufacturer s recommendations. Continued exposure over a long period of time to the sun, especially to ultraviolet rays, will shorten the life of the enclosure fabric. For longer fabric life, store the enclosure when it is not being used. A dry enclosure, properly stored, will provide the longest life of the fabric, sewing, and hardware. Remove the enclosure from the trampoline during harsh weather conditions or during long periods of non-use. Inspect the trampoline enclosure before each use, and replace any worn, defective, or missing parts. The following conditions could represent potential hazards and increase the possibility of getting hurt: missing, improperly positioned, or insecurely attached netting, enclosure tubes, or foam sleeves punctures, frays, tears, or holes worn in the netting or foam sleeves deterioration in the stitching or fabric of the netting bent or broken enclosure tubes sagging netting sharp protrusions on enclosure tubes If any of these conditions exist, the trampoline enclosure should be disassembled (taken apart) or otherwise protected from being used until the condition is fixed. SPECIAL CONSIDERATIONS High Wind It is possible for the trampoline and enclosure to be blown about by high winds. If you expect high winds, move the trampoline and enclosure to a sheltered location. Disassemble (take down) the enclosure netting. Tie the trampoline frame down to the ground using ropes and stakes (not included). At least three ropes and three stakes should be used. The tops of the stakes should be at ground level so that they will not create a tripping hazard. In addition, the tops of the stakes should be covered, if necessary, so that users will not be hurt by falling onto the stakes. Make sure to attach the ropes to the top of the trampoline frame: do not simply secure the legs or the bases to the ground as they can separate from the frame sockets. Moving the Trampoline and Enclosure If the trampoline and enclosure are to be moved a long distance, they should first be taken apart. See DISASSEM- BLY ON PAGE 11. In addition, refer to the trampoline manufacturer s user s manual. 12
13 EXPLODED DRAWING AND PARTS LIST Key Key No. Qty. Description No. Qty. Description 2 4 Bolt 8 2 Curved Tube 3 4 Lock nut 10 Foam Sleeve 8 Self-tapping Screw 10 1 Netting with attached Hardware 6 4 Straight Tube 11 7 Strap with D-rings 7 4 L-tube 12 1 User s Manual and Safety Placard 13 4 End Cap Specifications are subject to change without notice ORDERING REPLACEMENT PARTS To order replacement parts, visit our web site at or call our toll-free Customer Care Hot Line at Jump (867), Monday through Friday, 8 a.m. until p.m. Mountain Time (excluding holidays). To help us assist you, please provide the following information when calling: the MODEL of the trampoline (see the front cover of this manual) the KEY NUMBER and DESCRIPTION of the part (see the PARTS LIST above) the quantity needed the desired method of shipping. 13
User s Manual SWTC8001. Model WARNING
User s Manual 10 round Enclosure Model SWTC8001! WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Maximum user weight 175
More informationWARNING: Read these materials prior to assembling and using this trampoline and enclosure
All Weather Cover Assembly, Installation, Care, Maintenance & Use Instructions VERSION 1.2 WARNING: Read these materials prior to assembling and using this trampoline and enclosure * O92 Model Shown Do
More informationUSER S MANUAL LT EN
TRAMPOLINE ENCLOSURE FOR 13FT TRAMPOLINE WITH 4 LEGS Assembly, Installation, Care Maintenance, and Use Instructions USER S MANUAL LT-6005-156+EN WARNING THE TRAMPOLINE ENCLOSURE IS ONLY TO BE USED AS AN
More information1. Trained Spo er supervision is recommended. 2. Must place the trampoline on lawn, bark wood chip, sand or cushioning materials. 3.
2 CONTENTS IMPORTANT PRECAUTIONS.......................... 4 WARNING LABEL PLACEMENT... 6 BEFORE YOU BEGIN... 7 TRAMPOLINE/ENCLOSURE SAFETY INFORMATION... 7 USE AND INSTRUCTIONAL MATERIAL... 11 ASSEMBLY...
More informationUser s Manual. 16 Oval Trampoline. Model SWTC1600 WARNING
User s Manual Oval Trampoline Model SWTC00! WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Maximum user weight 00 lbs.!
More informationUser s Manual. Model WARNING IMPORTANT SWTC1500
User s Manual Model SWTC1500 WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Maximum user weight 200 lbs IMPORTANT Trampoline
More information55 INCH MY FIRST TRAMPOLINE Assembly, Installation, Care, Maintenance, and Use Instructions USER S MANUAL
TM 55 INCH MY FIRST TRAMPOLINE Assembly, Installation, Care, Maintenance, and Use Instructions USER S MANUAL O NOT ALLOW MORE THAN ONE PERSON ON THE TRAMPOLINE AT A TIME.! WARNING YOU MUST THOROUGHLY REA
More informationInstallation Guide: Round Trampoline
Trampolines & trampoline parts designed to survive in the harsh Oz climate. www.oztrampolines.com.au Installation Guide: Round Trampoline Safety Tips Here at Oz Trampolines we are passionate about your
More informationUser Guide. 12ft (3.66m) ZorbPOD. with 15.5ft (4.72m) wide enclosure. Got a Problem building your trampoline? Call us on and we can help
User Guide 12ft (3.66m) ZorbPOD with 15.5ft (4.72m) wide enclosure Got a Problem building your trampoline? Call us on 0344 800 4060 and we can help Patent no: DE602006006495D1, EP1721640B1 and US7628731
More informationUser s Manual. Model WARNING IMPORTANT STRC915
User s Manual Model STRC91 WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Maximum user weight 20 lbs IMPORTANT Trampoline
More information10x8FT Rectangular Trampoline and Enclosure Assembly, Installation, Care, Maintenance and Use Instructions
10x8FT Rectangular Trampoline and Enclosure Assembly, Installation, Care, Maintenance and Use Instructions Assembly Size: L 30 x W 244 x H 278cm DO NOT attempt somersaults or flips. Paralysis or death
More informationLM601 Landmark Permanent Blind
LM601 Landmark Permanent Blind Get parts online at www.huntriversedge.com P/N: 26742 REV1: 01/13/17 2017 RETI All Rights Reserved INTRODUCTION Landmark Permanent Blinds are engineered with you the hunter
More informationINSTANT GARAGE MODEL NO: CIG81224 ASSEMBLY INSTRUCTIONS PART NO: ORIGINAL INSTRUCTIONS
INSTANT GARAGE MODEL NO: CIG81224 PART NO: 3503578 ASSEMBLY INSTRUCTIONS ORIGINAL INSTRUCTIONS GC1117 INTRODUCTION Thank you for purchasing this CLARKE Instant Garage. When erected, the CIG81224 garage
More informationUser s Manual. Model SWTC1400 SAM series WARNING
User s Manual 14 round Trampoline Model SWTC1400 SAM series! WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Maximum user
More informationGeneral Purpose Shelter
General Purpose Shelter 0' x 0' x ' ( x x. m) ASSEMBLY MANUAL Model NO.: - Tools required for assembly (not included) TM TABLE OF CONTENTS Important safety instructions... Intended use... Parts list......
More informationMotorized Oasis Awning RTS Motor Cord Replacement Instructions *Helpers Needed*
RETRACTABLE AWNINGS For Technical Support visit us at www.sunsetter.com/ownerscorner or Call Toll Free 800-670-7071 Fax 877-224-4944 Motorized Oasis Awning RTS Motor Cord Replacement Instructions *Helpers
More informationSafety Tips. Welcome. Contents. Care & Maintenance
Safety Tips Welcome At Oz Trampolines, we are passionate about your family s safety when using our trampolines and accessories. We have put together a list of safety tips and advice which will help ensure
More informationWARNING Read these materials prior to assembling and using this Trampoline Enclosure
Alternate Assembly Instructions for Safety Enclosures Models 120, 280, 380, 480, and 480XT Assembly, Installation, Care, Maintenance, and Use Instructions WARNING Read these materials prior to assembling
More information14' x 32' x 12' Round Top Round Style Shelter Assembly Instructions
14' x 32' x 12' Round Top Round Style Shelter Assembly Instructions Description Model # 14' x 32' x 12' RoundTop Garage - Gray 62669 Recommended Tools Please read instructions COMPLETELY before assembly.
More information4812 HEAVY BAG STAND OWNER S MANUAL
48 HEAVY BAG STAND OWNER S MANUAL Note:Warning Labels Everlast Worldwide, 00 Hwy DD, Moberly, MO 65270 Customer Service 800.821.7930 14 C4 48 HEAVY BAG STAND OWNER S MANUAL CONGRATULATIONS! YOU HAVE JUST
More information--- BIG LEAGUE BATTING CAGE ---
--- BIG LEAGUE BATTING CAGE --- BGLC-7500 Call Jaypro Sports Equipment at 1-800-243-0533 during regular business hours for technical support. www.jaypro.com Rev-B Page 1 of 22 IMPORTANT NOTICE: 1. BEFORE
More informationREAD ME FIRST! IMPORTANT WARNING! ENG. Roof top tent
Roof top tent ENG TENT031 220 min READ ME FIRST! Thank you for purchasing a Front Runner Roof Top Tent. Before you start, take a moment to familiarize yourself with these Fitting Instructions and the components
More informationOtter XT 650 Cabin Installation and Set-Up Instructions
Otter XT 650 Cabin Installation and Set-Up Instructions Otter XT 650 Cabin Fits Medium Otter Wild Sled Only Parts Identification and Check List MODEL NUMBERS: Complete Pkg Otter XT 650 Cabin 200891 2 1
More informationAND LOAD CANOPY RACK SPECIFICATIONS
8MAY15 INSTRUCTIONS for the LOCK AND LOAD CANOPY RACK SPECIFICATIONS and SAFE LOADING REQUIREMENTS The Lock and Load ladder carrier for Truck Caps is a rack designed to mount to the top of a pickup truck
More informationUSER MANUAL. Pure Fun Race Car Jumper Trampoline simply good products for real life TM. Model No. 9020CT. Age Recommendation:
Pure Fun Race Car Jumper Trampoline simply good products for real life TM USER MANUAL Model No. 9020CT Age Recommendation: 4-10 Do not allow more than one person on this product at any time. Adult supervision
More informationOtter Pro XT 1200 Cottage Installation and Set-Up Instructions
Otter Pro XT 1200 Cottage Installation and Set-Up Instructions Otter Pro XT 1200 Cottage Fits Small Ultra-Wide Otter Pro and Otter II Sled Only Parts Identification and Check List MODEL NUMBERS: Complete
More informationInstallation and User s Manual 12 x 10 MOTORIZED AWNING
12 x 10 MOTORIZED AWNING Installation and User s Manual 12 x 10 MOTORIZED AWNING 088-1763-0 Stop Please read and understand this manual before any assembly or use of this product. Before beginning assembly
More informationAssembly instructions for Eurotramp trampolines Series: Ultimate, Grand Master Exclusiv, Grand Master, Master
Assembly instructions for Eurotramp trampolines Series: Ultimate, Grand Master Exclusiv, Grand Master, Master 1. Assembly instructions 2. Attaching the plastic coated steel cables on the Ultimate frame
More informationPRESCHOOL JUMPER KIDS TRAMPOLINE. Not recommended for children under 3 years of age.
PRESCHOOL JUMPER KIDS TRAMPOLINE PRODUCT MANUAL - VERSION 03.16.02 FOR AGES: 3-7 WEIGHT LIMIT: 75 Lbs 35 Kgs ADULT(S) NEEDED: TOOLS NEEDED: WARNING/ADVERTENCIA CUSTOMER SERVICE Consult a physician before
More informationCarbon Lite Volleyball system ( Either in packages or components ordered separately )
Instruction Manual VB7222 Carbon Lite Volleyball system ( Either in packages or components ordered separately ) Customer Service (800) 247-7668 P A R T S L I S T Item Qty Description Item Qty Description
More information10 X 20 X 8 Dome Canopy
10 X 20 X 8 Dome Canopy Warning Keep all flame and heat sources away from this tent fabric. Refer to labels for flamability specification. It is not fire proof. The tent fabric will burn if left in continuous
More informationAlien Flier Zip Line Products Installation/Owner s Manual
Alien Flier Zip Line Products Installation/Owner s Manual 1 Table of Contents SAFETY PLEASE READ CAREFULLY... 4 Constructing your Zip Line Xtreme Models... 6 Installing your Alien Flier Trolley on an Existing
More informationManual Awning. Assembly Instructions. Product No Toll-free:
Manual Awning Product No. 088-30- Instructions Toll-free: -877-483-679 IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. 3 Table
More information/ Tool and Equipment Safety Tether System (T.E.S.T.S)
20 INSTRUCTIONS FOR USE AND PRODUCT GUIDE 799953 / 799955 Tool and Equipment Safety Tether System (T.E.S.T.S) Part # T353012 Rev 2 Reliance Industries LLC 2802 East X Street Deer Park, Texas 77536 281-930-800
More informationOtter Pro X-Over Lodge Installation and Set-Up Instructions
Otter Pro X-Over Lodge Installation and Set-Up Instructions Otter Pro X-Over Lodge Fits Magnum Otter II & Pro Sled Only Parts Identification and Check List MODEL NUMBERS: Complete Pkg Pro X-Over Lodge
More informationOPERATOR INSTRUCTION MANUAL INCLUDING REPAIR PARTS FOR MODULAR GENERAL PURPOSE TENT SYSTEM (MGPTS) TYPE I
OPERATOR INSTRUCTION MANUAL INCLUDING REPAIR PARTS FOR MODULAR GENERAL PURPOSE TENT SYSTEM (MGPTS) TYPE I Johnson Outdoors Gear, Inc. Eureka! branded tent products 625 Conklin Road Binghamton, NY 13903
More informationOtter Pro XT Cabin Installation and Set-Up Instructions
Otter Pro XT Cabin Installation and Set-Up Instructions Otter Pro XT Cabin Fits Medium Otter Pro and Otter II Sled Only Parts Identification and Check List MODEL NUMBERS: Complete Pkg Pro XT Thermal Cabin
More informationOtter XT Cabin Installation and Set-Up Instructions
Otter XT Cabin Installation and Set-Up Instructions Otter XT Cabin Fits Medium Otter Wild Sled Only Parts Identification and Check List MODEL NUMBERS: Complete Pkg Otter XT Cabin 200962 2 1 PARTS LIST
More informationNEWMAR SERVICE SCHOOL
NEWMAR SERVICE SCHOOL TRAINING INFORMATION GUIDELINE FOR FEBRUARY 2013 OUR PRODUCTS: NOVA DUAL PITCH AWNING G-2000/ G-1500 2 P a g e G-2085 G-5000 3 P a g e G-LINKS 4 P a g e NOVA/ G-2000/ G-1500 BASIC
More informationBR B Bike Rack Instructions
IMPORTANT NOTE: It is common that vehicles with lids and hatches have a single rear wiper. It is important that you make yourself aware that the wiper cannot be used while the rack is attached to the vehicle.
More informationOWNER S MANUAL 10x10 SUN SHELTER WITH NETTING
OWNER S MANUAL 10x10 SUN SHELTER WITH NETTING L-GZ512PST-C 299-4560-2 IMPORTANT: Please read and follow all safety statements, warnings, assembly instructions, use & care directions before attempting to
More informationDO NOT USE WITH CROSSBAR SPREAD LESS THAN 24.
TM Please read all instructions carefully before assembly, installation and/or use of this product. DO NOT USE WITH CROSSBAR SPREAD LESS THAN 24. WARNING: Do not exceed the weight limit of your vehicle
More informationFLEX KEY ASSEMBLY. ..._ o RAFTER ARM TUBE MAIN ARM TUBE CAP NUT CLAW HINGE
ZIP DEE Inc. 96 Crossen Ave. Elk Grove Village, IL 60007(847)437-0980 (800)338-2378 HEAD CASTING AWNING RAIL FLEX KEY ASSEMBLY..._ o GM1 Installation Instruction GMC Motorhome RAFTER ARM TUBE MAIN ARM
More informationINSTALLATION INSTRUCTIONS AND OWNER'S MANUAL AWNINGS. For trailers & motor homes with straight sides TOOLS REQUIRED
AWNINGS INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL For trailers & motor homes with straight sides TOOLS REQUIRED 1/4" electric drill Ratchet handle kit 3/8" & 7/16" socket No. 1 and No. 2 screwdriver
More informationSolar Power Shade INSTRUCTION MANUAL
INSTRUCTION MANUAL 20 June 2006, Revision Initial Release 26 September 2006, version 2 Powerfilm, Inc. 2337 230th Street Ames, IA 50014 (515) 292-7606 Web Site: www.powerfilmsolar.com Table of Contents
More informationBERYL Service Guide. Travel Adjust OTT Change
BERYL Service Guide Travel Adjust OTT Change SERVICE OVERVIEW This manual will guide you step by step performing a travel adjust and OTT setting change to your Beryl suspension fork. Please follow each
More informationFID WEIGHT BENCH. The contents of this package are not suitable for children under 3 years old. Contains small parts which may cause choking.
FID WEIGHT BENCH PRODUCT MANUAL - VERSION 08.17.06 FOR AGES: 13+ WEIGHT LIMIT: 400 Lbs 181 Kgs ADULT(S) NEEDED: TOOLS NEEDED: WARNING/ADVERTENCIA CUSTOMER SERVICE Do not allow more than one person on the
More informationCore Systems Installation Instructions
185-3017 185-3018 185-3517 607-0149 WLH 09/17/18 TABLE OF CONTENTS ***Assembly*** Roller Tube Assembly Roller Tube Assembly... Standard Application Attaching Tarp to Roller Tube - Standard... Installing
More information300 ft. 5/8 Hose wagon
300 ft. 5/8 Hose wagon Model 95956 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. (Garden hose is not included).
More informationBowDown. MiniMuM Crossbar spread 24 (61CM) Steel Hook (2X) Buckle Strap (2X) Plastic Tube (2X) Plain Strap (2X) SHORT BLACK T-BOLT (2x) BOWDOWN (2x)
BowDown MiniMuM Crossbar spread 24 (61CM) Heavy Duty strap (2x) SHORT BLACK T-BOLT (2x) BOWDOWN (2x) Bow Stern Tie Down Buckle Strap (2X) Plastic Tube (2X) Plain Strap (2X) Steel Hook (2X) IMPORTANT WARNING
More informationINSTRUCTION SHEET DETHATCHER KIT. STS-422LX LPSTS-42JD Assembly Installation Operation Repair Parts L-1660-D. Visit us on the web!
INSTRUCTION SHEET DETHATCHER KIT MODEL: DK-422LX FOR USE WITH SWEEPER MODEL: STS-422LX LPSTS-42JD Assembly Installation Operation Repair Parts For use with Riders and Lawn/Garden Tractors For the latest
More informationROCKING HAMMOCK GD-600. Model GD-600. Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product ROCKING HAMMOCK Table of Contents Safety Notice GD-600 Hardware Pack Assembly Instruction Parts List Warranty Ordering Parts Model
More informationUrea/Adblue Hose Reel
www.scintex.com.au sales@scintex.com.au Model: SHR3408 Urea/Adblue Hose Reel Product Manual Specifications Spring driven drum: for automatic rewind. Locking ratchet: to maintain the desired length of hose
More informationIMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2213 / C2220
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2213 / C2220 Minor movement (or settling) can occur in some incidental harsh driving conditions (On or off road). A rubber bed mat is not a requirement
More informationBigStack. Minimum Crossbar spread 24 For factory racks: Check fitlist notes, or Yakima.com for your vehicle s crossbar spread.
BigStack Minimum Crossbar spread 24 For factory racks: Check fitlist notes, or Yakima.com for your vehicle s crossbar spread. HEAVY Duty strap (2x) PAD (4x) ADJUSTMENT KNOB (2x) T-BOLT (2x) BAIL (2x) BigStack
More informationRAFTER VI. Installation and Operation CAREFREE WITH AUTOMATIC AWNING SUPPORT. RV Accessory PRODUCT OVERVIEW
CAREFREE RAFTER VI RV Accessory WITH AUTOMATIC AWNING SUPPORT Installation and Operation PRODUCT OVERVIEW The gives the awning user the ability to easily tighten the center fabric when the awning is extended.
More informationSolera Classic Awning
Solera Classic Awning OWNER'S MANUAL Page 1 Table of Contents System and Safety Information 2 Operation 3 Extending the Awning 3 Optional Car Port Position 3 Retracting the Awning 3 Fabric Replacement
More informationIMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS. Part # A7006
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS Part # A7006 Parts List Wobble Stopper Body Wobble Stopper Shaft Camper Bracket Lower Bracket Assembly Upper Bracket Upper Bracket Clamp 3/8 SAE Flat
More informationProduct Model JKTR14T2, JKTR12T2 14', 12' Diameter Trampoline Tent User's Manual
Product Model JKTR14T2, JKTR12T2 14', 12' Diameter Trampoline Tent User's Manual SAFETY, USE, PLACEMENT, ASSEMBLY, CARE, AND MAINTENANCE MATERIALS ENCLOSED. READ THIS MANUAL AND ALL MATERIALS FURNISHED
More informationVanagon Ladder Kit Assembly & Installation Instructions
Rocky Mountain Westy Vanagon Ladder Kit Assembly & Installation Instructions Introduction Thank you for purchasing the Rocky Mountain Westy Vanagon Ladder Kit. We pride ourselves in the products we develop
More informationASSEMBLY GUIDE. Customer Service: INCH² 2-BURNER & 864 INCH² 2-BURNER
ASSEMBLY GUIDE 688 INCH² 2-BURNER & 864 INCH² 2-BURNER DANGER If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flames. 3. Open lid. 4. If odor continues, keep away from the appliance
More informationCOMBI CRATE MODEL NO: 7000/7001/7002/7003
COMBI CRATE MODEL NO: 7000/7001/7002/7003 Owner s Manual READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF GATE KEEP INSTRUCTIONS FOR FUTURE USE. Carlson Pet Products,Inc 14305 Southcross Drive,Suite 105,
More informationItem #: BTOT Assembly Instructions
Item #: BTOT Assembly Instructions For our most current instructions, to request missing, lost or broken parts, or for any other Customer Service issues, please visit our website at www.walkeredison.com
More informationVEPR Round Drum Disassembly and Assembly
VEPR 12 25 Round Drum Disassembly and Assembly Required Tools ¼ Allen Wrench Flat Head Screwdriver Drum Parts List Drum Body Carousel Center Bolt Dummy Rounds Carousel Lock Spring Clear Drum Cover Step
More informationHARD DOOR UPGRADE KIT
RV Accessories OWNER'S MANUAL HARD DOOR UPGRADE KIT FOR ADD-A-ROOM & BREEZEWAY SCREEN ROOMS THIS MANUAL SUPPLEMENTS THE ADD-A-ROOM INSTRUCTIONS TABLE OF CONTENTS First Time Assembly... 2 Assembling the
More informationπ H-3505 GARAGE CANOPY PARTS SAFETY uline.com TOOLS NEEDED 10' X 20' X 8'
π H-3505 GARAGE CANOPY 10' X 20' X 8' 1-800-295-5510 uline.com TOOLS NEEDED Safety Glasses Wrench or Socket 9/16" or 14mm Tape Measure Phillips Screwdriver Rubber Mallet PARTS Cables x 5 2-way Corner Foot
More information3x3 Pop Up Gazebo with Side Panels
'-,- 3x3 Pop Up Gazebo with Side Panels Assembly Instructions - Please keep for future reference 650/1974 Width - 3m Depth - 3m Height - 270cm ~ Important: Make sure all the guy ropes and ~ pegs are used,
More informationCabinet Mount Assist Lift n Lock Instructions
Cabinet Mount Assist Lift n Lock Instructions PART LIST 2 @ Gas Cylinder 1 @ Lock Bar 2 @ Rubber Sleeve (preset) 4 @ Stopper Pin (2pcs preset) 4 @ Saddle Block 8 @ 19mm Black PVC Cap 5 @ 14mm Black PVC
More informationTWISTLOCK VEHICLE STABILIZER (TVS) SYSTEM INSTRUCTIONS
TWISTLOCK VEHICLE STABILIZER (TVS) SYSTEM 22-797010, 22-797020, 22-796161 INSTRUCTIONS COMPONENTS: 1. TVS-100, PN 22-797010: 47 60 (119 cm 152 cm) stroke TwistLock Vehicle Stabilizer. Component weight,
More informationCOPPER RIVER CABIN TENT
COPPER RIVER CABIN TENT GEAR GUIDE CABELA S SET NUMBER: 58-2735 PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT. VISIT WWW.CABELAS.COM OR CALL FOR ASSISTANCE 1-800-237-4444. SAVE THESE
More informationAdvantage Plus TIM-3600 Series Reel
Read the following precautions and instructions before you begin assembly or using. Failure to comply with these instructions could result in personal injury or property damage. Keep these instructions
More informationInstallation Guide. LPKPDR - Universal LP Conversion Kit for Professional & Designer Ranges/Rangetops. Viking Range, LLC.
Installation Guide Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641 LPKPDR - Universal LP Conversion Kit for Professional
More informationAssembly TOOLS REQUIRED: 17mm and 14mm or equivalent wrenches.
Instructions for 3 Trimmer Rack, 3TR* *Patents Pending Assembly TOOLS REQUIRED: 17mm and mm or equivalent wrenches. 15 26 26 16 15 16 Attach the lower mounting brackets to the Trimmer Rack poles as shown
More informationMINI TRAMPOLINE WITH HANDRAIL. 220 Lbs 100 Kgs MODEL# 9040MTH PRODUCT MANUAL - VERSION
40 MINI TRAMPOLINE WITH HANDRAIL PRODUCT MANUAL - VERSION 03.16.05 FOR AGES: 13+ WEIGHT LIMIT: 220 Lbs 100 Kgs ADULT(S) NEEDED: TOOLS NEEDED: WARNING/ADVERTENCIA CUSTOMER SERVICE Do not allow more than
More informationRETRACTABLE AWNING w/ OPTIONAL HOOD ASSEMBLY INSTRUCTIONS
Contact us @ (800)851-0865 RETRACTABLE AWNING w/ OPTIONAL HOOD ASSEMBLY INSTRUCTIONS Congratulations on your purchase of a new retractable awning. With proper installation this awning will provide years
More informationS E L E C T I O N. Abdominal Crunch. User manual
and S E L E C T I O N T H E S T R E N G T H E V O L U T I O N User manual and and The identification plate of the and manufacturer, affixed along side the seat on the frame of the weight stack, gives the
More informationANY HAMMOCK CARRIES INHERENT RISK AND ACCIDENTS MAY OCCUR. USE WITH CAUTION.
www.trailnest.com Roof Top Hammock Stand Owner s Manual WARNING! USING ANY HAMMOCK CARRIES INHERENT RISK AND ACCIDENTS MAY OCCUR. USE WITH CAUTION. MAX LOAD: 250 LBS Congratulations! Thank you for purchasing
More informationINSTRUCTION MANUAL ALEKO RETRACTABLE AWNING
INSTRUCTION MANUAL for ALEKO RETRACTABLE AWNING www.alekoproducts.com FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY! 1 Important Safety Precautions WARNING NOTE: FOR PERSONAL SAFETY,
More informationImportant! Read all of these instructions before assembling or riding the glider. For questions or help please call Glide Bikes at
Go Glider Manual Congratulations on your purchase of the Go Glider! Your glider is designed for years of nearly carefree use by your child. These instructions include how to set up your glider and maintenance
More informationSolera Classic Awning OEM INSTALLATION MANUAL
Solera Classic Awning OEM INSTALLATION MANUAL TABLE OF CONTENTS System and Safety Information 2 Preparation 3 Resources Required 3 Installation 3 Installing the Awning Rail (If Necessary) 3 Assembling
More informationCAPRI PLUS. Instruction Manual. 28' x 38' Including sidewall and connector instructions.
CAPRI PLUS Instruction Manual 28' x 38' Including sidewall and connector instructions STOP Prior to installing any tent, always make sure you check for overhead and underground obstructions! For safe assembly,
More informationKontrol Kube Advanced Owners Manual
Mobile Containment. Simplified. TM Kontrol Kube Advanced Owners Manual KONTROL KUBE www.kontrolkube.com 800.343755 1 IMPORTANT SAFETY INFORMATION SAVE THESE INSTRUCTIONS. CAREFULLY READ AND FOLLOW THESE
More informationOWNER S MANUAL. ezup.com. 13 x 13 (4.0m x 4.0m) 10 x 10 (3.0m x 3.0m) 16 x 16 (5.0m x 5.0m)
Shown: Aero Dome with optional awning, sidewall and custom graphics OWNER S MANUAL 10 x 10 (3.0m x 3.0m) 13 x 13 (4.0m x 4.0m) 16 x 16 (5.0m x 5.0m) ezup.com THANK YOU THANK YOU FOR PURCHASING YOUR AERO
More information80070 TOP MOUNT CAMPER SHELL and TRANSIT CONNECT RACK TMCS_3:1
ASSEMBLY INSTRUCTIONS for : 80070 TOP MOUNT CAMPER SHELL and TRANSIT CONNECT RACK TMCS_3:1 (916) 638-8703 (800) 343-7486 11261 Trade Center Drive Rancho Cordova, CA 95742 www.kargomaster.com Transit ASSEMBLY
More informationHANDLE AND WHEEL KIT INSTALLATION
HANDLE AND WHEEL KIT INSTALLATION Select EB and EM Series Generators Honda Power Equipment Your generator is equipped with a wheel kit and folding handle kit for easy transport and convenient storage.
More informationRCCK. Pivot Plug 2x. Sharp Screw 2x TAKE TIME - READ AND UNDERSTAND INSTRUCTIONS COMPLETELY!
RCCK Revolution Cargo Conversion Kit Congratulations on your purchase of the BOB Revolution Cargo Conversion Kit (RCCK). It s designed to easily convert your existing BOB Revolution stroller frame into
More informationTable of Contents. Introduction to the AquaTrak AquaTrak Parts List Tank Frame Assembly Pulley System Assembly...
56679 V0309 Table of Contents Introduction to the AquaTrak................................................... 2 AquaTrak Parts List... 3 Tank Frame Assembly... 4 Pulley System Assembly... 6 AquaTrak Maintenance...10
More informationTITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V
TITAN pt. no.: 02 0000 0128 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationDO NOT use Alien Flier Zip Line Products until you have read and fully understand the SAFETY WARNINGS below!
SAFETY WARNING DO NOT use Alien Flier Zip Line Products until you have read and fully understand the SAFETY WARNINGS below! Assumption of Risk Zip line construction and use can be dangerous. Ensure you
More informationRatchet Strap Operation
The TeleCrib Strut system comes with special Rescue 42 red 10,000 Lb. rescue straps. Hook clusters and cinch rings are also provided to increase system versatility. Straps are supplied in 27 lengths. If
More informationquick and easy installation guide
www.directdriveopener.com quick and easy installation guide Back 2 Front. Motor Carriage 2. C-rail. Chain. Limit stops. Slide in part (tensioner) Rail assembly Insert C-rail parts () into the connecting
More informationThanks for shopping with Improvements! 10 Solar Lighted Gazebo Item #531753
Thanks for shopping with Improvements! 10 Solar Lighted Gazebo Item #531753 Parts List: A. Frame Qty: 1 B. Canopy Qty: 1 C. Stake Qty: 8 D. Brace Qty: 4 E. Cap Qty: 1 F. Battery Qty: 2 G. Rope Qty: 4 H.
More informationSunjoy L-GZ717PST-E Mirage Gazebo. Owner s Manual IMPORTANT
Sunjoy L-GZ717PST-E Mirage Gazebo Owner s Manual IMPORTANT Thank you very much for choosing Sunjoy Industries. Please take time to read these instructions thoroughly and follow each step carefully for
More informationStep by Step Set Up Guide
lite Step by Step Set Up Guide 1 lifting lug Secure lifting lugs to a certified lifting sling. Stand and stabilize escape system under work platform. Position module with round lunette ring facing work
More informationSAFETY GUIDELINES FOR DIY TENTS
SAFETY GUIDELINES FOR DIY TENTS Please read carefully and fully before starting assembly of the tent 1. The installer is solely responsible for evaluating the site and proper securing method determined.
More informationAlien Flier Zip Line Products Installation/Owner s Manual
Alien Flier Zip Line Products Installation/Owner s Manual 1 Table of Contents SAFETY PLEASE READ CAREFULLY... 4 Explorer Zip Line EZ Up Cable Kit Installation... 5 Xtreme Zip Line EZ Up Cable Kit Installation...
More information- Limitation of Liability -
The Clam Exp edition & Exp edition FLR M o d e l N o. 8419 Expedition 8396 Expedition FLR S p e c i f i c a t i o n s H e i g h t - 72 inches Footprint - 60x72 inches Hub-to-hub - 70x90 inches W e i g
More information10FT. X 10FT. STRAIGHT WALL GAZEBO COMBO OWNER S MANUAL
10FT. X 10FT. STRAIGHT WALL GAZEBO COMBO OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationSTORAGE SHELTER 7 1/2 x 12
STORAGE SHELTER 7 1/2 x 12 ITEM # G0712 ACTUAL DIMENSIONS: 7 7 WIDE X 12 LONG X 6 SIDE HEIGHT 7 6 CENTER PEAK Powell & Powell Supply Co., Inc. 1730 Five Points Lane Fuquay-Varina, NC 27526 1-800-800-6296
More information4A1-114/114KR & 4A1-2 MANUAL TENSIONERS
M L. C O O N AL TO 4A1-114/114KR & 4A1-2 W W W.T R AD IT IO MANUAL TENSIONERS READ THESE INSTRUCTIONS CAREFULLY. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN SEVERE PERSONAL INJURY. GENERAL SAFETY
More information