Systematic high power. FEIN SUPERCUT AUTOMOTIVE

Transcription

1 AUTOMOTIVE Systematic high power. FEIN SUPERCUT AUTOMOTIVE Now also available as FEIN AFSC 18 with Li-ion battery

2 PREFACE Indispensable for automotive professionals proven in continuous use: the FEIN SUPERCUT AUTOMOTIVE system as a mains- or battery-powered version. No matter whether you re using it as a mains-powered or the new battery-powered version, the FEIN SUPERCUT AUTOMOTIVE is the powerful system for automotive applications. It s fast, strong and durable and can be used for the most diverse tasks in vehicle glazing, automotive workshops or cargo vehicles. And it s all thanks to the tailored tools of the FEIN professional sets, their outstanding quality and FEIN s extensive experience (more than 40 years) in oscillation construction. Optimally satisfies the requirements of the automotive sector: Enormous time and monetary savings Fast and precise with minimum effort Professional sets coordinated exactly to the corresponding tasks Tailored tools for special tasks No time-consuming manual work Maximum operating comfort thanks to patented QuickIN system Versatile thanks to oscillating drive Indispensable basic equipment for automotive workshops 2

3 BENEFITS The new batterypowered FEIN SUPERCUT can be found on page 5 Same performance added mobility: the AFSC 18 version. With the new battery-powered FEIN SUPERCUT AFSC 18, you benefi t from added mobility without compromising on performance or versatile use. That s because the new FEIN AFSC 18 delivers the same high performance in continuous use as the mains-powered tool! It is available in a tailored set, which includes a replacement battery and a powerful charger, and therefore guarantees powerful working even in continuous use. Perfect for professionals: practical sets with FEIN quality. The accessories are perfectly coordinated to applications in automotive workshops, vehicle glazing and cargo vehicles. And they ve been greatly extended once again for the FEIN professional sets! You benefi t from even more possible applications for the same price and therefore even more cost-effi ciency. Each FEIN SUPERCUT AUTOMOTIVE embodies more than 40 years of user proximity and know-how. So it s no surprise that durable FEIN quality tools have long been standard pieces of equipment in most workshops. Battery-powered FEIN professional set for vehicle glazing Page 8 9 The battery-powered professional set for vehicle glazing allows you to cut out vehicle windows with ease and at speed and without the need for a mains supply. FEIN professional set for vehicle glazing Page The cutter blades included in the professional set for vehicle glazing are designed specifi cally for cutting out the windscreens of most cars safely and at speed. FEIN professional set for automotive workshops Page The professional set for automotive workshops allows you to cut out windscreens, rear windows and side windows. It also includes other accessories for sawing and scraping plastic and metal. FEIN professional set for cargo Page With its very special cutter blades, the professional set for cargo is the tailored solution for large windows in lorries, buses, specialist vehicles and railway rolling stock. FEIN accessories for special applications Page The extended range of accessories for the FEIN SUPERCUT AUTOMOTIVE allows you to make light work of special applications. Tasks which normally require a lot of time can be completed to a high level of quality with minimum effort. 3

4 TECHNOLOGY Satisfies the most stringent requirements in terms of power and quality whether used as a battery- or mains-powered tool. The FEIN SUPERCUT AUTOMOTIVE is the unique oscillating power tool on the market and its performance is consistently focused on the needs of tough sawing and cutting work. FEIN has therefore developed an oscillating power tool which ensures outstanding work progress in a multitude of applications in the automotive sector. Now you can make the most of the FEIN SUPERCUT benefi ts with a cordless tool that delivers the same performance. The benefits for you at a glance More than 40 years of experience and know-how in oscillation construction High-quality components with industrial Made in Germany quality Robust and durable overall design Solid metal/precision cast parts Battery and mains-powered tools enable practically the same work progress Time-saving Patented QuickIN clamping system for convenient and fast tool changes without a wrench. Durable Robust metal gear housing for long service life even in tough working conditions. Efficient Outstanding work progress thanks to constant oscillation. Practical Force-fit hexagonal tool holder for optimum torque transfer. 4

5 Consistent maximum work efficiency even with a battery. No matter whether you re working with a battery or mainspowered tool, the AFSC is the most flexible and powerful oscillator with durable professional quality. Lithium-ion technology means the batteries have no memory effects. The 2 batteries supplied, along with state-of-the-art battery and charging technology, also allow for uninterrupted operation even with tough permanent loads. Intelligent Electronic speed control with tacho generator for high speed consistency when loaded. Enduring 18 V Li-ion battery for power that lasts. Ergonomic Powerful Powerful and highly robust FEIN high-power motor for extraordinary performance. Sits perfectly in your hand thanks to ergonomic shape. For virtually fatigue-free working. Technical data Model AFSC 18 Battery voltage V 18 Battery capacity Ah 2.4 Oscillations rpm 11,000-18,500 Amplitude Degrees 3.4 Gear head height mm 80 Weight kg 2.0 Tool holder QuickIN 5

6 TECHNOLOGY FEIN lithium-ion technology for optimum performance and endurance. In conjunction with the motor s high level of effi ciency, FEIN lithium-ion batteries deliver the perfect combination of low weight and high performance. Their extremely long service lives are the result of individual cell monitoring, which protects the batteries from overload, overheating and total discharge, and the particularly effi cient charging procedure. The low internal resistance of the high-quality cells minimises the build-up of heat in the battery. The battery can therefore be housed in a closed and dust-resistant housing, which also extends the service life. Benefits of FEIN lithium-ion technology Long service life Quick charger Less self-discharge Individual cell monitoring protects from overload 50 % lighter than NiCd batteries, yet they deliver the same performance No memory effect batteries can be charged at any time Short charge time Constant power Quick and efficient: the quick charger charges the battery in 25 minutes. For continuous working. Ah Li-Ion NiCd NiMh Powerful from the first cut to the last: the new FEIN lithium-ion technology delivers constant power until the battery is completely flat. t Low heat build-up Integrated working Ah 100 % > 85 % Competitor: charging phase only starts once the cell has cooled down Shortened charge time: heat build-up is reduced thanks to high-quality battery cells with low internal resistance and the battery doesn t have to be cooled at outdoor temperatures of up to 45 C. Convenient querying at the touch of a button: the capacity display indicates the battery s charge status. t Endurance and power For peak and permanent loading: the battery pack contains 10 high-quality Li-ion cells and features a double-row design. The battery cells used are designed for high discharge currents. 6

7 Extra flat transmission head The mains-powered FEIN SUPERCUT is also available without the QuickIN clamping system. Thanks to the fl atter transmission head, you can even work in hard-to-reach places. Powerful Powerful and highly robust FEIN high-power motor for extraordinary performance. Intelligent Electronic speed control with tacho generator for high speed consistency when loaded. Flexible 5 m industrial-quality cable for large working radius. Ergonomic Ergonomic design for safe and fatigue-free working. Technical data Model FSC 1.6 FSC 1.6 Q Power consumption W Power output W Oscillations rpm 11,000-18,500 Amplitude Degrees Cable with plug m 5 5 Gear head height mm Weight kg Tool change 5 mm socket head wrench QuickIN 7

8 THE BATTERY-POWERED PROFESSIONAL SET FOR VEHICLE GLAZING Mobility and flexibility when removing vehicle windows with the battery-powered FEIN professional set for vehicle glazing. When it comes to reliably removing glass from windscreens at speed, the most cost-effective alternative is to use a mobile tool. The FEIN SUPERCUT AUTOMOTIVE delivers precisely the speed and cost-effectiveness that s needed, as it s possible for just one person to remove glass from the window from the outside, usually in a couple of minutes. The benefits for you: Independent use with powerful Li-ion batteries Just one person is needed to cut out bonded windows from the outside Car windscreens are usually removed in under two minutes The long service lives of the original FEIN cutter blades Suited to almost all vehicle types Removing glass from a windscreen ting out windows Encapsulated windscreens and moulded frames, also with aluminium reinforcement, can be cut out with the L-blade in a single step. Recommended speed: level 3 4. Removing glass from under the bonnet The benefi t of removing glass from windscreens from the outside with the L-blade is that it makes an extremely fast cut! The L-blade, form 207, has a 40% higher cutting performance compared with a U-blade when used at the same speed setting. Recommended speed: level 3 4. The reinforced U-blade is used to remove glass from under the bonnet. Recommended speed: level 3 4. Removing glass from the windscreen from the inside If the outer gap between the glass and bodywork is less than 3mm, the window must be cut out from the inside with a straight blade. Recommended speed: max. level 3. Removing glass from a side window/rear window Glass can be removed from encapsulated side and rear windows from the inside using the L-blades, available in three different lengths up to 38 mm. 8

9 Sharpening blades Special accessories Also included in the set: a whetstone to sharpen blades for a permanently fast and optimum cut. Recommended speed: level 1 2. The new range of accessories is not only suited to removing glass, but also to a multitude of other tasks. You can use the mushroom blade to remove with ease e.g. the light and windscreen wiper sensors, which are a common feature in modern vehicles. Recommended speed: level 2 3. All the professional set components at a glance See page 22 for the complete range of accessories for the FEIN professional set for vehicle glazing. 1 battery-powered FEIN SUPERCUT AFSC 18 in plastic tool case 3 L-shaped cutter blade, toothed (form 207) 2 L-shaped cutter blade, toothed (form 208) 1 L-shaped cutter blade, toothed (form 209) 2 U-shaped cutter blades, reinforced version (1 form 157 and 1 form 111) 2 U-shaped cutter blades, reinforced version, toothed (form 212) 1 straight cutter blade, Z-bend with adjustable stop roller (form 143) 1 straight cutter blade, Z-bend, toothed (form 081) 1 protective cover for tool changes 1 whetstone 2 batteries 1 quick charger

10 THE PROFESSIONAL SET FOR VEHICLE GLAZING out windows cleanly and at speed with the FEIN professional set for vehicle glazing. Now with even more accessories! Windscreens have to be replaced if they have rough stonechipping or cracks. Nowadays the FEIN SUPERCUT AUTOMOTIVE makes this a cost-effective task, as it s possible for just one individual to remove glass from the window from the outside, usually in a couple of minutes. The benefits for you: Just one person is needed to cut out bonded windows from the outside Car windscreens are usually removed in under two minutes The long service lives of the original FEIN cutter blades Suited to almost all vehicle types Factory-recommended by respected vehicle manufacturers Removing glass from a windscreen ting out windows Encapsulated windscreens and moulded frames, also with aluminium reinforcement, can be cut out with the L-blade in a single step. Recommended speed: level 3 4. Removing glass from under the bonnet The benefi t of removing glass from windscreens from the outside with the L-blade is that it makes an extremely fast cut! The L-blade, form 207, has a 40% higher cutting performance compared with a U-blade when used at the same speed setting. Recommended speed: level 3 4. Use the reinforced U-blades to remove glass from under the bonnet. Recommended speed: level 3 4. Removing glass from the windscreen from the inside If the outer gap between the glass and bodywork is less than 3mm, the window must be cut out from the inside with a straight blade. Recommended speed: max. level 3. Removing glass from a side window/rear window Glass can be removed from encapsulated side and rear windows from the inside using the L-blades, available in three different lengths up to 38 mm. 10

11 Sharpening blades Special accessories Also included in the set: a whetstone to sharpen blades for a permanently fast and optimum cut. Recommended speed: level 1 2. The new range of accessories is not only suited to removing glass, but also to a multitude of other tasks. You can use the mushroom blade to remove with ease e.g. the light and windscreen wiper sensors, which are a common feature in modern vehicles. Recommended speed: level 2 3. All the professional set components at a glance 1 FEIN SUPERCUT FSC 1.6 Q in plastic tool case 3 L-shaped cutter blade, toothed (form 207) 2 L-shaped cutter blade, toothed (form 208) 1 L-shaped cutter blade, toothed (form 209) U-shaped cutter blades, reinforced version (1 form 157 and 1 form 111) 2 U-shaped cutter blades, reinforced version, toothed (form 212) 1 straight cutter blade, Z-bend with adjustable stop roller (form 143) 1 straight cutter blade, Z-bend, toothed (form 081) 1 protective cover for tool changes 1 whetstone See page 22 for the complete range of accessories for the FEIN professional set for vehicle glazing

12 THE PROFESSIONAL SET FOR AUTOMOTIVE WORKSHOPS The FEIN professional set for automotive workshops a powerful aid when working with glass and bodywork. Now with even more accessories! Remove and fi t windows, cut through plastics, saw metal, sand, remove rust, undertake welding preparation work and much more. Repairing bodywork is one of the most frequent tasks undertaken in automotive workshops. The versatile FEIN professional set for automotive workshops contains everything professionals need. Ideal as a starter or supplementary set for removing glass indispensable when it comes to repairing bodywork. The benefits for you: Factory-recommended by respected vehicle manufacturers Damage to glass and paint is avoided Powerful bodywork saw which doesn t produce sparks Easy to remove underseal or bodywork parts Just one person is needed to cut out bonded windows Universal equipment for windows and bodywork applications Removing glass from under the bonnet Removing glass from a windscreen The L-blade provides a 40% higher cutting performance compared with a U-blade when used at the same speed. Damage to the bodywork is virtually eliminated. Recommended speed: level 3 4. ting out windows Use the U-blades to remove glass from under the bonnet. Recommended speed: level 3 5. Encapsulated windscreens and moulded frames, also with aluminium reinforcement, can be cut out with the L-blade in a single step. Recommended speed: level 3 4. Removing glass from a side window/rear window Removing residual adhesive Remove glass from the side and rear windows with ease and at speed with the cutter blade, form 143, and the adjustable stop roller. Recommended speed: max. level 3. The scraper blade allows you to remove residual adhesive cleanly and at speed. Recommended speed: level

13 Removing carpet or underseal The stopper knife allows you to remove underseal and stoneguard with ease and at speed. Parts needing repair can be easily exposed and e.g. tow couplings screwed directly to the framework. Recommended speed: level 2 4. Sawing with a HSS blade Special accessories The HSS saw blade allows you to cut bodywork sheet metal up to 1mm rapidly and without producing sparks, as well as most plastics and fi breglass. The cutting width is only 0.5mm. Not suited to high-strength bodywork sheet metal. Recommended speed: level 3 5. As an additional application, you can now separate or repair plastic parts from e.g. bumpers with ease, a task to which the FEIN SUPERCUT AUTOMOTIVE is optimally suited. Recommended speed: level 3 4. Special accessories In addition to the HSS and E-CUT bi-metallic saw blades for machining bodywork or installing navigation devices and stereo systems, FEIN supplies a whole host of additional cutter blades. All the professional set components at a glance See page 22 for the complete range of accessories for the FEIN professional set for automotive workshops. 1 FEIN SUPERCUT FSC 1.6 Q in plastic tool case 2 U-shaped cutter blades, short side (form 076) 2 U-shaped cutter blades, short side (1 form 079 and 1 form 101) 2 L-shaped cutter blade, toothed (form 207) 1 L-shaped cutter blade, toothed (form 208) 1 U-shaped cutter blade, reinforced (form 157) 1 straight cutter blade, Z-bend, with adjustable stop roller (form 143) 1 shovel-shaped scraper blade, with scrape protection coating (form 129) 1 HSS saw blade (Ø 80 mm) 1 protective cover for tool changes 1 stopper knife for removing underseal 1 whetstone :

14 THE PROFESSIONAL SET FOR CARGO The FEIN professional set for cargo the specialist for extreme loads. Now with even more accessories! Replacing windows is one of the most common applications undertaken on lorries, buses and trains. But in this instance, the windows are much bigger than in cars. The FEIN professional set for cargo, specially designed for cargo applications, gives you everything you need. It allows you to remove rigidly bonded windows from lorries, buses and rail vehicles with much more ease and at a considerably higher speed. So it s with good reason that the system is recommended by most bus and lorry manufacturers. The benefits for you: Impressive performance for the extreme loads encountered in the cargo sector Damage to glass and paint is avoided The set contains only original FEIN cutter blades for optimum cutting performance and a long service life Low vehicle downtimes during repairs thanks to on-site use V-cut from outside Joints in bus windows have to be removed with a V-cut before the window can be cut out. Its fast cut makes the straight cutter blade, form 073, optimally suited to the task. Recommended speed: level 3 5. ting out large windows Even very large windows can be cut out with ease from the inside with the cutter blade, form 081. Recommended speed: level 3 5. ting from the outside When it comes to hard-toreach bonds, e.g. under sun visors or for permanently fi tted display panels in buses, the reinforced blade, form 217, is ideal. Recommended speed: level 4 5. Removing windows Use the L-blades, form 207 and 209, for windows in buses and lorries with narrow gaps between the glass and frame. They allow you to cut through rigidly assembled strips with ease and at speed. Recommended speed: level 4 5. Supporting traction Ideal for supporting traction: traction cable and fastening parts. Removing residual adhesive The scraper blade allows you to remove residual adhesive cleanly, with ease and at speed even in hard-to-reach places. 14

15 Removing cover panels Separating cuts in side windows Bonded cover strips can be removed cleanly, reliably and at speed with the straight blades, form 081 and 216, enabling the strips to be reused in most cases. Recommended speed: level 3 5. The curved cutter blade, form 072, is excellently suited to making separating cuts in side windows from inside. Recommended speed: level 3 4. Special accessories Special accessories Even special tasks can be taken on with our special accessories. HSS saw blades for cutting out bus cover panels, extra long blades for deep bonds, mushroom-shaped blades for removing insulation windows, E-CUT blades for cut-outs in plastic, and much more. Would you like to remove plastics precisely and at speed or make cut-outs in fi breglass? The toothed cutter blade, form 073, or the HSS saw blades are perfectly suited to these tasks. All the professional set components at a glance See page 22 for the complete range of accessories for the FEIN professional set for cargo. 1 FEIN SUPERCUT FSC 1.6 Q in plastic tool case 2 straight cutter blades, toothed (form 073) 2 straight cutter blades, Z-bend, toothed (form 081) 1 hook-shaped cutter blade, toothed (form 217) 1 curved cutter blade, Z-bend, toothed (form 072) 3 L-shaped cutter blades, toothed (2 form 207), (1 form 209) 1 U-shaped cutter blade, toothed (form 212) 1 shovel-shaped scraper blade, with scrape protection coating (form 105) 1 traction cable with fastening 1 depth stop 1 whetstone 1 protective cover for tool changes :

16 SPECIAL APPLICATIONS Made by specialists for specialists the FEIN accessories. Both the FEIN SUPERCUT AUTOMOTIVE and its tailored accessories embody years of proximity to users and sound knowledge of the sector in their performance, reliability, user-friendliness and durability. They have been and are continuously optimised for all typical applications in vehicle glazing, cars and cargo vehicles. The benefits for you: Applications, such as sawing, for example, which are only possible with the FEIN SUPERCUT Easier working in complex applications Versatile professional set variants and accessories Accessories which are compatible with all FEIN SUPERCUT models Removing glass Sanding Sawing Use the 25.4 and 19 mm 207 and 208 L-blades for narrow gaps (min. 3mm). The short design means you don t have to dismantle the interior coverings on the A-columns. The bi-metal E-CUT saw blades are perfect for machining bodywork for example in hard-toreach places or radii caused by repair or conversion work to cars (e.g. when installing navigation devices). ting Tool changes for precise sanding allow you to tackle minor repair work such as rust, damage caused by stonechipping, or paintwork damage with ease, even in hard-toreach places in the bodywork. The sanding pad set and the adapter for machines with and without QuickIN provide additional benefi ts. The toothed, straight cutter blade, form 081, optimally dismantles bonded plastic parts and assembly parts like trims or bumper guards. The cutter blade, form 073, is perfectly suited to making subsequent cut-outs in plastic bumpers, for example. ting sheet metal The HSS saw blades allow you to cut rapidly through normalstrength bodywork sheet metal up to 1mm, hard plastics and fi breglass. The cutting line is only 0.5mm wide. You also benefi t from spark-free cutting and individual immersion depths into the material. Scraping off underseal The stopper knife allows you to remove underseal and stoneguard with ease and at speed. Parts needing repair can be easily exposed, and tow couplings screwed directly to the framework. Interior carpets, sound-deadening mats and insulation mats can be removed with ease. 16

17 Removing insulation glass Removing glass from VAG windows The mushroom-shaped cutter blade cuts out insulation windows from buses and trains with ease and at speed. It also allows you to remove residue adhesive from the glass with ease. In some VAG models, the rear and side windows are fi tted with moulded frames. FEIN provides you with the solution for removing the windows in the VW Passat variant models up to 2004, from the VW Polo to the 01, Lupo, Seat and VW Golf III, without causing any damage. ting fibreglass material Reworking cut-outs The wide or narrow M-CUT HSS saw blades allow you to make cut-outs in fi breglass and other plastic composites with precision. The carbide-tipped fi le is optimally suited to reworking cut-outs in hard-to-reach places. It makes light work of plastics, composite material and wood. Stage-bonded windows Stage-bonded or U-profi le bonded windows can even be cut out at the edges with the cutter blade, form 177, with an angle cutter of 8mm. Best suited to bus and train windows. See page 22 for the complete range of accessories for special tasks. 17

18

19 SETS AND ACCESSORIES FEIN SUPERCUT AUTOMOTIVE FSC 1.6/1.6Q and AFSC 18 FEIN SUPERCUT FSC 1.6 FEIN SUPERCUT FSC 1.6 Q FEIN SUPERCUT AFSC 18 Set includes: FEIN SUPERCUT FSC 1.6 in plastic tool case; 1 whetstone; 1 wrench Set includes: FEIN SUPERCUT FSC 1.6 Q in plastic tool case; 1 whetstone; 1 protective cover Set includes: FEIN SUPERCUT AFSC 18 in plastic tool case; 2 batteries; 1 quick charger, 1 whetstone; 1 protective cover Technical data Model FSC 1.6 FSC 1.6 Q AFSC 18 Power consumption W Power output W Battery voltage V Battery capacity Ah Oscillations rpm 11,000-18,500 11,000-18,500 11,000-18,500 Amplitude Degrees Cable with plug m Weight kg Gear head height mm Tool change 5 mm socket head wrench QuickIN QuickIN

20 SETS AND ACCESSORIES FEIN professional sets at a glance The battery-powered professional set for vehicle glazing The professional set for vehicle glazing 1 battery-powered FEIN SUPERCUT AFSC 18 in plastic tool case 3 L-shaped cutter blades, toothed (form 207) 2 L-shaped cutter blades, toothed (form 208) 1 L-shaped cutter blade, toothed (form 209) 2 U-shaped cutter blades, reinforced version (1 form 157 and 1 form 111) 2 U-shaped cutter blades, reinforced version, toothed (form 212) 1 straight cutter blade, Z-bend with adjustable stop roller (form 143) 1 straight cutter blade, Z-bend, toothed (form 081) 1 protective cover for tool changes 1 whetstone 2 batteries 1 quick charger FEIN SUPERCUT FSC 1.6 Q in plastic tool case 3 L-shaped cutter blades, toothed (form 207) 2 L-shaped cutter blades, toothed (form 208) 1 L-shaped cutter blade, toothed (form 209) 2 U-shaped cutter blades, reinforced version (1 form 157 and 1 form 111) 2 U-shaped cutter blades, reinforced version, toothed (form 212) 1 straight cutter blade, Z-bend with adjustable stop roller (form 143) 1 straight cutter blade, Z-bend, toothed (form 081) 1 protective cover for tool changes 1 whetstone The professional set for automotive workshops The professional set for cargo FEIN SUPERCUT FSC 1.6 Q in plastic tool case 2 U-shaped cutter blades, short side (form 076) 2 U-shaped cutter blades, short side (1 form 079 and 1 form 101) 2 L-shaped cutter blades, toothed (form 207) 1 L-shaped cutter blade, toothed (form 208) 1 U-shaped cutter blade, reinforced (form 157) 1 straight cutter blade, Z-bend, with adjustable stop roller (form 143) 1 shovel-shaped scraper blade, with scrape protection coating (form 129) 1 HSS saw blade (Ø 80 mm) 1 stopper knife 1 protective cover for tool changes 1 whetstone FEIN SUPERCUT FSC 1.6 Q in plastic tool case 2 straight cutter blades, toothed (form 073) 2 straight cutter blades, Z-bend, toothed (form 081) 1 hook-shaped cutter blade, toothed (form 217) 1 curved cutter blade, Z-bend, toothed (form 072) 3 L-shaped cutter blades, toothed (2 form 207), (1 form 209) 1 U-shaped cutter blade, toothed (form 212) 1 shovel-shaped scraper blade, with scrape protection coating (form 105) 1 traction cable with fastening 1 whetstone 1 protective cover for tool changes

21 Accessory set for vehicle glazing FEIN dust extractors DUSTEX L-shaped cutter blades, toothed (form 207) 2 L-shaped cutter blades, toothed (form 208); 1 L-shaped cutter blade, toothed (form 209); 2 U-shaped cutter blades, reinforced version (1 form 157 and 1 form 111) 2 U-shaped cutter blades, reinforced version, toothed (form 212) 1 straight cutter blade, Z-bend with adjustable stop roller (form 143) 1 straight cutter blade, Z-bend, toothed (form 081) : Accessory set for automotive workshops 2 U-shaped cutter blades, short side (form 076) 2 U-shaped cutter blades, short side (1 form 079 and 1 form 101) 2 L-shaped cutter blade, toothed (form 207) 1 L-shaped cutter blade, toothed (form 208) 1 U-shaped cutter blade, reinforced (form 157) 1 straight cutter blade, Z-bend, with adjustable stop roller (form 143) 1 shovel-shaped scraper blade, with scrape protection coating (form 129) 1 stopper knife 1 HSS saw blade (Ø 80 mm) : Accessory set for cargo 2 straight cutter blades, toothed (form 073) 2 straight cutter blades, Z-bend, toothed (form 081) 1 hook-shaped cutter blade, toothed (form 217) 1 curved cutter blade, Z-bend, toothed (form 072) 3 L-shaped cutter blades, toothed (2x form 207), (1x form 209) 1 U-shaped cutter blade, toothed (form 212) 1 shovel-shaped scraper blade, with scrape protection coating (form 105) 1 traction cable with fastening : Powerful wet and dry extractor for connecting to power tools when working in the workshop and for assembly work. 1 FEIN DUSTEX 25 1 suction hose, 5 m 1 adapter for FEIN power tools universal power tool adapter (for other manufacturers) 2 extension tubes, plastic 1 each of crevice nozzle, upholstery nozzle, floor nozzle 1 filter bag : FEIN DUSTEX 40 1 suction hose, 5 m 1 adapter for FEIN power tools 1 universal power tool adapter (for other manufacturers) 2 extension tubes, metal 1 each of crevice nozzle, upholstery nozzle, liquid nozzle, high-quality floor nozzle for carpets or hard floors 1 filter bag : Technical data Model DUSTEX 25 DUSTEX 40 Power consumption W Air fl ow rate l / min Max. vacuum m / bar Container volume l Max. connected rating W Weight kg 7 9 Cable with plug m 6 6 Suction hose m

22 ACCESSORIES Vehicle glazing accessories ter blade, U-shaped Ideal for removing glass from under the bonnet. Short side, pack of 2. ter blade, L-shaped Toothed, pack of 2.. Length in mm Z-bend, with rigid depth stop, pack of Automotive workshop accessories out fixture For removing rear or side windows without damaging the moulded sealing lip. For VW Golf III and VW Polo as from the 1995 model, Lupo, Passat V Combi, boot lid. Consisting of: 1 guide block and 2 cutter blades (form 197, 113). 25, Length in mm ter blade, straight Pack of 2. Z-bend, with adjustable depth stop, pack of , ter blade, straight Bent, Z-bend, as additional purchase for cut-out fixture , pack. of Long side, pack of 2 Z-bend, pack of 2.. Flat, with adjustable depth stop, pack of 2. Saw blades HSS, with fine teeth for precise cutting. Universal suitability for sheet metal of up to approx. 1 mm, also doubled, and plastics. pack. of Length in mm Z-bend, bent, with rigid depth stop, pack of 2. Ø mm Bent, pack of 2. HSS, stepped, countersunk clamping screw for flush working, pack of 1. Reinforced version, pack of Length in mm 14 /90º /90º ter blade, curved Z-bend, with rigid depth stop, pack of 2. Ø mm Reinforced version, toothed, pack of 2 20 /50º /75º /75º /50º M-CUT saw blade For making cuts, cut-outs and recesses in sheet metal or plastic, pack of Bent, Z-bend, pack of Z-bend, with adjustable depth stop, pack of 2. Width Length mm mm Length in mm , M-CUT saw blade, narrow For making cuts, cut-outs and recesses for switches and special installations in sheet metal, plastic, GRP and CFRP, pack of 2. Width Length mm mm

23 ACCESSORIES Carbide file, narrow For deburring and filing in fibreglass, CFRP, plastics and wood. Stopper knife For removing coverings and coatings, e.g. underseal, adhesive residues etc., pack of 2. Cargo accessories ter blade, straight Toothed, pack of 2. ter blade, U-shaped with elongated traverse, 2-pack. Width No. in pack mm Qty Length in mm E-CUT Universal saw blades With bi-metallic teeth, stepped, precise cut-outs in sheet metal, plastics and all wood types for special installations such as navigation devices, screens, DVD players, amplifiers and speakers. Length 60 mm. Adapter for FEIN SUPERCUT without QuickIN Needed to hold accessories with a round holder for rasping, sanding and polishing Z-bend, pack of 2. Hook-shaped Toothed, pack of 2. Length in mm Width No. in pack mm Qty Z-bend, toothed, pack of 2. Segment blade pack of Width No. in pack mm Qty ting paste Lubricant for working with sheet metal materials. Adapter for FEIN SUPERCUT with QuickIN Needed to hold accessories with a round holder for rasping, sanding and polishing Sanding pad set Pack of 2, non-perforated Angle cutter, pack of Traction cable With handle. Recommended for use when making separating cuts from the outside with the L-shaped or hookshaped cutter blade. Easier working with less effort when cutting out windows from buses and lorries and in problem areas on rail vehicles. 65 / / ter blade, straight Suited to round cut-outs in plastics. Toothed, pack of 2. Sanding sheet set Consisting of: sanding sheets, 10 of each, non-perforated, with hook and loop fastening, grit 60, 80, 120, 180, 240. ter blade, curved Z-bend, pack of Work gloves Vibration-absorbing, certified in accordance with EN 388/420, EN ISO 10819, EEC No. 0200, no. in pack, 1 pair FEIN offers an extensive range of sandpaper. For detailed information, please consult your FEIN specialist dealer. ter blade, L-shaped Toothed, pack of 2. Size 9 L XL XXL Suitable for removal of chassis attachment parts. Z-bend, toothed, pack of 2. ter blade, mushroom-shaped For cutting silicone and soft putty material and for separating insulation glass units, pack of 5. Length in mm 25, Bail handle For reducing vibrations and for better handling of the FEIN SUPERCUT during longer jobs. Length in mm in mm

24 ACCESSORIES Accessories for removing residual adhesivescraper blade Scraper blade Shovel-shaped, with scrape protection coating, pack of 2. ACCESSORIES FOR AFSC 18 Li-ion 18 V, 2.4 Ah battery with charge monitoring display. 1 item General accessories Protective cover For safe tool changes for SUPERCUT with QuickIN when opening and closing the clamping lever With cross cut and scrape protection coating on the face end stop, pack of 2. 1 item Quick charger ALG 30 for Li-ion batteries Whetstone For sharpening blades before use for an optimum cut. Width in mm item DUSTEX accessories Filter bag for DUSTEX With cross cut, pack of 2. Standard version, 5 items Width in mm Scraper blade set Consisting of: 1 of each scraper blade, shovel-shaped, with scrape protection coating (form 129/105). Extra fi ne version, 5 items Filter cartridge for DUSTEX Filter bag for DUSTEX Consisting of: 1 each of scraper blade with cross cut and scrape protectioncoating on the face end stop (form 113/131). Standard version, 5 items Extra fi ne version, 5 items Filter cartridge for DUSTEX The blades are supplied as a pack of 2. European Patent No and Japan Utility Model No and US Patent No and Further information A detailed overview of which cutter blade is best suited to which vehicle type can be found online at: 24

25

26 FEIN the specialist for durable power tools. FEIN is the specialist for professional and extremely reliable power tools and special solutions for metal, interior and automotive applications. As the inventor of the electric hand drill, FEIN has been developing innovative and unbeatably effi cient solutions for everyday use which can also stand up to the toughest continuous use in industry and trade for over 140 years. Make the most of the 3-year FEIN PLUS warranty. We offer the 3-year FEIN PLUS warranty for all your FEIN power tools. All you need to do is register your new FEIN power tool at within 6 weeks of purchase. If you have any further questions or would like to test the FEIN SUPERCUT AUTOMOTIVE your specialist dealer will be happy to help. Germany: C. & E. FEIN GmbH, Hans-Fein-Str. 81, Schwäbisch Gmünd-Bargau Great Britain: FEIN Industrial Power Tools UK Ltd., 4 Badby Park, Heartlands Business Park, Daventry, Northants NN11 8YT, Phone USA: FEIN Power Tools Inc., 1030 Alcon Street, Pittsburgh, PA 15220, Phone , Toll Free: Canada: FEIN Canadian Power Tool Company, 323 Traders Blvd. East, Mississauga, Ontario L4Z 2E5, Phone , Toll Free: FEIN Quebec Ltee, 2810 De Miniac, St. Laurent, Quebec H4S 1K9, Phone , Toll Free: Australia: FEIN Power Tools Pty. Ltd., Unit 7/55 61 Pine Road, Yennora N.S.W. 2161; P.O. Box 328, Fairfi eld N.S.W. 1860, Phone India: FEIN Power Tools India Pvt. Ltd., 69 Arcot Road, Kodambakkam, Chennai , Phone , Fax Regional Office of Asia Pacific: FEIN Power Tools Asia Limited, A1, 11/F, Block A, Mai Hing Industrial Building, Hing Yip Street, Kwun Tong, Kowloon, Hong Kong, Phone , Fax Printed in Germany. Diagrams not binding. Technical details subject to change EN.