Product instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E
|
|
- Darleen Evans
- 6 years ago
- Views:
Transcription
1 Product instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E The Trimfast Ream Cutters are reliable, high performance cutters that will give you the results you need quickly and efficiently.
2 Contents Page 3 - Introduction Page 4 - Safety instructions & Specifications Page 5 - Contents, General maintenance, Spare parts & Ream cutter components Page 6 - Ream cutter components & descriptions Page 7 - Attaching the ream cutter to its stand Page 8 - Operation, Electric power paper trimming specification, Installation of power system & Trouble shooting. Page 9 - Ream cutter operation & Cutting stick Page 10 - Blade resharpening & Blade replacement (RE3943) Page 11 - Blade replacement (Flick action clamping system) Page 12 - Blade replacement (Spindle hand wheel) Page 13 & 14 - Blade replacement (Electric ream cutters) Page 15 - Warranty & Incorrect use 2
3 Introduction Thank you for purchasing the Trimfast Ream Cutter. When you have large quantities of paper to cut, Trimfast offers a range of reliable, high performance ream cutters that will give you the results you need quickly and efficiently. All our systems feature resharpenable blades and either a flick action or spindle guided clamp. A stand is available with all models except the RE3943 and all models feature manual operation except the RE3952E which is an electric system. Please read these instructions carefully before starting to use the system to ensure you get the best results and are competent at operation. Should you experience any problems please contact us and we will be happy to help. Trimfast Ream Cutter 3
4 Safety Instructions Please read these instructions carefully. Note the safe operational requirements, warnings and cautions. Use the product correctly and with care for the purpose for which it was intended. Failure to do so may cause damage or personal injury, and will invalidate the warranty. Please keep instructions safe for future use. Keep this product out of the reach of children. Ensure that no more than one person is working at the same system at the same time. Keep hands away from the blade to avoid injury. Keep loose items eg. jewellery, clothing, neckties etc away from the blade to avoid personal injury or damage to the product. Ensure lever is moved with both hands. After use ensure the knife lever is moved back to the starting position until the knife is locked. Do not disassemble the front safety guard. Do not grasp underneath the knife edge. Follow all instructions when replacing the knife blade. This product is intended for indoor use only. Do not use outdoors. Do not expose product to water or other liquids. Keep guards and covers in place at all times. Ensure you are stood in front of the system when in use. Do not force the system. Maintain system with care. For electric models, ensure the power supply is disconnected when not in use. This cutting system is designed for cutting paper, do not cut wood, plastic etc with the cutter. Specifications Model Length Max Paper Size Cutting Capacity Table Size RE3943** 370mm A4 15mm/150 sheets 265x475x450mm RE mm A3 20mm/200 sheets 1060x640x700mm RE mm A3 60mm/600 sheets 1080x680x740mm RE mm A3 80mm/800 sheets 1310x766x769mm RE3952E o 430mm A3 45mm/450 sheets 1210x630x820mm ** Stand not included, available to order. o Electric model 4
5 Contents After unpacking the Trimfast Ream Cutter, check to make sure that there is no damage. General Maintenance All moving parts need to be lubricated and oiled from time to time. Before lubricating these parts the system should be cleaned from dust, debris and any oil and grease. All moving parts attached with screws need to be checked to ensure these are fastened securely. Some screws may loosen in transit. It is advised that all screws are re-checked and re-tightened after around 200 cuts. Maintaining the system correctly will help avoid faults and damage. Spare Parts For Spare Parts please contact your supplier Ream Cutter Components (Based on RE3946 Ream Cutter - All components are similar but on some models the spindle guided clamping wheel may be replaced with a clamping lever). 5
6 Ream Cutter Components & Descriptions (The below descriptions are based on the majority of the Ream Cutter systems, some models may differ and not include all components). Safety Gadget - This is to protect fingers whilst operating the cutter. Knife Lever - The knife lever enables cutting without effort. A sharp knife is important for the best performance. After each cutting operation the knife lever must be placed back into its top position until the knife lever is locked. Knife Locking Device - This secures the knife in its top, raised position. A cutting operation can only be carried out when the front safety guard is in the down position and the locking device is released. Please note the knife locking device is controlled and connected with the front safety guard and the knife lever. You can open the front safety guard only when the knife lever is in its starting point. Blade - Made of high quality carbon steel, the blade is resharpenable. Blade Carrier - Attached to the system are a number of screws. Only disassemble these for a knife change or when carrying out maintenance on the system. Cutting Stick - Made from strong plastic. It can be used twice on each size. Front Safety Guard - This must be lowered before each cutting operation, the locking device can then be released. The front safety guard can be reopened only when the knife lever is placed in its top, raised position. Spindle Guided Clamping System - For pressing and holding the paper stack which is being cut. Turn the clamp wheel clockwise to clamp the paper stack. Turn the wheel anti-clockwise to release the paper stack. Flick Action Clamping System - For pressing the paper pile which is being cut. Press lever forward to open the clamping system. Press lever backwards to close the clamping system. Cover - Attached to the machine with a number of screws. Only disassemble for a knife change or when carrying out maintenance on the system. Knife Adjustment - The knife can be adjusted slightly by using the adjustment screw, turn clockwise to adjust the knife downwards. Turn the screw anti-clockwise to adjust the knife upwards. Please note the maximum adjustment is 2mm. A knife that is adjusted too deeply does not only damage the cutting stick but the knife itself. Back Gauge Crank - The crank is indirectly connected to the back gauge. Connection is made by a slight push of the crank towards the system. The connection is released when pulling the crank towards the operator. Turn clockwise: The back gauge moves towards the knife. Turn anti-clockwise: The back gauge moves away from the knife. The scale behind the crank is for fine adjustment of the back gauge. Back Gauge - For adjusting to the desired cutting size and for exact positioning of the paper pile to be cut. Side Gauge with scale - In mm/cm and inches. The indicator on the back gauge crank showing the measurement, which adjusts the scale of the side gauge. Fine adjustment is done via the mm scale of the scale ring. Stand - Made from heavy duty steel. Light Switch - This will shine a bright line to indicate where the cut will be made. This will enable accurate cutting. Paper Alignment - Made from steel to align the paper on the left hand side. Rear Safety Guard - Made of acrylic to protect the safety of operation and prevent from dust. Select Switch - Turn to the right to get ready for operation, turn left for blade change. (Electric models) 6
7 Attaching the Ream Cutter to its stand (Based on RE3946 Ream Cutter - All models will fit the stand in the same way. Please ensure that 2 x Size D batteries are placed in the battery holder, this applies to all models.the RE3943 doesn t come with a stand). The grip of the knife lever, spindle guided clamping wheel and the back gauge crank are packed separately with the system. Please start by assembling these. To attach the guillotine to its stand, start by setting up the stand with the 4 threaded pins pointing upwards. Assemble the stand according to the colour labelling on the stand. Place the guillotine system (top part of the system) onto the stand. Secure with the washers and hexagonal nuts with a 13mm wrench. Fit two batteries (size D) into the battery holder. 7
8 Operation Electric Models Only: Pushing the back gauge crank slightly towards the system and turn anti-clockwise in order to insert the paper pile. Turn the back gauge crank clockwise to adjust the measure to what you need. Turn the clamp hand wheel clockwise to clamp the paper pile and close the safety guard. Pushing two enable switches simultaneously and hold it until the cutting is complete. The light will check the position of the paper pile to be cut. The blade will automatically stop when the safety guard is open. The system can be operated only when the safety guard is closed securely. Electric Power Paper Trimming Specification Installation of power system Please follow the below specification when installing the system: Trouble Shooting The knife does not move: please make sure the main motor magnetic contact is activated. No power: Please check the power source and the fuse Overloaded: Please wait until the breaker reset automatically when the indicator light is off, and then reduce the pile of paper. The system cannot work after closing the safety guard: Press the 2 enable switches again and check the safety guard is completely closed. Please note: Do not dispose of electrical appliances as unsorted waste, dispose of this system correctly. 8
9 Ream Cutter Operation (Spindle hand wheel systems): Place the knife lever in its top position. Raise the front safety guard. Push the paper pile along the paper alignment from the front of the system, and position against the back and left hand side gauges. Push the back gauge crank towards the cutter to engage, turn the crank handle clockwise to bring the back gauge towards the knife until the paper measurement is reached. With the help of the fine adjustment ring, accurate measurement can easily be reached. Release the back gauge crank, so that the unintentional movement of the back gauge can be prevented. Turn the spindle hand wheel clockwise to clamp the paper pile tight. Lower the front safety guard, to reach the table. Using both hands, lower the knife lever to cut the paper stack. When the cut is complete place the lever into its top starting position, until this locks. Turn the spindle hand wheel counter clockwise to release the paper pile. Lift the front safety guard, and remove the paper pile from the cutter. (Flick action clamping system): Follow the above step one and two Release the screw of the back gauge and adjust to the accurate measurement for cutting. Be sure to tighten the screw once in its precise position. Switch the lever of the flick action clamping system backwards (near to operator) when the clamping device touches the paper pile, apply pressure to the handle until the paper pile is secured. Close the hand guard firmly onto the table then the safety lock is released. Using both hands, lower the knife lever to cut the paper stack. When the cut is complete place the lever into its top starting position, until this locks. Release the hand lever of the flick action clamping system. Lift the hand guard, and remove the paper pile from the cutter. Cutting Stick If the last sheet of the paper pile does not cut through, even though the knife adjustment has already been adjusted, the cutting stick should be changed or rotated. The cutting stick can be used twice on each side, which means you can rotate each stick 8 times. The cutting stick fits into the system table and can be lifted out using a screw driver. The pins in the base of the systems table hold the cutting sticks, by securing the holes on each end of the stick onto the pins. Please note. When the cutting stick is changed, the knife has to be readjusted. A knife which cuts too deeply damages not only the cutting stick but also the knife too. 9
10 Blade Resharpening Please note: A dull knife does not cut accurately. The cutting of thicker stock paper or cardboard, will blunt the blade easily. When the knife cannot cut the paper pile cleanly even when the cutting stick has been changed and the knife adjustment has been done, then the blade is required to be resharpened. When you need to resharpen the blade, take the blade to be resharpened and then refer to the Blade Replacement section for instructions on how to reload the blade. Precise cuts are only possible with a sharp knife. The knife should be changed as soon as the quality and the accuracy of the cuts are not to the expected standards. If the knife should jam in the paper pile or leave grooves in the paper, the knife must be changed right away. Knife life with basic paper is approximately 600 cutting times, depending on the cutting capacity. This will vary depending on the paper stock being cut. The knife should only be changed by a single person, to avoid injuries. The cutting edge is extremely sharp and must be handled with care. NOTE: Please refer to the following sections of the manual for Blade Replacement Blade Replacement Blade replacement for the RE3943: 1. Raise the knife lever to its lock position and then turn the lever counter clockwise to take it off. Remove the screws on (a) in the corners of the cover. Take off the cover and return the knife lever back. 2. Use a screwdriver to remove the screws on (c) and (d). Next replace them with two knife holders, and tighten. 3. Take out the screws on (b) and (e). Then loosen the knife holders with both hands to remove the blunt blade. 4. Place a new knife into the knife carrier and fix it securely with the knife holders. Fasten the screws on (b) and (e). Take away the knife holders and screws (c) and (d). 5. Turn the knife adjustment (9) to the right until you have a visible ray of light between the knife edges and the cutting stick. Make the knife touch the cutting stick by using the adjusting device. Have a trial cut with one sheet of paper. If the paper does not cut through totally, adjust the knife by altering (9) and (y). Please note. (9) is for minor up/down adjustment. (y) is for horizontal adjustment. 6. Re-attach the hand guard and the cover. 10
11 Blade Replacement For Cutters with a Flick Action Clamping System: 1. For 400 sheets: Put the knife lever to its top position between 120 & 150 degrees and loosen the soft PE handle to remove it. To take off the safety gadget please refer to (13) 2. For 200 sheets: Put the knife lever to its top position about 90 degrees and loosen the knife lever to take it off. 3. Remove the screws on the front safety guard and cover (screws a & b). Remove the blade housing cover and front safety guard. 4. Lower the knife lever to be horizontal. Remove the knife screws (b & d) and replace them with two knife holders from the tool box. Tightly secure. Remove knife screws (c & e). 5. Return the knife lever to its locked starting position. Remove the knife screw 6. Loosen the knife holder by a half turn, and lower the knife from the knife carrier. Remove the worn blade and replace with a new one. 7. Insert the knife holders into the second & fourth threaded holes (b & d) of the knife. Place the knife into the knife carrier and fasten them securely with knife holders. Lower the lever to be horizontal. 8. Screw in knife screws (c & e) remove the knife holders, then screw in the knife screw (b & d) 9. Return the knife lever to its locked starting position. Screw in the knife screw (a). Move the knife carefully down to the cutting stick via the knife lever. Turn the knife adjustment (9) to the right - until you have a visible ray of light between the knife edge and cutting stick. Adjust the knife to touch the cutting stick by adjusting the screws. 10. Ensure the knife is in its locked starting position. Make a trial cut on one piece of paper. If the paper does not cut, then the knife will need adjusting via the screws. Re-attach the blade housing cover and the front safety guard. 11
12 Blade Replacement For Cutters with a Spindle Hand Wheel: 1. Remove the safety gadget (1). Raise the knife lever. Remove the screw (c) on the clamp wheel. Remove all the screws fixed on the cover. Place the knife lever at 75 degrees and remove the knife cover. 2. Lower the knife lever until this is horizontal. 3. Remove the screws (b & d), replace them with the two knife holders from the tool box and tighten them securely. Remove the knife screws (c & e). 4. Return the knife lever to its locked starting position. Remove the knife screw (a). Loosen the knife holders (by only half turn) and lower the blade downwards from the blade carrier and remove the blade carefully. 5. Remove the knife holders and the old blade, replace this with a new blade. Screw the knife holders back into place. Insert the knife holders into the opened second & fourth hole of the blade carrier and fasten. 6. Lower the knife lever until this is horizontal, tighten the knife screws (c & e) remove the knife holders, then fasten the knife screws (b & d). 7. Return the knife lever to its locked starting position. Screw in the knife screw (a). Move the knife carefully down to the cutting stick via the knife lever. Turn the knife adjustment (8) to the right - until you have a visible ray of light between knife edge and cutting stick. Adjust the knife to touch the cutting stick by adjusting the screws. Move the knife lever to its locked raised position. Make a trial cut with one sheet of paper, if the paper does not cut through totally, then the knife needs adjusting using the screws (y & 8). Please note. (8) is for minor up/down adjustment. (y) is for horizontal adjustment. 8. Place the knife lever at 75 degrees and assemble the cover. Tighten all screws on the cover. Assemble the spindle clamp hand wheel and screw (c) to fix tightly. Assemble the safety gadget. 12
13 Blade Replacement For Electric Ream Cutters: 1. Remove the screws at both ends of the cover. 2. Remove the clamp hand wheel and put it aside then remove the cover. 3. Press the power switch on, and turn the select switch to the left. 4. Press 2 enable switches simultaneously, then the cutter will move down to the end. Turn the select switch to the middle, open the safety guard and remove the right screw on the cutter. 5. Close the safety guard, turn the select switch to the right. Press the 2 enable switches together, then the cutter will move upwards. Turn the select switch to the middle and turn off the power switch. Open the safety guard and remove the left screw. 6. Remove the 2 other screws (B) but keep the central one (A) as it is. 7. Screw the 2 cutter holders (in tool box) into B position tightly to avoid the blade falling down then remove the central screw A. 8. Grip and loosen the cutter holders by just a turn, move the cutter downwards and take away the cutter carefully. 9. Turn the 3 (socket headless) adjustable screws by T-wrench anti-clockwise, from cutter support as high as possible (1mm up at least) and turn the blade fine adjustment device on the right hand side clockwise. 13
14 10. Remove the protective pad and hold it securely by the 2 cutter holders then reverse the procedure to replace the new blade. 11. Assemble and turn the clamp hand wheel downwards. The blade and the blade holder should be close together. 12. Fasten the screw A tightly then remove the 2 cutter holders and fasten the 2 B screws tightly. 13. Replace the left screw and close the safety guard. Turn the power switch on and turn the select switch to the left then press the 2 enable switches together. The cutter will lower. Turn the select switch to the middle, open the safety guard and fasten the right screw on the right end of the blade holder. 14. If the blade and cutting stick does not match, adjust the 3 (socket headless) screws until they are 100% matching together. 15. Turn the select switch to the right and press the 2 enable switches together to raise the cutter and check the cutting function with one sheet of paper. If the cutter does not cut accurately, please follow the following steps. 16. Using a 3mm hexagon wrench to adjust the 3 (socket headless) screws on the top of the carrier slightly and turn the fine adjustment device of the cutter upwards/ downwards until the blade is in contact with the cutting stick. Optimal adjustment is done when the last sheet is cut accurately. 17. Place the metal cover onto the cutter carrier then replace the clamp hand wheel and fasten the screws. Finally fasten the screws on the two ends of the metal cover. 14
15 Warranty & Incorrect Use IMPORTANT INFORMATION Your Trimfast Finishing System should reach you in perfect condition, however please retain all of the original packaging once you have unpacked your Finishing System in case you need to return it for repair. If your system arrives damaged or faulty in anyway, this must be reported to your supplier immediately. If the Finishing System is sent back for repair under warranty and is damaged in transit due to faulty packaging your warranty may be void. Your Finishing System is guaranteed for 1 year from date of purchase covering defective parts and general wear and tear; it does not cover any damage to the blades. E&O.E 15
functionality with the necessary maintenance tools stored in a convenient built in tool box, as well as parallel handles for
GuilloMax User Manual The Guillomax has distinct features such as its unique structure and ease of cutting. It combines symmetry with functionality with the necessary maintenance tools stored in a convenient
More informationMAX Series 9514 OPERATOR S MANUAL
MAX Series 9514 OPERATOR S MANUAL Persons under age 18 are not permitted to operate or have accessibility to operate this equipment per U.S. Dept. Of Labor Employment Standards Administration Fact Sheet
More information1000M MANUAL Signature Series Slicer OPERATORS MANUAL
1000M MANUAL Signature Series Slicer OPERATORS MANUAL Persons under age 18 are not permitted to operate or have accessibility to operate this equipment per U.S. Dept. Of Labor Employment Standards Administration
More informationAFC-50 Automatic French Fry Cutter Instruction Manual
AFC-50 Automatic French Fry Cutter Instruction Manual Fry Factory Inc. 67 Watts Ave, Charlottetown, PEI, C1E 2B7, Canada Phone: 902-368-2900 Fax: 902-368-8645 Email: info@fryfactoryinc.com Website: www.fryfactoryinc.com
More informationI N ST R UC T I ON MODELS 1612E, 1712E & 1712RE SLICERS. FORM Rev. B (10-97) 1712RE 701 S. RIDGE AVENUE TROY, OHIO 45374
I N ST R UC 1712E T I ON MODELS 1612E, 1712E & 1712RE SLICERS S ML-104546 ML-104547 ML-104548 1612E 1712E 1712RE 701 S. RIDGE AVENUE TROY, OHIO 45374 FORM 19238 Rev. B (10-97) TABLE OF CONTENTS GENERAL......................................................................
More information1612P MODEL 1612P SLICER MODEL EXECUTIVE OFFICES 701 RIDGE AVENUE TROY, OHIO FORM (4-95)
1612P MODEL 1612P SLICER MODEL 1612P ML-104587 EXECUTIVE OFFICES 701 RIDGE AVENUE TROY, OHIO 45374-0001 FORM 19370 (4-95) Installation, Operation, and Care of MODEL 1612P SLICER SAVE THESE INSTRUCTIONS
More informationTN5000 Titan Manual Rotary Microtome
User Manual TN5000 Titan Manual Rotary Microtome Read Prior to Operation! Always keep this manual near the unit! WP47617 06.02.15 User Manual TN5500: Titan 888.708.5233 Info@TannerScientific.com www.tannerscientific.com
More informationVEPR Round Drum Disassembly and Assembly
VEPR 12 25 Round Drum Disassembly and Assembly Required Tools ¼ Allen Wrench Flat Head Screwdriver Drum Parts List Drum Body Carousel Center Bolt Dummy Rounds Carousel Lock Spring Clear Drum Cover Step
More informationMeat Slicer INSTRUCTION MANUAL CAUTION! ONE YEAR LIMITED WARRANTY
ONE YEAR LIMITED WARRANTY INSTRUCTION MANUAL The original registered owner of this product should contact SKYFOOD EQUIPMENT LLC at 305-868-16 for any warranty problems or service. SKYFOOD EQUIPMENT LLC
More informationSERVICE MANUAL- M126
SERVICE MANUAL- MANUAL CAN OPENER- MODEL # 2 1 Model #2 Can Opener Assembly Procedure The Model #2 can opener will be assembled according to the following procedure. I. Model #2 Handle and Arbor Assembly
More informationJARVIS. Model 70 Airsnip Air Powered Scissors
Air Powered Scissors EQUIPMENT SELECTION... Ordering No. Airsnip Model 70... 4019009 Air Filter/Regulator/Lubricator.. 3022003 Balancer... 1350084 Power--Pak (250 PSI)... 4026016 TABLE OF CONTENTS... Page
More informationALEKO Victoria Series Retractable Awning Instructions for Installation and Operation
www.alekoproducts.com ALEKO Victoria Series Retractable Awning Instructions for Installation and Operation PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE! The owner s manual includes assembly and operating
More informationGLM300 Semi-auto Slicer
Frequency: Before each days use Division: Location: User: Supervisor: Preceda Code: Article Number:
More informationInstallation and User s Manual 12 x 10 MOTORIZED AWNING
12 x 10 MOTORIZED AWNING Installation and User s Manual 12 x 10 MOTORIZED AWNING 088-1763-0 Stop Please read and understand this manual before any assembly or use of this product. Before beginning assembly
More informationM129 SERVICE MANUAL- M129 MODEL #G-2 MANUAL CAN OPENER
SERVICE MANUAL- M129 MODEL #G-2 MANUAL CAN OPENER Model #G-2 Can Opener Assembly Procedure The Model #G-2 can opener will be assembled according to the following procedure. I. Model #G-2 Handle and Arbor
More informationMODEL # 1 MANUAL CAN OPENER
REV.B SERVICE MANUAL MODEL # 1 MANUAL CAN OPENER Model #1 Can Opener Assembly Procedure The Model #1 can opener will be assembled according to the following procedure. I. Model #1 Handle and Arbor Assembly
More informationS E L E C T I O N. Abdominal Crunch. User manual
and S E L E C T I O N T H E S T R E N G T H E V O L U T I O N User manual and and The identification plate of the and manufacturer, affixed along side the seat on the frame of the weight stack, gives the
More informationDIAMOND TECH INTERNATIONAL Innovations For Creativity DIAMOND LASER BAND SAW OPERATIONS MANUAL
SPEEDSTER-XL INSTRUCTION MANUAL DIAMOND TECH INTERNATIONAL Innovations For Creativity SPEEDSTER-XL DIAMOND LASER BAND SAW OPERATIONS MANUAL SPEEDSTER-XL INSTRUCTION MANUAL - PAGE 1 Before You Begin Read
More informationLeica CE/ Leica CN. Knife holder
Leica CE/ Leica CN Knife holder Instruction Manual Leica knife holder CE/ knife holder CN V2.2 English 08/2005 Always keep this manual near the instrument. Read carefully prior to operating the knife holders.
More informationPRODUCT MANUAL - M096
PRODUCT MANUAL - M096 MODEL 270 ELECTRIC CAN OPENER 1 I. LABELS L087--CAUTION 2 II. SPECIFICATIONS MODEL NO. 270 POWER 115 VOLT, 1.5 AMP, 50-60HZ REQUIREMENTS 230 VOLT, 0.8 AMP, 50-60 HZ NORMAL SPEED 200-250
More informationFORM (Apr. 2006)
2212 Slcier MODEL 2212 SLICER MODEL 2212 ML-136132 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com FORM 35215 (Apr. 2006) Installation, Operation, and Care of MODEL 2212 Slicer
More informationOperator s Manual. Medium-Duty Electric Slicers ENGLISH. Item Model Description Drive Peak HP Voltage Amps Hz Plug
Medium-Duty Electric Slicers 40950 40951 Item Model Description Drive Peak HP Voltage Amps Hz Plug 40950 SLM250/S 10 Knife Medium-Duty Slicer 1/3 2.5 Belt 120 60 5-15P 40951 SLM300P/S 12 Knife Medium-Duty
More informationBERYL Service Guide. Travel Adjust OTT Change
BERYL Service Guide Travel Adjust OTT Change SERVICE OVERVIEW This manual will guide you step by step performing a travel adjust and OTT setting change to your Beryl suspension fork. Please follow each
More informationApplication Tooling Specification
Order No. 200218-3100 FEATURES Application Tooling Specification A full cycle ratcheting hand tool ensures complete crimps Long handles for comfortable crimping with reduced crimping force and a safety
More informationProfessional Mandoline Manual. Model: 90757
Professional Mandoline Manual Model: 90757 Introduction Your MIU France Composite Mandoline features a selection of blades with variable thickness adjustments which make it one of the most versatile kitchen
More information8713S Premium Slicer Operators Manual
873S Premium Slicer Operators Manual Persons under the age of 8 are not permitted to operate or have accessibility to operate this equipment per U.S. Dept. Of Labor employment standards administration
More informationContents. Awnings USA - Full Protective Hood Manual Instructions ft 11" - 11ft 6" Awnings
Awnings USA - Full Protective Hood Manual Instructions Contents Warning We recommend that two or more people are required to lift the awning into place. 4ft 11" - 11ft 6" Awnings 8 x Expansion bolts **
More informationEst A TRADITION OF EXCELLENCE INSTRUCTION BOOK.
Est. 1887 A TRADITION OF EXCELLENCE INSTRUCTION BOOK www.wolseleygrooming.co.uk Stockshop (L.E.) Ltd., Lodge Trading Estate, Broadclyst, Exeter EX5 3BS Email: service@stockshop.co.uk Tel: 01392 460077
More informationWARNING: There is a possibility of death, serious injury, or physical loss resulting from improper use by ignoring this indication.
User's Guide to the FS-C81 Instruction Manual for High Precision Fiber Cleaver 1. Warning and Cautions WARNING: There is a possibility of death, serious injury, or physical loss resulting from improper
More informationIMPORTANT NOTICE. Professional Mandoline Manual
IMPORTANT NOTICE PLEASE DO NOT RETURN TO STORE. If you have any problems with this unit, contact Consumer Relations for service. PHONE: 206-605-0555 Please read operating instructions before using this
More informationINSTRUCTION MANUAL ALEKO RETRACTABLE AWNING
INSTRUCTION MANUAL for ALEKO RETRACTABLE AWNING www.alekoproducts.com FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY! 1 Important Safety Precautions WARNING NOTE: FOR PERSONAL SAFETY,
More informationPATRIOT INSTRUCTION MANUAL SL300C 12 MEAT SLICER 1/2 HP
INSTRUCTION MANUAL SL300C 12 MEAT SLICER 1/2 HP This manual contains important information regarding your Patriot unit. Please read this manual thoroughly prior to equipment set-up, operation and maintenance.
More informationINSTALLATION INSTRUCTIONS AND OWNER'S MANUAL AWNINGS. For trailers & motor homes with straight sides TOOLS REQUIRED
AWNINGS INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL For trailers & motor homes with straight sides TOOLS REQUIRED 1/4" electric drill Ratchet handle kit 3/8" & 7/16" socket No. 1 and No. 2 screwdriver
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire
More informationTHE EDGE12 SLICER. MODEL EDGE12-2 (220/50/1 voltage) FORM (July 2012) EDGE12 SLICER
EDGE12 SLICER THE EDGE12 SLICER MODEL EDGE12-1 (120/60/1 voltage) EDGE12-2 (220/50/1 voltage) ML-136246 ML-136247 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com FORM 35283 (July
More informationPrimrose Awnings Full Cassette Manual & Electric Instructions
Primrose Awnings Full Cassette Manual & Electric Instructions Contents for Full Cassette Awning 1 x Remote control receiver box 2 x Remote hand-held zappers 1 x 5 metre cable 1 x Template sticker **The
More informationGosford Aquifier (Pre 2009) Replace O-rings here
Gosford Aquifier (Pre 2009) Replace O-rings here Gosford Aquifier (Pre 2009) General Advice: These instructions are intended as a guide only, if you are in any doubt you should seek the advice of a qualified
More informationThomas Scientific Swedesboro, NJ U.S.A.
Thomas Scientific Swedesboro, NJ 08085-0099 U.S.A. Wiley Laboratory Mill, Model 4 3375-E10 (115 V, 50/60 HZ) USE AND CARE OF CATALOG NUMBER: 3375-E10 Wiley Laboratory Mill, Model 4 (115 V, 50/60 HZ) UNPACKING
More informationMandolin Slicer Quite possibly the safest mandolin in the world
Mandolin Slicer Quite possibly the safest mandolin in the world MANDOLIN & COMPONENTS Handle Upper Plate Safe Hands Food Holder Non-Slip Retractable Leg Julianne Blades (3 sizes) Waffle / Crinkle Cut Blade
More informationRoller Bar End Cap (w/round Drive Shaft) Replacement Instructions for Vista and Motorized Awnings * Helpers needed *
RETRACTABLE AWNINGS For Technical Support visit us at www.sunsetter.com/ownerscorner or Call Toll Free 800-670-7071 Fax 877-224-4944 Roller Bar End Cap (w/round Drive Shaft) Replacement Instructions for
More information300 ft. 5/8 Hose wagon
300 ft. 5/8 Hose wagon Model 95956 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. (Garden hose is not included).
More informationVISIT OUR WEBSITE: OR CALL US TOLL FREE AT
Model #710 WATH THE VIEO Owner s Manual VISIT OUR WEBSITE: WWW.LIBERTYGARENPROUTS.OM OR ALL US TOLL FREE AT 1-866-820-5805 LIBERTY GAREN PROUTS, IN. 1161 SOUTH PARK RIVE, KERNERSVILLE N 27284 IMPORTANT:
More informationUrea/Adblue Hose Reel
www.scintex.com.au sales@scintex.com.au Model: SHR3408 Urea/Adblue Hose Reel Product Manual Specifications Spring driven drum: for automatic rewind. Locking ratchet: to maintain the desired length of hose
More informationTidland Series 'C' Knifeholder MAINTENANCE MANUAL Crush Cartridge Class I, II, III Crush Slitting
Tidland Series 'C' Knifeholder MAINTENANCE MANUAL Crush Cartridge Class I, II, III Crush Slitting Please read and understand all the instructions before you start to maintain the Tidland Series 'C' Knifeholder.
More informationMaintenance and care of the. German Red Clipper and its blades
BLADE SYSTEM One of the reasons for the superior cutting power of the German Red Clipper is its unique blade system: The pressure on the top blade can be adjusted according to the type of coat. If the
More informationTITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V
TITAN pt. no.: 02 0000 0128 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationUSER MANUAL BMU WORKCAGE. CONFORM TO THE MACHINE DIRECTIVE 2006/42/EC and to EN1808 (1999)
USER MANUAL BMU WORKCAGE CONFORM TO THE MACHINE DIRECTIVE 2006/42/EC and to EN1808 (1999) All persons operating this equipment must read and completely understand this manual. Any operation in violation
More informationPlease read this guide carefully. It tells you how to prepare your cutting plotter for production use in a few easy steps.
OPERATING GUIDE for Secabo mini Cutting Plotter Congratulations on purchasing your Secabo mini cutting plotter! Please read this guide carefully. It tells you how to prepare your cutting plotter for production
More informationelectric knife sharpener
electric knife sharpener USER GUIDE Now that you have purchased a Kitchen Living product you can rest assured in the knowledge that as well as your year parts and labour guarantee you have the added peace
More informationInstallation & Operation Manual VHM Variable Height Series Arms with Fixed Angle Front End
3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation & Operation Manual VHM Variable Height Series Arms with Fixed Angle Front End Products covered
More informationNEWMAR SERVICE SCHOOL
NEWMAR SERVICE SCHOOL TRAINING INFORMATION GUIDELINE FOR FEBRUARY 2013 OUR PRODUCTS: NOVA DUAL PITCH AWNING G-2000/ G-1500 2 P a g e G-2085 G-5000 3 P a g e G-LINKS 4 P a g e NOVA/ G-2000/ G-1500 BASIC
More informationPlease read this guide carefully. It tells you how to prepare your cutting plotter for production use in a few easy steps.
OPERATING GUIDE for Secabo C30 and C40 cutting plotters Congratulations on purchasing your Secabo cutting plotter! Please read this guide carefully. It tells you how to prepare your cutting plotter for
More informationRetractable Hose Reel
Retractable Hose Reel installation and Operation Please read before use We recommend keeping these instructions for future reference Hose Reel must be mounted before use Keep the hose retracted when not
More information1000S Premium Automatic Slicer Operator s Manual
000S Premium Automatic Slicer Operator s Manual Persons under the age of 8 are not permitted to operate or have accessibility to operate this equipment per U.S. Dept. Of Labor employment standards administration
More informationPrimrose Awnings Half Cassette Manual & Electric Instructions
Primrose Awnings Half Cassette Manual & Electric Instructions Contents for 2.5m, 3m Awnings 4 x Expansion bolts (2 per bracket)** 2 x brackets 1 x Awning Contents for 3.5m, 4m Awnings 6 x Expansion bolts
More informationRAFTER VI. Installation and Operation CAREFREE WITH AUTOMATIC AWNING SUPPORT. RV Accessory PRODUCT OVERVIEW
CAREFREE RAFTER VI RV Accessory WITH AUTOMATIC AWNING SUPPORT Installation and Operation PRODUCT OVERVIEW The gives the awning user the ability to easily tighten the center fabric when the awning is extended.
More informationGoBidet Bidet Attachment
GoBidet Bidet Attachment 151 Ruths Place #5 Sequim, WA 98382 Tel 1-800-681-0753 Fax +1 360-681-4029 www.go-bidet.com MODEL #2003C In this box: 1 User Manual 1 GoBidet Unit w/ mounting bracket, nut, rubber
More informationPrimrose Awnings Half Cassette Manual & Electric Instructions
Primrose Awnings Half Cassette Manual & Electric Instructions Contents Contents for 2m, 2.5m, 3m Awnings 2 x wall brackets 4 x expansion bolts (2 per bracket)** 1 x Awning Contents for 3.5m, 4m and 4.5m
More informationUser s Manual Trampoline 8
User s Manual Trampoline 8 Model! WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Maximum user weight 17 lbs. ASSEMBLY IMPORTANT
More informationHow to operate TBC-553L
How to operate TBC-553L 1. An example (Cutting length : 70mm, Cutting quantity : 120 pcs) Turn on the POWER SW. Set cutting length. (Press the following buttons in order.) Set cutting quantity. Press START
More information4A1-114/114KR & 4A1-2 MANUAL TENSIONERS
M L. C O O N AL TO 4A1-114/114KR & 4A1-2 W W W.T R AD IT IO MANUAL TENSIONERS READ THESE INSTRUCTIONS CAREFULLY. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN SEVERE PERSONAL INJURY. GENERAL SAFETY
More informationPaperfox EVV-3 Cardboard Edge Protector Cutter. Instructions manual. Last modification: 03.MAR.2018.
Paperfox EVV-3 Cardboard Edge Protector Cutter Instructions manual Last modification: 03.MAR.2018. Application of the EVV-3 Cardboard Edge Protector Cutter The EVV-3 Cardboard Edge Protector Cutter is
More informationFLEX KEY ASSEMBLY. ..._ o RAFTER ARM TUBE MAIN ARM TUBE CAP NUT CLAW HINGE
ZIP DEE Inc. 96 Crossen Ave. Elk Grove Village, IL 60007(847)437-0980 (800)338-2378 HEAD CASTING AWNING RAIL FLEX KEY ASSEMBLY..._ o GM1 Installation Instruction GMC Motorhome RAFTER ARM TUBE MAIN ARM
More information* * KR54-F, KR9854 & KR9954 Installation Instructions. Read All Warnings Before Starting Installation! Index:
*941061-00* 941061-00 Keyed Removable Mullion KR54-F, KR9854 & KR9954 Installation Instructions CLASSIFIED CLASSIFIED C Read All Warnings Before Starting Installation! Index: General Information ----------------
More informationInstruction for edge trimming knife sharpening of M-Type shoe sewing machines
Instruction for edge trimming knife sharpening of M-Type shoe sewing machines 1. Introduction This instruction is a supplement to the instruction for use of electric table sharpener; thus the scope of
More informationINSTRUCTION 8512 MANUAL. MAX SERIES Slicer WE THANK YOU FOR YOUR PURCHASE OF OUR MODEL 8512 SLICER. 8512/498 EDS
INSTRUCTION MANUAL MAX SERIES Slicer WE THANK YOU FOR YOUR PURCHASE OF OUR MODEL SLICER. /498 EDS TABLE OF CONTENTS DESCRIPTION PAGE Table of Contents 1 List of Illustrations 1 Introduction 3 Installation
More informationModel 698/ and Model in 1 Hose Reel Owner s Manual
Model 698/694 200 and Model 706 100 4 in 1 Hose Reel Owner s Manual 698/694 706 VISIT OUR WEBSITE: WWW.LIBERTYGARDENPRODUCTS.COM OR CALL US TOLL FREE AT 1-866-820-5805 LIBERTY GARDEN PRODUCTS, INC. 500
More informationPATRIOT INSTRUCTION MANUAL SL300ES, 300ES MEAT SLICER
PATRIOT INSTRUCTION MANUAL SL300ES, 300ES-12 12 MEAT SLICER This manual contains important information regarding your unit. Please read this manual thoroughly prior to equipment set-up, operation and maintenance.
More informationBevel Buddy Instruction Manual
Bevel Buddy Instruction Manual We at Precision Sharpening Devices Inc. believe there are two very important steps in maximizing the savings this equipment can provide your company. First, use this manual
More informationPrimrose Awnings - Full Cassette Manual & Electric Instructions
Primrose Awnings - Full Cassette Manual & Electric Instructions Contents Warning 2.0m - 3.5m Awnings 8 x Expansion bolts ** 2 x brackets 1 x Awning 1 x Winder 4.0m - 5.0m Awnings 12 x Expansion bolts **
More informationHow to operate TC-38A
How to operate TC-38A 1. Installation 1 Support connection: Referring to the cover page of this INSTRUCTION MANUAL, fasten two small wrench bolts in backside by 6mm-wrench and fasten three large bolts
More informationInstallation Guide. LPKPDR - Universal LP Conversion Kit for Professional & Designer Ranges/Rangetops. Viking Range, LLC.
Installation Guide Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641 LPKPDR - Universal LP Conversion Kit for Professional
More informationProfessional Mandoline Manual. Model: 90797
Professional Mandoline Manual Model: 90797 Introduction Your MIU France Stainless Steel Mandoline features a selection of blades with variable thickness adjustments which make it one of the most versatile
More informationCLIPPERMAN INSTRUCTION MANUAL
CLIPPERMAN INSTRUCTION MANUAL THE KNOWLEDGE AND POWER TO OUTPERFORM Welcome to Clipperman and thank you for purchasing your new product from our range, and placing your trust in us. GUARANTEE & WARRANTY
More informationINSTANT GARAGE MODEL NO: CIG81224 ASSEMBLY INSTRUCTIONS PART NO: ORIGINAL INSTRUCTIONS
INSTANT GARAGE MODEL NO: CIG81224 PART NO: 3503578 ASSEMBLY INSTRUCTIONS ORIGINAL INSTRUCTIONS GC1117 INTRODUCTION Thank you for purchasing this CLARKE Instant Garage. When erected, the CIG81224 garage
More informationAND LOAD CANOPY RACK SPECIFICATIONS
8MAY15 INSTRUCTIONS for the LOCK AND LOAD CANOPY RACK SPECIFICATIONS and SAFE LOADING REQUIREMENTS The Lock and Load ladder carrier for Truck Caps is a rack designed to mount to the top of a pickup truck
More information300 Model 870 Four Wheel Hose Cart Owner s Manual
300 Model 870 Four Wheel Hose Cart Owner s Manual IMPORTANT: READ THE OWNER S MANUAL BEFORE ASSEMBLING TOOLS REQUIRED: TWO ADJUSTABLE WRENCHES; HAND PUMP Estimated assembly time: 30 minutes PARTS LIST
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL General Safety Rules WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/ or serious injury. The term power
More informationInstallation GUIDE. NKVGR Natural Conversion Kit for 7 Series Ranges/Rangetops
Installation GUIDE NKVGR Natural Conversion Kit for 7 Series Ranges/Rangetops Table of Contents Warnings... 3 Kit Contents... 3 Regulator Conversion... 4 Infrared Broiler Conversion... 5 Surface Burner
More informationt420 Barbecue Assembly Manual
t20 Barbecue Assembly Manual 85-300-2 (G510) Propane 85-3005-0 (G5105) Natural Gas 1 Year limited Warranty Read and save manual for future reference. If pre-assembled, leave this manual with unit for consumer
More informationPrimrose Awnings - Standard Manual Instructions
Primrose Awnings - Standard Manual Instructions Contents Warning 1.5m - 3.0m Awnings 4 x Expansion bolts (2 per bracket)** 2 x brackets 1 x Awning 1 x Winder handle 3.5m - 4m Awnings 6 x Expansion bolts
More informationRUPHIS Blade Clamp. Instruction Manual
RUPHIS Blade Clamp P/N 1006800 NSN 1615-01-562-8156 Instruction Manual AH-64D UH-60A/L UH-60M S-70i S-92 REVISION AUTHORIZATION / RECORD These instructions are primarily for inspection of the RUPHIS Blade
More informationOtter Pro XT Cabin Installation and Set-Up Instructions
Otter Pro XT Cabin Installation and Set-Up Instructions Otter Pro XT Cabin Fits Medium Otter Pro and Otter II Sled Only Parts Identification and Check List MODEL NUMBERS: Complete Pkg Pro XT Thermal Cabin
More informationDC 700 Series Hose Reel - September 2010
Instructions Parts List Service Manual DC 700 Series Hose Reel - September 2010 Suitable for dispensing, transfer and evacuation of lubricants, fuels, air & other automotive & industrial products. To be
More informationAccu-Chart TM Healthcare Systems, Inc.
Accu-Chart TM Healthcare Systems, Inc. Training Guide for DeBlister-RX 1305 Remington Rd., Suite I Schaumburg, IL 60173 847-252-7183 Fax: 630-307-5982 techsupport@accuchart.com Accu-Chart TM Healthcare
More information280 Propane Barbecue Assembly Manual
280 Propane Barbecue Assembly Manual 85-3001-8 (G20718) Propane 1 Year limited Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts claims must
More informationUser Manual. Meat Slicer Instruction Manual. Model: 177SL612A 10/2018. Please read and keep these instructions. Indoor use only.
Meat Slicer Instruction Manual Model: 177SL612A 10/2018 Please read and keep these instructions. Indoor use only. www.avantcoequipment.com 1 Unpacking: Unpack the product and check for any damage incurred
More informationFORM Rev. A (Feb. 2004)
2812B SLICER MODEL 2912B SLICER MODEL 2912B SLICER MODEL 2912B ML-134251 ML-134252 Previous models covered by this manual: 2912B ML-134123 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com
More informationOperations Manual. Please Retain for Future Use.
LS VR Manual Vert 2.19.13_Layout 1 4/3/13 10:24 AM Page 1 Model # LS01 ADA Compliant The Original One-At-A-Time Lid Dispenser Dispenses More Kinds of Lids - dispenses more cold drink, hot drink, tabbed,
More informationTCWS.38NG03.C BLACK DIAMOND BURNER KIT INSTRUCTIONS
IMPORTANT: THESE INSTRUCTIONS ARE TO REMAIN WITH THE HOMEOWNER These instructions are supplementary to the Installation and Operating Instructions supplied with the fireplace and should be kept together.
More informationSafety. Set up and align scale. Congratulations
seca 725 1 Congratulations In purchasing the seca 725 baby scale, you have acquired a highly-accurate and yet sturdy piece of equipment. seca has been putting its experience at the service of health for
More informationImportant! Read all of these instructions before assembling or riding the glider. For questions or help please call Glide Bikes at
Go Glider Manual Congratulations on your purchase of the Go Glider! Your glider is designed for years of nearly carefree use by your child. These instructions include how to set up your glider and maintenance
More informationPR-429BF-600M. Bell 429 Blade Fold Kit Operations Manual
Table of Contents Table of Contents... 1 Record of Revisions... 2 References... 3 Introduction... 4 Contact Information... 4 Prerequisites... 5 First Time Use... 6 Blade Clamp Placement... 6 Blade Clamp
More informationCRD120SC TUBING CUTTER
CRD120SC TUBING CUTTER OPERATIONS MANUAL 1 VERSION 2.1 LAST EDITED 05.01.2018 cleanroomdevices.com Table of Contents Table of Contents....2 1.0 General Product & Safety Information... 3 1.1 Product Information
More informationOWNER S TECHNICAL MANUAL
OWNER S TECHNICAL MANUAL Heavy Duty Oil Hose Reel 504200 Description Open hose reel for air, water (high or low pressure), oil or grease, depending on model. Uncoil the hose to the desired length. It can
More informationquick and easy installation guide
www.directdriveopener.com quick and easy installation guide Back 2 Front. Motor Carriage 2. C-rail. Chain. Limit stops. Slide in part (tensioner) Rail assembly Insert C-rail parts () into the connecting
More informationDO NOT USE WITH CROSSBAR SPREAD LESS THAN 24.
TM Please read all instructions carefully before assembly, installation and/or use of this product. DO NOT USE WITH CROSSBAR SPREAD LESS THAN 24. WARNING: Do not exceed the weight limit of your vehicle
More informationMK3000. Operating and Calibration Instructions
MK3000 Operating and Calibration Instructions CONTENT 1. INTRODUCTION 3 1.1. GENERAL INFORMATION. 3 1.2. WORKING PRINCIPLE. 3 1.3. SECTION THROUGH CUTTER.. 4 1.4. SPECIFICATIONS.. 5 2. INSTRUCTIONS FOR
More information--- BIG LEAGUE BATTING CAGE ---
--- BIG LEAGUE BATTING CAGE --- BGLC-7500 Call Jaypro Sports Equipment at 1-800-243-0533 during regular business hours for technical support. www.jaypro.com Rev-B Page 1 of 22 IMPORTANT NOTICE: 1. BEFORE
More informationTHIS CLIPPER IS INTENDED FOR HOUSEHOLD USE ONLY.
2. INDEX Please read all instructions carefully to familiarize yourself with the Wahl Clipper before using. THIS CLIPPER IS INTENDED FOR HOUSEHOLD USE ONLY. Save these instructions for further reference.
More information