ERGo-ize Your Ultimate AR

Transcription

1 2017

2 ERGo-ize Your Ultimate AR ERGO SOCKS PAGES RAIL COVER GRIPS PAGES ERGO RAIL SYSEMS PAGES NEVER QUI MAGWELL GRIP PAGE 14 RAIL ACCESSORIES PAGES ERGO RIFLE GRIPS PAGES 6-15 & BACK COVER able of Contents: Rifle Grips ERGO Stocks Rail Systems Rail Accessories Rail Cover Grips Handgun Grips Shotgun Accessories Accessories Page 2 Calloll Page 3

3 Rifle grips Human engineered for Competition Hunting Home Defense / Police / Military

4 ERGO 2 AR & SCAR HE ORIGINAL ERGO GRIP he original ERGO Grip, developed by Steve Hines, was the first truly ergonomic, shooter focused grip for AR platform rifles. Designed for performance by creating a better interface between the shooter and firearm, the ERGO Grip is the standard by which positive grip and shooter comfort are measured. he ERGO Grip comes with the patented Gapper (page 15), and ergonomic plug, for increased comfort BK AR $28.50 SureGrip he ERGO 2 shows ERGO Grip s dedication to shooter focused accessories. Developed in response to requests for an ERGO Grip with an A2 cavity, the ERGO 2 accepts common tools and accessories designed to fit in an AR-15 grip. he ERGO Grip comes with the patented Gapper (page 15) BK 4011-BK 4011-DE 4011-OD RIGID 4015-BK 4009-DE 4010-DE 4010-OD 4010-GG 4010-PK 4010-PUR 4009-PUR Fits AR-15 type firearms in.223 and.308 Ergonomically correct finger grooves Integrated rear upper extension supports the web of your hand A Aggressive texture improves weapon control Virtually impervious to oils and solvents Over molded SureGrip material Comes with he Gapper and ergonomic plug ERGO SWIF GRIP *DUAL USE COMPAIBLE WIH SHOGUN ADAPER #4453 AND #4454 $18.50 he ERGO Swift Grip was designed for shooters who prefer or need to use a compact stance when shooting their rifle, such as in vehicle operations or while using PDWs. he reduced grip angle improves comfort and control. he textured shape provides a positive grip in all environments. Reduced grip angle designed for compact shooting positions and PDWs Rigid Polymer construction Shaped and textured for maximum handling and control *DUAL USE COMPAIBLE WIH SHOGUN ADAPER #4453 AND #4454 ERGOGrips. www CB *DUAL USE COMPAIBLE WIH SHOGUN ADAPER #4453 AND # BK Page BK Design allows installation on both.223 and.308 AR-15 type lower receivers. A2 sized inner cavity compatible with many accessories available on the market. Ergonomically correct finger grooves Integrated rear upper extension supports the web of your hand. Over molded SureGrip material provides non-slip grip Virtually impervious to oils and solvents Comes with he Gapper Also available in Robin s Egg Blue 4005-PK 4009-OD $32.25 SCAR SureGrip-A 4009-BK 4010-BK net l l a C oll Page 7

5 ERGO ACICAL DELUXE GRIPS E RGO Grip products focus on the shooter. he actical Deluxe is no exception. Designed with shapes and contours to fit the human hand, the actical Deluxe is a larger, more rounded grip for exceptional comfort and control. he ergonomically enhanced actical Deluxe Grip fits.223 and.308 rifles. Fits AR-15 type firearms in.223 and.308 Over molded SureGrip material with heavy texture Ambidextrous palm swell Fits medium to large hands *DUAL USE COMPAIBLE WIH SHOGUN ADAPER #4453 AND # BK $43.50 FLA OP ACICAL DELUXE GRIPS $ BK E RGO Flat op actical Deluxe grips are specifically designed to work with chassis style rifle platforms. heir modified configuration fits flush with the receiver and provides all the benefits of the ERGO actical Deluxe such as increased grip, comfort and control. Fits modern chassis system stocks commonly made for bolt action rifles. Over molded SureGrip material with heavy texture Ambidextrous palm swell Fits medium to large hands *DUAL USE COMPAIBLE WIH SHOGUN ADAPER #4453 AND # BK 4045-DE 4045-OD 4025-BK 4025-DE ACICAL DELUXE WIH PALM SHELF he actical Deluxe with Palm Shelf takes comfort and control to a new level. It has the same shape and size as the actical Deluxe, but features a rest on the bottom of the grip to support the hand, allowing better trigger control. In particular this grip configuration excels on precision rifles. he ergonomically enhanced actical Deluxe Grip fits.223 and.308 rifles. Same grip features as our original ERGO Grips, but in a heavier textured design to fit large AR/M4 rifles, with a rear upper web support Ambidextrous palm swell provides shooters with proper trigger finger placement Adjustable palm shelf for strong hand support and trigger control *DUAL USE COMPAIBLE WIH SHOGUN ADAPER #4453 AND # BK $64.50 ACICAL DELUXE FLA OP PALM SHELF $ BK he actical Deluxe Flat op with Palm Shelf takes comfort and control to a new level. It has the same shape and size as the actical Deluxe, but features a rest on the bottom of the grip to support the hand, allowing better trigger control. In particular this grip configuration excels on precision rifles. Same grip features as our original ERGO Grips, but in a heavier textured design to fit large AR/M4 rifles Ambidextrous palm swell provides shooters with proper trigger finger placement Adjustable palm shelf for strong hand support and trigger control *DUAL USE COMPAIBLE WIH SHOGUN ADAPER #4453 AND # BK 4055-DE 4055-OD 4035-BK 4035-DE Page 8 Calloll Page 9

6 ERGO MSR GRIPS he ERGO MSR Grip, for Modern Sporting Rifle, is perfect for shooters looking for an easy, bolt on upgrade for their standard AR grip. A significant improvement over the A2 style grip, the MSR shape and texture provide better control and comfort. Ergonomic shape and texture for excellent control and comfort Integral rear upper extension supports the web of the shooter s hand Patent# D740,910 DUAL USE COMPAIBLE WIH SHOGUN ADAPER #4453 AND #4454 $ BK ERGO AK CLASSIC & FAL MERIC GRIPS he same comfort and control as the original ERGO Grip, but for AK and FAL (Metric) platform rifles. A definite upgrade over the stock grips on these classic rifles. Over molded SureGrip material provides non-slip grip Ambidextrous design with smooth finger grooves Superior design and textured finish for enhanced weapon control Bottom storage compartment with tethered rubber plug $28.50 FAL 4106-BK Fits metric pattern FAL type rifles Does not come with screw ERGO SO GRIP he ERGO SO grip is a standard A2 style grip with the addition of a hinged floor plate for secure storage of accessories or spare parts. Molded from glass filled polymer. Available in black or flat dark earth. $21.95 AK Rigid $21.50 $28.50 AK 4130-BK Rigid polymer construction. Installs with 6mm screw (included) Does not have plug New Design also fits PAP AK Firearms 4139-BK Installs with 6mm screw (included) New design also fits PAP AK Firearms Availbe in Robin s Egg Blue 4095-DE 4095-BK 4095-DE 4139-GG 4139-DE 4139-OD 4139-PUR 4139-PK Page 10 Calloll Page 11

7 VERICAL FORWARD GRIPS ERGO MINI-MAX VFG his VFG is the most versatile available. As well as serving as a traditional vertical forward grip, it is small enough to be used like an angled forward grip, or even as a forward hand stop. Very sturdy design. XPRESS LEVER VFG All aluminum vertical forward grip with grooved grip area XPRESS lever mount and thumb screw for quick attachment and removal from Picatinny rails Length 3 Weight 4.6 ounces Grip comes straight off so removal does not require removal of other rail mounted accessories $ BK ERGO SRAIGH BROOM HANDLE VFG his traditional VFG is comfortable and rugged. A durable hard plastic core is over molded with rubber and bolted to an aluminum base. Available with either the ERGO XPRESS lever system, or with a base that bolts directly to military style AR-15 two piece hand guards. A storage compartment with a threaded cap is standard. Features an over molded rubber grip attached to durable anodized base with steel bolt he threaded cap seals the storage area, each comes with a foam insert XPRESS Mount model attaches to Picatinny rails without removing other rail accessories $ BK 4255-BK 4255-DE 4255-OD *COMPAIBLE WIH SHOGUN RI-RAIL FORENDS XPRESS MOUN HANDGUARD MOUN ERGO POP BOLE VFG he Pop Bottle VFG is a basic, no frills, rugged VFG. Made from polymer, this one piece VFG slides onto Picatinny rails and is secured with a cross bolt. Injection molded Vertical Forward Grip, extremely durable and tough Slide rail mount to Picatinny rails with cross bolt section Also comes in Dark Earth and OD Green 4253-BK $21.75 $ BK *COMPAIBLE WIH SHOGUN RI-RAIL FORENDS *COMPAIBLE WIH SHOGUN RI-RAIL FORENDS 4253-BK 4253-DE 4253-OD Page 12 Calloll Page 13

8 ERGO GRIP VFG M ade with an ERGO Grip, this VFG gives the support hand the same comfort and control as the strong hand when using an ERGO Grip. Ambidextrous forward grip attached to anodized mounting base Fits Picatinny rails with nut/clamp bar mount *COMPAIBLE WIH SHOGUN RI-RAIL FORENDS $ BK SURE SOP his fantastic, easy to install tactical hand stop is perfect for use on any rifle, carbine or shotgun where a positive forward stop is needed for the support hand BK $13.25 Useful on short barrel rifles and shotguns Can act as a hand positioning device *DUAL USE, COMPAIBLE WIH RIFLES AND SHOGUNS ERGO NEVER QUI MAGWELL GRIP 4965-BK $26.75 Reconfigures the squared shape of the AR/M4 magazine well into an ergonomic and comfortable grip option Gives AR/M4 receivers a distinctive aesthetic upgrade Easy installation Oil and solvent resistant Santoprene construction NOA Recommended Also avilable in Purple and Robin s Egg Blue 4965-BK 4965-DE 4965-OD 4965-PK 4965-CB 4965-GG GAPPER $4.00 $ PK Fills the gap between the trigger guard and the pistol grip on the AR/M4 and cushions your knuckle, prevents abrasion to your finger and provides a more finished look to your rifle. he GAPPER is made from solvent resistant Santoprene, clips in easily, and secures with a tight friction fit. Patent # 6,434,874 A2 PISOL GRIP PLUG *HIS FIS AR-15/M-16 LOWER RECEIVERS WIH A REMOVABLE RIGGER GUARD. I DOES NO FI AR-10 LARGE FRAME RECEIVERS OR RECEIVERS WIH A PERMANENLY AACHED RIGGER GUARD. $ Designed to plug the cavity on the bottom of a standard A2 grip, this press fit plug is secured by friction. he plug prevents debris from lodging in the cavity of the grip and functions as a shock absorbing pad to protect the grip when setting the rifle down on hard surfaces. Page 14 Calloll Page 15

9 f93 pro stock ERGO stocks NEW for

10 F93 PRO SOCK E ight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions. RUBBER BU PAD INCLUDED MULIPLE SLING AACHMEN POINS ONE OF HE LONGES LENGH OF PULL ADJUSMENS AVAILABLE ALUMINUM QUICK RELEASE SLING AACHMEN POINS INCLUDED FIXED CHEEK PIECE PROVIDES SUPERIOR COMFOR AND CONSISEN CHEEK WELD FOR BEER ACCURACY EIGH ADJUSABLE POSIIONS SOCK SOLIDLY LOCKS INO POSIION LIKE A FIXED SOCK. NO MOVEMEN OR RALES CASLE NU INCLUDED OVER MOLDED BUFFER UBE INCLUDED AMBIDEXROUS SLING LOOP INCLUDED $ Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters experience with a carbine stock Includes an over molded carbine length buffer tube, standard castle nut and ambidextrous sling plate Includes rubber-like recoil pad for enhanced comfort and secure, positive placement Includes 2 quick detach sling attachment points, 3 web sling attachment points and 2 sling hook attachment points 8 inches from receiver to butt plate when collapsed, 12 inches when fully extended Weight is only 1.3 pounds Also available in Robin s Egg Blue Black Dark Earth OD Green LARGE FRAME AR AR BK 4925-BK 4924-DE 4925-DE 4924-OD 4925-OD LARGE FRAME AR AR 15 Graphite Grey Pink Purple 4924-GG 4925-GG ERGO F93 PRO SOCK BU PAD ERGO F93 Pro Stock Butt pad Black *DUAL USE, COMPAIBLE WIH RIFLES AND SHOGUNS $ BK 4924-PK 4925-PK ERGO F93 PRO SOCK SRIKE PLAE 4924-PUR 4925-PUR Protects the ERGO F93 Pro Stock from damage and impact Machined from anodized aluminum *DUAL USE, COMPAIBLE WIH RIFLES AND SHOGUNS $ Page 18 Calloll Page 19

11 Rail systems z rail z float M-Lok keymod

12 ERGO MODULAR KEYMOD RAIL SYSEM he ERGO Modular Float KeyMod Rail System provides a 2 outside diameter and a generous 1.8 inside diameter designed to accommodate most suppressors while maintaining a clean and sleek profile. Ventilation cutouts aid in rapid cooling, and provide substantial weight reduction. Features integral anti-rotation tabs. KeyMod slots located at 3, 6, and 9 o clock positions allowing users to run with or without rails covers. he rail provides multiple attachment locations for ERGO KeyMod accessories including ERGO WedgeLok slot covers and as a host to other KeyMod compatible products. Installation is simple using the standard USGI barrel nut wrench (not included), all necessary mounting hardware is included construction ype III Class 2 Hard-coat black anodized finish Lightweight one piece free float design CNC machined aluminum barrel nut allows mounting of up to 1 diameter barrels KeyMod design accepts ERGO and all other KeyMod compatible accessories Full length, seamless Mil-Spec 1913 Picatinny top rail Scalloped Picatinny rail slots for comfort 1.8 inside diameter to accept most suppressors Integral anti-rotation tabs For AR-15/M16 platforms (Not AR-10, SR25, etc.) Available in oz, and oz length/weight SUPERLIE MODULAR KEYMOD RAIL SYSEM he ERGO SuperLite Float Modular KeyMod Rail System provides a 1.5 outside diameter and a compact 1.35 inside diameter designed to create a clean and sleek profile. Ventilation cutouts aid in rapid cooling, and provide substantial weight reduction. KeyMod slots located at 3, 6, and 9 o clock positions allowing users to run with or without rail covers. he KeyMod rail provides multiple attachment locations for ERGO KeyMod accessories including ERGO WedgeLok slot covers and as a host to other KeyMod compatible products. Installation is simple using a standard ½ drive 1 3/16 crow foot wrench (not included), all necessary mounting hardware is included Construction ype III Class 2 Hard-coat Anodized Finish Lightweight one piece free float design KeyMod design accepts ERGO and all other KeyMod compatible accessories Full length, seamless Mil-Spec 1913 Picatinny top rail Scalloped Picatinny rail slots for comfort Sleek 1.5 outside diameter and a 1.35 inside diameter For AR-15/M16 platforms (Not AR-10, SR25, etc.) Available in oz, and oz length Made to VLOR Weapons Systems KeyMod Specifications Made entirely in the USA. $ $ $ $ Page 22 Calloll Page 23

13 ERGO KEYMOD ULRA-LIE SLIM RAIL SYSEM he Ultra Lite S KeyMod handguard is a definitive upgrade for any AR carbine that uses a two piece handguard. Simple, drop in replacement with no gunsmithing required. CNC machined from aluminum, these handguards feature a top Picatinny rail and KeyMod slots on the sides and bottom. he Ultra-Lite is also ultra-slim and weighs less than standard plastic hand guards. WO PIECE REPLACEMEN HANDGUARD RAIL SYSEM Aluminum drop-in replacement KeyMod hand guards for AR carbines he ultralight design, 4.9oz, weighs less than standard military M4 plastic hand guards he ultra slim profile measures only 1.95 in height and 1.6 in width KeyMod slots on both sides and bottom for mounting accessories as needed Integral top MIL-SD 1913 Picatinny rail Includes one black ladder rail cover to protect the top rail and for shooter grip and comfort Machined from aluminum Hard coat anodized matte black ERGO KEYMOD ULRA-LIE RAIL SYSEM L ike the Ultra Lite S KeyMod hand guard, the Ultra Lite Z is a major upgrade for any AR carbine that uses a two piece hand guard. hese are a simple, drop in replacement with no gunsmithing required. CNC machined from aluminum, these hand guards feature a top Picatinny rail and KeyMod slots on the sides and bottom. aller than they are wide, this easy to grip configuration is also lighter than standard plastic hand guards. Available anodized matte black. WO PIECE REPLACEMEN HANDGUARD RAIL SYSEM Aluminum drop-in replacement KeyMod hand guards for AR carbines he ultralight design, 5.6oz, weighs less than standard military M4 plastic hand guards he ultra slim profile measures only in height and 1.6 in width KeyMod slots on both sides and bottom for mounting accessories as needed Integral top MIL-SD 1913 Picatinny rail Machined from aluminum Hard coat anodized matte black Includes one black rail cover grip to protect the top rail and for shooter grip and comfort 4807-BK $ BK $ Page 24 Calloll Page 25

14 ERGO Z RAIL SYSEM he ERGO Z Rail Replacement handguard is engineered to provide shooters with an easily installed upgrade for their carbine length AR/M4 weapons systems. Ideal for shooters who prefer a thin profile, lightweight, less permanent installation; this precision crafted mounting platform replaces carbine length handguards without modification. WO PIECE REPLACEMEN HANDGUARD RAIL SYSEM wo piece hard matte black anodized aluminum construction hinner profile for enhanced forward control Black hard anodized finish Includes Black ERGO LowPro Rail Covers Compatible with Adams Arms and similar piston systems Weight: 9.1 ounces 4811-P $ ERGO Z FLOA RAIL SYSEM M ore than just a standard Quad-Picatinny Rail, the ERGO Z Float Rail is engineered for maximum performance for both the shooter and the rifle. his twopiece system is thinner than it is tall, making it lighter weight, more compact and easier to grip than other quad rail systems. Available in mid-length, carbine length and pistol length. WO PIECE FREE FLOA SYLE HANDGUARD RAIL SYSEM wo piece hard matte black anodized aluminum construction hinner profile for enhanced forward control Easy installation without removing barrel Black hard anodized finish Includes Black ERGO LowPro Rail Covers Requires removal of delta ring Compatible with Adams Arms and similar piston systems 4805 $ *WEIGH: 8 OUNCES PISOL LENGH, 4-1/ $ *WEIGH: 11.3 OUNCES CAR/M4 LENGH, 7-3/16 (MUS REMOVE HANDGUARD REAINING CAP) 4813-OS $ *WEIGH: 14.6 OUNCES CARBINE LENGH WIH OVERSHOO AND A2 FRON SIGH CU OU 4813-SPECRE $ *WEIGH: 15 OUNCES SPECRE LENGH, 9-3/16 Page 26 Calloll Page 27

15 ERGO M4 FORWARD RAIL SYSEM his is a stand-alone forward quad Picatinny rail system for AR-15/M4 pattern rifles with a standard A1/A2 front sight base. he M4 Forward rail clamps to the sight base without any modification to the rifle or existing hand guards $96.00 Stand-alone forward rail system for AR/M4 weapons with a standard A1/A2 front sight base Allows for attachment of Picatinny rail mounted accessories forward of the front sight base Provides extended hand hold opportunities for shooters Installs onto A1/A2 front sight base, locking inside the front sight - requiring NO modification to firearm Includes Black ERGO LowPro Rail Covers Weight: 8.7 ounces ERGO KEYMOD FORWARD RAIL SYSEM KeyMod Forward Rail system for carbine style AR rifles. Designed for shooter comfort and performance, this new Forward A Rail is a KeyMod quad system that bolts to and extends forward of an A2 front sight base without modification to the rifle or existing handguards. his allows mounting KeyMod accessories or Picatinny rail sections forward of the front sight, leaving more space on the handguards for better handling and control of the rifle. KeyMod forward rail Mounts to A-2 front sight Black Anodize Aluminum 4237 $ ERGO MODULAR M-LOK RAIL SYSEM he ERGO Modular M-LOK Rail System provides a generous 1.8 inside diameter designed to accommodate suppressors while keeping a sleek profile. Ventilation cutouts aid in rapid cooling and provide substantial weight reduction. he rail system features M-LOK slots at 3, 6 and 9 o clock positions to allow multiple locations of ERGO M-LOK accessories. Manufactured in the USA from aluminum and ype III class 2 hard anodized. he ERGO Modular M-LOK Rail System is available in two different lengths, # weighing 11oz and # , weighing 14 oz. All necessary mounting hardware included. ERGO SUPERLIE MODULAR M-LOK RAIL SYSEM he ERGO SuperLite Modular M-LOK Rail System has an 1.5 outside diameter and 1.35 inside diameter for a very lightweight, slim profile. Ventilation cutouts give rapid cooling and extreme weight reduction. he rail system features M-LOK slots at 3, 6 and 9 o clock positions to allow multiple locations of ERGO M- LOK accessories. Manufactured in the USA from aluminum and ype III class 2 hard anodized. he ERGO Modular M-LOK Rail System is available in two lengths, # weighing 9.2 oz and # , weighing 10.6 oz. All necessary mounting hardware included. $ $ $ $ Construction ype III Class 2 Hard-coat Anodized Finish Lightweight one piece free float design CNC machined aluminum barrel nut allows mounting of up to 1 diameter barrels M-LOK Design to accept ERGO and all other M-LOK accessories Full length, seamless Mil-Spec 1913 Picatinny top rail Scalloped Picatinny rail slots for comfort 1.8 inside diameter to accept most suppressor Integral anti-rotation tabs Available in 12 11oz, and 15 14oz For AR-15/M16 platforms (Not AR-10, SR25, etc.) construction ype III Class 2 Hard-coat black anodized finish Lightweight one piece free float design M-LOK design accepts ERGO and all other M- LOK compatible accessories Full length, seamless Mil-Spec 1913 Picatinny top rail Scalloped Picatinny rail slots for comfort Sleek 1.5 outside and a 1.35 inside diameter For AR-15/M16 platforms (Not AR-10, SR25, etc.) Available in oz, and oz Made to Magpul M-LOK specifications Made entirely in the USA. Page 28 Calloll Page 29

16 ERGO ALUMINUM, ULRA-LIE ALUMINUM & POLYMER U.M.P. SYSEM U NIVERSAL MOUNING PLAFORM ERGO Grip Universal Mounting Platform (U.M.P.) are perfect for adding Picatinny rails to handguards or other applications as needed. New Ultra-Lite U.M.P. rails are 33% lighter than regular aluminum U.M.P. Standard M1913 Picatinny rail configuration Anodized flat black aluminum or lightweight polymer construction Includes mounting hardware and ERGO LowPro Rail Covers (polymer) Mounting does not require alteration of AR Handguard heat shields 4757 $ $ $ $ $36.00 $12.00 $ $ ERGO ALUMINUM KEYMOD U.M.P. SYSEM E RGO Grip is now offering Picatinny rails for direct attachment to KeyMod slots. Designated KeyMod Universal Mounting Platform, these rails are perfect for attaching a section of Picatinny rail to KeyMod Slots where needed without having the bulk or weight of a full length rail. Machined from aluminum and anodized matte black, KeyMod U.M.P. rail sections quickly and easily mount in KeyMod slots to provide a Picatinny attachment point. U.M.P.s come with all necessary mounting hardware and are available in multiple lengths as well as a cantilever version for maximum accessory mounting options. Standard M1913 Picatinny rail configuration Anodized flat black aluminum Includes mounting hardware 4763-BK $ BK $ BK $43.00 U.M.P. Length Slots Part # in. 5 Part # in. 8 Part # in. 10 Part # in. 5- extended U.M.P. Length Slots Hole Spacing Part # in in. Part # in , in. Part # in in. Part # in in. with Radiused Base adaptor Part # in. 29 No Holes Polymer Part # in in. Part # in in. Part # in , 1.700, 2.700, 3.990, in. Ultra-Lite Part # in. 5.7 in. Part # in in. Part # in , in BK $43.00 Page 30 Calloll Page 31

17 ERGO SLING & BIPOD MOUNS Sling Swivel and Mount ERGO Sling Mount 1.5 Inch anodized aluminum rail mount with standard sling loop Attaches with integrated nylon tipped setscrew and jam screw Features a standard AR Sling Loop Includes allen wrench needed for installation *DUAL USE, COMPAIBLE WIH RIFLES AND SHOGUNS 4293 $25.75 Slides onto Picatinny rails and held in place with set screw Designed for mounting a variety of rail accessories, including swivel or bipod Includes installed sling swivel stud Includes allen wrench needed for installation *DUAL USE, COMPAIBLE WIH RIFLES AND SHOGUNS 4295 $ in. ERGO Xpress Mounting System Mounts bipods to Picatinny rails Quickly installed with the use of a single lever Constructed of anodized aluminum ERGO Sling Mount.75 Inch *DUAL USE, COMPAIBLE WIH RIFLES AND SHOGUNS Nut Bipod Mount 4291 $70.75 Slides onto Picatinny rails and held in place with set screw Designed for mounting a sling swivel Includes installed sling swivel stud Includes allen wrench needed for installation *DUAL USE, COMPAIBLE WIH RIFLES AND SHOGUNS 4296 $ in. Mounts bipods to Picatinny rails Quickly installed with the use of a single carry handle nut No tools required Constructed of anodized aluminum *DUAL USE, COMPAIBLE WIH RIFLES AND SHOGUNS 4290 $47.00 HK Style Sling Mount Lever Picatinny Mount Quickly installed with the use of a single lever Includes a 1.5 Picatinny Rail section to increase rail height by.75 Constructed of anodized aluminum *DUAL USE, COMPAIBLE WIH RIFLES AND SHOGUNS 4262 $70.75 Designed for provide an HK style sling mount on any Picatinny rail Constructed of Anodized Aluminum Slides onto Picatinny rails Held in place with integrated nylon tipped set screw and jam screw Includes allen wrench needed for installation *DUAL USE, COMPAIBLE WIH RIFLES AND SHOGUNS 4298 $26.75 Page 32 Calloll Page 33

18 ERGO KEYMOD SLING & BIPOD MOUNS ERGO KEYMOD VFG he VFG is the most versatile available. As well as serving as a traditional vertical forward grip, it is small enough to be used like an angled forward grip, or even as a forward hand stop. Very sturdy design. Mounts flush to KeyMod Slots Black anodized aluminum Also available for M-LOK, Part #4248 *COMPAIBLE WIH #4238-BK MOSSBERG SHOGUN KEYMOD FOREND KEYMOD QD SLING MOUN Q D Sling Mount attaches directly to KeyMod systems, reducing weight and bulk by eliminating the need to first use a section of Picatinny rail before attaching the accessory. he KeyMod Quick Detach Sling Mount is a low profile, lightweight, durable accessory designed to add functionality and versatility to any firearm using a KeyMod system. Machined from billet aluminum and anodized matte black, it lets the user put a QD Sling Mount anywhere on a Key- Mod system where two slots are available. KeyMod quick detach mount Attach QD sling swivel to KeyMod Black Anodized Aluminum Low profile, light-weight, durable Also available for M-LOK, Part #4249 *COMPAIBLE WIH #4238-BK MOSSBERG SHOGUN KEYMOD FOREND KeyMod Bipod Mount Contoured to fit Harris-style bipods Black Anodized Aluminum Also available for M-LOK, Part # $ $26.75 $ BK KEYMOD BIPOD MOUN he new KeyMod Bipod mount is also designed to attach directly to KeyMod systems to reduce weight and bulk. Machined from aluminum and anodized matte black, it provides a bipod attachment point for any KeyMod handguard or forend and is contoured to work perfectly with Harris-Style bipods. All mounting hardware is included. KEYMOD HAND SOP/BARRICADE SOP he KeyMod Hand Stop/Barricade Stop improve performance, safety and comfort of any firearm using KeyMod handguards. he ERGO Grip KeyMod Hand Stop/Barricade Stop is a rugged, multipurpose accessory built for hard use and solid performance. Machined from billet aluminum and anodized matte black, this multifunction accessory can be used as a hand stop, and as a barricade support device for rock solid shooting from vertical structures. he face of the stop has an aggressive machined surface for secure support or grip. All necessary mounting hardware is included. ERGO KeyMod Hand Stop/Barricade Stop in Black Aggressive textured front for enhanced traction on barricades and obstacles Low profile base also functions as a comfortable hand stop Black Anodized Aluminum Also available for M-LOK, Part #4245 *COMPAIBLE WIH #4238-BK MOSSBERG SHOGUN KEYMOD FOREND KeyMod Enhanced Angle Grip Black anodized Aluminum Also can function as a hand-stop Enhanced thumb-over hold Also available for M-LOK, Part #4243 *COMPAIBLE WIH #4238-BK MOSSBERG SHOGUN FOREND 4234 $ BK $53.50 KEYMOD ENHANCED ANGLE GRIP he Enhanced Angle Grip is a multifunction KeyMod accessory designed to improve shooting comfort and performance. he shape and size allow it to function as an angled forward grip improving the thumb-over hold, taking into account the natural angle of the human hand when the support arm is extended forward. he resulting improved weapon and recoil control allows for faster follow up shots and target transitions. he flat rear side also serves as a hand stop. Machined from aluminum and anodized matte black, the ergonomically correct finger grooves have an aggressive pattern machined into the face for a more secure grip. Page 34 Calloll Page 35

19 ERGO RAIL COVER GRIPS ERGO EXURED SLIM LINE RAIL COVERS E RGO Grip s new extured Slim Line rail cover grips are made to protect the shooter, rails and other gear from damage and feature Rhino Hide texturing to provide a great grip. Made from Santoprene, extured Slim Line rail cover grips fully cover Picatinny rails with the lowest, most comfortable profile possible. Protects rails from damage and protects shooters from rail edges. Prevents damage to skin, gear and clothing that contacts rail edges Molded in Santoprene to provide a low profile, rubbery grip surface for improved weapon control 6.8 inches long, easily trimmed for custom fitting *COMPAIBLE WIH ERGO RI RAIL SHOGUN FORENDS #4870, #4865- SHOR, AND #4865 $ BK 4379-DE 4379-OD ERGO LADDER RAIL COVER GRIPS E RGO ladder rail cover grips are the original Picatinny rail cover, and still one of the best available. aking up the smallest amount of space, the ladder rail cover grips protect Picatinny rails from damage, as well as other gear and the shooter from sharp edges. When installed, Ladder Rail Cover Grips provide a comfortable, secure grip. Protects rails from damage and protects shooters from rail edges. Prevents damage to skin, gear and clothing that contacts rail edges Molded in Santoprene to provide a low profile, rubbery grip surface for improved weapon control Easily trimmed for custom fitting Patent #6,725,594 *COMPAIBLE WIH ERGO RI RAIL SHOGUN FORENDS #4870, #4865- SHOR, AND # SLO (3-PACK) PK-BK (BLACK) PK-DE (DARK EARH) PK-OD (OD GREEN) 18-SLO (3-PACK) PK-BK (BLACK) PK-DE (DARK EARH) PK-CB (COYOE BROWN) PK-OD (OD GREEN) PK-GG (GRAPHIE GREY) PK-FG (FOLIAGE GREEN), PK-PK (PINK) PK-PUR(PURPLE) 25-SLO (3-PACK) PK-BK (BLACK) PK-DE (DARK EARH) PK-OD (OD GREEN) $19.50 $34.00 $ PK-BK PK-BK (Available in Single Packs) PK-BK PK-BK PK-DE PK-OD PK-CB PK-FG PK-GG PK-PK PK-PUR Page 36 Calloll Page 37

20 ERGO FULL COVER RAIL COVER GRIPS E RGO Full Cover Rail Grips are the industry standard for complete, rounded profile coverage of Picatinny rails. Full covers clip directly onto Picatinny rails to protect the shooter, rails, and equipment from damage. Like all ERGO rail covers, these can be cut to desired length to accommodate mounted accessories. Clips directly onto Picatinny rails for full rail protection $13.25 Molded in Santoprene to provide a rubbery grip surface for improved weapon control PK-BK Protects unmounted rail areas from damage Prevents damage to gear, such as rappelling ropes, that may be abraded or cut by uncovered rail sections 4360 covers 5 slots, 4361 covers 10 Slots, 4362 covers 15 Slots $26.00 Black PK-BK *COMPAIBLE WIH ERGO RI RAIL SHOGUN FORENDS #4870, #4865- SHOR, AND #4865 $ PK-BK 5-SLO RAIL COVER, SHOR (3-PACK) PK-BK (BLACK) 10-SLO RAIL COVER, MEDIUM (3-PACK) PK-BK (BLACK) 15-SLO RAIL COVER, LONG (3-PACK) PK-BK (BLACK) ERGO FULL LONG EXURED RAIL COVER GRIPS E RGO Grips Full Long extured Rail Cover Grips are hard polymer with a textured surface to provide an excellent grip while protecting Picatinny rails from damage, or the rails damaging other equipment. Designed to slide on and lock in place. wo per pack. Made out of rigid polymer Length: long Comes two to a pack *COMPAIBLE WIH ERGO RI RAIL SHOGUN FORENDS #4870, #4865- SHOR, AND #4865 $ PK-BK PK-BK PK-DE PK-OD EERGO KEYMOD WEDGELOK SLO COVER GRIPS RGO Grips WedgeLok Slot Cover Grips solidly wedge into KeyMod slots to provide a secure, comfortable grip on handguards or other equipment with KeyMod attachment points. hey are made of a rubber like material and are easily installed or removed without tools. Each WedgeLok Slot Cover Grip uses seven KeyMod slots, but can easily be trimmed to length. heir slim design minimizes bulk. Molded with an aggressive texture, they are heat resistant. ERGO DIAMOND PLAE RAIL COVER GRIPS Clips directly onto Picatinny rails for full rail protection Molded in Santoprene with a distinct diamond plate relief pattern that provides a rubbery grip surface for improved firearm control and feel $ PK-BK 7-Slot KeyMod WedgeLok KeyMod Slot Cover Grip 4 pack Santoprene construction Heat and chemical resistant $21.75 Low profile with aggressive texture Available in Black, Dark Earth, OD Green, Graphite Grey, Robin s Egg Blue, Pink and Purple PK-BK PK-DE PK-OD PK-GG PK-BK *COMPAIBLE WIH #4238-BK MOSSBERG SHOGUN KEYMOD FOREND PK-BK PK-DE PK-OD *COMPAIBLE WIH ERGO RI RAIL SHOGUN FORENDS #4870, #4865- SHOR, AND #4865 Page 38 Calloll Page 39

21 ERGO EZ MOUN (KEYMOD) RIGID SLO RAIL COVERS he EZ Mount Slot Covers are molded from hard polymer and aggressively textured. hese covers provide a durable, easy to grip surface for any handguard with KeyMod attachment points. Each cover uses two KeyMod slots and is 1.5 in length. hey can be mounted in-line for continuous coverage, or placed only where needed. he EZ Mount Slot Covers can be mounted in either direction, and all necessary hardware is included. ERGO M-LOK WEDGELOK SLO COVER GRIP E RGO Grips WedgeLok Slot Cover Grips solidly wedge into M-LOK slots to provide a secure, comfortable grip on handguards with M-LOK slots. hey are made from a rubber like material and are easily installed or removed without tools. Each WedgeLok Slot Cover Grip covers 4 M-LOK slots, but can easily be trimmed to length. heir slim design minimizes bulk. Molded with an aggressive texture, they are heat and chemical resistant. Rigid Polymer EZ Mount Slot Cover Grip 3 Pack Each piece covers two KeyMod slots $ PK-BK *COMPAIBLE WIH #4238-BK MOSSBERG SHOGUN KEYMOD FOREND M-LOK WedgeLok Slot Cover Grip Available in black, Dark Earth, Olive Drab, Graphite Grey, Robin s Egg Blue and Purple Santoprene Construction/Heat Resistant Positive non-slip gripping surface Low profile with aggressive texture 6 1/4 long and 5/8 wide Covers 4 M-LOK slots Patent # 9,441,905B2 $ PK-BK PK-BK PK-DE PK-OD PK-GG ERGO LADDER WIRE LOOM RAIL COVER 5 Slot Rail Cover Quickly and reliably secures switch/optical wires to Picatinny rails, eliminating untimely and disruptive snags Protects rails from damage and protects shooters from rail edges Prevents damage to gear and clothing that contacts rail edges Molded in Santoprene to provide a low profile, rubbery grip surface for improved weapon control Easily trimmed for custom fitting *COMPAIBLE WIH ERGO RI RAIL SHOGUN FORENDS #4870, #4865- SHOR, AND #4865 $ BK 4380-DE ERGO ACICAL LIGH SWICH MOUN KI Firmly attaches first generation Surefire and Insight echnologies pressure switches to Picatinny rails. Each kit includes unique switch holders for each pressure switch type. Molded in Santoprene Switch and light not included *DUAL USE, COMPAIBLE WIH RIFLES AND SHOGUNS 4366K-BK $ K-DE Page 40 Calloll Page 41

22 Handgun grips 1911 Ruger S&W Beretta

23 HANDGUN GRIPS ERGO DELA GRIP he DELA Grip is the first truly ergonomic grip for J Frame revolvers. Designed for the most important part of the gun, the shooter, the DELA Grip was engineered to fit the natural point of aim and mechanics of the human hand, wrist and arm. he result is a grip with a superior natural point of aim, comfort and control. DELA Grip S&W J FRAME Design Patent D Ergonomic design Better natural pointing and aiming extured rubber is over molded a rigid polymer core for a comfortable, secure grip Fits round butt J Frames DELA Grip RUGER LCR / LCR X FRAME -BLACK Same features as the S&W One piece design for a clean look and feel $ SWJ $ RUG-BK ERGO WARRIOR 1911 GRIP W arrior grips are unique in that they combine two different materials and textures for the best possible feel, control and durability. A rubber insert is surrounded by a rigid polymer frame. his gives the shooter a comfortable, very secure grip that is protected from damage. Constructed of rigid polymer frame with soft rubber insert molded in, providing enhanced weapon control even with the interfering presence of moisture and debris Duty and competition proven SureGrip feel on a square bottom design $ BK 4523-BK 4523-DE ERGO X/XO 1911 GRIPS HARD RUBBER X grips are an excellent upgrade to any 1911 pistol. Aggressively textured hard polymer construction provides a positive grip in any situation, and durable for any condition. Heavily textured, minimally abrasive hard rubber design Fits Standard Model 1911 frames hin profile attaches with standard grip screws Designed to accommodate ambidextrous safety options Available in tapered (4511), or square bottom (4510-BK) design for proper fit with mag wells $ BK 4511-BK 4511-DE 4511-OD APERED SQUARE BOOM OFFICERS MODEL BK Page 44 Calloll Page 45

24 ERGO RUGER MKII & MKIII SERIES E RGO grip products are designed to fit the shooter, and the ERGO Ruger grips are no exception. With shapes and contours not found on the stock grips, the ERGO grips offer a comfortable, more consistent grip for better shooting. ERGO E BEREA SERIES RGO grip products are designed to fit the shooter, and the ERGO Beretta grips are no exception. With shapes and contours not found on the stock grips, the ERGO grips offer a comfortable, more consistent grip for better shooting BK $ BK 4580-BL 4580-PK 4580-RD 4540-BK $26.75 Competition tested ambidextrous palm swell provides a more consistent grip Uniquely textured injection molded polymer reduces slippage during active firing Installs with factory screws 4540-BK Competition tested ambidextrous palm swell provides a more consistent grip Uniquely textured injection molded polymer reduces slippage during active firing Installs with factory screws 4540-DE ERGO GRIPIS S elf-adhesive ERGO GRIPIS are applied to any smooth surface of a pistol or rifle where improved grip and weapon control is needed. Size 1 x $5.75 Page 46 Calloll Page 47

25 SHOGUN ACCESSORIES ERGO RI RAIL SHOGUN FORENDS M ade from aluminum, perfectly sized and easy to install, ERGO s ri Rail forends are the quickest and best way to add Picatinny accessory rails to the Remington 870 or Mossberg 500. Each ri Rail comes with three of ERGO Grips Ladder Rail Covers. he other rail covers such as ERGO Grips Slim Lines or Full Rail covers can be used to customize the grip as needed. Constructed of anodized aluminum Includes Black ERGO LowPro Rail Covers REMINGON MOSSBERG 500/590 - SHOR (5-13/16 UBE LENGH) SHOR MOSSBERG 500/590 - SANDARD (6-15/16 UBE LENGH) $ $ SHOR $96.00 Remington 870 Mossberg 500 ERGO KEYMOD RAIL SHOGUN FOREND K eymod forend for Mossberg 500 pump action shotguns. Slim in profile and lightweight, this machined aluminum forend has KeyMod accessory slots on the sides and bottom. Designed for performance and versatility, this upgrade to the venerable Mossberg 500 allows users to mount Picatinny rails or KeyMod accessories only where necessary, eliminating the bulk and weight of snag prone, Picatinny rail sections that are not in use. Machined from aluminum and hard coat anodized matte black. Installation is simple and is the best way for shooters to add the KeyMod accessory attachment system to their Mossberg 500 shotgun. Simply remove the factory forend and replace with the ERGO Grip KeyMod version. Install ERGO Grip s WedgeLok or EZ Mount KeyMod Slot covers for an even more comfortable grip. Keymod forend for Mossberg 500 Keymod rails at 3, 6, and 9 o clock Extremely light-weight and low profile Black anodized Aluminum 6 15/16 length 4238 $ ERGO ACICAL SOCK ADAPERS U se any style AR type collapsible buttstock and pistol grip combination hese stock adapters have the proper drop designed in so factory sights can be used. (Bead, Rifle, and Ghost Ring Sights) Made from glass filled polymer. Includes mounting hardware Remington 870 Mossberg 500 ERGO SHOGUN FOREND REMOVAL OOL 4963 $19.50 he Shotgun Forend Removal ool is designed to help in the removal of the shotguns forend Used for most pump action shotguns All steel construction with black oxide finish 4453-REM 4454-MOSS $39.00 $39.00 Page 48 Calloll Page 49

26 ERGO ACCESSORIES Piece Lower Receiver Spring Kit Includes the following springs: Bolt Catch Spring Disconnector Spring Buffer Retainer Spring rigger Spring Magazine Catch Spring Hammer Spring Selector Spring wo Detent Springs 4960 ERGO AR15 Action Spring $7.00 $8.50 Carbine Length Action Spring for AR-15 and M4 Adjustable Stocks Made to M4A1 Mil-Spec specifications Piece Upper Receiver Spring Kit Includes the following springs: Ejector Spring Forward Assist Spring Port Cover Spring Extractor Spring Extractor Spring Buffer ERGO Carbine Buffer $6.75 $18.50 For use with an A-4 Collapsible Butt Stock such as the ERGO F93 ProStock 4959 ERGO Stock ube Wrench $9.00 Manufactured from heat treated steel Rubberized Grip Performs the job of a: Mil-Spec Castle Nut Wrench Standard Length Receiver Extension Wrench 4821 Low Profile Gas Block $27.00 CNC machined 4140 chromoly steel Nitride/Melonite QPQ finish Chamfered edge, slip on fit USA made steel & machined in the USA Weighs 2oz Fits under most free float handguards Internal Diameter Includes (2) set screws for a secure attachment Accepts standard gas tube roll-pins (roll pin NO included) ERGO Carbine Length Gas ube 4823 $16.50 ERGO Castle Nut Standard mil spec CAR castle nut Made from steel and coated black 4822 Carbine Length gas tube Precision made stainless steel carbine length gas tube Includes roll pin 4971 $5.75 $50.75 Low Profile Adjustable Gas Block CNC machined 4140 chromoly steel Full shutoff with zero adjustment movement Nitride/Melonite QPQ finish Chamfered edge, semi-press fit USA made steel & Machined in the USA Weighs 2oz Fits under most free float handguards Internal Diameter Same profile/height as the standard low-profile gas block Includes (2) set screws for a secure attachment Includes Set-Screw and a 4-40 Retaining Screw (Rearward facing) Accepts standard gas tube roll-pins but, a roll-pin is NO included Page 50 Calloll Page 51

27 ERGO SHOGUN DOUBLE LOOP SLING PLAE Installed between the butt stock and receiver, these adapter plates make it easy to use a sling with a shotgun. Constructed of anodized aluminum For ambidextrous mounting of slings 12 ga. only 4969-MOSS 4972-REM $28.25 $28.25 ERGO Picool 4931 $5.75 he ERGO Pictool is a durable polymer tool useful for removing LowPro rail covers Also can be used for starting take down pins on AR15s Multiple colors, will be shipped random colors ERGO AR Wedge 4988 $3.50 Useful for reducing the amount of movement between the upper and lower receiver on an AR15 Large enough so you can trim to fit ERGO DOUBLE SLING LOOP AR15 ENDPLAE Double Loop Sling Plate 4970 $11.00 Ambi Loop Endplate for AR15s provides the shooter with a loop on both sides of the receiver to mount a single point sling 4930-KEYRING ERGO Keyring Mini Mag Loader/Unloader 4930-KEYRING-BK Low profile key ring magazine loading tool for.22 button mags (Ruger, Hi Standard, Browning Buckmark, etc.) Made in a variety of colors, Color chosen at random PK-YL $4.00 $6.75 $ OR $ PK-OR ERGO Single Point Bungee Sling with Mash Hook Designed to provide maximum weapon maneuverability and retention Integrated bungee minimizes shooter fatigue and increases shooter comfort Includes mash hook for positive sling attachment he ERGO Single Point Bungee Sling is designed to provide maximum weapon maneuverability and retention 4974 $ PK-OR Rifle Shotgun Pistol ERGO Empty Chamber Flags 4985-YL PK-YL Provides immediate visual recognition of an empty chamber on multiple Weapon platforms including semi-auto pistols or shotguns with the shotgun chamber flag Constructed of injection molded polymer Available in high visibility orange and yellow Page 52 Calloll Page 53

28 ERGO ARMORER BLOCK his is one of the most useful maintenance accessories available for an AR rifle. Simply bolt or clamp securely to a bench or other work surface, place an AR rifle onto the block inside the magazine well and the rifle is held in place for cleaning, maintenance or storage. Available for AR-15 and AR-10 style rifles. AR $ piece glass filled polymer design Fits rifles that use SR-25 pattern magazines Weight: 7oz 6-1/8 tall x 2 long (at the base) x 4-1/4 wide (at the base) 1/4 mounting holes Based in Moriarty, New Mexico, ERGO GRIP develops and manufactures small arms accessories for civilian, law enforcement and military use worldwide with the goal to provide all shooters with the finest firearms accessories available. ERGO Grip products are designed for the most important part of the firearm: the shooter. ERGO GRIPS WARRANY POLICY All ERGO GRIP products are made in the U.S.A. to the highest standards. ERGO GRIP products are backed by a limited lifetime warranty. At the discretion of the company, ERGO GRIP will replace or repair any ERGO product should it fail to work due to normal use. Refunds must be handled by the company who sold the product Please contact Customer Service at for assistance. ERGO GRIPS MILIARY & LAW ENFORCEMEN PROGRAM For details, please contact Customer Service at Ordering information Secure Online Ordering: oll Ordering: Ordering: orders@ergogrips.net AR $26.75 Shipping and Handling Information Most U.S. orders to the lower 48 states are shipped via UPS. International/ Overseas orders shipped U.S.P.S. Priority. For special instructions or shipping charges on larger orders, please contact customer service at piece glass filled polymer design Weight: 4.3oz 6 1/8 all X 4 5/16 Long (at the Base) X 2 Wide (at the Base) 1/4 Mounting Holes Notice: Any firearms shown in this catalog are presented for demonstration of product only and are not for sale. Falcon Industries, ERGO, ERGO Grip, ERGO Grip Product, ERGO actical, Ambi, SureGrip, Rhino Hide, Gripit, Pro Stock, ARGO Grip, SWIF GRIP, DELA Grip, SureGrip-A and Gapper are trademarks of Falcon Industries, Inc *INFORMAION AND PRICES IN HIS CAALOG SUBJEC O CHANGE WIHOU NOICE. Page 54 Calloll Page 55

29 N EW FOR 2017 Direct replacement for original butt stock on Mil-Spec tube Made of glass filled nylon Checkered butt for nonslip grip Wide, smooth surface for comfortable cheek weld Please see our website and Facebook page for more info and updates 4014 FLA OP GRIP SureGrip Design allows installation on both.223 and.308 AR type lower receivers Fits modern chassis system stocks commonly made for bolt action rifles A2 sized inner cavity compatible with many accessories available on the market Ergonomically correct finger grooves Overmolded SureGrip material provides non-slip grip and is virtually impervious to oils and solvents Comes with the Gapper Black $24.95, Colors $ Calloll