Aquafax. Plastic Seacocks & Pipe Fittings. Section 3 Contents SECTION 3 1 SECTION 3 CATALOGUE I

Size: px

Start display at page:

Download "Aquafax. Plastic Seacocks & Pipe Fittings. Section 3 Contents SECTION 3 1 SECTION 3 CATALOGUE I"

Damian Sanders
5 years ago
Views:

Aquafax Section Contents Plastic Seacocks & Pipe Fittings

Hose Connectors & Smart Valves 5 Forespar Vented Loops &

Skin Fittings 7 KM Fittings Diverter Valves, Hose Connectors,

General Hose Connectors Five Depots Nationwide Aquafax Limited,

Tel:(0582) 568700 Fax:(0582) 568720 Aquafax Ltd.

Southampton SO 4RF Tel:(02) 80457206 Fax:(02) 80457208 Aquafax

Plymouth PL4 0RU Tel:(0752) 669944 Fax:(0752) 667764 Aquafax Ltd.

Cheshire CW0 0GF Tel:(0606) 84 Fax:(0606) 8488 Aquafax Ltd.

1 Aquafax Section Contents Plastic Seacocks & Pipe Fittings SECTION 2- Forespar Marelon Seacocks & Valves 4 Forespar Marelon Hose Connectors & Smart Valves 5 Forespar Vented Loops & Diverter Y Valves, Marelon Skin Fittings 6 KM Fittings Nylon Skin Fittings 7 KM Fittings Diverter Valves, Hose Connectors, Deck Fillers & Pump Out Fittings 8 Safi Plastic Fittings & General Hose Connectors Five Depots Nationwide Aquafax Limited, 4 Dencora Way, Sundon Business Park, Luton, Beds LU HP Tel:(0582) Fax:(0582) Aquafax Ltd. (Hamble), 2- Mitchell Point, Ensign Business Park, Hamble, Southampton SO 4RF Tel:(02) Fax:(02) Aquafax Ltd. (Plymouth), Unit 5 Plymouth Trade Park, 22 Macadam Road, Plymouth PL4 0RU Tel:(0752) Fax:(0752) Aquafax Ltd. (Middlewich), Unit, Valley Court, Sanderson Way, Middlewich, Cheshire CW0 0GF Tel:(0606) 84 Fax:(0606) 8488 Aquafax Ltd. (Wroxham), Unit Littlewood Lane, Stalham Road Ind. Estate, Hoveton, Norfolk NR2 8DZ Tel:(060) 7888 Fax:(060) 7898 CATALOGUE I SECTION

Forespar Marelon Seacocks Aquafax FORESPAR S MARELON INTEGRATED PLUMBING SYSTEM Reinforced Marelon is a formulation of glass reinforced dupont zytel.

All Marelon integrated valves are sold as a complete system. The assembly consists of thru-hull, valve body and tailpipe barb or female pipe thread end.

All valves have one part number for the complete assembly. Each valve is factory assembled and pressure tested.

REINFORCED PLASTIC SEACOCKS SERIES 9 Special Features Non Corrosive: Long term reliability Compact: Ease of installation Serviceable: Even afloat Easy to operate: Positive action High

range -20 C to +80 C Not affected by bilge cleaners, gas, diesel or oils In case of an emergency; all non-screened thru-hull style valve are supplied with a handle cap/bung that is

Warning - Never leave a boat unattended while bung is in place and valve disassembled. This bung plug is for temporary use only.

Per ABYC/UL requirements, a flat surface approximately the same diameter as the king-nut is needed inside the hull for proper installation. All valves are full port. The I.

Mushroom Illustrated Counter Sunk Illustrated Mushroom Illustrated Counter Sunk Illustrated SEACOCK Mushroom outboard fitting. Part No.

Connection -80 Hose straight -802 Hose straight -80 " Hose straight -804 Hose straight -805 Hose straight -806 2" Hose straight SEACOCK Countersunk outboard fitting. Part No.

2 Forespar Marelon Seacocks Aquafax FORESPAR S MARELON INTEGRATED PLUMBING SYSTEM Reinforced Marelon is a formulation of glass reinforced dupont zytel. Exceeding ABYC recommendations and meeting all UL standards; its unique design provides easy installation in a wide variety of valve configurations. All Marelon integrated valves are sold as a complete system. The assembly consists of thru-hull, valve body and tailpipe barb or female pipe thread end. The thru-hulls use a Buttress style thread for exceptional strength and are not compatible with any other valves. Thru-hulls cannot be sold or used separately. All valves have one part number for the complete assembly. Each valve is factory assembled and pressure tested. Forespar cannot be held responsible for valves disassembled and modified or reassembled improperly. REINFORCED PLASTIC SEACOCKS SERIES 9 Special Features Non Corrosive: Long term reliability Compact: Ease of installation Serviceable: Even afloat Easy to operate: Positive action High impact strength Non conductive Fire resistant: test details available UV Resistant: Temp. range -20 C to +80 C Not affected by bilge cleaners, gas, diesel or oils In case of an emergency; all non-screened thru-hull style valve are supplied with a handle cap/bung that is designed to plug the thru-hull from the outside. This plug can be put in place while vessel is in water. The valve can then be removed from the king-nut and any blockage cleared. Warning - Never leave a boat unattended while bung is in place and valve disassembled. This bung plug is for temporary use only. The bung can also be used during Winter storage to keep debris from collecting inside thru hull. Per ABYC/UL requirements, a flat surface approximately the same diameter as the king-nut is needed inside the hull for proper installation. All valves are full port. The I.D of the hose barb is carried thru the ball so there is no restriction of flow. Dimensions on request. Mushroom Illustrated Counter Sunk Illustrated Mushroom Illustrated Counter Sunk Illustrated SEACOCK Mushroom outboard fitting. Part No. Hose Connection -806 BSP BSP -806 " BSP BSP BSP " BSP SEACOCK Mushroom outboard fitting Part No. Connection -80 Hose straight -802 Hose straight -80 " Hose straight -804 Hose straight -805 Hose straight " Hose straight SEACOCK Countersunk outboard fitting. Part No. Hose Connection -807* BSP -8072* BSP -807* " BSP -8074* BSP -8075* BSP -8076* 2" BSP Countersunk outboard fitting. Part No. Connection -804* Hose straight -8042* Hose straight -804* " Hose straight -8044* Hose straight -8045* Hose straight -8046* 2" Hose straight Mushroom outboard fitting Countersunk outboard fitting. Part No. Connection Part No. Connection -802 Hose r/angle -805* Hose r/angle Hose r/angle -8052* Hose r/angle -802 " Hose r/angle -805* " Hose r/angle Hose r/angle -8054* Hose r/angle Hose r/angle -8055* Hose r/angle " Hose r/angle -8056* 2" Hose r/angle SEACOCK - L Port type with two connectors inboard Mushroom outboard fitting Countersunk outboard fitting. Part No. Connection Part No. Connection Hose -8022* Hose Hose * Hose " Hose -8022* " Hose Hose * Hose Hose * Hose " Hose * 2" Hose 2 SECTION

Aquafax Forespar Marelon Valves & Skin Fittings REINFORCED PLASTIC SEACOCKS & VALVES

a marine environment, they require regular inspection and lubrication.

into the King Nut allowing fitting to Bronze skin fittings and also for hose

MARELON VALVES Designed to meet the needs of builders and owners who require the

BALL VALVES Precision moulded in Marelon with P.T.F.E. seals.

The result was leak free and no evidence of wear on internal seals.

Size 2-808 " BSPF Straight 2-8084 BSPF Straight 2-8085 BSPF Straight 2-8086 2" BSPF

Size -8007* BSP -80072* BSP -8007* " BSP -80074* BSP -80075* BSP - - Part No.

Hose -8009* -80092* -8009* " -80094* -80095* -80096* 2" See Section 2 for Bronze Skin

Thread Body Ø Length OA -8000 76mm 00mm -80002 76mm 00mm -8000 " 2mm 40mm -80004 25mm

On/off only. Diverter valve with positions. FLOWTECH TM PERFORMANCE VALVE Part No.

Hose Size -8024-80242 -8024 " -80244* -80245* -80246* 2" LOCKING HANDLE OPTION

(not supplied) used to positively lock the valve closed. Satisfies USCG requirements.

-806LD TO ORDER ONLY ONLY AVAILABLE TO ORDER FOR "AND 2" SERIES 9 VALVES.

3 Aquafax Forespar Marelon Valves & Skin Fittings REINFORCED PLASTIC SEACOCKS & VALVES VALVE MAINTENANCE All Forespar valves are non-corrosive, but like any moving part in a marine environment, they require regular inspection and lubrication. Actuate the handle and lubricate the seals on a regular schedule using Forespar LanoCote Part No (see page 5). MARELON VALVES WITH BSP STYLE THREADS SPECIAL SERIES 9 SEACOCK Threaded BSP parallel into the King Nut allowing fitting to Bronze skin fittings and also for hose connections. MARELON VALVES Designed to meet the needs of builders and owners who require the benefits of the Marelon integrated plumbing system, with BSP style threads. BALL VALVES Precision moulded in Marelon with P.T.F.E. seals. After,000 operations a valve was submerged in water and pressure tested to 80 P.S.I. The result was leak free and no evidence of wear on internal seals. Threaded BSP parallel. Part No. Size " BSPF Straight BSPF Straight BSPF Straight " BSPF Straight Part No. Size -8007* BSP * BSP -8007* " BSP * BSP * BSP - - Part No. Hose -8008* * -8008* " * * * 2" Part No. Hose -8009* * -8009* " * * * 2" See Section 2 for Bronze Skin Fittings Part No. Thread Body Ø Length OA mm 00mm mm 00mm " 2mm 40mm mm 50mm mm 95mm " 50mm 205mm MARELON VALVES WITH 2 OR HOSE CONNECTIONS On/off only. Diverter valve with positions. FLOWTECH TM PERFORMANCE VALVE Part No. Hose Size -802* -8022* -802* " -8024* * 2" Part No. Hose Size " * * * 2" LOCKING HANDLE OPTION Forespar offers an optional locking plate installed at the factory on any 9 series integrated seacocks. These locking plates allow the handle to be set in the closed position and a padlock (not supplied) used to positively lock the valve closed. Satisfies USCG requirements. For Part No.s add LD i.e. -806LD TO ORDER ONLY ONLY AVAILABLE TO ORDER FOR "AND 2" SERIES 9 VALVES. ASK FOR WRITTEN QUOTATION. Note: Aquafax can supply the padlock (see Section 7). Valve locks are not sold separately and are not a retrofit item. Flowtech TM free flow sea valves incorporate the valve body, thru-hull and the choice of all three sizes of hose pipe connectors all in one set. These high performance valves are available for (9.05mm), " (25.4mm) & (8.mm) hose sizes. The Flowtech TM valve can be faired smooth to the boats outer skin so that when the valve is closed, the internal plunger and valve pipe creates a flush, fair and fast outer surface. Made of Marelon. Part No Valve components are not compatible with any other manufacturers products. SECTION

Forespar Marelon Hose Connectors Aquafax FORESPAR SMART VALVE FORESPAR SMART VALVES The Smart Valve provides the

below and pull up floorboards to make a visual inspection.

Panels are available in 4, 8 or 2 valve combinations and valve identification names engraved on each panel (e.

Forespar Smart Valve Panel 2V 4 Way 2-8090 Forespar Smart Valve Panel 2V 8 Way 2-809 Forespar Smart Valve Panel

Smart Valve Panel 24V 2 Way 2-8097 TO ORDER ONLY Check for Delivery Times Forespar Smart Panels are supplied to

Add an S to indicate smart valve to the end of the part number (e.g -806S).

the touch of a button from the control panel AVAILABLE ON REQUEST - ASK FOR DETAILS & WRITTEN QUOTATION

BSP Hose A B C -8040 5 8" 25 25 57-80402 25 26 6-8040 " " 7 27 75-80404 42 2 8-80405 7 6" 42 2 8-80406 2" 2" 44

The stainless steel strainer basket can be easily removed for cleaning. Ports: BSP. Height: 55mm. Dia. 60mm.

4 Forespar Marelon Hose Connectors Aquafax FORESPAR SMART VALVE FORESPAR SMART VALVES The Smart Valve provides the safety and assurance of a visual display panel showing which seacock is open or closed without having to go below and pull up floorboards to make a visual inspection. Factory installed sensors are mounted on the valve using state of the art sensing technology to monitor the valves handle position. The display panels use red and green LED lights to indicate which valve is open (green LED) or closed (red LED). Panels are available in 4, 8 or 2 valve combinations and valve identification names engraved on each panel (e.g Head intake). Description Part No. Forespar Smart Valve Panel 2V 4 Way Forespar Smart Valve Panel 2V 8 Way Forespar Smart Valve Panel 2V 2 Way Forespar Smart Valve Panel 24V 4 Way Forespar Smart Valve Panel 24V 8 Way Forespar Smart Valve Panel 24V 2 Way TO ORDER ONLY Check for Delivery Times Forespar Smart Panels are supplied to order only as a 2 or 24 Volt kit and should be ordered with Forespar Seacocks. Add an S to indicate smart valve to the end of the part number (e.g -806S). FORESPAR VALVE ROV TM REMOTE OPERATED VALVES Using powerful sealed motors, valves can be opened and closed with the touch of a button from the control panel AVAILABLE ON REQUEST - ASK FOR DETAILS & WRITTEN QUOTATION REINFORCED PLASTIC MARELON FITTINGS 2 HOSE CONNECTORS Part No. BSP Hose A B C " " " " " 2" WATER STRAINERS It features an integral mounting bracket and clear polycarbonate lid for ready inspection. The stainless steel strainer basket can be easily removed for cleaning. Ports: BSP. Height: 55mm. Dia. 60mm. Part No. Description BSP Strainer BSP - " hose connector BSP - hose connector BSP - hose connector BSP - BSP reducing bush ELBOWS Two versions available, male thread/hose, female thread/hose Part No. Item A B C D E " " " " 2" Part No. Item A B C D E " " " " 2" SECTION

Aquafax Forespar Marelon Skin Fittings VENTED LOOPS & DIVERTER Y VALVES VENTED LOOPS Installing a vented loop will ensure that fluids will not siphon from a

The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes

The duckbill one way valve is designed to seal properly if particulate matter is present in fluids. Hose Size Height Width Part No. 5 (.

4mm) 7 (96.6mm) -80755-8075 -80022-8002 LANOCOTE CORROSION CONTROL DIVERTER Y VALVES Forespar Diverter Y Valves and connectors are moulded from Marelon.

where a holding tank is utilised. Hose Size Height Width Depth Part No.

Marelon. Flange mounting. Projection: 60mm. Suitable for up to 80 P.S.I.

No. 5-7779 Spare Vent Cap and Duck Bill Assembly Part No. -80752- Hose Size Part No.

three versions. Precision moulded in high strength glass reinforced Marelon. Makes them suitable for either above or below waterline.

It is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions.

5 Aquafax Forespar Marelon Skin Fittings VENTED LOOPS & DIVERTER Y VALVES VENTED LOOPS Installing a vented loop will ensure that fluids will not siphon from a tank or the sea. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids. Hose Size Height Width Part No. 5 (.4mm) 4 (08mm) " 4 (4.mm) 4" (0.6mm) (4.mm) (95.mm) " 7" (7.8mm) 9" (228.6mm) " 7" (7.8mm) 9" (228.6mm) (.4mm) 7 (96.6mm) LANOCOTE CORROSION CONTROL DIVERTER Y VALVES Forespar Diverter Y Valves and connectors are moulded from Marelon. Y Valves are an essential piece of equipment when the flow of water or other fluids are required to be conveniently diverted, as in marine head application where a holding tank is utilised. Hose Size Height Width Depth Part No. 7 (85mm) 8" (205mm) (89mm) " (92mm) 4" (99mm) (89mm) " (92mm) 8 (26mm) (89mm) (92mm) 4" (05mm) (89mm) Y CONNECTORS Moulded in Marelon. Flange mounting. Projection: 60mm. Suitable for up to 80 P.S.I. Flange Diameter: 89mm Prevents thread freeze-up Prevents electrolysis corrosion Seals porus surfaces Neutralizes acids, alkalies, salts LanoCote 4oz jar Part No Spare Vent Cap and Duck Bill Assembly Part No Hose Size Part No. " They are easily mounted to a bulkhead The valves are operated by a simple 20º movement Positive stops are provided between positions Available in three versions. Precision moulded in high strength glass reinforced Marelon. Makes them suitable for either above or below waterline REINFORCED PLASTIC SKIN FITTINGS LanoCote is the choice of marine professionals for long term corrosion control. It is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions. Formulated to withstand salt water marine conditions, LanoCote is particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery. Applied during assembly, LanoCote will greatly assist in easy dismantling years later. MUSHROOM HEAD Part No. Hose Size " " -8050A 8" " MUSHROOM HEAD BSP Part No. Thread Length " " 2 8" " " " " COUNTERSUNK HEAD BSP Part No. Thread Length " " 2 8" " " DECK DRAINS Flush countersunk head. Made in Marelon & 2". Fitted with integral grate, (*not hose model). Colour: off white Part No. Hose Thread Length * " 8" SECTION 5

KM Plastic Skin Fittings Aquafax KM FITTINGS The KM fittings below

SKIN FITTINGS Straight type for either. Part No.

FITTINGS Long, one size hose tail design.

-85590 BSP SKIN FITTINGS BSP Threaded type. Part No.

-8506 " BSP " -85070 BSP / -85075 BSP ELBOWS BSP female / female

Hose -8570 8" / -857-8580 / " -8582-858 " -8590 / -8595 COCKPIT

6 KM Plastic Skin Fittings Aquafax KM FITTINGS The KM fittings below are moulded in off white Nylon, a strong, stable material unaffected by extreme temperature. These fittings represent high quality at a very competitive price. SKIN FITTINGS Straight type for either. Part No. Thread ID Hose BSP 8" or " BSP or " BSP or SKIN FITTINGS Long, one size hose tail design. Reduces fitting time & errors encountered with dual hose type. Enables two clip fitting. Part No. Thread Hose BSP " BSP " BSP " " BSP 8" BSP SKIN FITTINGS BSP Threaded type. Part No. Thread Length (exc nut) mm -850 " 54mm mm SKIN FITTINGS 90 ELBOWS FOR HOSE 90 Part No. Thread Hose BSP 8" / BSP " BSP / " " BSP " BSP " BSP / BSP ELBOWS BSP female / female Part No. Thread BSP " BSP BSP Part No. Hose " / / " " / COCKPIT DRAIN Countersunk c/w grating, for flush fitting up to 40mm deck. ID hose. O. dia. 68mm. Part No BULKHEAD FITTINGS Supplied as threaded pipe with fixed flange & adjustable back nut. Part No. Thread Length BSP Male 70mm " BSP Male 70mm BSP Male 7mm CONNECTORS Female reducing connector Length 7 8" (22mm) Part No. Thread BSP " BSP BSP " BSP 6 SECTION

Aquafax KM Plastic Skin Fittings -85955-85752 -8592 FUELOCK PLASTIC LOCKABLE DIESEL FILLER CAP With increasing costs of fuel, theft from fuel tanks has increase

May be used with hand or power operated pump, and ideal for bilges or toilet uses. Moulded in PVC bore full (8mm) bore.

Diverter valve only threaded BSP Male -85750 Diverter valve complete with hose connections for ID Hose -85752 Diverter valve complete with hose connections for "

Moulded in nylon and resistant to diesel Cap is slotted for plastic key supplied Cap secured by c/p brass ball chain Bodies and caps available in different colours

Spares Part No Spare Key -85940 White Filler Cap (Water) -8594 Blue Filler Cap (Water) -85942 Red Filler Cap (Diesel) -8594 White Filler Cap (Diesel) -85944 PUMP

Cap is fitted with 5 8" hex, socket for opening with special key supplied. O.A. Dia: (95mm) Deck aperture: 54mm For Hose Part No. -85955 Spare Key Part No.

BSP -8597 " BSP -8597 BSP -85975 Available in BSP and BSP Supplied with multi fixing adaptor flange Size Type Part No.

mechanism BSP DIESEL 2-76696 Marked DIESEL or PETROL ( only) on filler cap for BSS and RCD suitable to fit 2-76720/25/70/7 and 86 deck fillers* *Shown in Section 2

White White Diesel -8590 White Red Diesel -8592 White White Diesel 2" -85920 White Red Diesel 2" -85922 White White Water -859 White Blue Water -859 White White

7 Aquafax KM Plastic Skin Fittings FUELOCK PLASTIC LOCKABLE DIESEL FILLER CAP With increasing costs of fuel, theft from fuel tanks has increase and more boat owners are looking to make fuel tanks secure. KM FITTINGS DIVERTER VALVE Two way valve for liquids and semi solids. May be used with hand or power operated pump, and ideal for bilges or toilet uses. Moulded in PVC bore full (8mm) bore. Supplied either complete with hose connectors fitted (cheaper) or with hose connectors separate to suit application. Description Connectors Part No. Diverter valve only threaded BSP Male Diverter valve complete with hose connections for ID Hose Diverter valve complete with hose connections for " ID Hose Diverter valve complete with hose connections for ID Hose Diverter valve complete with hose connections for ID Hose DECK FILLERS Moulded in nylon and resistant to diesel Cap is slotted for plastic key supplied Cap secured by c/p brass ball chain Bodies and caps available in different colours for fuel or water. O.A. dia. 95mm. Spares Part No Spare Key White Filler Cap (Water) Blue Filler Cap (Water) Red Filler Cap (Diesel) White Filler Cap (Diesel) PUMP OUT FITTING Designed for closed toilet systems and the nozzle from shore pump out stations. Moulded in black nylon and c/w key. Cap is fitted with 5 8" hex, socket for opening with special key supplied. O.A. Dia: (95mm) Deck aperture: 54mm For Hose Part No Spare Key Part No Spare cap black Part No PLASTIC BACKNUTS Hex. shouldered flange Thread Part No. BSP " BSP BSP Available in BSP and BSP Supplied with multi fixing adaptor flange Size Type Part No. fitting a wide range of existing deck fillers & two keys BSP PETROL Self-closing lock cover keeping the BSP DIESEL elements out of the locking mechanism BSP DIESEL Marked DIESEL or PETROL ( only) on filler cap for BSS and RCD suitable to fit /25/70/7 and 86 deck fillers* *Shown in Section 2 Size: Dia. approx 4 (20mm) Projection: 4 5 8" (7mm) Outlets: BSP male Three hole fixing All spares available Body Cap Legend Hose Part No. White White Diesel White Red Diesel White White Diesel 2" White Red Diesel 2" White White Water -859 White Blue Water -859 White White Water 2" White Blue Water 2" HOSE CONNECTORS BSP Male or female thread. Available as single or dual hose types, or join them to make connectors for different size hoses Thread Hose Part No. BSP (Male) 8" / Hose BSP (Male) Hose -852 " BSP (Male) / " Hose " BSP (Male) Hose " BSP (Male) " Hose -852 BSP (Male) / Hose BSP (Male) Hose Thread Hose Part No. BSP (Female) / " Hose BSP (Female) / Hose BSP (Female) Hose BSP (Female) " Hose -850 BSP (Female) Hose & as a hose joiner SECTION 7

BSP Hose Mat -86200 8" 8" GRPP -8620 GRPP -8628 GRPP -86220 GRPP -8620 " " GRPP -86240 GRPP -86246 " GRPP SAFI PLASTIC

-8602 9mm 48mm -86022 05mm 60mm -8602 " 7mm 70mm HOSE CONNECTORS Male BSP Parallel thread.

BSP Hose Mat -86248 GRPP -86250 GRPP -86257 2" GRPP -86258 2" GRPP -86260 2" 2" GRPP -86280 " " GRPP HOSE CONNECTORS SAFI

complete with E.P. gasket & large black nut. Part No. BSP Length O.A.

hose. Sizes up to are moulded in polypropylene and the larger ones in nylon. ELBOWS Equal ends Hose Part No.

8" 9-69080 9-6908 9-69082 " 9-6908 9-69084 9-69085 2" 9-69086 - 8" 9-69087 TEE Equal ends Y CONNECTOR Hose Part No.

9-69222 " 9-6909 9-69094 9-69095 2" 9-69096 90º PLASTIC SWEPT BEND Designed for domestic systems Inexpensive smooth bore

Hose 9-9694 Hose* 9-9695 * Ideal for toilets and sanitation hose NPT HOSE CONNECTORS PLASTIC UNEQUAL HOSE CONNECTOR ( -

Hose increments are: mm, 6mm, 9mm, 22mm, 25mm, 28mm, 2mm and 8mm. Part No. 9-96979 Thread Hose Part No.

8 Plastic Fittings and Hose Connectors Aquafax P.V.C. BALL CHECK VALVE EPDM Seals SIngle union Threaded BSP parallel Not suitable for diesel Part No. BSP Hose Mat " 8" GRPP GRPP GRPP GRPP " " GRPP GRPP " GRPP SAFI PLASTIC FITTINGS Part No. BSP Length O.Dia mm 48mm mm 60mm " 7mm 70mm HOSE CONNECTORS Male BSP Parallel thread. SAFI UPVC & GRPP BALL VALVES AVAILABLE TO ORDER Part No. BSP Hose Mat GRPP GRPP " GRPP " GRPP " 2" GRPP " " GRPP HOSE CONNECTORS SAFI BULKHEAD FITTINGS Heavy duty fittings moulded in black glass reinforced polypropylene. Threaded BSP complete with E.P. gasket & large black nut. Part No. BSP Length O.A mm * mm -86 " 05mm mm mm " 05mm *TO ORDER ONLY The fittings below have barbed ends for hose. Sizes up to are moulded in polypropylene and the larger ones in nylon. ELBOWS Equal ends Hose Part No. 8" " " STRAIGHT CONNECTORS Hose Part No. 8" " " " TEE Equal ends Y CONNECTOR Hose Part No. Hose Part No. 8" " Y Conn Y Conn Y Conn " " º PLASTIC SWEPT BEND Designed for domestic systems Inexpensive smooth bore fittings Non-barbed Hose Part No. Hose Hose* * Ideal for toilets and sanitation hose NPT HOSE CONNECTORS PLASTIC UNEQUAL HOSE CONNECTOR ( - 8mm Hose) The connector is stepped and can be cut to join many hose sizes. Hose increments are: mm, 6mm, 9mm, 22mm, 25mm, 28mm, 2mm and 8mm. Part No Thread Hose Part No. NPT(M) -950 NPT(M) NPT(M) NPT(M) NPT(M) " " NPT(M) " NPT(M) " -950 NPT(M) " NPT(M) NPT(M) " NPT(M) " NPT(M) 2" UPVC COMPACT BALL VALVES Strong, with slim, simple design Open/close by 90 handle rotation P.T.F.E. seats and EPDM seals BSP parallel sockets Nominal pressure 0 bar at 20 C AVAILABLE TO ORDER Part No. BSP A B D H L " " " Other Safi UPVC & GRPP ball valves are available to order. Full range and technical details available on request. 8 SECTION For more information on these and other products see our website:

TruDesign Aquavalve (Y Valve)

TruDesign Aquavalve (Y Valve) Legislation in many countries dictates the use of holding tanks near shore, or in defined areas. By installing a diverting valve (Y Valve), the user has the choice to divert