PC1000 OPERATION MANUAL SPARE PARTS LIST

Transcription

1 PC000 OPERATION MANUAL SPARE PARTS LIST MM POLYCHEM CORPORATION 677 HEISLEY ROAD, MENTOR, OHIO 060 PHONE: , FA:

2 CONTENTS PART I General Safety Instructions... A. Basic Operation... A. Basic Safety Precautions... A.3 Safety Instructions Governing Specific Operational Phases... A. Warning of Electrical Dangers... A3.5 Grounding Instructions Shall Include the Following... A3.6 Before Operating... A.7 During Operation... A.8 After Operating... A.9 Signs and Symbols... A5 Machine Information... A6. Areas of Application... A6. Environment Information... A6.3 Storage... A7. Machine Description... A7.5 Safety Devices... A8

3 .6 Technical Specification... A9 3 Preparation Before Operating the Machine...A 3. Shipping...A 3. Transportation & Centre of Gravity...A 3.3 Construction Layout... A 3. Installation... A3 3.5 Operation Space... A 3.6 Operating Elements... A5 3.7 Instructions for Loading PP Strap... A7 3.8 Auto Strap Feeding Process... A9. Operating the Machine... A. Soft Tension Operation... A. High Tension Operation... A.3 Function Encoder... A 5. Adjustments... A3 5. Strap Amount in the Accumulator Box... A3 5. Adjustment for Feeding Pressure to the Accumulator Box... A 5.3 Adjustment for Heater Temperature... A5 5. Some adjustments for straps... A5 5.5 Adjustment for Feeding/Reversing Pressure... A7

4 5.6 Adjustment on Tensioning Rollers for High Tension... A9 6. Troubleshooting... A30 6. LCD Display... A30 7. Maintenance... A3 PART II. Wiring Diagram..B PART III. Strapping Head Unit... C. Bandway Unit...C3 3. Accumulator Unit.C63. Reel Control Group..C85 5. Body Frame Unit..C95 6. Electric Control Unit...C33

5 PART I

6 General Safety Instructions. Basic Operation Read the operation and safety manual prior to using the strapping machine. The operation and safety manual should remain attached to the machine at all times. The machine may only be operated in accordance with its designated use. The strapping machine was built in accordance with state-of-the-art standards and recognized safety rules. Nevertheless, improper use can still result in injury to personnel or damage to the machine and other material property. Machine shall only be operated by trained personnel. Perform inspections and maintenance at regular intervals. Refer to the Maintenance section of the manual. The machine may not be put in operation before checking the respective devices. Safety devices must never be bridged or eliminated by any means. To transport the equipment only use lifting apparatus and loading devices with sufficient capacity. Always disconnect from external power supply when changing the location of the machine, even if the location should only be slightly changed. Connect power supply properly before returning to service. Do not alter or bypass protective interlocks. Do not alter circuits and machine unless authorized to do so by the manufacturer.. Basic Safety Precautions In addition to the instructions for operation, the user is to be instructed in all generally applicable legal or mandatory regulations relevant to safety or the environment. Long hair, loose-fitting garments, or jewelry can be a safety hazard. These items must be secured prior to equipment operation. Use protective equipment whenever appropriate or when required by law. Carefully observe all safety instructions and warnings attached to the machine. Keep safety labels clean and legible. People that are being trained to operate or service the equipment must be supervised by experienced personnel. Any electrical work performed on the equipment must be conducted by a skilled electrician or under the supervision of a skilled electrician. All work must be observed good electrical engineering practice and follow safety rules and local wiring standards. -A-

7 .3 Safety Instructions Governing Specific Operational Phases Avoid unsafe operation of the equipment. The machine is only to be operated when it is in good running order. Only operate the equipment in a safe manner; all protective and safety devices must be in place and fully functional. This includes removable safety devices, emergency shut-off equipment, noise-protection devices and exhaust fans. The machine is to be checked for damage and defects at least once each work shift. Any changes, including the working behavior of the machine, are to be reported immediately. If necessary, the machine is to be stopped and locked-out immediately. In case of a malfunction, the strapping machine is to be immediately stopped and locked-out until the fault has been eliminated. Before starting the strapping machine, make sure that the area is clear and safe. Do not place any tools or parts onto the machine. Operating personnel needs to be well trained before executing special operations and maintenance work; this work needs to be done with the proper supervision. Always check and tighten connections after maintenance or repair. After completing maintenance or repair, all safety devices must be replaced and checked for functionality before operating the equipment. To minimize the environmental impact, all consumables and replaced parts must be disposed of safely. Before starting the machine, check that the accessories have been stowed away safely. Avoid operating the machine in a fashion that could upset its stability. -A-

8 . Warning of Electrical Dangers Immediately remove power to the machine in case of trouble in the electrical system. Replace a fuse with one with the same style and ratings; pay particular attention to matching the specified current. Any electrical work performed on the equipment must be conducted by a skilled electrician or under the supervision of a skilled electrician. All work must be observed good electrical engineering practice and follow safety rules and local wiring standards. Inspect the electrical equipment of the machine at regular intervals. Tighten any loose connections. Check wiring for scorch marks; replace scorched wiring and determine and correct the reason for the overheating. When working on live equipment, ensure that a second person is available to cut power in case of an emergency. When appropriate, secure the working area with safety tape and a warning sign. Use insulated tools for electrical work. Before working on high-voltage assemblies, turn off the power supply. Carefully discharge the supply cable and short-circuit any energy-storage components such as capacitors. If the equipment was moved, carefully refit and refasten all parts removed for transport before reapplying power. Before moving the machine, remember to disconnect the power cable..5 Grounding Instructions Shall Include the Following This product must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock. This product is equipped with a cord that has a grounding wire and an appropriate grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances. If repair or replacement of the cord or plug is necessary, connect the ground wire to the ground terminal of the plug. The wire with green insulation (with or without yellow stripes) is the grounding wire. Check with a qualified electrician or service person if the grounding instructions are not clear or if in doubt about the proper grounding of the machine. Do not modify the plug provided; if it will not fit the power outlet, have the proper outlet installed by a qualified electrician. DANGER! Improper installation of the grounding can result in electrocution. -A3-

9 .6 Before Operating Read the instruction manual before operating the machine for your safety. Wear eye protection and safety gloves before operating this machine. Eye protection must be worn Safety gloves must be worn Verify that the power line voltage is correct. The machine must be properly grounded to avoid a shock hazard. All wiring must be in accordance with local wiring standards. The strapping machine can only be operated with polypropylene (PP) strapping; do not use polyester (PET) strapping or polyethylene (PE) cord strap..7 During Operation The weight of the package cannot exceed 0kg (88 lbs), but it may be necessary to use lifting aids for handling products that exceed 5kg (55 lbs). The size of the package should not be less than 70 mm 0 mm (.75 inches 0.75 inches). While running, check the unit for any unusual sounds or smoke emissions. Keep away from the inside of the arch while the machine is operating; do not put your hands or body into the arch when the machine is running. NOTE: it is normal for the heater tongue to smoke during the sealing operation..8 After Operating Remove dust and dirt from the unit; pay particular attention to the interior of the arch. Turn off the power when the machine is not in use. -A-

10 .9 Signs and Symbols Symbol Meaning Warning for dangerous voltage! Contact with live electrical parts will result in severe injury or death. Warning for hot surface! Welding area is approximately 70 o C(50 o F) Allow sufficient time for the heater to cool down before any work in welding area. Warning for danger! Do not put your hands or body into arch working area when machine is operating. -A5-

11 Machine Information. Areas of Application The strapping machine is to be used for strapping packages, cartons, paper boxes, newspapers, magazines and those materials using a polypropylene (PP) strapping for stabilizing purposes when in transportation. Be careful for rigidity of working materials, and don t try to pack agri-foodstuffs or other such material. This machine was designed for certain applications only. We strongly recommend that this machine NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to its application DO NOT use the machine until you have had detail instruction from your dealer.. Environment Information The strapping machine shall be installed in the following conditions: Supply voltage: nominal supply voltage Source frequency: nominal frequency Ambient temperature: 5 C - 0 C ( -0 ). Altitude: shall be at altitudes up to 000m above mean sea level. Relative humidity: not exceed 50% at 0 C. Atmosphere: Free from excessive dust, acid fume, corrosive gases and salt. Avoid exposing to abnormal vibration. Don't use machine in dangerous environment. Don't use machines in damp or wet locations, or expose them to rain. Please provide a suitable illumination around the machine for safety operation. Work place of user should have a fire extinguisher or other devices that meet their local safety regulations, and always be careful. Internal parts requiring frequent inspection and adjustment, and maintenance areas must be provided with a suitable illumination around the machine. If there may be harmful gases, fumes or dust generated during heating, user or system integrator must install exhaust system for the extraction of harmful substances. The exhaust system shall be positioned according to the vent location. Please refer to the figure. -A6-

12 And the user should refer to a professional expert or relevant authority to prevent the dangerous substance/ gas emitted by suitable means according to local /national environmental/health codes/regulations..3 Storage The store room must be dry Do not expose the machine to extreme cold or heat environment Place the machine on an even floor in order to avoid any distortion. Machine Description Automatic strapping machine for polypropylene (PP) strapping material. Strap width mm. Electronic heater temperature control. Hinged front table. Automatic strap loop ejection in case of strapping cycle without package. Extra tough construction. Simple, safe and user-friendly operation. Automatic strap feeding system. Automatic strap end detection. Mobile, with large table area and high capacity strap reel Table surface made of stainless steel. Strap tension adjustable from soft to extremely high. -A7-

13 .5 Safety Devices Danger! Operate the machine only when all safety devices are at their place and are functioning correctly. The machine has been constructed in accordance with the applicable legal regulations. The machine is reliable in operation. Nevertheless the machine may constitute a danger if it is operated in improper or undue condition. Danger points that cannot be avoided due to equipment design are equipped with safety devices. If necessary, these points are marked on the machine with warning signs, and in the manual under working safety instructions. The machine is equipped with the following safety devices:. Warning signs at the danger points of the machine. Automatic shunt down of machine when front table opening 3. Live parts are secured by cover -A8-

14 If it is necessary to make adjustments inside the machine during operation, after a strap jam for example, the rear table top can be unscrewed. Observe caution as the machine is still fully functional with the covers removed. When the front table top is opened, safety switch B6- is activated. This will remove power but the heating element will keeping heating. CAUTION! The heating unit operates at a very high temperature in order to melt the PP strapping. To prevent burns, avoid contact with this area..6 Technical Specification.6. Electrical Specification System configuration: L+N+PE (Ground) L+N+PE (Ground) Nominal power: 0.5kW 0.5kW Rated current: 3A 5A Rated voltage: 0V/30V/0V 0V Rated frequency: 50Hz 60Hz Type of current AC - single phase AC - single phase -A9-

15 .6. Technical Data Strap width mm Strap thickness 0.5mm up to 0.65mm ( ) Coil diameter 00mm (8 nominal) Strap coil diameter Outside diameter 0mm (6.5 ) Width(Face) 90mm (7.5 ) Table height Minimum 80mm (3.3 ) Maximum 90mm (36. ) Weight 67 kg (368 lbs) Noise emission 78 dba Ambient temp 5-0 ( - 0 ) Minimum package size: 70mm W 0mm H (.75 W 0.75 H) arch size minus 50mm (.97 ) Maximum package size: E: arch size: 650W 500H Max. package size: 600mm W 50mm H (3.6 W 7.7 H) -A0-

16 3 Preparation Before Operating the Machine 3. Shipping The equipment is delivered in transport units. Each transport unit is loaded onto a wooden pallet, secured by polyester strapping. 3. Transportation & Centre of Gravity Transport the strapping machine on a pallet. Lift the unit using forklift truck or other lifting device. Proper packaging requires that the casters rest in a recess. Cover the machine with a sturdy box for protection. Secure the unit to the pallet with plastic strapping. Place the strapping across the top plates. Use cardboard to avoid marring. Use plastic strapping to hold the cover to the pallet. The machine can be removed from the pallet using forklift truck or other lifting device. CAUTION! Do not carry machine by having the forklift s fork under the arch, but only under the machine frame. Center-of-gravity position -A-

17 Danger to Lift! Suspend loads can fall down. By inappropriate mounting or fracture of hoisting device the load can fall down and cause serious injuries or death. Do not step under suspended loads! Use appropriate hoisting devices and fasteners. 3.3 Construction Layout. Arch. Upper Table Front 3. Adjustment Leg. Reel 5. Foot Bar (Front) 6. Caster (Brake) 7. Reel Brake Release 8. Caster (Free) 9. Foot Pedal (Option) 0. Control Panel. Power Cord. Strapping Head Unit 3. Main Motor M. Feed Motor M 5. Tension Motor M3 -A-

18 6. Strap Accumulator Motor M 7. Automatic Feed Motor M5 8. Proximity Sensor SQ 9. Proximity Sensor SQ 0. Proximity Sensor SQ3. Fan (M). Heater 3. Photo Eye (Option). Timer Box (Option) 5. Foot Bar (Rear)(Option) 3. Installation. Remove the packing material and check that the machine is complete and without any shipping damage.. Installation of Arch Unit a. Unpack the Arch Unit from the pallet. b. Open the Upper Table Front and take out the package of spare parts from the machine inside. These spare parts are listed as below. c. Loosen the fixing bolt (about -3 turns) of Upper Table Rear and then remove it (pull it up and then remove it backward). d. Loosen M Spring on M7--30 Slide Table Frame and then move M Slide Table backward. e. Install the Arch Unit to the fixing position and then have 9 sets of spare parts Item D (HBS066+SW06+PW06A) install in both sides of the Arch Unit, Strap Guide(R) and Strap Guide (L); hand tied them. -A3-

19 Package of spare parts ITEM Description Q ty Step M T7--00 (Guide) HBS0308N + SW03 HBS066N + SW06+PW06A HBS0630N + PW06A + T PW06A + SW06 + HN06 HBS060N + SW06 + PW06A (For arch size W850mm) PMS036 + SW03 (For SQ6) (OPTION) FMS0508N HBS0508N + SW05 + PW05 (For 850W / 050W / 650W) HBS060HN + PW06B + T (For 50W / 650W) pc pcs sets sets sets sets or set sets pcs sets sets Step 5 Step Step 8 Step 3 Fig. B Step & 8 -A3--

20 Step 9 Step 6 Step Fig. C Step 0 Fig. D For 050W/650W Fig. E For 50W/650W Fig. F f. Make sure the Arch Unit is vertical (90 0 ) to the machine frame and then fix 6 sets of Item D (HBS066+SW06+PW06A) which are on both sides of Arch Unit. g. Adjust the position of Guide LH and Guide RH close to the Strap track. The clearance should be smaller than 0.5mm. When the width of arch is 050W/650W, it s necessary to have Item I parts help to fix Guide LH. (refer to fig. E) When the width of arch is 50W/650W, it s necessary to have Item J parts help to fix Guide LH & Guide RH. (refer to fig. F) h. Hook the M Spring back to M7--30Slide Table Frame (refer to fig. B) and fix M Eject Plate (L) with correct direction (refer to fig. B). Be sure the Slide Table can move freely after fixing it. -A3--

21 i. Use Item H parts to fix Control panel onto the right upper side of the Arch Unit. j. Use Item E parts to connect the M Plate on the left and T Arm together. (refer to fig. D step 0) k. Fix T7--00 Guide. It can be only a little bit touched with the M Left Bar or M Right Bar. l. Connect the Power Cord to the terminal under the Upper Table Front. m. The installation of Arch unit is done. Turn on the machine for following testing. n. If this machine is with SQ6 option (check chute home position sensor), fix the SQ6 and make adjustment to have SQ6 is activated before the chute is mm away from the home position. If the clearance is too big, it might cause feeding failure; while if the clearance is too small, SQ6 might not able to be activated well. (when testing SQ6, the power should be on so that the led on the SQ6 could be activated.) o. If the width of arch is 50mm, it s necessary to install Connecting Rod Group (M ) with Item F parts. (refer to fig. H); if the width of arch is 850mm or 050mm, it s necessary to install Connecting Rod Group (M ) with set of Item F parts. (refer to fig. I) p. Put back the Upper Table Rear and close the Upper Table Front. Done. Step Item H Fig. G -A3-3-

22 Step 5 Fig. H Item F Fig. I Item F 3. Adjust the table height by repositioning the screws underneath the machine frame (refer to below drawing). After adjustments, be sure to tighten all the fixing screws. Caution! Be sure to take out the wire for the proximity switch underneath the left side of machine to avoid any damage before adjusting the table height. -A3--

23 . After positioning the machine ready for working, be sure to lock two front casters (with brake) to avoid machine s movements. 5. When moving the machine, be sure to un-lock the two lockable casters. Re-lock the two casters after re-positioning the machine. 6. Do not move the machine unless it s necessary. Before movement, be sure to turn off the power, unplug it, put the power cord on the machine and un-lock the front two lockable casters. 7. Minimum Requirements to the Electrical Supply The electrical supply cord for the machine must have a minimum cross-section of at least.0 mm (6 AWG). The maximum power line fuse must not exceed 6 Amp. -A3-5-

24 3.5 Operation Space Keep the area (A) and (B) free for the operator. The area (A) is necessary for operation strapping machine. The area (B) is necessary for changing the strap or adjusting strap amount in the accumulator. B -A-

25 3.6 Operating Elements. Main Power Switch: Provides the machine with power. Switch to position for turning the main power on. After strapping, switch it to 0 to turn off the machine.. LCD Display: Display strapping message. 3. Soft - High Tension Switch: Switch to right for High strapping tension. Switch to left for soft strapping tension.. Strap Tension Potentiometer: Turn clockwise to increase strapping tension; turn counter-clockwise to reduce strapping tension. This potentiometer is only functional under High tension mode) Function Encoder: Turn clockwise or counterclockwise to change strapping settings. Also! It offers settings for weld cooling time and photo eye timers (expressed in page A). Other settings can only be changed by technicians with password. 6. Start Switch: When the machine is ready for working, and after turning on Main Power Switch, you must push the Start switch for activating other controls. To initiate a strapping cycle. To clear up machine fault.(reset) -A5-

26 7. Reel Release Switch: To release the dispenser for easily taking out strapping from it. 8. Foot Bar : To initiate a strapping cycle. To clear up machine fault. (reset) 9. Foot Pedal Switch (Option): To initiate a strapping cycle. To clear up machine fault. (reset) 0. Photo Eye Switch (Option) The purpose of the photo-eye switch is to automatically initiate strapping cycles when a package is detected. The controls for the photo-eye are shown in the figure below. Function 0 Timer Timer Function The photo-eye is disabled. The strapping cycle must be initiated with Start switch on the control panel or Foot bar switch and optional foot pedal. A single strapping cycle: initiates a cycle when a package covers the photo-eye. Delay time for initiating the cycle is controlled by TIMER. Multiple strapping cycles: initiates a cycle when a package covers the photo-eye. Cycling continuously until the photo-eye no longer sees a package. The cycle timing is determined by TIMER and TIMER. Sets the delay time from the moment that a package is detected until the st strapping cycle initiates. This allows an operator to properly position a package for the first strap. It is adjustable from zero to five seconds. It s the delay time (interval) between strap cycles. When multiple strapping cycles are needed, this timer is for an operator to determine the interval between each straps. It is adjustable from zero to five seconds. -A6-

27 . Foot Bar (Rear)(Option): To initiate a strapping cycle. To clear up machine fault. (reset) 3.7 Instructions for Loading PP Strap 3.7. Specifications Polypropylene Strap Width: mm Thickness: mm Strap which has excessive camber as illustrated in figure below cannot be used. Height of 5mm (0. ) or above (78.7 ) -A7-

28 3.7. Strap Reel Installation. Release the Reel Nut Handle by pressing and turning it to the left.. Take out the Outer Flange. 3. Install a new strap coil onto the drum according to the instructions on the reel.. Put Outer Flange back and the Reel Nut Handle. Turning the Reel Nut Handle to the right to lock it. 5. Remove the protective straps (B) and the stickers (A) Note: The Reel Nut Handle is released by turning to the left. Tighten it by pressing and turning it to the right. -A8-

29 3.8 Auto Strap Feeding Process. Turn Main Power Switch on the control panel to the right (at position), and press Start Switch. (refer to Fig. a). Press Reel Release Switch A (as shown in Fig. a) and pull out around 60cm strap. (refer to Fig. b) 3. Thread the strap through the Guide Roller B following to the direction showing in Fig. c.. Insert the strap to outlet C (refer to Fig. d). 5. Keep threading until the tip of the strap reaches the Accumulator Main Roller. 6. Lift the lever D and insert strap between the rollers E. Feed strap for around -3cm ahead the rollers. (refer to Fig. e) Fig. a. 60cm B Fig. b. Fig. c. -A9-

30 C E Fig. d. Fig. e. B Caution: If strap is fed more than 6cm ahead the rollers, it could make Auto Strap Feeding failed. 7. Press Start Switch. Machine will complete the Auto Strap Feeding in 5 sec. and have the strap feeding to the sealing point. Caution! In the process of Auto Strap Feeding, only the Start Switch is functional. Neither Foot bar switch nor foot pedal switch will function. Caution! The cut edge of the strap must be free from burrs to avoid failure in Auto Strap Feeding. -A0-

31 . Operating the Machine After switching on the strapping machine, heater starts to warm up and LCD display continues to be on until the heater reaches its operating temperature (about minutes). Caution! Machine will not operate until heater reaches to operating temperature. The heater fans continue to run until heater reaches operating temperature. Switch Main Power Switch to Position Heater warms up and LCD display keeps on lightening Ready! LCD display is off. Soft Tension Operation. Place a package in the middle of table beneath the chute.. Push start switch or actuate foot bar switch or foot pedal switch (option) to start strapping. NOTE! When operating in soft tension mode, the strap tension potentiometer does not function.. High Tension Operation. Place a package in the middle of table beneath the chute.. Properly adjust the strap tension potentiometer according to various package. 3. Push start switch or actuate foot bar switch or foot pedal switch (option) to start strapping. Attention! Keep hands away from the strapping area. If hands are caught by P.P. strap accidentally, be sure to turn off the Main Power Switch first and then cut the strap. -A-

32 .3 Function Encoder LCD display will show various timers such as cooling time, timer, timer etc. After pressing the function encoder for over seconds, turn the knob to choose the timer needed to be changed. Press this knob to confirm the timer needed altered and turn it again to alter the value, and then press it again to confirm this alteration. T5: cooling time timer, Range 0-0.6S T: see A6 timer T: see A6 timer T: Press bar delay time, Range 0-3S PH> 0: Photo eye control box no function (Disable) : Photo eye control box has function (Enable) PH-N> 0: only one strap cycle when PH is activated. : continuous strap cycles when PH is activated and cycle will stop until the package leaves. SQ6> 0: sensor for chute home position no function (Disable) : sensor for chute home position has function (Enable) Press>0: Press device no function (Disable) (for TP-70P only) Ready Press encoder over S <- Timer TEC <- <- T5: <- T5: <- T5 : Select Timer and press encoder Turn encoder right Turn encoder right, select the timer needs to be altered and press encoder Turn encoder to change the value Then press encoder Turn encoder left to <- and press encoder to exit setting <- Timer TEC Ready Turn encoder left to <- and press encoder to exit setting Finish setting -A-

33 5. Adjustments 5. Strap Amount in the Accumulator Box The machine has been already well set for storing enough amount of strap in accumulator Box. However, some adjustments may be required, depending on the actual quality or thickness of the strap used. The strap supply in the accumulator box should be sufficient for about -5 strapping cycle. (It depends on the package size and the arch size. arch or bigger package.) Fewer cycles are available for bigger Caution! Excessive amount of strap in the Accumulator Box can lead to the strap jam (too curved) and cause feeding problem. Insufficient amount of strap in the Accumulator Box can lead to short feed problem or decrease strapping speed. The adjusting mechanism for amount of strap is inside the machine, at the rear side of machine. In case that there is an insufficient amount of strap in the Accumulator Box, loosen the Nut A and turn the Screw Bolt B counterclockwise. After adjustments, be sure to tighten the Nut A to avoid unstable strap accumulation. In case that there is an excessive amount of strap in the Accumulator Box, loosen the Nut A and turn the Screw Bolt B clockwise. After adjustments, be sure to tighten the Nut A to avoid unstable strap accumulation. B -A3-

34 5. Adjustment for Feeding Pressure to the Accumulator Box The machine has been already well set for enough feeding pressure offering enough strength for pulling strap from strap coil to accumulator box. It might be necessary for some adjustments to increase feeding pressure if you are using smooth strap. When it s necessary for increasing the feeding pressure, please loosen the Nut A and turn Nut C upwards to increase the strength of Spring B. Be sure to tighten Nut A by turning it counterclockwise after adjustments. B M Motor C Caution! Too much feeding pressure could lead to feeding problem as the strap would be scraped by the rollers easily. Insufficient feeding pressure would lead to short feed problem as the strap is insufficient in the accumulator box. Thickness of strap -A-

35 5.3 Adjustment for Heater Temperature The machine has been already well set for proper heater temperature. It might be necessary to do some adjustments according to temperature in working environment, and the quality of PP strap to ensure better sealing efficiency. Turn A clockwise to increase the heater temperature and turn it counterclockwise to decrease the heater temperature. 5. Some adjustments for straps. Adjusting Strap Guide Adjusting the A (Strap Guide) according to the strap and make sure the width B is around 0.5mm (0.0 ) wider than the strap. Caution: If B is too wide, it would lead to sealing problem. would lead to feeding problem. However, if it s too narrow, it -A5-

36 . Adjusting Right Strap Guide Loosen the screws on the Right Strap Guide and take it out. Then loosen the screws B (HBS008N) and adjust A according to the strap. Be sure D is about 0.mm wider than the strap. After adjustment, tighten screws B and put the Right Strap Guide back. HBS008N Caution: M If D is too wide, it would lead to sealing problem. would lead to feeding problem. However, if it s too narrow, it 3. Adjusting Brush Clearance in the Arch The brush clearance in the left side and upper left should be about the strap width. The brush clearance in the upper right should be about -3mm narrower to the strap. The brush clearance in upper side of right chute should be the same to the clearance in right side of upper arch. The brush clearance in the lower right should be -5mm narrower to the strap. Brush clearance Note: The brush clearance could be various according to different package size. The brush clearance needs to be bigger for not having any effect on reversing especially when the package size is close to the arch size. -A6-

37 . Adjusting Strap Amount in the Accumulator Box Different strap widths might have effects on the strap amount in the accumulator box. Please do the adjustment according to 5. if necessary. 5.5 Adjustment for Feeding/Reversing Pressure The upper table rear was screwed by captive screws. To take it out, please loosening the captive screws about 5mm first and then lift the end side of rear side up and slide it out. -A7-

38 . Adjusting the Pressure for Feeding The machine is already well set for proper feeding pressure. However, according to different strap characteristics (such as smoother surface or different thickness), some adjustments for feeding pressure are still necessary. If short feed problem happens a lot, and it is a result of improper feeding pressure, please do the following adjustments: Loosen Nut B and turn Nut A clockwise to increase the feeding pressure. Nut A and turn Nut B counterclockwise to decrease the feeding pressure. adjustments, be sure to tighten these Nuts well. Or loosen After B. Adjusting the Pressure for Reversing The machine is already well set for proper reversing pressure. However, according to different strap characteristics (such as smoother surface or different thickness), some adjustments for reversing pressure are still necessary. If machine often has incomplete reversing problem, and it is a result of improper reversing pressure, please do the following adjustments: Take out the part (TA-073 Spring Hook) from C position to B or A position in order to increase the reversing pressure. B C -A8-

39 5.6 Adjustment on Tensioning Rollers for High Tension The machine is already well set for proper pressure for high tension. However, according to different strap characteristics (such as smoother surface or different thickness), some adjustments on pressure for high tension might be necessary. When insufficient strapping tension occurs even the Soft-High tension switch is on high position and it is a result of pressure for high tension, please turn Nut D clockwise. This can solve the problem of insufficient strapping tension at high tension and strap slipping between A & B due to this. Note: When the pressure for high tension is set too high, the tension for strapping would get lower. B -A9-

40 6. Troubleshooting 6. LCD Display When the machine has a malfunction, the LCD will flash and display a failure message. Message shown on the LCD could be as follows:. Reminder message: a. Push Start: Please press the Start Switch to make machine function. This is especially necessary after the Safety Switch is released or after you just turn on the machine. b. Load Strap: Load a new roll of strap or re-do the Auto Strap feeding again. c. B6 open; K open: When it shows this message after you press the Start Switch, it means the Safety Switch might not be closed or the K in the control box is abnormal.. Malfunction from switches: a. S Error: This means the Start Switch or the Foot Pedal is continuously triggered before activating them. Please check if any of these Switches is defective. b. S5 Error: This means the Reel Release Switch is continuously triggered before activating it. Try to press it by hand to see if it s defective. c. SQ on Error: The SQ is triggered when doing Auto Strap Feeding. Check if the SQ or the Switch lever is defective. d. SQ9 failure: Foot bar is not able to function properly and cause it not able to go back to home position. 3. Malfunction from procedures: a. ASF failed: Auto Strap Feeding failed. It might be caused by wrong inserting direction or inserting strap too much. Please re-do the Auto Strap Feeding. b. Feed jam: Resulting from not being able to feed strap to the sealing position. When Feed jam occurs, solve it by pressing the Start Switch or Foot bar. If this does not solve the problem, please take out the jammed strap by following steps: -A30-

41 b-. Open Upper Table Front Ass'y M b-. Lift up the Lever (M7--000/M7--00) with left hand and take out the Cover (M7--30) for the Upper Guide with right hand at the same time. b-3. Take out the jammed strap and cut it. b-. Put the cover (M7--30) for the Upper Guide back to its position and put the Upper Table Front Ass'y back as well. Push START switch in the control panel to RESTART machine. If this does not solve the problem, the following causes have to be checked as well: Fault Cause Remedy Strap is too curved Change strap Insufficient feeding pressure Adjust feeding pressure according to. Feed jam 5.5 Too much strap amount in the Adjust to proper strap amount in the accumulator box and has accumulator box according to 5. caused strap to be curved Other malfunctions. Sealing failure. Insufficient strap tension Too much debris on both sides Clean both sides of the heater plate by of heater plate fine sandpaper Increase the heater temperature Insufficient heater temperature according to 5.3 Insufficient cooling time Increase cooling time according to.3 Soft-High tension switch is at soft position Turn it to high position Lubricant drops into tension roller incautious Clean the lubricant Too much debris in the gear of tension roller Clean the debris -A3-

42 7. Maintenance Warning: Before any maintenance or repairs on the machine, set the Main Power Switch to "O" (OFF). Wait about 5 minutes for cooling down the heater to avoid burns with this area.. Cleaning and Lubrication The high reliability and long service life of the strapping machine will depend on regular cleaning and maintenance. ATTENTION! All the important strap transport components, such as the drive rollers and the strap guides, must be kept free from oil and grease. (lubricant) The lubricant has to be non-resinous. The lubricant is SAE 30. Maintenance Only use original spare parts supplied by manufacturer. Daily: Use air gun to clean the circled positions (nearby the cutters, strap guide and accumulating feeding rollers) daily Remove plastic residue in the machine. Air Air Air -A3-

43 Air Weekly: Lubricate (front bar, press bar and rear bar) and shafts in arch weekly. Please refer to the following mesh areas for instruction. Before lubricating, be sure to clean the parts first to avoid mixing oil and debris which might have a bad effect on machine s function. Test strapping with several bundles, paying attention to audible and visible failures and check for correct function. Monthly :( or 00,000 strapping cycles) Clean both sides of heater plate and polish with fine sandpaper if necessary ATTENTION: Make sure the welding plate is cool first!! Check supporting and cam rollers of seal head for easy movement. The pressure plate must be moved back to home position automatically by the spring tension. Be sure to clean any debris in the tension roller -A33-

44 6 Months:(or 500,000 strapping cycles) Check heating element, replace and re-adjust it if necessary. Check strap cutter in sealing head, replace it if necessary. Check if the connector at wiring housing to printed circuit board is firmly fixed. Check if the safety switch on front table or right door functions well. Make machine ready for operation. Strap one bundle manually several times, paying attention to mal-functions, repeat procedure. Initiating several cyclings with package manually for testing and pay attention to any mal-functions. Make sure the strap accumulating function is well. If necessary, replace the assistant rollers, do proper adjustments to accumulating feeding pressure or to the clearance in the reel brake. Slightly lubricate the sealing head (bearing points) with light lubricant if necessary. year :( or,000,000 strapping) Replace deflection roller if it shows visible changes. In case of loud noise at bearings: locate them, replace the bearings. Get machine ready for operation again, strap one bundle manually several times, paying attention to malfunctions. -A3-

45

46 PART II

47 . Wiring Diagram PC000-mm -B-

48 -B- PC000-mm

49 -B3- PC000-mm

50 -B- PC000-mm

51 -B5- PC000-mm

52 -B6- PC000-mm

53 -B7- PC000-mm

54 -B8- PC000-mm

55 -B9- PC000-mm

56 -B0- PC000-mm

57 -B- PC000-mm

58 PART III

59 STRAPPING HEAD UNIT M Cl- -C-

60 STRAPPING HEAD UNIT M REF. NO. PART NO. DESCRIPTION Q'TY M Cam Group (SEE PG. C3) M Bar Guide Group (SEE PG. C9) M Feed Group (SEE PG. C7) M Tension Group (SEE PG. C37) -C-

61 - CAM GROUP M C3-

62 - CAM GROUP M REF. NO. PART NO. DESCRIPTION Q'TY M Strapping Head Frame M Guide M Ejector Plate (L) 9500 M Ejector Plate (R) M Shaft 6 M Collar 7 M Cover M Sensor Base 9 M Coupling 0 M Spring 97 M Gear Box and Cam Ass'y SEE PAGE C7 M M Motor Ass'y SEE PAGE C9 3 M Slide Table Frame Ass'y (SEE PG. C) 9637 M Heater Arm Ass'y SEE PAGE C3 5 M Exhaust Fan Ass'y (SEE PG. C5) T Block Ass'y SEE PAGE C7 30 H-7 Washer TA-089 Spring Hook T Bumper T Bumper Bracket 3 T Return Spring LA-000 Label 38 MB55 Metal Bushing, SP05 Spring Pin, 5 3 HBS0308N HBS, M3 8 (N) 997 HBS056N HBS, M5 6 (N) HBS055HN HBS, M5 5 (H)(N) 6 HBS060HN HBS, M6 0 (H)(N) 3 7 HBS065HN HBS, M6 5 (H)(N) 8 HBS060N HBS, M6 0 (N) HBS080HN HBS, M8 0 (H)(N) 50 HBS0865HN HBS, M8 65 (H)(N) 5 HSS0506GN HSS, M5 6 (G)(N) HSS060GN HSS, M6 0 (G)(N) HN08 HN, M THS0508N THS, M5 8 (N) C-

63 - CAM GROUP M REF. NO. 6 SW03 PART NO. DESCRIPTION Q'TY SW, M3 SW, M3 (Option) SW, M5 6 SW05 63 SW06 SW, M6 3 6 SW08 SW, M8 65 PW03 PW, M3 (Option) 66 PW05 PW, M5 67 PW06C PW, M6 (C) HB060 HB, M6 0 7 PMS030 PMS, M3 0 PMS, M3 0 (Option) C5-

64 -C6-

65 -- GEAR BO AND CAM ASS'Y M C7-

66 -- GEAR BO AND CAM ASS'Y M REF. NO. PART NO. DESCRIPTION Q'TY M7--00 M7--00 M M7--00 M M M7--70 Retracting Cam Tension Cam Heater Cam Front Bar Cam Press Bar Cam Rear Bar Cam Slide Table Cam 9 M Support 0 M7--00 Cam Shaft M7--00 Position Cam M7--0 Arch Cam 6 M Gear Box TB-3 Washer T7--0 Handle 6 BR6003ZZ Bearing, 6003ZZ 30 KYA000 Key, 0 3 KYA Key, KYA05050 Key, CAP06 CAP, M6 39 HBS066N HBS, M6 6 (N) 0 HBS065N HBS, M6 5 (N) HSS0505GN HSS, M5 5 (G)(N) 3 HSS0606GN HSS, M6 6 (G)(N) 9 6 SW06 SW, M HB066 HB, M C8-

67 -- M MOTOR ASS'Y M C9-

68 -- M MOTOR ASS'Y M REF. PART NO. DESCRIPTION Q'TY NO. M7--00 Gear Box Support M7--00 M Motor 9535 HBS050N HBS, M5 0 (N) SW05 SW, M KYC00 Key, 0 -C0-

69 --3 SLIDE TABLE FRAME ASS'Y M C-

70 --3 SLIDE TABLE FRAME ASS'Y M REF. NO. PART NO. DESCRIPTION Q'TY M7--30 M M M M M M S M Slide Table Frame Shaft Switch Lever Sensor Plate Spring Base Slide Table Slide Table (Stainless Steel Model)(Option) Spring Hook T7--00 Spring T Washer 6 BR60ZZ Bearing, 60ZZ 8 ER0 Snap Ring, E- 9 MB0508 Metal Bushing, MB55 Metal Bushing, 55 HB06 HB, M HBS0306N HBS, M3 6 (N) 8 HBS05N HBS, M5 (N) 9 HBS066N HBS, M6 6 (N) HN06 HN, M6 96 SW03 SW, M3 SW05 SW, M5 3 SW06 SW, M PW06C PW, M6 (C) 956 -C-

71 -- HEATER ARM ASS'Y M C3-

72 -- HEATER ARM ASS'Y M REF. NO. PART NO. DESCRIPTION Q'TY M7--00 M7--00 Heater Crank Heater Shaft 9885 M7--00S Heater Shaft (Stainless Steel Model)(Option) 3 M Heater Bracket M7--300S M7--00 M WA Heater Bracket (Stainless Steel Model)(Option) Terminal Bracket Isolator Washer (Ø5.5 Ø 8 t=3) M Heater Set TA-073 Spring Hook TB-5 Spring 3 T5--5 Heater Terminal 5 Heater-Insulation 6 T7-- Heater-Insulation 3 BR636ZZ Bearing, 636ZZ MB55 Metal Bushing, HBS0N HBS, M (N) 3 HBS05N HBS, M5 (N) 3 HBS0530N HBS, M5 30 (N) 35 HBS060N HBS, M6 0 (N) 36 HBS050HN HBS, M5 0 (H)(N) 38 PMS030 PMS, M3 0 HN0S HN, M (SUS) HN05 HN, M SW05 SW, M5 8 SW06 SW, M6 5 PW0 PW, M 5 PW05 PW, M5 53 PW06A PW, M6 (A) 5 PW06C PW, M6 (C) C-

73 --5 EHAUST FAN ASS'Y M C5-

74 --5 EHAUST FAN ASS'Y M REF. PART NO. DESCRIPTION Q'TY NO. M Fan Bracket 6 T Fan 7 T Fan Cover TMS0 TMS, M 3 HBS00N HBS, M 0 (N) 6 SW0 SW, M 6 PW0 PW, M HN0 HN, M 960 -C6-

75 --6 BLOCKASS'Y T C7-

76 --6 BLOCK ASS'Y T REF. PART NO. DESCRIPTION Q'TY NO. T Block 6 BR635ZZ Bearing, 635ZZ SP056 Spring Pin, C8-

77 - BAR GUIDE GROUP M C9-

78 - BAR GUIDE GROUP M REF. NO. PART NO. DESCRIPTION Q'TY M Bar Guide M M7--000S M M EN M M7--000EN Bar Guide Lid Bar Guide Lid (Stainless Steel Model)(Option) Cutter Holder Cutter Holder (Stainless Steel Model)(Option) Strap Guide Strap Guide (Stainless Steel Model)(Option) M M7--000S M M S M M S Front Bar Ass'y Front Bar Ass'y (Stainless Steel Model)(Option) Press Bar Ass'y Press Bar Ass'y (Stainless Steel Model)(Option) Rear Bar Ass'y Rear Bar Ass'y (Stainless Steel Model)(Option) (SEE PG.C) (SEE PAGE C3) (SEE PAGE C5) TA-07 Return Spring T Spring Hook 975 HBS0308N HBS, M3 8 (N) HBS050N HBS, M5 0 (N) HBS066N HBS, M6 6 (N) 95 HBS060N HBS, M6 0 (N) HBS0650HN HBS, M6 50 (H)(N) SW05 SW, M SW06 SW, M HN05 HN, M C0-

79 -- FRONT BAR ASS'Y M C-

80 -- FRONT BAR ASS'Y M REF. NO. PART NO. DESCRIPTION Q'TY M M7--000S Front Bar Ass'y Front Bar Ass'y (Stainless Steel Model)(Option) M7--0 Front Bar 960 M7--0S Front Bar (Stainless Steel Model)(Option) 6 TA-073 Spring Hook 7 TA-078 Spring 8 T7--3 Plunger BRNART6VR Bearing, NART6VR 3 SP038 Spring Pin, 3 8 SP066 Spring Pin, C-

81 -- PRESS BAR ASS'Y M C3-

82 -- PRESS BAR ASS'Y M REF. NO. PART NO. DESCRIPTION Q'TY M M S M7--00 M7--00S Press Bar Ass'y Press Bar Ass'y (Stainless Steel Model)(Option) Press Bar Press Bar (Stainless Steel Model)(Option) TA-073 Spring Hook 7 TA-078 Spring 8 T7--3 Plunger BRNART6VR Bearing, NART6VR 3 SP038 Spring Pin, 3 8 SP066 Spring Pin, C-

83 --3 REAR BAR ASS'Y M C5-

84 --3 REAR BAR ASS'Y M REF. NO. PART NO. DESCRIPTION Q'TY M M S M M7--300S Rear Bar Ass'y Rear Bar Ass'y (Stainless Steel Model)(Option) Rear Bar Rear Bar (Stainless Steel Model)(Option) TA-073 Spring Hook 7 TA-078 Spring 8 T7--3 Plunger BRNART6VR Bearing, NART6VR 3 SP038 Spring Pin, 3 8 SP066 Spring Pin, C6-

85 -3 FEED GROUP M C7-

86 -3 FEED GROUP M REF. NO. PART NO. DESCRIPTION Q'TY 3 M Bearing Housing 98 M Guide Wheel 98 8 M Feeding Motor (M) Set 9537 M M7--300S Upper Guide Ass'y Upper Guide Ass'y (Stainless Steel Model) (Option) Assistant Roller Ass'y (SEE PG. C9) 979 (SEE PG. C3) 980 M M Feeding Arm Ass'y (SEE PG. C33) M Retracting Arm Ass'y (SEE PG. C35) 8 BR600ZZ Bearing, 600ZZ 8778 KYA005 Key, HBS0N HBS, M (N) HBS05N HBS, M5 (N) HBS056N HBS, M5 6 (N) HBS06N HBS, M6 (N) TMS0508 TMS, M5 8 3 SW0 SW, M 35 SW05 SW, M SW06 SW, M PW0 PW, M PW05 PW, M PW06A PW, M6 (A) 96 PW06C PW, M6 (C) 956 -C8-

87 -3- UPPER GUIDE ASS'Y M C9-

88 -3- UPPER GUIDE ASS'Y M REF. NO. 3 PART NO. DESCRIPTION Q'TY M M7--300S Upper Guide Ass'y Upper Guide Ass'y (Stainless Steel Model) (Option) 979 M7--3 M7--3EN M7--3 M7--3EN M M S Upper Guide Upper Guide (Stainless Steel Model)(Option) Cover Cover (Stainless Steel Model)(Option) Bolt Bolt (Stainless Steel Model)(Option) H-090 Spring MB0505 Metal Bushing, NTE05 NTE, M PW05 PW, M C30-

89 -3- ASSISTANT ROLLER ASS'Y M / -C3-

90 -3- ASSISTANT ROLLER ASS'Y M REF. NO. PART NO. DESCRIPTION Q'TY M7--30 M7--30EN Assistant Roller Bracket Assistant Roller Bracket (Stainless Steel Model)(Option) Shaft M M Assistant Roller Base M7--30 Assistant Roller 5 M SQ8 Sensor Base 6 M Spacer BR686ZZ Bearing, 686ZZ 3 HBS0.5N HBS, M.5 (N) HBS05N HBS, M5 (N) 6 HBS05N HBS, M 5 (N) 7 HBS060N HBS, M6 0 (N) 9 SW0.5 SW, M.5 0 SW0 SW, M SW05 SW, M PW05 PW, M HN0.5 HN, M.5 -C3-

91 -3-3 FEEDING ARM ASS'Y M C33-

92 -3-3 FEEDING ARM ASS'Y M REF. NO. PART NO. DESCRIPTION Q'TY 3 5 M M M M M Feeding Arm Linkage Shaft Collar Spring Hook T Return Spring 988 BR690ZZ Bearing, 690ZZ HBS066N HBS, M6 6 (N) 8 HBS060N HBS, M6 0 (N) PMS00 PMS, M HN0 HN, M 7 HN06 HN, M SW0 SW, M 3 SW06 SW, M PW06C PW, M6 (C) 956 -C3-

93 -3- RETRACTING ARM ASS'Y M \ I -C35-

94 -3- RETRACTING ARM ASS'Y M REF. NO. PART NO. DESCRIPTION Q'TY M M Retracting Arm Shaft 6 TA-073 Spring Hook 977 BR635ZZ Bearing, 635ZZ MB05 Metal Bushing, 05 7 HBS056N HBS, M5 6 (N) 9700 HB06 HB, M SW05 SW, M5 5 SW06 SW, M PW05 PW, M5 30 PW06B PW, M6 (B) C36-

95 - TENSION GROUP M C37-

96 - TENSION GROUP M REF. NO. PART NO. DESCRIPTION Q'TY M7--00 Tension Guide Wheel 9885 M7--00S Tension Guide Wheel (Stainless Steel Model) (Option) M7--00 Guide 985 M7--00EN Guide (Stainless Steel Model)(Option) 3 M Tension Guide 9857 M7--030EN Tension Guide (Stainless Steel Model)(Option) M Shaft M Bracket M Gear M M3 Motor 957 M Tension Crank Ass'y (SEE PG. C39) M7--00 Tension Arm Ass'y (SEE PG. C) 6 TB-3 Washer 7 AD--08 Washer 98 KYA05057 Key, HBS0N HBS, M (N) HBS056N HBS, M5 6 (N) HBS060HN HBS, M6 0 (H)(N) HB06 HB, M HSS0506GN HSS, M5 6 (G)(N) SW0 SW, M 35 SW05 SW, M SW06 SW, M PW06C PW, M6 (C) 956 -C38-

97 -- TENSION CRANK ASS'Y M C39-

98 -- TENSION CRANK ASS'Y M REF. NO. PART NO. DESCRIPTION Q'TY 3 M7--0 M7--0S M7--0 M7--0EN M Assistant Roller Assistant Roller (Stainless Steel Model) (Option) Assistant Roller Housing Assistant Roller Housing (Stainless Steel Model)(Option) Shaft M7--00 Tension Crank 0369 BR6900ZZ Bearing, 6900ZZ BR690ZZ Bearing, 690ZZ HBS06N HBS, M6 (N) 8 HBS0630N HBS, M6 30 (N) 9 HBS060N HBS, M6 0 (N) SW06 SW, M PW06A PW, M6 (A) 7 TB-3 Washer 96 3 HN06 HN, M6 36 SR08 Stop Ring, S C0-

99 -- TENSION ARM ASS'Y M C-

100 -- TENSION ARM ASS'Y M7--00 REF. NO. PART NO. DESCRIPTION Q'TY M7--0 M7--00 Tension Arm Shaft M7--00 Spring Support 5 M7--50 Spring 6 M Nut 7 M Collar 8 M Connecting Rod (Upper) 9 M Connecting Rod (Lower) 0 M Connecting Rod Set TB-3 Washer BRCF8 Bearing, CF8 7 BR690ZZ Bearing, 690ZZ 8 HB06 HB, M6 FLG06 FLG, M SW06 SW, M6 5 SW08 SW, M PW06A PW, M6 (A) 96 3 HN08 HN, M C-

101 BANDWAY UNIT M C3-

102 BANDWAY UNIT M REF. NO. PART NO. DESCRIPTION Q'TY M Bandway Unit M S Bandway Unit (Stainless Steel Model) M Arch Group (SEE PG. C5) M S Arch Group (Stainless Steel Model) M Bandway Group (SEE PG.C9) M7--000S Bandway Group (Stainless Steel Model) 3 M Arch Cover Group (SEE PG. C55) M S Arch Cover Group (Stainless Steel Model) M Connecting Rod Group (For 850W/050W) (SEE PG. C6-) M Connecting Rod Group (For 50W/650W) (SEE PG. C63) -C-

103 - ARCH GROUP M C5-

104 - ARCH GROUP M REF. NO. PART NO. DESCRIPTION Q'TY M Arch Group M S Arch Group (Stainless Steel Model) 3 M Rod (For 650W) M Rod (For 850W) M Rod (For 050/50W) M Rod (For 650W) M Lever (For 650W) M7--00 Lever (For 850W~650W) 5 M Plate (For 00H~800H) M Plate (For 000H) 6 M Left Bar (For 00H) M Left Bar (For 500H) M Left Bar (For 600H) M Left Bar (For 800H/000H) 7 M Right Bar (For 00H) M Right Bar (For 500H) M Right Bar (For 600H) M Right Bar (For 800H/000H) 8 M Collar 9 TB-3 Washer (For 00H/500H) Washer (For 600H) 6 Washer (For 800H/000H) 8 T7--00 Bushing T7--00 Guide (For 00H~800H) T Guide (For 000H) 3 T7--0 Connecting Rod (For 650W) T7--0 Connecting Rod (For 850W) T7--03 Connecting Rod (For 050W) T7--0 Connecting Rod (For 50W) T7--06 Connecting Rod (For 650W) T Connector 7 T Spacer (For 00H/500H) Spacer (For 600H) 6 Spacer (For 800H/000H) 8 9 T Arm T Tube 6 3 WT6305 Thrust Washer (For 00H/500H) Thrust Washer (For 600H) 6 Thrust Washer (For 800H/000H) 8 35 BRCF8 Bearing, CF8 36 BRNAST6 Bearing, Nast6 (For 850W~650W) C6-

105 - ARCH GROUP M REF. NO. PART NO. DESCRIPTION Q'TY 38 MB0806 Metal Bushing, KYA05050 Key, HBS056N HBS, M5 6 (N) HBS056S HBS, M5 6 (Stainless Steel Model) 9 HBS066N HBS, M6 6 (N)(For 00H~000H) 50 HBS060N HBS, M6 0 (N) 5 HBS0630N HBS, M6 30 (N) 5 5 HBS0830N HBS, M8 30 (N) 56 THS06N THS, M6 (N)(Only 000H) THS06S THS, M6 (Stainless Steel Model)(Only 000H) 57 THS065N THS, M6 5 (N)(For 850W~650W) 58 THS0630N THS, M6 30 (N)(For 00H/500H) THS, M6 30 (N)(For 600H) 6 THS, M6 30 (N)(For 800H/000H) 8 THS0630S THS, M6 30 (Stainless Steel Model) (For 00H/500H) THS, M6 30 (Stainless Steel Model) 6 (For 600H) THS, M6 30 (Stainless Steel Model) 8 (For 800H/000H) 6 HN06 HN, M6 (For 00H/500H) HN, M6 (For 600H) 6 HN, M6 (For 800H/000H) 8 6 HSS0506GN HSS, M5 6 (G)(N) 63 HSS0608GN HSS, M6 8 (G)(N) SW05 SW05S SW, M5 SW, M5 (Stainless Steel Model) SW06 SW, M6 7~ SW08 SW, M PW06A PW, M6 (A)(For 650W) 9 PW, M6 (A)(For 850W~650W) 96 -C7-

106 -C8-

107 - BANDWAY GROUP M C9-

108 - BANDWAY GROUP M REF. NO. PART NO. DESCRIPTION Q'TY M Bandway Group M7--000S Bandway Group (Stainless Steel Model) 3 M Cover (L) M7--030S Cover (L)(Stainless Steel Model)(Option) M Adjusting Plate 95 M7--000EN Adjusting Plate (Stainless Steel Model)(Option) 5 M Cover (R) M7--050S Cover (R)(Stainless Steel Model)(Option) 6 M Plate (For 650W~050W) 9735 Plate (For 50W/650W) 5 8 M Bumper Screw (For 850W~650W) ~ 956 M7--00 Strap Track Frame Ass'y (SEE PG. C5) M7--00S Strap Track Frame Ass'y (Stainless Steel Model) 7 T7--00 Pin (For 650W~050W) Pin (For 50W/650W) 5 T7--00S Pin (Stainless Steel Model)(For 650W~050W) (Option) Pin (Stainless Steel Model) 5 (For 50W/650W)(Option) 8 T Tube FMS00 FMS, M 0 FMS00S FMS, M 0 (Stainless Steel Model) HBS008N HBS, M 8 (N) 9787 HBS008S HBS, M 8 (Stainless Steel Model) 5 HBS066N HBS, M6 6 (N) HBS06N HBS, M6 (N)(For 50W/650W) THS066N THS, M6 6 (N) 95 THS066S THS, M6 6 (Stainless Steel Model) NTE03 NTE, M3 (For 650W~050W) NTE, M3 (For 50W/650W) 0 3 SW0 SW, M 35 SW06 SW, M6 (For 650W) SW, M6 (For 850W~650W) 6~5 36 SW06S SW, M6 (Stainless Steel Model) PW06A PW, M6 (A) PW06AS PW, M6 (A)(Stainless Steel Model) PW06C PW, M6 (C)(For 650W~050W) PW, M6 (C)(For 50W/650W) 8 PW06CS PW, M6 (C)(Stainless Steel Model) HN06 HN, M6 (For 850W~650W) ~ 96 -C50-

109

110 -- STRAP TRACK FRAME ASS'Y M7--00 REF. NO. PART NO. DESCRIPTION Q'TY M7--00 M7--00S Strap Track Frame Ass'y Strap Track Frame Ass'y (Stainless Steel Model) M7--0 Strap Track M7--0 Strap Track Frame M7--0S Strap Track Frame (Stainless Steel Model) 3 M7--0 Corner Strap Track M7--0 Strap Track (Left)(For 650W) M7--0 Strap Track (Left)(For 850W) M7--30 Strap Track (Left)(For 050W) M7--0 Strap Track (Left)(For 50W) M7--50 Strap Track (Left)(For 650W) M M7--060S Track Frame Connector Track Frame Connector (Stainless Steel Model) T T7--060S T7--07 T7--07S T T T7--07 T7--07S Shaft (For 650W~050W) Shaft (For 50W/650W) Shaft (Stainless Steel Model) (For 650W~050W)(Option) Shaft (Stainless Steel Model) (For 50W/650W)(Option) Spring Spring (Stainless Steel Model)(Option) Bracket Washer (cp5 ӽ)(for 650W~050W) Washer (cp5 ӽ)(for 50W/650W) Spring (For 50W/650W) Spring (Stainless Steel Model) (For 50W/650W)(Option) BR608ZZ Bearing, 608ZZ 0 BRPB8 Bearing, PB8 (For 650W~050W) Bearing, PB8 (For 50W/650W) MB086 Metal Bushing, 086 (For 650W~050W) Metal Bushing, 086 (For 50W/650W) HBL05 HBL, M5 9 FMS00 FMS, M 0 30 FMS05 FMS, M C5-

111 -- STRAP TRACK FRAME ASS'Y M7--00 REF. PART NO. DESCRIPTION Q'TY NO. 33 HBS0N HBS, M (N)(For 650W~050W) 7 HBS, M (N)(For 50W/650W) 8 3 HBS06N HBS, M6 (N) 8 35 HBS050N HBS, M5 0 (N)(Without SQ6 Option) 38 TMS008 TMS, M 8 (For 650W~050W) TMS, M 8 (For 50W/650W) SR08 Stop Ring, S-8 3 HN0 HN, M 6 HN05 HN, M5 (Without SQ6 Option) SW0 SW05 SW06 SW, M (For 650W~050W) SW, M (For 50W/650W) SW, M5 SW, M5 (Without SQ6 Option) SW, M PW0 PW06C PW, M (For 650W~050W) PW, M (For 50W/650W) PW, M6 (C) 8 53 PW05 PW, M5 (Without SQ6 Option) C53-

112 -C5-

113

114 -3 ARCH COVER GROUP M REF. NO. PART NO. DESCRIPTION Q'TY M Arch Cover Group M S M M7--300S M7--30 M7--30S M7--30 M7--30S M M7--303S M7--30 M7--30S FR FR M T M7--00 M7--00S 7 8 Arch Cover Group (Stainless Steel Model) Arch Cover RH (For 00H) Arch Cover RH (Stainless Steel Model) (For 00H) Arch Cover RH (For 500H) Arch Cover RH (Stainless Steel Model) (For 500H) Arch Cover RH (For 600H) Arch Cover RH (Stainless Steel Model) (For 600H) Arch Cover RH (For 800H) Arch Cover RH (Stainless Steel Model) (For 800H) Arch Cover RH (For 000H) Arch Cover RH (Stainless Steel Model) (For 000H) Foam Rubber Foam Rubber Block Ass'y (For 650W~050W) Grommet Guide LH (For 650W) Guide LH (Stainless Steel Model)(For 650W) M Guide LH (For 850W) M7--060S Guide LH (Stainless Steel Model)(For 850W) M Guide LH (For 050W) M7--070S Guide LH (Stainless Steel Model)(For 050W) M7--00 Guide LH (For 50W) M7--00S Guide LH (Stainless Steel Model)(For 50W) M Guide LH (For 650W) M7--050S M7--00 M7--00S Guide LH (Stainless Steel Model)(For 650W) Guide RH (For 650W) Guide RH (Stainless Steel Model)(For 650W) M7--00 Guide RH (For 850W/050W) M7--00S M M7--030S M M S Guide RH (Stainless Steel Model) (For 850W/050W) Guide RH (For 50W/650W) Guide RH (Stainless Steel Model) (For 50W/650W) Cover Cover (Stainless Steel Model) 0 T Support Rod (For 50W/650W) (SEE PG. C6) C56-

115 -3 ARCH COVER GROUP M REF. NO. PART NO. DESCRIPTION Q'TY M M S Arch Cover LH (For 00H) Arch Cover LH (Stainless Steel Model) (For 00H) Arch Cover LH (For 500H) 3 M M7--300S M M7--300S M M S M M7--300S M M S M M S M M S M M S M M S Arch Cover LH (Stainless Steel Model) (For 500H) Arch Cover LH (For 600H) Arch Cover LH (Stainless Steel Model) (For 600H) Arch Cover LH (For 800H) Arch Cover LH (Stainless Steel Model) (For 800H) Arch Cover LH (For 000H) Arch Cover LH (Stainless Steel Model) (For 000H) Arch Cover (Upper)(For 650W) Arch Cover (Upper)(Stainless Steel Model) (For 650W) Arch Cover (Upper)(For 850W) Arch Cover (Upper)(Stainless Steel Model) (For 850W) Arch Cover (Upper)(For 050W) Arch Cover (Upper)(Stainless Steel Model) (For 050W) Arch Cover (Upper)(For 50W) Arch Cover (Upper)(Stainless Steel Model) (For 50W) Arch Cover (Upper)(For 650W) T7-5- T7-5- Arch Cover (Upper)(Stainless Steel Model) (For 650W) Brush (Side)(For 00H) Brush (Side)(For 500H) T7-5-3 Brush (Side)(For 600H) T7-5- Brush (Side)(For 800H) T7-5-5 T7-5-5 T7-5-5 Brush (Side)(For 000H) Brush (Upper)(For 650W) Brush (Upper)(For 850W) T Brush (Upper)(For 050W) T7-5-5 Brush (Upper)(For 50W) 5 6 T M M S M Brush (Upper)(For 650W) Arch Arch (Stainless Steel Model) Block (For 850W~650W) 7 LA-070 Label -C57-

116 -3 ARCH COVER GROUP M REF. NO. PART NO. DESCRIPTION Q'TY LA-0005 HBS0N HBS0508N HBS0508S Label HBS, M (N)(For 650W~050W) HBS05N HBS05S HBS066N HBS060HN HBS066S TTP0BN TTP0BS THS0508N THS0508S HBS, M5 8 (N)(For 050W/650W) HBS, M5 8 (Stainless Steel Model) (For 050W/650W) HBS, M5 (N) HBS, M5 (Stainless Steel Model) HBS, M6 6 (N)(For 650W~050W) HBS, M6 6 (N)(For 50W/650W) HBS, M6 0 (H)(N)(For 850W/050W) HBS, M6 0 (H)(N)(For 50W/650W) HBS, M6 6 (Stainless Steel Model) (For 650W~050W) TTP, M (B)(N)(For 650W~050W) TTP, M (B)(N)(For 50W/650W) TTP, M (B)(Stainless Steel Model) (For 650W~050W) TTP, M (B)(Stainless Steel Model) (For 50W/650W) THS, M5 8 (N) THS, M5 8 (Stainless Steel Model) TMS006 TMS006S PMS036 TMS, M 6 TMS, M 6 (Stainless Steel Model) PMS, M3 6 (Option) SW03 SW, M3 (Option) 33 SW05 3 SW05S SW, M5 (For 650W/850W/50W) SW, M5 (For 050W/650W) SW, M5 (Stainless Steel Model) (For 050W/650W) SW, M6 (For 650W) SW, M6 (For 850W/050W) 35 SW SW, M6 (For 50W/650W) 8 36 SW06S SW, M6 (Stainless Steel Model) 3 37 SW0 SW, M (For 650W~050W) 39 PW0 PW, M (For 650W~050W) 0 PW05 PW, M5 (For 650W) 3 PW, M5 (For 50W) PW, M5 (For 050W) 5 PW, M5 (For 650W) 6 PW05S PW, M5 (Stainless Steel Model) (For 050W/650W) PW06A PW, M6 (A)(For 650W~050W) 3 PW, M6 (A)(For 50W/650W) C58-

117 -3 ARCH COVER GROUP M REF. NO. PART NO. DESCRIPTION Q'TY 3 PW06B PW06BS PW, M6 (B)(For 50W/650W) PW, M6 (B)(Stainless Steel Model) (For 50W/650W) C59-

118 -C60-

119 -3- BLOCKASS'Y (For 650W--050W) M C6-

120 -3- BLOCK ASS'Y M (For 650W~050W) REF. PART NO. DESCRIPTION Q'TY NO. M Block 6 BR635ZZ Bearing, 635ZZ HBS056N HBS, M5 6 (N) PW05 PW, M SW05 SW, M C6-

121 -- CONNECTING ROD GROUP M (For 850W/050W) -C6--

122 -- CONNECTING ROD GROUP (For 850W/050W) M REF. NO. PART NO. DESCRIPTION Q'TY M7--00 M M M M M Connecting Rod Connector Slant Block Bracket (Left) Bracket (Right) Collar T Swivel Head, NHS06 6 MB75 Metal Bushing, 75 9 HSS0506GN HSS, M5 6 (G)(N) HBS066N HBS, M6 6 (N) HBS060N HBS, M6 0 (N) HBS0635HN HBS, M6 35 (H)(N) 9 HN06 HN, M NTE06 NTE, M SW06 SW, M PW06A PW, M6 (A) 37 PW06C PW, M6 (C) C6--

123 -- CONNECTING ROD GROUP (For 50W/650W) M C63-

124 -- CONNECTING ROD GROUP M (For 50W/650W) REF. NO. PART NO. DESCRIPTION Q'TY 3 M M M M Bracket Connecting Rod Connector Slant Block 9 TC-05 Spring 0 H-7 Washer T Swivel Head, NHS MB5 Metal Bushing, 5 HBS060N HBS, M6 0 (N) 7 HBS0630N HBS, M6 30 (N) 5 HBS0635HN HBS, M6 35 (H)(N) 9 HN06 HN, M NTE06 NTE, M SW06 SW, M PW06A PW, M6 (A) 37 PW06C PW, M6 (C) C6-

125 3 ACCUMULATOR UNIT M M C65-

126 3 ACCUMULATOR UNIT M M REF. NO. 3 PART NO. DESCRIPTION Q'TY M Accumulator Unit (For 650W) M S M Accumulator Unit (Stainless Steel Model) (For 650W) Accumulator Unit (For 850W/050W) M S M Accumulator Unit (Stainless Steel Model) (For 850W/050W) Accumulator Unit (For 50W/650W) M S Accumulator Unit (Stainless Steel Model) (For 50W/650W) M Strap Amount Control Group (SEE PG.C67) M (SEE PG.C69) M S M M S M M S M M S Auto Strap Feeding Group Auto Strap Feeding Group (Stainless Steel Model) Accumulator Box Group (For 650W) Accumulator Box Group (Stainless Steel Model)(For 650W) Accumulator Box Group (For 850W/050W) Accumulator Box Group (Stainless Steel Model)(For 850W/050W) Accumulator Box Group (For 50W/650W) Accumulator Box Group (Stainless Steel Model)(For 50W/650W) (SEE PG. C85) (SEE PG.C87) -C66-

127 3- STRAP AMOUNT CONTROL GROUP M C67-

128 3- STRAP AMOUNT CONTROL GROUP M REF. NO. PART NO. DESCRIPTION Q'TY 3 T M M Shaft Spring Balance Bar TF-007 Micro Switch 8 T Accumulator Adjusting Bolt 9 T Twist Stopper T Tube T Sensor Lever 07 6 BR6900ZZ Bearing, 6900ZZ HBS00N HBS, M 0 (N) FMS00 FMS, M PMS036 PMS, M HSS005GN HSS, M 5 (G)(N) 3 HN03 HN, M3 35 HN08 HN, M SW03 SW, M3 3 0 SW0 SW, M SW08 SW, M C68-

129 3- AUTO STRAP FEEDING GROUP M C69-

130 3- AUTO STRAP FEEDING GROUP M REF. NO. PART NO. DESCRIPTION Q'TY M Auto Strap Feeding Group M S Auto Strap Feeding Group (Stainless Steel Model) M Guide Block M Upper Strap Guide 3 M Lower Strap Guide M Strap Guide Cover 5 M Lever M Cover M Fixing Plate M S Fixing Plate (Stainless Steel Model) M Roller Ass'y (SEE PG. C73) M S Roller Ass'y (Stainless Steel Model) M Movable Strap Guide Ass'y (SEE PG. C75) M M Motor Ass'y (SEE PG. C77) M Inlet Strap Guide Ass'y (SEE PG. C79) M S Inlet Strap Guide Ass'y (Stainless Steel Model) 5 T Assistant Roller Shaft Ass'y (SEE PG.C83) M Spring Hook 9 T6--6 Motor (M5) T Motor Cover T Spring LA Label 7 TMS008 TMS, M HBS056N HBS, M5 6 (N) HBS06N HBS, M 6 (N) HBS06S HBS, M 6 (Stainless Steel Model) 3 HBS0508N HBS, M5 8 (N) HBS05N HBS, M5 (N) 9088 HBS05S HBS, M5 (Stainless Steel Model) 3 HBS050N HBS, M5 0 (N) HBS055N HBS, M5 5 (N) 37 FMS00 FMS, M 0 38 FMS05 FMS, M SW0 SW, M SW0S SW, M (Stainless Steel Model) -C70-

131 3- AUTO STRAP FEEDING GROUP M REF. PART NO. DESCRIPTION Q'TY NO. SW05 SW, M SW05S SW, M5 (Stainless Steel Model) 5 PW0 PW, M PW0S PW, M (Stainless Steel Model) 6 PW05 PW, M5 PW05S PW, M5 (Stainless Steel Model) 9 HN06 HN, M6 53 HSS0506GN HSS, M5 6 (G)(N) 5 HSS0508GN HSS, M5 8 (G)(N) C7-

132 -C7-

133 3-- ROLLER ASS'Y M C73-

134 3-- ROLLER ASS'Y M REF. NO. PART NO. DESCRIPTION Q'TY M Roller Ass'y M S Roller Ass'y (Stainless Steel Model) T Shaft T Roller 3 T Spacer T S Spacer (Stainless Steel Model) T Roller Support T S Roller Support (Stainless Steel Model) BR608ZZ Bearing, 608ZZ TMS0508 TMS0508S TMS, M5 8 TMS, M5 8 (Stainless Steel Model) -C7-

135 3-- MOVABLE STRAP GUIDE ASS'Y M C75-

136 3-- MOVABLE STRAP GUIDE ASS'Y M REF. NO. PART NO. DESCRIPTION Q'TY 3 M7-3-0 M M M7-3-0 Rotary Arm Spacer Link Movable Strap Guide 8 BR605ZZ Bearing, 605ZZ 9083 HBS050N HBS, M5 0 (N) HBS055N HBS, M5 5 (N) 6 SW05 SW, M PW05 PW, M HN05 HN, M FMS050 FMS, M5 0 -C76-

137 3--3 M MOTOR ASS'Y M C77-

138 3--3 M MOTOR ASS'Y M REF. PART NO. DESCRIPTION Q'TY NO. M Accumulator Main Roller 956 M M Motor Set 8 TB-3 Washer 9 T Motor Support MB00 Metal Bushing, KYA05055 Key, HBS05N HBS, M5 (N) 0 HBS06N HBS, M6 (N) 3 SW06 SW, M C78-

139 3-- INLET STRAP GUIDE ASS'Y M / -C79-

140 3-- INLET STRAP GUIDE ASS'Y M REF. NO PART NO. DESCRIPTION Q'TY M Inlet Strap Guide Ass'y M S Inlet Strap Guide Ass'y (Stainless Steel Model) M Inlet Guide M7-3-00S Inlet Guide (Stainless Steel Model) M Cover M7-3-00S Cover (Stainless Steel Model) M Sensor Lever Support M S Sensor Lever Support (Stainless Steel Model) M Sensor Lever M M S M M P M M S M M S Shaft Shaft (Stainless Steel Model) Shaft Shaft (Stainless Steel Model) Sensor Bracket Sensor Bracket (Stainless Steel Model) Bracket Bracket (Stainless Steel Model) M Spring BR60ZZ Bearing, 60ZZ ER03 ER03S ER0 ER0S Snap Ring, E-3 Snap Ring, E-3 (Stainless Steel Model) Snap Ring, E- Snap Ring, E- (Stainless Steel Model) HBS0308N HBS0308S HBS0N HBS0S HBS, M3 8 (N) HBS, M3 8 (Stainless Steel Model) HBS, M (N) HBS, M (Stainless Steel Model) HBS05N HBS05S PMS036 PMS036S TMS00N TMS00S HBS, M5 (N) HBS, M5 (Stainless Steel Model) PMS, M3 6 PMS, M3 6 (Stainless Steel Model) TMS, M 0 (N) TMS, M 0 (Stainless Steel Model) SW03 SW03S SW, M3 SW, M3 (Stainless Steel Model) C80-

141 3-- INLET STRAP GUIDE ASS'Y M REF. NO PART NO. DESCRIPTION Q'TY SW0 SW0S SW05 SW05S SW, M SW, M (Stainless Steel Model) SW, M5 SW, M5 (Stainless Steel Model) PW0 PW0S PW05 PW05S PW, M PW, M (Stainless Steel Model) PW, M5 PW, M5 (Stainless Steel Model) HN0 HN0S HN, M HN, M (Stainless Steel Model) C8-

142 -C8-

143 3--5 ASSISTANT ROLLER SHAFT ASS'Y T C83-

144 3--5 ASSISTANT ROLLER SHAFT ASS'Y T REF. NO. PART NO. DESCRIPTION Q'TY 3 T T T Shaft Assistant Roller Spacer T Assistant Roller Ass'y 059 BR608ZZ Bearing, 608ZZ HN08 HN, M SW08 SW, M C8-

145 3-3 a. ACCUMULATOR BO GROUP (For 650W--050W) M M C85-

146 3-3 ACCUMULATOR BO GROUP M a. (For 650W~050W) M REF. NO. PART NO. DESCRIPTION Q'TY M M S Accumulator Box Group (For 650W) Accumulator Box Group (Stainless Steel Model)(For 650W) M Accumulator Box Group (For 850W/050W) M S Accumulator Box Group (Stainless Steel Model)(For 850W/050W) Enclosed Plate (For 650W) Enclosed Plate (For 850W/050W) Enclosed Plate (For 650W) Enclosed Plate (For 850W/050W) Enclosed Plate M M M M M M M S 5 M M7-3-30S M Accumulator Box Cover (For 650W) Accumulator Box Cover (Stainless Steel Model)(For 650W) Accumulator Box Cover (For 850W/050W) Accumulator Box Cover (Stainless Steel Model)(For 850W/050W) Enclosed Plate (For 850W/050W) 5 TC-05 Spring 6 7 T T Collar (For 650W) Collar (For 850W/050W) Grommet HBS0635N HBS065N HBS, M6 35 (N)(For 650W) HBS, M6 35 (N)(For 850W/050W) HBS, M6 5 (N) THS0608N THS, M6 8 (N)(For 650W) THS, M6 8 (N)(For 850W/050W) 3 SW06 SW, M6 (For 650W) SW, M6 (For 850W/050W) 3 PW06A PW, M6 (A)(For 650W) PW, M6 (A)(For 850W/050W) 38 HN06 HN, M6 (For 650W) HN, M6 (For 850W/050W) NTE06 NTE, M6 -C86-

147 3-3 ACCUMULATOR BO GROUP M b. (For 50W/650W) -C87-

148 3-3 ACCUMULATOR BO GROUP M b. (For 50W/650W) REF. NO. PART NO. DESCRIPTION Q'TY M M S Accumulator Box Group (For 50W/650W) Accumulator Box Group (Stainless Steel Model)(For 50W/650W) 3 M M M M M7-3-30S Enclosed Plate Enclosed Plate Enclosed Plate Accumulator Box Cover Accumulator Box Cover (Stainless Steel Model) 5 M Enclosed Plate 6 M Enclosed Plate 5 TC-05 Spring 6 T Collar 7 T Grommet HBS0635N HBS, M6 35 (N) 3 HBS065N HBS, M6 5 (N) THS0608N THS, M6 8 (N) 3 3 SW06 SW, M6 3 PW06A PW, M6 (A) 38 HN06 HN, M6 NTE06 NTE, M C88-

149 REEL CONTROL GROUP M M C89-

150 REEL CONTROL GROUP M M REF. NO. PART NO. DESCRIPTION Q'TY M M S M M S Reel Control Group (For 00mm) Reel Control Group (Stainless Steel Model) (For 00mm) Reel Control Group (For 50mm)(Option) Reel Control Group (Stainless Steel Model) (For 50mm)(Option) (SEE PG. C9) -C90-

151 - REEL CONTROL GROUP M I -C9-

152 - REEL CONTROL GROUP M M REF. NO. PART NO. DESCRIPTION Q'TY M Reel Control Group (For 00mm) M S M Reel Control Group (Stainless Steel Model) (For 00mm) Reel Control Group (For 50mm)(Option) M S Reel Control Group (Stainless Steel Model) (For 50mm)(Option) M M7--000S T7--0 T7--0S Inner Flange (For 00mm) Inner Flange (Stainless Steel Model) (For 00mm) Inner Flange (For 50mm)(Option) Inner Flange (Stainless Steel Model) (For 50mm)(Option) LA-3000 Label 036 M M7--000S 6 7 M M S M M7--000S M M S HBS060N HBS060S HBS085N HBS085S Outer Flange Ass'y (For 00mm) Outer Flange Ass'y (Stainless Steel Model) (For 00mm) Outer Flange Ass'y (For 50mm)(Option) Outer Flange Ass'y (Stainless Steel Model) (For 50mm)(Option) Reel Crank Ass'y (For 00mm) Reel Crank Ass'y (Stainless Steel Model) (For 00mm) Reel Crank Ass'y (For 50mm)(Option) Reel Crank Ass'y (Stainless Steel Model) (For 50mm)(Option) HBS, M6 0 (N) HBS, M6 0 (Stainless Steel Model) HBS, M8 5 (N) HBS, M8 5 (Stainless Steel Model) (SEE PG. C93) (SEE PG. C95) 6 7 SW06 SW06S SW08 SW08S PW06A PW06AS PW08C PW08CS SW, M6 SW, M6 (Stainless Steel Model) SW, M8 SW, M8 (Stainless Steel Model) PW, M6 (A) PW, M6 (A) (Stainless Steel Model) PW, M8 (C) PW, M8 (C) (Stainless Steel Model) C9-

153 -- OUTER FLANGE ASS'Y M M C93-

154 -- OUTER FLANGE ASS'Y M M REF. NO. 3 PART NO. DESCRIPTION Q'TY M M7--000S Outer Flange Ass'y (For 00mm) Outer Flange Ass'y (Stainless Steel Model) (For 00mm) Outer Flange Ass'y (For 50mm)(Option) M M S M7--00 M7--00S T7--0 T7--0S M7--00 M7--00S M M7--300S Outer Flange Ass'y (Stainless Steel Model) (For 50mm)(Option) Outer Flange (For 00mm) Outer Flange (Stainless Steel Model) (For 00mm) Outer Flange (For 50mm)(Option) Outer Flange (Stainless Steel Model) (For 50mm)(Option) Plate Plate (Stainless Steel Model) Spring Spring (Stainless Steel Model) 6 LA-3000 Label 036 HBS06N HBS06S HBS060N HBS060S HBS, M 6 (N) HBS, M 6 (Stainless Steel Model) HBS, M6 0 (N) HBS, M6 0 (Stainless Steel Model) 6 7 SW0 SW0S SW06 SW06S SW, M SW, M (Stainless Steel Model) SW, M6 SW, M6 (Stainless Steel Model) PW0 PW0S PW06A PW06AS PW, M PW, M (Stainless Steel Model) PW, M6 (A) PW, M6 (A)(Stainless Steel Model) C9

155 -C95-

156 -- REEL CRANK ASS'Y REF. NO. PART NO. DESCRIPTION Q'TY M M7--000S Reel Crank Ass'y (For 00mm) Reel Crank Ass'y (Stainless Steel Model) (For 00mm) Reel Crank Ass'y (For 50mm)(Option) M M S Reel Crank Ass'y (Stainless Steel Model) (For 50mm)(Option) 3 M7--3 M7--3S Shaft (For 00mm) Shaft (Stainless Steel Model)(For 00mm) M7--33 Shaft (For 50mm)(Option) M7--33S M7--0 Shaft (Stainless Steel Model)(For 50mm) (Option) Shaft 5 M Reel Nut Handle 0 3 M M7--000S T7--00 T7--00S T T7--060S T Screw, M6 8 Screw, M6 8 (Stainless Steel Model) Plate Plate (Stainless Steel Model) Bearing Support Bearing Support (Stainless Steel Model) Brake For Reel T Spacer T T7--030S T T7--050S LA-3030 Support Support (Stainless Steel Model) Washer Washer (Stainless Steel Model) Label MSA060 Lock Pin, ӽ6 0 6 BR600ZZ Bearing, 600ZZ 9 KYA05055 Key, HBS056N HBS056S HBS060N HBS060S HBS065N HBS, M5 6 (N) HBS, M5 6 (Stainless Steel Model) HBS, M6 0 (N) HBS, M6 0 (Stainless Steel Model) HBS, M6 5 (N) 3 38 HBW080L HBW, M8 0 (LH) HN06 HN, M C96-

157 -- REEL CRANK ASS'Y REF. NO PART NO. DESCRIPTION Q'TY SW05 SW05S SW06 SW06S SW08 SW08S PW06C PW06CS PW08C PW08CS SW, M5 SW, M5 (Stainless Steel Model) SW, M6 SW, M6 (Stainless Steel Model) SW, M8 SW, M8 (Stainless Steel Model) PW, M6 (C) PW, M6 (C)(Stainless Steel Model) PW, M8 (C) PW, M8 (C)(Stainless Steel Model) C97-

158 -C98-

159 5 BODY FRAME UNIT M M C99-

160 BODY FRAME UNIT REF. NO. PART NO. DESCRIPTION Q'TY M Body Frame Unit (For 650W) M S M Body Frame Unit (Stainless Steel Model) (For 650W) Body Frame Unit (For 850W) M S M Body Frame Unit (Stainless Steel Model) (For 850W) Body Frame Unit (For 050W) M S M Body Frame Unit (Stainless Steel Model) (For 050W) Body Frame Unit (For 50W) M S M Body Frame Unit (Stainless Steel Model) (For 50W) Body Frame Unit (For 650W) M S Body Frame Unit (Stainless Steel Model) (For 650W) M Body Frame With Foot Bar Group (For 650W) M7-5-00S Body Frame With Foot Bar Group (Stainless Steel Model)(For 650W) M Body Frame With Foot Bar Group (For 850W/050W) M7-5-00S Body Frame With Foot Bar Group (Stainless Steel Model)(For 850W/050W) M Body Frame With Foot Bar Group (For 50W/650W) M S Body Frame With Foot Bar Group (Stainless Steel Model)(For 50W/650W) M Cover Group (For 650W) M7-5-00S Cover Group (Stainless Steel Model) (For 650W) Cover Group (For 850W) M M7-5-00S M M S M M7-5-00S M M S Cover Group (Stainless Steel Model) (For 850W) Cover Group (For 050W) Cover Group (Stainless Steel Model) (For 050W) Cover Group (For 50W) Cover Group (Stainless Steel Model) (For 50W) Cover Group (For 650W) Cover Group (Stainless Steel Model) (For 650W) (SEE PG. C03) (SEE PG.C) -C00-

161 BODY FRAME UNIT REF. NO. 3 PART NO. DESCRIPTION Q'TY M M S M M S T Extension Table Group (For 050W) Extension Table Group (Stainless Steel Model) (For 050W) Extension Table Group (For 650W) Extension Table Group (Stainless Steel Model) (For 650W) Pedal Control Set (Option) (SEE PG.C7) (SEE PG.C35) 959 -C0-

162 -C0-

163 5- BODY FRAME WITH FOOT BAR GROUP M M // / -C03-

164 5- BODY FRAME WITH FOOT BAR GROUP REF. NO PART NO. DESCRIPTION Q'TY M Body Frame With Foot Bar Group (For 650W) M7-5-00S Body Frame With Foot Bar Group (Stainless Steel Model)(For 650W) M Body Frame With Foot Bar Group (For 850W/050W) M7-5-00S Body Frame With Foot Bar Group (Stainless Steel Model)(For 850W/050W) M Body Frame With Foot Bar Group (For 50W/650W) M S Body Frame With Foot Bar Group (Stainless Steel Model)(For 50W/650W) M Body Frame (For 650W) M7-5-00S Body Frame (Stainless Steel Model)(For 650W) M7-5-0 Body Frame (For 850W/050W) M7-5-0S Body Frame (Stainless Steel Model) (For 850W/050W) M7-5-0 M7-5-0S M M7-5-00S M M7-5-00S M7-5-0 M7-5-0S M T T S M M S T T S T T S TK-00 M M Body Frame (For 50W/650W) Body Frame (Stainless Steel Model) (For 50W/650W) Support Support (Stainless Steel Model) Protect Arm (For 650W) Protect Arm (Stainless Steel Model) (For 650W) Protect Arm (For 850W/050W) Protect Arm (Stainless Steel Model) (For 850W/050W) Cover Fix Plate Fix Plate (Stainless Steel Model) Adjusment Leg Adjusment Leg (Stainless Steel Model) Caster (Brake) Caster (Brake)(Stainless Steel Model) Caster (Free) Caster (Free)(Stainless Steel Model) Main Power Switch Grommet Foot Bar Ass'y (For 650W) Foot Bar Ass'y (For 650W)(Option) SEE PG. C07 -C0-

165 5- BODY FRAME WITH FOOT BAR GROUP REF. NO. PART NO. DESCRIPTION Q'TY M S M M S M M S Foot Bar Ass'y (Stainless Steel Model) (For 650W) Foot Bar Ass'y (Stainless Steel Model) (For 650W)(Option) Foot Bar Ass'y (For 850W/050W) Foot Bar Ass'y (For 850W/050W)(Option) Foot Bar Ass'y (Stainless Steel Model) (For 850W/050W) Foot Bar Ass'y (Stainless Steel Model) (For 850W/050W)(Option) Foot Bar Ass'y (For 50W/650W) Foot Bar Ass'y (For 50W/650W)(Option) Foot Bar Ass'y (Stainless Steel Model) (For 50W/650W) Foot Bar Ass'y (Stainless Steel Model) (For 50W/650W)(Option) LA-5009 Label 5 LA-300 Label (Reel Brake Release) 6 LA-3060 Label 7 8 HBS066N HBS066S HBS050N HBS050S HBS, M6 6 (N) HBS, M6 6 (N)(Option) HBS, M6 6 (Stainless Steel Model) HBS, M6 6 (Stainless Steel Model)(Option) HBS, M5 0 (N)(For 650W~050W) HBS, M5 0 (Stainless Steel Model) (For 650W~050W) 0 PMS03 PMS, M TMS006 SW05 SW05S SW06 SW06S SW6 SW6S TMS, M 6 TMS, M 6 (Option) SW, M5 (For 650W~050W) SW, M5 (Stainless Steel Model) (For 650W~050W) SW, M6 SW, M6 (Option) SW, M6 (Stainless Steel Model) SW, M6 (Stainless Steel Model)(Option) SW, M6 SW, M6 (Stainless Steel Model) C05-

166 5- BODY FRAME WITH FOOT BAR GROUP REF. PART NO. DESCRIPTION Q'TY NO. 8 PW06A PW, M6 (A) 96 PW, M6 (A)(Option) 30 PW06AS PW, M6 (A)(Stainless Steel Model) PW, M6 (A)(Stainless Steel Model)(Option) 30 3 WD55070 Wire Duct WD5500 Wire Duct (Option) 3 T Grommet Grommet (Option) EW7006C003 Wire Ass'y -C06-

167 5-- FOOT BAR ASS'Y -C07-

168 5-- FOOT BAR ASS'Y REF. NO. PART NO. DESCRIPTION Q'TY M M S Foot Bar Ass'y (For 650W) Foot Bar Ass'y (Stainless Steel Model) (For 650W) 953 M M S Foot Bar Ass'y (For 850W/050W) Foot Bar Ass'y (Stainless Steel Model) (For 850W/050W) 9533 M M S Foot Bar Ass'y (For 50W/650W) Foot Bar Ass'y (Stainless Steel Model) (For 50W/650W) 953 M7-5-0 Foot Bar (For 650W) M7-5-0S Foot Bar (Stainless Steel Model) (For 650W) 0079 M Foot Bar (For 850W/050W) M7-5-30S Foot Bar (Stainless Steel Model) (For 850W/050W) M7-5-0 M7-5-0S Foot Bar (For 50W/650W) Foot Bar (Stainless Steel Model) (For 50W/650W) M7-5-0 Block 3 M Shaft M S Shaft (Stainless Steel Model) M Adjuster M7-5-00S Adjuster (Stainless Steel Model) TB- Return Spring TB-S Return Spring (Stainless Steel Model) T Sensor Plate MB50 Metal Bushing, 50 8 PMS030 PMS, M3 0 PMS030S PMS, M3 0 (Stainless Steel Model) 0 HBS050N HBS, M5 0 (N) HBS050S HBS, M5 0 (Stainless Steel Model) HBS06N HBS, M6 (N) 3 HBS06S HBS, M6 (Stainless Steel Model) 3 3 SW03 SW, M3 SW03S SW, M3 (Stainless Steel Model) C08-

169 5-- FOOT BAR ASS'Y REF. NO. PART NO. DESCRIPTION Q'TY SW06 SW06S SW05 SW05S PW05 PW05S PW06C PW06CS SW, M6 SW, M6 (Stainless Steel Model) SW, M5 SW, M5 (Stainless Steel Model) PW, M5 PW, M5 (Stainless Steel Model) PW, M6 (C) PW, M6 (C)(Stainless Steel Model) SR5 Stop Ring, S-5 SR5S Stop Ring, S-5 (Stainless Steel Model) 980 -C09-

170 -C0-

171 5- COVER GROUP M M C-

172 5- COVER GROUP REF. NO. PART NO. DESCRIPTION Q'TY M M7-5-00S Cover Group (For 650W) Cover Group (Stainless Steel Model) (For 650W) Cover Group (For 850W) M M7-5-00S M M S M M7-5-00S M M S Cover Group (Stainless Steel Model) (For 850W) Cover Group (For 050W) Cover Group (Stainless Steel Model) (For 050W) Cover Group (For 50W) Cover Group (Stainless Steel Model) (For 50W) Cover Group (For 650W) M7-5-0 M7-5-0S Cover Group (Stainless Steel Model) (For 650W) Front Door (For 650W) Front Door (Stainless Steel Model)(For 650W) M7-5-0 Front Door (For 850W/050W) M7-5-0S M M S Front Door (Stainless Steel Model) (For 850W/050W) Front Door (For 50W/650W) Front Door (Stainless Steel Model) (For 50W/650W) 3 M M7-5-03S Rear Door (For 650W) Rear Door (Stainless Steel Model)(For 650W) M Rear Door (For 850W~650W) M S M7-5-0 M7-5-0S M M7-5-03S M M S M M S M M S Rear Door (Stainless Steel Model) (For 850W~650W) Upper Table Rear (For 650W) Upper Table Rear (Stainless Steel Model) (For 650W) Upper Table Rear (For Photo Eye)(For 650W) (Option) Upper Table Rear (For Photo Eye)(Stainless Steel Model)(For 650W)(Option) Handle (Option) Handle (Stainless Steel Model)(Option) Cover (For 650W/850W/50W) Cover (Stainless Steel Model) (For 650W/850W/50W) Table Support Table Support (Stainless Steel Model) C-

173 5- COVER GROUP REF. PART NO. DESCRIPTION Q'TY NO. 8 M Bracket (Option) M M M7-5-00S M M7-5-00S M M S M M S M M S M M S M M S M M S M M S M M S M M S M M S Guide LH Plate (For 050W/650W) Upper Table Front Ass'y (For 650W) Upper Table Front Ass'y (Stainless Steel Model)(For 650W) Upper Table Front Ass'y (For 850W) Upper Table Front Ass'y (Stainless Steel Model)(For 850W) Upper Table Front Ass'y (For 050W) Upper Table Front Ass'y (Stainless Steel Model)(For 050W) Upper Table Front Ass'y (For 50W) Upper Table Front Ass'y (Stainless Steel Model)(For 50W) Upper Table Front Ass'y (For 650W) Upper Table Front Ass'y (Stainless Steel Model)(For 650W) Upper Table Rear Ass'y (For 850W) Upper Table Rear Ass'y (Stainless Steel Model) (For 850W) Upper Table Rear Ass'y (For Photo Eye) (For 850W)(Option) Upper Table Rear Ass'y (For Photo Eye) (Stainless Steel Model)(For 850W)(Option) Upper Table Rear Ass'y (For 050W) Upper Table Rear Ass'y (Stainless Steel Model) (For 050W) Upper Table Rear Ass'y (For Photo Eye) (For 050W)(Option) Upper Table Rear Ass'y (For Photo Eye) (Stainless Steel Model)(For 050W)(Option) Upper Table Rear Ass'y (For 50W) Upper Table Rear Ass'y (Stainless Steel Model) (For 50W) Upper Table Rear Ass'y (For Photo Eye) (For 50W)(Option) Upper Table Rear Ass'y (For Photo Eye) (Stainless Steel Model)(For 50W)(Option) Upper Table Rear Ass'y (For 650W) Upper Table Rear Ass'y (Stainless Steel Model) (For 650W) (SEE PG. C7) (SEE PG.C9) 965 (SEE PG.C3) 976 -C3-

174 5- COVER GROUP REF. NO. PART NO. DESCRIPTION Q'TY M M S Upper Table Rear Ass'y (For Photo Eye) (For 650W)(Option) Upper Table Rear Ass'y (For Photo Eye) (Stainless Steel Model)(For 650W)(Option) 6 TK-035 Interlock Safety Switch 7 H Sealing Switch 8 T Cable Gland (PG9) T T7--08 Block (For 650W/850W/50W) Block (For 050W/650W) 6 HBS0508N HBS, M5 8 (N)(For 050W/650W) 7 HBS056N HBS, M5 6 (N) 8 HBS055N HBS055S HBS, M5 5 (N) HBS, M5 5 (Stainless Steel Model) 30 HBS0630N HSB, M6 30 (N) FMS050 FMS050S TMS05 TMS05S TMS050 TMS050S TMS060N TMS060S THS0508N THS0508S THS0630N THS0630S FMS, M5 0 (For 050W/650W) FMS, M5 0 (Stainless Steel Model) (For 050W/650W) TMS, M5 (Option) TMS, M5 (Stainless Steel Model)(Option) TMS, M5 0 (For 650W/850W/50W) TMS, M5 0 (For 050W/650W) TMS, M5 0 (Stainless Steel Model) (For 650W/850W/50W) TMS, M5 0 (Stainless Steel Model) (For 050W/650W) TMS, M6 0 (N) TMS, M6 0 (Stainless Steel Model) THS, M5 8 (N)(Option) THS, M5 8 (Stainless Steel Model)(Option) THS, M6 30 (N) THS, M6 30 (Stainless Steel Model) HN06 SW05S HN, M6 (For 650W~050W) HN, M6 (For 50W/650W) SW, M5 (Stainless Steel Model)(Option) 96 -C-

175 5- COVER GROUP REF. PART NO. DESCRIPTION Q'TY NO. SW05 SW, M5 (For 650W/850W/50W) SW, M5 (For 050W/650W) 0 5 SW06 SW, M6 (For 650W~050W) 956 SW, M6 (For 50W/650W) 7 8 PW05 PW05S PW, M5 (For 650W/850W/50W) PW, M5 (For 050W/650W) PW, M5 (Stainless Steel Model) 0 9 PW06A PW, M6 (A) 5 NTE05 NTE, M EW70006C00 Wire Ass'y (For 650W) EW70008D00 Wire Ass'y (For 850W/050W) EW7006C00 Wire Ass'y (For 50W/650W) -C5-

176 -C6-

177 5-- UPPER TABLE FRONT ASS'Y M (For 650W) -C7-

178 5-- UPPER TABLE FRONT ASS'Y M (For 650W) REF. NO. PART NO. DESCRIPTION Q'TY M M7-5-00S Upper Table Front Ass'y (For 650W) Upper Table Front Ass'y (Stainless Steel Model)(For 650W) M7-5- Upper Table Front M7-5-S Upper Table Front (Stainless Steel Model) 3 M M7-5-30S M Shaft Shaft (Stainless Steel Model) Bracket T Switch Actuator FMS050 FMS, M5 0 7 FMS050S FMS, M5 0 (Stainless Steel Model) 0383 THS050N THS050S THS, M5 0 (N) THS, M5 0 (Stainless Steel Model) C8-

179 5-- UPPER TABLE FRONT ASS'Y M (For 850W--650W) M \ I I I \... N -C9-

180 5-- UPPER TABLE FRONT ASS'Y (For 850W~650W) REF. NO. PART NO. DESCRIPTION Q'TY M M7-5-00S Upper Table Front Ass'y (For 850W) Upper Table Front Ass'y (Stainless Steel 965 Model)(For 850W) Upper Table Front Ass'y (For 050W) M M S M M S M M S M7-5- M7-5-S M7-5-3 M7-5-3S M7-5-6 M7-5-6S M7-5-9 M7-5-9S Upper Table Front Ass'y (Stainless Steel Model)(For 050W) Upper Table Front Ass'y (For 50W) Upper Table Front Ass'y (Stainless Steel Model)(For 50W) Upper Table Front Ass'y (For 650W) Upper Table Front Ass'y (Stainless Steel Model)(For 650W) Upper Table Front (For 850W) Upper Table Front (Stainless Steel Model) (For 850W) Upper Table Front (For 050W) Upper Table Front (Stainless Steel Model) (For 050W) Upper Table Front (For 50W) Upper Table Front (Stainless Steel Model) (For 50W) Upper Table Front (For 650W) Upper Table Front (Stainless Steel Model) (For 650W) M M7-5-30S M Shaft Shaft (Stainless Steel Model) Bracket T6-5-0 Table Roller (50mm)(For 850W) Table Roller (50mm)(For 050W) Table Roller (50mm)(For 50W/650W) T6-5- Table Roller (50mm)(Stainless Steel Model) (For 850W) Table Roller (50mm)(Stainless Steel Model) (For 050W) Table Roller (50mm)(Stainless Steel Model) (For 50W/650W) C0-

181 5-- UPPER TABLE FRONT ASS'Y (For 850W~650W) REF. NO. PART NO. DESCRIPTION Q'TY 0 T Table Roller Shaft (For 850W) Table Roller Shaft (For 050W) Table Roller Shaft (For 50W/650W) 8 T6-5-3 Table Roller Shaft (Stainless Steel Model) 6 (For 850W) Table Roller Shaft (Stainless Steel Model) (For 050W) Table Roller Shaft (Stainless Steel Model) 8 (For 50W/650W) Switch Actuator 3 T T T7-5-0 T T7-5-00S Table Roller (30mm)(For 050W) Table Roller (30mm)(Stainless Steel Model) (For 050W) Table Roller Shaft (For 050W) Table Roller Shaft (Stainless Steel Model) (For 050W) FMS050 FMS, M5 0 7 FMS050S FMS, M5 0 (Stainless Steel Model) 0383 THS050N THS050S THS, M5 0 (N) THS, M5 0 (Stainless Steel Model) ER07 ER07S Snap Ring, E-7 (For 850W) Snap Ring, E-7 (For 050W~650W) Snap Ring, E-7 (Stainless Steel Model) (For 850W) Snap Ring, E-7 (Stainless Steel Model) (For 050W~650W) C-

182 -C-

183 5--3 UPPER TABLE REAR ASS'Y M (For 850W--650W) M C3-

184 5--3 UPPER TABLE REAR ASS'Y (For 850W~650W) REF. NO. PART NO. DESCRIPTION Q'TY M M S Upper Table Rear Ass'y (For 850W) Upper Table Rear Ass'y (Stainless Steel Model) (For 850W) 976 M Upper Table Rear Ass'y (For Photo Eye) (For 850W)(Option) M S Upper Table Rear Ass'y (For Photo Eye) (Stainless Steel Model)(For 850W)(Option) M M S Upper Table Rear Ass'y (For 050W) Upper Table Rear Ass'y (Stainless Steel Model) (For 050W) M Upper Table Rear Ass'y (For Photo Eye) (For 050W)(Option) M S Upper Table Rear Ass'y (For Photo Eye) (Stainless Steel Model)(For 050W)(Option) M M S Upper Table Rear Ass'y (For 50W) Upper Table Rear Ass'y (Stainless Steel Model) (For 50W) M Upper Table Rear Ass'y (For Photo Eye) (For 50W)(Option) M S Upper Table Rear Ass'y (For Photo Eye) (Stainless Steel Model)(For 50W)(Option) M M S Upper Table Rear Ass'y (For 650W) Upper Table Rear Ass'y (Stainless Steel Model) (For 650W) M Upper Table Rear Ass'y (For Photo Eye) (For 650W)(Option) M S Upper Table Rear Ass'y (For Photo Eye) (Stainless Steel Model)(For 650W)(Option) M7-5-3 M7-5-3S Upper Table Rear (For 850W) Upper Table Rear (Stainless Steel Model) (For 850W) M Upper Table Rear (For Photo Eye)(For 850W) (Option) M7-5-33S Upper Table Rear (For Photo Eye) (Stainless Steel Model)(For 850W)(Option) Upper Table Rear (For 050W) M7-5-3 M7-5-3S M M7-5-35S Upper Table Rear (Stainless Steel Model) (For 050W) Upper Table Rear (For Photo Eye)(For 050W) (Option) Upper Table Rear (For Photo Eye) (Stainless Steel Model)(For 050W)(Option) -C-

185 5--3 UPPER TABLE REAR ASS'Y (For 850W~650W) REF. NO. PART NO. DESCRIPTION Q'TY M M7-5-36S Upper Table Rear (For 50W) Upper Table Rear (Stainless Steel Model) (For 50W) M Upper Table Rear (For Photo Eye)(For 50W) (Option) M7-5-37S Upper Table Rear (For Photo Eye) (Stainless Steel Model)(For 50W)(Option) Upper Table Rear (For 650W) M M7-5-38S M M7-5-39S Upper Table Rear (Stainless Steel Model) (For 650W) Upper Table Rear (For Photo Eye)(For 650W) (Option) Upper Table Rear (For Photo Eye) (Stainless Steel Model)(For 650W)(Option) M M S T6-5-0 T6-5- T T6-5-3 T T7-5-0 Handle (Option) Handle (Stainless Steel Model)(Option) Table Roller (50mm)(For 850W) Table Roller (50mm)(For 050W) Table Roller (50mm)(For 50W/650W) Table Roller (50mm)(Stainless Steel Model) (For 850W) Table Roller (50mm)(Stainless Steel Model) (For 050W) Table Roller (50mm)(Stainless Steel Model) (For 50W/650W) Table Roller Shaft (For 850W) Table Roller Shaft (For 050W) Table Roller Shaft (For 50W/650W) Table Roller Shaft (Stainless Steel Model) (For 850W) Table Roller Shaft (Stainless Steel Model) (For 050W) Table Roller Shaft (Stainless Steel Model) (For 50W/650W) Table Roller (30mm)(For 050W) Table Roller (30mm)(For 50W/650W) Table Roller (30mm)(Stainless Steel Model) (For 050W) Table Roller (30mm)(Stainless Steel Model) (For 50W/650W) C5-

186 5--3 UPPER TABLE REAR ASS'Y (For 850W~650W) REF. PART NO. DESCRIPTION Q'TY NO. 9 T Table Roller Shaft (For 050W) Table Roller Shaft (For 50W/650W) T7-5-00S Table Roller Shaft (Stainless Steel Model) 3 (For 050W) Table Roller Shaft (Stainless Steel Model) (For 50W/650W) 6 ER07 Snap Ring, E-7 (For 850W) Snap Ring, E-7 (For 050W) Snap Ring, E-7 (For 50W/650W) ER07S Snap Ring, E-7 (Stainless Steel Model) (For 850W) Snap Ring, E-7 (Stainless Steel Model) (For 050W) Snap Ring, E-7 (Stainless Steel Model) (For 50W/650W) TMS05 TMS05S TMS, M5 (Option) TMS, M5 (Stainless Steel Model)(Option) SW05 SW05S SW, M5 (Option) SW, M5 (Stainless Steel Model)(Option) C6-

187 5-3 ETENSION TABLE GROUP (For 050W/650W) M M C7-

188 5-3 ETENSION TABLE GROUP (For 050W/650W) REF. NO. 3 5 PART NO. DESCRIPTION Q'TY M Extension Table Group (For 050W) M S Extension Table Group (Stainless Steel Model) (For 050W) M Extension Table Group (For 650W) M S Extension Table Group (Stainless Steel Model) (For 650W) M Extension Table (For 050W) M S Extension Table (Stainless Steel Model) (For 050W) Extension Table (For 650W) M M7-5-30S M M S M M S M M7-5-30S M M S Extension Table (Stainless Steel Model) (For 650W) Rack (Right)(Only 650W) Rack (Right)(Stainless Steel Model) (Only 650W) Rack (Left)(Only 650W) Rack (Left)(Stainless Steel Model) (Only 650W) Upper Table Front (Only 050W) Upper Table Front (Stainless Steel Model) (Only 050W) Upper Table Rear (Only 050W) Upper Table Rear (Stainless Steel Model) (Only 050W) M M S M M S Upper Table Front Ass'y (Only 650W) Upper Table Front Ass'y (Stainless Steel Model)(Only 650W) Upper Table Rear Ass'y (Only 650W) Upper Table Rear Ass'y (Stainless Steel Model)(Only 650W) (SEE PG.C3) (SEE PG. C33) 6 7 M M S T Cover Cover (Stainless Steel Model) Block 3 HBS066N HBS066S HBS, M6 6 (N)(For 050W) HBS, M6 6 (N)(For 650W) HBS, M6 6 (Stainless Steel Model) (Only 650W) C8-

189 5-3 ETENSION TABLE GROUP (For 050W/650W) REF. NO. PART NO. DESCRIPTION Q'TY 7 THS0630N THS0630S THS, M6 30 (N) THS, M6 30 (Stainless Steel Model) TMS05 TMS05S TMS050 TMS050S FMS05 FMS05S TMS, M5 TMS, M5 (Stainless Steel Model) TMS, M5 0 TMS, M5 0 (Stainless Steel Model) FMS, M5 FMS, M5 (Stainless Steel Model) HN05 HN, M5 3 HN06 HN, M6 (For 050W) HN, M6 (For 650W) SW06 SW06S SW, M6 (For 050W) SW, M6 (For 650W) SW, M6 (Stainless Steel Model)(Only 650W) PW06A PW, M6 (A) 3 PW06C PW06CS PW, M6 (C)(For 050W) PW, M6 (C)(For 650W) PW, M6 (C)(Stainless Steel Model) (Only 650W) C9-

190 -C30-

191 5-3- UPPER TABLE FRONT ASS'Y M (For 650W) -C3-

192 5-3- UPPER TABLE FRONT ASS'Y M (For 650W) REF. NO. PART NO. DESCRIPTION Q'TY M M S Upper Table Front Ass'y (For 650W) Upper Table Front Ass'y (Stainless Steel Model)(For 650W) M7-5-3 M7-5-3S Upper Table Front Upper Table Front (Stainless Steel Model) 6 7 T T7-5-0 T T7-5-00S Table Roller (30mm) Table Roller (30mm)(Stainless Steel Model) Table Roller Shaft Table Roller Shaft (Stainless Steel Model) ER07 ER07S Snap Ring, E-7 Snap Ring, E-7 (Stainless Steel Model) C3-

193 5-3- UPPER TABLE REAR ASS'Y (For 650W) M C33-

194 5-3- UPPER TABLE REAR ASS'Y M (For 650W) REF. NO. PART NO. DESCRIPTION Q'TY M M S Upper Table Rear Ass'y (For 650W) Upper Table Rear Ass'y (Stainless Steel Model)(For 650W) M M7-5-30S Upper Table Rear Upper Table Rear (Stainless Steel Model) 6 7 T T7-5-0 T T7-5-00S Table Roller (30mm) Table Roller (30mm)(Stainless Steel Model) Table Roller Shaft Table Roller Shaft (Stainless Steel Model) ER07 ER07S Snap Ring, E-7 Snap Ring, E-7 (Stainless Steel Model) C3-

195 5- PEDAL CONTROL SET T (OPTION) -C35-

196 5- PEDAL CONTROL SET T (OPTION) REF. NO. PART NO. DESCRIPTION Q'TY T T Connector (Foot Switch) Micro Switch TMS0308 TMS0308S TMS, M3 8 TMS, M3 8 (Stainless Steel Model) 979 -C36-

197 6 ELECTRIC CONTROL UNIT M M C37-