20 OG10 ATAL C TILE SAWS

Transcription

1 CATALOG TILE SAWS

2 LOCATION Warm Springs Road Riverside, California t. (888) f. (951)

3 ABOUT US SawMaster Diamond Tools, Inc. is a manufacturer of high quality, precision tools for tile, stone, masonry and concrete. Since its founding on March 1, 1997, SawMaster has expanded its product line to include a multitude of saws, diamond blades and other tools to meet the demands of virtually every niche in the market. Whether the buyer is a DIY user seeking a light weight, portable saw or a professional contractor searching for a heavy-duty fabrication saw, SawMaster has the right product to get the job done quickly, cost-effectively and with exceptional results. INNOVATIVE DIAMOND TOOLS With its ongoing research and development, SawMaster is constantly developing new products to solve rising industry challenges. CUSTOMER SERVICE We pride ourselves in our customer service and technical assistance. SawMaster is committed to catering to the needs of the industry professional.

4 TABLE OF CONTENTS COMPACT WET TILE SAWS 07 WET TILE SAWS 11 7 SDT-710E p.07 7 SDT-710 p.11 7 SDT-710SR p.13 7 SDT-700SR p SDT-1000JR p SDT-1010 p SDT-1000S / P p SDT-1000XT p SDT-1030 p SDT-1030M2 p.27

5 WET TILE & STONE SAWS 31 MASONRY SAWS 43 PROFESSIONAL VACUUM 47 SAW COMPARISON 49 DIAMOND TOOLS SDT-1025 p SDT-1027 p SDT-1037 p SDT-25EX p SDT-35XL p SDT-1410 p SDT-1402 p.45 Dual Motor SVP-25 p.47 Saw Comparison p.49 Cheetah Diamond Blades p.51 POLICIES 52 Policies p.52

6 THE ALL NEW E.D.I. System Pro.1 ELECTRICAL. DIAGNOSTIC. INTERFACE. SYSTEM The Electrical Diagnostic Interface (E.D.I.) System is a revolutionary device that replaces the role of conventional power switches. It serves as a single interface from which to operate the machine and its various electrical components. More importantly, the E.D.I. System is capable of monitoring the machine s performance and health and then providing feedback that will allow the user to work more efficiently and to quickly identify problems.

7 E.D.I. System Pro.1 Features Thermal Overload Protection E.D.I. System features an integrated circuit breaker to prevent the motor from overheating and protects the saw against power surges. Digital Display E.D.I. System monitors a variety of factors, which it reports on the display, such as the voltage of the power source, the amount of current drawn at any given time while cutting and the amount of time taken to complete a cut. Digital Gauge This gauge indicates the amount of load exerted on the motor while performing a cut. At the end of a cut, the E.D.I. System determines the blade performance, which it then displays on the gauge. Mode Button This button is used to manage various features within the E.D.I. System, such as toggling the water pump on and off and setting the water pump to operate in either manual or automatic mode. Status Indicators Once plugged in, the E.D.I. System will test key electrical components for integrity. If a malfunction is detected, the appropriate indicator will flash. Under normal operating conditions, the indicators also show the status of each component (i.e. on/off). Work Light Button This button allows the user to toggle the equipped LED work light on and off and adjust the brightness intensity. Power Toggle Switch The toggle switch is protected by a weatherproof silicon boot and a metal shield designed to cope with harsh handling.

8 SDT-710E WET TILE SAWS SDT-710E 7 COMPACT WET TILE SAW The SDT-710E is an entry-level wet tile saw with an emphasis on portability that is evident in its compact and lightweight design. Weighing just 32 lbs, equipped with a high performance 1/2 HP carbon brush motor and capable of cutting tiles 17 in length, it is an ideal saw for DIYs and contractors working on small tile projects. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight Wet Tile Saw SDT-710E 115 V / 60 Hz 1/2 HP 6000 RPM 6 ~ 7 5/8 1-3/ X 12 tile 32 lbs CUTTING HEIGHT Cutting depth can be easily adjusted to accommodate 6 to 7 blades. SAFETY ROCKER SWITCH The power switch features a safety tab which can be removed to render the switch inoperable, thus preventing the accidental activation of the motor.

9 2010 CATALOG REUSABLE AIR FILTER The motor utilizes a special fireresistant filter to remove debris from the air intake. The filter is designed for easy cleaning and can be reused indefinitely. 08

10 obtain full contr LED DASHBOAR

11 ol with the D

12 SDT-710 WET TILE SAWS SDT WET TILE SAW The SDT-710 s unique endoframe design yields significant weight savings due to its reliance on the surrounding polypropylene water tray for support. At the same time, its sturdy construction makes the unit exceptionally rigid and durable for improved precision and long lasting usage. LCBH The patented LCBH (Liquid Cooled Bearing Housing) works in conjunction with the water pump to cool down the bearing housing during saw operation. CARBON BRUSH MOTOR The equipped motor generates tremendous torque for outstanding cutting performance, while maintaining a compact and lightweight form for enhanced portability.

13 2010 CATALOG THERMAL OVERLOAD PROTECTION Automatic thermal overload protection prevents the motor from overheating and protects against power surges. ABS WATER TRAY The provided ABS water tray is durable, yet lightweight, which helps minimize the saw s overall weight. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight Wet Tile Saw SDT V / 60 Hz 1 HP 6000 RPM 6 ~ 7 5/8 1-3/ X 12 tile 43 lbs TABLE RETENTION DEVICE The cutting table is equipped with a spring lock 12 to secure the cutting table when transporting the saw in between job sites.

14 SDT-710SR WET TILE SAWS SDT-710SR 7 WET TILE SAW Combining high performance and increased cutting capacity in a lightweight package, the SDT-710SR is the most powerful and versatile of the SDT-710 series. Driving the 7 blade is a patented 1 HP carbon brush motor which delivers enough torque to handle virtually any tile job with relative ease. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight Wet Tile Saw SDT-710SR 115 V / 60 Hz 1 HP 6000 RPM 6 ~ 7 5/8 1-3/ X 14 tile 55 lbs CARBON BRUSH MOTOR The equipped 1 HP carbon brush motor generates a tremendous amount of torque while maintaining a lightweight and compact package. ABS WATER TRAY The provided ABS water tray is durable, yet lightweight, which helps minimize the saw s overall weight.

15 2010 CATALOG BASIC E.D.I. SYSTEM The E.D.I. System is capable of monitoring the machine s performance and health and then providing feedback that will allow the user to work more efficiently. CUTTING CAPACITY The SDT-710SR has a generous cutting length of 20, making it an ideal candidate for contractors in need of a high performance portable saw. CUTTING TABLE The cutting table s injection mold rubber mat provides a firm, durable work surface while the ball bearing wheels and rollers ensure smooth, effortless movement. 14

16 SDT-700SR WET TILE SAWS SDT-700SR 7 WET TILE SAW The SDT-700SR is a 7 wet tile saw that is capable of achieving the large cutting capacities typically offered by larger 10 saws. Its unique endoframe design allows it to achieve cutting lengths of up to 20 straight and 14 diagonal with minimal additional weight. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight Wet Tile Saw SDT-700SR 115 V / 60 Hz 1 HP 6000 RPM 6 ~ 7 5/8 1-3/ X 14 tile 60 lbs INDUCTION MOTOR To supplement its considerable cutting capacity, the saw is equipped with a high performance, belt-driven 1 HP induction motor. ABS WATER TRAY The provided ABS water tray is durable, yet lightweight, which helps minimize the saw s overall weight.

17 2010 CATALOG BASIC E.D.I. SYSTEM The E.D.I. System is capable of monitoring the machine s performance and health and then providing feedback that will allow the user to work more efficiently. CUTTING CAPACITY The SDT-700SR has a generous cutting length of 20, making it an ideal candidate for contractors in need of a high performance portable saw. CUTTING TABLE The cutting table s injection mold rubber mat provides a firm, durable work surface while the ball bearing wheels and rollers ensure smooth, effortless movement. 16

18 SDT-1000JR WET TILE SAWS SDT-1000JR 10 WET TILE SAW The SDT-1000Jr wet tile saw features a robust 1-1/2 HP induction motor capable of handling a broad range of applications, including thicker materials such as brick and paver. The saw is lighter than most saws in its class, weighing just shy of 100 lbs and priced for budget-minded professionals that are in the market for a 10 tile saw. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight SDT-1000JR 115 V / 60 Hz 1-1/2 HP 3200 RPM 6 ~ 10 5/8 3-1/ X 14 tile 98 lbs Wet Tile Saw CUTTING TABLE The cast aluminum cutting table is covered by a rubber mat that is injected directly onto the table and chemically bonded for enhanced durability.

19 2010 CATALOG BLADE GUARD WITH BRUSHES The blade guard contains brushes that not only minimize spray, but they also uniformly distribute the water over the blade for more effective cooling. LCBH The patented LCBH (Liquid Cooled Bearing Housing) works in conjunction with the water pump to cool down the bearing housing during saw operation. 18

20 SDT-1010 WET TILE SAWS SDT WET TILE SAW The SDT-1010 is designed to fulfill the need for a powerful, yet lightweight tile saw capable of cutting large 24 tiles. Its potent 2 HP brush motor generates an immense amount of torque to enhance cutting performance. To minimize its weight, the saw relies on a highly durable yet lightweight ABS water tray for structure and support while retaining a rigid steel frame to provide the necessary strength and stability. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight Wet Tile Saw SDT V / 60 Hz 2 HP 3000 RPM 7 ~ 10 5/8 3-1/ X 16 tile 65 lbs RULER GUIDE The cutting table features a convenient imprinted ruler on the rubber mat to assist the operator in making precise cuts. LED WORK LIGHT A built-in cluster of LED lights provide convenient lighting when working in poorly lit areas.

21 2010 CATALOG CARBON BRUSH MOTOR The equipped carbon brush motor generates a tremendous amount of torque, surpassing that of a comparably rated induction motor. At the same time, it is also lighter and smaller, which makes it ideal for portability. PRO E.D.I. SYSTEM The E.D.I. System is capable of monitoring the machine s performance and health and then providing feedback that will allow the user to work more efficiently. 20

22 SDT-1000S & SDT-1000P WET TILE SAWS SDT-1000S & SDT-1000P 10 WET TILE SAWS The SDT-1000S/P is a high performance wet tile saw targeted at professional installers and fabricators that require the enhanced cutting performance made possible by a 2 HP motor. With a generous cutting length of 20 and cutting depth of 3-1/2, the versatile saw is capable of handling a variety of applications with ease. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight Wet Tile Saws SDT-1000S & SDT-1000P 115 V / 60 Hz 2 HP 3200 RPM 6 ~ 10 5/8 3-1/ X 14 tile 105 lbs (SDT-1000S) 115 lbs (SDT-1000P) SDT-1000S ABS WATER TRAY Durable and lightweight. CUTTING TABLE The cast aluminum cutting table is covered by a rubber mat that is injected directly onto the table and chemically bonded for enhanced durability.

23 2010 CATALOG BLADE GUARD WITH BRUSHES The blade guard contains brushes that not only minimize spray, but they also uniformly distribute the water over the blade for more effective cooling. INDUCTION MOTOR The SDT-1000S/P is equipped with a powerful 2HP induction motor that delivers more torque than any other motor in its class. LCBH The patented LCBH (Liquid Cooled Bearing Housing) works in conjunction with the water pump to cool down the bearing housing during saw operation. SDT-1000P STAINLESS STEEL WATER TRAY Ultra-durable for heavyduty jobs. 22

24 SDT-1000XT WET TILE SAWS SDT-1000XT 10 WET TILE SAW The SDT-1000XT wet tile saw employs a revolutionary track system that enables the saw to achieve a sizable cutting length of 24, while maintaining the dimensions and weight of a smaller saw. The standard equipped 1-1/2 HP motor ensures that ample power is available to tackle the most demanding tile installation projects. The provided drip tray and adjustable water feed allows better water control for a cleaner work environment. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight Wet Tile Saw SDT-1000XT 115 V / 60 Hz 1-1/2 HP 3450 RPM 6 ~10 5/8 3-1/ X 16 tile 103 lbs EXTENDED CUTTING LENGTH Revolutionary track system permits the cutting table to reach beyond the end of the track to achieve a longer cutting length without the added bulk or weight of a larger frame. PRO E.D.I. SYSTEM The E.D.I. System is capable of monitoring the machine s performance and health and then providing feedback that will allow the user to work more efficiently.

25 2010 CATALOG DRIP GUARD When cutting large tiles, the drip guard can be raised to help return water spilling off the sides back into the water tray. DRIP TRAY The drip tray returns water spray and runoff produced during operation to the water tray to minimize the loss of water and to keep the work site clean. INDUCTION MOTOR The SDT-1000XT is equipped with a powerful 1-1/2HP induction motor that delivers tremendous torque for easy smooth cuts. 24

26 SDT-1030 WET TILE SAWS SDT WET TILE SAW The SDT-1030 was designed to provide professional installers with the power and cutting capability needed to handle a wide range of projects. It features an incredible cutting length of over 25 that is suitable for cutting 18 tiles on a diagonal and an integrated miter mechanism for making quick beveled cuts. A 2 HP universal motor generates an immense amount of torque to drive each cut. But the most impressive feature is how lightweight the saw is just 72 lbs. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight Wet Tile Saw SDT V / 60 Hz 2 HP 3200 RPM 6 ~10 5/8 3-1/2 25-1/2 18 X 18 tile 72 lbs CUTTING TABLE The cutting table features an injection mold rubber mat that provides a firm, durable work surface while the ball bearing wheels and rollers ensure smooth effortless movement.

27 2010 CATALOG WATER TRAYS To conserve water, rear and side drip trays increase the surface area for collecting water and slurry to prevent spillage. PRO E.D.I. SYSTEM The E.D.I. System is capable of monitoring the machine s performance and health and then providing feedback that will allow the user to work more efficiently. MITER CUTTING The cutting head can be tilted 45 to perform quick and easy miter cuts without the aid of additional tools. 26

28 SDT-1030M2 WET TILE SAWS SDT-1030M2 10 WET TILE SAW The SDT-1030M2 is a truly versatile heavy-duty wet tile saw. Its robust, yet lightweight design offers the same large cutting capacity as the SDT In fact, it is identical in every respect, except for the equipped 1-1/2 HP induction motor, which delivers lasting performance that is unparalleled for a saw of its class. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight Wet Tile Saw SDT-1030M2 115 V / 60 Hz 1-1/2 HP 3200 RPM 6 ~10 5/8 3-1/2 25-1/2 18 X 18 tile 87 lbs CUTTING TABLE The cutting table features an injection mold rubber mat that provides a firm, durable work surface while the ball bearing wheels and rollers ensure smooth effortless movement. PRO E.D.I. SYSTEM The E.D.I. System is capable of monitoring the machine s performance and health and then providing feedback that will allow the user to work more efficiently.

29 2010 CATALOG MITER CUTTING The cutting head can be tilted 45 to perform quick and easy miter cuts without the aid of additional tools. INDUCTION MOTOR The SDT-1030M2 is equipped with a reliable 1-1/2HP high performance motor with superb service life and low operating noise levels. 28

30 conse AUTOM

31 rve water with the ATIC WATER PUMP

32 SDT-1025 WET TILE & STONE SAWS SDT WET TILE & STONE SAW The SDT-1025 is an affordable entry-level rail saw designed to fulfill the large cutting capacity needs of professional tile installers. Equipped with a robust 1-1/2 HP induction motor and 10 diamond blade, the SDT-1025 can cut tiles up to 27 in length with remarkable ease. For added versatility and value, the saw also offers superb plunge cuts, miter cutting capability and an integrated folding stand for convenient setup and transportation. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight Wet Tile & Stone Saw SDT V / 60 Hz 1-1/2 HP 3450 RPM 8 ~ 10 5/8 2-3/ X 19 tile 115 lbs MASTERGUIDE For greater versatility, a Master- Guide cutting accessory is included with the saw to ensure accurate cuts of any specification. RUBBER MATTED CUTTING TABLE The main cutting table is covered with a rubber mat that steadies the material being cut for greater accuracy.

33 2010 CATALOG MITER CUTTING CAPABILITY The rail and cutting head can be tilted 45 to perform quick and easy miter cuts without the aid of additional tools. FOLDING LEGS WITH WHEELS Four integrated legs allow the saw to be easily deployed at the job site, while a pair of wheels facilitate transportation. 32

34 SDT-1027 WET TILE & STONE SAWS SDT WET TILE & STONE SAW The SDT-1027 is an entry-level bridge saw designed for small-scale stone projects. Its 1-1/2 HP direct-drive motor and 10 blade make it suitable for most tile and stone applications. Combined with a lengthy 27 cutting distance afforded by its carriage-rail design, it is capable of cutting large 24 tiles with room to spare. The saw includes an extension table that can be attached to either side of the saw to provide adequate support for wide tiles and for performing diagonal cuts of tiles up to 19 in length. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight Wet Tile & Stone Saw SDT V / 60 Hz 1-1/2 HP 3450 RPM 8 ~ 10 5/8 2-5/ X 19 tile 125 lbs MASTERGUIDE For greater versatility, a Master- Guide cutting accessory is included with the saw to ensure accurate cuts of any specification. RUBBER MATTED CUTTING TABLE The main cutting table is covered with a rubber mat that steadies the material being cut for greater accuracy.

35 2010 CATALOG MITER CUTTING CAPABILITY The rail and cutting head can be tilted 45 to perform quick and easy miter cuts without the aid of additional tools. SIDE EXTENTION TABLE The saw can easily handle large tiles with the help of the side extention table. 34

36 SDT-1037 WET TILE & STONE SAWS SDT WET TILE & STONE SAW For small to midsize stone projects, SawMaster offers the SDT-1037 bridge saw. While it shares the same 1-1/2 HP motor and 10 blade of the entry-level SDT-1025, the SDT-1037 provides a substantially larger cutting capacity, with cutting lengths of up to 37 straight and 26 diagonal. The SDT-1037 also includes a set of slide-in legs with wheels to assist in its transportation and deployment at the job site. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight Wet Tile & Stone Saw SDT V / 60 Hz 1-1/2 HP 3450 RPM 8 ~ 10 5/8 2-1/ X 26 tile 166 lbs SLIDE-IN LEGS The provided slide-in legs are easy to set up and the integrated wheels make transportation a breeze. MITER CUTTING CAPABILITY The rail and cutting head can be tilted 45 to perform quick and easy miter cuts without the aid of any additional tools. SIDE EXTENTION TABLE To provide additional lateral support for large tiles, a side extension table is included and can be attached on either side of the saw, depending on the needs of the operator.

37 2010 CATALOG RUBBER MATTED CUTTING TABLE The main cutting table and extension table are covered with a rubber mat that steadies the material being cut for greater accuracy. BALL BEARING SYSTEM A set of ball bearing wheels promote smooth movement of the carriage along the rail for increased cutting accuracy in both normal and miter cutting configurations. 36

38 SDT-25EX WET TILE & STONE SAWS SDT-25EX 10 WET TILE & STONE SAW The SDT-25EX stone saw features a 10 blade capacity and a 1-1/2 HP motor to facilitate the cutting of large, hard materials like stone, brick and porcelain tile. Spanning 55 in length, the saw is small enough to fit in conventional pickup trucks, while still being able to cut tiles up to 36 straight and 25 diagonally. This model provides built-in support for miter cuts and excellent vertical clearance for deep plunge cuts. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight Wet Tile & Stone Saw SDT-25EX 115 V / 60 Hz 1-1/2 HP 3450 RPM 10 5/8 2-5/ X 25 tile 112 lbs

39 2010 CATALOG CUTTING HEAD The cutting head slides along the rail via a system of ball bearing wheels to ensure smooth movement for increased cutting accuracy. SPLASH GUARDS Durable vinyl and metal splash guards reduce water loss during cutting operation. MITER CUTTING CAPABILITY The saw can perform miter cuts easily by pivoting the rail 45. Due to the saw s weight and large dimensions, additional reinforcing posts are used to provide added stability during cutting operations. 38

40 SDT-35XL WET TILE & STONE SAWS SDT-35XL 14 WET TILE & STONE SAW The SDT-35XL was designed to accommodate large materials thanks to its robust 2-1/2 HP motor, large 14 blade capacity and incredible 56 cutting length. Complete with the ability to perform miter cuts and deep plunge cuts, the saw is suitable for virtually any stone job. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight Wet Tile & Stone Saw SDT-35XL 115 V / 60 Hz 2-1/2 HP 3450 RPM 12 ~ / X 39 tile 248 lbs MITER CUTTING CAPABILITY The saw can perform miter cuts easily by pivoting the rail 45. Due to the saw s weight and large dimensions, additional reinforcing posts are used to provide added stability during cutting operations.

41 2010 CATALOG POWERFUL 2-1/2 HP MOTOR The SDT-35XL relies on a powerful, water-resistant 2-1/2 HP directdrive motor for maximum performance when cutting large, thick natural stones. SPLASH GUARDS Durable vinyl and metal splash guards reduce water loss during cutting operation. CUTTING HEAD The cutting head slides along the rail via a system of ball bearing wheels to ensure smooth movement for increased cutting accuracy. 40

42 work anywhere LED WORKLIGHT

43 with the

44 SDT-1410 MASONRY SAWS SDT MASONRY SAW The SDT-1410 is a dry-cutting masonry chop saw designed for brick & block jobs. A large 14 blade and potent 3 HP carbon-brush motor allow the unit to effectively cut blocks up to 5 thick in a single pass. Despite the saw s overwhelming power and cutting capacity, it is nevertheless one of the lightest in its class weighing only 75 lbs. For added versatility, the saw can be outfitted with an optional wet or dry kit to adapt the saw for use in a variety of situations. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight Masonry Saw SDT V / 60 Hz 3 HP 3600 RPM lbs REUSABLE AIR FILTER The motor utilizes a special fire-resistant filter to remove debris from the air intake. The filter is designed for easy cleaning and can be reused indefinitely. OPTIONAL DRY KIT For added versatility, the saw can be outfitted with an optional wet or dry kit to adapt the saw for use in a variety of situations.

45 2010 CATALOG TABLE LOCK The cutting table is equipped with a spring lock to secure the table in one of two positions: forward for storage or midway for chop cutting. ARBOR COVER The arbor cover permits easy blade installation and removal, and ensures that dust flows down and away from the operator. 44

46 SDT-1402 MASONRY SAWS SDT MASONRY SAW Geared towards heavy-duty masonry work, the SDT-1402 employs a powerful 2-1/2 HP induction motor to drive its sizable 14 blade. This combination allows the saw to cut bricks, blocks and pavers of a broad range of sizes and compositions. Also equipped with spring assisted foldable stand legs, this saw can be easily set up for operation, then folded down for transportation and storage. SPECIFICATIONS Motor Horsepower RPM Blade Capacity Blade Arbor Cutting Depth Cutting Length Diagonally Cuts Weight Masonry Saw SDT V / 60 Hz 2-1/2 HP 3420 RPM 12 ~ / lbs BUILT-IN WATER TRAY Allows for easy water storage during saw operation for user convenience.

47 2010 CATALOG STAND LEGS Allow the user to easily fold and unfold the stand legs for saw operation or storage. HEAVY DUTY POWER SWITCH Prevents the motor from overheating and protects the saw from power surges. 46

48 SVP-25 PROFESSIONAL VACUUM SVP-25 DUAL MOTOR VACUUM Powered by two 1.0 kw motors, the SVP-25 vacuum provides double the suction strength for superior cleaning. Also equipped with a double filtration system, 80 liter capacity stainless steel drum, and easy transport trolley system, the SVP-25 vacuum is a great choice to clean any worksite. SPECIFICATIONS Voltage Power Consumption Power Sync Load Max Air Flow Volume Max Negative Pressure Operating Noise Tank Volume Dimensions Dual Motor Vacuum SVP V / 60 Hz 1800 W 1000 W 4000 I/min Pa 80 db(a) 80 L 23 x 24 x 37

49 2010 CATALOG ADJUSTABLE SUCTION KNOB The adjustable suction knob allows the user to easily increase or decrease suction power. DUAL FILTER A second filter traps micro dust particles while vacuuming to promote cleaner air. STORAGE CAPACITY The large tank can store up to 80 liters (or 21 gallons) of liquid and debris. 48

50 SAW COMPARISON SAW COMPARISON Saw Model SDT-710E SDT-710 SDT-700SR / 710SR SDT-1000JR SDT-1010 SDT-1000S / P SDT-1000XT Voltage/Cycle 115V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz Motor Type Carbon Brush Carbon Brush Induction / Carbon Brush Induction Carbon Brush Induction Induction Horsepower 1/2 HP 1 HP 1 HP 1-1/2 HP 2 HP 2 HP 1-1/2 HP RPM 6,000 6,000 6,000 3,200 3,000 3,200 3,450 Blade Capacity 6 ~ 7 6 ~ 7 6 ~ 7 6 ~ 10 7 ~ 10 6 ~ 10 6 ~ 10 Blade Arbor 5/8 5/8 5/8 5/8 5/8 5/8 5/8 Cutting Depth 1-3/4 1-3/4 1-3/4 3-1/2 3-1/2 3-1/2 3-1/2 Cutting Length Diagonal Cuts 12 X X X X X X X 16 Weight 32 lbs 43 lbs 60 lbs / 55 lbs 98 lbs 65 lbs 105 / 115 lbs 103 lbs LCBH / Work light LCBH Work light LCBH Work light LCBH Work light Water Tray ABS ABS ABS ABS ABS ABS / Stainless Steel ABS Drip Tray Equipped Equipped Equipped Stand Optional Optional Optional Optional Optional Optional Optional E.D.I. System Basic Professional Professional

51 2010 CATALOG SDT-1030 / M2 SDT-1025 SDT-1027 SDT-1037 SDT-25EX SDT-35XL SDT-1410 SDT V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz Carbon Brush / Induction Induction Induction Induction Induction Induction Carbon Brush Induction 2 / 1.5 HP 1-1/2 HP 1-1/2 HP 1-1/2 HP 1-1/2 HP 2-1/2 HP 3 HP 2-1/2 HP 3,200 3,450 3,450 3,450 3,450 3,450 3,600 3,420 6 ~ 10 8 ~ 10 8 ~ 10 8 ~ 10 8 ~ ~ ~ 14 5/8 5/8 5/8 5/8 5/ /2 2-3/8 2-5/8 2-5/8 2-5/8 4-1/ /2 25-1/ X X X X X X / 87 lbs 115 lbs 125 lbs 166 lbs 112 lbs 248 lbs 75 lbs 207 lbs Work light ABS Steel Steel Steel Steel Steel Stainless Steel Steel Equipped Optional Included Included Included Included Included Optional Equipped Professional 50

52

53 POLICIES Prices All orders are subject to Prices and Terms of sale in effect on date of shipment. SawMaster changes its prices to reflect market trends in the industry, so that its products remain competitive in quality and pricing. Prices on sawmaster.com are considered up-to-date and take precedence over any published prices (e.g. price lists, catalogs, and other forms of advertisements). Promotional prices and discounts are subject to verification after order is placed. The customer will be notified if there are any errors found in pricing that affect the invoice amount. Terms of Payment Net 30 days from date of invoice, unless otherwise specified. Delivery - Freight Shipments are F.O.B. for orders of $ or more. This includes all SawMaster products, including diamond blades and tools, saws, parts, and accessories. All other orders not meeting this amount are subject to freight charges, which will be included on the invoice once it is determined. SawMaster reserves the right to select origin of shipment, routing and method of transportation. Premium freight charges (such as air freight) will be at Purchaser s expense (shipped collect or added onto invoice). Written authorization by letter or fax must be received from Purchaser prior to shipment leaving SawMaster. All Purchaser requests for such premium freight shipments, whether acknowledged in writing or not, are the liability of the Purchaser. Material not in stock when order is placed by customer will be shipped as soon as possible thereafter. Claims for Loss or Damaged Goods in Shipment If merchandise is delivered in damaged condition or cartons are missing, a notation must be placed on all papers signed by the receiver. If unreported or concealed damages are noticed after delivery, the carrier should be contacted by telephone and if carrier fails to send an inspector within five days, a request should be made in writing to the carrier, confirming the telephone request for an inspection. All requests for credit due to transportation loss or damage should be accompanied by properly signed papers. A claim for loss or damage must be filed with the carrier within 60 days from the shipping date for UPS or other common carriers. Credit cannot be allowed for damage claims that are not properly substained with supporting papers or received by SawMaster too late for timely filing with the carrier. After-Sale Service All customer service (technical questions, re-order of parts, etc.) will be provided by Saw- Master. All spare parts for after sales service will be stocked and shipped from Riverside, CA. If requested, SawMaster may arrange for its sales representative to hold a training class for product knowledge at its dealer s location. Excluded Components Manufacturer s Warranty Electric motors - 1 year Water pumps - Warranty period varies by manufacturer 2. BLADE: If the bond between the steel core and segment or rim fails during the normal useful life of the blade, SawMaster will replace the blade at no cost to the customer. This warranty does not cover cosmetic damages or damages due to (1) misuse, abuse, negligence, accident, or modifications of the product or any of its components; (2) improper operation or failure to provide reasonable maintenance; or (3) attempted repair by any party other than a SawMaster authorized service facility. All products are subject to wear and tear under normal use. As such, the customer is responsible for all costs associated with the maintenance of said product, including the purchase of replacement components thereof. To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging or packaging affording an equal degree of protection, to any authorized SawMaster service facility, along with proof of purchase in the form of a bill of sale, within the warranty period specified above. Warranty may be void if additional damages are incurred during transportation due to inadequate packaging. SawMaster shall not be responsible for or obligated to pay for freight or other transportation related costs or expenses in connection with any defective products or components that are either returned to SawMaster s facility or any authorized repair station and/or any replacement products or components that are shipped from SawMaster pursuant to this Warranty. SAWMASTER SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAG- ES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, OR NEGLIGENCE. SUCH DAM- AGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF USE OF THE PRODUCT, AND DOWN TIME. SAWMASTER S LIABILITY SHALL NOT EXCEED THE REPLACEMENT COST OF ANY DEFECTIVE PRODUCT OR COMPONENT THEREOF. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED. Exclusions From Warranty SawMaster cannot assume responsibility for claims arising from abuse of the SawMaster product: Due to abuse by the Purchaser in their processing. Due to improper installation practices or procedures. Due to abuse or improper usage by the end-user. Due to contaminants, including, but not limited to, exposure to salt or fresh water, chemicals and any other form of contamination from a source outside of SawMaster s control. Returned Merchandise Authorization (RMA) No products are to be returned without prior SawMaster written authorization and then only in accordance with SawMaster s instructions and terms. Proof of Purchase (copy of SawMaster s invoice along with serial number of items) should accompany all RMA requests. All returned products must be in sellable condition, include all components, and be packed in original packaging. Any returns not satisfying these conditions will be promptly returned to the customer at their expense. The customer is liable for the purchase value of any damaged goods. Limited Warranty SawMaster Diamond Tools, Inc. ( SawMaster ) warrants all products against defects in material or workmanship under the following conditions as determined by their product classification. 1. SAW: For a period of one (1) year from the original date of purchase, if the product is determined to be defective, SawMaster will repair or replace the product, at its option, at no charge to the customer, or pay the associated repair costs to a SawMaster authorized service facility. All replacement parts, new or rebuilt, supplied at SawMaster s option for repairs will be warranted for the remainder of the original warranty period of one (1) year. All defective products or components replaced under this limited warranty will become the property of SawMaster. This limited warranty excludes all components not manufactured by SawMaster, which are listed below with their corresponding independent warranty periods. Such components are warranted by their respective manufacturer, whose warranty will be the governing warranty for that particular product. 52

54 11722 Warm Springs Road Riverside, CA SawMaster Diamond Tools, Inc.