Catalog200. Darley GS SSV. Essay

Size: px
Start display at page:

Download "Catalog200. Darley GS SSV. Essay"

Transcription

1 Catalog200 ' Darley GS SSV Essay

2 Darley ssv High Production Shears 10' x 10 ga. With more than 40 years of experience in building precision sheet and plate fabricating equipment, Darley offers the "SSV" Shear that combines hydraulic protection with mechanical-type performance. This style of shear was specially developed for those industries that work with material up to 5/16" where ultra-high production is needed. Timesaving, cost-cutting features that boost productivity are offered as standard. The average shop can now afford to have full hydraulic overload protection and controllability without sacrificing cutting speed. Because of Darley's advanced hydraulic technology, the "SSV" Shears equal or surpass cutting speeds previously attainable only with mechanical shears, especially under full load. Darley's "SSV" Shears feature a stress relieved steel weldment design that forms a solid unit. Because of its rugged construction, no special foundation is required. Every part is constructed with strength, reliability and durability in mind. The see-thru finger guard gives full safety protection while enabling the operator to feed material close to the blades, reducing scrap.!!em'j The table is fitted with removable rails, which serves two functions. First, because of the small amount of material drag produced by the rails, feeding of plates is done with less effort than on a solid-type table. Secondly, the support arms may be positioned anywhere by simply removing a rail and positioning the arm in the rail's place. The actual table on all Darley Shears is machined so the adaptation of material feeding units and pingauging arms is quite easy and inexpensive. Sheet clamping is applied by hydraulic hold downs that can be fitted with non-marking pads. The clamping force is applied prior to the movement of the shear beam, and becomes a function of the shear force when the top blade penetrates the material. The hold downs are released immediately before reversal of the shear beam, eliminating blade wipe. "SSV" shears are equipped with a front-operated blade clearance adjustment, which adjusts the blade gap at both ends simultaneously. The dial for the blade clearance adjustment is calibrated in material thickness up to machine capacity. There is no guessing as to which blade clearance is required for the best results with different material thicknesses. Turn the dial to correspond to the plate thickness to be cut and proper blade clearance is assured. Resetting of the blade clearance system is not necessary after regrinding the blades, because of the adjusting block construction of the upper blade holder. The blades supplied with the machine are hi-carbon, hi-chrome and have four cutting edges. The blades are segmented to allow for exchanging the right hand blade with the left hand blade, if most cutting is done with sheets less than 4' on the left hand side. This feature allows working for longer periods of time in some cases, without regrinding the blades. The bottom blade is bolted into the fixed table. The "SSV" is for all material thicknesses up to the shears capacity, not just thick materials. Because of its versatility, the "SSV" can be controlled to meet a wide range of requirements, with maximum results in all material thicknesses. The rake ang le on all "SSV" Shears is easily adjustable to keep bow and twist of narrow strips to a minimum. All "SSV" Shears are set up so that the lowest rake angle is only 1/2. Lowering of the rake wi ll increase strokes per minute dramatically. The 40" front-operated power back gauge features convenient fine tuning by hand. The digital readout allows fast and accurate positioning of the back gauge, drastically reducing set up time and material waste. The material stop is of heavy box construction faced with a thick piece of precision ground, stress relieved steel for lasting accuracy. Limit switches on the front and rear of the back gauge arms prevent gauge jamming or damage to the lead screw. Through Darley's design engineering, down time is kept to a minimum. Maintenance on most machines is a major consideration, but not with the "SSV. " Roller guides permit the knife beam to run with zero clearance, and are greased for life. Since the guides run with zero clearance, perfect blade clearance is maintained, resulting in high quality cuts. Standard equipment consists of: 40" front-operated power back gauge, two-59" front support arms with scales and one-59" squaring arm, variable rake-angle adjustment, stroke length adjustment, front-operated instant blade clearance adjustment, shadow-line lighting, 4- edge hi-carbon hi-chrome blades, selector switch with five operating modes, complete electrics and hydraulics, service set, operation and maintenance manual, machine filled with oil. Wired 220/3ph/60hz. Price for conversion to 440V upon application. 2

3 Features 1. Contact-switch and emergency stop 2. Light for control circuit 3. Motor start 4. Control light machine in operation 5. Motor stop 6. Control light overloading 7. Cutting length limiter 8. Power operation of back gauge 9. Adjustable dwell time 10. Fine adjustment of back gauge 11. Blade-clearance setting 12. Rake-angle setting 13. Digital reading of back gauge position All Darley "SSV" Shears are equipped with a 5-mode selector switch: 1. Controlled-cutting cycle: the blade carrier returns immediately after releasing the foot pedal. 2. Moment-command: the blade carrier always makes the complete cutting cycle 3. Stroke limitation device: infinitely adjustable zero to maximum cutting length 4. Automatic continuous stroking with infinitely adjustable time delay between strokes 5. A combination of 3 and 4 for unexcelled speed and productivity. Blade "inching." This device allows easy inching down of the top blade for setting clearances after turning or regrinding blades. By depressing the "+ " button, the ram will return to its top position, ready to cycle. Hydraulic control mono-block advantages: -Compact design -Easy exchange of components -"Cartridge" valve system The hydraulic hold downs work independently of each other, so that plates of variable thickness can be held. The pressure of the hold downs is adjusted independently of the cutting pressure, with either thin or thick plates. On the left side of the machine, the hold downs are mounted close together to prevent narrow strips from moving when being cut. Standard on the "SSV" is a 40" front-operated power back gauge with digital readout. The weight of the back gauge hangs on roller guides that run parallel to the lead screw. This prevents jamming and premature wear of the lead screw. One of the keys to the "SSV's" low-maintenance and accuracy is the roller guide assembly used in place of gibbs. The rollers are made of a selflubricating material that requires no clearance. This enables the "SSV" to maintain perfect blade clearance and extreme accuracy in shearing. 3

4 As an option, the "SSV" Shears can be equipped with either a hydraulic or pneumatic plate support system. The control of this system works so that during the shearing operation, the support arms retract, allowing the cut plate to fall away from the shear. The plate support can be easily switched off at which time, it will move into its neutral and protected position. 1. Motor 2. Coupling 3. Pump 4. Hydraulic control block 5. Left cylinder 6. Right cylinder 7. Safety valve to prevent overloading 8. Accumulator 9. Suction filter 10. Cutter beam 11. Hold downs -:- E,., cd-.. C- B F l 1 G l A 6 Model No. Capacity Stainless Mild Steel Steel (32Toniln 1 ) (50 Toniln 1 ) Cutting Length Rake Angle Strokes Per Minute (Full Length( Max. Rake Min. Rake Number of Back Gauge Hold Downs Range Front Gauge Main Motor Range (H.P.) Maximum Wort<ing Pressure (P.S..) Approximate Dimensions A B c D E F G Approx. We1ght Lbs. SSV toga. (5132").118" 8' 3" 0"30' tol 0 15' ' 5(1' ' 3'' 10' 3" 4' 4" 3' 1'8" 3' 5' 1" 11,880 SSV toga (5/32").11 8" 10' 1" 0"30' to 1 15' ()' 59" ' 10' 3" 4' 4" 3' 1' 8" 3' 5' 1" SSV /4".187" 8'3'' 0"30'!01 45' ' 5(1' '6" 10'3'' 4' 4" 3' 1' 8" 3' 5'5" 13,200 SSV310Q-6 1/4".187" 10' 1" 0"30'to 1' 45' ()' 5(1' ' 4" 10' 3" 4' 4" 3' 1' 8" 3' 5' 5" 14,520 SSV310Q ".236" 10' 1" 0"30' to2' '' 5(1' ' 8" 10' 3" 4' 4" 3' 1'8'' 3' 5' 11" Through Darley's continual development, variations in specifications and performance are subject to change without notice. 4

5 Darley GS 112" x 10' cap. General The Darley "GS" Shear is proven and functions under all possible situations in the plate working industry. t is famous for its rigidity, simplicity and its most important advantage, reliability! The swing beam system allows for stable and simple construction. A big advantage is that the arc movement of the knife beam results in very accurate cutting of the plate over the full length of the shear. The back gauge is mounted at the knife beam so that the same oscillating movement takes place. Because of this, there is no jamming of the cut plate. Features The side frames, bed and rear chute are of a single welded construction with a side frame gap. The chute design enables easy adaptation of material take-off units. The see-thru finger guard gives full safety protection while enabling the operator to feed material close to the blades, reducing scrap. Sheet clamping is applied by hydraufic hold downs that can be fitted with non-marking pads. The clamping force is applied prior to the movement of the shear beam, and becomes a function of the shear force when the top blade penetrates the material. The hold downs are released immediately before reversal of the shear beam, eliminating blade wipe. The shear beam pivots on self-al igning spherical bearings and is activated by heavy-duty cylinders mounted in the end frames. Darley makes their own cylinders to assure consistent quality. The shear beam can be inched down without power for blade setting after flipping or regrinding. The blade clearance adjustment is designed for rapid setting by means of a hand lever applied to the rear pivot eccentric, adjusting the blade clearance against a scale. No adjustment is required for the bottom blade. The heavy-duty, screw-operated power back gauge is front-operated and has a fu ll40" range. Readout is through a centrally located digital counter. The two 59" front support arms have inserted scales that are suitable for front gauging when used in conjunction with disappearing stops. The 59" side squaring arm also has an inserted scale for front gauging. Fluorescent lights are fitted on the top rear of the hold down beam. Together with the finger guard, they provide a safe and clear operator view for shadow line shearing. The unitized hydraulic power pack is designed for simplicity in operation and maintenance. Standard equipment includes, 40" frontoperated power back gauge, instant blade clearance adjustment, stroke length adjustment; shadow line lighting, 59" side squaring arm with inserted scales, two-59" front support arms with inserted scales, nickel chrome or shock-resistant blades, (depending on model), electric and hydraulics complete, operation and maintenance manual; service set, machine comes filled with oil. 5

6 f 77~ 7 ~ 1771/71 Blade Clearance Too Small t 77/z 7 ~ Blade Clearance Too Great Correct Blade Clearance Swing Beam System n swing beam cutting, the upper blade describes an arc around two pivots, which has a number of technical advantages. Because of the convenient blade gap adjustment on Darley shears, it's easy to maintain the proper blade clearance. This results in longer blade life. The back gauge moves with the offcut allowing the material to fall away freely. Because there are no gibbs that need clearance to operate, optimum precision and rigidity are maintained by using the swing beam principle with adjustable eccentric pivot points. Rapid Blade Gap Adjustment The adjustable eccentric pivots of the swing beam allow rapid setting of blade clearance. The pivot is rotated until the pointer corresponds to the thickness of material to be sheared. The sketches show the importance of this fast, accurate blade clearance setting. This setting is only necessary at one end of the shear as it automatically adjusts the blade gap over the total length of the shear. ndependent Sheet Clamping The Darley Shears' hydraulic hold downs operate independently of each other. This means they can clamp sheets of variable thickness firmly at each point. The pressure exerted by each of the hold downs is sufficient to prevent movement of the sheet, producing a straight accurate cut. The hold downs are positioned closer together at the left hand side of the machine for cutting narrow strips. The table is fitted with removable rails; this serves two functions. First, because of the small amount of material drag produced by the rails, feeding of plates is done with less effort than on a solid type table. Secondly, the support arms may be positioned anywhere by simply removing a rail and positioning the arm in the rail's place. The actual table on all Darley Shears is machined so that adaptation of material feeding units and pingauging arms is quite easy and inexpensive. Take The Shear To The Job Approximately 70% of all cutting jobs can be done by our compact Optishears (4' length) designed to be used anywhere in the factory. The machine can be lifted and positioned without the requirement of a special foundation. There is sufficient strength within the machine to cut at full capacity without the need to be bolted to the floor. This is useful when used in conjunction with larger shears maximizing productivity! 6

7 Features Simple controls, centrally located, make for short set-up time. 40" front-operated power back gauge along with variable stroke length are standard. By shortening the length of the stroke, there are more strokes per minute, increasing productivity. '-- A _[ c- LB f= ~ :-!, E.. ::: ::::1~,1... J 1 Motor 2 Coupling 3 Pump 4 Safety valve for overload 5 Main valve 6 Hold down 7 Main cylinder 8 Hand pump 9 High pressure cock 10 Safety valve 11 Accumulator 12 Lift cylinders Capacity Model No. Stainless Gapln Mild Steel Steel Cutting Side Rake (32 Tonlln 2 ) (50 Ton/ln 2 ) Lenglh Frames Angle Strokes No. of Back Front Max. Working Per Hold Ga. Ga. Main Motor Pressure Minute Downs Range Range (H.P.) (P.S..) L Approximate Dimensions 8 H A c Approx. Weight Lbs. GS2506 8' 3" 1' 15' GS ' 1" 1' 30' 1/4".187" 4" GS ' W' 1' 15' GS ' 4" 1' 20' ,270 10' 3" ,590 11' 10" 40" 59'' ,270 14' 1" ,010 15' 1" 7"2:' 5'3" 27W' 19W' 7' 2" 5'8" 27Vi' 19W' 7' 2" 5' 11" 27'12" 19W' 7' 2" 6'5" 31W 19Vi' 11,800 14,740 23,100 26,640 GS2508 8' 3" 1' 30' GS ' 1" n o 5/16".236" 4" GS ' W' 1' 30' GS ' 4" 1' 30' ,060 10' 2" , ' 10" 40" 59'' ,060 14' 1" ,060 15' 1" 7' 2" 5' 3" 27W' 19W' 7' 2" 5' 8" 27W' 19W 7' 2" 5' 11" 27W' 19'12" 7' 2" 6' 5" 31 W' 19'12" 11,000 16,500 23,100 26,400 GS2510 8' 3" 1 30' GS ' 1" 1 30' 3/8".314" GS3610 4" 12' Vi' 1' 30' GS ' 4" 1 30' GS1213 4' 1" zo GS2513 8' 3" zo GS3013 1/2".393" 10' 1" 4" zo GS ' W' 2' GS ' 4" 2' ,060 10' 3" , ' 10'' 40'' 59'' ,060 14' 1" ,060 15' 1" ,130 6' ,130 10' 3" '' 59'' 30 4,130 12' 2" ,130 14' 1" ,130 15' 1" 7"2:' 5'3" 27W' 19W' 7' 2" 5' 8" 27W' 19W' 7"2" 6' 11" 31W' 19W' 7' 2" 7' 3" 31W' 19W' 7' 5" 6' 3" 27 '12" 19'12" 7' 5" 6' 9" 31 W' 19'12" 7' 5" 6'9" 31 W' 19'12" 7' 5" 6' 11" 31W' 19W' 7' 5" 6' 11" 31W' 19W' 16,720 19,800 28,600 33,000 12,100 23,320 26,180 34,760 40,480 GS1216 4' 1" zo GS2516 8' 3'' zo GS3016 5/8".500' 10' 1" 4" zo GS ' W' zo GS ' 4" zo ,no 6' ,no 10' 3'' '' 59'' 30 3,770 12' 2" ,770 14' 1" ,770 15' 1" 7' S' 6' 3'' 27W' 19W' 7' 5" 6'9'' 27W' 19W' 7' 5" 6' 9'' 31W' 19W' 7'5" 6' 11" 31W' 19W' 7' 5" 6' 11" 31W' 19W' 13,640 25,300 28,600 34,980 40,700 GS1220 4' 1" Z0 30' GS2520 8' 3" Z0 30' GS3020 3/4".590'' 10' 1" 4" Z0 30' GS ' '12" Z030' GS ' 4" Z030' ,210 6' 5" ,210 10' 6" '' 59'' 40 4,210 12' 2" ,210 14' 1" ,210 15' 1" 7' 2" 6' 3" 32 '12" 19'12" 7' 5" 7' 1" 32W' 19'12" 7' 5" 7' 1" 32 '12" 19'12" 7' 10'' 7'7" 32 '12" 19'12" 7' 10'' 7'7" 32'12" 19'12" 21,120 28,600 33,000 44,000 57,200 GS1225 1".750'' 4'1" 4" 2'30' '' 59'' 40 3,800 6'5" 7'S' 6' 3'' 32'12" 19W' 23,100 Through Darley's continual developments, variations in specifications and performance are subject to change without notice. 7

Product instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E

Product instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E Product instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E The Trimfast Ream Cutters are reliable, high performance cutters that will give you the results you need quickly

More information

COMPACT hydraulic steelworker

COMPACT hydraulic steelworker COMPACT hydraulic steelworker The Compact 40 is the most compact steelworker in the range of hydraulic steelworkers. These machines are built using the long experience gained in the manufacturing and sales

More information

hydraulic steelworker

hydraulic steelworker C O M P A C T hydraulic steelworker The Compact 45 is the most compact steelworker in the range of Kingsland hydraulic steelworkers. Kingsland machines are built using the long experience gained in the

More information

Piranha Ironworkers All Share These Standard Features

Piranha Ironworkers All Share These Standard Features Piranha Single Operator Ironworkers provide: Industry leading cycle times punch holes in less time than other ironworkers Urethane Strippers Results in less part distortion, faster cycle times, no need

More information

Powerful Recycling. AZR-K single-shaft shredder and RSM granulator. economical robust powerful. Entsorgungstechnik

Powerful Recycling. AZR-K single-shaft shredder and RSM granulator. economical robust powerful. Entsorgungstechnik Entsorgungstechnik Powerful Recycling AZR-K single-shaft shredder and RSM granulator economical robust powerful The AZR-K 800 to AZR-K 2000 series of shredders and the RSM series of granulators deliver

More information

NEWMAR SERVICE SCHOOL

NEWMAR SERVICE SCHOOL NEWMAR SERVICE SCHOOL TRAINING INFORMATION GUIDELINE FOR FEBRUARY 2013 OUR PRODUCTS: NOVA DUAL PITCH AWNING G-2000/ G-1500 2 P a g e G-2085 G-5000 3 P a g e G-LINKS 4 P a g e NOVA/ G-2000/ G-1500 BASIC

More information

banner stands Supreme I Supreme II Axis LiteBanner Tripod Brochure Stands More

banner stands Supreme I Supreme II Axis LiteBanner Tripod Brochure Stands More banner stands Supreme I Supreme II Axis LiteBanner Tripod Brochure Stands More Supreme I roll-up banner stand The most Supremely designed retractable banner stand in the industry Change graphics easily

More information

Mitchell. Furniture Systems

Mitchell. Furniture Systems Mitchell Furniture Systems Withstand the Test of Time Many of our tables are still in use after 40 years. They last that long because we simply build them better. More Steel Our tables have a solid feel

More information

Hydraclaw Jacks. *dimensions are in mm. Powerful: 5 tonne capacity on head or toe. High Lift: 178mm. Fast Operation: 5.5mm lift per stroke

Hydraclaw Jacks. *dimensions are in mm. Powerful: 5 tonne capacity on head or toe. High Lift: 178mm. Fast Operation: 5.5mm lift per stroke Hydraclaw Jacks Powerful: 5 tonne capacity on head or toe High Lift: 178mm Fast Operation: 5.5mm lift per stroke Stable: Substantial base offers stability under load Versatile: Horizontal or vertical operation

More information

Fancort Presents PCB Depaneling Solutions for Scored or Tab-Routed Panels

Fancort Presents PCB Depaneling Solutions for Scored or Tab-Routed Panels Fancort Presents PCB Depaneling Solutions for Scored or Tab-Routed Panels 11 Why select Fancort as your depaneling vendor? 1. More choices of machines for scored or routed boards 2. More factory support

More information

CABLE CUTTING, STRIPPING AND CRIMPING TOOLS

CABLE CUTTING, STRIPPING AND CRIMPING TOOLS Cutting 38-39 Stripping 39 0 - CBE CUTTING, STRIPPING ND CRIMPING TOOS Ergonomic handles Surface protection High precision Flexibility With ergonomic handles and a specially The pliers are made of excellent

More information

Cassette-folding arm-awning markilux 990

Cassette-folding arm-awning markilux 990 Cassette-folding arm-awning markilux 990 Mounting instructions 1. Overview 1 Projection profile 2 Folding arm 3 Fabric 4 Console 5 Cassette 6 Covering cap 7 Wall bracket 2. Mounting brackets 2.1 Overview

More information

HYDE SHOE KNIFE. Bevel point. 4 3/8" x 7/8" Ref.: PEL DEXTER BLADE HANDLE. Ref.: PEL-34SE

HYDE SHOE KNIFE. Bevel point. 4 3/8 x 7/8 Ref.: PEL DEXTER BLADE HANDLE. Ref.: PEL-34SE RUSSEL MIXING KNIFE HYDE SHOE KNIFE DESTER SHOE KNIFE Ref.: FL-220059 Ref.: GS-0190300 Bevel point. 4 3/8" x 7/8" Ref.: AC-T5009 Spatula Spatula Round point Ref.: PEL-55600 DEXTER MILL BLADE DEXTER BLADE

More information

Thomas Scientific Swedesboro, NJ U.S.A.

Thomas Scientific Swedesboro, NJ U.S.A. Thomas Scientific Swedesboro, NJ 08085-0099 U.S.A. Wiley Laboratory Mill, Model 4 3375-E10 (115 V, 50/60 HZ) USE AND CARE OF CATALOG NUMBER: 3375-E10 Wiley Laboratory Mill, Model 4 (115 V, 50/60 HZ) UNPACKING

More information

Keencut. Evolution E2

Keencut. Evolution E2 0.2mm Guaranteed Accuracy That s 1:15000 Guaranteed Cutting Straightness! Flip over sub bench parking provides full unobstructed bench surface 5 year guarantee Evolution E2 ACCURACY In 1999 the original

More information

An affordable gem for everyone!

An affordable gem for everyone! weinor patio awning Topas An affordable gem for everyone! Open patio awnings Topas/ Topas MiniMax www.weinor.co.uk Topas 1 Open patio awnings Topas/ Topas MiniMax Topas with and without aluminium hood

More information

Mathey Dearman's revolutionary MagnaCut XM enables

Mathey Dearman's revolutionary MagnaCut XM enables Pipe and Plate Cutter & Welder (PATENTED) Mathey Dearman's revolutionary enables the welder and pipefitter to cut, bevel, and even weld steel pipe and steel plate without having to secure the machine to

More information

1612P MODEL 1612P SLICER MODEL EXECUTIVE OFFICES 701 RIDGE AVENUE TROY, OHIO FORM (4-95)

1612P MODEL 1612P SLICER MODEL EXECUTIVE OFFICES 701 RIDGE AVENUE TROY, OHIO FORM (4-95) 1612P MODEL 1612P SLICER MODEL 1612P ML-104587 EXECUTIVE OFFICES 701 RIDGE AVENUE TROY, OHIO 45374-0001 FORM 19370 (4-95) Installation, Operation, and Care of MODEL 1612P SLICER SAVE THESE INSTRUCTIONS

More information

PRODUCT MANUAL - M096

PRODUCT MANUAL - M096 PRODUCT MANUAL - M096 MODEL 270 ELECTRIC CAN OPENER 1 I. LABELS L087--CAUTION 2 II. SPECIFICATIONS MODEL NO. 270 POWER 115 VOLT, 1.5 AMP, 50-60HZ REQUIREMENTS 230 VOLT, 0.8 AMP, 50-60 HZ NORMAL SPEED 200-250

More information

1224 Splitter and CTO combo, setup instructions using the Panelview HMI

1224 Splitter and CTO combo, setup instructions using the Panelview HMI Knowledge Base Article Type: Instructions 1224 Splitter and CTO combo, setup instructions using the Panelview 1000+ HMI Description: Instructions on How to properly setup the 1224 Splitter and CTO/Clamp

More information

Mandolin Slicer Quite possibly the safest mandolin in the world

Mandolin Slicer Quite possibly the safest mandolin in the world Mandolin Slicer Quite possibly the safest mandolin in the world MANDOLIN & COMPONENTS Handle Upper Plate Safe Hands Food Holder Non-Slip Retractable Leg Julianne Blades (3 sizes) Waffle / Crinkle Cut Blade

More information

Contents. Awnings USA - Full Protective Hood Manual Instructions ft 11" - 11ft 6" Awnings

Contents. Awnings USA - Full Protective Hood Manual Instructions ft 11 - 11ft 6 Awnings Awnings USA - Full Protective Hood Manual Instructions Contents Warning We recommend that two or more people are required to lift the awning into place. 4ft 11" - 11ft 6" Awnings 8 x Expansion bolts **

More information

Levels & Measuring Tools

Levels & Measuring Tools Levels & Measuring Tools Quick, easy and accurate measurements can mean the difference between a job well done and one that misses the mark. Klein offers a variety of levels and other measuring devices

More information

PNEUMATIC TOOLS FOR PLASTIC APPLICATIONS

PNEUMATIC TOOLS FOR PLASTIC APPLICATIONS PNEUMATIC TOOLS FOR PLASTIC APPLICATIONS GATE CUTTING - DEGATING - ROBOTICS / AUTOMATIC INDUSTRIAL - MEDICAL - ELECTRONICS - EDUCATIONAL - GOVERNMENT CALL TOLL-FREE: 888-444-1202 WEBSITE: www.custom-products.com

More information

TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH

TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH www.danly.com PINS & BUSHINGS INCH Service We Deliver and Quality You Can Depend On DANLY IEM is a leading manufacturer of die sets and

More information

Technology working for you. From the Small Hand Feed Operation to Complete Engineered Plastic Granulator Systems

Technology working for you. From the Small Hand Feed Operation to Complete Engineered Plastic Granulator Systems Reprocessing Plastic Scrap into Valuable Regrind From the Small Hand Feed Operation to Complete Engineered Plastic Granulator Systems Technology working for you. Screenless Granulators Low speed (27 rpm)

More information

Transom concealed door closer DORMA RTS 85

Transom concealed door closer DORMA RTS 85 Transom concealed door closer DORMA RTS 85 DORMA RTS 85 Transom concealed door closer Disappears into the frame Ideal for shopfitting. For both double and single action doors. Elegant, versatile, practical

More information

I N ST R UC T I ON MODELS 1612E, 1712E & 1712RE SLICERS. FORM Rev. B (10-97) 1712RE 701 S. RIDGE AVENUE TROY, OHIO 45374

I N ST R UC T I ON MODELS 1612E, 1712E & 1712RE SLICERS. FORM Rev. B (10-97) 1712RE 701 S. RIDGE AVENUE TROY, OHIO 45374 I N ST R UC 1712E T I ON MODELS 1612E, 1712E & 1712RE SLICERS S ML-104546 ML-104547 ML-104548 1612E 1712E 1712RE 701 S. RIDGE AVENUE TROY, OHIO 45374 FORM 19238 Rev. B (10-97) TABLE OF CONTENTS GENERAL......................................................................

More information

Fiberglass Duct Tools 22\

Fiberglass Duct Tools 22\ Fiberglass Duct Tools 22\ Cutting Blade Excess Tie AUTO-CUT-OFF Breakaway spring mechanism automatically engages cut-off blade at desired tension setting. Adjustment Knob Manual A clean black baked on

More information

TOOLING COMPONENTS. tel fax Clamping Kits Step Blocks...7. Driver Studs...

TOOLING COMPONENTS.  tel fax Clamping Kits Step Blocks...7. Driver Studs... Clamping Kits... 2-8 Step Blocks...7 Driver Studs... 9-13 Bolts, Screws... 14-20 Nuts, Washers... 21-29 Sex Bolts... 30-31 Clamps... 32-44 Screws... 45-49 Knobs & Levers... 49-53 Rest Pads...54 Index Plungers...

More information

Notes, Parts List & Drawings

Notes, Parts List & Drawings Biomass Chopper/Cutter Notes, Parts List & Drawings Page 1 of 16 The Easy BioChop biomass chopper/cutter was designed to cut both wet and dry biomass and to accomplish a number of goals. The objectives

More information

Cross Folder AF-76 series. AF-76 series. Cross Folder AF-764AKLL/764AKL/762KLL/762KL. Accurate Cross Folding with Easy Operation

Cross Folder AF-76 series. AF-76 series. Cross Folder AF-764AKLL/764AKL/762KLL/762KL. Accurate Cross Folding with Easy Operation Cross Folder AF-76 series AF-76 series Cross Folder AF-764AKLL/764AKL/762KLL/762KL Accurate Cross Folding with Easy Operation 8-page, 16-page, and 32-page cross folding The AF-76 series folders are specially

More information

TOOLS. P. P. Cord PET STEEL

TOOLS. P. P. Cord PET STEEL TOOLS P. P. Cord PET STEEL Strapping tools are the most basic form of strap application equipment. For your convenience, our tools have been divided into four product lines for different strapping materials

More information

AFC-50 Automatic French Fry Cutter Instruction Manual

AFC-50 Automatic French Fry Cutter Instruction Manual AFC-50 Automatic French Fry Cutter Instruction Manual Fry Factory Inc. 67 Watts Ave, Charlottetown, PEI, C1E 2B7, Canada Phone: 902-368-2900 Fax: 902-368-8645 Email: info@fryfactoryinc.com Website: www.fryfactoryinc.com

More information

MAX Series 9514 OPERATOR S MANUAL

MAX Series 9514 OPERATOR S MANUAL MAX Series 9514 OPERATOR S MANUAL Persons under age 18 are not permitted to operate or have accessibility to operate this equipment per U.S. Dept. Of Labor Employment Standards Administration Fact Sheet

More information

TIN KNOCKER TK NO. 30 CLEAT BENDER INSTRUCTIONS & PARTS DIAGRAM. TK No. 30 CLEAT BENDER

TIN KNOCKER TK NO. 30 CLEAT BENDER INSTRUCTIONS & PARTS DIAGRAM. TK No. 30 CLEAT BENDER 1 TIN KNOCKER TK NO. 30 CLEAT BENDER INSTRUCTIONS & PARTS DIAGRAM TK No. 30 CLEAT BENDER Sheet Metal Equipment Sales Inc. Dean P. O'Connell, President Green Bay, Wisconsin Phone - (920)-662-9966 Fax -

More information

are greasable that the units *Positive indexing for raising roll down the track on and

are greasable that the units *Positive indexing for raising roll down the track on and We at the Thomas family have deep roots in the Maine tradition of craftsmanship and innovation. Dale Thomas began working with steel in 1959 and for almost five decades gained extensive experience in steel

More information

Section Ton Ram Operating Instructions for 1-1/4" through 4" Standard & Long Holedall Swaged Couplings

Section Ton Ram Operating Instructions for 1-1/4 through 4 Standard & Long Holedall Swaged Couplings 100 Ton Ram Operating Instructions for 1-1/4" through 4" Standard & Long Holedall Swaged Couplings Dixon Valve & Coupling Company 800 High Street Chestertown, MD 21620 ph: 800 355 1991 fax: 800 283 4966

More information

MACHETES & MACHETE SHEATHS HUDSON BAY AXE SINGLE EDGE AXE GUARD DOUBLE EDGE AXE GUARD LADDER PLATFORM. Machete CAT. NO.

MACHETES & MACHETE SHEATHS HUDSON BAY AXE SINGLE EDGE AXE GUARD DOUBLE EDGE AXE GUARD LADDER PLATFORM. Machete CAT. NO. Phone: 800-227-4255 www.hallssafety.com Fax: 724-458-0592 MACHETES & MACHETE SHEATHS Machete 2PMA18-18 Blade 2PMA22-22 Blade High quality machete. High carbon tempered steel blade. Black poly handle with

More information

GLM300 Semi-auto Slicer

GLM300 Semi-auto Slicer Frequency: Before each days use Division: Location: User: Supervisor: Preceda Code: Article Number:

More information

PARTS LIST CHARGER 2022 ABLT

PARTS LIST CHARGER 2022 ABLT PARTS LIST CHARGER 2022 ABLT HEAD ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 5990731 SPRING CLIP PAD HOLDER SET INCLUDES: 1 101A 9120205 #8 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW PACK OF 3 3 102 9121490

More information

PINS & BUSHINGS INCH

PINS & BUSHINGS INCH www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH Steel, Bronze & Self-Lubricating Friction & Ball Bearing Components www.danly.com PINS & BUSHINGS INCH Strategically located to serve

More information

Saw Blade Lube Systems

Saw Blade Lube Systems Environmentally Friendly Lubrication Saw Blade Lube Systems Cutting Edge Technology Saw Blade Lube Systems Cutting Edge Technology Cutting Edge Technology Unist saw blade lubrication systems deliver all

More information

Great quality on a budget. weinor Topas open awning.

Great quality on a budget. weinor Topas open awning. weinor Topas open awning Open patio awnings Topas/ Topas MiniMax Great quality on a budget The Topas open awning is a work of art, which everyone can afford it scores highly with many functions at a truly

More information

Please read this guide carefully. It tells you how to prepare your cutting plotter for production use in a few easy steps.

Please read this guide carefully. It tells you how to prepare your cutting plotter for production use in a few easy steps. OPERATING GUIDE for Secabo mini Cutting Plotter Congratulations on purchasing your Secabo mini cutting plotter! Please read this guide carefully. It tells you how to prepare your cutting plotter for production

More information

FORM (Apr. 2006)

FORM (Apr. 2006) 2212 Slcier MODEL 2212 SLICER MODEL 2212 ML-136132 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com FORM 35215 (Apr. 2006) Installation, Operation, and Care of MODEL 2212 Slicer

More information

Primrose Awnings - Full Cassette Manual & Electric Instructions

Primrose Awnings - Full Cassette Manual & Electric Instructions Primrose Awnings - Full Cassette Manual & Electric Instructions Contents Warning 2.0m - 3.5m Awnings 8 x Expansion bolts ** 2 x brackets 1 x Awning 1 x Winder 4.0m - 5.0m Awnings 12 x Expansion bolts **

More information

Emergency Stop Devices

Emergency Stop Devices New! Selection and Application of.. 278 Emergency Stop Rope Pull Switches........... 279 New! Emergency Stop Push Buttons............... 293 Banner Engineering Corp. Minneapolis, MN U.S.A. bannerengineering.com

More information

Shark Guard Installation

Shark Guard Installation Shark Guard Installation In the Package When you receive your Shark Guard, verify that nothing was damaged in shipping. Here is a current list of parts that should be included with a standard Felder and

More information

The safe & affordable install

The safe & affordable install QSLG1000 Quick-Sling SPECS QSLG1000 Each arm attaches to wood using 2 zip screws for stability & a 4 through bolt & wing nut for security. Installs to steel using steel beam adapters. 28 points of anti-vibration

More information

Primrose Awnings Half Cassette Manual & Electric Instructions

Primrose Awnings Half Cassette Manual & Electric Instructions Primrose Awnings Half Cassette Manual & Electric Instructions Contents Contents for 2m, 2.5m, 3m Awnings 2 x wall brackets 4 x expansion bolts (2 per bracket)** 1 x Awning Contents for 3.5m, 4m and 4.5m

More information

Knives, Cutters & Scrapers

Knives, Cutters & Scrapers Knives, Cutters & Scrapers - 261 - Utility Knives T23216 T232 T23218 Snap-Off Knives SK4 Steel blades Stores up to 3 replacement blades Blade sections snap off providing sharp cutting point Stainless steel

More information

DOOR - Single Leaf, Premium Duty, Quick-Acting Model 1430 Features 1

DOOR - Single Leaf, Premium Duty, Quick-Acting Model 1430 Features 1 DOOR - Single Leaf, Premium Duty, Quick-Acting Model Features 1 FREEMAN MARINE Quick-Acting doors feature patented chain-drive, single actuation dogging. This design feature allows for quick-acting doors

More information

SKID STEER ATTACHMENT

SKID STEER ATTACHMENT www.erskineattachments.com EXTREME HEAVY-DUTY BRUSH MOWER SKID STEER ATTACHMENT THE ULTIMATE MOWING MACHINE... Extreme jobs call for the Extreme Heavy-Duty Brush Mower. This mower is armored to withstand

More information

Wireless Wind Sensor Installation and Operation Instructions

Wireless Wind Sensor Installation and Operation Instructions WARNINGS: RETRACTABLE AWNINGS For Technical Support visit us at www.sunsetter.com/ownerscorner or Call Toll Free 800-670-7071 Fax 877-224-4944 Wireless Wind Sensor Installation and Operation Instructions

More information

Installation Instructions for the Rolltec Physique XL Awning

Installation Instructions for the Rolltec Physique XL Awning Installation Instructions for the Rolltec Physique XL Awning Questions? Call Rolltec at 1-800-667-0474 General Tool Requirements Table of Contents Available installation brackets Side dimensions of various

More information

Primrose Awnings Full Cassette Manual & Electric Instructions

Primrose Awnings Full Cassette Manual & Electric Instructions Primrose Awnings Full Cassette Manual & Electric Instructions Contents for Full Cassette Awning 1 x Remote control receiver box 2 x Remote hand-held zappers 1 x 5 metre cable 1 x Template sticker **The

More information

HINGES & STAYS. Hinges & Stays Large Take-Apart Hinge. Medium Take-Apart Hinge

HINGES & STAYS. Hinges & Stays Large Take-Apart Hinge. Medium Take-Apart Hinge Hinges & Stays HINGES & STAYS TAKE-APART-CONTINUOUS-WELD-ON-CONCEALED-STRAP-STOP-BUTT-OFFSET-LIFT-OFF-STAY 0.1 0-180800.0 Mat: Steel Finish: Zinc Plate Wt:.0kg /.1lbs.8. Acts as a hinge but allows quick

More information

Installation Instructions for the Rolltec Adalia X3M Extenda Awning

Installation Instructions for the Rolltec Adalia X3M Extenda Awning Installation Instructions for the Rolltec Adalia X3M Extenda Awning Questions? Call Rolltec at 1-800-667-0474 General Tool Requirements Table of Contents Available installation brackets Side dimensions

More information

The Thomas Series of. Dredge Pumps. thomas dredge pumps

The Thomas Series of. Dredge Pumps. thomas dredge pumps The Thomas Series of Dredge Pumps thomas dredge pumps 1 Thomas Simplicity Dredge Pumps The Thomas Simplicity dredge pump is engineered for your specific operation. Years of operation and many design improvements

More information

Forcible Entry Notebook

Forcible Entry Notebook Forcible Entry Notebook by Captain Robert Morris, L-28 Doors that Swing Toward You (Outward)--Part II Additional security may be installed on these doors by bolting a metal shield to protect the space

More information

This section shows our line of hand hacksaws, including our new bi-metal unique blades, hacksaw frames, PVC and compass saws. HAND SAWS AND BLADES

This section shows our line of hand hacksaws, including our new bi-metal unique blades, hacksaw frames, PVC and compass saws. HAND SAWS AND BLADES This section shows our line of hand hacksaws, including our new bi-metal unique blades, hacksaw frames, PVC and compass saws. HAND SAWS AND BLADES Bi-Metal Unique Saw Technology Decades ago, bi-metal blade

More information

For full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.

For full product information, visit  Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page. R Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 6-5480 www.cmafh.com Safety Interlock Switches TL19 Safety Interlock Switch with uard Door Locking High

More information

Stanley FatMax 1" Folding Pocket Chisel. Stanley Fatmax Magnetic Torpedo Level

Stanley FatMax 1 Folding Pocket Chisel. Stanley Fatmax Magnetic Torpedo Level New Products Stanley Plastic/Laminate scoring Knife Comfortable body with soft anti-slip grip. Chemical resistant handle. Blade storage in the handle, for either Stanley or OLFA blades (includes two Stanley

More information

STEEL ROLLERS. 1. FORMERS SUPPORTED ON BOTH SIDES Prevents twisting under heavy loading

STEEL ROLLERS. 1. FORMERS SUPPORTED ON BOTH SIDES Prevents twisting under heavy loading 102 PLUMBING TOOLS PIPE AND TUBE BENDERS With the IRWIN Hilmor range of tube benders, you can be ready to tackle any job with ease. All machines feature precision tooling to give a smooth, accurate bend

More information

SH, MP, HP, EZ-SH, EZ-MP, EZ-HP Series Design Features & Benefits COXREELS. SH, MP, HP, EZ-SH, EZ-MP, & EZ-HP Series Design Features

SH, MP, HP, EZ-SH, EZ-MP, EZ-HP Series Design Features & Benefits COXREELS. SH, MP, HP, EZ-SH, EZ-MP, & EZ-HP Series Design Features COXREELS SH, MP, HP, EZ-SH, EZ-MP, & EZ-HP Series Design Features The following are features and benefits of our Standard Heavy Duty and EZ Coil TM Series Reel 1. GUIDE ARM: The Coxreels guide arm is stamped

More information

RM 2125 Troubleshooting Guide

RM 2125 Troubleshooting Guide Problems, possible causes and corrective action Problem Cause Corrective Action 1) Thick and Thin Sections. a) Partial Sections b) Shorter Sections in ribbon c) Section thickness varies from one section

More information

Tidland Series 'C' Knifeholder MAINTENANCE MANUAL Crush Cartridge Class I, II, III Crush Slitting

Tidland Series 'C' Knifeholder MAINTENANCE MANUAL Crush Cartridge Class I, II, III Crush Slitting Tidland Series 'C' Knifeholder MAINTENANCE MANUAL Crush Cartridge Class I, II, III Crush Slitting Please read and understand all the instructions before you start to maintain the Tidland Series 'C' Knifeholder.

More information

Please read this guide carefully. It tells you how to prepare your cutting plotter for production use in a few easy steps.

Please read this guide carefully. It tells you how to prepare your cutting plotter for production use in a few easy steps. OPERATING GUIDE for Secabo C30 and C40 cutting plotters Congratulations on purchasing your Secabo cutting plotter! Please read this guide carefully. It tells you how to prepare your cutting plotter for

More information

WIN. Office & Print Room Solutions 15,995. Bindhub CB180 & CB200e Comb Binders UP TO 30% OFF. 65 Electric Stapler. HD320 Laminator 10% OFF

WIN. Office & Print Room Solutions 15,995. Bindhub CB180 & CB200e Comb Binders UP TO 30% OFF. 65 Electric Stapler. HD320 Laminator 10% OFF Office & Print Room Solutions Bindhub CB180 & CB200e Comb Binders UP TO 30% OFF 159 Inside 65 Electric Stapler WIN Your chance to 46 LCD TV is up for grabs! Promotion valid from Dec 2010 Feb 2011 SAVE

More information

Shark Guard SGK1 Installation

Shark Guard SGK1 Installation Shark Guard SGK1 Installation for riving knife based saws These instructions apply to numerous brand and model saws that we make guards for. This information is fairly generic and good for all those saws.

More information

TN5000 Titan Manual Rotary Microtome

TN5000 Titan Manual Rotary Microtome User Manual TN5000 Titan Manual Rotary Microtome Read Prior to Operation! Always keep this manual near the unit! WP47617 06.02.15 User Manual TN5500: Titan 888.708.5233 Info@TannerScientific.com www.tannerscientific.com

More information

Spring Hinge DA180 Technical Data Aluminium, Zinc, 304 & 316 Stainless Steel Anatomy of a Double Action Spring Hinge:

Spring Hinge DA180 Technical Data Aluminium, Zinc, 304 & 316 Stainless Steel Anatomy of a Double Action Spring Hinge: Spring Hinge DA18 Technical Data, Zinc, 4 & 16 Anatomy of a Double Action Spring Hinge: DA18 Adjustment Instructions: Model Adjustment Cap Tensed fastening pin Model Adjustment Cap Tube 4 or 16 SS Torsion

More information

DeLaval feed mixers Powerful and effective, robust and reliable

DeLaval feed mixers Powerful and effective, robust and reliable DeLaval feed mixers Powerful and effective, robust and reliable Stationary mixers better mixing, better feed A feed advisor s recommendations can often be very precise. But with DeLaval stationary mixers,

More information

Expand your mobility while adding comfort to your

Expand your mobility while adding comfort to your Expand your mobility while adding comfort to your daily activities with a Dolomite Rollator. Dolomite Rollators can improve the mobility of people with many different conditions, reducing their risk of

More information

1 Specifications. 2 1¼" through 4" Standard and Long Holedall Swaged Couplings

1 Specifications. 2 1¼ through 4 Standard and Long Holedall Swaged Couplings 100 Ton Ram Table of Contents Holedall Concept 1 Specifications 2 1¼" through 4" Standard and Long Holedall Swaged Couplings 3 1¼" through 4" Standard and Long Flanged Holedall Swaged Couplings using Collar

More information

Primrose Awnings Half Cassette Manual & Electric Instructions

Primrose Awnings Half Cassette Manual & Electric Instructions Primrose Awnings Half Cassette Manual & Electric Instructions Contents for 2.5m, 3m Awnings 4 x Expansion bolts (2 per bracket)** 2 x brackets 1 x Awning Contents for 3.5m, 4m Awnings 6 x Expansion bolts

More information

MODEL SDB BELT DRIVE CENTRIFUGAL DOWNBLAST ROOF EXHAUSTERS MODEL SDB - BELT DRIVE CENTRIFUGAL ROOF EXHAUSTER MODEL FEATURES

MODEL SDB BELT DRIVE CENTRIFUGAL DOWNBLAST ROOF EXHAUSTERS MODEL SDB - BELT DRIVE CENTRIFUGAL ROOF EXHAUSTER MODEL FEATURES BELT DIVE CENTIFUGAL DOWNBLAST OOF EXHAUSTES - BELT DIVE CENTIFUGAL OOF EXHAUSTE MODEL FEATUES Exhaust air up to 31,563 CFM in high static pressure applications up to 1-3/4 w.g. Attractive spun aluminum

More information

FILTERED FAN PACKAGES

FILTERED FAN PACKAGES FILTERED FAN PACKAGES PLASTIC & METAL FILTERED FANS EFFICIENT, QUITE BALL BEARING MOTORS NEMA TYPE 1 AND 3R ALL KITS INCLUDE GASKETS, HARDWARE, AND TEMPLATE UL LISTED Plastic FILTER FAN PACKAGES Injection

More information

How to operate TC-38A

How to operate TC-38A How to operate TC-38A 1. Installation 1 Support connection: Referring to the cover page of this INSTRUCTION MANUAL, fasten two small wrench bolts in backside by 6mm-wrench and fasten three large bolts

More information

Eaton ET Hydraulic Hose Saw INSTRUCTION MANUAL

Eaton ET Hydraulic Hose Saw INSTRUCTION MANUAL Eaton ET9100-07-110 Hydraulic Saw INSTRUCTION MANUAL INSTRUCTION MANUAL Eaton ET9100-07-110 Hydraulic Saw Table of Contents Introduction... 3 Old Method... 3 New Eaton Method... 3 Operation... 4 Operation

More information

Installation Instructions for the Rolltec Bravo Awning

Installation Instructions for the Rolltec Bravo Awning Installation Instructions for the Rolltec Bravo Awning Questions? Call Rolltec at 1-800-667-0474 Table of Contents Available installation brackets Side dimensions of various installations Determining installation

More information

INSTRUCTION MANUAL HYDM140

INSTRUCTION MANUAL HYDM140 INSTRUCTION MANUAL HYDM140 INSTRUCTION MANUAL Clean-Cuts HYDM140 Hydraulic Hose Saw Table of Contents Introduction... 3 Old Method... 3 New Clean-Cuts Method... 3 Operation... 4 Operation Procedure...

More information

INSTRUCTION MANUAL ALEKO RETRACTABLE AWNING

INSTRUCTION MANUAL ALEKO RETRACTABLE AWNING INSTRUCTION MANUAL for ALEKO RETRACTABLE AWNING www.alekoproducts.com FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY! 1 Important Safety Precautions WARNING NOTE: FOR PERSONAL SAFETY,

More information

1000M MANUAL Signature Series Slicer OPERATORS MANUAL

1000M MANUAL Signature Series Slicer OPERATORS MANUAL 1000M MANUAL Signature Series Slicer OPERATORS MANUAL Persons under age 18 are not permitted to operate or have accessibility to operate this equipment per U.S. Dept. Of Labor Employment Standards Administration

More information

Safety Interlock Switches

Safety Interlock Switches r Safety Interlock Switches TL19 TL19 Safety Interlock Switch with uard Door Locking High locking force of 10 N (270 lb.) locks guard door shut until machine is safe to enter IP67 (NEMA 6) enclosure enables

More information

Roller Bar End Cap (w/round Drive Shaft) Replacement Instructions for Vista and Motorized Awnings * Helpers needed *

Roller Bar End Cap (w/round Drive Shaft) Replacement Instructions for Vista and Motorized Awnings * Helpers needed * RETRACTABLE AWNINGS For Technical Support visit us at www.sunsetter.com/ownerscorner or Call Toll Free 800-670-7071 Fax 877-224-4944 Roller Bar End Cap (w/round Drive Shaft) Replacement Instructions for

More information

Tape Measure- 30' Magnetic. Dimensions and Weight Length 30' Descriptions. Manufacturer Information. Taxonomies, Classifications, and Categories

Tape Measure- 30' Magnetic. Dimensions and Weight Length 30' Descriptions. Manufacturer Information. Taxonomies, Classifications, and Categories 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 93430 Tape Measure- 30' Magnetic Klein Tools Catalog Number 93430 Manufacturer Klein Tools Description Weight per unit

More information

Maintenance and care of the. German Red Clipper and its blades

Maintenance and care of the. German Red Clipper and its blades BLADE SYSTEM One of the reasons for the superior cutting power of the German Red Clipper is its unique blade system: The pressure on the top blade can be adjusted according to the type of coat. If the

More information

Rittal Automation Systems

Rittal Automation Systems Do more, improve quality, increase revenue The business unit with its portfolio of services supports all process stages in control and switchgear engineering. From manual tools through to fully automated

More information

Flexible Punching Machine

Flexible Punching Machine Flexible Punching Machine Compact Punching, Nibbling and Forming TRUMATIC 2000 ROTATION Compact, Quick and Intelligent New Concepts in Punching Technology The TRUMATIC 2000 ROTATION rounds off the TRUMPF

More information

Specula Catalogue. Specula. Opening the eyes of the world.

Specula Catalogue. Specula. Opening the eyes of the world. Specula Catalogue Specula Opening the eyes of the world Variations of Specula Single Piece All Duckworth & Kent single piece specula are made from a single piece of titanium. There are no joints or welds

More information

Alien Flier Zip Line Products Installation/Owner s Manual

Alien Flier Zip Line Products Installation/Owner s Manual Alien Flier Zip Line Products Installation/Owner s Manual 1 Table of Contents SAFETY PLEASE READ CAREFULLY... 4 Constructing your Zip Line Xtreme Models... 6 Installing your Alien Flier Trolley on an Existing

More information

Tape Measure- 25' (7.62 m) Magnetic Double Hook, Rare earth. Magnetic Double End Hook. Rare earth magnetic double end hook

Tape Measure- 25' (7.62 m) Magnetic Double Hook, Rare earth. Magnetic Double End Hook. Rare earth magnetic double end hook 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 93225 Tape Measure- 25' Magnetic Klein Tools Catalog Number 93225 Manufacturer Klein Tools Description Tape Measure- 25'

More information

Bathroom. Toilet Aids. Folding Commode/Over Toilet Aid. Over Toilet Aid. Aspire Over Toilet Aid. Aluminium Over Toilet Aid

Bathroom. Toilet Aids. Folding Commode/Over Toilet Aid. Over Toilet Aid. Aspire Over Toilet Aid. Aluminium Over Toilet Aid Folding Commode/Over Toilet Aid 2 Can be used beside the bed as well as over the toilet 2 Includes commode pan, toilet seat, toilet lid & removable backrest 2 Steel frame with plastic seat 2 Folds for

More information

Set-It & Forget-It. save labor, save time. Applications include:

Set-It & Forget-It. save labor, save time. Applications include: Set-It & Forget-It save labor, save time ZERO tumble blast cabinets deliver efficient, affordable batch processing to clean, peen, deburr, or finish parts. Applications include: Remove residual sand from

More information

OPERATIONAL & MAINTENANCE MANUAL SEM Model 1400 Series Disintegrator Rev. 2

OPERATIONAL & MAINTENANCE MANUAL SEM Model 1400 Series Disintegrator Rev. 2 Security Engineered Machinery Co., Inc OPERATIONAL & MAINTENANCE MANUAL SEM Model 1400 Series Disintegrator Rev. 2 Security Engineered Machinery Co., Inc NATIONWIDE SERVICE Phone Toll Free 1(800)225-9293

More information

INSTALLATION SHEET. PARTS INCLUDED IN YOUR KIT. You may want to lay them out in this manner for accessibility.

INSTALLATION SHEET. PARTS INCLUDED IN YOUR KIT. You may want to lay them out in this manner for accessibility. INSTALLATION SHEET Gas Struts (x2) Lower Hinge Rail Side Rails (L and R) Spring Bows (x2-short Bed) (x3-long Bed) L Bars (L and R) with clamps included L Channel w/seal MISSING PARTS??? Call Extang at

More information

MODEL SDB BELT DRIVE CENTRIFUGAL DOWNBLAST ROOF EXHAUSTERS MODEL SDB - BELT DRIVE CENTRIFUGAL ROOF EXHAUSTER MODEL FEATURES

MODEL SDB BELT DRIVE CENTRIFUGAL DOWNBLAST ROOF EXHAUSTERS MODEL SDB - BELT DRIVE CENTRIFUGAL ROOF EXHAUSTER MODEL FEATURES BELT DRIVE CENTRIFUGAL DOWNBLAST ROOF EXHAUSTERS - BELT DRIVE CENTRIFUGAL ROOF EXHAUSTER MODEL FEATURES Exhaust air up to 8,098 CFM in high static pressure applications up to 1-3/4 w.g. Attractive spun

More information

PortesPivotantes PivotTüren Porta-a-Bilico PivotDoors Taatsdeuren Пивот-дверь от компании PuertasPivotantes. يروحملا بابلا 轴门 PortasPivotantes

PortesPivotantes PivotTüren Porta-a-Bilico PivotDoors Taatsdeuren Пивот-дверь от компании PuertasPivotantes. يروحملا بابلا 轴门 PortasPivotantes PortesPivotantes PivotTüren Porta-a-Bilico PivotDoors Taatsdeuren Пивот-дверь от компании PuertasPivotantes يروحملا بابلا 轴门 PortasPivotantes -90 0 0 90 90 2 165 mm 143 mm 8 mm 4 5 6 7 8 9 10 11 12 13

More information